Transcript
120L Backpack systems MANUAL
Introduction This backpack system is the result of 20 years of continuous development. It is a backpack especially designed for military use. It is not a civilian backpack that has been adapted for military use. Military use means loads up to 60 kg and the possibility to attach military equipment on the backpack and an interface that works with ballistic vests etc. But it is a modern military backpack, with comfort and an ergonomic design.
Comfort
The backpack has a very stable carrying system with extra thick aluminium stays combined with a plastic board to make the whole back rigid. It is shaped to follow the curve of your back, making the whole back carry the backpack, reducing the strain on your shoulders and hips. The carry cushions and hip belt are made of foam and a plastic sheet to be stable yet soft. The have holes for the best possible ventilation. The hip belt carries the backpack in a single centred position. This makes it possible for your legs to move without interference from the hip belt.
Flexibility
The system can be used in many different ways, so you, as a soldier shall be able to optimise it for your needs. You can use the system with or without side pockets and flap. The flap and side pockets can be used separately as backpacks or bags or attached to the combat vest. Our specialist backpacks or mission backpacks can easily be attached on the back of the main pack. You can attach different bags, pouches, AT-4 or other equipment on the outside of the backpack.
SNIGELDESIGN
120L Backpacks * MANUAL
The complete system
The backpack system -12 is designed to work perfectly with our Ballistic plate carrier “Strap-on”. The shoulder straps from the backpack goes on the side of the Strap-on and the hip belt sits below the bottom of the Strap-on. The picture shows the 120L Backpack carried on a complete ballistic kit, including yoke, sleeves and groin protection.
SNIGELDESIGN
120L Backpacks * MANUAL
The complete system
This should be the normal set up for a soldier that carriers the backpack for over 5 km. The set up includes the Strap-on. The carrier pocket on the back, can be removed to make it more comfortable when the backpack is carried.
SNIGELDESIGN
120L Backpacks * MANUAL
The 120L backpack
SYSTEM includes -12
We put together the most popular accessories and the 120L backpack -12 in one package to make it easier to order. This is the Swedsh army´s M7085-058110, RYGGSÄCK 12 2. The difference between -12 and -13 is that -13 has a sleeping bag opening and inisde compartments in the lid.
29-00640-09-900 Quantity: 1 Grey only.
29-00640-09-000
120L Backpack system -12, Grey
Materials: 100% Nylon -PU coated, Polyester and Nylon webbing and binding, Polyethylene foam and sheets.
26-00422-09-000 Side pocket pair -12
Dimensions: Weight:
Quantity: 1
These are all complete with the accessories you see here below and to the right.
26-00425-09-000 120L Backpack liner -12 Quantity: 1 Grey only.
SNIGELDESIGN
Grey only.
26-00428-09-000 Duffel strap set -12
26-00429-09-000 Dual adjust strap -12
26-00424-09-000 Shoulder strap set -12
Quantity: 4
Quantity: 1
Quantity: 1
Grey only.
Grey only.
Grey only.
120L Backpacks * MANUAL
The 120L backpack
SYSTEM includes -13
We put together the most popular accessories and the 120L backpack -13 in one package to make it easier to order.
29-00824-00-900 Quantity: 1 Black, Grey, Multicam or Olive
29-00824-01-000 29-00824-09-000 29-00824-17-000 29-00824-56-000
120L 120L 120L 120L
Backpack Backpack Backpack Backpack
system system system system
-13, -13, -13, -13,
Black Grey Olive Multicam
Materials: 100% Nylon -PU coated, Polyester and Nylon webbing and binding, Polyethylene foam and sheets. Dimensions: Weight:
26-00422-00-000 Side pocket pair -12 Quantity: 1 Black, Grey, Multicam or Olive
These are all complete with the accessories you see here below and to the right.
26-00425-09-000 120L Backpack liner -12 Quantity: 1 Grey only.
SNIGELDESIGN
26-00428-00-000 Duffel strap set -12
26-00429-00-000 Dual adjust strap -12
26-00424-00-000 Shoulder strap set -12
Quantity: 4
Quantity: 1
Quantity: 1
Black, Grey, Multicam or Olive
Black, Grey, Olive and Coyote
Black, Grey, Multicam or Olive
120L Backpacks * MANUAL
The 120L backpack
Ergonomically shaped back to be as comfortable as possible
SNIGELDESIGN
features
A flexible helmet holder on the top of the flap
*
Holder for a helmet, your poncho or similar
*
10L top of flap compartment with zip for a spare sweater, mines, a hydration system, your admin book or similar
*
3L Front of flap compartment with zip for flashlights, spare batteries, insect repellant etc.
