Transcript
EURO 2016
Table of Contents A
Company Overview
1
On-Off Thermostats
2
On-Off Thermostats – Programmable
3
Proportional Thermostats
4
Humidity Controllers
5
Fan Coil – Stand Alone Controllers
6
A/C Stand-Alone Controllers
7
Maxinet – Thermostat Network
8
Communication / B.M.S.
9
Multi Zone Systems
10 Dampers
___________________________________________
__________________________________________
______________________ ___ __
_______________________________________
__________________________________________
_______________________________
__________________________________ __
4-x 5-x 6-x
8-x
___________________________________________
9-x
___________________________________
______________________________________________
___________________________________________
15 Sensors & Accessories 16 Power Supplies
3-x
_ _ _ _ _ _ _ _ _ _ _ _ _ _ ___ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12 Air Quality – GAQ controllers
14 Special Controllers
2-x
7-x
_______________________________________________
13 HVAC Analyzers
1-x
__________________________________
___________________________________________________
11 Floor Heating
A
10-x 11-x 12-x 13-x 14-x
_________________________________________
15-x
________________________________________ ______
16-x
B
Types of Products
C
Contact Us
D
Product Index
___________________________________________
B
________________________________________________
C
_______________________________________________
D
Export Catalogue 2010 / P048068
Company Overview Founded in 1989, Meitav-tec is a veteran in the field of HVAC control systems with a reputation of excellence. Our vision and innovation are what set us apart from our competitors and allow us to succeed in this ever–changing industry. We provide intelligent control solutions for all types of HVAC systems for light commercial, residential or apartment applications. Our product range is vast, starting from the simplest of thermostats to the most advanced communication controllers. Our R&D department is always busy forecasting, predicting and creating, in order to ensure Meitav-tec's front line position in a world of constantly evolving technology. Each of our professional engineers boasts years of experience in hardware, software, telecommunications and networks, making them experts in their respective fields. In addition to the standard line of products, Meitav-tec specializes in developing & manufacturing, on a short time period, "tailor-made" products according to customers' specifications and special HVAC control needs. This makes us the obvious choice for all special projects and gives us an advantage among OEM players, a key part of our business. Meitav-tec has a global network of agents, distributors and OEM's in over 25 countries spreading across all 6 continents. Among our customers are many well-known companies, such as Airedale, Belimo, Carrier, Electra, Grüner, Johnson Controls, Sabiana, York and others. Meitav-tec's customers can benefit from caring support services regarding the installation, configuration and operation of its products. Meitav-tec is renowned for its stringent Quality Assurance and product reliability and has been awarded with ISO-9001:2000 Quality certification. Our dedication to quality guarantees product reliability and durability as well as process control and internal quality management. Beyond its first-class products, Meitav-tec endeavors to protect the environment by developing energy saving products. Greenhouse gases, produced, among others, by industrial processes, may excessively raise the temperature of our planet to hazardous levels. Meitav-tec is committed to the environment and fights global warming by designing its thermostats with smart algorithms to save money, save energy and save our planet.
www.meitavtec.com A
On/Off Thermostats
ETN-24-SUPER-SH Wall mount, 24VAC thermostat, Cool/Heat or
AC
Cool Only configuration, 1 or 3 fan speeds The ETN-24-SUPER-SH thermostat is a fully featured, stylish
COOL
thermostat suitable for light commercial, residential or apartment applications. It can control a large variety of HVAC systems with different
1/3
configurations. It offers both Cooling Only or Cool & Heat
SPEEDS
control systems. It also has selectable number of heating and cooling stages and multiple Fan Speeds. The ETN-24-SUPER-SH is an attractive thermostat, with a COMPRESSOR DELAY
large, easy to read display.
Features EXT. SENSOR OPTION
y
Wall mount, 24VAC thermostat
y
Selectable Configuration: Cool/Heat or Cool only
y
1 or 3 Fan speeds
y
y
Friendly algorithms and logic
y y
selectable:
* Option B – thermostat will change set point (Economy Mode)
Models
FAULT INPUT
Selectable display – ambient temperature or set temperature only
* Option A – thermostat will turn ‘OFF’
C
Fault input - To be used with door switch, window contact
Input – Normally open – Voltage free with 2 options
Model
Energy saving – cost efficient, Environmental
y
Offset – for temperature reading adjustment
y
Set point limits - password protected
y
Lock buttons – password protected
ALARM
LOCK OPT.
Wiring diagram Cool
Heat
Speeds
ETN-24-C1-1S-SH
1
N/A
1
ETN-24-C1-3S-SH
1
N/A
3
ETN-24-C2-1S-SH
2
N/A
1
ETN-24-C2-3S-SH
2
N/A
3
ETN-24-C3-1S-SH
3
N/A
1
ETN-24-HC11-1S-SH
1
1
1
ETN-24-HC11-3S-SH
1
1
3
ETN-24-HC12-1S-SH
2
1
1
ETN-24-HC12-3S-SH
2
1
3
ETN-24-HC22-1S-SH
2
2
1
ETN-24-HC23-1S-SH
3
2
1
www.meitavtec.com |
[email protected]
1-1
On/Off Thermostats
ETN-24-SUPER-SI Wall-mount, 24VAC thermostat, Cool & Heat or Heat Pump- selectable, multiple heating & cooling stages, Auto-Fan selectable, IR option
COOL
The ETN-24-SUPER-SI thermostat is a fully featured, stylish thermostat, suitable for light commercial, residential or apartment applications. ECONOMY
It can control a large variety of HVAC systems with different configurations; both Cool & Heat or Heat Pump
HP/HC
systems and has a selectable number of heating and cooling stages. The ETN-24-SUPER-SI is an attractive, wall mount thermostat with a large, easy to read display.
Features
ALARM
y
24VAC thermostat
y
Selectable Configuration: Cool/Heat or Heat Pump
y
Input – Normally open – Voltage free. To be used
y Selectable display – ambient
with door switch, window contact, etc. 2 options selectable:
temperature or set temperature only
y Offset – for temperature reading adjustment
* Option B – thermostat will change set point (Economy Mode)
y Set point limits password protected y Emergency heat selectable in heat
control
friendly thermostat
Wiring diagram
Models
1-2
Cool
Heat
Speeds
ETN-24-HC11-1S-SI
1
1
1
ETN-24-HC22-1S-SI
2
2
1
ETN-24-HC32-1S-SI
2
3
1
ETN-24-HP21-1S-SI
1
2
1
ETN-24-HP32-1S-SI
2
3
1
ETN-24-HP42-1S-SI
2
4
1
www.meitavtec.com |
[email protected]
LOCK OPT.
pump mode
y IR option – for hand held remote
Energy saving – cost efficient, environmental
Model
FAULT INPUT
y Lock buttons – password protected
* Option A – thermostat will turn ‘OFF’
y
TIMER
RT03
On/Off Thermostats
ETN-24-SUPER-SF Wall mount, 24VAC thermostat, H/C or Heat Pump configuration, with Filter counter The ETN-24-SUPER-SF thermostat is a fully featured, COOL
stylish thermostat suitable for light commercial, residential or apartment applications. It can control a large variety of HVAC systems with different configurations. It is applicable both for
HP/HC
Cool/Heat or Heat Pump systems and has a selectable number of heating and cooling stages. The ETN-24-SUPER-SF is an attractive, wall mount thermostat, with large, easy to read display.
Features y Wall mount, 24VAC thermostat
y Energy
saving
–
cost
efficient,
environmental friendly thermostat
y Cool/Heat or Heat Pump – selectable by choosing
ECONOMY
y Filter counter in hours- range: 0-900
DIP switch position
(adjustable)
y Fault Input – Normally open – Voltage freeindication on display only. Turn system Off or
y External sensor- option
Economy - selectable
y Lock – Unlock buttons function
y Selectable display – ambient temperature or set
TIMER
y Emergency heat selectable in heat pump
temperature only – selectable by choosing DIP
mode
ALARM
switch position
y Multiple heating and cooling stages
y Offset – for temperature reading adjustment
y IR remote control- option
y Set point limits - password protected
LOCK OPT.
EXT. SENSOR OPTION
Wiring diagram
Models Model
Cooling Stages
Heating Stages
Fan Speeds
Window Contact
ETN-HC11-1S
1
1
1
+
ETN-HC22-1S
2
2
1
+
ETN-HC32-1S
2
3
1
+
ETN-HP21-1S
1
2
1
+
ETN-HP32-1S
2
3
1
+
ETN-HP42-1S
2
4
1
+
www.meitavtec.com |
[email protected]
RT03
1-3
On-0ff Thermostats
FMH-220-HP11-3S-IR Flush Mount thermostat, 220VAC, Heat & Cool
AC
outputs (Heat Pump configuration) with 3 fan speeds and IR
The FMH-220-HP11-3S-IR is a fully featured, flushHEAT
mount thermostat suitable for commercial or residential applications to control a large variety of HVAC systems. This easy to operate thermostat has one output for Cool and one output for Heat Pump (On/Off), 3 fan
AUTO FAN
speeds and IR option. The FMH-220-HP11-3S-IR is a smart looking thermostat with a soft aesthetic shape
ECONOMY
and a large, easy to read LCD display.
Features y Flush mount, 230VAC Thermostat
COMPRESSOR DELAY
friendly thermostat
y Heat Pump configuration
TIMER
y Daily digital timer – optimal when you are a
y 3 Fan Speeds
way or asleep (from Remote Control)
y Auto fan- selectable
y 3-minute compressor delay
y Auto speed - selectable
y Temperature offset – adjustable
y Remote Control – option
Wiring diagram HE
Heat Pump (0.5A)
RE
Compressor (0.5A)
3
Low
2
Medium
1
High
Fan (3A)
L
Main Input 230VAC N
1-4
y Energy saving – cost efficient, environmental
www.meitavtec.com |
[email protected]
RT03
On-off Thermostats
FMH-24-C2-3S-IR Flush Mount Thermostat, 24VAC, Cool only -
AC
two outputs for Cool, 3 fan speeds and IR option COOL
The FMH-24-C2-3S-IR is a fully featured, flush-mount thermostat suitable for commercial or residential applications to control a large variety of HVAC systems. It is targeted for Cool and Fan Only applications and has 2 outputs for Cool and 3 fan speeds.
AUTO FAN
The FMH-24-C2-3S-IR is a smart looking thermostat with large, easy to read LCD display and a simple user interface.
