Transcript
Manual for inCarBite’s OE factory fit WiFi Dash Camera Package includes: Main unit 8G memory card Manual Cable Aux-in Cable (Optional) Main Features: Supports Video Resolution 1080 (differentiate ratio: 30 fps) Support Wi-Fi, operate by connecting this device Wide angle lens 170o 8G memory card Built-in Microphone Built-in Speaker Warning Read carefully before using this product to ensure safe driving and to avoid any damage caused by improper use of this product. inCarBite’s WiFi Dash Camera only applicable for installation in vehicle. Please do not operate this product or WiFi DVR’s APP while driving Avoid storage or using this product under exceptional temperature Avoid using this product under strong magnetic field or vibrational environment. We are not liable to any damage or accident caused by neglect or malfunction through simultaneous use of this product and using the unofficial connected equipment or cables. Ensure that you check if the car engine is off before installation. Product damage may occur. Be sure to read the manual to ensure the correct use of this product. Some functions may change without notice to the user due to quality improvement of the product. There may be some differences in function depending on the product’s firmware version. This product is an accessory for the protection of driving, in the event of an accident, all responsibility is borne by the driver. Please use the product appropriately. After starting the car engine and turning on the power button, the unit’s power will be on. You will hear an opening sound alert. Built-in Multifunction button (MFB) Right beneath MFB are two LED indicators, one in red and one in blue (A) LED status 1. Normal operation mode: Red LED stays on, Blue LED flashes slowly 2. Continuous recording mode: Red LED stays on, Blue LED flashes fast 3. Malfunction mode: Red LED flashes, Blue LED stays on (Remarks: Be sure to insert micro SD card into card slot, without SD card may cause record malfunction and event recordings cannot be saved)
(B) Multifunction button (MFB): Track deviate function is not applicable to WiFi DVR model. 1. Under normal operation, press MFB button once, track deviate function mode will be ON; simultaneously WiFi function will be OFF; 2. Under normal operation, press MFB button once again, track deviate function mode will be OFF; simultaneously WiFi function will be ON; 3. Under normal operation, press and hold MFB button for 5 seconds, the device power will be off; Remarks: if you want to switch on the device again when the device is power OFF, disconnect power supply of the car engine and restart the car engine. 4. How to switch on and off: Track deviate function (not applicable to WIFI DVR) “Driving Assistant System” - switch on track deviate alert Under normal operation of the WiFi DVR, continuous recording is available, Red LED stays on, Blue LED flashes, press MFB button once, track deviate function mode will be ON; simultaneously you will hear Voice message: track deviate function mode is now ON, Please stay alert and drive safely. Now WiFi function is OFF and internet cannot be connected. Setting - Track deviate function Before switching on Track deviate function, please park your car in the middle of double white lines on the road. The unit will automatically start recognize track deviate alert lines within 1 minute. (Remarks: there will be deviation as the distance between car and double white lines may differ depending on vehicle type and manufacturer. Under normal track deviate operation and the car is being driven properly on the road, no signal will be announced. If deviate motion or veering direction of the car are being detected by the device. 'Doo Doo' sound will then be generated to alert Driver to stay alert and drive safely. Installation guide for IOS: (1) Connect by scanning QR code on the left, it will go to download interface, touch download icon and install. OR (2) Open app store in IOS appliance, key in “DrivePro” and search, touch download icon and install.
Installation guide for Android: (1) Connect by scanning QR code on the left, it will go to download interface, touch download icon and install. OR (2) Open Google Play in Android appliance, key in “DrivePro” and search, touch download icon and install.
Setting for IOS/Android Auxiliary Drive Control System Applicable for IOS 1. Select “Menu”, then select “Wi-Fi” 2. “Wireless web….” For Model: WIFI DVR, please select “WIFI DVR” 3. Key in Wi-Fi password: “12345678” 4. Once Wi-Fi is connected, you will hear a sound alert. Reset/change SSID or password; please refer to “Setting for IOS/Android Auxiliary Drive Control System” for details. Applicable for Android 1. Select “Menu”, then select “Wi-Fi” 2. From “Wi-Fi” menu: For Model: WIFI DVR, please select “WIFI DVR” 3. Key in Wi-Fi password: “12345678” 4. Once Wi-Fi is connected, you will hear a sound alert. WiFi DVR – APP
Scan to download the APP (Applicable for iOS smartphone)
Scan to download the APP (Applicable for Android smartphone)
Right after 1st installation, ensure to connect settings with your mobile phone and synchronize time (please refer to “setting”) On WiFi DVR’s System – APP Menu, live view, record format, time, record status are displayed.