*
Velcro patch for owner marking
*
Large, removable flap that can be adjusted in height, depending on how much you have in the main pack. 2 inside zipped compartments
*
Back up closure attachment
*
Elastic edge to keep dirt and snow out
*
Side release buckles
*
Hole band and webbing with MOLLE attachment possibilities for extra pouches and bags
*
Roll up ends on all straps
*
Hole bands for attachment of additional equipment
*
Lower side compartments in mesh for end of skies, drying sox or storing waste or a small water bottle.
Sleeping bag compartment in the bottom on some versions.
The flap can be used in many different ways.
120L Backpacks * MANUAL
The 120L backpack
Microphone holder on both shoulder straps
SNIGELDESIGN
features
Free floating hip belt that moves with your body, reducing the energy consumption.
*
Helmet holder
*
Rigid head hole and cut out in the flap so you can bend your head back when wearing the backpack
*
Handle
*
Easy to remove flap that can be used as a daypack. The flap height can be adjusted, depending on how much you have in the main pack
*
Top tension straps
*
Ventilated back cushion
*
Shoulder straps with plastic sheet and firm foam with holes for ventilation. This is the optimal solution with the plastic sheet distributing the pressure over the foam
*
Chest strap
*
Holder for group radio microphone
*
10L Side pocket with zip. 6 outside attachment points for a duffel strap. Covered eyelets in the bottom. Stores your rain gear, insulated jacket, ghillie jacket and personal kitchen as well as 24 hours food.
*
Hip belt with plastic sheet and firm foam with holes for ventilation. The hip belt is centre attached, making it free to move with your body
*
Side strap
*
Sledge attachment point
A head hole to make it easier to lift your head when you carry a large backpack
The flap can be raised if the backpack is really full.
120L Backpacks * MANUAL
The 120L sniper backpack
We put together the most popular accessories and the 120L backpack in one package to make it easier to order.
SYSTEM includes 29-00889-01-000 29-00889-09-000 29-00889-17-000 29-00889-56-000
120L 120L 120L 120L
Sniper Sniper Sniper Sniper
Backpack Backpack Backpack Backpack
-14, -14, -14, -14,
Black Grey Olive Multicam
Materials: 100% Nylon -PU coated, Polyester and Nylon webbing and binding, Polyethylene foam and sheets. Dimensions: Weight: These are all complete with the accessories you see here below and to the right.
26-00425-09-000 120L Backpack liner -12 Quantity: 1 Grey
SNIGELDESIGN
29-00889-00-900
26-00422-00-000 Side pocket pair -12
Quantity: 1
Quantity: 1
Black, Grey, Multicam or Olive
Black, Grey, Multicam or Olive
26-00428-00-000 Duffel strap set -12
26-00429-00-000 Dual adjust strap -12
26-00424-00-000 Shoulder strap set -12
Quantity: 4
Quantity: 1
Quantity: 1
Black, Grey, Multicam or Olive
Black, Grey, Olive and Coyote
Black, Grey, Multicam or Olive
120L Backpacks * MANUAL
The sniper rifle cover 40-00931-01-000 40-00931-09-000 40-00931-17-000 40-00931-56-000
Sniper Sniper Sniper Sniper
rifle rifle rifle rifle
cover cover cover cover
-14, -14, -14, -14,
Black Grey Olive Multicam
Materials: 100% Nylon -PU coated, Polyester and Nylon webbing and binding, Polyethylene foam and sheets. Dimensions: Weight:
The camouflage screen is pulled up while lying down.
SNIGELDESIGN
The cover opens up to become a shooting mat with all the inside compartments easily accessible.
*
Fits inside the 120L sniper backpack
*
Adjustable length to fit different rifles
*
Padded to protect the rifle
*
MOLLE bands and hole bands on the front
*
2 roll up straps that can be used to carry the rifle cover as a backpack.
*
Flat, smooth and stiff back to be easy to pull over broken ground
*
Compartment with a puller string in the bottom
*
Inside compartment for suppressor, ammunition, magazines and cleaning equipment as well as the integrated camouflage screen
*
Zipped closure
*
Fold out construction makes it possible to use it as a mattress when shooting
*
Holder for the leg stands for the rifle
The back is PE board covered, making the rifle cover a sledge, that is easy to pull when crawling in the terrain.
The camouflage screen covers the front.
120L Backpacks * MANUAL
The sniper carry system The sniper carry system is a combination of the 29-00889-00-000, 120L Sniper Backpack -14 and the 40-00931-00-000, Sniper rifle cover -14.