ECONOMY
COMPRESSOR DELAY
Features y Flush mount, 24VAC thermostat
y Remote Control – optional
y Cool Only Thermostat, with 2 Cooling stages
y Energy saving – operates up to 2 compressors,
y Fan modes: Fan on / Auto fan / Auto speed y 2 outputs for Cool y 3 Fan Speeds y Auto fan - selectable y Auto speed - selectable
TIMER
if needed by smart logic algorithms
y 3-minute compressor delay (to protect the
RT03
compressor)
y Automatic temperature offset y Daily, digital Timer from Remote control – optimal when you are asleep or away
Wiring diagram
www.meitavtec.com |
[email protected]
1-5
On-Off Thermostats
FMH-220-HC11-3S-IR Flush Mount, 220VAC thermostat with Heat
AC
and Cool outputs, 3 fan speeds and IR option
The FMH-220-HC11-3S-IR is a fully featured, flushmount
thermostat
suitable
for
commercial
or
residential applications to control a large variety of HVAC systems. This easy to operate thermostat has one output for Cool and one output for Heat Element (On/Off), 3 fan speeds and IR option. The FMH-220-HC11-3S-IR is a smart looking thermostat
AUTO FAN
with a soft aesthetic shape and a large, easy to read LCD display.
Features y Flush mount, 230VAC thermostat y 2 separate outputs for Cool and Heat y 3 Fan Speeds y Remote Control – option y Temperature offset – adjustable y Daily, digital Timer from RC – optimal when you are asleep or away
COMPRESSOR DELAY
y Energy saving – cost efficient, environmental friendly thermostat
y 3 minutes compressor delay
1-6
www.meitavtec.com |
[email protected]
C
(to protect the compressor)
y Auto fan – selectable y Auto speed – selectable y Type of heater (electric heater or oil heater) – selectable
Wiring diagram
TIMER
RT03
On/Off Thermostats
FMT-24-SUPER AC
24VAC, Flush-mount thermostat, with up to 3 stages for Heat and 2 stages for Cool The FMT24-SUPER thermostat is a flush- mount, stylish thermostat for commercial or residential applications. It has both Heat/Cool and Heat Pump configurations and multiple cooling and heating stages. It offers useful features for cold locations, such as Low Temperature Alarm and Emergency Heat. Overall, the FMT24-SUPER is a sleek, attractive thermostat and a convenient solution for many HVAC systems.
AUTO FAN
Features y Main input- 24VAC
y Economy mode
HP/HC
y User Selectable applications:
y Emergency Heat – compressor stops working;
C
only Heat Element will be used for Heating
* Heat/Cool or Heat Pump
F
y Low temp. alarm indication –
* Electric Heat or Oil/Gas
when less than 6°C (45°F)
* Heat Pump in Heat or Heat Pump in Cool
ALARM
y With/without compressor delay
y C or F temp. scale display
y IR remote control- option
y Offset – for temp. reading adjustment ±6°C/F
COMPRESSOR DELAY
y Temp. limits for Cool & Heat - 10..30°C (50..88°F)
Models Cooling Stages
Heating Stages
Fan Speeds
FMT-24-HC11-1S
1
1
1
FMT-24-HC22-1S
2
2
1
FMT-24-HP21-1S
1
2
1
Model
FMT-24-HP32-1S FMT-24-SUPER
2
3
1
ALL-IN-ONE
ALL-IN-ONE
1
Wiring diagram
www.meitavtec.com |
[email protected]
1-7
On/Off Thermostats
ERT-208 Wall mount, 230VAC thermostat, with 2 compressors - Heat-Pump configuration, 1 fan speed, 12-hour timer and a Remote Control COOL
option.
The ERT-208 is a fully featured, stylish thermostat suitable for Central Mini-Duct or Split-Unit A/C systems. It has 2 compressors – heat pump configuration with 1 fan speed, 12-hour timer and a remote control option. The ERT-208 is an easy to use thermostat, with a large, easy to read LCD display. COMPRESSOR DELAY
Features y Wall-mount, 230VAC thermostat
y Temperature set-point limits
y 2 compressors, Heat Pump configuration
y 12-hour Timer - automatically turns
y 1 fan speed y Auto Fan y 3 minute compressor delay for compressor protection
y Display of Ambient temperature / Set temperature y Energy saving – cost efficient, environmental friendly thermostat
Wiring diagram
1-8
www.meitavtec.com |
[email protected]
on/off unit within 12-hours
C
y Option for a Remote Control – (with 24-hour timer)
y Large & easy to read LCD display y Comfortable silicon rubber buttons
RT03
On/Off Thermostats
ERT-209 Wall mount, 230VAC Thermostat,
AC
with 2 compressors for Cooling and 2 Heat Elements, Timer and IR (option) COOL
The ERT-209 is a fully featured thermostat suitable for Central Mini-Duct or Split-Unit AC systems. It has outputs for 2 compressors and 2 Heat Elements – H/C configuration, 1 fan speed, 12-hour timer and a remote control option. The ERT-209 is an easy to use thermostat, with a large, easy to read display.
Features ECONOMY
y Wall-mount, 230VAC thermostat y 2 compressors for cooling, 2 heat elements for heating y 1 fan speed y 12-hour Timer - automatically turns on/off within 12-hours
y Remote Control - optional
y Energy saving – cost efficient, environmental friendly thermostat
C
y 3 minute delay for compressor protection y Heat Off Fan delay
RT03
y Ambient temperature display – selectable y Large & easy to read LCD display
Wiring diagram
www.meitavtec.com |
[email protected]
1-9
On-off Thermostats
ERT100-LCD-IR
AC
Wall mount, 230VAC Thermostat, Heat-Pump configuration, 12-hour timer and an option for a Remote Control Unit.
COOL
The ERT100-LCD-IR is a fully featured thermostat HEAT
suitable for central mini-duct or split-unit AC systems. It has heat pump configuration, 3 fan speeds, 12-hour timer and a remote control option.
The ERT100-LCD-IR is an easy to use thermostat with a clear, easy to read LCD display. COMPRESSOR DELAY
TIMER
Features y
Wall-mount, 230VAC thermostat
y
1 compressor for both Cool and Heat (Heat
Energy saving – cost efficient,
y
Remote Control - optional
y
3 fan speeds
y
Large & easy to read LCD display
y
Auto Fan - selectable
y
Comfortable silicon rubber buttons
y
3 minute compressor delay
y
Ambient temperature display
y
12-hour Timer - automatically turns the unit
Wiring diagram
www.meitavtec.com |
[email protected]
C
Environmental Friendly thermostat
Pump)
on/off within 12-hour
1-10
y
(display/hide) - optional
ECONOMY
On-Off Thermostats
TED-220-HP11-3S Wall mount, 220VAC thermostat, with 2 outputs for
AC
Cool & Heat (Heat Pump), 3 fan speeds and LCD display
FC
The TED-220-HP11-3S thermostat is suitable for commercial or residential applications to control a large variety of HVAC
COOL
systems, including fan coils. HEAT
This mechanical thermostat offers Cool and Heat outputs as well as 3 fan speeds, making the TED-220-HP11-3S the perfect solution for basic and simple climate control. COMPRESSOR DELAY
Features y Wall mount, 220VAC main supply y 2 Outputs for Cool and Heat (HP)
y Energy saving – cost efficient, Environmental Friendly logic
y Large, easy to read LCD display
y 3 Fan Speeds y External sensor – option
ECONOMY
y Display for ambient temperature and set point
EXT. SENSOR OPTION
y Compressor delay algorithm
Wiring Diagram External sensor (option)
T
T 3
Fan Low (2.6)
2
Fan Medium (2.6)
HE
Heat Pump (0.5A)
1 RE
Fan High (2.6) Compressor (0.5A)
0
Main Input 230VAC ~
www.meitavtec.com |
[email protected]
1-11
On-Off Thermostats
TED-220-HC11-3S Wall
mount,
220VAC
thermostat,
with
AC
temperature display suitable, for fan coil applications and Air Conditions with H/C
FC
configurations (no Heat Pump).
The TED-220-HC11-3S thermostat is suitable for
COOL
commercial or residential applications to control a large variety of HVAC systems, including fan coils.
This mechanical thermostat offers Cool and Heat outputs as well as 3 fan speeds, making the TED220-HC11-3S the perfect solution for basic and simple climate control.
Features y Wall mount, 220VAC Main supply y 2 Outputs for Cool and Heat y 3 Fan Speeds y External sensor - option
Wiring Diagram
1-12
www.meitavtec.com |
[email protected]
y Energy saving – cost efficient, Environmental Friendly logic
y Large, easy to read LCD display y Display for ambient temperature and set point
EXT. SENSOR OPTION
On-Off Thermostats
TED-24-SUPER Wall-mount, 24VAC thermostat, for both AC applications as well as Fan Coils.
AC
The TED-24-SUPER thermostat suits commercial or
FC
residential applications to control a large variety of HVAC systems, including fan coils.
COOL
This mechanical thermostat offers up to 2 stages for Cool
HEAT
and 2 stages for Heat, making the TED-24-SUPER the perfect solution for basic and simple climate control.
Features y Wall mount, 24VAC thermostat y Heat Pump or Heat/Cool configuration available; jumper selectable
AUTO FAN
y LCD display for ambient temperature and set point
HP/HC
y External sensor – option ECONOMY
y Suitable for fan coil applications
y °C or °F scale available- jumper selectable
y Heat Output configuration- Electric or Oil/Gas;
y Fault input (24VAC) – red led indication
C F
jumper selectable COMPRESSOR DELAY
y Energy saving – cost efficient, environmental friendly thermostat
Wiring Diagram
www.meitavtec.com |
[email protected]
1-13
On-Off Thermostats
TED-220-C1-3S Wall
mount,
220VAC
thermostat,
with
temperature display, suitable for Fan Coil applications (Cool only)
The TED-220-C1-3S thermostat is suitable for commercial or residential applications to control a large variety of Fan Coil systems. ECONOMY
This mechanical thermostat offers an output for Cool
C
as well as 3 fan speeds, making the TED-220-C1-3S the perfect solution for basic and simple climate
EXT. SENSOR OPTION
control in Cool Only configuration systems.
Features y Wall mount, 220VAC thermostat y Output for Cool valve
y External sensor – optional
Wiring Diagram External sensor (option)
T LO
Fan Low (2.6)
ME
Fan Medium (2.6)
HI
Fan High (2.6)
RE
Compressor (0.5A)
0
Main Input 230VAC ~
1-14
Friendly thermostat
y Large, easy to read LCD display
y 3 Fan speeds
T
y Energy saving – cost efficient, Environmental
www.meitavtec.com |
[email protected]
y LCD display for ambient temperature and set point
On-Off Thermostats
TED-24-AUTO-SUPER Wall-mount, 24VAC thermostat, with 2 outputs for
AC
Heat and 1 output for Cool with 1 fan speed (24VAC)
The TED-24-AUTO-SUPER thermostat suits commercial or
COOL
residential applications to control a large variety of HVAC systems.
This mechanical thermostat offers 1 stage for Cool and 2 stages for Heat. Its easy to change configuration, using only jumpers,
makes
the
TED-24-AUTO-SUPER
the
perfect
solution for basic and easy climate control.
