Transcript
24” Marvel Professional High-Efficiency Dual Zone Wine Cellar Model # MP24WD**** •D ynamic Cooling Technology™ delivers rapid cooldown and the industry’s best temperature stability • Soft-close integrated hinge provides seamless zero clearance installation and a smooth, gentle close •Professional styling: framed stainless steel door, sturdy full-length handle, sleek stainless shelf fronts and 4” adjustable stainless steel toe kick • MARVEL Intuit™ Integrated Controls provide precise temperature management from 45°F to 62°F, allowing you to specifically set each cabinet temperature to your preference • Two independently monitored zones to store your wine collection at separate temperatures • Two-stage, soft blue theatre-style LED lighting and sophisticated midnight black interior • Heavy-gauge wine racks are shaped to safely cradle each wine bottle • Full-extension ball bearing smooth-glide shelf system prevents jarring • Thermal-efficient cabinet ensures optimum preservation and energy efficiency while maximizing capacity • Tinted, UV-resistant dual pane glass door protects wine from damaging ultra-violet light •Audible and visual alarms signals when door is left ajar to protect wine integrity and energy use • Vacation/Sabbath mode conserves energy during times when the unit is not in use and complies with Star-K requirements
Storage Capacity
•Door lock to protect your collection • Height adjustment up to 1” with leveling legs • Up to 2x more efficient than leading competitors • 3-year warranty
Up to 40 bottles total
Storage Configuration Upper zone: (3) 8-bottle smooth-glide full wine racks Lower zone: (1) 8-bottle smooth-glide full wine rack and (2) 4-bottle smooth-glide half-depth wine racks
Product Dimensions 23 ⅞” W x 33¾” H (minimum) x 25⅝” D (including handle)
Finish/Door Options Ordering Details Stainless Frame, Glass Door With Lock, Integrated Right Hinge
MP24WDG4RS
Stainless Frame, Glass Door With Lock, Integrated Left Hinge
MP24WDG4LS
Panel Overlay Frame Ready Glass Door, Integrated Right Hinge With lock
MP24WDF4RP
Panel Overlay Frame Ready Glass Door, Integrated Left Hinge With lock
MP24WDF4LP
No panel installation kit required.
Stainless Steel
Wood Overlay (Panel Ready)
Forced Air Fan
"A"
Evaporator Plate
"B"
Return Air Intake Front
"C"
24" Rough-In Dimensions "A"
"B"
"C"
24”
**34" to 35"
24” (61 cm)
(61 cm) (86.4 to 88.9 cm) PRODUCT DIMENSIONS
Forced Air Fan
PRODUCT DATA MODEL MP15WSG
"D"
MP15WSF
23 7⁄8” (60.7 cm) MP24**G
ELECTRICAL REQUIREMENTS #
PRODUCT WEIGHT
115V/60Hz/15A
105 lbs (47.6 kg)
Cabinet Dimensions "E"
115V/60Hz/15A
33 3⁄4” to 34 3⁄4” (85.7 115V/60Hz/15A to 88.3 cm)
MP24**F
“G”
26 7⁄32” (66.6 cm)
105 lbs
(47.6 kg) 23 23⁄32” 140 lbs (60.2 cm)
Return Air Intake
(63.6 kg)
“H”
140 lbs (63.6 “J” kg)
46 13⁄32” (117.9 cm)
26 7⁄16” (67.2 cm)
115V/60Hz/15A
Evaporator Plate
"F"
"J"
Front
Side
"H" "D"
"G"
Dynamic Cooling Technology™ delivers rapid cool down and the industry’s best temperature stability
"E"
The distinctive Marvel design features a 1" (2.5 cm) thermal-efficient cabinet and door combined
with Dynamic Cooling Technology™ for superior temperature stability, faster cooling times and speedy temperature recovery even with high frequency.
211⁄2" (54.6 cm)
Figure 6 "F"
Width
23 ⅞"
Control Type
Interior Finish
Black
Temperature Range
Intuit™ 34° - 42° F
Finishes Vacation / Sabbath Mode
APPLIES TO THE FOLLOWING MARVEL MODELS Up to 20 wine bottles Lock Yes Capacity Up opening to 162 12-oz Agency Approvals * Depth dimension of rough-in maycans vary depend- Electrical Requirements MP15WS MP24WS 120V / 60Hz / 15A ing on each individual installation. ToMount recess entire door "F" Side MP24WD 5' Shelving System Energy Star Certified dimension plus 1" (2.5 cm) forBottle thickness power cord plugLength of Power Cord shape of wire is required. Product Dimensions 23⅞" W x 33¾" H x 21½" D Shelf Fronts
Stainless Steel
Depth to Front of Door ** Minimum Other Storagerough-in opening required is to be larger than Depth to Handle the adjusted height of the cabinet.
