Transcript
Massage Chair ME-9700 ㉭㏍㡩
Operation Manual ợ!!䒌!!娎!!㕲!!㙜! ợ!!䒌!!存!!㕲!!᷊
Please read this operation manual thoroughly before using this product www.masse.com.tw WR00092(S374) Ver.00
娯 ∽ ⼩ 姗 嫤 徲 㫈 㚐 娎 㕲 㙜 㔝 擯 ⤯ ợ 䒌 㚐 䒆 ␥! 孛 ∅ ⼩ 孊 孟 弫 㫈 㚐 存 㕲 ᷊ 㔝 ⤯ ợ 䒌 㚐 ḋ ␥!
Thank you for purchasing the Masse “ La Experia ME-9700 ” Before using this unit, please read these instructions completely for the correct usage and operation.
Contents Safety Precaution
01
Important
02
Troubleshooting and Safety
05
Components and Accessories
06
Installation
07
Function Description
11
Motorized Footrest Extension
20
Upper arm massager adjustment 21
ME-9700
Armrest Setup Intructions
22
Product Specification
24
Safety Instructions Please ensure that you have the correct electrical supply voltage for your unit.
1.To prevent injury, do not allow children or pets to play around the chair whilst it is in operation. 2. Stop using the chair immediately if you feel
unwell. 3. If the chair malfunctions, switch it off, unplug it immedia tely and contact the supplier. Do not attempt to disassemble or repair the chair yourself as this may result in injury 4. Keep hands/feet away from the back massage mechanism. 5. Unplug the chair before performing any routine cleaning or maintenance. 6. Users with any of the following conditions MUST consult their physicians before using the chair: (1) People with heart diseases. (2) People with malignant tumors. (3) Women who are pregnant or menstruating. (4) People with spinal abnormalities or curvature. (5) People who are medicated or under medication. (6) People with osteoporosis. (7)People in need of convalesce
1
Safety Instructions
Towel
7. STOP using the chair and UNPLUG the power cord if the leather or fabric cover is torn or worn-out and causing exposure of the mechanism, please contact our maintenance service immediately. 8. People, who wear hair products such as hair gel, hair spray, etc., should place a towel on the head rest to prevent damage to the upholstery from such products. 9. The chair is designed for use by one person at any one time 10.Children under the age of 16 are suggested not to use the massaging chair. 11. A maximum user weight limit of 120kg/260 pounds applies to this 12.Do not use this chair whilst under the influence of 2 alcohol. 13.Persons sensitive to heat should exercise caution when using the chair warmers.
Proper Use Of The Chair
"
IMPORTANT
ϡ In order to protect the chair and extend its life-span, please pay attention to the following instructions while using the chair.
1. All mechanisms built in the massage chair are designed for 60minute-non-stop use, exceeding time length may result in automatically shut down in order to protect internal mechanism. 2. In terms of comfortable massage, the suggested time of using the chair is less than 30-minutes. Exceeding above mentioned time length may result in feeling unwell or uncomfortable. If you are to use the chair for more than above suggesting time, please let the chair and users rest for a while (approx. 20 minutes), and then continue to use the chair. 3. DO NOT leave the chair running without using. 4. Some functions shall need 2~3 seconds to activate after pressing on the buttons, and some would need 5 seconds,especially switching defaulted programs to manual programs. 5. DO NOT rest or place heavy objects on the armrest, footrest or backrest, as it may Damage the chair. 6. When the chair is placed under 5 к (41л) environments for a period of time, its suggested to leave it in room temperature for an hour before using. 7. It is suggested to drink approx. 250cc of water after using the chair, this could also help with better blood circulation.
3
Maintenance of The Chair
If the chair is to be used in a harsh environment (i.e. salty or sulfurous surroundings), please contact our service department for advice on protecting your chair. Damage caused as a result of the environment due to non-notification, may void your warranty. Damage caused by unauthorized repairs or the replacement of spare parts, may void your warranty.
1. Storage Place the chair under non-humid environment and cover it with cloth, to prevent dusts and scratches to the upholstery. DO NOT expose the chair directly to the sun and DO NOT place the chair neighboring to other electric appliances, this could cause upholstery faded or cracked.
2. Maintenance Use a light leather oil to clean the upholstery and wipe down with a dry cloth. Do not clean the chair with cleansers containing alcohol or toluene . This may cause the upholstery to fade, harden and crack. Do not clean any of the upholstery in a domestic washing machine. Do not attempt to dry the upholstery in a tumble dryer or by using a smoothing iron. Do not drink fluids whilst using the massage chair. The warranty will be considered void if components are damaged due to liquid spillage.
