Transcript
15”Marvel High Efficiency Single Zone Wine Cellar Model # ML15WS****
•D ynamic Cooling Technology™ delivers rapid cooldown and the industry’s best temperature stability •M ARVEL Intuit™ Integrated Controls provide precise temperature management from 40°F to 65°F •V ibration Neutralization System™ protects wine from agitation • Two-stage, soft white theatre-style LED lighting and midnight black interior • Thermal-efficient cabinet ensures optimum food preservation and energy efficiency while maximizing capacity • Tinted, UV-resistant dual pane glass door protects wine from damaging ultra-violet light • Natural maple shelf fronts are stainable to match cabinetry • Three-quarter extension roller-glide shelf system prevents jarring • Close Door Assist System™ gently and automatically closes door • Panel overlay option features soft-close integrated hinge for a truly flush fit with cabinetry • Audible and visual alarms signal when door is left ajar to protect wine integrity and energy use • Vacation/Sabbath mode conserves energy during times when the unit is not in use • Sleek stainless steel door and designer handle • Height adjustment up to 1” with leveling legs • Filler kit available for 18” wide opening, see page 58 • Up to 2x more efficient than leading competitors • 4” black adjustable toe kick •1 -year warranty
Ordering Details Stainless Frame Glass Door, Right Hinge
ML15WSG1RS
Stainless Frame Glass Door, Left Hinge
ML15WSG1LS
Smooth Black Frame Glass Door, Right Hinge
ML15WSG1RB
Smooth Black Frame Glass Door, Left Hinge
ML15WSG1LB
Panel Overlay Frame Glass Door, Integrated Right Hinge
ML15WSF2RP
Panel Overlay Frame Glass Door, Integrated Left Hinge
ML15WSF2LP
Solid Panel Overlay Ready Door, Integrated Right Hinge
ML15WSP2RP
Solid Panel Overlay Ready Door, Integrated Left Hinge
ML15WSP2LP
No panel installation kit required.
Storage Capacity Up to 24 bottles total
Storage Configuration (6) 4-bottle roller-glide wine racks
Product Dimensions 14⅞” W x 33¾” minimum H x 25⅝” D (including handle)
Finish/Door Options
Stainless Steel
Black
Wood Overlay (Panel Ready)
Forced Air Fan
"A"
Evaporator Plate Return Air Intake
"B"
Front
"C" 15" Rough-In Dimensions "A" PRODUCT DIMENSIONS 15" (38.1 cm)
"B"
"C"
**34" to 35" (86.4 to 88.9 cm)
24” (61 cm)
PRODUCT DATA MODEL ML15WSG
ELECTRICAL REQUIREMENTS #
PRODUCT WEIGHT
115V/60Hz/15A
105 lbs (47.7 kg) 105 lbs (47.7 kg)
ML15WS(P) or (F) Cabinet 115V/60Hz/15A Dimensions
"D" ML24W*G 14 7⁄8”
"E" 115V/60Hz/15A 33 3⁄4” to 34 3⁄4”
ML24W*(P) (60.7 cm)or (F) (85.7 115V/60Hz/15A to 88.3 cm)
Forced Air Fan Evaporator Plate
140 lbs "F"
(63.6 kg)
23 23⁄32” 140 lbs (60.2 cm) (63.6 kg)
“G”
“H”
“J”
25 21⁄32” (65.2 cm)
37 13⁄32” (95 cm)
16 11⁄16” (42.4 cm)
Return Air Intake "J"
Front
Side
"H" "D"
"G"
Dynamic Cooling Technology™ delivers rapid cool down and the industry’s best temperature stability
"E"
The distinctive Marvel design features a
1"thermal-efficient cabinet and door combined (2.5 cm)Dynamic Cooling Technology™ for with
Figure 8
211⁄2" (54.6cm)
superior temperature stability, faster cooling times and speedy temperature recovery even with high frequency.
"F" * Depth dimension of rough-in opening may vary depend- Control Type Width 14 ⅞" Intuit™ Finishes APPLIES TO THE FOLLOWING MARVEL MODELS ing on each individual installation. To recess entire door "F" Vacation / Interior Finish Black Temperature Range 40° - 65° F ML15WS ML24WS dimension plus 1" (2.5 cm) for thickness of power cord plug Sabbath Mode ML24WD Lock NA is required. Capacity Up to 24 wine bottles Electrical Requirements
** Minimum rough-in opening required is to be larger than Shelving System Side mount - tray Length of Power Cord the adjusted height of the cabinet. Shelf Fronts
Black painted maple
Product Dimensions
# A grounded 15 amp dedicated circuit is required. Follow Depth to Front of Door Other Storage all local building codes when installingNAelectrical and appliDepth to Handle ance. Interior Lighting 2 White LED Pods Toe Grill Finish
Black
Hinge Handle
Classic Hinge
!
