Transcript
EMPLOYEE OWNED MADE IN THE U.S.A. • SINCE 1894 Dexter Commercial T-1200 Washer Specifications Dryer Dimensions / Capacity Dry Weight Capacity
Water
80 lb
Cabinet Height
58.0”
Cabinet Width
34.39”
(36.3 kg) (147.3 cm) (87.4 cm)
Overall Depth
45.38’’
(115.3 cm)
Door Opening
19.25”
(48.9 cm)
Water Inlet Size
3/4”
(19 mm)
Flow Rate (per min)
12 gal
(45.4 L)
Pressure (min/max)
10-130 psi
(69-896 kPa)
Approx. Water Usage
79.1 gal
(299.4 l)
Drain Diameter (O.D.)
3.0”
(7.6 cm)
Floor to Center of Drain
9.0”
(22.9 cm)
Electrical / Circuit Breaker / Running Amps / Wire Size Cylinder Diameter
30.0”
(76.2 cm)
Cylinder Depth
28”
(71.2 cm)
Cylinder Volume
Floor to Door Bottom Speeds G-Force (RPM)
11.5 cu.ft.
(326.0 L)
18.5”
(47.0 cm)
-12 (208-240/60/1 - 2 wire + ground)
20 amp / 8.4 amp / #12
-12 (208-240/60/3 - 3 wire + ground)
20 amp / 8.4 amp / #12
-59 (230/50/1 - 2 wire + ground)
20 amp / 8.4 amp / 3.5 mm2
Installation Recommendations
High Speed Extract
100 G
(485 RPM)
Intermed. Extract Speed
60 G
(375 RPM)
Washing Speed
.9 G
(43 RPM)
1060 lbs
(480.8 kg)
1099 lbs
(498.5kg)
63”
(160.0 cm)
36”
(91.4 cm)
52.14”
(132.7 cm)
Clearance Between Machines
1/2” (min)
(1.3 cm)
Clearance Behind Machines
24” (min)
(61.0 cm)
Concrete Thickness
8” (min)
(20.3 cm)
Approvals**
Net Weight - lb (kg) Shipping Dimensions: Shipping Weight Height - in (cm) Width - in (cm)
Depth - in (cm)
Front Rev. 37 - 7/18/2013
Side
Back
** Agency approvals may vary depending on configuration. Consult factory for details. For the most accurate information, please consult machine installation guide for all design and construction purposes. Due to continuous product improvements, design and specifications subject to change.
Part #0995-109-016
Available In
BLACK or Blue
DEXTER COMMERCIAL T-1200 WASHER Dexter Commercial Washers Are Designed, Tested And Manufactured To Ensure Superior Performance DEXTER T-1200 COIN WASHER FEATURES: RELIABLE DESIGN: ● Heavy-Duty Bearings In a Cast Iron Bearing Housing ● Welded Steel Spider And Shaft ● AISI 304 Stainless Steel Top, Front And Side Panels ● Fits Through a Standard 36” Doorway ● Sump-Less Outer Tub Design Saves Water On Every Cycle ● 10 Year Washer Warranty On The Frame, Tub, Cylinder, Shaft, Seals, Bearings & Bearing Housing ● 3 Year Parts Warranty
PERFORMANCE FEATURES ● 100 G-Force Extraction ● Perforated Cylinders And Raised Baffles For Superior Wash Action ● Easy To Modify Cycle Times, Temperatures And Programming ● Generate More Revenue Through Extended Cycle and Temperature Options ● Energy Efficient Inverter Drive Technology ● Rugged Frame Design Proven For Over Two Decades ● All Dexter Washer Designs Pass 1000 Hour Out of Balance Test
OPTIONS: ● Blue Or Black Graphics ● Available Coin-Op Or Debit Card Ready ● Capacities Available: 20lb, 30lb, 40lb, 60lb And 80lb
Ask your Dexter Authorized Distributor For More Details! www.dexter.com • 1- 800-524-2954
