Transcript
NEW
New Radio Transmission system
Uninterrupted by
NOISE!!
Ultra Precision Compact
TOUCH PROBE
Touch Probe
-1-
Uninterrupted by NOISE, New Radio Transmission System Conventional infra-red optical communication Affected by obstacles and coolant
Metrol's new wireless transmission system Uninterrupted by coolant or noise Adhesion of coolant Stable transmission
Adhesion of coolant Unreliable transmission Touch Probe Workpiece
Receiver Interruption in Communication
Touch Probe Workpiece
Receiver Stable transmission
・Selects the optimal channel automatically by searching the radio wave frequency band at all times. ・Designed for highly-reliable, noise resistant radio transmission. ・Compared to Optical Probes, radio probes are more suitable for Large Turnmill Centres and 5-Axis Machines for Precise measurement.
1µm Repeatability Proven Metrol design: four-point support, mechanical structure. No correction of software "lobing". Achieves 1μm (2σ) repeatability.
Energy saving!! 180 hours without a battery change Battery lasts for 180 hours under continuous use. 50% more energy saving compared to conventional infra-red optical communication system. No deterioration of accuracy with decreasing battery life.
Ultra compact - φ40 Ultra compact size - φ40mm. Ideal for compact machining centres and high-speed machines with small shanks. -2-
■System Structure
■Specifications Single direction repeatability 1.0 μm (2σ) *At the Speed of : 150 mm/min)
Receiver Shank Touch Probe
Signal transmission format
FSK (DSSS) wireless transmission format
No. of channels
37
Wireless frequency
2400MHz - 2480MHz
Power ON/OFF signal
M code (wireless signal)
Signal transmission range
Max. 15m
Receiver / interface
Receiver antenna-integrated interface
Sensing directions
5 directions ±X, ±Y, +Z
Contact Force (when using
XY:0.5N
50 mm straight stylus)
Z:5N
Overtravel
XY directions:±7° Z direction : 3 mm
Workpiece
Operating environment
For indoor use only
Waterproof design
IEC IP67
Storage temperature
-10℃ to 70℃
Operating temperature
Computer Numerical Control (CNC)
5℃ to 50℃
Weight (excluding a shank)
With battery : 290g Without battery : 280g
Within range of 15m, Radio wave channels of communication are uninterrupted by any obstacles in between the transmitter and receiver.
Battery
½AA lithium-thionyl chloride battery (3.6V) 1Time
Time until battery
After start of low battery indication
replacement
: approx. 1 hr
Low battery indication
Flashing of battery alarm LED (red)
Dead battery indication
Illumination of battery alarm LED (red)
Battery life
During standby : 200 days
(reference value)
5% use (72 min/day) : 87 days Continuous use : 180 hours
■Outer dimension
Standard Finger (F-R40T-405)
Sensor head (RC-K3E-002HJ)
Shank BT30 (H-BT30-001) Various options of Shanks are available on request.
φ40
RC-K3E-002-001S
More options of Fingers are available on request.
4 Sφ
9.5
40.5 (50)
50 (100)
-3-
[Standard accessories] *Receiver:RC-R02-001 *Output Cable(5m) :DC-R02-050 *½AA Lithium battery:BT-001-001 *Finger spanner:S907 *Finger wrench:HEX-0.89
Receiver
Improved visibility ・Improved visibility due to external mounting. ・No hassles of cleaning the coolant and chips as compared to conventional internally mounted units. Receiver
Touch Probe Receiver
Installation reference for Robot i series
RC-R02-001
Installation reference for Robo-drill
Wiring Diagram
(15)
BLUE
(28)
BLUE / BLACK VIOLET
22.5
50 90
2-M6 D8
VIOLET / BLACK GREEN GREEN / BLACK
Mounting surface view
4.7kΩ
WHITE
(172)
ORANGE RED
+24V (12V-30V) 0V
.2 φ1 0
31 28
15
73
(18
9)
-4-
Mo
un
) (11
7)
tin
gs
ERROR
PROBE STATUS 2b
GREEN / YELLOW
(72
+24V
SKIP 0V
BLACK
140
LOW BATTERY
SKIP +
GRAY Output cable
(Standard 5m DC-R02-050)
+24V
MACHINE START 0V
YELLOW
90 7.5
PROBE STATUS 1
MACHINE START +
BROWN
9
+24V
urf
ac
ev
iew
MACHINE GROUND
www.metrol.co.jp/en/RCK3E
■Optional Accessories 《Shank》
《Finger》
Various options of Shanks are available on request.
Size:BT30 Product No.H-BT30-001
More options of Fingers are available on request.
Size:BT40 Product No.H-BT40-001
Help desk We accept inquiry regarding sensor selection, exclusive specification, and technical matter through website, Fax, and Tel listed below.
+81-50-5558-7366 +81-42-528-1442
e-mail
[email protected]
www.metrol.co.jp/en Metrol Co., Ltd. Model : RC-K3E Power : 3.6V
R 001-A00026 CMIIT ID : 2012DJ3660 Made in Japan
FCC ID : AORMETROLRCK3E002
Metrol Co., Ltd. Model : RC-R02 Power : DC24V
R 001-A00052 CMIIT ID : 2012DJ3661 Made in Malaysia
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1-this device may not cause harmful interference, and 2-this device must accept any interference received. I n c l u di n g i n t e r f e r e n c e t h a t m a y c a u se u n desi r ed operation.
FCC ID : AORMETROLRCR02
The specifications and descriptions are subject to change without notice due to improvements in products. TOKYO JAPAN
METROL CO., LTD. 1-100 Takamatsu-cho Tachikawa, Tokyo 190-0011 JAPAN Tel: +81 50 5558 7366 / Fax: +81 42 528 1442
RCK3E-E-K002
-5-