Put the rifle inside the sniper rifle cover with the zipper closed. Fold down the flap and close the side release buckles.
Put the sniper rifle cover into the backpack, through the opening for the sniper rifle cover. Push out the bottom pocket so the rifle cover can get down, into it.
Rifle inside the sniper rifle cover and that inside the 120L sniper backpack.
Sniper, crawling with the rifle cover towed behind.
SNIGELDESIGN
Fold over the top opening for the sniper rifle cover and close the buckles. The rifle is now stored fully protected form snow and dirt.
Sniper with the backpack and personal equipment.
Sniper in position, seen from the side.
Sniper in position, seen from the front.
120L Backpacks * MANUAL
Other parts that can be used in the System
29-00363-00-000 All-pack -12
29-00027-00-000 25L Specialist backpack -11
28-00271-00-000 MP bag medium -12
Black, Grey, Multicam or Olive
Black, Olive, Multicam or Grey
Grey
TBARS-10 T-bar set -10
IBAR-10 I-bar set -10
26-00426-00-000 120L Backpack cover -12
Black, Grey or Olive
Black, Grey or Olive
Swedish forest camo, Grey, Multicam, Coyote, White or Olive
SNIGELDESIGN
120L Backpacks * MANUAL
120L Backpack
One side pocket carried as a backpack, attached with I-bars and T-bars to the plate carrier.
The flap carried as a backpack, attached with I-bars and T-bars to the plate carrier.
One side pocket carried as a backpack, attached with I-bars and T-bars to the plate carrier. The flap carried as a but-pack.
The pack of the 120L backpack.
The pack of the 120L backpack with flap.
The pack of the 120L backpack with flap and side pockets.
SNIGELDESIGN
System variations
Two side pockets carried as a backpack, attached with I-bars and T-bars to the plate carrier.
The pack of the 120L backpack with flap and side pockets. One 15L All pack to the back of the backpack.
The flap carried as a backpack, attached with I-bars and T-bars to the plate carrier. One 15L All pack carried around the waist.
The pack of the 120L backpack with flap and side pockets. One 15L All pack to the back of the backpack. One 10L All pack carried around the waist.
120L Backpacks * MANUAL
How to
adjust the backpack
How to....
The goal The shoulder straps are evenly pressed against the body in their full length The head is free and can be bent back The top tension straps are angled down between 5 and 45 degrees.
Measure the back length Sit down on the floor and lean against a door post If your distance is shorter than 55 cm from floor to your shoulder top, you should have the short back pack.
The top tension straps and shoulder straps have the same tension on the left and right side
The backpack rests along the full length of the back The top of the hip belt is aligned with the top of the hip bone. About 70% of the weight of the backpack should be carrier on the hip belt. Fill the back pack and put on the Fill the backpack with 10-15 kg. Put on the hip belt and make sure it fits. If it is too long, select the shorter hip belt.
Position the hip-belt * Make sure the hip belt is placed so the top of it is aligned with the top of your hip bone. * 70-80% of the weight of the backpack shall be carried on the hip bone.
SNIGELDESIGN
Adjust the height of the backpack * Put on the backpack and make sure that the angle on the top tension straps are 5-45 degrees. * Make sure the shape of the backpack fits your back. If not, bend it.
Jump up and down a few times and make sure that the backpack still is comfortable and sits correctly on your back
Verify where the hip belt shall be attached Let your buddy measure the distance between the bottom of the hip belt and the bottom of the backpack, so you know where to attach it. Remove it all.
120L Backpacks * MANUAL
How to
adjust the backpack
Make sure the lower and upper straps for the hip belt are out.
Pull the lower hip belt strap (40 mm with loop Velcro) through the lower, middle buckle on the hip belt. Make sure you thread the webbing as indicated in the picture above.
The hip belt attached high, for a short back.
The hip belt attached low, for a long back.
Thread the upper hip belt strap through the upper, middle hip belt buckle.
Push the surplus webbing under the back cushion, make sure the hook and loop Velcro are connected on the strap.
It is important that the webbing is threaded correctly.
Push the surplus webbing back through the buckle again and behind the hip belt.
Thread the hip belt side straps through the buckles on the backpack. Make sure the fold in the strap faces out, after it has been threaded into the buckle.
SNIGELDESIGN
120L Backpacks * MANUAL
How to
adjust the backpack
Pull up the backpack and take it on. Close the hip belt and make sure the backpacks sits well.
