Transcript
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF L-COM, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF L-COM, INC. IS PROHIBITED.
DESCRIPTION BODY PIN INSULATION SHELL FERRULE PF FERRULE STUD GROUND RING RETAINING RING GASKET NUT
MATERIAL BRASS BRASS PTFE BRASS BRASS BRASS BRASS BRASS SILICONE RUBBER BRASS
REVISIONS REV C
FINISH NICKEL GOLD NICKEL NICKEL NICKEL NICKEL NICKEL ORANGE NICKEL
DESCRIPTION
DATE
ECN 4601: REVISE CRIMPING DIMENSIONS, NEW FORMAT
3/10/10
APPROVAL D.FRISIELLO
.70 17.7 .40 10.2 .08 2.0
RECOMMENDED CABLE STRIPPING DIMENSIONS
1.50 38.10
.69 17.50 SQ.
.79 20.00
5/8-24 UNEF-2B
.256 6.50
FERRULE CRIMP SIZE
NOTES: ELECTRICAL: IMPEDANCE: 50 OHMS FREQUENCY RANGE: DC - 11 GHz WITHSTAND VOLTAGE: 1500V DIELECTRIC WITHSTANDING VOLTAGE: 2500V RMS CABLE RETENTION: 50 POUNDS-PULL MISCELLANEOUS: COMPONENTS SHALL BE INDIVIDUALLY PACKAGED IN ACCORDANCE WITH L-COM SPECIFICATIONS PS-0031. ALL DIMENSIONS ARE FOR REFERENCE ONLY.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES [mm] OVERALL CABLE LENGTH TOLERANCE: ≤12 [305] = +1 [25] / - 0 >12 [305] - 60 [1524] = +2 [51] / -0 >60 [1524] - 120 [3048] = +4 [102] / -0 >120[3048] - 300[7620] = +6 [152] / -0 >300[7620] = +5% / -0% ALL OTHER DIMENSIONAL TOLERANCES: .X = .2 .XX = .02 .XXX = .005 PROJECTION
RoHS Compliant D APPROVALS DRAWN BY
K.BURGNER
DATE
45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
11/26/07
CHECKED BY
K.BURGNER APPROVED BY
K.BURGNER
11/26/07
CATEGORY
COAXIAL
11/26/07
CONFIGURATION DETAILS OF UNDIMENSIONED FEATURES MAY VARY COLOR VARIATIONS MAY OCCUR
PRODUCT DESCRIPTION
N-MALE CRIMP RIGHT ANGLE CONNECTOR 240 SERIES CABLE SIZE
A
FSCM NO.
43321
DWG. NO.
SCALE: NONE CAD FILE:
ANM-1516
ANM-1516.SLDDRW
REV.
C
SHEET 1 OF 1
