Transcript
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Trimmer Potentiometers
Cat.No.R50E-16
R50E.pdf 08.8.26
PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note
R50E.pdf 08.8.26
sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Trimmer Potentiometers
1
SMD Open Type 2mm Size PVZ2/PVA2 Series PVZ2 Series 2.1
■ Features
0.5
4
1
1.3 2.2 2.7±0.3
0.5
0.45±0.1
Soldering Part
0.4
#1 #3 0.55 0.7 0.55
#2 #1 CLOCKWISE
PVZ2A
+0.10
2.1 0.8
0.8 -0.15
0.45±0.10 (0.6)
#2
4.8
1.3
2.2
2.4 Dia. *1
(0.6)
Soldering Part #1 #3 0.65 0.6 0.65
2. LCD 4. PHS 6. DVC 8. Portable audio, etc.
PVZ2R
∗1: Driver Plate Rotation Area
#2 #1 CLOCKWISE
#3
( Tolerancein: ±0.2 mm )
Power Rating (W)
Soldering Method
Number of Turns (Effective Rotation Angle)
Total Resistance Value
TCR (ppm/°C)
PVZ2p471C04
0.05(50°C)
Reflow/Soldering Iron
1(240°±10°)
470ohm ±30%
±500
PVZ2p102C04
0.05(50°C)
Reflow/Soldering Iron
1(240°±10°)
1k ohm ±30%
±500
PVZ2p222C04
0.05(50°C)
Reflow/Soldering Iron
1(240°±10°)
2.2k ohm ±30%
±500
PVZ2p472C04
0.05(50°C)
Reflow/Soldering Iron
1(240°±10°)
4.7k ohm ±30%
±500
PVZ2p103C04
0.05(50°C)
Reflow/Soldering Iron
1(240°±10°)
10k ohm ±30%
±500
PVZ2p223C04
0.05(50°C)
Reflow/Soldering Iron
1(240°±10°)
22k ohm ±30%
±500
PVZ2p473C04
0.05(50°C)
Reflow/Soldering Iron
1(240°±10°)
47k ohm ±30%
±500
PVZ2p104C04
0.05(50°C)
Reflow/Soldering Iron
1(240°±10°)
100k ohm ±30%
±500
PVZ2p224C04
0.05(50°C)
Reflow/Soldering Iron
1(240°±10°)
220k ohm ±30%
±500
PVZ2p474C04
0.05(50°C)
Reflow/Soldering Iron
1(240°±10°)
470k ohm ±30%
±500
PVZ2p105C04
0.05(50°C)
Reflow/Soldering Iron
1(240°±10°)
1M ohm ±30%
±500
Part Number
#3
∗1 Driver Plate Rotation Area: Please do not place any components more than 0.5mm in height within this area.
(Tolerance:in±0.2 mm)
■ Applications
*Available for other resistance value. Operating Temperature Range: -25 to 85 °C The blank column is filled with the code of adjustment direction and lead type A (top) or R (rear).
4
0.5 2.4 Dia. ∗1
#2
1. Ultra-small and thin external dimensions of 2.1(W)x2.7(L)x0.85 max. (T)mm. (Top adjustment type: PVZ2A_C04 Series) 2. Ultra-small and thin external dimensions of 2.1(W)x4.8(L)x0.9 max. (T)mm. (Rear adjustment type: PVZ2R_C04 Series) Compact PCB design is possible by smaller adjustment hole (3.0mm dia.) due to short wing length (4.8mm). 3. Au plated termination achieves a high density PCB mounting. 4. Cross-shaped driver slot allows for in-process automatic adjustment and it provides superior adjustability. 5. Two-piece parts construction achieves low cost and excellent quality. 6. Special resin substrate allows high peak temperature for reflow soldering. (PVZ2_Cxx Series)
1. Pick-up module 3. Cellular-phone 5. Pager 7. Digital camera
0.8±0.05
0.8
PDF catalog is downloaded from!CAUTION the website (for of Murata Manufacturing co., ltd. Therefore, it’s specifications areinsubject to change or oursmoking productsand/or in it may be discontinued without advance notice. Please check with our • Please read rating and storage, operating, rating, soldering, mounting and handling) this catalog to prevent burning, etc. !Note • This !Note
R50E.pdf 08.8.26
sales representatives or product engineers before ordering. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Construction
■ Standard Land Pattern PVZ2A
1
PVZ2A
0.6
■ Construction
0.7
1.55 1.55
0.85
0.85
0.9
0.6
(Tolerancein: ±0.1 mm)
■ Standard Land Pattern PVZ2R
PVZ2R 0.9 0.6
#2-Terminal
2.5
Driver Plate 3.0 Dia. #1-Terminal
Resistive Element #3-Terminal
Resin Substrate
0.6
2.5
Wiper
0.7
0.6
0.7
( Tolerancein: ±0.1 mm )
■ Characteristics Humidity Exposure
Res. Change: +10, -2%
High Temperature Exposure
Res. Change: R< =50kohm···+2, -10% 50kohm
