Transcript
Manual 2010/11
Better, by Design Usually in the world of sound and cinema, you have to choose between great design and great performance. There are exceptions of course, but in general, that’s the way it is. Especially when it comes to loudspeaker design; if it looks good, it’s unlikely to sound good, and for some reason, if it sounds good, it very rarely looks good. At Artcoustic, we have never accepted this idea. So when you buy an Artcoustic speaker, you get the best of both worlds. They sound great, because we have brought years of knowledge and experience to bear on designing speakers that reproduce music and movie soundtracks faithfully, accurately and in breathtaking detail and they appeal to the eye because we came up with the idea of interchangeable screens. Quite simply, you choose how your speakers look. We have a wide portfolio of beautiful patterns and designs, and of pictures from artists and photographers including an array of iconic images from the Getty Images Gallery. We also offer a bespoke printing service where you can provide an image, for example a commissioned artwork or photograph, and we print this on to screens for your speakers. As the screens are interchangeable the image can be changed whenever you like. You choose how your speakers look, so they always complement rather than conflict with any interior design.
Going back to the roots of traditional Danish loudspeaker design, Artcoustic has transformed the conventional loudspeaker with a modern look. We strive for perfect sound reproduction, using only the most advanced technology available. Artcoustic is a state-ofthe-art product, a loudspeaker that is among the elite of high-end loudspeakers worldwide. The remarkable dynamic range and efficiency, far higher than conventional hi-fi designs, make Artcoustic loudspeakers the perfect solution for both high-end residential and commercial applications. The Artcoustic loudspeaker is the first and only of its kind, combining a unique mix of art and design with the science of acoustics. Great looks, great sound. Great news.
Design Options Artcoustic loudspeakers have an almost infinite choice of options, but the basics are simple and always a good place to start.
Cabinet Colours There is a choice of cabinet colours for your speaker Black
White
RAL
Artcoustic Match System The Artcoustic Match System is an in-house developed textile process . The 8 colours available for the loudspeaker screens provide the opportunity to match colours to complement your interior. It has never been easier to change the look of your loudspeakers and make them a part of your interior. Use the colour swatches below as a guide.
1
2
3
4
5
8
7
6
Artcoustic Gallery Artcoustic hand-picks artists and designers from around the world and invites them to create exclusive artworks for the Artcoustic Art Portfolio. The portfolio is available for viewing at all specialist Artcoustic dealers. View our latest selection on the Gallery section of the Artcoustic web site. Each artwork/design is produced as a digital print and hand made into a screen.
F
R
A
CREATE
M
E
S
FREEDOM
View the latest art portfolio online at www.artcoustic.com or request a copy via the contact page or at your local Artcoustic dealer.
A r t c o u s t i c A r t P o r t f o l i o e d i t i o n 1 2 0 0 8
w w w . a r t c o u s t i c . c o m
Bespoke The Artcoustic bespoke service gives the option of creating a unique design. Front screens can be printed with a clients design or commissioned work. Cabinet colours can also be custom coloured using the RAL colour system
Artcoustic product range
Modular One H:250 W:78 D:54mm
Superstar Active H:650 W:500 D:130mm
Modular LCR H:78 W:650 D:54mm DFF120-43 H:1200 W:430 D:153mm
Modular Cinema H:78 W:650 D:54mm Superstar Passive H:650 W:500 D:130mm
Diablo Target H:200 W:200 D:73mm
DF65-50 H:650 W:500 D:97mm Diablo Monitor H:330 W:270 D:73mm DFF180-43 H:1800 W:430 D:153mm
Diablo C-1 H:126 W:650 D:85mm DF75-55 H:750 W:550 D:133mm
DF-Multi 42 inch H:150 W:1030 D:74mm
DF-Multi 50 inch H:150 W:1220 D:74mm
DF100-75 H:1000 W:750 D:133mm
DF-Multi 60 inch H:200 W:1500 D:85mm DFC150-36 H:1500 W:360 D:133mm
DFF180-43PRO H:1800 W:430 D:177mm
80
1800
Spitfire Studio Monitor H:500 W:500 D:150mm
Spitfire Venue PA. Monitor H:500 W:360 D:160mm
DFS120-43 Sub H:1200 W:430 D:177mm
Spitfire 4-2-1 PA. Monitor H:840 W:800 D:186mm
Spitfire Subwoofer H:840 W:500D:186mm
DFS180-43 Sub H:1800 W:430 D:177mm
PA-260 2 channel professional power amplifier
Linax Sub H:312 W:1060 D:520mm
Panel Sub Micro H:450 W:450 D:186mm
Panel Sub Duo H:800 W:500 D:186mm
Linax 4U+ Front view
Linax Duo Storage Cabinet H:312 W:1060 D:520mm
Linax 4U+ Front view
Linax 4U+ Front view
Linax 4U+ Front view
Linax 4U+ Front view
Linax 4U+ Front view
Linax 4U+ Front view
Linax 4U+ Front view
Media Walls Single plate: H:1060 W:1060 D:28mm (Illustration above includes 6 plates)
Modular One Multi Purpose On-Wall and In-Wall Loudspeaker Screen options
Cabinet colour
M
Di
Match Digital System Print
Black White
Modular Range Technical highlights Front
Modular One Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Back
250
Terminals
79
Highly linear suspension and Low loss surrounds for high clarity and clean transient response Copper caps for better HF extension and lower distortion Distortion Reduced Motor
125
100
Side w. grille
Full range unit:
54
Modular One 1 way Multi purpose loudspeaker. 2 x 3.5 inch full range unit. All screen options are available for the Modular One: The Match System and Digital Prints when supplied with optional baffles.
Operating Range: Beamwidth HF: FR: Connections: Dimensions: Weight:
100 Hz to 20 KHz 90 degree SPL 1 Watt 88dB Max SPL 100 dB avg 4 ohm continuous power handling 100 W Gold plated push terminals, single amp 250 H x 78 W x 54 D mm depth (with grille 68 D mm) 2 kg each
Applications 2-channel stereo max. SPL 1m 100dB max. SPL 4m 92dB Home Cinema, small room max. SPL 1m 100dB max SPL 4m 92dB Restaurant - Bar - fixed installation max. SPL 1m 100dB max SPL 4m 92dB.
