Preview only show first 10 pages with watermark. For full document please download

Material Safety Data Sheet

   EMBED


Share

Transcript

Material Safety Data Sheet In accordance with EU REACH Regulation (EC) No 1907/2006, EPSON has considered that a Safety Data Sheet is not required for the toner contained in this cartridge. To insure Epson's compliance with REACH information requirements, we will provide preparation information under the following format. Epson is not obliged to provide this information within European local languages. 1. Identification of The Substance/Preparation and of The Company/Undertaking 1.1. Identification of the preparation: EPSON Toner Cartridge S050167 1.2. Use of the substance/preparation: Laser Printing 1.3. Company/undertaking identification Manufacturer/Distributor: EPSON EUROPE B.V. Address: Entrada 701 1096 EJ Amsterdam The Netherlands TEL: +31-20-314-5029 FAX: +31-20-314-5729 e-mail: [email protected] Date Prepared: 20 May 2008 Revision: A 1.4. Emergency telephone: Giftnotruf Berlin +49 030-19240 2. Hazards Identification 2.1. Emergency Overview: This toner does not meet the criteria for dangerous classification according to EU Directive 1999/45/EC. This toner is a black powder that may cause eye irritation. Avoid contact with eyes or clothing. In the case of skin contact, wash with soap and water. Keep out of reach of children. 2.2. Potential Health Effects: Eyes: Toner contact with eye may be mildly irritating. Skin: Toner contact with skin may cause irritation, swelling or redness. Inhalation: Prolonged inhalation of excessive toner may cause respiratory tract irritation. Ingestion: May cause upset stomach. 3. Composition/Information on Ingredients This toner is a preparation. Composition CAS No. EEC No. EU registration No. % By Weight EU Symbols EU R-phrase EU OELs Remark Styrene acrylic resin Trade secret Trade secret Not available for the moment 80 – 90 None None None None Wax Trade secret Trade secret Not available for the moment 1 – 10 None None None None Carbon black 1333-86-4 215-6099 Not available for the moment 1 – 10 None None None None Titanium compound 12060-592 235-0441 Not available for the moment 1 – 10 None None None None Amorphous silica 7631-86-9 231-5454 Not available for the moment <1 None None None None Titanium oxide 13463-677 236-6755 Not available for the moment <1 None None None None MSDS T6230 Page 1 of 4 Version 6.1 Release Date 13 May 2008 4. First Aid Measures 4.1. Eyes: Immediately flush with room temperature, low pressure and clean water for at least 15 minutes. Seek medical attention if eye irritation continues. 4.2. Skin: Wash surface areas with soap and water. Wash soiled clothing before re-wearing. Consult a physician if irritation continues. 4.3. Inhalation: Remove subject to ventilated fresh air. If not breathing, give artificial respiration right away. If breathing is difficult, give oxygen. Seek immediate medical attention. 4.4. Ingestion: Seek medical advice; and attention if stomach continues to be upset. 5. Fire-Fighting Measures 5.1. Flammability: 5.2. Extinguishing Media: 5.3. Fire Fighting Instructions: 6. Accidental Release Measures 6.1. Personal precautions: 6.2. Environmental precautions: 6.3. Methods for cleaning up: This material has no unusual fire or explosive hazards. Dry chemical, carbon dioxide or water spray No special fire fighting procedures are required other than breathing apparatus. No special explosion hazards are known. Eye or Skin protection required during clean-up. Do not release to sewer, surface- or ground-water. Use wet sponges or cloths to wipe-up the materials, then rinse area with damp cloth. Place waste in closed container for disposal. Do not dispose of waste to the sewer. Wash hands with soap and water. 7. Handling And Storage 7.1. Handling: Keep out of reach of children. Do not dismantle cartridge. 7.2. Storage: Do not store the cartridge in high or freezing temperatures. Keep cartridge out of direct sunlight. Do not store cartridges with oxidizing agents or explosives. 7.3. Specific use(s): Not specified 8. Exposure Controls and Personal Protection 8.1. Exposure limit values: As total dust US: ACGIH-TLV is: 10mg/m3 US: OSHA-PEL is: 15mg/m3 Germany: DFG-MAK is: 4mg/m3 Australia: Worksafe-TWA is: 10mg/m3 8.2. Exposure Controls: 8.2.1. Occupational exposure control Proper ventilation, in prevention 8.2.1.1. Respiratory protection Not required under suitable use as setting the cartridge on the printer. 8.2.1.2. Hand protection Not required under suitable use as setting the cartridge on the printer. 8.2.1.3. Eye protection Not required under suitable use as setting the cartridge on the printer. 8.2.1.4. Skin protection Not required under suitable use as setting the cartridge on the printer. 