Transcript
REVISIONS DESCRIPTION
REV GASKET
REVISED 285 TYPE I DRAWINGS TO SHOW FLANGE MOUNTING DIMENSIONS.
AC
CHG.NO.
APP'D
DATE
EC006521
JR
06/13/06
SEAL COVER
DUCT MOUNT PLATE
1/4" NPT PROCESS CONNECTION (ONE ON EACH SIDE)
REMOTE MOUNT HEAD
2" NPT THREADED ADAPTER BODY 2" NPT THREADED HALF-COUPLING (4)1/4" SHEET METAL SCREWS
WALL
ID
ODH
FLOW
LMH
CAUTION
FOR ACCURATE FLOW MEASUREMENT THE CORRECT HOLE SIZE IN PIPE MUST BE:
1-5/16 INCH
REMOTE MOUNT HEAD OPTION
(33mm)
DO NOT DRILL OVERSIZE DO NOT TORCH CUT HOLE
Product Discontinued December 2009
*ALL DIMENSIONS ARE NOMINAL AND ARE FOR REFERENCE ONLY
®
TYPE I
*UNLESS OTHERWISE SPECIFIED DIMENSIONS IN INCHES (MM)
jrumsey
DR.
BOULDER, COLORADO
01/17/05 TITLE
APPROVAL DRAWING TAGGING SPECIALS
M.Montgomery
03/25/05
SIZE
DIMENSIONAL DRAWING FOR 285 SENSOR SIZE 2 ANNUBAR, DUCT MOUNT WITH COMPRESSION FITTING
C
SCALE: NONE
DRAWING NO.
00285-1005 SHEET
1
OF
5
NOTES:
1.
1.
ROSEMOUNT INC. CERTIFIES THIS DRAWING IS IN ACCORDANCE WITH ROSEMOUNT ENGINEERING SPECIFICATIONS AND ACCURATELY REPRESENTS THE EQUIPMENT FURNISHED.
2.
ANNUBAR PRIMARY FLOW ELEMENT IS ACCURATE ONLY WITH CORRECT SIZED DRILLED MOUNTING HOLE. NO TORCH CUT ALLOWED. TOLERANCE +.030/-.000 (+.8mm/-.000mm)
3.
SENSOR ORIENTATION SHOWN FOR DETAIL ONLY. FOR ACTUAL RECOMMENDED LOCATION AND ORIENTATION REFER TO PRODUCT DATA SHEET 00813-0100-4028, AND THE QUICK INSTALLATION GUIDE (QIG) 00825-0100-4031.
4.
FIELD WELD. REFER TO INSTALLATION INSTRUCTIONS FOR WELD REQUIREMENTS.
5.
MAXIMUM PRESSURE: 10 PSIG; MAX TEMPERATURE: 300°F FOR INTEGRAL TRANSMITTER MOUNTING AND REMOTE MOUNTING.
6.
FOR MODEL SELECTIONS, REFER TO ROSEMOUNT PRODUCT DATA SHEET 00813-0100-4028.
7.
FOR REMOTE MOUNT INSTRUMENT CONNECTIONS, ORIENTATION OF INSTRUMENT CONNECTION ASSEMBLY IS FOR REFERENCE ONLY, UNLESS OTHERWISE NOTED. FOR COMPLETE INSTRUCTIONS, REFER TO PRODUCT DATA SHEET 00813-0100-4028, AND THE QUICK INSTALLATION GUIDE (QIG) 00825-0100-4031.
8.
FOR REMOTE MOUNT INTEGRAL ORIENTATION, ASSEMBLY IS THE SAME ON HORIZONTAL OR VERTICAL LINE.
® BOULDER, COLORADO
SIZE
A
SCALE:
FSCM.NO. 1:2
WT.
DRAWING NO.
00285-1005 SHEET:
2
of
5
GASKET LOCKING PIN
SEAL COVER
DUCT MOUNT PLATE VALVE BONNET ASSEMBLY
DIRECT MOUNT, INTEGRAL 3-VALVE MANIFOLD / HEAD
2" NPT THREADED ADAPTER BODY 2" NPT THREADED HALF-COUPLING
(4)1/4" SHEET METAL SCREWS
WALL
ID
ODH
C
FLOW
LMH
B D
CAUTION
D
2
FOR ACCURATE FLOW MEASUREMENT THE CORRECT HOLE SIZE IN PIPE MUST BE:
1-5/16 INCH
(33mm)
DIRECT MOUNT HEAD OPTION
DO NOT DRILL OVERSIZE DO NOT TORCH CUT HOLE
® BOULDER, COLORADO
SIZE
A
SCALE:
FSCM.NO. 1:4
WT.
DRAWING NO.
00285-1005 SHEET:
3
of
5
5.81 (148mm) 2024 TRANSMITTER
4.06 (103mm)
2X GASKET - GLASS FILLED TEFLON (PTFE)
DIRECT MOUNT, INTEGRAL 3-VALVE MANIFOLD / HEAD 5.42 (138mm)
4X STUD - ASTM A193-B7
4X NUT - ASTM A194
2.49 (63mm) 1/4" NPT
1.50 (39mm)
DIRECT MOUNT ELECTRONICS CONNECTION PLATFORM WITH 2024 TRANSMITTER ATTACHED 2.88 (73.2mm)
®
OPTIONAL 951 DRY GAS TRANSMITTER (REMOTE MOUNT ONLY)
BOULDER, COLORADO
SIZE
A
SCALE:
FSCM.NO. 1:4
WT.
DRAWING NO.
00285-1005 SHEET:
4
of
5
1/4" x 1/2" NPT ADAPTER 1/4" NPT BALL VALVE 1/4" NPT CLOSE NIPPLE FLANGE x 1/2" NPT 3-VALVE MANIFOLD
REMOTE MOUNT HEAD
7.13 OPEN (181.1mm)
REMOTE MOUNT ELECTRONICS CONNECTION PLATFORM WITH BALL VALVES 2.50 OPEN 63.5mm)
1/4" NPT BALL VALVE
1/4" NPT CLOSE NIPPLE
REMOTE MOUNT HEAD
3.75 (95.3mm)
4.33 (110mm)
OPTIONAL REMOTE MOUNT 3-VALVE MANIFOLD ®
REMOTE MOUNT ELECTRONICS CONNECTION PLATFORM WITH NEEDLE VALVES
BOULDER, COLORADO
SIZE
A
SCALE:
FSCM.NO. 1:2
WT.
DRAWING NO.
00285-1005 SHEET:
5
of
5