Modular Centre/LCR Left / Centre / Right On-Wall and In-wall Loudspeaker Screen options
Cabinet colour
M Match System
Black White
Modular Range Technical highlights Modular Cinema Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Back 105
Front R
Centre
179
Highly linear suspension and Low loss surrounds for high clarity and clean transient response Copper caps for better HF extension and lower distortion
Front L
78
98
Full range unit:
Distortion Reduced Motor Front
135
135
Side w. grille
Front 650
54
Modular Centre/LCR Operating Range: Beam width HF: FR: FR: FR: Front and Centre in parallel:
100 Hz to 20 KHz 90 degrees L & R SPL 1 Watt 86 dB Max SPL 98 dB avg 8 ohm continuous power handling 100 W Centre SPL 1 Watt 86 dB Max SPL 98 dB avg 8 ohm continuous power handling 100 W Rear SPL 1 Watt 86 dB Max SPL 98 dB avg 8 ohm continuous power handling 100 W SPL 1 Watt 102dB Max SPL 108 dB avg 3.3 ohm continuous power handling 100 W
Applications
Connections: Dimensions: Weight:
Gold plated push terminals, single / bi, tri and quad amp, L,C,R and rear 78 H x 650W x 54 D mm (With grille 68 D mm.) 6 kg each
2-channel stereo max SPL 1m 100dB max. SPL 4m 92dB Multi Channel Home Cinema, small - medium room max SPL 1m 100dB max SPL 4m 92dB (Centre Channel) Home Cinema, small - medium room , screening room max SPL 1m 108dB max SPL 4m 98dB
Modular Cinema Left / Centre / Right and optional Rear On-Wall and In-wall Loudspeaker Screen options
Cabinet colour
M Match System
Black White
Modular Range Technical highlights Modular Cinema Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Back 174.5
98
Rear R
Centre
100.5 Rear L
74
Highly linear suspension and Low loss surrounds for high clarity and clean transient response Copper caps for better HF extension and lower distortion
Front L
78
Front R
105
Full range unit:
Distortion Reduced Motor Front
135
135
Front
Side w. grille
650
54
Modular Cinema Operating Range: Beam width HF: FR: FR: FR: Front and Centre in parallel:
100 Hz to 20 KHz 90 degrees L & R SPL 1 Watt 86 dB Max SPL 98 dB avg 8 ohm continuous power handling 100 W Centre SPL 1 Watt 86 dB Max SPL 98 dB avg 8 ohm continuous power handling 100 W Rear SPL 1 Watt 86 dB Max SPL 98 dB avg 8 ohm continuous power handling 100 W SPL 1 Watt 102dB Max SPL 108 dB avg 3.3 ohm continuous power handling 100 W
Applications
Connections: Dimensions: Weight:
Gold plated push terminals, single / bi, tri and quad amp, L,C,R and rear 78 H x 650W x 54 D mm (With grille 68 D mm.) 6 kg each
2-channel stereo max SPL 1m 100dB max. SPL 4m 92dB Multi Channel Home Cinema, small - medium room max SPL 1m 100dB max SPL 4m 92dB (Centre Channel) Home Cinema, small - medium room , screening room max SPL 1m 108dB max SPL 4m 98dB
Modular One 35-27 and 65-50 baffles for on-wall and in-wall installations Modular 35-27 Baffle
78.50
Baffle
Modular 35-27 Grille
Grille
270
20.55
330
350
250
Modular 65-50 Grille
Modular 65-50 Baffle
78.50
500
20.55
In-wall / in-ceiling mounting holes 447
597
650
Key hole mounting bracket
Wall
Modular Cinema 42” and 50” baffles for on-wall and in-wall installations
120
20.55
78.55
Modular Cinema 42” baffle
1023
20.55
78.55
Modular Cinema 50” baffle
In-wall mounting holes
120
Wall
1220
Diablo Target Multi Purpose Loudspeaker Screen options
Cabinet colour
M Match System
White
Diablo Target Technical highlights Front
Side
Diablo Monitor Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Back 100
73
Tweeter: Dual Ring Radiator diaphragm
50
Top
200
Highly linear suspension and Low loss surrounds for high clarity and clean transient response Copper caps for better HF extension and lower distortion
Bottom 48
Wave-guide center plug, copper-clad aluwire Terminals
Woofer:
48
200
Extra long excursion and Aluminum Short Circuiting Ring
Diablo Target
4-layer voice coil, anodized aluminum for improved heat dissipation.
2-way Multi purpose loudspeaker. 1 x 5.5 inch LF-MF unit, 1 x 1.5 inch 90 degree X2 HF unit. Only the Match System screens are available for this model.
Distortion Reduced Motor Rigid Cast Steel Basket Crossover:
Operating Range: Beamwidth HF: FR: LF: HF: Connections: Dimensions: Weight:
60 Hz to 40 KHz 90 degree SPL 1 Watt 91dB Max SPL 103 dB avg 8 ohm continuous power handling 150 W Max SPL 103 dB avg 8 ohm continuous power handling 150 W Max SPL 104 dB avg. 4 ohm continuous power handling 100 W Gold plated screw terminals, single amp 200 H x 200 W x 69 D mm depth (with grille 85 D mm) 3.5 kg each
Linear Phase 6 and 12 dB per octave
Applications 2-channel stereo / near field studio monitoring max. SPL 1m 103dB max. SPL 4m 95dB Home Cinema, small - medium room max. SPL 1m 103dB max SPL 4m 95dB Restaurant - Bar - fixed installation - boardroom, auditorium max. SPL 1m 103dB max SPL 4m 95dB.
Diablo Monitor X2 Studio Monitor Loudspeaker Screen options
Cabinet colour
M Black White RAL Front
Side
Diablo Monitor Technical highlights
Back Diablo Monitor Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
135 104
73
165
Top 330
330
Tweeter: Dual Ring Radiator diaphragm Highly linear suspension and Low loss surrounds for high clarity and clean transient response Copper caps for better HF extension and lower distortion
Bottom
Wave-guide center plug, copper-clad aluwire 70
Tweeter Setting, (0) flat, (1)+4dB<5kHz
Di
Match Digital System Print
Gloss
Terminals
270
78
Woofer: 70
Extra long excursion and Aluminum Short Circuiting Ring
Diablo Monitor X2
4-layer voice coil, anodized aluminum for improved heat dissipation.
2-way Studio Monitor. 1 x 5.5 inch LF-MF unit, 2 x 1.5 inch X2 HF unit. All screen options are available for the Diablo Monitor: The Match System/Digital Prints.
Distortion Reduced Motor Rigid Cast Steel Basket Crossover: Linear Phase 6 and 12 dB per octave
Operating Range: Beamwidth HF: FR: LF: HF: Connections: Dimensions: Weight:
45 Hz to 40 KHz 90 degree X2 SPL 1 Watt 93dB Max SPL 104 dB avg 8 ohm continuous power handling 150 W Max SPL 104 dB avg 8 ohm continuous power handling 150 W Max SPL Switch setting (0) 106 dB, setting (1) 114 dB avg 4 ohm continuous power handling 100 W Gold plated push terminals, single amp 330 H x 270 W x 73 D mm 4.5 kg each
Applications 2-channel stereo / mid field / fullspace studio monitoring max SPL 1m 104dB max. SPL 4m 98dB Home Cinema, small - medium room, screening room max SPL 1m 104dB max SPL 4m 98dB Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 104dB max SPL 4m 98dB
Diablo C-1 X2 Multi Purpose Stereo or Mono Monitor Screen options
Cabinet colour
M Black White RAL
Match System
Gloss
Diablo C-1 Technical highlights
85
Top
Diablo C-1 Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Bottom
Tweeter: Dual Ring Radiator diaphragm Highly linear suspension and Low loss surrounds for high clarity and clean transient response
Front
126
Copper caps for better HF extension and lower distortion Wave-guide center plug, copper-clad aluwire
Tweeter Setting, (0) flat, (1) +4dB<5kHz
650
Input right 325
60
30
Input left
Aluminum Short Circuiting Ring
63
63
Woofer:
Side
Back
4-layer voice coil, anodized aluminum for improved heat dissipation.
58
Distortion Reduced Motor
Diablo C-1 X2 Stereo and mono
Rigid Cast Steel Basket
2-way Studio Monitor. 2 x 4 inch LF-MF units, 2 x 1.5 inch 90 degree X2 HF unit. Only the Match System screens are available for this model.
Crossover:
Operating Range: FR:
Applications
Connections: Dimensions: Weight: Mount:
70Hz to 40KHz SPL 1 Watt (single speaker) 94dB Max SPL 112dB avg 8 ohm continuous power handling 220 Watt (stereo) 91dB Max SPL 105dB avg 4 ohm continuous power 110 Watt Gold plated push terminals, single speaker or stereo connection 650 H x 126 W x 85 D mm 6 kg each wall mount
Linear Phase 6 and 12 dB per octave
2-channel stereo max SPL 1m 108dB max SPL 4m 102dB Home Cinema, small - medium room, screening room max SPL 1m 108dB max SPL 4m 102dB Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 108dB max SPL 4m 102dB
DF65-50 X2 Full Range Studio Monitor Loudspeaker Cabinet colour
Screen options
M
DF65-50 Technical highlights 25
250
650
104
DF65-50 Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Top
Tweeter: Dual Ring Radiator diaphragm Highly linear suspension and Low loss surrounds for high clarity and clean transient response Copper caps for better HF extension and lower distortion
Terminals 32
325
Bottom
85
97
65
25
Wave-guide center plug, copper-clad aluwire Woofer:
85
Tweeter Setting, (0) flat, (1) +4dB<5kHz
104
650
Side
Back
Front
25
500
Di
Match Digital System Print
White RAL
600
Black
Extra long excursion and Aluminum Short Circuiting Ring
DF65-50
4-layer voice coil, anodized aluminum for improved heat dissipation.
2.5-way Full Range Studio Monitor. 2 x 5.5 inch LF-MF units, 2 x 1.5 inch 90 degree X2 HF unit. All screen options are available for the DF65-50: The Match System / Digital Prints.
