Transcript
UNISEX TALKING DIGITAL ALARM WATCH - BLACK TIM-143-325-3200 To Start the Watch: We ship watches in ‘Sleep’ mode. To start, press the top right button (2:00 position) for 5 to 10 seconds until you hear a small beep. This will activate the talking features on your watch. Please note: Once ‘Sleep’ mode has been deactivated, holding the top right button down for an extended period of time will reactivate ‘Sleep’ mode. If this occurs, please repeat the above instructions. Features: Support time broadcasting by voice Set alarm and oversleeping alarm (Snooze) Hourly report 12/24 hour system selection Display time, year, month, date Mode Settings: Press the ‘MODE’ button to go through the mode selections as follows: Time Display Mode Time Setting Mode Alarm Setting Mode Voice Broadcasting/Time Announcement: Press the ‘TALKING’ button to announce the corresponding contents by voice. Display the Time and Date: In ‘Time Display’, press ‘DATE/SET/HR/RPT’ to display the year. Press ‘DATE/SET/HR/RPT’ again to display the month and day. Press ‘DATE/SET/HR/RPT’ again to return to the normal time display. NOTE: if you do not press ‘DATE/SET/HR/RPT’ for 5 seconds, it will return to the time display automatically. Time Setting: In ‘Time Display’ mode, press the ‘MODE’ button once to enter the time setting mode. The ‘Hour’ will flash and ‘Time Set, Hour Set’ will be announced. Press the ‘ADJ’ button to adjust to the correct hour. Press the ‘DATE/SET/HR/RPT’ button the ‘Minutes’ will flash and ‘Minute Set’ will be announced.
Press ‘ADJ’ to adjust the minutes. Repeat step 2 to set the time format, year, month, and day. Hold the ‘ADJ’ button to quickly adjust the value during setting. Alarm Time Setting: In ‘Time Display’ mode, press the ‘MODE’ button twice to enter ‘Alarm Time Setting’. On the screen ‘AL SET’ will display and ‘Alarm set, hour set’ will be announced. The ‘Hour’ will flash. Press the ‘ADJ” button to adjust the hour. Press the ‘DATE/SET/HR/RPT’ button and the ‘Minutes’ will flash and ‘Minute Set’ will be announced. Press the ADJ button to adjust the minutes. If no button is pressed after 30 seconds, the screen will automatically return to ‘Time Display’ mode. Hold the ‘ADJ’ button to quickly adjust the value during setting. Turn On/Off the Alarm and the Snooze Functions: In ‘Time Display’ mode, to turn on the alarm, repeatedly press ‘ADJ’ until you hear ‘Alarm on’ and the announcement of the current alarm time. A bell symbol will appear on the screen. To turn on the snooze function, repeatedly press ‘ADJ’ until you hear ‘Snooze on’ and the announcement of the current alarm time. SNZ will appear on the display. To turn off the alarm, repeatedly press ‘ADJ’ until you hear ‘Alarm off’. At the preset alarm time, the alarm will sound for 60 seconds. To silence the alarm, press any button. The alarm will sound five times every five minutes if no button is pressed. Turning On/Off the Hourly Report: This watch supports all-day hourly reporting. In ‘Time Display’ mode hold down the ‘DATE/SET/HR/RPT’ button until you hear ‘Hourly Report on’ and a symbol with a dot surrounded by 3 semicircular lines appears on the screen. Hold down the ‘DATE/SET/HR/RPT’ until that symbol disappears. The watch will announce ‘Hourly report off.’ Replacing the Battery: This watch is powered by a CR2025 lithium battery. If the LCD becomes dark, sound becomes weak or functions are not responding, you should replace the battery. Remove the four screws on the cap with a screwdriver. Remove the old battery and insert a new one. Reinstall the cap and reinsert the four screws.
