Transcript
24” Marvel High Efficiency Single Zone Wine Cellar Model # ML24WS****
•D ynamic Cooling Technology™ delivers rapid cooldown and the industry’s best temperature stability • MARVEL Intuit™ Integrated Controls provide precise temperature management from 40°F to 65°F •V ibration Neutralization System™ protects wine from vibration • Thermal-efficient cabinet ensures optimum wine preservation and energy efficiency while maximizing capacity • Tinted, UV-resistant dual pane glass door protects wine from damaging ultra-violet light • Two-stage, soft white theatre-style LED lighting and midnight black interior • Natural maple shelf fronts are stainable to match cabinetry • Three-quarter extension roller-glide shelf system prevents jarring • Close Door Assist System™ gently and automatically closes door • Panel overlay option features soft-close integrated hinge for a truly flush fit with cabinetry • Audible and visual alarms signal when door is left ajar to protect wine integrity and energy use • Vacation/Sabbath mode conserves energy during times when the unit is not in use and complies with Star-K requirements • Sleek stainless steel door, designer handle and adjustable black toe grill • Height adjustment up to 1” with leveling legs • Up to 2x more efficient than leading competitors • 4” black adjustable toe kick • 1-year warranty
Storage Capacity
Ordering Details
Up to 45 bottles total
Stainless Frame Glass Door, Right Hinge
ML24WSG2RS
Stainless Frame Glass Door, Left Hinge
ML24WSG2LS
Smooth Black Frame Glass Door, Right Hinge
ML24WSG2RB
Smooth Black Frame Glass Door, Left Hinge
ML24WSG2LB
Panel Overlay Frame Glass Door, Integrated Right Hinge
ML24WSF3RP
Panel Overlay Frame Glass Door, Integrated Left Hinge
ML24WSF3LP
Solid Panel Overlay Ready Door, Integrated Right Hinge
ML24WSP3RP
Solid Panel Overlay Ready Door, Integrated Left Hinge
ML24WSP3LP
No panel installation kit required.
Storage Configuration (1) 5-bottle gallery display wine rack (5) 8-bottle roller-glide wine racks
Product Dimensions 23⅞” W x 33¾” minimum H x 241/16” D (including handle)
Finish/Door Options
Stainless Steel
Black
Wood Overlay (Panel Ready)
Forced Air Fan
"A"
Evaporator Plate
"B"
Return Air Intake Front
"C"
24" Rough-In Dimensions
PRODUCT DIMENSIONS "A" 24” (61 cm)
PRODUCT DATA MODEL ML15WSG
ELECTRICAL REQUIREMENTS #
PRODUCT WEIGHT
115V/60Hz/15A
105 lbs (47.7 kg)
23 7⁄8”
"E" 115V/60Hz/15A 33 3⁄4” to 34 3⁄4”
ML24W*(P) (60.7 cm)or (F) (85.7 115V/60Hz/15A to 88.3 cm)
"C"
**34" to 35" (86.4 to 88.9 cm)
24” (61 cm)
Forced Air Fan
105 lbs (47.7 kg)
ML15WS(P) or (F) Cabinet 115V/60Hz/15A Dimensions
"D" ML24W*G
"B"
Evaporator Plate
140 lbs "F"
(63.6 kg)
23 23⁄32” 140 lbs (60.2 cm) (63.6 kg)
“G”
“H”
“J”
25 21⁄32” (65.2 cm)
46 13⁄32” (117.9 cm)
25 11⁄16” (65.2 cm)
Return Air Intake "J"
Front
Side
"H" "D"
"G"
Dynamic Cooling Technology™ delivers rapid cool down and the industry’s best temperature stability
"E"
The distinctive Marvel design features a
1"thermal-efficient cabinet and door combined (2.5 cm)Dynamic Cooling Technology™ for with
Figure 8
211⁄2" (54.6cm)
superior temperature stability, faster cooling times and speedy temperature recovery even with high frequency.
"F" * Depth dimension of rough-in opening may vary depend- Control Type Width 23 ⅞" Intuit™ Finishes APPLIES TO THE FOLLOWING MARVEL MODELS ing on each individual installation. To recess entire door "F" Vacation / Interior Finish Black Temperature Range 40° - 65° F ML15WS ML24WS dimension plus 1" (2.5 cm) for thickness of power cord plug Sabbath Mode ML24WD Lock NA is required. Capacity Up to 45 wine bottles Electrical Requirements
** Minimum rough-in opening required is to be larger than Shelving System Side mount - tray Length of Power Cord the adjusted height of the cabinet. Shelf Fronts
Black painted maple
Product Dimensions
# A grounded 15 amp dedicated circuit is required. Follow Depth to Front of Door Other Storage 1 roll-out 5 bottle display rack all local building codes when installing electrical and appliDepth to Handle ance. Interior Lighting 2 White LED Pods Toe Grill Finish
Black
Hinge Handle
Classic Hinge
!
