Preview only show first 10 pages with watermark. For full document please download

Manual 12209417

   EMBED


Share

Transcript

Extend HDMI with Power Over Link Technology up to 330 feet 4K CINEMA 60Hz, 4:2:0 DCI, 4096 x 2160 HDCP 2.2 Features* The GefenPRO Extender for HDMI ELRPOL, using a single CAT-5 cable, extends a Hi-Def source with multi-channel digital audio at 4K Ultra HD to 330 feet (100 meters). A separate RJ-45 is provided, on both the Sender and Receiver Units, to extend Ethernet. Power is extended over the same CAT-5 cable and it supplies 5V of DC power to a power receptacle on the Receiver Unit. This exclusive Gefen feature allows for an additional product to be connected without using a separate power supply. The built-in IR back-channel provides additional control flexibility by sending IR commands to the A/V source equipment from the Receiver Unit. Use the IR Extender to increase the IR range when installing the product in a cabinet or behind additional components. RS-232 is extended using the built-in RS-232 serial interface. DVI-D is supported when using an HDMI to DVI Adapter, providing greater flexibility when integrating several components together. • Extends 4K Ultra HD (3840 x 2160 @ 60Hz, 4:2:0 or @ 30Hz, 4:4:4:), Ethernet, RS-232, and Bi-Directional IR over a single CAT-5e cable up to 330 feet/100 meters (8-bit color) • Extends 4K Cinema (DCI) (4096 x 2160 @ 24 or 30Hz 4:4:4), Ethernet, RS-232, and Bi-Directional IR over a single CAT-5e cable up to 330 feet/100 meters (8-bit color) • Extends HDMI at 1080p Full HD, Ethernet, RS-232, and Bi-Directional IR over a single CAT-5e cable up to 330 feet/100 meters (up to 12-bit Deep Color) • HDMI Features Supported: • HDMI 2.0 • HDCP 2.2 and 1.4 • 12-bit Deep Color • LPCM 7.1 audio, Dolby® TrueHD, Dolby Digital® Plus, and DTS-HD Master Audio™ pass-through • 3DTV pass-through • CEC pass-through • Lip Sync pass-through • Power over Line: Using Gefen POL technology, the Receiver unit is powered from the CAT-5 cable, and offers one +5V 2A output to power additional devices • IR back-channel to control any source equipment from the remote location • RS-232 extension • ELR and HDBaseT™ technologies allow extension up to 330 feet (100 meters) • Extends 100BaseT Ethernet to the remote location • Internal power supply at the Sender unit • +5V output with locking connector at the Receiver unit • Rack-mountable (using Gefen EXT-RACK-1U) How It Works Specifications* Connect the Hi-Def source to the GefenPRO Extender for HDMI ELRPOL Sender Unit using the included HDMI cable. Place the Receiver Unit next to the HDTV display or receiver and connect an HDMI cable from the Receiver Unit to the HDTV display. Connect a CAT-5 cable from the Link connector on the Sender Unit to the same connector on the Receiver Unit. The Ethernet ports on both the Sender and Receiver Units are connected to standard network devices. Connect the IR Extender cable to the Receiver Unit and connect the IR Blaster cable from the back of the Sender Unit to the Hi-Def source. Connect the RS-232 controller to the Sender Unit using the included RS-232 serial cable. Connect the RS-232 device to the Receiver Unit using an RS-232 serial cable. Connect the power cord from the Sender Unit to an available electrical outlet. The power connector on the Receiver Unit can be used to power an additional Gefen product. • • • • • • • • • • • • • • • • • • GEF-HDCAT5-ELRPOL Extend HDMI, Ethernet, and Power over Line to 330 feet 1080P Maximum Pixel Clock: 300MHz Maximum TMDS Clock: 300MHz Video Input Connector (Sender): (1) HDMI Type A 19-pin, female Video Output Connector (Receiver): (1) HDMI Type A 19-pin, female RS-232 Connector (Sender): DB-9, female RS-232 Connector (Receiver): DB-9, male Ethernet Connector (Sender / Receiver): RJ-45, Shielded Link Connector (Sender / Receiver): RJ-45, Shielded IR Extender Input (Receiver): 3.5 mm mini-stereo jack IR Extender Type (Receiver): EXT-RMT-EXTIR (available separately) IR Emitter Output (Sender): (1) 3.5 mm mini-mono jack Power Supply (Sender): 100 - 240V AC (Internal) Power Input Connector (Sender): IEC inlet with fuse-holder and power switch Power Indicator (Receiver) : LED, Red Operating Temperature: 32 °F to +113 °F (0 °C to +45 °C) Storage Temperature: -4 °F to +140 °F (-20 °C to +60 °C) Humidity: 20% to 90%RH, no condensation Dimensions (Sender / Receiver) (W x H x D): 8.3" x 1.7" x 6.7" (210mm x 43mm x 170mm) • Shipping Weight: 8 lbs (3.6 kg) Gefen, LLC | 20600 Nordhoff Street, Chatsworth CA 91311 | Tel. (818) 772-9100 (800) 545-6900 | Fax (818) 772-9120 | www.gefen.com * Features and specifications are subject to change without notice. All trademarks and registered trademarks are properties of their respective owners Copyright© 2015 Gefen LLC. VER. A4