Distortion Reduced Motor Rigid Cast Steel Basket Crossover:
Operating Range: Beamwidth HF: FR: LF: HF: Connections: Dimensions: Weight:
45 Hz to 40 KHz 90 degree X2 SPL 1 Watt 93dB Max SPL 106 dB SPL avg 4 ohm continuous power handling 120 W Max SPL 106 dB SPL avg 4 ohm continuous power handling 120 W Max SPL Switch setting (0) 108 dB, setting (1) 114 dB avg 4 ohm continuous power handling 100 W Gold plated push terminals, single amp 650 H x 500 W x 97 D mm 14 kg each
Linear Phase 6 and 12 dB per octave
Applications 2-channel stereo max SPL 1m 106dB max SPL 4m 102dB Home Cinema, small - medium room, screening room max SPL 1m 106dB max SPL 4m 102dB Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 106 dBmax SPL 4m 102dB
DF75-55 X2 Full Range Studio Monitor Loudspeaker Cabinet colour
Screen options
Black White RAL
Match System
M
Back
275
Side
DF75-55 Technical highlights
Input sub
550
Dual Ring Radiator diaphragm
Copper caps for better HF extension and lower distortion Wave-guide center plug, copper-clad aluwire
Bottom 109.5
Woofer: 133
82.5
40
Tweeter:
Highly linear suspension and Low loss surrounds for high clarity and clean transient response
Top
670
750
750
375
104
DF75-55 Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Input top
Extra long excursion and Aluminum Short Circuiting Ring
DF75-55 X2
4-layer voice coil, anodized aluminum for improved heat dissipation.
2.5-way Full Range Studio Monitor. 2 x 10 inch LF and MF units, 2 x 1.5 inch 90 degree X2 HF unit. All screen options are available for the DF75-55: The Match System / Digital Prints.
Distortion Reduced Motor Rigid Cast Aluminum Basket Crossover: Linear Phase 6 and 12 dB per octave
Operating Range: Beamwidth HF: FR: LF: HF: Connections: Dimensions: Weight:
30 Hz to 40 KHz 90 degree X2 SPL 1 Watt 95dB Max SPL 114 dB SPL avg 4 ohm continuous power handling 220 W Max SPL 114 dB SPL avg 4 ohm continuous power handling 220 W Max SPL Switch setting (0) 112 dB, setting (1) 116 dB avg 4 ohm continuous power handling 100 W Gold plated push terminals, Bi-amp 750 H x 550 W x 133 D mm 18 kg each
Applications 2-channel stereo max SPL 1m 114dB max SPL 4m 106dB Home Cinema, medium room, screening room max SPL 1m 114dB max SPL 4m 106dB Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 114dB max SPL 4m 106dB
DF100-75 X2 Full Range Studio Monitor Loudspeaker Cabinet colour
Screen options
Black White RAL
Match Digital System Print
M
Front
40 133
Top Bottom
Input top
Bottom
Dual Ring Radiator diaphragm
Copper caps for better HF extension and lower distortion Wave-guide center plug, copper-clad aluwire
Extra long excursion and Aluminum Short Circuiting Ring
160
217 40
Tweeter:
Woofer:
Top Sub
Input sub
750
DF100-75 Technical highlights
Highly linear suspension and Low loss surrounds for high clarity and clean transient response
920
Tweeter Setting, (0) flat, (1) +4dB<5kHz
217
104
104
375
Di
DF100-75 Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Side
Back
35
1000
Tweeter Setting, (0) flat, (1) +4dB<5kHz
104
40
Front
35
Di Digital Print
160
4-layer voice coil, anodized aluminum for improved heat dissipation. Distortion Reduced Motor
DF100-75 X2
Rigid Cast Steel Basket
2.5-way Full Range Studio Monitor. 2 x 10 inch LF and MF units, 2 x 1.5 inch X2 HF unit. All screen options are available for the DF100-75: The Match System / Digital Prints.
Crossover:
Operating Range: Beamwidth: FR: LF: HF: Connections: Dimensions: Weight:
25 Hz to 40 KHz HF, 90 degree X2 SPL 1 Watt 95dB Max SPL 114 dB SPL avg 4 ohm continuous power handling 220 W Max SPL 114 dB SPL avg 4 ohm continuous power handling 220 W Max SPL Switch setting (0) 114 dB, setting (1) 116 dB avg 4 ohm continuous power handling 100 W Gold plated push terminals, bi-amp 1000 H x 750 W x 133 D mm 35 kg each
Linear Phase 6 and 12 dB per octave
Applications 2-channel stereo max SPL 1m 114dB max SPL 4m 106dB Home Cinema, medium room, screening room max. SPL 1 m 114 dB max SPL 4 m 106dB Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 114dB max SPL 4m 106dB
DFF120-43 X2 Full Range Studio Monitor Loudspeaker Cabinet colour
Screen options
Black White RAL
Match Digital System Print
M
430
Side 95
201
Tweeter Setting, (0) flat, (1) +4dB<5kHz 1200
DFF120-43 Technical highlights DFF120-43 Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
144
120
40
Back
Front 35
Di
Tweeter: Dual Ring Radiator diaphragm Highly linear suspension and Low loss surrounds for high clarity and clean transient response
1160
1232
Copper caps for better HF extension and lower distortion Wave-guide center plug, copper-clad aluwire Top
32
40
440
100 41 106 103
350
121
161
Top Sub
Woofer: Extra long excursion and Aluminum Short Circuiting Ring 4-layer voice coil, anodized aluminum for improved heat dissipation.
127
Distortion Reduced Motor
DFF120-43 X2
Rigid Cast Steel Basket
2.5-way Full Range Studio Monitor. 2 x 10 inch LF and MF unit, 2 x 1.5 inch 90 degree X2 HF unit. All screen options are available for the DFF120-43: The Match System / Digital Prints.
Crossover:
Operating Range: Beamwidth: FR: LF: HF: Connections: Dimensions: Weight:
25 Hz to 40 KHz HF, 90 degree X2 SPL 1 Watt 95dB Max SPL 116 dB SPL avg 4 ohm continuous power handling 220 W Max SPL 114 dB SPL avg 4 ohm continuous power handling 220 W Max SPL Switch setting (0) 116 dB, setting (1) 116 dB avg 4 ohm continuous power handling 100 W Gold plated push terminals, bi-amp 1200 (1232 with base plate) H x 430 W x 147 D mm 35 kg each
Linear Phase 6 and 12 dB per octave
Applications 2-channel stereo max SPL 1m 114dB max SPL 4m 106dB Home Cinema, medium room, screening room max SPL 1m 114dB max SPL 4m 106dB Restaurant - Bar - fixed installation - boardroom, auditorium max. SPL 1 m 114dB max SPL 4 m 106 dB
DFF180-43 X2 Full Range Studio Monitor Loudspeaker Cabinet colour
Screen options
Black
Match Digital System Print
M White RAL
Front
DFF180-43 Technical highlights
Side
Back
35 430
215
DFF180-43 Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
104
Tweeter Setting, (0) flat, (1) +4dB<5kHz
Di
Tweeter: Dual Ring Radiator diaphragm
Copper caps for better HF extension and lower distortion
1800
1702
1832
Highly linear suspension and Low loss surrounds for high clarity and clean transient response
Wave-guide center plug, copper-clad aluwire Woofer:
440
40
12
Extra long excursion and Aluminum Short Circuiting Ring 100 106 103
148
32
350
Top Sub
41
Top
215
4-layer voice coil, anodized aluminum for improved heat dissipation. Distortion Reduced Motor
DFF180-43 X2
Rigid Cast Steel Basket
2.5-way Full Range Studio Monitor. 3 x 10 inch LF and 1 x 10 inch MF unit, 2 x 1.5 inch 90 degree X2 HF unit. All screen options are available for the DFF120-43: The Match System / Digital Prints.
