Preview only show first 10 pages with watermark. For full document please download

Mcp-03/s-mk2i Push On Units

   EMBED


Share

Transcript

Push on units MCP-03/S-MK2I • Flexible multimedia connection point • Ingress SafeTM - unique passive ingress reduction technology • Universal easy fit solution • Interchangeable input plate • Low insertion loss • Complies with EN Class A screening requirements • High quality connectors Overview The MCP-03/S-MK2I is a flexible push on solution for converting existing wall outlets into multimedia connections, allowing for high speed data services and trouble free use of analogue and digital RTV channels. The interchangeable input plate assembly enables easy installation on both standard double output radio/television wall outlets with IEC connectors and triple output radio/ television/data wall outlets. The circuitry within the MCP-03/S-MK2I is built with high grade components, offering high quality RF performance. The internal diplex filters provide high isolation and low insertion loss. Between the interchangeable input plate and the housing, there is a special gasket to prevent RF “leakage” and offer Class A screening. The smart mechanical design of the MCP-03/S-MK2I makes it easy to install. Apr/2012 - Version 1.3 Ingress Safe Our patented Ingress Safe technology uses a phase cancellation technique to considerably reduce ingress created within the home. It has no adverse effect on the CATV spectrum and is transparent to the forward and reverse path signals. • Significantly reduces noise on CATV networks, improving network performance • Field tests show Ingress Safe units in the distribution network can deliver improvement in the carrier to noise ratio that averages from between 3 dB and 12 dB, depending on the network topology • Prevents or delays the need to deploy technicians to rectify faults caused by the cumulative effects of ingress on network performance and customer service. EN Class A screening • High frequency shielding used on this product meets Class A requirements (EN 50083 2 2006) Technetix Group Limited e: [email protected] w: www.technetix.com Push on units MCP-03/S-MK2I Specifications Standard insert options MHz 5 - 65 85 - 120 120 - 862 862-1000 5 - 65 85 - 120 120 - 862 862 - 1000 16.0 12.0 15.0 14.0 16.0 12.0 16.0 14.0 5-1000 5-65 85-120 120-862 862-1000 5-65 85-120 120-1000 18.0 16.0 12.0 16.0 14.0 16.0 12.0 15.0 5-65 85-120 120-750 750-1000 5-65 120-862 862-1000 87.5-108 5-65 87.5-108 120-150 150-1000 5-65 86-10001 5-1000 18.0 14.0 16.0 14.0 16.0 15.0 14.0 12.0 20.0 12.0 16.0 20.0 20.0 20.0 25.0 Screening efficiency (dB, typ). Minimum exceeds Class A.2 5 - 30 30 - 300 300 - 470 470 - 950 950 - 1000 95.0 95.0 90.0 85.0 65.0 Materials Impedance (Ohm, typ) Equipment approval Nickel plated zinc die-cast 75 In to FM In to modem Return loss (dB, min) Standard IEC male IEC female Return loss (dB, min) 3-port insert plate IEC male IEC female Data Return loss (dB, min) Outputs with either insert plate Modem TV Isolation (dB, min) FM TV to FM Modem to TV1 Modem to FM CE IEC Male IEC Female IEC Female IEC Male IEC Female IEC Female TV Modem Radio TV Modem Radio 3-port insert options IEC Male IEC Female IEC Female IEC Male IEC Female IEC Female TV Modem Radio TV Modem Radio 74.72 22 22 37.30 30 20.50 65.86 6.0 2.5 3.0 5.0 2.5 2.0 53.72 5 - 65 120 - 1000 87.5 - 108 5-65 85-120 120-1000 65.86 In to TV 11.50 Insertion loss (dB, max) 7.50 Remarks 1 Where frequency is above 40 MHz, deduct 1.5 dB/Octave 2 Tested according to EN 50083-2 2006 Ordering information Measurements taken at room temperature Item Name Article number MCP-03/S-MK2I 10300138 © Copyright 2012 Technetix Group Limited. All rights reserved. This document is for information only. Features and specifications are subject to change without notice. Technetix, the Technetix logo, Ingress Safe, Modem Safe and certain other marks and logos are trade marks or registered trade marks of Technetix Group Limited in the UK and certain other countries. Other brand and company names are trade marks of their respective owners. Technetix protects its technology and designs by registering patents, trade marks and designs in Europe and certain other countries. Apr/2012 - Version 1.3 Technetix Group Limited e: [email protected] w: www.technetix.com