Transcript
8
6
7
4
5
3
2
1
REVISIONS
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF L-COM, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF L-COM, INC. IS PROHIBITED.
A
DATE
DESCRIPTION
REV
APPROVED
9/7/10
INITIAL RELEASE
D.GRIFFIN
D
D
BUSHING
C
DESCRIPTION
MATERIAL
FINISH
BODY
BRASS
NICKEL
CONTACT
PHOSPHOR BRONZE
GOLD
INSULATOR
PTFE
N/A
FASTENING NUT
BRASS
NICKEL
COUPLING NUT
BRASS
NICKEL
GASKET
MVQ
N/A
BUSHING
PHOSPHOR BRONZE
NICKEL
WASHERS 1 & 2
BRASS
NICKEL
5/8-24UNEF-2B
C
1.02 25.9 .73 18.5
B
NOTE 1.21 30.8
1. REFERENCE DOCUMENT IP-0110 FOR CABLE ASSEMBLY INSTRUCTIONS. 2. CONNECTOR SHALL BE INDIVIDUALLY PACKAGED IN ACCORDANCE WITH L-COM SPECIFICATION PS-0031.
.630 (HEX) 16.00
1.79 45.5
3. ELECTRICAL VOLTAGE RATING: 1500 VOLTS PEAK IMPEDANCE: 50Ω FREQUENCY RANGE: DC~6GHz DIELECTRIC WITHSTANDING VOLTAGE: 2500 Vrms INSERTION LOSS: .20 dB MAX.
A
FASTENING NUT
WASHER1 (THIN) GASKET
.669 17.0
N-TYPE MALE
1.38 35.2
B
WASHER2 (THICK)
RoHS Compliant UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES [mm] OVERALL CABLE LENGTH TOLERANCE: ≤12 [305] = +1 [25] / -0 >12 [305] ≤60 [1524] = +2 [51] / -0 >60 [1524] ≤120 [3048] = +4 [102] / -0 >120 [3048] ≤300 [7620] = +6 [152] / -0 >300 [7620] = +5% / -0%
4. MECHANICAL MATING TORQUE: 15 INCH POUNDS (170 N.cm) MAX. CABLE ATTACHMENT: CLAMP CENTER CONDUCTOR ATTACHMENT: CRIMP OR SOLDER CABLE RETENTION: 30 LBS. PULL
ALL OTHER DIMENSIONAL TOLERANCES: .X = ± .2 .XX = ± .02 .XXX = ±.005 PROJECTION
APPROVALS
45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
DATE
DRAWN BY
09/02/2010
D. PARHAM CHECKED BY
09/03/2010
J. RUST
COAXIAL
09/03/2010
K. BURGNER
CONFIGURATION DETAILS OF UNDIMENSIONED FEATURES MAY VARY COLOR VARIATIONS MAY OCCUR
PRODUCT DESCRIPTION
CON, N-MALE CLAMP R/A LMR400 SIZE
A
FSCM NO.
43321
SCALE: NONE
8
7
6
5
4
3
A
CATEGORY
APPROVED BY
DWG. NO.
CAD FILE:
2
REV.
A
ANM-2402
ANM-2402.SLDDRW
SHEET 1 OF 1
1