Crossover:
Operating Range: Beamwidth: FR: LF: HF:
Applications
Connections: Dimensions: Weight:
30 Hz to 40 KHz HF, 90 degree X2 SPL 1 Watt 95dB Max SPL 114 dB SPL avg 4 ohm continuous power handling 220 W Max SPL 116 dB SPL avg 8 ohm continuous power handling 220 W Max SPL Switch setting (0) 114 dB, setting (1) 116 dB avg 4 ohm continuous power handling 100 W Gold plated push terminals, bi-amp 1800 (1832 with base plate) H x 430 W x 147 D mm 50 kg each
Linear Phase 6 and 12 dB per octave
2-channel max SPL 1m 116dB max SPL 4m 108 dB Home Cinema, medium - large room, screening room max SPL 1m 116dB max SPL 4m 108dB Suitable
Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 116dB max SPL 4m 108dB
DFF180-43 PRO Full Range Studio Monitor Loudspeaker Cabinet colour
Screen options
Black White RAL
Match Digital System Print
M Front
DFF180-43PRO Technical highlights
Side
Back
35 430
178
215
Tweeter Setting, (0) flat, (1) +6dB<5kHz
104
DFF180-43 PRO Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
90 x 60 degree constant directivity compression horn
1800
1702
1832
Woofer: Extra long excursion and Aluminum Short Circuiting Ring 4-layer voice coil, anodized aluminum for improved heat dissipation. Distortion Reduced Motor
Sub
127.5
Rigid Cast Alu and Steel Basket
41
350
Top
148
32
Tweeter:
High SPL over long distance
Top Mid
440
Di
12
Crossover:
150
Linear Phase 6 and 12 dB per octave
DFF180-43 PRO 2.5-way Full Range Studio Monitor. 2 x 10 inch LF and 2 x 10 inch MF unit, 1 x 1.5 inch 90 x 60 degree constant directivity compression horn. All screen options are available for the DFF180-43 PRO: The Match System / Digital Prints. Operating Range: Beamwidth HF: FR: LF: HF: Connections: Dimensions: Weight:
15 Hz to 18KHz 90 x 60 degree constant directivity compression horn SPL 1 Watt 99dB Max SPL 122 dB SPL avg 4 ohm continuous power handling 250 W Max SPL 122 dB SPL avg 8 ohm continuous power handling 500 W Max SPL Switch setting (0) 120dB, setting (1) 124 dB avg 8 ohm continuous power handling 100 W Gold plated push terminals, bi-amp 1800 (1832 with base plate) H x 430 W x 178 D mm 50 kg each
Applications 2-channel stereo max SPL 1m 122dB max SPL 4m 112dB Commercial Cinema, medium - large room, screening room max SPL 1m 122dB max SPL 4m 112dB Restaurant - Bar - fixed installation - auditorium max SPL 1m 122dB max SPL 4m 112dB
DFC150-36 X2 Full Range 60 inch Centre Channel / Multi Purpose Loudspeaker Cabinet colour
Screen options
Black
Match Digital System Print
M White RAL
Di DFC150-36 Technical highlights
Front 35
1500
360
Tweeter Setting, (0) flat, (1) +4dB<5kHz
DFC150-36 X2 Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Tweeter: Dual Ring Radiator diaphragm Highly linear suspension and Low loss surrounds for high clarity and clean transient response
Side
Copper caps for better HF extension and lower distortion
133
92
1420
Wave-guide center plug, copper-clad aluwire
750 200
Back
Woofer:
200
180
123
144
Bi-wire terminal
Top Top Sub Sub
Extra long excursion and Aluminum Short Circuiting Ring 4-layer voice coil, anodized aluminum for improved heat dissipation. Distortion Reduced Motor
Full Range 60 inch Centre Channel / Multi Purpose Loudspeaker
Rigid Cast Steel Basket
2.5-way Full Range Studio Monitor. 4 x 10 inch LF and MF unit, 2 x 1.5 inch 90 degree X2 HF unit. All screen options are available for the DFC150-36: The Match System / Digital Prints.
Crossover:
Operating Range: Beamwidth: FR: LF: HF:
Applications
Connections: Dimensions: Weight:
35 Hz to 40 KHz HF, 90 degree X2 SPL 1 Watt 95dB Max SPL 114 dB SPL avg 4 ohm continuous power handling 220 W Max SPL 116 dB SPL avg 8 ohm continuous power handling 220 W Max SPL Switch setting (0) 114 dB, setting (1) 116 dB avg 4 ohm continuous power handling 100 W Gold plated push terminals, bi-amp 1500 H x 360 W x 133 D mm 30 kg each
Linear Phase 6 and 12 dB per octave
2-channel stereo max SPL 1m 116dB max SPL 4m 108 dB Home Cinema, medium - large room, screening room max SPL 1m 116dB max SPL 4m 108dB Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 116dB max SPL 4m 108dB
DF-Multi X2 42 inch Left / Centre / Right, Dedicated Centre Loudspeaker Screen options
Cabinet colour
M Match System
Black White RAL
74
Top
150
DF-Multi 42 inch Technical highlights
Front
Tweeter Setting
Tweeter Setting, (0) flat, (1) +4dB<5kHz
DF-Multi Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Dual Ring Radiator diaphragm Highly linear suspension and Low loss surrounds for high clarity and clean transient response
Tweeter Setting
Copper caps for better HF extension and lower distortion Bottom
74
Tweeter:
Wave-guide center plug, copper-clad aluwire
1030
Side
257
775
Woofer:
257
40
74
150
Aluminum Short Circuiting Ring Back Terminal Right speaker
4-layer voice coil, anodized aluminum for improved heat dissipation.
Terminal Left speaker
Terminal Centre channel
138
408
60
Distortion Reduced Motor
DF-Multi X2
Rigid Cast Steel Basket
Operating Range: Beamwidth HF: FR: FR: LF: LF: HF: HF:
70 Hz to 40 KHz 90 degrees X2 L & R SPL 1 Watt 89 dB Max SPL 104 dB avg 6 ohm continuous power handling 110 W Centre SPL 1 Watt 95 dB Max SPL 114 dB avg 8 ohm continuous power handling 220 W L & R Max SPL 89 dB avg 6 ohm continuous power handling 110 W Centre Max SPL 110 dB avg 8 ohm continuous power handling 220 W L & R Max SPL Switch setting (0) 106 dB, setting (1) 110 dB avg 4 ohm Centre Max SPL Switch setting (0) 110 dB, setting (1) 114 dB avg 4 ohm continuous power handling 100 W
Centre channel, all units in parallel:
SPL 1 Watt 98dB Max SPL 114 dB avg 4 ohm continuous power handling 110 W
Connections: Dimensions: Weight:
Gold plated push terminals, single / bi and tri amp, L,C,R. 1030 H x 150 W x 74 D mm 12 kg each
Crossover: Linear Phase 6 and 12 dB per octave
Applications 2-channel stereo max SPL 1m 105dB max. SPL 4m 97dB Home Cinema, small - medium room max SPL 1m 105dB max SPL 4m 97dB (Centre Channel) Home Cinema, medium - large room , screening room max SPL 1m 114dB max SPL 4m 106dB
DF-Multi X2 50 inch 50 inch version Left / Centre / Right, Dedicated Centre Loudspeaker Screen options
Cabinet colour
M Match System
Black White RAL
74
Top
150
DF-Multi 50 inch Technical highlights
Front
Tweeter Setting
Tweeter Setting, (0) flat, (1) +4dB<5kHz
DF-Multi 50 inch X2 Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Tweeter: Dual Ring Radiator diaphragm Highly linear suspension and Low loss surrounds for high clarity and clean transient response
Tweeter Setting
Copper caps for better HF extension and lower distortion 74
Bottom
Wave-guide center plug, copper-clad aluwire
1220
Side
255
Woofer:
255
150
45
74
Back Terminal Right speaker
Terminal Left speaker
Terminal Centre channel
530
62
142
Aluminum Short Circuiting Ring 4-layer voice coil, anodized aluminum for improved heat dissipation. Distortion Reduced Motor
DF-Multi X2 50 inch version
Rigid Cast Steel Basket
Operating Range: Beamwidth HF: FR: FR: LF: LF: HF: HF:
Crossover:
55 Hz to 40 KHz 90 degrees X2 L & R SPL 1 Watt 89 dB Max SPL 104 dB avg 6 ohm continuous power handling 110 W Centre SPL 1 Watt 95 dB Max SPL 114 dB avg 8 ohm continuous power handling 220 W L & R Max SPL 89 dB avg 6 ohm continuous power handling 110 W Centre Max SPL 110 dB avg 8 ohm continuous power handling 220 W L & R Max SPL Switch setting (0) 106 dB, setting (1) 110 dB avg 4 ohm Centre Max SPL Switch setting (0) 110 dB, setting (1) 114 dB avg 4 ohm continuous power handling 100 W
Centre channel, all units in parallel:
SPL 1 Watt 98dB Max SPL 114 dB avg 4 ohm continuous power handling 110 W
Connections: Dimensions: Weight:
Gold plated push terminals, single / bi and tri amp, L,C,R. 1220 H x 150 W x 74 D mm 15 kg each
Linear Phase 6 and 12 dB per octave
Applications 2-channel stereo max SPL 1m 105dB max. SPL 4m 97dB Home Cinema, small - medium room max SPL 1m 105dB max SPL 4m 97dB (Centre Channel) Home Cinema, medium - large room , screening room max SPL 1m 114dB max SPL 4m 106dB
DF-Multi X2 60 inch 60 inch version Left / Centre / Right, Dedicated Centre Loudspeaker Screen options
Cabinet colour
M Black
Match System
White RAL
DF-Multi 60 inch Technical highlights
200
DF-Multi 60 inch X2 Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Tweeter Setting, (0) flat, (1) +4dB<5kHz
Dual Ring Radiator diaphragm Highly linear suspension and Low loss surrounds for high clarity and clean transient response
Front
Tweeter Setting
Tweeter:
Tweeter Setting
Copper caps for better HF extension and lower distortion 74
Bottom
58
247
200
85
Wave-guide center plug, copper-clad aluwire
1500
Side
Woofer:
247
Extra long excursion and Aluminum Short Circuiting Ring
Back Terminal Right speaker
370
Terminal Left speaker
Terminal Centre channel
115
4-layer voice coil, anodized aluminum for improved heat dissipation.