Features y Wall mount, 24VAC thermostat y Heat Pump or Heat/Cool configuration available; jumper selectable
y Heat Output configuration- Electric or Oil/Gas; jumper selectable
y LCD display for ambient temperature and set point
y External sensor – option
AUTO CHANGE-OVER
y °C or °F scale available- jumper selectable y Fan/Auto Fan
EXT. SENSOR OPTION
y Auto-Change-Over mode y Energy saving – cost efficient, environmental friendly thermostat
Wiring Diagram
www.meitavtec.com |
[email protected]
1-15
On-Off Thermostats
TES-220-HC11-3S Wall mount, 220VAC thermostat, for Air
AC
Conditioning & Fan Coil applications.
The TES-220-HC11-3S thermostat suits commercial or residential applications and can control a large variety of HVAC systems,
COOL
including fan coils. HEAT
This mechanical thermostat offers Cool and Heat outputs as well as 3 fan speeds, making the TES-220-HC11-3S the perfect solution for basic and simple climate control.
ECONOMY
C
Features y Wall mount, 220VAC thermostat y Outputs for Cool & Heat
y Energy saving – cost efficient, Environmental Friendly thermostat
y Simple design and logic
y 3 Fan speeds
y External sensor – option
Wiring Diagram External sensor (option)
T
T 3
Fan Low (2.6)
2
Fan Medium (2.6)
HE
H. Element (0.5A)
1 RE
Fan High (2.6) Compressor (0.5A)
0
Main Input 230VAC ~
1-16
www.meitavtec.com |
[email protected]
On-Off Thermostats - Programmable
ETN-24-SUPER-3S-FP-PROG-EU-C 24VAC, wall-mount thermostat, with 5-1-1 days,
AC
Europe-type weekly program built-in, with Freeze Protection, for multiple HVAC configurations
FC
The ETN-24-Super-3S-FP-Prog-EU-C is an aesthetic, easy to use thermostat for commercial and residential applications.
COOL
It can control a large variety of HVAC systems with either Heat/Cool or Heat Pump configurations and offers numerous
HEAT
selectable or user adjustable features, such as Freeze Protection to protect system from freezing, Offset for temperature reading or an option for 3 minute compressor delay.
AUTO CHANGE-OVER
Its 5-1-1 program, with 4 x start time/ stop time per day is easy to use and can provide 24-hour comfort as well as energy savings. Overall, the ETN-24-Super-3S-FP-Prog-EU-C is an attractive, wall mount thermostat with a large, easy to read display.
Features
ECONOMY
y Wall-mount, 24VAC thermostat
y Energy saving thermostat
y DIP switch selectable configurations:
y Lock / Unlock thermostat buttons
* Heat/Cool or Heat Pump system
y Temp. scale - °C
* Electric or Oil/Gas heat system
y 3 minutes compressor delay – optional (DIP
* Heat Pump in Cool or Heat
y 5-1-1 programmable – 4 x start time / stop time per day y Modes: Cool, Heat, Auto Mode, Fan Only y 3 fan speed + Auto Speed y Set point limits- 10…30°C y Freeze protection – adjustable
switch selectable)
y Internal or external sensor – DIP switch selectable
y External sensor- option
PROG
TIMER
COMPRESSOR DELAY
C EXT. SENSOR OPTION
y IR remote control – option y Weekly Timer
FREEZE PROTECT
y Offset – for temp. reading adjustment - ±6°C LOCK OPT.
Wiring diagram
www.meitavtec.com |
[email protected]
2-1
On-Off Thermostats - Programmable
ETN-24-SUPER-PROG-EU Series 24VAC, wall-mount thermostat,
AC
with 5-1-1, Europe-type weekly program built-in and multiple Cooling and Heating stages The ETN-24-Super-Prog-EU is a stylish thermostat well suitable for commercial and residential applications.
HEAT
It can control a large variety of HVAC systems with either Heat/Cool or Heat Pump configurations and
HP/HC
offers a selectable number of heating and cooling stages. Its 5-1-1 program, with 2 x start time/ stop time per day is easy to use and can provide 24-hour comfort as
ECONOMY
well as energy savings. Overall, the ETN-24-Super-Prog-EU is an attractive, wall mount thermostat with a large, easy to read display.
TIMER
Features COMPRESSOR DELAY
y Wall-mount, 24VAC thermostat
y External sensor- option
y DIP switch selectable configurations:
y Lock – Unlock thermostat buttons
* Heat/Cool or Heat Pump system
y °C scale, 24hrs clock
* Electric or Oil/Gas heat system
y 3 minutes compressor delay – optional
y 5-1-1 programmable – 2 x start time / stop time per day
y Offset – for temperature reading adjustment LOCK OPT.
y Internal or external sensor – DIP switch
y 1 fan speed
selectable
y Emergency Heat selectable in Heat Pump mode y Set point limits- 10…30°C
y IR remote control – option y Weekly Timer
Models
2-2
EXT. SENSOR OPTION
(DIP switch selectable)
* Heat Pump in Cool or Heat
Wiring diagram Cooling stages
Heating stages
ETN-24-HC11-PROG-EU
1
1
ETN-24-HC22-PROG-EU
2
2
ETN-24-HP21-PROG-EU
1
2
ETN-24-HP32-PROG-EU
2
3
Model
C
www.meitavtec.com |
[email protected]
On-Off Thermostats - Programmable
ETN-24-SUPER-PROG-7DAYS-US Series 24VAC, Wall mount thermostat with 7-days,
AC
USA-type weekly program built-in and multiple Cooling and Heating stages
The ETN-24-Super-Prog-7 Days-US is a stylish thermostat that is well suited for commercial and residential
HEAT
applications. It can control a large variety of HVAC systems with either
HP/HC
Heat/Cool or Heat Pump configurations and offers a selectable number of heating and cooling stages. Its 7-Day program, with 1 period (Set Cool/Set Heat) per day, is easy to use and can provide 24-hour comfort as well
ECONOMY
as energy savings. Overall, the ETN-24-Super-Prog-7 Days-US is an attractive,
TIMER
wall mount thermostat with a large and easy to read display.
C
Features y Wall-mount, 24VAC thermostat
y Filter counter in hours- range: 0-900 (adjustable)
y DIP switch selectable configurations:
EXT. SENSOR OPTION
y Offset for temp. reading adjustment - ±6°C
* Heat/Cool or Heat Pump system
RT03
y Set point limits for Cool & Heat (5…30°C)
* Electric or Oil/Gas heat system
y External sensor- option
* Heat Pump in Cool or Heat
y 7-day programmable – 1 period per day, each with Set
y Lock – Unlock thermostat buttons y Voltage-free, normally-open fault input. Will
Heat and Set Cool
show signal on thermostat when active
y Separate Cooling & Heating set points
LOCK OPT.
COMPRESSOR DELAY
FAULT INPUT
y 3 minutes compressor delay – optional (DIP
y Emergency Heat available in Heat Pump mode
switch selectable)
y °C scale, 24 hr clock
Wiring diagram
Models Cooling stages
Heating stages
ETN-24-HC11-7DAYS-PROG-US
1
1
ETN-24-HC22-7DAYS-PROG-US
2
2
ETN-24-HP21-7DAYS-PROG-US
1
2
ETN-24-HP32-7DAYS-PROG-US
2
3
ALL-IN-ONE
ALL-IN-ONE
Model
ETN-24-SUPER-7DAYS-PROG-US
www.meitavtec.com |
[email protected]
2-3
On-Off Thermostats - Programmable
ETN-24-SUPER-PROG-US Series 24VAC, wall-mount thermostat
AC
with 5-1-1, USA-type weekly program built-in and multiple Cooling and Heating stages The ETN-24-Super-Prog-US is a stylish thermostat
COOL
well suitable for commercial and residential applications.
HEAT
It can control a large variety of HVAC systems with either Heat/Cool or Heat Pump configurations and
HP/HC
offers a selectable number of heating and cooling stages. Its 5-1-1 program, with 4 periods (Set Cool / Set Heat) per day, is easy to use and can provide 24-
ECONOMY
hour comfort as well as energy savings. Overall, the ETN-24-Super-US is an attractive, wall
PROG
mount thermostat with a large, easy to read display.
C Features y Wall-mount, 24VAC thermostat
y Set point limits- 5…30°C - adjustable
y DIP switch selectable configurations:
y External sensor- option
* Heat/Cool or Heat Pump system
y Lock – Unlock thermostat buttons
* Electric or Oil/Gas heat system
y IR remote control- option
* Heat Pump in Cool or Heat
y °C temperature scale
y 5-1-1 programmable – 4 periods per day, each with Set Heat and Set Cool
y Internal or external sensor –
+/-6°C
y 3 minutes compressor delay – DIP switch selectable
y Double Set points (Cool & Heat)
y Timer – AM/PM
y Energy saving – cost efficient, environmental friendly thermostat
Models
2-4
Wiring Cooling stages
Heating stages
ETN-24-HC11-PROG-US
1
1
ETN-24-HC22-PROG-US
2
2
ETN-24-HP21-PROG-US
1
2
ETN-24-HP32-PROG-US
2
3
ALL-INONE
ALL-INONE
ETN-24-SUPER-PROG-US
EXT. SENSOR OPTION
TIMER
DIP switch selectable
y Offset for temperature reading adjustment -
Model
LOCK OPT.
www.meitavtec.com |
[email protected]
diagram
RT04
On-Off Thermostats - Programmable
FMT-24-SUPER-PROG Flush-mount, 24VAC thermostat, 5-1-1
AC
programmable, with various selectable A/C configurations
The FMT-24-SUPER-PROG is a stylish thermostat suitable for commercial and residential applications. It can control a
HEAT
large variety of HVAC systems with either Heat/Cool or Heat Pump configurations and offers a selectable number of heating and cooling stages.
Its 5-1-1 program, with 4 periods (Set Cool/Set Heat) per day, is easy to use and can provide 24-hour comfort as well as energy savings.
Overall, the FMT-24-SUPER-PROG is an attractive thermostat with a large and easy to read display.
Features
TIMER
y Flush-mount, 24VAC thermostat
y Energy saving – cost efficient, Environmental Friendly thermostat
y DIP switch selectable configurations: * Heat/Cool or Heat Pump system
y Offset – for temperature reading adjustment
* Electric or Oil/Gas heat system
y 2 set points (Cool & Heat)
* Heat Pump in Cool or Heat
y Set point limits- password protected
y 5-1-1 programmable; 4 periods per day, each with
y External sensor- option
Set Heat and Set Cool.
y Lock – Unlock buttons function
y Auto Change-Over mode option
y IR remote control- option y AM/PM clock
Wiring diagram
Models Cooling Stages
Heating Stages
Fan Speeds
FMT-24-HC11-PROG
1
1
1
FMT-24-HC22-PROG
2
2
1
FMT-24-HP21-PROG
1
2
1
FMT-24-HP32-PROG
2
3
1
ALL-IN-ONE
ALL-IN-ONE
1
Model
FMT-24-SUPER-PROG
www.meitavtec.com |
[email protected]
2-5
On-Off Thermostats - Programmable
ETN24-HC21-PROG-ECO Wall-mount, 24VAC thermostat, with weekly
AC
program built-in and fresh air damper output
The ETN-24-HC21-PROG-ECO is a fully featured, stylish
thermostat,
suitable
for
commercial
and
residential applications. It can control a large variety of
COOL
HVAC systems with different configurations. It offers a selectable number of heating and cooling stages and a
HEAT
fresh Air Damper output - damper opens automatically
F
or manually.