23 23/32"
Depth with door at 90°
46 /32"
Interior Lighting
2 LED Pods
Toe Grill Finish 15 amp dedicatedStainless # A grounded circuit Steel is required. Follow all local building codes when installing electrical and appliHinge Soft Close Integrated Hinge Shipping Weight ance. Handle
Professional
7
26 7/32" 13
160 lbs
Finishes Key SS = Stainless Steel O = Overlay
SS, O Yes CSA NA
OVERLAY DOOR PANEL INSTALLATION
DOOR PANEL INSTALLATION Overlay Panels
15 ged Door e appliance
To p
of
Clearance for screw head, 4 places po To
or
Weight of overlay door panel must not exceed 10 pounds (4.5 kg) for a glass door model. Hinge side of door Figure 15 Left Hand Hinged Door 24" (61 cm) wide appliance
Figure 17 Right Hand Hinged Door 24" (61 cm) wide appliance
13⁄4" (4.4 cm)
3 ⁄4" 4 cm)
3 1 ⁄8 " (7.9 cm)
233⁄4" (60.3 cm)
14" (35.6 cm)
47⁄8" (12.4 cm)
13⁄16" (3 cm) 327⁄32" (9.8 cm)
31⁄8" (7.9 cm)
15⁄32" (2.9 cm) 111⁄16" (4.3 cm)
4 ⁄8" (10.5 cm) 1
2" (5.1 cm) 311⁄16" (9.4 cm)
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep 4 places
1 ⁄16" (3 cm)
1 ⁄2" (3.8 cm) typical
111⁄16" (4.3 cm)
1 1 ⁄2 "
typical Hardwood
Softwood
3011⁄32" (77.1 cm)
This side facing interior
OVERLAY DOOR PANEL INSTALLATION 2" 2" (5.1 cm)
311⁄16" #10 Wood Screw 1" (2.5 cm) diameter (9.4 cm) x 1⁄4" (6 mm) deep 1 ⁄8" (3.2 mm) Diameter. Pilot 4 places
Hole Figure 16 ⁄64 (2.8 mm) Diameter. Pilot Hole Left Hand Hinged Door 24"C(61 cm) wide appliance Table
7
15 Step 4: Assemble the panel to the door
15⁄32" (2.9 cm) 111⁄16" (4.3 cm)
1
Material (3.8 cm) Type
3 1 ⁄8 " (7.9 cm)
This side facing interior
41⁄8" (10.5 cm)
Figure 18 Right Hand Hinged Door 24" (61 cm) wide appliance
oor iance
3011⁄32" (77.1 cm)
15⁄32" (2.9 cm)
47⁄8" (12.4 cm)
3
31⁄8" (7.9 cm)
3011⁄32" (77.1 cm)
This side facing interior
or
1 ⁄4" (6 mm) radius is permissible
31⁄8" (7.9 cm)
31⁄8" (7.9 cm)
do
327⁄32" (9.8 cm)
1 ⁄4" (6 mm) radius is permissible
3 1 ⁄8 " (7.9 cm)
2" (5.1 cm)
3 1 ⁄8 " (7.9 cm)
3 1 ⁄8 " (7.9 cm)
14" (35.6 cm)
327⁄32" (9.8 cm)
1 ⁄4" (6 mm) radius is permissible
of
233⁄4" (60.3 cm)
⁄4" (6 mm) Deep 1
13⁄4" (4.4 cm)
13⁄4" (4.4 cm)
14" (35.6 cm)
47⁄8" (12.4 cm)
13⁄16" (3 cm)
⁄4" (6 mm) Deep 1
To p
Clearance for screw head, 4 places
Figure 17 Right Hand Hinged Door 24" (61 cm) wide appliance
Clearance for hinge at top and bottom
233⁄4" (60.3 cm)
⁄4" (6 mm) Deep 1
1 ⁄4" (6 mm) Deep
3011⁄32" (77.1 cm)
r
Clearance for hinge at top and bottom
CAUTION
!
oo
fd
do
Hinge side of door
of overlay door panel ot exceed 10 pounds for a glass door model.
Clearance for screw head, 4 places
Hinge side of door
Clearance for hinge at top and bottom
CAUTION
(5.1 cm)
311⁄16" (9.4 cm)
41⁄8" (10.5 cm)
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep 4 places
Figure 18 Right Hand Hinged Door 24" (61 cm) wide appliance 1 15 #10 x ⁄2"
11⁄2" (3.8 cm) typical
Counter bore lock hole on back side.