370
Distortion Reduced Motor
DF-Multi X2 60 inch version Operating Range: Beamwidth HF: FR: FR: LF: LF: HF: HF: Centre channel, all units in parallel:
Rigid Cast Steel Basket
45 Hz to 40 KHz 90 degrees X2 L & R SPL 1 Watt 89 dB Max SPL 104 dB avg 6 ohm continuous power handling 110 W Centre SPL 1 Watt 93 dB Max SPL 108 dB avg 8 ohm continuous power handling 220 W L & R Max SPL 89 dB avg 6 ohm continuous power handling 110 W Centre Max SPL 108 dB avg 8 ohm continuous power handling 220 W L & R Max SPL Switch setting (0) 106 dB, setting (1) 110 dB avg 4 ohm Centre Max SPL Switch setting (0) 108 dB, setting (1) 110 dB avg 4 ohm continuous power handling 100 W SPL 1 Watt 96dB Max SPL 114 dB avg 4 ohm continuous power handling 110 W
Crossover: Linear Phase 6 and 12 dB per octave
Applications 2-channel stereo max SPL 1m 105dB max. SPL 4m 97dB Home Cinema, small - medium room max SPL 1m 105dB max SPL 4m 97dB
Connections: Dimensions: Weight:
Gold plated push terminals, single / bi and tri amp, L,C,R. 1500 H x 200 W x 85 D mm 20 kg each
(Centre Channel) Home Cinema, medium - large room , screening room max SPL 1m 114dB max SPL 4m 106dB
Sub Panel Micro Professional Subwoofer Cabinet colour
Black
White RAL Sub Panel Micro Technical highlights
Bottom
450 65
450
Sub Panel Micro Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
450
Sub Panel wall mount
Front
Side
Woofer: Extra long excursion and Aluminum Short Circuiting Ring 4-layer voice coil, anodized aluminum for improved heat dissipation.
186
Distortion Reduced Motor Rigid Cast Alu Basket
Terminals
Amplifier: Passive crossover (0) 120Hz. 6dB. octave (PA. cinema) (1) 60Hz. 18dB. octave (Hi-Fi)
300 watt into 8 ohm Extended protection circuit
Sub Panel Micro
Auto turn on, turn off - signal sensing
Professional Subwoofer. 1 x 10 inch inch LF units, sealed type cabinet.
Heat sensing fan speed 45Hz. Eq. 0dB. +3dB +6dB
Operating Range: Beamwidth: LF: Connections: Dimensions: Weight:
25 Hz to 120 Hz Omni-directional SPL 1 Watt 92dB Max SPL 108 dB avg 4 ohm continuous power handling 250 W Gold plated push terminals, single amp 450 H x 450 W x 186 D mm 10 kg each
For amplifier information, see PA-260 specifications
Subwoofer crossover, full range, 80Hz. and 120Hz. 18dB. per octave
Applications 2-channel stereo max SPL 1m 108dB max SPL 4m 97dB Home Cinema, small room, screening room max SPL 1m 108dB max SPL 4m 97dB Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 107dB max SPL 4m 97dB
Sub Panel Duo Professional Subwoofer Cabinet colour
Black White RAL Sub Panel Duo Technical highlights Bottom 500 65
Sub Panel Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
450
Terminals
Extra long excursion and Aluminum Short Circuiting Ring 4-layer voice coil, anodized aluminum for improved heat dissipation. Distortion Reduced Motor
Front
Side
Rigid Cast Alu Basket Amplifier:
186
800
Passive crossover (0) 120Hz. 6dB. octave (PA. cinema) (1) 60Hz. 18dB. octave (Hi-Fi)
Sub Panel wall mount
Woofer:
300 watt into 8 ohm Extended protection circuit Auto turn on, turn off - signal sensing
Sub Panel Duo
Heat sensing fan speed
Professional Subwoofer. 2 x 10 inch inch LF units, sealed type cabinet.
Operating Range: Beamwidth: LF: Connections: Dimensions: Weight:
20 Hz to 120 Hz Omni-directional SPL 1 Watt 95dB Max SPL 114 dB avg 4 ohm continuous power handling 250 W Gold plated push terminals, single amp 800 H x 500 W x 186 D mm 20 kg each
For amplifier information, see PA-260 specifications
45Hz. Eq. 0dB. +3dB +6dB Subwoofer crossover, full range, 80Hz. and 120Hz. 18dB. per octave
Applications 2-channel stereo max SPL 1m 114dB max SPL 4m 100dB Home Cinema, small - medium room, screening room max SPL 1m 114dB max SPL 4m 100dB Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 114dB max SPL 4m 104dB
Linax Subwoofer Cabinet colour
Black
White
RAL Linax Sub Technical highlights
Front 1060
Side 520
Woofer: Extra long excursion and Aluminum Short Circuiting Ring 4-layer voice coil, anodized aluminum for improved heat dissipation. Distortion Reduced Motor Rigid Cast Alu Basket
312
Passive crossover (0) 120Hz. 6dB. octave (PA. cinema) (1) 60Hz. 18dB. octave (Hi-Fi)
Back
Linax Subwoofer Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
400
Amplifier: 300 watt into 8 ohm Extended protection circuit Auto turn on, turn off - signal sensing
Linax Subwoofer
Heat sensing fan speed
Professional Subwoofer. 2 x 10 inch inch LF units, sealed type cabinet. 45Hz. Eq. 0dB. +3dB +6dB Operating Range: Beamwidth: LF: Connections: Dimensions: Weight:
20 Hz to 120 Hz Omni-directional SPL 1 Watt 96dB Max SPL 114 dB avg 4 ohm continuous power handling 250 W Gold plated push terminals, single amp 312 H x 1060 W x 520 D mm 30 kg each
Subwoofer crossover, full range, 80Hz. and 120Hz. 18dB. per octave
Applications 2-channel stereo max SPL 1m 114dB max SPL 4m 100dB
For amplifier information, see PA-260 specifications Home Cinema, small - medium room, screening room max SPL 1m 114dB max SPL 4m 100dB Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 114dB max SPL 4m 104dB
DFS120-43 Subwoofer Cabinet colour
Screen options
M Black
White Front
DFS120-43 Sub Technical highlights
Back
Side
215 120
DFS120-43 Subwoofer Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
1800
1232
178
200 145
430
Passive crossover (0) 120Hz. 6dB. octave (1) 60Hz. 18dB. octave
35
Di
Match Digital System Print
RAL
Woofer: Extra long excursion and Aluminum Short Circuiting Ring 4-layer voice coil, anodized aluminum for improved heat dissipation. Distortion Reduced Motor Rigid Cast Alu Basket
Top
Amplifier: 350 80
161
32
300 watt into 8 ohm
40
Extended protection circuit
120
Auto turn on, turn off - signal sensing Heat sensing fan speed
DFS120-43 Sub
45Hz. Eq. 0dB. +3dB +6dB
Professional Subwoofer. 2 x 10 inch inch LF units, sealed type cabinet. All screen options are available for the DFS180-43: The Match System / Digital Prints.
