Transcript
Thank you for purchasing the TEXET Bluetooth Headset, BTHSET-1, before use please read these instructions carefully and keep them in a safe place for future reference.
Bluetooth Stereo Headset BTHSET-1 Instruction Manual
Instructions for Use: Switching On/Off Headset:
List of Features: Pairing the Headset with Bluetooth Device: Paring Mode Be sure BTHSET-1 in power off status. Press and hold the MFB for 6 seconds, until Red and Blue LED blink alternately, or you hear the indication toneDo Do Dotwice . Release the MFB. The unit will become pairing mode. Headset Arm
Before use, please read the following Instructions carefully, and keep for future reference.
Pairing the Headset with Bluetooth Mobile Phone
Charging the Battery: Insert the USB cable into the USB port of your PC/Laptop. Connect cable to the Micro USB port of the Headset. When the Blue light is on the Headset is charging. When the Blue light is off the Headset is fully charge. It takes approx. 3 hours to fully charge the Headset.
Please Note – Before using, please fully charge the Headset.
Using the Headset
Listening to Music on your Headset
The Headset can be extended to fits various sized heads, as per the below diagram. Please wear the Headset as indicated by the “L” and“R” logos found on the sides of the Headset, “L” for the left ear and “R” for the right ear.
Once your Headset is connected to your Bluetooth device, you can listen to Music, if your device supports A2DP Bluetooth profile, (please refer to the Instructions of your Bluetooth device for this information).
LED Indicator In Use Status
Re-connecting to a Bluetooth Device Automatic Connecting
Manual Connecting to last connected Device
Please Note: To use the remote control functions of the last song/next song, (2 and 3 in the list of features on Page 2), your Bluetooth device needs to support AVRCP Bluetooth profile.
LED Indicator Charging Status
Please Note:
The BTHSET-1 stereo headset with Bluetooth Technology supports the following Bluetooth profiles: HSP – Headset Profile HFP – Hands free Profile A2DP – Advanced Audio Distribution ProfileAVRCP – Audio/Video Remote Control Profile. RECYCLING STATEMENT Waste electrical products/batteries should not be disposed of with household waste. Separate disposal facilities exist, for your nearest facilities see www.recycle-more.co.uk or in store for details. Visit our Website at www.texet.com to see our full range of products.
Made in China.