Make sure the top tension straps have correct tension and are placed with 5 to 45 degree angle down.
Close and tighten the chest strap. Make sure that the shoulder straps are in contact with the body in their full length.
The full length of the backpack should fit the shape of the back. Make sure the hip belt is placed so the top of it is aligned with the top of your hip bone. If not, adjust so the hip belt comes down on the pack.
Jump up and down a few times and make sure that the backpack still is comfortable and sits correctly on your back.
The top tension strap and shoulder straps have the same tension on the left and right sides. The ends of the straps are aligned on the left and right side.
SNIGELDESIGN
Do not put much tension on the top tension straps as the shoulders straps will be pulled up.
READY
120L Backpacks * MANUAL
How to put on
the 120L Backpack
Grab both shoulder straps and pull them up, bringing the backpack along.
Push your right arm through the right shoulder strap.
Swing the backpack right, onto your back.
Push your left arm through the left shoulder strap.
Close the hip belt front buckle.
Lean forward and pull your shoulders up so the hip belt comes up on the hips. Pull forward on the tension Strap-on the hip belt so the hip belt sits firmly around your hip, in the top aligned with the top of the hip bone.
Pull down the adjustment straps on the shoulder straps. Make sure not to pull to much, as most of the weight should be on the hip belt..
Pull the top tension strap if needed. Make sure not to pull to tight. If the shoulder straps bend, forming a gap on the shoulders, release the top tension straps so the gap is removed.
Fold the surplus adjustment straps and place them under the elastic keepers.
SNIGELDESIGN
120L Backpacks * MANUAL
How to use
the 120L Backpack
The hip belt moves with your body. The picture shows how it looks when you take a step with your left foot.
The picture shows how it looks when you take a step with your right foot. This function saves energy.
Do not put so much tension on the side straps on the hip belt, it will reduce the function of the movability of the hip belt.
On the zipped openings, a backup closure for a string is placed.
The surplus strap from the flap strap shall be tucked into the elastic compartment on the back
On the top of the flap a helmet or a garment can be carried. It is easy to attach and to remove.
Attach additional backpacks on the back of the main pack with duffel straps.
On the outside of the main pack, additional bags can be attached with duffel straps, T-bars or I-bars.
The backpack is even designed to hold an anti tank weapon on the outside.
SNIGELDESIGN
120L Backpacks * MANUAL
How to use
the 120L Backpack
The microphone can be attached on the shoulder strap. Put the hook into the webbing and thread the elastic around the microphone.
Carry your mattress under the flap straps.
Remove the side pockets and flap and you get a very small and smooth backpack.
Sit on your backpack when you take a break. You can easily reach the top of flap compartment when you rest like that.
The side pockets, where you can store the things need during your break are also easy to reach when you sit on your backpack.
The bottom compartment is easy to reach. Open the zipper and you have your sleeping gear.
SNIGELDESIGN
120L Backpacks * MANUAL
How to
attach in the hole bands
Decide where you want the duffel straps to be attached. Find the corresponding hole in the band.
Turn the buckle so the small part goes through the hole in the band.
Push the buckle through the hole. Twist the buckle and make sure that the hole is covered by the buckle.
The duffel buckles placed on the inside of the side pocket to the left. The duffel buckles placed on the outside of the side pocket to the right.
The All-pack attached with two duffel straps sets.
The duffel strap can also be attached on the side pockets.
Two side pockets duffel buckled together.
SNIGELDESIGN
A 50L mission backpack attached in the bottom with duffel buckles to the 120L backpack.
120L Backpacks * MANUAL
How to
make a small pack
One side pocket with three duffel strap sets makes it a 15L day pack.
One side pocket attached with T-bars and I-bars in the equipment vest.
One side pocket carried as a single small pack.
One side pocket with a shoulder strap set and a dual adjust strap.
One side pocket carried as a single butt pack.
One side pocket with one shoulder strap and one duffel strap.
One side pocket carried diagonal, across the back.
Two side pockets, connected with the duffel buckles are equipped with a shoulder strap set and a pair of duffel straps.
Two side pockets carried as a 30L backpack.
SNIGELDESIGN
120L Backpacks * MANUAL
How to
use the flap
The side pockets can be attached on the 50L mission backpack, making into a 80L backpack.
A duffel strap set attached to the flap.
The flap with a shoulder strap set and a dual adjust strap.
The flap with a duffel strap set, carried as a butt pack.
The flap attached to the equipment vest with an I-bar set.
SNIGELDESIGN
Two side pockets and the flap carried together as a 45L backpack system.
120L Backpacks * MANUAL