Operating Range: Beamwidth: LF: Connections: Dimensions: Weight:
20 Hz to 120 Hz Omni-directional SPL 1 Watt 95dB Max SPL 114 dB avg 4 ohm continuous power handling 250 W Gold plated push terminals, single amp 1200 (1232 with base plate) H x 430 W x 178 D mm 30 kg each
Subwoofer crossover, full range, 80Hz. and 120Hz. 18dB. per octave
Applications 2-channel stereo max SPL 1m 114dB max SPL 4m 100dB Home Cinema, small - medium room, screening room max SPL 1m 114dB max SPL 4m 100dB Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 114dB max SPL 4m 104dB
For amplifier information, see PA-260 specifications
DFS180-43 Subwoofer Cabinet colour
Screen options
M
35
White 430
DFS180-43 Subwoofer Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Back
1832
90
DFS180-43 Sub Technical highlights
Side
215
Front
Di
Match Digital System Print
RAL
Woofer: Extra long excursion and Aluminum Short Circuiting Ring 4-layer voice coil, anodized aluminum for improved heat dissipation. Distortion Reduced Motor
1800
Black
Passive crossover (0) 120Hz. 6dB. octave (1) 60Hz. 18dB. octave
Rigid Cast Alu Basket Amplifier: Top
40
350 178
80
300 watt into 8 ohm
120
DFS180-43 Professional Subwoofer. 4 x 10 inch LF units, sealed type cabinet. All screen options are available for the DFS180-43: The Match System / Digital Prints.
Extended protection circuit Auto turn on, turn off - signal sensing Heat sensing fan speed 45Hz. Eq. 0dB. +3dB +6dB Subwoofer crossover, full range, 80Hz. and 120Hz. 18dB. per octave
Operating Range: Beamwidth: LF: Connections: Dimensions: Weight:
15 Hz to 120 Hz Omni-directional SPL 1 Watt 99dB Max SPL 119 dB SPL avg 8 ohm continuous power handling 550 W Gold plated push terminals, single amp 1800 (1832 with base plate) H x 430 W x 178 D mm 55 kg each
Applications 2-channel stereo max SPL 1m 120dB max SPL 4m 104dB Home Cinema, medium - large room, screening room max SPL 1m 120dB max SPL 4m 104dB Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 120dB max SPL 4m 104dB
Spitfire Monitor Cabinet colour
Black Spitfire Monitor Technical highlights Front
Back 80
Tweeter:
Spitfire Sound System Monitor Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Dual Ring Radiator diaphragm Highly linear suspension and Low loss surrounds for high clarity and clean transient response
80
80
80
Tweeter Setting, (0) flat, (1) +4dB<5kHz
Copper caps for better HF extension and lower distortion
500
Top Sub
Top
Wave-guide center plug, copper-clad aluwire 150
202
Woofer: Extra long excursion and Aluminum Short Circuiting Ring 4-layer voice coil, anodized aluminum for improved heat dissipation.
500
Distortion Reduced Motor
Spitfire Monitor
Rigid Cast Steel Basket
2.5-way Full Range Professional Monitor. 2 x 10 inch LF and MF units, 2 x 1.5 inch 90 degree X2 HF unit. Operating Range: Beamwidth HF: FR: LF: HF: Connections: Dimensions: Weight:
30 Hz to 40 KHz 90 degree X2 SPL 1 Watt 95dB Max SPL 114 dB SPL avg 4 ohm continuous power handling 220 W Max SPL 114 dB SPL avg 4 ohm continuous power handling 220 W Max SPL Switch setting (0) 112 dB, setting (1) 116 dB avg 4 ohm continuous power handling 100 W Gold plated push terminals, Bi-amp 500 H x 500 W x 150 D mm 15 kg each
Crossover: Linear Phase 6 and 12 dB per octave
Applications 2-channel stereo / mid field / fullspace studio monitoring max SPL 1m 116dB max SPL 4m 106dB Home Cinema, small - medium room, screening room max SPL 1m 116dB max SPL 4m 106dB Suitable Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 116dB max SPL 4m 106dB
Spitfire Venue Cabinet colour
Screen options
Black
Match System
M
Di Digital Print
Spitfire Venue Technical highlights Front
Back
Side 160
Spitfire Venue Monitor Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
500
Woofer low cut 250Hz 6dB octave
90 x 60 degree constant directivity compression horn
Woofer:
Tweeter Setting, (0) flat, (1) +4dB<5kHz
Terminals
Tweeter:
High SPL over long distance
80
104
180
Extra long excursion and Aluminum Short Circuiting Ring Top
250
283
4-layer voice coil, anodized aluminum for improved heat dissipation. Distortion Reduced Motor
360
104
Rigid Cast Steel Basket Crossover: Linear Phase 6 and 12 dB per octave
Spitfire Venue 2-way Full Range Monitor. 1 x 10 inch LF and MF unit, 1 x 1 inch 90 x 60 constant directivity compression horn. Operating Range: Beamwidth HF: FR: LF: HF: Connections: Dimensions: Weight:
40 Hz to 18KHz 90 x 60 degree constant directivity compression horn SPL 1 Watt 97dB Max SPL 120 dB SPL avg 8 ohm continuous power handling 220 W Max SPL 116 dB SPL avg 8 ohm continuous power handling 220 W Max SPL Switch setting (0) 118 dB, setting (1) 120 dB avg 8 ohm continuous power handling 100 W Gold plated push terminals 500 H x 360 W x 160 D mm 10 kg each
Applications 2-channel stereo / home cinema max SPL 1m 120dB max SPL 4m 110dB Suitable Commercial Cinema, medium - large room, screening room max SPL 1m 120dB max SPL 4m 110dB
Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 120dB max SPL 4m 110dB
Spitfire 4-2-1 Cabinet colour
Black Spitfire 4-2-1 Technical highlights Side
800
186
Back 207
207
104
Front
Spitfire 4-2-1 Monitor Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Tweeter: 90 x 60 degree constant directivity compression horn High SPL over long distance Woofer:
840
Extra long excursion and Aluminum Short Circuiting Ring Top
4-layer voice coil, anodized aluminum for improved heat dissipation. Distortion Reduced Motor
120
Rigid Cast Steel Basket Tweeter Setting, (0) flat, (1) +6dB<5kHz
200
200
Crossover: Linear Phase 6 and 12 dB per octave
Spitfire 4-2-1 3-way Full Range Monitor. 4 x 10 inch LF units and 2 x 10 inch MF units, 1 x 1 inch 90 x 60 constant directivity compression horn. Operating Range: Beamwidth HF: FR: LF: HF: Connections: Dimensions: Weight:
20 Hz to 18KHz 90 x 60 degree constant directivity compression horn SPL 1 Watt 99dB Max SPL 122 dB SPL avg 4 ohm continuous power handling 250 W Max SPL 122 dB SPL avg 8 ohm continuous power handling 500 W Max SPL Switch setting (0) 120dB, setting (1) 124 dB avg 8 ohm continuous power handling 100 W Gold plated push terminals 840 H x 800 W x 186 D mm 45kg each
Applications 2-channel stereo / home cinema max SPL 1m 122dB max SPL 4m 112dB Commercial Cinema, medium - large room, screening room max SPL 1m 122dB max SPL 4m 112dB Restaurant - Bar - fixed installation - auditorium max SPL 1m 122dB max SPL 4m 112dB
Spitfire Subwoofer Cabinet colour
Black Spitfire Sub Technical highlights
Back
Front 250
Spitfire Subwoofer Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
Woofer: Extra long excursion and Aluminum Short Circuiting Ring 4-layer voice coil, anodized aluminum for improved heat dissipation. Distortion Reduced Motor Rigid Cast Alu Basket Amplifier: 300 watt into 8 ohm
160
840
Passive crossover (0) 120Hz. 6dB. octave (1) 60Hz. 18dB. octave
160
100
186
Terminals
Extended protection circuit 250
500
Auto turn on, turn off - signal sensing
Spitfire Subwoofer
Heat sensing fan speed 45Hz. Eq. 0dB. +3dB +6dB
Professional Subwoofer. 2 x 10 inch LF units, sealed type cabinet.
