Transcript
MCK 2290/NTP Master Clocks Network Time Servers
MCK 2290/NTP Master Clocks Network Time Servers
Solari Master Clocks make it possible to manage centralized Network Time Displays / Clocks as well as time scheduling and energy management for other devices such as bell ringing, lights or heating systems. These devices are based on RISC 32 bits processors that guarantee high flexibility and functionalities.
display of 2 lines and 16 characters that show, time, date and various messages for diagnostics and operation. The devices are mains or PoE powered and, depending on the model and configuration, they have impulses memory up to 120 hours in case of mains power failure. There are various versions for wall, desk or rack mounting. Protection against overload and The MCK stores all the data relevant to shortcut. perpetual calendar and daylight saving times. The functional capacity of these Master Clocks The MCK NTP is a device with Ethernet consists in an innovative way to manage all interface that can be used both to synchronize parameters remotely from any PC using a a network PC or other Ethernet devices as well standard browser and a user friendly web as NTP or impulses clocks. It is easy to manage interface. When the Master Clock is not with a simple web interface and it is designed to connected to a Network it is still possible to use be modular for systems easy to scale. the traditional way to program the devices with a numeric keyboard of 18 keys and an LCD
Dimensions of Wall Mount MCK 2290 NTP
MCK 2290/NTP Master Clocks Network Time Servers MCK 2290 NTP, 19” Rack Version
GENERAL FEATURES MODEL
MCK 2290 NTP
Wall / Desk DIMENSIONS
177 x 208 x 106 mm (W x H x D)
Rack DIMENSIONS
430 x 65,5 x 411 (W x H x D)
WEIGHT
1 Kg
MOUNTING
Rack, Wall or Desk
TEMPERATURE RANGE
From 0° to +50° C
HUMIDITY
Max 85%
BACKUP POWER
Backup power in case of mains power loss and with clocks consumption: 24 Hours
POWER SUPPLY
Power over Ethernet 110V AC - 230 V AC, 50-60 Hz
INPUT / OUTPUT
ACCESSORIES
One output for 2-wired impulses 24V (max load 0,6A). Three outputs for external signaling One serial input/output RS232/485 Protocols: NTP, DHCP, SMTP, HTTP GPS receiver, POE Injector, WebMCK (Central Management Software)
Dimensions of MCK 2290 NTP Rack
41,3
430
65,6
Optional kit with GPS antenna
MCK 2290/NTP Master Clocks Screnshots of the Central Management Software WebMCK
This Software makes it possible to remotely monitor from any PC connected to the MCK Network, all the devices connected to the MCK. This software automatically manages the communication with devices such as Solari Network time Displays and assign automatically set-up configuration including the IP address (DHCP). This functionality save lot of time and costs during the installation and configuration phase. Devices can be managed in groups and eventual change in configuration of all the devices belonging to a group can be done once for all devices. Synchronization is NTP, GPS or with traditional 24V pulses.
SOLARI DI UDINE SPA Via Gino Pieri 29 33100 Udine Tel +39 0432 497.1 Fax +39 0432 480160
[email protected] www.solari.it
77062388
02/2010
