Transcript
EMPLOYEE OWNED MADE IN THE U.S.A. • SINCE 1894
Dexter OPL T-1450 Washer Specifications Industrial 80 Dimensions / Capacity Dry Weight Capacity
Water
90 lb
Cabinet Height
62.38”
(40.8 kg) (158.5cm)
Cabinet Width
41.5”
(105.4 cm)
Overall Depth
42.25’’
(107.3 cm)
Door Opening
19.25”
(48.9 cm)
Water Inlet Size
3/4”
(19 mm)
Flow Rate (per min)
12 gal
(45.5 L)
Pressure (min/max)
30-120psi
(207-827 kPa)
Drain Diameter (O.D.)
3”
(7.6 cm)
Floor to Center of Drain
8.3”
(21.1” cm)
Electrical / Circuit Breaker / Running Amps / Wire Size Cylinder Diameter
37.0”
Cylinder Depth Cylinder Volume
Floor to Door Bottom
Speeds G-Force (RPM)
(94.0cm)
-12 (208-240/60/1 - 2 wire + ground)
30 amp / 15 amp / #10
-12 (208-240/60/3 - 3 wire + ground)
30 amp / 15 amp / #10
22”
(55.9 cm)
13.7cu.ft.
(388.0 L)
Installation Recommendations
21.75”
(55.3cm)
Clearance Between Machines
1/2” (min)
(1.3 cm)
Clearance Behind Machines
24” (min)
(61.0 cm)
Concrete Thickness
12” (min)
(30.5 cm)
High Speed Extract
200 G
(617 RPM)
Intermed. Extract Speed
60 G
(338 RPM)
Washing Speed
.9 G
(39 RPM)
1382 lbs
(626.8 kg)
1420 lbs
(644.1kg)
68.5”
(174 cm)
43.12”
(109.5 cm)
48”
(121.9 cm)
Approvals**
Net Weight - lb (kg) Shipping Dimensions: Shipping Weight Height - in (cm) Width - in (cm)
Depth - in (cm)
Front
Rev. 41- 7/19/2013
Side
Back
** Agency approvals may vary depending on configuration. Consult factory for details. For the most accurate information, please consult machine installation guide for all design and construction purposes. Due to continuous product improvements, design and specifications subject to change.
Part #0995-109-037
DEXTER EXPRESS INDUSTRIAL T-1450 WASHER 30 CYCLE ON-PREMISE WASHER MODEL
Dexter On-Premise Washers Are Designed, Tested And Manufactured To Ensure Superior Performance DEXTER T-1450 OPL WASHER FEATURES: RELIABLE DESIGN: ● Heavy-Duty Bearings In a Cast Iron Bearing Housing ● Welded Steel Spider And Shaft ● AISI 304 Stainless Steel Top, Front And Side Panels ● 10 Year Washer Warranty On The Frame, Tub, Cylinder, Shaft, Seals, Bearings & Bearing Housing ● 3 Year Parts Warranty
PERFORMANCE FEATURES ● Powerful 200 G-Force Extraction ● 30 Programmable Wash Cycles Available ● Perforated Cylinders And Raised Baffles For Superior Wash Action ● Easy To Modify Cycle Times, Temperatures, Water Levels And Injection Source ● Energy Efficient Inverter Drive Technology ● All Dexter Washer Designs Pass 1000 Hour Out of Balance Test
OPTIONS: ● Capacities Available: 20lb, 30lb, 50lb, 60lb And 90lb
Ask your Dexter Authorized Distributor For More Details! www.dexter.com • 1- 800-524-2954