Operating Range: Beamwidth: LF: Connections: Dimensions: Weight:
20 Hz to 120 Hz Omni-directional SPL 1 Watt 97dB Max SPL 114 dB SPL avg 4 ohm continuous power handling 300 W Gold plated push terminals, single amp 840 H x 500W x 186 D mm 35 kg each
Subwoofer crossover, full range, 80Hz. and 120Hz. 18dB. per octave
Applications 2-channel stereo / mid field / fullspace studio monitoring max SPL 1m 114dB max SPL 4m 100dB Home Cinema, small - medium, screening room max SPL 1m 114dB max SPL 4m 100dB
For amplifier information, see PA-260 specifications Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 114dB max SPL 4m 104dB
SUPERSTAR Active Music Centre Cabinet colour
Screen options
M Black
Di
Match Digital System Print
Superstar Active Technical highlights
Side
Back 450
Front
Tweeter:
Superstar Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
104
25
Dual Ring Radiator diaphragm
650
Highly linear suspension and Low loss surrounds for high clarity and clean transient response Copper caps for better HF extension and lower distortion Wave-guide center plug, copper-clad aluwire
Top
Woofer:
Amplifier 500
130
25
Extra long excursion and Aluminum Short Circuiting Ring
SUPERSTAR
4-layer voice coil, anodized aluminum for improved heat dissipation.
3-way full range active music centre with built-in subwoofer. 2 x 5.5 inch LF-MF units, 2 x 1.5 inch 90 degree X2 HF unit, 1 x 10” subwoofer and a 2x150watt amplifier into 8ohm. All screen options are available for the SUPERSTAR: The Match System / Digital Prints.
Distortion Reduced Motor Rigid Cast Steel Basket Crossover: Linear Phase 6 and 12 dB per octave
Operating Range: Beamwidth HF: FR: LF: HF: Connections: Dimensions: Weight:
30 Hz to 40 KHz 90 degree X2 with Target lens 160 degree SPL 1 Watt 93dB Max SPL 106 dB SPL avg 4 ohm continuous power handling 120 W Max SPL 106 dB SPL avg 4 ohm continuous power handling 120 W Max SPL 106 dB. continuous power handling 100 W Active 650 H x 500 W x 130 D mm. 18 kg each
Applications 2-channel stereo max SPL 1m 106dB max SPL 4m 102dB Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 106 dBmax SPL 4m 102dB
For amplifier information, see PA-260 specifications
Source Options The SUPERSTAR comes with three shelf options to accommodate your chosen source. Mount the shelf which best suits your source using the screws supplied.
SUPERSTAR Accessories, source and fitting instructions
Shelf 1 Front or side mounting option. Ideal for small – medium digital source and docking station Shelf 2 Side mounting only. This pocket design is ideal for sources such as mobile phones without docking stations
Pos.2
Shelf 3 Side mounting only. Large shelf for larger sources
Pos.1
1.
Speaker cabinet
the SUPERSTAR is compatible with any digital source, including:
2.
3. We highly recommend the use of a purpose designed docking station no matter what the type or brand of MP3 player, or other source. Note that by using the mini jack straight out of the source, the audio output in some cases will be limited. In most cases this can be eliminated by using a docking station or a purpose made output connector, such as a multi pin connector to RCA.
SUPERSTAR Passive Stereo Speaker Cabinet colour
Screen options
M Black White RAL
Di
Match Digital System Print
Superstar Passive Technical highlights
Side
Back 450
Front
Superstar Loudspeaker Note: All dimensions are in mm. Artcoustic can not be held responsible for any wrong or missing dimensions.
104
25
Tweeter: Dual Ring Radiator diaphragm
650
Highly linear suspension and Low loss surrounds for high clarity and clean transient response Copper caps for better HF extension and lower distortion Right Left
103
Top
25
500
Woofer: 130
150
Wave-guide center plug, copper-clad aluwire
Extra long excursion and Aluminum Short Circuiting Ring
SUPERSTAR PASSIVE
4-layer voice coil, anodized aluminum for improved heat dissipation.
3-way full range passive music centre with built-in subwoofer. 2 x 5.5 inch LF-MF units, 2 x 1.5 inch 90 degree X2 HF unit, 1 x 10” subwoofer and a 2x150watt amplifier into 8ohm. All screen options are available for the SUPERSTAR: The Match System / Digital Prints.
Distortion Reduced Motor Rigid Cast Steel Basket Crossover: Linear Phase 6 and 12 dB per octave
Operating Range: Beamwidth HF: FR: LF: HF:
30 Hz to 40 KHz 90 degree X2 with Target lens 160 degree SPL 1 Watt 93dB Max SPL 106 dB SPL avg 4 ohm continuous power handling 120 W Max SPL 106 dB SPL avg 4 ohm continuous power handling 120 W Max SPL 106 dB. continuous power handling 100 W Gold plated push terminals 650 H x 500 W x 130 D mm. 13 kg each
Connections: Dimensions: Weight:
Applications 2-channel stereo max SPL 1m 106dB max SPL 4m 102dB Restaurant - Bar - fixed installation - boardroom, auditorium max SPL 1m 106 dBmax SPL 4m 102dB
Linax AV Storage Cabinet Cabinet colour
Black
White
RAL
Linax AV Storage Cabinet
Linax 4U+ Front view
Front Linax 4U+ Front view
Linax 4U+ Back Front view
Linax 4U+ Back Back Front view
Side
For remote use of equipment when the cabinet doors are closed, utilise the Artcoustic Octo fibre optic infrared repeater.
Dimensions external: H 312 W 1060 D 520 (mm) Dimensions internal: H 280 W 1028 D 507 (mm) Weight: 19 kg.
Linax 4U+ Front view
Front Linax 4U+ Front view
The Linax Duo is the perfect storage solution for your hi-fi or home cinema equipment. Clean Danish lines complement the most contemporary of interiors and practically, the open-back design allows airflow within the unit to keep the electronics cool. Perfectly proportioned, the Linax Duo offers stylish, versatile storage. Use combined with our Media Walls for a clean, contemporary solution.
Linax 4U+ Front view
The Linax AV-storage cabinet is delivered fully assembled. Top
Front Linax 4U+ Front view
Linax 4U+ Front view
Linax 4U+ Front view
Linax 4U+ Front view
Linax 4U+ Front view
175
Colour
275
350
Silver
1
Diablo Stands
2
The Diablo stands complement the entire Diablo range where wall mounting is not possible. The stand utilises a concealed wiring system, ensuring the aesthetic appeal of any installation. The Diablo Monitor and Diablo C-1 are easily mounted by a single metal insert placed on the rear panel of the speaker.
625
1
1. Diablo C-1 2. Diablo Monitor
Artcoustic Media Wall. An innovative new product from Artcoustic; the Media Wall makes it easy to create a beautiful installation in no time. The Artcoustic Media Wall is designed so that cables from your flat screen TV and loudspeakers are easily hidden, ensuring a perfect finish to your installation. The simplicity of the Artcoustic Media wall creates a clean foundation for your Artcoustic system in a few easy steps. By using the Artcoustic Linax Duo storage furniture, it is possible to completely integrate and hide the AV equipment in your installation. Two pieces of the Linax Duo fits the exact width of two Media Wall panels (212cm). The Media Wall pack comprises two wall panels and fixtures, and is available in our standard black and white finish.
