Transcript
Manual for USB MARCHI Disk V1.1
Manual for USB MARCHI Disk V1.1
Copyright © 2003 EUDAR Technology Inc. All rights reserved!
Page 1 of 13
Manual for USB MARCHI Disk V1.1
Content About USB MARCHI Disk: ..........................................................................................3 1. Public only: ............................................................................................................3 2. ZIP+Security:.........................................................................................................3 3. FDD+Security:.......................................................................................................3 About USB Disk Tool for MARCHI Disk :...................................................................4 1. Login ......................................................................................................................5 2. Change password ...................................................................................................8 3. Lock Media ............................................................................................................9 4. Format As.............................................................................................................10 5. PC Locker ............................................................................................................12 6. About....................................................................................................................13
Page 2 of 13
Manual for USB MARCHI Disk V1.1
About USB MARCHI Disk: MARCHI Disk can control flash memory in three modes, public only, ZIP+Security and FDD+Security.
1. Public only: In this mode, it looks like a general mass storage device that controls full size of flash memory. USB Disk Tool will be saved in flash memory as default. The whole disk is rewriteable.
2. ZIP+Security ( Default ) : ZIP+Security means it partitions flash into two parts, one is ZIP partition and the other is security partition. ZIP partition contains USB Disk Tool that is write-protected. The security partition is protected by password and is a writeable partition.
3. FDD+Security: FDD+Security means it partitions flash into two parts, too. One is FDD (floppy disk-like disk) and the other is security partition. FDD is write-protected like ZIP. It contains USB Disk Tool as default.
Page 3 of 13
Manual for USB MARCHI Disk V1.1
About USB Disk Tool for MARCHI Disk: USB Disk Tool ( USNDISKT086.exe ) for MARCHI Disk can work on Win98 1st Edition, Win98Se, WinMe, Win2K and WinXP. When you launch USB Disk Tool (USNDISKT086.exe) for MARCHI Disk, you will get a dialog as Fig. 1.
Fig. 1 In this dialog, you can input your password to login Security partition. You can change your password and format flash disk, too. Of course that this dialog won’t be shown up if the flash disk is formatted as Public-only. Meanwhile, there will be an icon on the task bar. I will explain later the way to do “Login”, “Change Password” and “Format As.”
Fig. 2 When you move mouse on the icon the bubble help tells you it is
Fig. 3 And, if you click on it, the command menu shows you that it has functions like Login, Change Password, Lock Media, Format As, and PC Locker, etc.
Page 4 of 13
Manual for USB MARCHI Disk V1.1
Fig. 4
1. Login When you click “USNDISKT086-Icon\Login” you will get the dialog:
Page 5 of 13
Manual for USB MARCHI Disk V1.1
Fig. 5 (or you launch USNDISKT086.exe and get a different dialog, Fig. 1, that has login control too.) You can input your password with 4 characters at least and 12 at most. If you forget your password you can click “Forget?” to get hint about your password if you have it when you change your password. Then, you can click “Login” button. If the password is correct, flash disk will switch to the security partition. Otherwise, the error message shows:
Fig. 6
The login icon on the task bar looks like
that lights in green color.
There is one short-cut in the Security partition whenever you have logged in it. It looks like
Page 6 of 13
Manual for USB MARCHI Disk V1.1
Fig. 7
You can click it to log out Security partition and you can click “USNDISKT086-Icon\LogOut” too.
Page 7 of 13
Manual for USB MARCHI Disk V1.1
2. Change password When you click “USNDISKT086-Icon\Change Password” you will get the dialog:
Fig. 8 You have to input the correct password that disk current has (Your old password). And then you can input the new password (Your new password) and confirm it (Confirm password.) The password should be 4 characters at least and 12 at most. By the way, you can input your “Hint string” to notify you when you forget your password. Hint string should be no more than 32 characters.
Page 8 of 13
Manual for USB MARCHI Disk V1.1
3. Lock Media This is a software-lock function to protect your disk from being destroyed. Clicking “USNDISKT086-Icon\Lock Media” you will get the dialog likes
Fig. 9 If you input correct password, the whole disk will be protected. You can read the file in the disk but you can not write and erase them and you can not format it either. After disk is locked, the icon looks like (or when you have logged in Security partition) and the “Lock Media” command will be changed to “Unlock Media” that you can click it with correct password to unlock the disk.
Fig. 10
Page 9 of 13
Manual for USB MARCHI Disk V1.1
4. Format As If you want to format your disk, you can click “USNDISKT086-Icon\Format As…” Before formatting, you will be asked to input your password if the disk has Security partition.
Fig. 11 The “Format As” dialog is
Fig. 12 There are three options that you can choose, PUBLIC ONLY, ZIP+SECURITY and FDD+SECURITY. To format your disk ‘PUBLIC ONLY’ is when you want your disk can be freely used. In this mode, your disk can be used on Windows, Mac OS 9 & X and Linux, etc. Its ready state icon on the task bar is
To format ZIP+SECURITY and FDD+Security is when you want to have security function. ZIP means the first partition is just a removable mass-storage disk drive on your system and FDD means it will be a removable floppy drive like Fig. 13. (On Win98, it is still a ZIP drive.) Page 10 of 13
Manual for USB MARCHI Disk V1.1
Fig. 13 After resizing, because it is logged in automatically the ready icon on the task bar is
On Win98/Me, you can format ZIP and FDD as a bootable disk that can boot system into DOS mode if your system supports USB ZIP/FDD boots. You can check “Make a bootable disk” if it is enabled. NOTE: Whenever you resize disk, task bar icon will be changed to be transition state (
) and you have to wait it to be ready state before accessing it.
Page 11 of 13
Manual for USB MARCHI Disk V1.1
5. PC Locker When you launch USNDISKT086 without enabling PC_Locker, the menu command will be “Enable PC Locker”. If PC Locker is enabled, host system (OS) will be protected after you unplug the flash disk. The dialog to enable PC Locker is as follows and you should check “Enable Pc Locker” and select the locking time interval. For example, to lock system 1 hour after unplugging flash disk.
Fig. 15 The icon on the task bar will be changed to
(or
when you have logged in
Security partition) that has a yellow-key. Then you can unplug the flash disk, the system will show up the scrolling message that “System has been protected.” The way to unlock system is to plug in your flash disk again. If you want to disable PC Locker you can click “USNDISKT086-Icon\Disable PC Locker” and un-check the button “Enable Pc Locker.”
Fig. 16
Page 12 of 13
Manual for USB MARCHI Disk V1.1
6. About
Fig. 17
Page 13 of 13
