Transcript
148(L)mm
148(L)mm
HAIR DRYER
210(H)mm
User Manual
Model No.: KMD3501 *Before operating the unit, please read this manual thoroughly and retain it for future reference.
Fortress_MD3501 (Eng)_Cover
Fortress (MD3501) - Manual Size : 297x210mm (Eng) - Date : 27.5.13
Fortress (MD3501) - Manual Size : 297x210mm (Eng) - Date : 21.6.2011
Hair Dryer When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following: PLEASE READ INSTRUCTIONS CAREFULLY BEFORE USE AND RETAIN FOR FUTURE REFERENCE.
Hair Dryer 20. Do not operate the machine without supervision. If you should leave the work place, always switch the machine off or remove the plug from the socket (pull the plug itself, not the lead). 21. For household use only. 22. Never block the air openings or place it on soft surface (bed, couch or towel, etc.) WARNING : Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
Safety Information and Warnings 1. Always unplug appliance immediately after use. 2. Never use in a damp room, or near a sink or other vessel filled with water. 3. When the hairdryer is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hairdryer is switched off. 4. Always dry your hands before use. 5. For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice. 6. Do not place in or drop into water or other liquid. If an appliance falls into water, unplug appliance at mains socket immediately. Do not reach into the water. 7. An appliance should never be left unattended when plugged in. 8. Close supervision is necessary when using this appliance on young children or infirm persons. Young children should always be supervised to ensure they do not play with the appliance. 9. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 10. Use this appliance only for its intended use as described in this manual. Only use the attachments supplied by the manufacturer. 11. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or immersed in water. 12. For safety reasons, broken or damaged mains cord may only be replaced or repaired by an equivalent lead from the manufacturer or a similarly qualified technician. Please do not repair or replaced by yourself. 13. Keep the cord away from heated surfaces. Do not wrap the cord around the appliance. 14. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. 15. Do not use an extension cord with this appliance. 16. This product attachments will become hot during use. Do not let the heated surfaces come into contact with bare skin and eyes. Always hold the appliance by the handle and not by the cable. 17. Do not place the appliance directly on any surface while it is hot or plugged in. Always use the stand provided. 18. Attachments may become hot during use. Allow them to cool before handling and storing. 19. Do not operate this appliance with a voltage converter.
1
“Caution!! Never use this appliance in a bathroom or damp room. Do not use this appliance near bathtubs, showers, basins or other vessels containing waters.”
Initial and General Use 1. Fully unwind the mains cable. 2. Please use the voltage selector switch to select the operating voltage of 220-240V or 120V applicable to the area where you are located (see “Voltage Selection”). 3. Insert the plug into socket-outlet 220-240V / 120V, 50/60Hz 4. Adjust to the desired blowing strength: Position 0: Off Position 1: Half power, medium temperature for gentle drying and styling Position 2: Full power, high temperature for quick drying Cleaning and Care Clean the air suction opening from time to time with a fine brush. Clean the housing with a soft, dry cloth without additives. Voltage selection Use the voltage selector switch to select the correct operating voltage. The arrow points to the voltage selected. The selector switch can be turned using a standard screwdriver or a small coin. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. Subject to technical changes without prior notice!
2
Fortress (MD3501) - Manual Size : 297x210mm (Eng) - Date : 21.6.2011
(KMD3501)
3