The
ETN-24-HC21-PROG-ECO
is
an
attractive
thermostat with a large, easy to read display. ECONOMY
Features y 24VAC wall-mount thermostat y 2 stages of Heat and 1 stage of Cool y Adjustable Electric and Oil/Gas system y Outdoor sensor- option y Fresh Air Damper output y 5-1-1 programmable; 4 periods per day, each with Set Heat and Set Cool
Wiring diagram
2-6
www.meitavtec.com |
[email protected]
y Energy saving – cost efficient,
RT03
Environmental Friendly logic COMPRESSOR DELAY
y Offset – for temperature reading adjustment
y Freeze Protection even when thermostat is OFF
y Economy mode (set back) y °F scale, AM/PM clock
EXT. SENSOR OPTION
FREEZE PROTECT
On-Off Thermostats - Programmable
ETN24-HC21-PROG-OA 24VAC, wall-mount thermostat, with 5-1-1 USA-
AC
type weekly program built-in and fresh air damper output.
DAMPER CONTROL
The ETN-24-SUPER-PROG-OA is a fully featured, stylish thermostat suitable for industrial, commercial and residential applications. HEAT
It can control a large variety of HVAC systems with different configurations; Cool, Heat (Electric or Gas)
AUTO FAN
systems. It also offers selectable number of heating and cooling stages and Fresh Air Damper output.
ECONOMY
F
The ETN-24-SUPER-PROG-OA is an attractive, with a large, easy to read display.
RT03
Features y 24VAC, wall -mount thermostat y 2 stages of Heat and 1 stage of Cool y Electric or oil/gas system- selectable y External sensor- option y Fresh Air Damper output – 24VAC * Controlled by time ONLY (select number of minutes per ½ hour- min.= 0 min (FAD never
y Energy saving – cost efficient, environmental friendly
PROG
thermostat
y 5-1-1 programmable; 4 periods per day, each with Set Heat and Set Cool
EXT. SENSOR OPTION
y IR remote control- option (programmable) y Offset – for temperature reading adjustment y °F scale, AM/PM clock
opens), max.= 30 min (FAD is always open)
*
FAD will NOT work between 7 PM and 7 AM
Wiring diagram
www.meitavtec.com |
[email protected]
2-7
On-Off Thermostats - Programmable
ETN24-HC21-PROG-TS 24VAC, wall-mount thermostat, with 5-1-1 USA-
AC
type weekly program built-in and special damper control in Heat mode.
DAMPER CONTROL
The ETN-24-SUPER-PROG-TS is a fully featured and stylish thermostat, especially designed for two-story residential applications. Thermostat on first floor, remote sensor on second
HEAT
floor and motorized damper in duct system. In heat mode, damper closes when temperature on second floor is 2 degrees (adjustable) higher than on first floor.
AUTO FAN
This diverts all air to first floor and balances temperature throughout the house.
COMPRESSOR DELAY
Features y Wall-mount, 24VAC thermostat y 2 stages of Heat and 1 stage of Cool y Electric or oil/gas system- selectable y Remote 2nd floor temperature sensor y Power open/Spring close damper output- 24VAC (works only in Heat mode
y °F scale, AM/PM clock
ECONOMY
y Energy saving – cost efficient,
y 5-1-1 programmable; 4 periods per day,
2-8
www.meitavtec.com |
[email protected]
RT03
each with Set Heat and Set Cool
y IR remote control - option
PROG
(programmable)
y Backlight display on LCD y Offset – for temperature reading adjustment
Wiring diagram
F
environmental friendly thermostat
TIMER EXT. SENSOR OPTION
On-Off Thermostats - Programmable
CTR-24-SUPER Wall mount, 24VAC thermostat, programmable, with
AC
an extra connection for an IR for a remote control from a second location The CTR-24-SUPER thermostat offers a selectable number of heating and cooling stages for Heat Pump or Heat/Cool systems. The CTR-24-SUPER enables connection of an extra IR receiver
ECONOMY
panel for remote control from a second location. In addition, it offers an alarm output, a fault input and also indicates outdoor temperature. With built-in weekly programming (where set Cool, set Heat
AUTO CHANGE-OVER
may be programmed), the CTR-24-SUPER is a convenient, temperature control solution.
HP/HC
Features y Main supply- 24VAC
y Energy saving – cost efficient, environmental
RT03
friendly thermostat
y DIP switch selectable configurations:
y Multiple stages for Cooling and Heating –
* Heat/Cool or Heat Pump system
ALARM
up to 3 cooling stages and 3 Heating stages
* Electric or Oil/Gas heat system
y Alarm
* Heat Pump in Cool or Heat
output
–
24VAC
dry
contact,
TIMER
normally-open
* Temperature scale- °C or °F
y Fault Input– 24VAC
y 5-1-1programmable; 4 periods per day, each with Set
FAULT INPUT
y External temperature sensor- option
Heat and Set Cool
y Outdoor temperature sensor- option
y Limit Cool and Heat set-point
y Extra IR receiver panel for remote control
PROG EXT. SENSOR OPTION
Wiring diagram
Y1
Fault in (24VAC)
Y2
B/O HU W2 W1 W3
G1
FD G2
AL
AL
RC
AUX
RH
T1
C
T1
14
T0
15
T0
16
Main input 24VAC
Return air sensor
Outdoor temp. sensor
External IR receiver (option)
www.meitavtec.com |
[email protected]
2-9
On-Off Thermostats - Programmable
BDIR-24-SUPER-PROG Wall-mount, 24VAC thermostat,
AC
with 5-1-1 USA-type Weekly Program built-in, operable via Remote Control only. The BDIR-24-Super is a stylish thermostat, ideally suitable for commercial applications, as it is operable via IR remote control only. It can control a large variety of HVAC systems with either Heat/Cool or Heat Pump configurations and
HEAT
offers a selectable number of heating and cooling stages.
Its 5-1-1 program, with 4 periods (Set
Cool/Set Heat) per day, is easy to use and can provide 24-hour comfort as well as energy savings.
ECONOMY
Overall, the BDIR-24-SUPER-PROG is an attractive, wall mount thermostat with a large, easy to read display. PROG
Features y Wall-mount, 24VAC thermostat
y 5-1-1 programmable; 4 periods per day, each with Set Heat and Set Cool
y DIP switch selectable configurations: * Heat/Cool or Heat Pump system
y Operable via IR Remote Control only
* Electric or Oil/Gas heat system
y 2 set points (Cool & Heat)-
* Heat Pump in Cool or Heat
for auto-change-over
* °F or °C temperature scales
y External sensor- option
y Energy saving – cost efficient, environmental friendly thermostat
Wiring diagram
Models Cooling Stages
Heating Stages
Speeds
BDIR-24-HC11-1S
1
1
1
BDIR-24-HC22-1S
2
2
1
BDIR-24-HP21-1S
1
2
1
2
3
1
ALL-INONE
ALL-INONE
1
Model
BDIR-24-HP32-1S BDIR-24-SUPER
2-10
www.meitavtec.com |
[email protected]
EXT. SENSOR OPTION
RT04
On-Off Thermostats - Programmable - Voice & Phone
CEO-24-HC22 “Talking
Thermostat”
with
telephone
&
voice
AC
capabilities, “call-out” options and 5-1-1 weekly programmable. Perfect for controlling temperature in second home
COOL
The CEO-24-HC22 thermostat brings you the state of the art technology
in
capabilities.
It
thermostat is
the
with
perfect
telephone choice
for
and
voice
controlling
temperature in your second home, cabin, condo or office from a remote location. Want to Heat up or Cool down your vacation home before you arrive while you are on the way? Forgot to change mode and left home? Call your CEO-24-HC22 thermostat and receive verbal information on actual temperature and thermostat settings to change them. Not only that but, the CEO-24-HC22 will call you in case of an alarm situation to enable you change set point, mode or turn the system off. This unique thermostat offers also 5-1-1 weekly programming, so together with its built-in communication, alarm activation in case of reaching Cool /Heat limits and further remarkable qualities, the CEO-24-HC22 is the ultimate
RT03
thermostat to give you peace of mind! ALARM
Features y Main supply- 24VAC y Telephone communication: * thermostat calls-out to user in case of alarm situation * up to 3 numbers can be programmed to be called in case of alarm * thermostat re-dials every 2 minutes in case of busy signal * call thermostat from remote location to check or set mode and temperature
y Modes: Cool /Heat / Auto-Change-Over/ Auto-fan / Fan-On
y Economy mode – to be activated when you leave home for any period of time
y Up to 2 stages of Heat and 2 stages of Cool y Heat output- Electric or Oil/Gas jumper selectable
y Selectable system configuration-
AUTO CHANGE-OVER
ECONOMY
Heat Pump / Millivolt (dry contact)
y Internal / External sensor- jumper selectable y 4 minutes compressor delay – jumper selectable y Clock mode – 24 hours / 12 hours (AM/PM) –
TIMER
FAULT INPUT
jumper selectable
y General purpose output (e.g. boiler) – to be activated also by telephone for unlimited time
y External sensor- option y °C or °F Temperature display y Real Time Clock
PROG EXT. SENSOR OPTION
y 5-1-1 weekly program
Wiring diagram
www.meitavtec.com |
[email protected]
2-11
On-Off Thermostats - Programmable - Voice & Phone
CEM-24-SUPER “Talking Thermostat” with telephone and voice options, and 5-1-1 weekly programmable, perfect for controlling temperature in second home The CEM-24-SUPER thermostat brings you the state of the
COOL
art technology in thermostat with telephone and voice capabilities. It is the perfect choice for controlling temperature in your second home, cabin, condo or office from a remote location. Want to Heat up or Cool down your vacation home before you arrive while you are on the way? Forgot to change
AUTO FAN
mode and left home? Call your CEM-24-SUPER thermostat and receive verbal information on actual temperature and thermostat settings and command to raise or lower temperature, change mode or turn the system on or off.
HP/HC
This unique thermostat offers also 5-1-1 weekly programming, so together with its built-in telephone capability, alarm activation in case of reaching Cool /Heat limits and further remarkable qualities, the
FAULT INPUT
CEM-24-SUPER is the ultimate thermostat to give you peace of mind!
