Preview only show first 10 pages with watermark. For full document please download

Mechanical Indicator Installation

   EMBED

Share

Transcript

STANDARD OR ULTRA THIN MECHANICAL INDICATOR with SET BACK KIT Installation Instructions EXTENDED INDICATOR PINS LIGHT ASSEMBLY JAMNUTS (2) LIGHT HOOKUP: RED WIRE - 12VDC + BLACK WIRE - 12 VDC GROUND EXTENSION BLOCKS (4) ISOLATION PLATE SWITCH PANEL (OPTIONAL) LOCK PLATE page 1 of 4 715 Center Street * Grayslake, IL 60030 * Office: 847-752-2700 * Fax: 847-752-2415 www.livorsi.com * [email protected] STANDARD OR ULTRA THIN MECHANICAL INDICATOR without SET BACK KIT Installation Instructions LOCKNUTS (4) LIGHT ASSY. (LED) JAMNUTS (2) SPACER BLOCKS LIGHT HOOKUP: RED WIRE - +12VDC BLACK WIRE - -12 VDC NUTS (4) CABLE ASSEMBLY TYPE: 30 - SERIES LOCK PLATE (1) page 2 of 4 715 Center Street * Grayslake, IL 60030 * Office: 847-752-2700 * Fax: 847-752-2415 www.livorsi.com * [email protected] STANDARD MECHANICAL INDICATOR 3 - 4- 5 SLOT TEMPLATE drill 4 - 3/4” holes drill 4 - 5/16” holes STANDARD MECHANICAL INDICATOR 1 -2 SLOT TEMPLATE drill 4 - 5/16” holes drill 4 - 1/2” holes page 3 of 4 ULTRA THIN MECHANICAL INDICATOR 3 - 4 SLOT TEMPLATE drill 4 - 1/2” holes drill 4 - 5/16” holes page 4 of 4