screw
Hinge side of door
Figure 19a The preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be 31⁄2" 17 OVERLAY DOOR PANEL flush INSTALLATION with the top of the door and centered along the width ⁄32" OVERLAY DOOR PANEL INSTALLATION (89 mm) of the door. See Figure 10a. Drill holes through the gasket (13.7 mm) extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill Material Type #10 Wood Screw through the front surface of the panel, drill no deeper than Material Type #10 Wood Screw 1 1 ⁄INSTALLATION 2" (12.7 mm) deep. If the overlay panel is thinner than Hardwood ⁄8" (3.2 mm) Diameter. Pilot Hole OVERLAY DOOR PANEL 1 5 Hardwood ⁄87" (3.2 mm) Diameter. Pilot Hole ⁄8" (16 mm) thick shorter screws will have to be obtained. Counter bore Softwood ⁄64 (2.8 mm) Diameter. Pilot Hole 7 Fasten the panel to the door with the 10 screws provided in Counter bore Softwood ⁄64 (2.8 mm) Diameter. Pilot Hole lock hole the literature pack. (See Figure 19a). Remove theside. clamps lock hole Table C on back 1 Table C #10 ⁄2" 1 andx1 replace the gasket in the gasketOverlay extrusion channels of on back side. ⁄2" (13 mm) diameter panel #10the xscrew ⁄door. 2" Press and hold down this Some force may be required to seat the gasket drill through door panel, flush with top screw tab on the wire connector into the channels. Be sure the gasketFigure corners are seated Step 4: Assemble the panel to the door from other side (see of19a door. and pull the connector apart. Step 4: Assemble panel to door properly. Figure 19a The preferred methodthe of attaching thethe panel to the door detail above) 13⁄16" The preferred method theitpanel tomove the door is to clamp the panel of to attaching the door so cannot while (20.5 mm) counter bore, isdrilling to clamp the panel to the door so it cannot move while 7 the screw pilot holes. Use bar clamps or "C" clamps ⁄16" (11 mm) deep. drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the Step 5: Assemble lock parts with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be Two (2) lock extensions are provided with the lock. Use the panel thethe door. custom panel along shouldthe bewidth 33 1⁄2" 17 flushor with topThe of the door overlay and centered ⁄32longer " extension for " thick overlay panels and the shorter 31⁄2⁄4"mm) 17 flush with the See top of the door and centered along the width (89 ⁄ 32" 5 of the door. Figure 10a. Drill holes through the gasket (13.7 mm) 9 one for ⁄8" thick overlay (89 mm)panels. Assemble the lock extenofextrusion the door. using See Figure through the gasket (13.7 mm) the 1010a. holesDrill as holes pilot holes. Use the drill sion, cam stop washer, spring washer, and set screw to the extrusion the 10 pilot holes. Usenot theto drill size fromusing the chart in holes Table as "C", being careful drill lockHoles as shown in Figure 20 and 21. Overlay panel to in size from the in Tableof "C", to drillthan be centered on through the chart front surface thebeing panel,careful drill nonot deeper gasket through front surface of the panel, drill no deeper than 1 Stepthe widthinofthe door. 2: Remove the door gasket ⁄2" (12.7 mm) deep. If the overlay panel is thinner than Install this lock assembly into the lock hole overlay 1 retainer. ⁄25"⁄With (12.7 mm) mm) deep. If the panel is thinner than door laying on overlay ascrews flat surface and starting at a 8" (16the thick shorter will have to be obtained. panel and secure with the retaining nut on the back side 5 ⁄8Fasten "corner (16 mm) thick shorter will have to be obtained. of the door magnetic door gasket fromin the panel to remove the screws doorthe with the 10 screws provided with a 15 mm socket and ratchet. Make sure the key slot in Fasten the panel toofthe with the 10Remove screws provided in theliterature interior side thedoor door, see19a). Figure 10. Setthe theclamps gasket the pack. (See Figure Figure 10alock is vertical. Figure 19 the front of the the literature (See Figure 19a). Remove the clamps of aside on a pack. flat 1 and replace the surface. gasket in the gasket extrusion channels ⁄2" (13 mm) diameter 1 and replace the gasket in the gasket extrusion channels of ⁄2drill " (13through mm) diameter the door. Some force may be required to seat the gasket door panel, the door. Some begasket required tocorners seat the There 10 force holes insure the retainer extrusions, (3 on drill through door panel, into the are channels. Bemay the gasket aregasket seated from other side (see Step 6: Installfrom lock cam into the channels. suretop theand gasket corners each side and 2Be at the bottom whichare areseated used to other side (see 13 properly. " lock assembly with Attach the lock camdetail to theabove) back13of⁄16the properly. fasten the panel to the front of the door. The screws are detail above) ⁄ 16" (20.5provided. mm) counter bore, Forlock comprehensive installation instructions, the phillips head screw Orient the cam vertiprovided in the literature pack. (20.5 mm) counter bore, 7 ⁄16on " (11 cally when installing themm) lock.deep. please visit www.marvelrefrigeration.com 7 ⁄16" (11 mm) deep.
Step 5: Assemble lock parts Step 5: Assemble lock Two (2) lock extensions are parts provided with the lock. Use the
Two (2) lock extensions provided the and lock.the Use the longer extension for 3⁄4"are thick overlaywith panels shorter
