Transcript
Quick Start Guide
MAZE EXCLUSIVE Waterproof Bluetooth Heatset
Indicator Light Charge Interface
＋
−
Charge for headset: 1. Headset can be charged in ON and OFF status, once you plug in charging cable, it will come back to OFF status. 2.Headset will be on stable red indicator light when charging, and the red light will be off when charging finish.
Volume + Multifunction Button Volume Microphone
Tap
Turn on/ off
Press Multifunction Button until blue light on / off
Adjust volume
Press+/-;Select the previous music and the next track.
Answer/End a call
Press Multifunction Button
＋
−
‘ Hold ＋
−
Double tap
Reject call
Hold Multifunction Button
Redial the last dialed out number
Press the Multifunction button twice quickly.
Start up voice dialing
Press Multifunction Button until “toot”sound
Switch call
Double Multifunction Button until “toot” sound
Pair
Hold Multifunction Button
Before using your new MAZE EXCLUSIVE Waterproof Bluetooth Headset for the first time, make sure it can match up to the mobile phone. 1. Make sure the headset already charged, the mobile is turned on, the bluetooth function is available. 2. Make sure the headset shutdown,then keep pressing multifunctional button until the light flashes blue and red alternately to entry pair mode. 3. To match headset with mobile. 4. After paired the first mobile, turn off the Bluetooth of phone and headset. 5. And then , restart the Bluetooth headset, to pair with second mobile, at last, turn on the Bluetooth of first mobile. II
12: 30
II
Settings
＋
Connectivity
II
II
12: 30
II
Connectivity
Devices Found
Add Bluetooth device
MAZE EXCLUSIVE
Enter Password
**** “ 0000” not required for some mobile phones
0000
−
“
Switch to telephone receiver, Press twice Multifunction button, could connect two telephone at the same time.
12: 30
II
Settings
Settings
Select
Back
Select
Back
Select
Back
While two mobile connected, one mobile is on the phone, the other mobile have incoming call, just press and hold the multifunction button could answer the phone.