Designer WARNING
120V / 60Hz / 15A 5'
CSA
ENERGY STAR Certified
NA
23 23/32" 26 ¼" 37 1/16"
Shipping Weight
125 lbs
Finishes Key
SS = Stainless Steel B = Black Floor mount Anti-tip Bracket must be installed for freestanding applications. Not required for built in applications.O = Overlay
9
Yes
Agency Approvals
14 ⅞" W x 33 ¾" H x 21 ½" D
Depth with door at 90°
SS, B, O
DOOR PANEL INSTALLATION Overlay Panels
OVERLAY DOOR PANEL INSTALLATION
Figure 13 Left Hand Hinged Door 15" (38.1 cm) wide appliance
y panel with top side of door.
Clearance for screw head, Weight of overlay door panel must not 4 places exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model. Figure 15 Right Hand Hinged Door 15" (38.1 cm) wide appliance
Clearance for hinge 2 places 143⁄4" (37.5 cm)
ay panel to ntered on of door.
1
⁄4" (6 mm) Deep
31⁄8" (7.9 cm)
1
13⁄4" (4.4 cm)
1 ⁄4" (4.4 cm) 3
233⁄4" (60.3 cm)
1" (25.4 mm) diameter counter bore 1⁄4" (6 mm) deep 4 places.
3 1 ⁄8 " (7.9 cm)
1 ⁄4" (6 mm) Deep
13⁄4" (4.4 cm)
14" (35.6 cm)
47⁄8" (12.4 cm)
13⁄16" (3 cm)
13⁄16" (3 cm) 3 ⁄32" (9.7 cm)
31⁄8" (7.9 cm)
327⁄32" (9.8 cm) 1
31⁄8" (7.9 cm) Minimum
16
(4.3 cm)
2" (5.1 cm)
CAUTION
#10 Wood Screw
Hardwood
1
Softwood
7
⁄8" (3.2 mm) Diameter. Pilot Hole
2" (5.1 cm)
311⁄16" (9.4 cm)
Step 4: Assemble the panel to the door
The preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 12a. Drill holes through the gasket DOOR PANEL INSTALLATION extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1 ⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5 ⁄8" (16 mm) thick shorter screws will have to be obtained. earance for Fasten the! panel to the door with the 10 screws provided rew head, in the literature pack. (See Figure 21). Remove the clamps places Weight of overlay doorinpanel must not exceed 15 and replace the gasket the gasket extrusion channels of pounds kg) force for a may solidbedoor model 10the pounds the door.(6.8 Some required to or seat gasket (4.5 a glassBe door intokg) the for channels. suremodel. the gasket corners are seated properly.
CAUTION
Hardwood
1
Softwood
7
⁄8" (3.2 mm) Diameter. Pilot Hole ⁄64 (2.8 mm) Diameter. Pilot Hole
Table C #10 x 1/2" screw
Step 4: Assemble the panel to the door
Figure 21 The preferred method of attaching the panel to the door
Clearance for screw head, 4 places
do
o5r
1 ⁄32" (2.9 cm)
1 ⁄2 " (3.8 cm) typical 1
111⁄16" (4.3 cm)
14" (35.6 cm)
3 ⁄8 " (7.9 cm) 1
Material Type
41⁄8" (10.5 cm) Minimum
47⁄8" (12.4 cm)
13⁄16" (3 cm)
Figure 11
327⁄32" (9.8 cm)
Overlay panel flush with top and side of door.
1 ⁄4" (6 mm) radius is permissible
31⁄8" (7.9 cm)
1
Softwood
7
8
1 1 ⁄2 " (3.8 cm) typical
Holes in gasket retainer.