Designer WARNING
120V / 60Hz / 15A 5'
CSA
Energy Star Certified
NA
23 23/32" 25 21/32" 46 13/32"
Shipping Weight
160 lbs
Finishes Key
SS = Stainless Steel B = Black Floor mount Anti-tip Bracket must be installed for freestanding applications. Not required for built in applications.O = Overlay
9
Yes
Agency Approvals
23 ⅞" W x 33 ¾" H x 21 ½" D
Depth with door at 90°
SS, B, O
OVERLAYDOOR DOORPANEL PANELINSTALLATION INSTALLATION OVERLAY
Overlay Panels
Clearance for screw head, ! To ! Clearance for po 4 places Clearance for fd r screw head, oo oo of overlay door panel must not exceed r screw head, f d 15 Weight of overlay Weight door panel must not 4 places po for a solid door model or 4 places To10 pounds exceed 15 poundspounds (6.8 kg)(6.8 for akg) solid (4.5 kg) (4.5 for akg) glass model. door model or 10 pounds for door a glass door model. Material Type #10 Wood Screw
Clearance r for hinge f doo po at top and o T bottom
Figure 15 Right Hand Hinged Door 15" (38.1 cm) wide appliance
1
Softwood
7
⁄8" (3.2 mm) Diameter. Pilot Hole ⁄64 (2.8 mm) Diameter. Pilot Hole
Figure 17 Table C Left Hand Hinged Door 24" (61 cm) wide appliance
Step 4: Assemble the panel to the door
The preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not marClearance the for hinge panel or the door. The custom overlay panel should be top and flush with the top of the door and centered along theatwidth bottom of the door. See Figure 12a. Drill holes through the gasket 23 ⁄ " extrusion using the 10 holes as pilot holes. Use the drill (60.3 cm) ⁄" size from the chart in Table "C", being careful not to drill (6 mm) Deep through the front surface of the panel, drill no deeper than 1 ⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5 ⁄8" (16 mm) thick shorter screws will have to be obtained. 1⁄" Fasten the panel 14"the 10 screws provided 4 ⁄ " to the door with (35.6 cm) (12.4 cm) in the literature pack. (See Figure 21). Remove (4.4 thecm) clamps 1 ⁄ " extrusion channels of and replace the gasket in the gasket 3⁄" (3 cm) (7.9the cm) gasket the door. Some force may be required to seat into the channels. Be sure the gasket corners are seated 3 ⁄ " properly. (9.8 cm)
143⁄4" (37.5 cm)
233⁄4" (60.3 cm)
⁄4" (6 mm) Deep 1
3
1
47⁄8" 5" (12.4 cm) (12.7 cm) 14" (35.6 cm) 3 1 ⁄8 " 13⁄16" (7.9 cm) 13⁄4" 13⁄16" (3 cm) 31⁄8" (3 cm) (4.4 cm) (7.9 cm) 13⁄4" (4.4 cm)
3 ⁄32" (9.8 cm) 27
1" (25.4 mm) diameter counter bore 1⁄4" (6 mm) deep 47⁄8" 4 places.
7
(12.4 cm)
3
8
3
327⁄32" (9.7 cm)
27
31⁄8"
3 1 ⁄8 " (7.9 cm)
This side facing This side interior facing
15⁄32" (2.9 cm)
interior
111⁄16" (4.3 cm) 41⁄8" (10.5 cm)
2" (5.1 cm)
2" (5.1 cm) 311⁄16"
DOOR PANEL INSTALLATION
4 places
4 1 ⁄8 " (10.5 cm) 1 ⁄2" Minimum 1
CAUTION
Weight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model. #10 Wood Screw
Hardwood
1
Softwood
7
111⁄16" (4.3 cm)
1 1 ⁄2 " (3.8 cm) typical
111⁄16" (3.8 cm) (4.3 cm) typical
Figure 20 Figure 16 Right Hand Hinged Door Right Hand Hinged Door 24" (61 cm) wide appliance ! 15" (38.1 cm) wide appliance
Material Type
⁄8" (3.2 mm) Diameter. Pilot Hole
Step 4: Assemble the panel to the door
The preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width of the door. See Figure 12a. Drill holes through the gasket DOOR PANEL INSTALLATION extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1 ⁄2" (12.7 mm) deep. If the overlay panel is thinner than 5 ⁄8" (16 mm) thick shorter screws will have to be obtained. earance for Fasten the! panel to the door with the 10 screws provided rew head, in the literature pack. (See Figure 21). Remove the clamps places Weight of overlay doorinpanel must not exceed 15 and replace the gasket the gasket extrusion channels of pounds kg) force for a may solidbedoor model 10the pounds the door.(6.8 Some required to or seat gasket (4.5 a glassBe door intokg) the for channels. suremodel. the gasket corners are seated properly.
CAUTION
31⁄8" (7.9 cm)
Hardwood Softwood
7
⁄8" (3.2 mm) Diameter. Pilot Hole ⁄64 (2.8 mm) Diameter. Pilot Hole
Table C
15⁄32" (2.9 cm)
To p
of
This side facing interior
1716
#10 x 1/2" screw
Step 4: Assemble the panel to the door
Figure 21 The preferred method of attaching the panel to the door
Clearance for head, 4 places
3011⁄32" screw (77.1 cm)
do
or
Material Type
311⁄16" (9.4 cm)
Press and hold down this tab on the wire connector and pull the connector apart.