3. Remote Control Please take care not to pull or stretch the remote control cable. Do not drop or allow the remote control to become trapped between any of the cushions. Damage of this nature will not be covered by the warranty.
Troubleshooting and Safety
STATUS
POSSIB LE REASON
Unable to a djus t Roller W id th
The width cannot be adjusted above the height of the shoulders due to the ‘shoulder detection’ feature.
The chair will not operate and the remote control is displaying an error message.
Please check if the plug is loose... Check if main power is on After confirming the roller has returned to its home position, restart the unit. Restart the unit, and if the error message still appears, note down the serial number and contact our service center.
ϡIf the message still appears, please contact our service center.
Friction noise from the back under kneading or dual function.
These are normal sounds made from components, please don’t worry.
Noise from the back while tapping. DO NOT use the chair if the Back Pad is flipped over or torn.
5
Components and Accessories
1
4
2
5
3
8
6 9
10
7
1 2 3 4 5
Headrest armrest air bags seat back pad armrest
main switch
6 7 8 9 10
metal frame support footrest Overhead cover back Cover Side plate
electrical inlet
6
Safety Instructions STEP 1Κ Lifiting up the Massage Chair Remove the chair from carton box. It is suggested for 4 people to lift the chair. according to the holding areas shown in the diagram below.
Holding Area (both sides of front armrest) Holding Area (both sides of the rear armrest )
Carton Box
7
Safety Instructions STEP 2Κ Setting up the Back Pad Place the back pad at the position where the zipper is on the backrest and zip up.
Backrest cushion STEP 3Κ Setting up the Back Warmer Attach the wire from the back pad(Male end)to the one from the backrest(Female end). and zip up the zipper,the back pad is now set up.
wire for warmer
Finished
Finished setting up
8
Safety Instructions STEP 4Κ Setup completion When the assembly is completed as instructed, connect the power cord as shown and switch on the power. The chair is now ready for use and to serve you with a relaxing and comfortable massage. If the power cord is connected but the chair will not operate, please check that the switch is ON (See below). Before attempting to operate the chair, please make sure that the Backrest/Footrest are clear of all obstacles.
Main Switch Fuse
Power 9
Power Cord
Moving the Chair Around
STEPΚ 1 Use both hands to raise the footrest for 10 and then move the chair.
10
10
Function Function Description Description ᖙ פ ܂౨ տ ฯ Fundamental function
Shoulder Position Detection Display
AUTO
Special Programs
Massage Roller Locations
AUTO
Timer / Speed Display Massage Rollers Elevating Direction Speed Adjustment (Kneading / Tapping /Dual Action)
Kneading ( Inverse)
Intensity Adjustment (Air Massage)
R o l l i n g (Up/Down)
Speed Adjustment / Running Directions (Foot Rollers)
Armrest airbag function
Backrest warmer
Width Adjustment (Massage Roller)
11
LCD SCREEN DISPLAY
Tapping
Seat Air Massage. (Activated section will f l a s h o n t h e di s p l a y ) . Foot Air Massage. (Activatedsection will f l a s h o n t h e di s p l a y ) . Calf Air Massage . (Activated section will f l a s h o n t h e di s p l a y ) .
Function Description Fundamental Functions
AUTO
1
2
18
TIMER
3
19
4
20
5
21
6
22
7
23
8
24 25
9
26
10
27
11
28
12
29
13
30 31
14
32
15
33
16
34 17
AIR MASSAGE
12
Function Description Fundamental Functions 1
LED screen
18
Power
2
Massage timer
19
Manual massage
3
Automated zone program
20
Relax massage program
4
Pause
21
Roller position downwards
5
Roller position upwards
22
Body sculpting massage
6
Vitality massaging program
23
3D On
7
Backrest adjustment - upwards
24
3D massage program
8
Kneading
25
3D retract
9
Backrest adjustment - downwards
26
Tapping
10
Width adjustments
27
Roller intensity
11
Footrest adjustment - up
28
Footrest extension
12
Duo action
29
Shiatsu
13
Footrest adjustment - down
30
Footrest retract
14
Warmer
31
Zero gravity
15
Foot Roller
32
Stretch program
16
Foot air massage
33
Arm air massage
17
Seat air massage
34
Calf air massage
Θ Do not use sharp, hard or foreign objects (including finger nails) to operate
88 13
the remote control buttons. Improper use may result in the damage of the remote control. Θ TURN OFF the power and keep the Remote Control in pocket after use. Θ DO NOT drop the remote control so as to protect the LCD screen. Θ Keep hands dry while operating the remote control. Θ DO NOT sit or step on the remote control. Θ DO NOT press too hard on the buttons.