Table C
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep 4 places
311⁄16" (9.4 cm)
31⁄8" (7.9 cm)
Overlay panel to be centered on 4 ⁄ "width of door. 8
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep 4 places
Figure 20 Right Hand Hinged Door 24" (61 cm) wide appliance
311⁄16" (9.4 cm)
The preferred method of attaching Figure 18the panel to the door is to clamp the panel to Hand the door so it cannot Left Hinged Door move while drilling the screw24" pilot(61 holes. clamps or "C" clamps cm) Use widebar appliance with pads on the clamping surfaces that will not mar the 16 panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width PANEL INSTALLATION of the door. See Figure 12a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1 ⁄2" (12.7 mm) deep. for If the overlay panel is thinner than Clearance 5 ⁄8" (16 mm)screw thick head, shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided 4 places in the literature pack. (See Figure 21). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket 13 Be sure the gasket corners are seated into theFigure channels. Left Hand Hinged Door properly. 15" (38.1 cm) wide appliance
(10.5 cm)
2" (5.1 cm)
2"
Step 4: Assemble the panel to the door
Clearance for hinge 2 places
#10 x 1/2" screw
15⁄32" (2.9 cm)
1
⁄8" (3.2 mm) Diameter. Pilot Hole ⁄64 (2.8 mm) Diameter. (5.1 cm) Pilot Hole
3011⁄32" (77.1 cm) This side facing interior
3011⁄32"
#10 Wood Screw
Hardwood 4⁄" 1
Press and hold down this tab on the wire connector and pull the connector apart.
13⁄4" (4.4 cm)
facing interior
(10.5 cm)
233⁄4" (60.3 cm)
⁄4" (6 mm) Deep
CAUTION
!
111⁄16" (4.3 cm)
OVERLAY DOOR
1
31⁄8" (7.9 cm)
cm) Weight of overlay door panel must not (77.1 exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds This door side model. (4.5 kg) for a glass
15⁄32" (2.9 cm)
Right Hand Hinged Door 24" (61 cm) wide appliance
Figure 12a #10 Wood Screw
3 1 ⁄8 " (7.9 cm)
31⁄8" (7.9 cm) Minimum
Figure 16 Right Hand Hinged Door 15" (38.1 Figure cm) wide 19 appliance
⁄64 (2.8 mm) Diameter. Pilot Hole
Table C
Material Type
of
This side facing interior
Figure 14 Left Hand Hinged Door anel to the ! 15" (38.1 cm) Wide Appliance learance for crew head, 15 Weight of overlay door panel must not exceed 15 places pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model. Material Type
To p
bottom
311⁄16" (9.4 cm)
1 ⁄ " PANEL INSTALLATION
l
Clearance
Hinge side of door
1 1 ⁄2 " (3.8 cm) typical
permissible
31⁄8"for hinge (7.9 cm) at top and Minimum
This side facing interior
4 1 ⁄8 " (10.5 cm) Minimum
11
30 ⁄32" (77.1 cm)
⁄4" (6 mm)
radius is OVERLAY DOOR PANEL INSTALLATION
⁄4" (6 mm) radius is permissible 1
11
Hinge side of door
3011⁄32" (77.1 cm)
31⁄8" (7.9 cm) Minimum 15⁄32" (2.9 cm)
15⁄32" (2.9 cm)
Clearance for hinge at top and bottom
27
⁄4" (6 mm) radius is permissible
31⁄8" (7.9 cm)
or
do
Figure 17 Left Hand Hinged Door 24" (61 cm) wide appliance
1
d 15 DOOR pounds
of
143⁄4" (37.5 cm)
⁄4" (6 mm) Deep
47⁄8" 5" (12.4 cm) (12.7 cm)
327⁄32" (9.7 cm)
sket ng at a p and pull e door.
p To
Clearance for hinge 2 places
1" (25.4 mm) diameter counter bore 1⁄4" (6.4mm) 5" 47⁄8" deep 4 places. (12.7 cm) (12.4 cm) 13⁄16" (3 cm)
Clearance for screw head, 4 places
CAUTION
!
Hinge side of door
To
Hinge side of door
rt.
or
do
Hinge side of door
f po
Clearance for screw head, 4 places
143⁄4" (37.5 cm)
1 ⁄16" (4.3 cm) 11
1
⁄4" (6 mm) Deep Figure
1" (25.4 mm) diameter counter bore 1⁄4" (6.4mm) 5" 47⁄8" deep 4 places. (12.7 cm) (12.4 cm)
1 1 ⁄2 " (3.8 cm) typical
13⁄16" (3 cm)
3 1 ⁄8 " (7.9 cm)
13⁄4" (4.4 cm)
327⁄32" (9.7 cm)
⁄ " (6 mm) For comprehensive installation instructions, 17 radius is please visit www.marvelrefrigeration.com permissible 1
Magnetic Gasket
4
3011⁄32" (77.1 cm)
21