Features y Main supply- 24VAC
y Selectable system configuration-
y Telephone communication – Call thermostat and listen to information on temperature settings, or set mode and temperature from a remote location through telephone
y Alarm activated when temperature reaches preset high or low limit, or when fault input is active – indicated by red LED
y Modes: Cool /Heat /Auto-Change-Over /Auto-fan /Fan-On
y Economy mode – to be activated when you leave home for any period of time
www.meitavtec.com |
[email protected]
Fan
Compressor 1
Heat element 2
Compressor 2
Wiring diagram
2-12
y Up to 2 stages of Heat & 2 stages of Cool y Heat output- Electric or Oil/Gas - jumper selectable
y Heat Pump in Cool /Heat – jumper selectable y Internal / External sensor- jumper selectable
y 5-1-1 weekly program
ALARM
Heat-Cool / Heat Pump / Millivolt (dry contact)
y General purpose output (e.g. boiler) – to be activated also by telephone for a un/limited time
y Large, easy to read display
PROG EXT. SENSOR OPTION
On-Off Thermostats - Programmable - Voice & Phone
CEV-24-SUPER Wall-mount,
24VAC
thermostat
loudspeaker,
especially
with
designed
for
built
in
AC
visually-
impaired individuals. COOL
The CEV-24-SUPER brings the latest technology in room temperature control and is perfectly suitable for residential and commercial applications.
With voice option and built-in speakers, the CEV-24-SUPER is ideal for visually impaired individuals. Pressing the
AUTO FAN
command buttons activates the voice, which guides the user to change mode, set point, etc. Available in C° or F° scale.
ECONOMY
C With the CEV-24-SUPER, climate control becomes accessible
F
to everyone in a simple, user-friendly way.
Features y Main supply- 24VAC
y Up to 2 stages of Heat and 2 stages of Cool
y Built-in speakers and voice option- thermostat speaks to
y Selectable Heat output- Electric or Oil/Gas
user allowing him to:
TIMER
(jumper selectable)
* Turn On/Off thermostat
y Celsius or Fahrenheit temperature scale
* Verify & change mode
HP/HC
PROG
External sensor- option
* Verify & change set point
EXT. SENSOR OPTION
y Outdoor sensor- option
* Verify indoor & outdoor temp.
y Alarm indication output
* Verify time of day
y Fault input, 24VAC
y Ideal for visually-impaired individuals
y 5-1-1 weekly program
y Heat/Cool or Heat Pump - selectable y Energy Saving – cost efficient, Environmental Friendly
y Economy mode (set-back/unoccupied mode)
logic built-in
Wiring diagram
Models Model
Cool
Heat
Speeds
CEV-24-HC11
1
1
1
Heat element 1 / Heat pump
W1
CEV-24-HC22
2
2
1
Fan
G1
Compressor 1
Y1
Heat element 2
W2
Compressor 2
Y2
CEV-24-HC21 CEV-24-SUPER (all in oneHC11, HC22, HC21)
1
2
1
1 or 2
1 or 2
1
AL
Alarm indication AL AX
Fault input from system
RC
Return air sensor
0
RH
Q2 T1
C
Main input 24VAC
www.meitavtec.com |
[email protected]
2-13
2-14
www.meitavtec.com |
[email protected]
Proportional Thermostats 0-10V
ETN-24-P/PD-FC-SUPER2 Wall mount, 24VAC thermostat, for all Fan Coil
FC
Proportional valve applications. The
ETN-24-P/PD-FC-SUPER2
is
a
fully
featured,
advanced thermostat suitable for light commercial, residential or apartment systems to control a wide array COOL
of Fan Coil applications. This superior thermostat offers various configurations
HEAT
according to customer's requirements, applicable by DIP
1/2/3
switches. It suggests 2 separate proportional outputs for
SPEEDS
Cool & Heat for 4-pipe Fan Coil systems, or a single proportional output for both Cool & Heat for 2-pipe
AUTO FAN
systems. In addition, it has an option for 1, 2 or 3 fan
EXT. SENSOR OPTION
speeds as well as an option for an Auto-change-over and an external sensor. Suitable for Wholesalers to keep a
AUTO CHANGE-OVER
stock on the shelf and supply the proper configuration according to customer's specifications.
ECONOMY
All these qualities make the ETN-24-P/PD-FC-SUPER2
C
a superior, flexible solution for easy temperature control.
Features
F Wiring diagram
RT03
y Wall mount , 24VAC thermostat y 1 or 2 proportional (0-10V or 2-10) output for Cool & Heat – DIP switch selectable
y 1,2 or 3 fan speeds – DIP switch selectable y Auto-change-over mode by T2 water sensor y Auto Fan Speed y External sensor – optional y Energy saving – cost efficient, environmental friendly thermostat
y Celsius or Fahrenheit temperature scales – DIP switch selectable
y Daily, digital Timer – optimal when you are asleep or away y Set point limits y Temp Reading Offset – -5°..0..+5° y Silicon rubber buttons y IR option
www.meitavtec.com |
[email protected]
3-1
Proportional Thermostats 0-10V
ETN24-PH-FC-SUPER Wall-mount, 24VAC thermostat, with proportional output for Cool (0-10VDC), onoff output for Heat. Suitable for Cool/Heat or Cool Only applications The ETN24-PH-FC-SUPER is an advanced, energy COOL
saving thermostat suitable for light commercial, residential or apartment systems to control
HEAT
Cool/Heat or Cool Only, Fan Coil applications. This thermostat offers various configurations, either Cool/Heat/Auto, Cool/Heat/Fan, or alternatively Cool Only, all of which are selectable with 1, 2 or 3 fan speed control. For Cool/Heat applications, it allows proportional output (0-10VDC) for Cool and On/Off output for Heat, while for Cool Only, it enables only
ECONOMY
1 proportional output for Cool. In addition, it offers Economy mode for maximum energy saving. All these qualities make the ETN24-PH-FC-SUPER suitable for wholesalers, keeping a stock on the shelf and supplying the proper configuration according to customer's specifications.
Features y Fan Only
y 1 proportional output for Cool (0-10VDC) and
y Lock buttons - option
1 on-off output for Heat
y
y Modes: Cool/Heat/Auto, Cool/Heat/Fan, Cool Only
Energy saving – cost efficient, environmental friendly thermostat
y 1, 2 or 3 fan speeds + Auto speed
y Celsius or Fahrenheit temperature scales
y Economy mode
y IR option
y Window contact, normally open / normally closed –
y Set point limits - 10°..30° C (50..86°F)
DIP switch selectable
+set points for Economy mode
y Internal / external sensor – DIP switch selectable
y Temp. offset – +5°C
y Auto-fan
Models
Electric
Oil / Gas
3-2
C F LOCK OPT.
y Wall mount, 24VAC thermostat
Heater
AUTO CHANGE-OVER
Wiring diagram Mode
Fan Speed
Cool, Fan Only
1/2/3
Cool, Heat, Fan Only
1/2/3
Cool, Heat, Auto, Fan Only
1/2/3
Cool, Fan Only
1/2/3
Cool, Heat, Fan Only
1/2/3
Cool, Heat, Auto, Fan Only
1/2/3
www.meitavtec.com |
[email protected]
EXT. SENSOR OPTION
Proportional Thermostats 0-10V
FMH-24-P-1S Flush-mount 24VAC Thermostat, with 2 separate
FC
proportional outputs for Cool & Heat (0-10VDC) and 1 fan speed.
COOL
The FMH-24-P-1S is a fully featured thermostat suitable for light commercial, residential or apartment applications. It
HEAT
has 2 proportional outputs for Cool and Heat (0-10VDC) and 1 fan speed. It is a smart looking, flush mount thermostat, with a soft aesthetic shape and a large, easy to read LCD display.
Features y Flush-mount, 24VAC thermostat
y Modes: Cool / Heat / Auto / Fan
y 2 separate proportional outputs for Cool and Heat
y Temperatures Limit – optional
(0-10V or 2-10V)
y 12-h Timer (using Remote Control)
y 1 fan speed
TIMER
C
y Silicon rubber key pads
y Hand held remote control – optional y Temperature reading offset – optional ± 6°
RT03
y Large, easy to read display y Simple & friendly setting
y Energy saving – cost efficient, environmental friendly thermostat
Wiring diagram
Y 0 W 0
Proportional output for cool (0-10VDC) Proportional output for heat (0-10VDC)
R
Main Input 24VAC C G
Fan (0.5A)
www.meitavtec.com |
[email protected]
3-3
Proportional Thermostats 0-10V
FMH-24-PD-1S Flush-mount, 24VAC thermostat, with a single proportional output for both Cool and Heat
0-10V
and 1 fan speed.
OUTPUT
The FMH-24-PD-1S is a fully featured, easy to operate thermostat suitable for light commercial and residential applications. It offers 1 proportional HEAT
output for both Cool and Heat (0-10VDC or 210VDC) and 1 fan speed. It is an attractive, flush mount thermostat, with a large and easy to read display.
Features y Modes: Cool / Heat / Fan
y 1 proportional output for both Cool and Heat
y Large & easy to read display
y 0-10VDC or 2-10VDC proportional output
y Silicon rubber key pads
y 1 fan speed
y Simple & friendly setting
Wiring diagram
3-4
C
y Flush-mount, 24VAC thermostat
www.meitavtec.com |
[email protected]
Proportional Thermostats 0-10V
FMT-24-PD-3S
FC
Flush-mount, 24VAC thermostat, with a single proportional output for both Cool & Heat and 3 fan speeds. The FMT-24-PD-3S is a fully featured, stylish thermostat suitable for light commercial, residential or apartment,
COOL
2-pipe fan coil applications. It offers 1 proportional output for both Cool and Heat (0-10VDC or 2-10VDC)
HEAT
and 3 fan speeds. The FMT-24-PD-3S is a smart looking, flush mount thermostat, with a soft aesthetic shape and a large, ECONOMY
easy to read LCD.
EXT. SENSOR OPTION
Features y Flush-mount, 24VAC thermostat
y Modes: Cool /Heat /Fan Only
y 1 proportional output for both Cool and Heat
y Large & easy to read display
y 3 fan speeds + auto speed
y Silicon rubber key pads
y External sensor – optional
y Simple & friendly setting
Wiring diagram External sensor (option)
T
To R
Main Input 24VAC C HI
High
ME
Medium
LO
Low
Fan (0.5A)
Y
Proportional output for cool and heat 0-10VDC 0 W
Not in use
www.meitavtec.com |
[email protected]
3-5
Proportional Thermostats 0-10V
ETN-24-P-1S (Cool Only) Wall-mount thermostat for VAV applications, with 1 proportional output (0÷10VDC) for Cool only
FC
The ETN-24-P-1S (Cool Only) thermostat is a fully
0-10V
featured and stylish thermostat suitable for light
OUTPUT
commercial, residential or apartment applications. This thermostat has proportional output for Cool (010VDC or 2-10 VDC), large, easy to read display and a hand held remote control.
