Transcript
3G SDI 8x8 Matrix Switcher SW-SDI8X8
Content 1
INTRODUCTION………………….…………………………1
2
SPECIFICATION…………..……..…………………..……..2
3
PACKAGE CONTENT……….……………………………..3
4
PANEL DESCRIPTION………………….………….………3
5
CONNECTION AND OPERATION…………..……………4
6
WARRANTY...................................…………..…………...7
SW-SDI8X8
1. INTRODUCTION 1.1 Product Description The KanexPro 8x8 3G SDI Matrix with re-clock technology is an 8-input, 8-output switcher capable of routing high- resolution SMPTE and standard serial digital video signals. It supports input and output re-clocking up to 330 feet (100 meters) for optimum switching at full 1080p HD mode. The matrix switcher can be controlled using IR remote, front panel buttons or RS-232 interface.
1.2 Features ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Route high-resolution 8 SDI inputs to 8 SDI outputs I/O Re-clocking built-in Data rates up to 2.97 Gbps Supports multiple video resolutions: SDI 480i, 525i, 625i HD: 720p 24, 25,30,50 & 60 Hz. HD: 1080i 50 & 60 Hz. HD: 1080p 24, 25,30, 50 & 60 Hz. Memory function recalls last input after restart Supports multiple Color Space: RGB or YCbCr 4:4:4 sampling YCbCr: 4:2:2 or 4:2:0 sampling Supports 8 bit, 10 bit & 12 bit color depth Automatically switches between SD, HD and 3G-SDI standards Control by RS-232, IR, Front-panel LED buttons Rack mount ears included IR Remote control included Compatible with HDcctv 1.0, HD-SDI (ST-292), 3G-SDI (ST-424) and SD-SDI (ST-259)
Note: RG6 or RG59 cable is required for SDI transmission; we recommend a 75-ohm high quality coaxial cable. For supported distances at high resolutions over RG6, please check our Specs tab.
1
SW-SDI8X8
2. SPECIFICATION Signal Input/ Output Input Connector Output Connector
8×SDI BNC Male 8×SDI BNC Male
Support line length (Cable is RG6) 3G(1080P 60HZ) Mode
HD (720P 60HZ) Mode
SD (480i) Mode
Mechanical Size(L-W-H) Weight (Net) Warranty Limited Warranty Environmental Operating Temperature Operating Humidity Storage Temperature Storage Humidity Power Requirement External Power Supply Power consumption (Max) Electrical protection Power reverse polarity protection Power Overvoltage protection ESD protect
Input up to 328ft (100m)
•
Output: up to 295 feet (90m)
•
Input up to 722 feet (220m)
•
Output up to 590 feet (180m)
•
Input up to 1050 feet (320m)
•
Output up to 918 feet (280m)
13.79 x 6.0 x 1.80 inches 1 3.6 lbs. 1 Year 0 ℃ to +70℃ 10% to 85 % RH (no condensation) -10℃ to +80℃ 5% to 90 % RH (no condensation) 5V DC@ 3A 11W Max Yes Yes, but voltage must <28V Contact Discharge 8KV, Air Discharge 15KV
Regulatory Approvals Converter Unit Power Supply Accessories Adapter
FCC, CE CE, FCC
2
•
SW-SDI8X8
Note: Specifications are subject to change without notice.
3. PACKAGE CONTENT Before using this unit, please check the packaging and make sure the following items are contained in the shipping carton: l l l l l
1×Main unit 1×Power adapter 5V@3A 1×Remote-Control unit 1×Ext IR 1×User's Manual
4. PANEL DESCRIPTION
1) 2) 3) 4) 5)
Power in, DC 5V/3A adapter available; RS232 interface, connect to computer system; EXT IR; 8 SDI inputs, connect to SDI sources, such as SDI Camera; 8 SDI outputs connect to SDI monitors or other SDI Devices.
3
SW-SDI8X8
5 CONNECTIONS AND OPERATION 5.1 Connections and Operation (1) Connect the product to appropriate power; (2) Connect SDI signal sources to the SDI inputs “1” … “8” through high-quality 75Ω coaxial cable（RG59、RG6 cable or equivalent as well）; (3) Connect the SDI monitors or other SDI devices to the SDI outputs “A” … “H” through 75Ω coaxial cable; (4) Operate the SDI signal source to start the show;
5.2 FUNCTIONAL OPERATION To select the input source, or the Power On / Power Off, here are three operation ways: 1. Remote-Control Unit
1) To select the specified Input sources: press the serial number of the output channel + press the serial number of the Input channel that you want, for example: you want to choose Input 8 to be the output of the A channel, that is: A8 2) To select the next input source: press the button “△”corresponding to the output. 3) To close the output: when the channel is open, press the yellow button corresponding to the output channel. 4) To open the output: when the channel is closed, press the yellow button corresponding to the output channel. 2. The button, the Power Switch and input selection indicator on the front panel 4
SW-SDI8X8
The button ▼ ▲ on the front panel are used to select the input source, the Power switch on the right side is used to shutdown or start up. Digital tube on the front panel indicates which input the current output signal is derived from. 3. Connect the PC’s RS232 interface to the RS232 on the back of the main unit, user can select the input source, Power on and Power off by entering the command through the "super terminal" on the PC. The following is the RS232 control instruction sheet：
A Channel selects Input8 H Channel selects Input1
…
H1
…
…
A8
…
…
Shared control instruction QS Select the connection relationship between the source and sink PON Turn on the main power supply POFF Turn off the main power supply Select the input source: serial number of the output channel + serial number of the input channel + Enter A1 A Channel selects Input1
H Channel selects Input8 Close the output: OFF + serial number of the output channel + Enter OFFA Cut off the signal which was sent to output A, make output A not displayed …
…
H8
ONH
…
…
OFFH Cut the signal which was sent to output H, make output H not displayed Open the output: ON + serial number of the output channel + Enter ONA Open the signal which was sent to output A, let output A display Open the signal which was sent to output H, let output H display
Note: inputting need not case sensitive.
5
SW-SDI8X8
5.3 Connection Diagram
6
SW-SDI8X8
6 WARRANTY KanexPro TM warrants that (a) its products (the “Product”) will perform greatly in agreement with the accompanying written materials for a period of 12 months from the date of receipt (1 year) and (b) that the product will be free from defects in materials and workmanship under normal use and service for a period of 1 year. B. CUSTOMER REMEDIES KanexPro’s entire liability and Customer’s exclusive remedy shall be, at KanexPro option, either return of the price paid for the product, or repair or replacement of the Product that does not meet this Limited Warranty and which is returned to KanexPro with a copy of customers’ receipt. This Limited Warranty is void if failure of the Product has resulted from accident, abuse, or misapplication. Any replacement Product will be warranted for the remainder of the original warranty period of 1 year, whichever is longer. C. NO OTHER WARRANTIES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, KANEX DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO THE PRODUCT AND ANY RELATED WRITTEN MATERIALS. THIS LIMITED WARRANTY GIVES CUSTOMERS SPECIFIC LEGAL RIGHTS. CUSTOMERS MAY HAVE OTHER RIGHTS DEPENDING ON THE JURISDICTION. D. NO LIABILITY FOR DAMAGES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL KANEX BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS, BUSINESS INTERRRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT, EVEN IF KANEX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Brea, California KanexPro.com MPN: SW-SDI8X8
HDMI are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Kanex is a trademark of Apogee Inc., registered in the U.S.
7