8.2.2. Environmental exposure control Not established 9. Physical and Chemical Properties of Toner Formulation 9.1. General information Appearance: Black powder MSDS T6230 Page 2 of 4 Version 6.1 Release Date 13 May 2008 Odor: Almost odorless 9.2. Important health, safety and environmental information pH: Not applicable Boiling point: Not applicable Flash point: Not applicable Flammability (solid, gas): Not flammable Explosive properties: No data available Oxidizing properties: No data available Vapor pressure: Not applicable Relative density: 1.2 Solubility: No data available Water solubility: Insoluble Partition coefficient: n-octanol/water: Not applicable Viscosity: Not applicable Vapor density: Not applicable Evaporation rate: No data available 9.3. Other information Melting point: Around 125 deg. C 10. Stability and Reactivity Stability Stable under normal temperature Hazardous polymerization Will not occur 10.1. Conditions to avoid: High and freezing temperatures, electric discharge 10.2. Materials to avoid: Oxidizers and explosives 10.3. Hazardous decomposition products: CO, CO2 and NOx 11. Toxicological Information Routes Of Overexposure: Eye, skin, inhalation, and oral Acute Health Hazards: • Overexposure of eye surface to toner may be mildly irritating • Overexposure of skin to toner contact may cause irritation and in some people swelling and redness • Intentional inhalation overexposure to toner may result in respiratory tract irritation • Intentional or accidental oral ingestion may cause an upset stomach Chronic Health Hazards: Mugtagenicity: Carcinogenicity: MSDS T6230 Page 3 of 4 Prolonged inhalation of excessive dust may cause lung damage. It is attributed to “lung overloading”, a generic response to excessive amounts of any dust retained in the lungs for a prolonged interval. Use of this product, as intended, does not result in inhalation of excessive dust. In a study in rats by chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of rats in the high concentration (16mg/m3) exposure group, and a minimal to mid degree of fibrosis was noted in 22% of the animals in the middle (4mg/m3) exposure group. But no pulmonary change was reported in the lowest (1mg/m3) exposure group, the most relevant level to potential human exposures. Negative (by Ames test) Carbon Black is classified as “Group 2B (possibly carcinogenic to humans)” by IARC, the International Agency for Research on Cancer. With excessive exposure, carbon black has been listed as a possible human carcinogen. However, we obtained the results from a Chronic Toner Inhalation Study, that commercially available toner has no evidence of human carcinogens. All other ingredients are not classified as “Carcinogens”. Version 6.1 Release Date 13 May 2008 Toxicity Data: Oral LD50: >2000 mg/kg (Rat) Dermal LD50: No data available Inhalant LC50 :>5.14 (Rat, 4hour) Eye irritating: Minimal irritant (Rabbit) Skin irritating: Non irritant (Rabbit) Skin sensitizing: Non sensitizer (Guinea pig) 12. Ecological Information 12.1. Ecotoxicity 12.2. Mobility 12.3. Persistence and degradability 12.4. Bioaccumulative potential 12.5. Result of PBT assessment 12.6. Other adverse effects No data available on the adverse effects of this toner No data available on the adverse effects of this toner No data available on the adverse effects of this toner No data available on the adverse effects of this toner Has not carried out PBT assessment No data available on the environment on the environment on the environment on the environment 13. Disposal Considerations Disposal should be in accordance with federal, state, and local requirements. 14. Transport Information UN Class/UN Number: Not applicable 15. Regulatory Information EU Information: Chemical Safety Assessment according to (EC)1907/2006: This toner has not carried out any Chemical Safety Assessment yet. Symbols and indication according to 1999/45/EC: This toner does not meet the criteria for classification as dangerous. US Information: TSCA Section 4(a) Final Test Rules Regulated: TSCA Section 8(a) Preliminary Assessment Information Rule (PAIR): TSCA Section 8(a) Inventory Update Rule: Not regulated Not regulated Subject to a Special Regulatory Action under TSCA (2002 EPA Instructions, App. B) Not regulated TSCA Section 12(b) One-Time Export Notification Regulated: California Proposition 65: Not regulated Not regulated Canada Information: WHMIS Controlled Product: Not applicable (Manufactured article) Australia Information: Statement of Hazardous Nature: Not classified as hazardous according to criteria of NOHSC 16. Other Information List of relevant R-phrases: Nothing This “Material Safety Data Sheet” contains health, safety, and environmental information. It does not replace any precautionary language or use and disposal information which accompanies the product. The information contained herein is believed to be accurate at the time of preparation, but should only be used as a guide. It is subject to revision from time to time. EPSON does not warrant the completeness or accuracy of the information contained herein. MSDS T6230 Page 4 of 4 Version 6.1 Release Date 13 May 2008