Features y Wall mount, 24VAC thermostat y 1 proportional output for Cool (0-10V or 2-10V) y External Temperature Sensor - Option y Differential - Adjustable for 0–10 VDC y Offset temperature reading - Adjustable y Energy saving – cost efficient, environmental friendly logic
Wiring diagram 0
Proportional output for cool (0-10VDC) Y T
External sensor To G
Fan (24VAC, 0.5A)
C
Main Input 24VAC R
3-6
www.meitavtec.com |
[email protected]
y Temperature limit range (10°C…30°C, 50°F…86°F)
y Two different scales: Fahrenheit or Celsius
ECONOMY
C F EXT. SENSOR OPTION
y Lock buttons option y Hand Held Remote Control – Option
LOCK OPT.
Proportional Thermostats 0-10V
TED-24-P-3S (FAN 230 VAC) Wall-mount, 24VAC thermostat, with 2 proportional
FC
outputs for Cool and Heat (0-10V) and 3 fan speeds (230VAC). The TED-24-P-3S is an attractive, fully featured thermostat suitable for light commercial, residential or apartment
COOL
applications. It has two proportional outputs for Cool and Heat and 3 fan speeds.
HEAT
All these qualities make the TED-24-P-3S the perfect solution for basic and easy climate control.
Features
ECONOMY
y Wall-mount, 24 VAC Thermostat
C
y 2 proportional outputs (0-10 VDC) for Cool & Heat y 3 fan speeds - 230 VAC outputs (using 220V feed) y External sensor – option y Energy saving – cost efficient, environmental friendly thermostat
y Simple & friendly setting
Wiring diagram External sensor (option)
T
T Y
Cool valve 0-10VDC
W
Heat valve 0-10VDC
R
Main Input 24VAC C
R C
230VAC Input (common for fan) ~ HI
Fan high
ME
Fan medium
LO
Fan low
Fan (0.5A)
www.meitavtec.com |
[email protected]
3-7
Proportional Thermostats 0-10V
TED-24-P-3S-Cool Only (FAN 230 VAC) Wall-mount, 24VAC thermostat, with 1 proportional output for Cool only (0-10V) and 3 fan speeds (230VAC) The TED-24-P-3S-Cool Only is a fully featured, easy to operate thermostat suitable for light commercial,
COOL
residential or apartment applications. It has one proportional output for Cool Only and 3 fan speed outputs, 230 VAC. It is an attractive, wall mount thermostat, with a
ECONOMY
large easy to read display.
C
Features y Wall-mount, 24VAC thermostat
y Simple & friendly setting
y 1 proportional output (0-10 VDC) for Cool
y Large, clear LCD display
y 3 fan speeds
y Energy saving – cost efficient, environmental friendly thermostat
y Fan - 230 VAC power supply y External sensor - optional
Wiring diagram External sensor (option)
T
T Y
Cool valve 0-10VDC
W R
Main Input 24VAC C
230VAC Input (common for fan) ~
3-8
HI
Fan high
ME
Fan medium
LO
Fan low
Fan (0.5A)
www.meitavtec.com |
[email protected]
R C
EXT. SENSOR OPTION
Proportional Thermostats - 3 wires
ETN-24-PM2 series Wall-mount, 24VAC thermostat with 2 separate
AC
proportional outputs for Cool & Heat (3-wire) and 1 or 3-fan speeds
COOL
The ETN-24-PM2 Series is suitable for light commercial or residential applications. It offers 2 proportional outputs (3-wire) for Cool & Heat valves and 1 speed or 3 speeds,
1/3
24VAC fan.
SPEEDS
The ETN-24-PM2 is an attractive thermostat with a large, easy to read, display.
3-WIRE OUTPUT
Features y Wall mount, 24VAC thermostat
y Auto speed
y 2 Proportional and Integral outputs (3-wire)
y Offset - ±6°C
for Cool & Heat
y Set point temp. – 10…30°C
y Adjustable Open/Close time for motor (10 to 400 seconds)
y Auto-fan y Energy saving – cost efficient, environmental
y Modes - Cool / Heat / Auto
friendly thermostat
y External / Internal sensor – DIP switch selectable
Models Model
Fan Speeds
ETN-24-PM2-1S
1
ETN-24-PM2-3S
3
Wiring diagram
www.meitavtec.com |
[email protected]
3-9
Proportional Thermostats - 3 wires
ETN-24-PMH series Wall mount, 24 VAC thermostat, for 2-pipe
FC
systems, with 1 proportional output (3-wire, 24VAC) for Cool and an on/off output for Heat
The ETN-24-PMH Series is well suited for commercial or residential applications.
HEAT
It offers 1 proportional output (3-wire, 24VAC) for Cool and an on/off output for Heat. It is suitable for 2-pipe systems only and has 1 fan speed or 3 fan speeds, 24 VAC. The ETN-24-PMH is an attractive thermostat, with a
3-WIRE OUTPUT
large, easy to read display.
Features y Wall mount – 24VAC thermostat
y Fan delay after Electric heater operation
y Adjustable Open/Close time for motor (10 to 250
y Energy saving – cost efficient, environmental friendly thermostat IR
seconds)
y 1 Proportional and Integral output (24VAC) ,
y Auto speed (only in 3 speed model)
3 wire, for Cool
y HEAT output (on/off relay) - 24 VAC y 1 or 3 fan speed control
Models Model
Fan Speeds
ETN-24-PMH-1S
1
ETN-24-PMH-3S
3
Wiring diagram
3-10
remote control option
www.meitavtec.com |
[email protected]
y Auto fan - selectable
Proportional Thermostats - 3 wires
ETN-24-P/PM-1S (Cool Only) Wall mount, 24VAC thermostat, with 0-10VDC
VAV
output for Cool and 3-wire output for damper control
0-10V OUTPUT
The ETN-24-P/PM-1S (Cool Only) thermostat is a fully featured
and
stylish
thermostat
suitable
for
light
commercial, residential or apartment applications. ECONOMY
It offers a proportional output for Cool (0-10VDC) as well as another 3-wire proportional output, ideal for dampers.
C The ETN-24-P/PM-1S (Cool Only) is an attractive, stylish
F
thermostat with a large, easy to read display and an
3-WIRE OUTPUT
optional IR remote control.
Features y Wall mount, 24VAC thermostat
y Lock buttons
y 0÷10V or 2÷10V Cool Output
y Two Temp. scales: Fahrenheit or Celsius
y 3 Wire, proportional output– Open / Close, time adjustable
y External Sensor - Option
y Differential - adjustable for 0÷10 VDC
y Offset for temperature reading adjustment
y Display for set temperature only – selectable by DIP switch
y Hand Held Remote Control – Option
RT03
position
y Energy saving – cost efficient, Environmental Friendly algorithm
Wiring diagram
www.meitavtec.com |
[email protected]
3-11
3-12
www.meitavtec.com |
[email protected]
Humidity Controllers
CHU-24-SUPER Wall-mount, 24 VAC thermostat, for controlling
AC
Temperature & Humidity, weekly programmable
The CHU-24-SUPER thermostat is a combined Temperature & Humidity controller. HEAT
It offers a selectable number of heating and cooling stages as well as an output for humidifier or de-humidifier. The
HUMIDITY
CHU-24-SUPER has a built-in humidity sensor, which allows adjustment of a Humidity Set Point.
It also offers weekly programming (where set Cool, set Heat
HP/HC
and set Humidity may be programmed) and alarm indication in case temperature or humidity limits are exceeded.
ECONOMY
ALARM
Features y Main supply- 24VAC y System configuration- Heat Pump or Heat/Cool (jumper selectable)
y Multiple stages for Cooling & Heating y Output for Humidifier or De-Humidifier (jumper selectable)- 24VAC
y Humidity sensor built-in (0-10VDC) y Adjustable Heat configuration; Electric or Oil/Gas system (jumper selectable)
y Energy
saving
–
cost
efficient,
PROG
environmental friendly thermostat
y 5-1-1 weekly program with programmable set Cool, set Heat and Set Humidity
y Re-heat function in humidity logic y Alarm output (24VAC) ̶ Indication in case temperature or humidity limits are exceeded
y Adjustable temperature set point range ̶ 5°C - 35°C
y Adjustable humidity set point range ̶ 20%-70% RH
Wiring diagram
www.meitavtec.com |
[email protected]
4-1
Humidity Controllers
ERHU-55 Wall-mount, 12VDC Humidity Controller for de-humidification only.
HUMIDITY
The ERHU-55 is a Humidity controller with a built-in humidity sensor and an output for de-humidification via a compressor. The ERHU-55 allows users to adjust Humidity Set Point and the desired fan speed. The main input and outputs are 12VDC, and therefore the ERHU-55 must be used with power supply PS102.
Features y Main supply – 12VDC
y Adjustable humidity set point
y On/Off output for De-Humidification (via compressor)
y 3 Fan speeds- manually
y Humidity sensor built-in
Wiring diagram
4-2
www.meitavtec.com |
[email protected]
adjustable
Humidity Controllers
DEH-2000
Wall-mount, 24VAC, humidity ONLY controller with Fresh Air Damper output and weekly program built-in. ECONOMY
The DEH-2000 has a built-in humidity sensor, which allows adjustment of a HUMIDITY SET POINT. It offers a
DAMPER CONTROL
humidifier and de-humidifier output (24VAC) as well as a weekly program for the operation of Fresh Air Damper.
COMPRESSOR DELAY
PROG
Features y Main supply- 24VAC y On/Off output for Humidifier- 24VAC y On/Off output for De-Humidifier- 24VAC y Output for Fresh Air Damper y Humidity sensor built-in y Display of T-ambient in °C or °F
y 5-1-1 weekly program (4 x start/stop) for Fresh Air Damper operation
y Fan always runs when ventilation occurs (FAD open), even if Fan has been set to “Off”
y Re-heat function in humidity logic y Adjustable humidity set point range- 20%-90%
y Energy saving – cost efficient, environmental friendly thermostat
Wiring diagram
www.meitavtec.com |
[email protected]
4-3
Humidity Controllers
ETN-24-P-3S-HU Wall-mount, 24VAC, temperature and humidity
AC
controller (de-humidification only), with proportional integral outputs for Cool and Heat
It offers 2 separate Proportional Integral (0-10VDC) outputs and 3 Fan Speeds; one output for Cool &
HEAT
De-Humidification and another for Heat. With inputs for external temperature and humidity sensors, the ETN-24-P-3S-HU allows the user to adjust both Temperature and Humidity set points.