13⁄4" (4.4 cm)
14" (35.6 cm)
3 ⁄8" (7.9 cm) 1
47⁄8" (12.4 cm)
13⁄16" (3 cm)
Figure 11
327⁄32" (9.8 cm)
Overlay panel flush with top and side of door.
1 ⁄4" (6 mm) radius is permissible
3 1 ⁄8 " (7.9 cm)
#10 Wood Screw
Hardwood
1
Softwood
7
⁄64 (2.8 mm) Diameter. Pilot Hole
Step 4: Assemble the panel to the door
The preferred method of attaching the panel to the door is to clamp the panel to the door so it cannot move while drilling the screw pilot holes. Use bar clamps or "C" clamps with pads on the clamping surfaces that will not mar the panel or the door. The custom overlay panel should be flush with the top of the door and centered along the width PANEL INSTALLATION of the door. See Figure 12a. Drill holes through the gasket extrusion using the 10 holes as pilot holes. Use the drill size from the chart in Table "C", being careful not to drill through the front surface of the panel, drill no deeper than 1 ⁄2" (12.7 mm) deep. for If the overlay panel is thinner than Clearance 5 ⁄8" (16 mm)screw thick head, shorter screws will have to be obtained. Fasten the panel to the door with the 10 screws provided 4 places in the literature pack. (See Figure 21). Remove the clamps and replace the gasket in the gasket extrusion channels of the door. Some force may be required to seat the gasket 13 Be sure the gasket corners are seated into theFigure channels. Left Hand Hinged Door properly. 15" (38.1 cm) wide appliance
31⁄8" (7.9 cm)
Clearance for hinge 2 places
3011⁄32" (77.1 cm) This side facing interior
Holes in gasket retainer.
Overlay panel to be centered on 4 ⁄ "width of door. 8
(10.5 cm)
2" (5.1 cm)
311⁄16" (9.4 cm)
#10 x 1/2" screw
15⁄32" (2.9 cm)
1
⁄8" (3.2 mm) Diameter. Pilot Hole
Table C
233⁄4" (60.3 cm)
⁄4" (6 mm) Deep
CAUTION
Weight of overlay door panel must not exceed 15 pounds (6.8 kg) for a solid door model or 10 pounds (4.5 kg) for a glass door model.
2" (5.1 cm)
OVERLAY DOOR
1
!
Figure 21
Figure 18 Left Hand Hinged Door 24" (6119 cm) wide appliance Figure Right Hand Hinged Door 24" (61 cm) wide appliance
Figure 12a #10 Wood Screw 1
3 1 ⁄8 " (7.9 cm)
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep 4 places
⁄64 (2.8 mm) Diameter. Pilot Hole
Table C
Material Type
8
41⁄8" (10.5 cm)
1 1 ⁄2 "
311⁄161" " (2.5 cm)(3.8 diameter cm) (9.4 cm)x 1⁄4" (6 mm) deep typical
(9.4 cm)
learance for crew head, places
Clearance for hinge at top and bottom x 1/2" 15⁄#10 32" (2.9 cm) screw
15⁄32" (2.9 cm)
4
OVERLAY DOOR PANEL INSTALLATION
3 1 ⁄8 " (7.9 cm)
31⁄8" (7.9 cm) (7.9 cm) Minimum
31⁄8" 3011⁄32" (7.9 cm) (77.1 cm) Minimum
1
1 ⁄4" (6 mm) radius is permissible
" (6 mm) ⁄4" (61⁄4mm) radius radius is is permissible permissible
30 ⁄32" (77.1 cm)
16
4
32
1
11
4
Hinge side of door
⁄4" (6 mm) Deep
Hinge side of door
Clearance Figurefor19hinge 2 places Right Hand Hinged Door 24" (61 cm) wide appliance 1
Hardwood
Hinge side of door
Hinge side of door
Hinge side of door
CAUTION CAUTION
1" (2.5 cm) diameter x 1⁄4" (6 mm) deep 4 places
Figure 20 Right Hand Hinged Door 24" (61 cm) wide appliance
143⁄4" (37.5 cm)
1 ⁄16" (4.3 cm) 11
1
⁄4" (6 mm) Deep Figure
1" (25.4 mm) diameter counter bore 1⁄4" (6.4mm) 5" 47⁄8" deep 4 places. (12.7 cm) (12.4 cm)
1 1 ⁄2 " (3.8 cm) typical
13⁄16" (3 cm)
3 1 ⁄8 " (7.9 cm)
13⁄4" (4.4 cm)
327⁄32" (9.7 cm)
⁄ " (6 mm) For comprehensive installation instructions, 17 radius is please visit www.marvelrefrigeration.com permissible 1
Magnetic Gasket
4
3011⁄32" (77.1 cm)
21