By touching the screen twice, the screen will be enlarged to full screen. Touching the screen twice will return back to opening screen mode that you can operate Browse & Setting menu.
Browse 1. By touching “browse” on the screen of the phone – APP menu, recording will then stopped automatically, once return to live view and video recording will be started again. 2. By touching “Video” to select normal record file list, Touch “Emergency” to select normal record file list, emergency file list. Video Playback To select saved video by touching icon from video file list
Once started the car engine, auto start video recording, the recognition length for each video is 3 minute (default setting). Once the car engine is off, auto save the video file and the device will then power off. Continuous recording While continuous recording, if SD card is full with no more space, the earliest saved video will be covered by latest saved video. Emergency recording Under emergency recording mode, the device will save record of 15 seconds before & 15 seconds after impact occurs. The saved file will be protected and will not be covered by new record.
1.
Select by touching info icon besides video miniature, Function Column will then display beyond “video miniature”.
2.
Download file by touching “download” icon from Function Column.
Applicable for IOS: Downloaded file will be saved in Photo folder Applicable for Android: Downloaded file will be saved in File folder
Delete Video 1. Select by touching info icon besides video miniature, Function Column will then display beyond “video miniature”. 2. Touch “delete” icon from “Function Column”. 3. Delete video file by touching “OK”. Saved video message 1. Select by touching message icon besides video miniature, “Function Column” will then display beyond “video miniature”. 2. Touch “saved video message” icon from Function Column: to check record time, size and length of saved video.
Setting Setting Menu: you can adjust video setting, for example: Resolution ratio, record time; and setting time, date and sensitivity of crash sensor 1. 2.
Adjust setting by touching icons on WiFi DVR – APP menu Warning: Video recording will stop and auto resume recording once returns to real time screen. Know more about sub-settings by touch corresponding items Setting - Video setting appliances – appliances setting
Resolution ratio Setting recording Resolution ratio and broadcast quality
Exposure value Increase or reduce exposure value of video
Video interval Set video recorded time period of 1-minute, 3-minute or 5-minute interval in folder
Time Display Setting Current time will be displayed when recording
Setting - Audio Voice recording: switch on/off microphone when recording
Continuous recording If SD card is full with no memory space, the earliest saved video will be covered by latest saved video.
Setting Appliance – Menu description
Setting - Speaker Adjust sound and voice volume for speaker
=
G- Sensor Adjust sensitivity of impact sensor
Wi-Fi Reset new web name (SSID) and password
Under tacit recognition, start the device by key in WPA2 password: “12345678” For differentiate from existing internet, suggest reset new web name instead of SSID and new password for this device. Remarks: Web name (SSID) should possess at least 1 character, at most 32 characters. WPA2 web key should possess at least 8 characters, at most 32 characters. All ASCII code could be used as characters. Download path (only applicable to Android appliances) For Android: revise file path saved Assistance Please refer to operation guide
Display Sleep Setting Select display timeout after recording initiate: Never 1 minute 3 minutes
Time Format Current Date/Time setting
Information Display version of the device, capacity and remaining space of memory card
Synchronize time with appliance Synchronize time of APP and device. Right after initiate installation, connect mobile with device for synchronizing settings.
Warm reminder: Repetitive writing and deleting by dash cam can cause damage to memory card and files. Accordingly, periodic formatting can prevent memory card of files from such damage. Formatting SD card once every 3 months at minimum is recommended.
Periodically check if the device is running smooth (Red LED stays on, Blue LED flashes) If the device is making abnormal noise, can be an indication of malfunction. Please seek professional advice from authorized dealer.