C
Features y Wall mount, 24VAC thermostat
y Energy saving – cost efficient,
y 2 separate Proportional Integral (0-10VDC)
environmental friendly thermostat
y Input for external humidity sensor
outputs: * Cool and Dehumidification
(0-10VDC)
* Heat
y Humidity set point range- 40%-70% RH
y 2 adjustable set points; temperature and humidity
y Works with Meitav-tec’s GHU sensor-
y Auto-Changeover mode
combined temperature & humidity sensor
y Input for external temperature sensor
for room or duct
y Re-heat function in humidity logic (only in Auto-Changeover mode)
Wiring diagram 0 W 0 Y T To
Proportional output for Heat (0-10V) Proportional output for Cool (0-10V) External sensor (option)
HU
Humidity sensor 0 G3
High
G2
Medium
G1
Low
Fan (0.5A)
C
Main Input 24VAC R
4-4
www.meitavtec.com |
[email protected]
EXT. SENSOR OPTION
Humidity Controllers
M5003-24VAC/12VDC
AC Wall mount, 24VAC or 12VDC controller for Temperature & Humidity The M5003 thermostat is a combined Temperature & Humidity controller, available in either 24VAC or 12VDC. HEAT
The M5003 offers a selectable number of heating and cooling stages as well as 2 outputs for Humidifier and DeHumidifier. The M5003 allows adjustment of Humidity & DeHumidity set points and also offers weekly programming.
COMPRESSOR DELAY
Features y Main supply- 24VAC or 12VDC y Multiple stages for Cooling and Heating (up to 2 stages of Heat and 2 stages of Cool)
y Energy saving – cost efficient, environmental friendly controller
ECONOMY
C
y Adjustable Heat configuration; Electric or Oil/Gas system (jumper selectable)
y Output for Humidifier
PROG
y Output for De-humidifier y 2 separate set points for humidification and dehumidification
y Input for external temperature sensor y Input for external humidity sensor (0-10VDC)
y 5-1-1 weekly program with programmable temperature set point, humidity set point and de-humidity set point
y Re-heat function in humidity logic y Works with Meitav-tec’s GHU sensor- combined temperature and humidity sensor for room or
M5003-24VAC
24VAC
Fan (0.5A)
12VDC
Humidifier (0.5A)
M5003-12VDC
Heat element 2 (0.5A)
Voltage
Heat element 1 (0.5A)
Model
Compressor 1 (0.5A) (Cool / De-hum)
Models
Compressor 2 (0.5A)
duct
Wiring diagram
www.meitavtec.com |
[email protected]
4-5
Humidity Controllers
M5001-24-4X0-10VDC
Wall mount, 24VAC controller for Temperature & Humidity
The M5001-24-4X0-10VDC controller is a multi-
HEAT
purpose display controller. It offers unique flexibility
0-10V
and simplicity, allowing users proportional control of
OUTPUT
both temperature and humidity. The M5001-24-4X0-10VDC offers 4 different
ECONOMY
proportional outputs; Cool, Heat, Humidifier and De-
C
humidifier. Additional features such as wide temperature and humidity ranges, adjustable differentials and adjustable dead-zones, make the M5001-24-4X0-10VDC a truly unique and practical controller.
Features y Wall mount, 24VAC controller y Range temperature from 0°C-60°C y Range humidity from 10%-99% RH y Separate Proportional Cool & Heat outputs (0-10VDC or 2-10VDC)
y Adjustable humidity differential (0.5%3.0% RH) and dead-zone (0.5%-5.0% RH)
y Automatic operation y Works with Meitav-tec’s GHU sensorcombined temperature and humidity sensor for room or duct
y Separate Proportional Humidifier and DeHumidifier outputs (0-10VDC or 2-10VDC)
y Adjustable temperature differential (0.5°C1.5°C) and dead-zone (0.5°C-2.5°C)
Wiring diagram
4-6
www.meitavtec.com |
[email protected]
Fan Coil Stand Alone Controllers
FMH-FC-SUPER3 Flush-Mount, 230VAC or 110VAC Thermostat for all
FC
Fan Coil applications, with special input.
The FMH-FC-SUPER3 series allows users the flexibility of
COOL
having one main controller for most Fan Coil applications. It can be flush-mounted or installed directly into the Fan
HEAT
Coil, with an external sensor for the return air.
The FMH-FC-SUPER3 also offers a special input for 1 of 4 options: 1-
Auto-change over sensor, where the incoming water temperature dictates the Mode.
2-
Contact input for a remote switch, which changes the Mode of one or many thermostats linked together.
3-
Contact input for a remote switch, which activates Economy mode.
4-
Contact input to Turn OFF units.
Features y Flush-Mount, 230VAC or 110VAC, Thermostat y Can be connected to: * 4 pipe system – 2 valves * 2 pipe system – 1 valve * Fan Coil – no valve
y DIP switch control options: * Manual Cool/Heat or Auto-Change * Display for set temperatures only
y Special Input for: * Auto-change over sensor - mode is set based on temperature of the incoming water flow, ideal for 2-pipe systems.
sets the mode of one or more thermostats linked together (available only for 2-pipe systems). * Contact input to activate Economy Mode
* Fan/Auto Fan or all time Auto Fan – selectable
- unit reverts to pre-determined economy
* Internal / External sensor
set points
y Lock buttons – password protected y Set point limits – password protected y Unit ‘On’ ‘Off’ Timer’
C
* Contact input for a remote switch, which
* Contact input to turn the unit Off
y Energy
saving
–
cost
efficient,
environmental friendly thermostat
y Available in different colors
www.meitavtec.com |
[email protected]
5-1
Fan Coil Stand Alone Controllers
FMH-FC-SUPER3 Models Model
Voltage
FMH-220-FC-Super3
220VAC
FMH-110-FC-Super3
110VAC
Wiring diagram
5-2
www.meitavtec.com |
[email protected]
Fan Coil Stand Alone Controllers
FMH220-P-FC-SUPER
FC
Flush-mount, 220VAC thermostat, with 0-10V proportional outputs for Fan-Coil valves and 3 Fan speeds
COOL
The FMH220-P-FC-SUPER is a highly versatile thermostat for Fan Coil applications. With numerous configuration options,
HEAT
it is an ideal solution for wholesalers to keep on stock and supply the proper configuration according to customer's
ECONOMY
specifications.
0-10V
This superior, energy saving thermostat offers 2 proportional outputs for Cool & Heat, with a configurable,
OUTPUT
proportional opening. It also enables choosing various configuration options using DIP switches, to suit to customer's requirements. For example, seller can configure it to a 2-Pipe or a 4-Pipe application, with or without Auto-Change-Over mode, 1 or 3 fan speeds, or alternatively, internal / external sensor. Other important features, such as Economy mode, temperature offset, dead zone and set point limits are also adjustable. This versatility makes the FMH220-P-FC-SUPER the ultimate choice for comfortable, easy temperature control for AUTO CHANGE-OVER
Fan-Coil.
EXT. SENSOR OPTION
Features y Flush mount, 220VAC thermostat (available also in 110VAC model)
RT03
temp. only – DIP switch selectable
y Applicable for various Fan Coil applications: 2 pipe / 4 pipe – DIP switch selectable
y Internal / External sensor – DIP switch
TIMER
selectable
y 2 separate proportional outputs for Cool and Heat (configurable, proportional opening -0-10V)
y Hand held remote control – option
LOCK OPT.
y Timer – ideal when you are asleep or away
y Auto change over sensor or contact input – DIP switch selectable
y Adjustable set point limits - 10°…30°C y Economy mode
y 1 or 3 fan speeds – DIP switch selectable y With / without Auto-change-over mode – DIP switch selectable
y Always Auto-Fan /Auto-Fan selectable – DIP switch selectable
y Set point & room temp. display / set point
y Lock buttons – option y Offset – adjustable y Beeping pushbuttons - optional
Fan (3A)
Wiring diagram 3
2
1
L
4-Pipe configuration
N
High voltage wires
W
(or)
2-Pipe configuration
(or)
No valve – fan only Not connected
Heat valve
0 Y
Cool valve
One valve
Not connected
T2
Contact input (remote switch) or Auto-change over sensor 0
External sensor (option) T1
www.meitavtec.com |
[email protected]
5-3
Fan Coil Stand Alone Controllers
MIGA1-FC-SUPER Main Controller for Fan Coil applications, with
FC
optional hand-held remote control +IR panel, or wall or flush mount panels.
MIGA1-FC-SUPER is a main controller for various F/C applications. Together with a wall or flush mount
HEAT
thermostat panel or receiver and a remote control - this controller becomes highly attractive and an ideal 'general purpose controller'. MIGA1-FC-SUPER has a modular, user-friendly design
AUTO FAN
with various F/C applications built-in, field selectable. This modularity allows you to have one main controller for different F/C applications and suit it according to
EXT. SENSOR OPTION
customer’s needs on the spot. Meitav-tec's best seller for years – highly reliable and user friendly both for installers and customers.
FAULT INPUT
Features
TIMER
y Main Supply – 230VAC
y Auto-Fan in Heat and Fan-On in Cool /
y Various F/C application, jumper selectable:
Fan in no valves – jumper selectable
* 2 pipe systems
y 3 fan speeds
* 4 pipe systems
y Wall or flush mount thermostats –
y No valve systems
option
y Hand-Held Remote Control + IRP or
y T1 – Return Air Sensor y Auto-Change Over sensor (for 2-pipes) -
sticker panel – option
y Swing motor output - dry contact
T2<20°C – Cool, T2>20°C – Heat - Option
y Pump output – active in Cool mode
y Indoor coil sensor - T3 >30°C – Fan starts
y Timer – Start/Stop, programmable
T3< 27°C Fan stops - Option
y Fault input, dry contact – when contact opens, unit
from R.Control
5-4
www.meitavtec.com |
[email protected]
Indoor coil sensor
Auto change over sensor
Return air sensor
Cool (1A)
Swing motor Output (dry contact)
Low
Medium
High
External fan (3A)
Wiring diagram
Heat (1A)
turns off and warning, indications lights will flash
C RT03
Accessories for MIGA1
ETN-MIGA-IR
FC User interface for MIGA1 main board, with IR option
AC
The ETN-MIG-IR is a convenient user-interface for the MIGA1 main board. It is a wall mount, local control panel with an infra-red receiver option, making it ideal for any end-user. The ETN-MIG-IR is a smart looking thermostat panel with a
ECONOMY
soft aesthetic shape and a large, easy to read LCD display. TIMER
RT03
Features y Easy connection to MIGA1 main board (3 wires only!) y Local Control of:
y Energy Saving – cost efficient, Environmental Friendly logic
* ON/OFF
y Large, easy to read display
* Mode
y Soft, silicon pushbuttons
* Fan Speed
*
ON/OFF Timer
y Neutral, aesthetic color
Wiring diagram
www.meitavtec.com |
[email protected]
5-5
Accessories for MIGA1
FMH-MIGA-IR Flush mount, thermostat panel, serving as a user interface for Meitav-tec's MIGA1 main board, with an IR receiver option. COOL
The FMH-MIGA-IR is a flush mount, thermostat panel, functioning as a user interface for MIGA1
HEAT
main board. It is a convenient local control panel with an infrared receiver option, making it ideal for any end-user. The FMH-MIGA-IR is a smart looking thermostat with a soft aesthetic shape and a large, easy to read LCD display.
