Transcript
Marine ECDIS & RADAR Monitor MON2300M
MON2300M is a rugged 23.1” (LCD) TFT monitor, specially designed for the demanding operating conditions at sea. MON2300M is tested for full compliance to IACS E10, IEC 60945, ECDIS and RADAR marine standards. MON2300M features a display with excellent brightness and contrast levels, that, together with wide viewing angles, ensure a good readability, thus making it very eye-friendly. MON2300M uses the ISIC dial and membranekey technology to give the monitor a low profile, for beautiful integration in any place.
23.1” LCD display - TFT technology. Excellent brightness and contrast levels. Direct dimming control (0-100%) from dial. Full settings control via menu or serial link. Scalable picture in picture (swappable). Anti-glare and impact resistant safety glass. IP65 and chemical resistant front. Integrated & programmable loudspeaker. High integrated electronics, and best components ensure top quality.
Product Specifications Display Type: Size: Viewing angles: Luminance: Contrast ratio: Colours: Resolution: Ports Video input:
Control input/output:
Power Supply: Consumption: Design Front: Window: Back: Connectors: Protection: Optional extras Power supply: Design front: Touch: Housing: Sun Visor:
Loudspeaker: Environment Operating temperature: Storage temperature: Relative humidity: Approvals Environment: Radio/navigation: EMC: Dimensions
MON2300M Mk.II LCD (TFT) active matrix 23.1 inch diagonal 80°/80°/80°/80° (L/R/T/B) 250 Cd/sqm 500:1 typical 16,194,277 (24 bit) 1600 x 1200 max. (physical), Auto scaling RGB/DVI-A:
Analogue 0.7 Vpp positive at 75Ω, separate sync or sync on green Horizontal sync: 15-100 kHz (automatic) Vertical sync: 30-100 Hz up to 1280x1024 30-60 Hz at 1600x1200 (DVI-A placed in connector with DVI-I) DVI-D/I: Single channel, 25-162 MHz pixel clock (DVI-I placed in connector with DVI-A) S-video: Y input 1 Vpp, C input 0.286 Vpp, 75Ω 2x Composite: 1 Vpp, 75Ω RS232 RS485 Touch
D-sub 9 pin, 19200 Kb 2x D-sub 9 pin for daisy chain, 19200 Kb D-sub 9 pin
90 – 265 VAC rms, 60/50 Hz ±5 Hz 60 W typical Solid aluminium, black coat Laminated anti-glare impact resistant safety glass EMC shield, anodised steel Placed in EMC shield facing down IP65 from front (panel mount) 18 – 36 VDC Customised design Capasitive Steel cabinet with tilt, black coat, IEC60945 tested, IP44 back Steel visor, black coat; IEC60945 tested Integrated & programmable loudspeaker. -15 – 55 °C -25 – 70 °C 10 – 80 % (non-condensing) IACS E10 IEC 60945 EN60945, EN55022, EN55024 IEC 61174 534 x 584 x 102 mm 21 Kg
ISIC A/S • EDWIN RAHRS VEJ 54, 8220 BRAB R AND • DENMAR K TEL. +45 7020 7077 • FAX: +45 7020 7076 • E-MAIL:
[email protected] • WWW.ISIC.DK
Technical specifications are subject to change without prior notice / 28-09-2005
Product
