Transcript
Another Quality Product from
www.creativenations.com Copyright 2007©•CNI-Creative Nations International
Jumpstart Manual Final Thursday, November 13, 2008 12:58:38 PM
INSTRUCTION MANUAL
CONGRATULATIONS on your purchase of the incredibly versatile Jump Start Juicer. The Jump Start Juicer quickly and efficiently extracts out the goodness, nourishment, essential minerals and vitamins you need!
It has been specifically designed to work in conjunction with the Jump Start Program, which contains over 100 great tasting natural juice recipes, created to give you immediate weight loss, boost your energy and increase your confidence.
We genuinely hope you enjoy using your Jump Start Juicer!
1.) Please verify the voltage of you Jump Start Juicer before connecting with any source of electricity. The voltage is clearly marked on the bottom of the appliance. 2.) Do not use outdoors. Your appliance is made solely for indoor use. 3.) Do not operate the appliance if cord or plug has been damaged. It must be replaced by the manufacturer or its service agent or a similarly qualified person to avoid any injury. 4.) Never leave the appliance within reach of children without supervision. The use of this appliance by young children or by disabled person must be supervised. 5.) Unplug the juicer before cleaning; transporting; and after use. 6.) Do not place the appliance, its power cable plug in water or in nearby liquids. 7.) Do not insert your finger or hand inside the feeder chute. 8.) Keep away from explosives and flammable fumes. 9.) Do not place near heat sources such as cooking stove. Operation failure may occur. 10.) Always place juicer on a dry flat surface. 11.) Do not touch the plug with wet hands. 12.) If appliance malfunctioned or has been damaged in any manner, return it immediately to the servicing agent for examination, repair and adjustments.
Built-in Safety Lock This appliance is equipped with built-in safety lock that prevents it from functioning if the accessories are not assembled correctly. Make sure to fasten the side of the clams securely.
Overheating Protection This appliance is made with an overheat protector. The unit will cease to operate if overheated. Allow to cool for 10 minutes before resuming operation.
Technical Parameters and Electrical Diagram Voltage: 220V~ Frequency: 50Hz Power:300W Rate continuous working period: 1 min
1
Jumpstart Manual Final Thursday, November 13, 2008 12:58:39 PM
2
Food Pusher Nano Sieve
Cover Mid Ring
Juice Blender
Cover
Juice Outlet
Clam
Main Body
Pulp Container
Switch Knob Base
Juice Extracting Filter
Grinding Cup (Chopping Cup) Grinding Blade (Chopping Blade)
1.) Mount the mid ring container on the motor house and ensure it is seated properly. 2.) Place the juice-extracting filter into the assembled container and press down slightly. 3.) Place the transparent cover and twist the clam counter clockwise. 4.) Place cup or container to collect the juice. Put the pulp container in place before inserting the fruits. 5.) When finished using the juice extractor, push the mouth of pulp container, and then take it out.
* 0 I II
6.) See diagram how to remove mid ring and juiceextracting filter.
Juice Extractor Switch
3
Jumpstart Manual Final Thursday, November 13, 2008 12:58:49 PM
4
1.) Lift the safety clips from underneath and pull outwards until the clips are facing down.
1.) Lift the safety clips from underneath and pull outwards until the clips are facing down.
2.) Lift off the feeder chute lid and remove the juicer-extracting and filter.
2.) Lift off the feeder chute lid and remove the juice-extracting filter.
3.) Insert the accessory connector, make sure the raised sections are outwards facing and are in line with the safety clips.
3.) Insert the accessory connector, make sure the raised sections are outwards facing and are in line with the safety clips.
4.) Lift the accessory clips and place them into the accessory connector until the grooves meet, once the clips are secure, push the clips down to lock the connector into place.
4.) Separate the grinder’s or chopper’s base from its cup by holding the base and turning the cup counter clockwise. Turn the base upside down and fill the cup with the desired contents, then re-assemble the grinder or chopper base by turning clockwise.
5.) Insert the blender into the accessory connector and twist counter clockwise until the grinder or chopper is secure. 6.) When using the blender, slice food into smaller pieces to prolong the life of its motor. If the blades are stuck, switch off the unit, and remove any obstructions. Be careful of the sharp blades. 7.) Safety Interlocking Switch: The unit will not work if the safety clips are not properly locked. 8.) Once you have finished blending, twist the blender clockwise and remove it from the accessory connector. 9.) If you have any type of food that needs sifting, place the Nano Sieve in the Blender Cup. Place the food in the Nano Sieve and lock the lid in place . Do not use the Nano Sieve to make smoothies or shakes. Cover Grinding Cup
5.) Insert the complete grinder or chopper into the accessory connector and twist counter clockwise until the grinder or chopper is secure. 6.) After grinding or chopping, twist the grinder or chopper clockwise and pull it away from the cup.
Clean and Care 1.) Wipe the base unit with a damp cloth, if necessary, use a little mild detergent. 2.) Do not immerse the base unit in water, do not allow liquid to get inside it. 3.) The other parts should be washed in hot soapy water. Rinse well and dry thoroughly before storing.
Chopping Cup
4.) The juice-extracting filter should be scrubbed inside out to remove all traces of pulp. Chopping Blade
5.) All removable parts are dishwasher safe except the main power unit. Should the pulp container be discolored by certain food (such as carrots), wipe gently with a little vegetable oil on a cloth and wash as usual. Switch Nano Sieve
5
Jumpstart Manual Final Thursday, November 13, 2008 12:58:52 PM
6.) Do not use harsh or abrasive cleaners. 6