36
1060
16
12
360
5
4
6
16mm MDF mounting plate
1060
990
Existing wall
360
1
2
3
Detail No. 1 side view
16
1
Screw the mounting plate onto the existing wall, this must be done with a very high horizontal precision +/_ 0.5mm
Detailed drawing of the Artcoustic Media Wall Plate. Finish, Semi gloss white
White
1
5
6
2
3
Existing wall
4
1060
Existing wall
1060
Linax Duo
2
Mount the media wall plates on the wall, simply by sliding the wall mount plate and the media wall plate together, see detail drawing No. 1
3
Linax 4U+ Front view
Linax 4U+ Front view
Linax 4U+ Front view
Linax 4U+ Front view
Linax 4U+ Front view
Linax 4U+ Front view
Measure the position speakers and screen brackets, drill holes for cables etc. Mount products onto the Artcoustic Media Wall
Artcoustic PA-260 Professional Multi Purpose Amplifier. Artcoustic has designed and engineered the PA-260 Professional Multi Purpose Amplifier. The PA-260 performs smoothly and accurately even in the most demanding conditions. The PA-260 is matched to all the Artcoustic loudspeakers’ impedance and tonality, making a perfect match with amazing detail, control and dynamics. The PA-260 offers incredible 2 channel performance in a rack mountable chassis just 2U high. This together with it’s high performance and silent running dual fan speed cooling system means it is suitable for almost any application, from recording studios to commercial bars & restaurants, high quality hi-fi and home cinema systems. It features 2 mono blocks with a total of 300 watt 8ohm bridged.
PA-260
-
L
+
+
+
Bridge
R
-
-
Output
Bridge mode output mainly used in conjunction with Artcoustic subwoofers and for high power requirements
-
L
+
+
+
Bridge
R
-
-
Output
Typical stereo connection for all purpose use, such as a stereo sound system or multi room speaker system (If switch is set to mono, the left and right channel will be combined and both channel will output identical signal)
Important! Always check for correct polarity on speaker wires Always turn off the amplifier before connecting speaker cables Always turn off the amplifier before using any of the filters, crossover, bass EQ. stereo, bridge and mono
b.
c.
a.
d. e.
f.
g.
PA-260 Power Amplifier Functions a. Master volume control b. Cooling fan setting 0 heat sensitive fan speed. Setting 1. constant fan speed c. Subwoofer crossover, full range, 80Hz. and 120Hz. cut high frequency cut 18dB per octave d. Stereo, mono and bridge mode setting (do not use bridge mode setting with Superstar) e. RCA unbalanced audio input, left and right channel
h.
f. Speaker output terminals, stereo and bridge mode g. Bang and Olufsen DIN input
i.
h. USB iPod battery charger i. EQ. @ 45Hz. flat, +3dB. +6dB bass boost j. Power on/off LED indicator k. On/off main switch (PA-260 are equipped with a automatic power on/off
j. k.
function, so no need to turn the amplifier off on main switch)
l. Main power fuse m. Main power input socket (Auto voltage selector 110V. to 230V.)
l.
m.
Artcoustic PA-260 2 channel amplifier (bridged mono block) features
Technical Specification
-Only 2 rack units high, means It has a very high output while occupying minimal rack space. -input sensitivity control. -Signal presence and protection indicator. -Unbalanced input via RCA connectors, DIN input (Bang & Olufsen) -USB charger (iPod) -Stable performance down to 4 ohms. -Auto turn on, turn off - signal sensing -Stereo, mono or bridge mode switch -45Hz. Eq. 0dB. +3dB +6dB -Subwoofer crossover, full range, 80Hz. and 120Hz. 18dB. per octave -High current bi-polar technology. -Dual monoblock amplifier PCB design, bridge mode. -Extended protection circuit. -High efficiency switching supply, multi voltage 110V. to 230V. -Heat sensing fan speed, setting 0 residential = silent, setting 1 commercial = constant fan speed -Totally protected against overheating and shorting and includes DC prevention at the output stage. 3 year guarantee.
Output power 20Hz-20KHz RMS program channel 4 ohm 180 WRMS 8 ohm 130 WRMS Output power 20Hz-20KHz RMS program bridged 8 ohm 300 WRMS Recommended impedance 8 ohm Input sensitivity RCA unbalanced 600mV/1kOhm DIN (Bang and Olufsen) 600mV/1kOhm S/N ratio channel 89dB Frequency response: 20Hz -20KHz THD <0.05% Damping factor @ 8 ohm > 600 Crosstalk > 45dB Slew rate 30V/ms. Power: 115V/230V ac 360VA Protection, heat, DC, short cut and soft start Dimensions (H x W x D) : 89 x 484 x 92mm Weight : 6Kg
Most importantly, the PA-260 has been designed and engineered to match the Artcoustic loudspeaker’s impedance and tonality, making them perfect partners.
Amplification when used with Artcoustic subwoofers: Panel Sub Micro Panel Sub Duo Linax Sub DFS120-43 Sub DFS180-43 Sub Spitfire Sub
Subwoofer LFE in Set to Bridge Crossover setting should be full range if used with an AV processor (with bass management), 80Hz or 120Hz if used in a stereo system (without bass management)
300watt into 8ohm Fan setting
Optional EQ.
Passive crossover (0) 120Hz. 6dB. octave (Cinema and P.A. Applications) (1) 60Hz. 18dB. octave (Hi-fi only) IMPORTANT: When used with PA-260 always use setting 0
Artcoustic PA-260 2 channel Amplifier in bridge mode
PA-260 amplification when used with Artcoustic loudspeakers: Stereo amplification, single amped Signal input
Set to Stereo
Bridged mono block amplification, Bi-amped Signal input
Set to Bridge
300watt into 8ohm Top-Mid 2 x 260watt into 4ohm
Stereo amplification, Bi-amped Signal input
Set to Stereo
Signal input Crossover setting should be full range if used with an AV processor (with bass management), 80Hz or 120Hz if used in a stereo system (without bass management)
Set to Bridge
130watt into 8ohm Top-Mid 300watt into 8ohm Sub 130watt into 8ohm Sub
PA-260 amplification rack mount shelf. Mount up to 4 PA-260 in a 3U rack space, total of 1200watt into 8 ohm 4 channels mono block configuration, or as a combination of stereo and bridged settings.
PA-260
PA-260
PA-260
132 (3U)
68
485
PA-260
440
465
Chromed front plate, mounted with magnets
Adjustable wall mount bracket
12
Speaker Bracket
124
55
25.69
WALL
Speaker
114
Wall Bracket
50 80
Fitting Instructions: Using screws and fixings suitable for your wall type (not supplied) mount the Wall Bracket to the desired height. Decide where the top of your speaker should be and measure down for the wall bracket position. Once the Wall Bracket is securely fixed hook the Speaker Bracket over the Wall Bracket. The curved edge of the Speaker Bracket allows for levelling adjustment – take the weight of the speaker and then carefully straighten the unit. Once straight release the unit and the bracket locks in to place.
Artcoustic Acoustic Absorbers Room correction the beautiful way. With the Artcoustic ABS ONE, ABS TWO and ABS THREE, it is now possible to correct rooms with acoustic problems in a simple, efficient and visually attractive way. The ABS absorbers are easy to mount flat on walls or ceiling surfaces, eliminating acoustic problems, such as room reverberation and slap echoes. The ABS absorbers are designed as a layered construction of highly dense materials giving a maximum absorption coefficient from relatively small surfaces. Only a few ABS absorption panels will make a vast improvement in an acoustically reverberant room. All images from the Artcoustic Art Portfolio and Match System colours are available on the ABS absorber range, creating freedom to design and integrate around existing room decoration and architecture. Applications 357 mm
26 mm
Conference and teleconference rooms, Lecture halls, Public spaces, Listening rooms, Recording and broadcast studios, Post production studios, Home theatres, Rehearsal rooms. Auditoriums, Performance spaces
357 mm
1727 mm
677 mm
0.26 0.32 0.85 0.95 0.95 0.95 0.90
ABS ONE
1127 mm
125Hz. 250Hz. 500Hz. 1kHz. 2kHz. 4kHz. 6kHz.
927 mm
Absorbtion Coefficient
ABS TWO
ABS THREE
OCTO IR Repeater Kit The Artcoustic OCTO IR repeater is ideal for controlling up to 8 units of A/V devices. The Artcoustic OCTO IR repeater kit is compatible with all standard IR remote control handsets and is plasma friendly
ARTCOUSTIC UK Showroom (by appointment only) 15 ECKERSLEY ROAD CHELMSFORD ESSEX CM1 1SL UNITED KINGDOM TEL:
+44 (0) 1245 400904
FAX:
+44 (0) 1245 400910
@:
[email protected] www.artcoustic.com
HEADQUARTER HOLMENS KANAL 7 1060 COPENHAGEN K DENMARK TEL:
+45 3283 6060
FAX:
+45 3283 6064
@:
[email protected] www.artcoustic.com