Function Description Fundamental Functions Power (On/Off) Press this button to turn the chair ON and OFF. Pressing the ‘Power’ button at any time during the massage will stop the program and return the chair to its home position automatically.
TIMER
Press this button to set the massage timer from 5 to 30 minutes. Each press of the button will increase the timer count by 5 minutes. Note:This function is applicable to all functions, except for the 3 default programs.
BACK RECLINE
Backrest Adjustment (Up / Down) Press and hold the up or down arrow to adjust the backrest angle. Double-clicking will activate the backrest and footrest concurrently. When pressing “upward” motion, footrest will descend and draw back simultaneously. In order to protect internal electronic equipment, please don't operate this function more than twice during 5 min.
FOOT RECLINE
FootrestAdjustment (Up / Down) Press the button to control the footrest position. Double-click to synchronize the movement. When doing the downward?motion, backrest will draw back automatically. In order to protect internal electronic equipment, please don't operate this function more than twice during 5 min.
FOOT EXTENSION
Press the button to control the footrest extension positi on. Double clicking this button will extend the footrest to its maximum limit. In order to protect the internal electronic equipment, please do not operate this function more than twice within a 5 minute period. NOTEΚAbove 3 functions are still able to be operated even when Power is not on. NOTE : DO NOT extend the Footrest out if it's not lifted. NOTE : DO NOT sit on the Footrest especially when it's lifted and extended.
14
Function Description Special Programs
Special Program I.Vitality Massaging Program (Shown as SPECIAL I on display). Duration: 8 minutes (display shows minutes remaining). This program will start automatically once this button is pressed. This 8 minute massage program is mainly for vitality.
Special Program II. Relaxing Massage Program (Shown as SPECIAL II on display). Duration: 15 minutes (display shows minutes remaining). This program will start automatically once this button is pressed. This 15 minute massage program is mainly for relaxation and uses the Kneading massage technique.
Special Program III. Body Sculpting program (Shown as SPECIAL III on display). Duration: 15 minutes (display shows minutes remaining). This program will start automatically once this button is pressed. This 15 minute massage program is mainly uses the Tapping massage technique.
NOTEΚ While above Programs are under activation, the following functions is also applicable .
Special Program 3D. 3Dmassage program (Shown as SPECIAL A on display). Duration: 15 minutes (display shows minutes remaining). This program will start automatically once this button is pressed. This 15 minute massage program is mainly use both the Kneading and Tapping massage techniques.
88 15
Function Description Roller Adjustments
Pause button: Pressing this button will suspend all functions. Pressing it a second time will resume selected functions.
Width Adjustment ( 3 Levels) -Width Adjustment for Tapping and Rolling. -Running Sequences: Wide/Mid/Narrow. -This function is not available for Kneading, Dual, Auto Massage and Defaulted Massage Programs. -Narrow adjustments is not available above shoulder position. Intensity Control (6 Levels) -Intensity Adjustment for Tapping, Kneading and Dual. -The Intensity level is shown on the LCD.
Roller Position - UPWARDS -Roller Position Adjustment under MANUAL functions. -Roller Position Adjustment under AUTO functions. (Fixed&Partial). NOTEΚAdjustments are not available under Special Programs and Auto Massage.
Roller Position - DOWNWARDS -Roller Position Adjustment under manual functions. -Roller Position Adjustment under AUTO functions. (Fixed&Partial).
16 NOTEΚAdjustments are not available under Special Programs and Auto Massage.
Function Description Massage function adjustment 3D forward button: This function can increase the intensity of the massage. * This function can’t be used while using special functions. 3D retracting button: This function can decrease the intensity of the massage. * This function can’t be used while using special functions. Kneading button Press once to start kneading program, press again and the reverse program will start. On the third press, the program will stop. Duo action button Press once to start duo action program, press again and the reverse program will start. On the third press, the program . will stop. Tapping button Press once to start tapping program, press again and the program will stop. Rolling (Shiatsu) button Press to start the shiatsu program; press again to adjust the speed of shiatsu. To stop the function press any of the roller positioning control button.
17
Function Description Auto Massage
ZONE
Manual
Auto Preset time: 15 Minutes Select the desired program from the following: Overall, Partial, Shoulder, Back, Waist or Fixed. User selected program will flash on the display. ‘Shoulder Detection’ is activated automatically in this mode. Manual Preset time: 15 Minutes. (Can be adjusted from 5 to 30 minutes) Select the desired program from the following: Overall, Partial, Shoulder, Back, Waist or Fixed. User selected program will flash on the display. User may select different functions to massage concurrently. ‘Fixed Mode’ is not available under the Kneading functions.
Zero gravity during any function (except shoulder positioning function), . pressing this button will position the chair to the Zero gravity position, press again and the chair will return to home position.
Warmer Press to activate warming function, press again to end the function.
Stretching Press to activate stretching function, press again to end the function, but the chair position will not return to home position.
18
Function Description
Additional FunctionsΚ Foot Roller Massage (3 Levels) -Foot Roller Massage Button -Running Sequences: Low/Mid/High/Off -Press on the button for 3 seconds to change the rolling direction. (Foot Roller is active when the ‘Foot Roller Icon’ is flashing on the display.)
Air MassageΚ Arm Air Massage (2 Levels) -Arm Air Massage Button -Running Sequences: On/Off
Calves Air Massage (3 Levels) - Calves Air Massage Button -Running Sequences: Low/Mid/High/Off -Preset Time: 15 minutes(Can be adjusted up to 30 minutes) -You may select different functions to massage simultaneously.
Foot Air Massage (3 Levels) -Foot Air Massage Button -Running Sequences: Low/Mid/High/Off -Preset Time: 15 minutes(Can be adjusted up to 30 minutes) -You may select different functions to massage simultaneously.
19
Seat Air Massage -Seat Air Massage Button -Running Sequences: On/Off -Preset Time: 15 minutes(Can be adjusted up to 30 minutes) -You may select different functions to massage simultaneously.
Motorized Footrest Extension InstructionsΚ FOOT 1. Press buttons to adjust footrest extension to best fitting EXTENSION position; the maximum extend length is 22 cm. It is suggested to readjust Backrest angle to fit the extension better. 2. DO NOT stand or put heavy-objects on the Footrest, this may cause injuries or damages. 3. Please make sure there aren't any obstacles when adjusting the Footrest. 4. Do Not put hands in between, or underneath the seat pad and footrest.
almost 22cm
20
Upper arm massager adjustment
2
1
Usage instruction: 21
After pulling up the upper arm massager, there will be a screw that will allow you to adjust 3 sets of position. Users may adjust the position according to height. It is advised to slightly move the upper arm massager back and forth for a better extension.The adjusting ways will be the same for both left and right upper arm massager.
Armrest Setup Intructions
1
2 Armrest
1.Take out the armrest box from the outer box,then take out the right / leftarmrest from thearmrest box. Please beware of the metal partsonthe armrest , itmight damage the leather.
3
First fix the armrest after taking out the folded up position chair from the box. -Pull half of the metal cover out -Hold the armrest firmly -Front part of the armrest needs to be higher than the seat -Line up the notch with the backrest, identified by the red arrow, and push the armrest inwards.
4
Hold the armrest front part up with your hand, and lift up the side plate leather.
After connecting the armrest, check if the part has reached the outer leather patch.
5
Back
6
22 Pull the front part of the pulley plate assembly forward,and connect the hook from the pulley plate assembly part to the notch of the chairs side plate, then check if it is hooked on properly.
Take the round inner hexagon screw * 1, Open spring * 1 and flat washer *1
Armrest Setup Intructions
8
7
Take the hexagon screw driver *1 with the screw, stabilize the pulley plate assembly by screwing the hexagon screw in the front part of the assembly with the seat side plate notch.
Screw the assembly into position
10
9
Pull out the side plate leather and stick it firmly on the side.
Plug on the power cord and return the back rest to its home position.
11
12
Between the armrest and the back rest, use a screw driver toscrew M5 screw *1 into posion. 1. Check to see that the armrest can’t be pulled forward 2. Check that it does not aect the laying down posion when operang
From the back part of the chair’s power supply, pull o the pre-connected air pipe,while leaving it in the cloth cover. Insert the armrest air pipe through the cloth cover. Plug theair pipe,matching the number of the air pipe to the powerunit, 5, 6, 7 and 8,and opposite 1,2,3,4 set with the power unit.
23
Product Specification
Product NameΚME-9700 Product modelΚME-9700 VoltageΚ ϭ AC110-120V / 60Hz Γ ΓΓ!!!ϭ AC220-240V / 50Hz Max. ConsumptionΚ300W Timer Range : 5 - 30 minutes Lying Angle : approx. 125 - 175 degrees
24