ECONOMY
Features y Flush mount, 12VDC thermostat
y 3 fan speeds + Auto
y Easy connection to MIGA1 main board (3 wire
y Temperature set point limits – 10…30°C
only!)
y Local Control of: * On/Off
y IR option y Real time clock and day
* Mode
y Large & easy to read display
* Set point temperature
y Silicon rubber key pads
* Fan Speed
y Modes: Cool / Heat /Auto /Fan only
Wiring diagram
5-6
C
www.meitavtec.com |
[email protected]
y Simple & friendly setting
Accessories for MIGA1
M1P IR Sticker Receiver Panel for MIGA1 main board The M1P is a wall mount, infrared sticker receiver panel, with a quick connector to MIGA1 main board. HEAT
It can be locally controlled via its On/Off button, or via an IR Remote Control (RT03).
TIMER
The M1P can be supplied with an 80cm extension cable RT03
Features y Easily connected to MIGA1 main board using a quick
y LED Indications:
connector
* ON/OFF
y Locally Controlled:
* Timer
* On/Off
* Power
y Remotely Controlled: * On/Off
* Heat/Cool
y Suitable for Meitav'tec's MIGA controllers
* Mode * Fan Speed * On/Off Timer
M101P Plastic Panel Receiver for MIGA1 main board COOL
The M101P is a wall mount, infra-red receiver panel, with a cable connector to MIGA1 main board. HEAT
It can be locally controlled via its On/Off button, or via an IR Remote Control (RT03).
AUTO FAN
Features y Easily connected to MIGA1 main board y Locally Controlled: * On/Off
TIMER
y Remotely Controlled: * On/Off
RT03
* Mode
y LED Indication for Fault / Alarm
* Fan Speed
y Suitable for Meitav-tec's MIGA controllers
*
Temperature set-point Auto-Fan
*
Timer
*
Real Time Clock
www.meitavtec.com |
[email protected]
5-7
Fan Coil Stand Alone Controllers
FMH-FC-SUPER4 Flush-Mount, 230VAC or 110VAC Thermostat for all Fan Coil applications, with a special contact input.
FC
The FMH-FC-SUPER4 is a highly versatile thermostat suitable for various Fan Coil applications. It can be flushmounted or installed directly into the Fan Coil, with an external sensor for the return air and water temperature. The FMH-FC-SUPER4 also offers several DIP Switch selectable options to best suit customer's needs, e.g. AutoChange-Over sensor, Soft-start for fan or a Contact Input. When the special contact input is selected, it allows 1 of 3 options: 1- Contact input for a remote switch, which changes the Mode of one or many thermostats linked. 2- Contact input for a remote switch that activates Economy mode. 3- Contact input to turn units off.
Features y Flush-Mount, 230VAC or 110VAC, Thermostat y Suitable to various Fan Coil systems: * 4 pipe system – 2 valves
y Special Contact Input (remote switch - close/ open) can be set to work in one of the following modes:
FAULT INPUT
* Mode selection – remote switch sets the mode (Cool/Heat) to one or more thermostats linked together (ideal for hotel bedrooms or offices).
* 2 pipe system – 1 valve * Fan Coil – no valve
y Modes: Cool, Heat, Auto, Fan Only
* Economy Mode - unit reverts to predefined economy set points
y 3 fan speed control + Auto y DIP switch control options: * Auto-Change-Over sensor & Fan SoftStart in Heat / Contact input * Display of set temperatures only / Display of set-point & room temp.
* Contact input to turn the unit Off
y Soft-Start logic in Heat for the Fan – adjustable delay time
y T2 soft-start in Cool & Heat – adjustable temperature to start fan
* Always Auto-Fan / Auto-Fan selectable
y Cool/Heat temp. Dead Zone setting
* With / without Auto-Change-Over mode
y Energy saving – cost efficient, environmental friendly thermostat
* Internal / External sensor
y Auto-change over sensor - mode is set based on temperature of the incoming water flow, ideal for 2-pipe systems.
y Offset - ±6°C y Lock buttons – option y Set point limits – 10°…30°C y Remote control– optional (RT03)
Wiring diagram
5-8
AUTO CHANGE-OVER
www.meitavtec.com |
[email protected]
Models Model
Voltage
FMH-220-FC-Super4
220VAC
FMH-110-FC-Super4
110VAC
EXT. SENSOR OPTION
Fan Coil Controllers
MIGA AB
FC
MIGA AB enables control of multiple fan-coil controllers, linked one to another, via a main panel. Ideal for open space applications, where all controllers need the same working parameters.
COOL
MIGA-AB controller is a smart, cost effective solution for
HEAT
multiple fan-coil control. ETN/MIGA AB master panel allows control of up to 60 MIGA controllers, which need the same working conditions. Each MIGA board controls temperature according to the orders received from the master ETN/MIGA AB, but works according to its local ambient temperature, measured by its temperature sensors.
AUTO FAN
It is, therefore, a great solution for open spaces, such as banks, large stores and similar applications where one AUTO CHANGE-OVER
set of parameters suits all fan-coil units. MIGA AB, together with a wall or flush mount panel, is a convenient, easy way to operate numerous fan coil
ECONOMY
controllers.
C
Features y Main Supply – 230VAC
y Optional panels for Master: Wall / flush-mount
y Various F/C applications, jumper selectable:
y Optional panels for slave: wall-mount, IR
y y y y y y y
* 2 pipe systems
receiver (can override the main panel command
* 4 pipe systems
(Last operation rules).
3 fan speed control
y Remote Control (RT03)
Modes: Cool, Heat, Auto, Fan Only
y Daily, Start-Stop timer (from remote control
Mode is selected from master panel to all boards
only)
Communication to other MIGA boards
y Economy T-set in Cool & Heat – adjustable
T1 – Return Air Sensor
y Offset - ±6°C
T3- Soft-Start in Heat sensor When T3 is not connected, Auto-Fan mode in Heat is active, Auto-Fan in Cool is inactive
y Condensing Pump output y Air Mixing algorithm in Heat (when set-point ≥ ambient temp.)
y DIP switch selectable options in
RT03
y Set point limits - 10°…30°C y Dead Zone, adjustable - 1…5°C y In 2-pipe systems, Aqua-Stat should be used between the valve outputs and the valve
y DIP switch selectable options in WP2500/MIG/WS panel:
ETN1000/MIGA/AB panel:
* On-Off / Start-Stop configuration
* Lock / Unlock panel buttons
* Read ambient Temp. from panel / MIGA
* On-Off / Start-Stop configuration
* T-set + T ambient Display / T-set display only
* Read ambient Temp. from panel / MIGA
* Standard work / Technician work
* T-set + T ambient Display / T-set display only * Standard work / Technician work
www.meitavtec.com |
[email protected]
5-9
Fan Coil Controllers
MIGA AB Wiring diagram
5-10
www.meitavtec.com |
[email protected]
A/C Stand Alone Controllers
MIGA1-AC-SUPER Main Controller for A/C applications, with optional
AC
hand-held remote control +IR panel, or wall or flush mount panels.
COOL
MIGA1-AC-SUPER is a main controller for various A/C applications. Together with a wall or flush mount thermostat panel or a receiver and a remote control - this controller becomes highly attractive, an ideal 'general purpose controller'. MIGA1-AC-SUPER has a modular, user-friendly design with
AUTO FAN
various A/C applications built-in, field selectable. This modularity allows you to have one main controller for
AUTO CHANGE-OVER
different A/C applications and suit it according to customer’s needs on the spot.
HP/HC
Features
TIMER
y Main controller for multi AC applications
y 3 Fan speeds and Auto Speed
y Main Input- 230VAC
y Auto Fan – selectable
y Jumper selectable applications
y External fan output – option y Wall or Flush mount thermostats, Sticker Panel
* Heat Pump (reversible)
C EXT. SENSOR OPTION
or IRP - option
* Heat-Cool
y External sensor – option
y IR remote control - option
y Return air sensor (T1)
y Timer – Start/Stop, programmable by remote
y Outdoor coil sensor (T2) option –in Heat mode, de-
control
y C° temperature display
icing
y Indoor coil sensor (T3) option – in Cool mode, de-icing
Low
Medium
High
External fan (3A)
Heat element / Heat pump (1A)
Compressor (1A)
Wiring diagram
www.meitavtec.com |
[email protected]
6-1
Maxinet – Thermostat Network
MCU Master Control Unit for stand alone applications or Maxinet Router for up to 60 thermostats
The MCU is a Master Control Unit for stand-alone applications to control up to 60 thermostats or software applications. It is also applicable as a router for large
PROG
network applications in Maxinet B.M.S., or just for simple divisions in installations such as floors or large buildings.
ECONOMY
The MCU has an emergency weekly program that is
C F
activated automatically when the software is down. In addition, the MCU has a large display and pushbuttons to view and change units in the network. It allows broadcasting commands to all the units with a push of a button.
Overall, the MCU offers features and solutions for the modern HVAC BMS market.
Features y View and change units in the network y Easy to change each unit settings: * Mode
y Emergency Weekly Program (EWP) , automatically activated when software is down
y Weekly program for 7 days, with 2 times start-stop
* Fan speeds
time and set for each period when working as stand
* Set temperature
alone master
* Set temperature limit * On/Off
y Energy Saving – cost efficient, Environmental Friendly built-in logic
y Connect up to 12 MCUs to one Maxinet software y DIP switch selection for stand alone or software application
www.meitavtec.com |
[email protected]
7-1
Maxinet-Thermostat Network
ETN-C-24-SUPER-Maxinet protocol Wall mount, 24VAC thermostat for MaxiNet
AC
BMS system The ETN-C-24-Super is an attractive thermostat for
COOL
easy HVAC control with MaxiNet BMS system. Having most A/C applications built-in, field selectable and offering several stages of Cool and Heat and, the ETN-C-24-Super is suitable for either Heat/Cool or Heat Pump systems.
B.M.S
This flexibility, together with built in Maxinet protocol
COMPATIBLE
and energy saving algorithm make the ETN-C-24Super an easy, cost-effective solution for networking in small to medium sized BMS.
C F
Features y Wall mount, 24 VAC thermostat
y Up to 3 stages for Heat & 2 stages for Cool
y DIP switch selectable applications:
y External sensor- option
* Heat/Cool or Heat Pump
COMPRESSOR DELAY
y Selectable temperature scale - °C or °F
* Electric Heat or Oil/Gas
HP/HC
y Set Point limits- 10…30°C, 50…86°F
* Heat Pump in Heat or Heat Pump in Cool x MAC address configuration via DIP switches
y Economy mode
x MaxiNet Communication Built in
y Easy to install and use
EXT. SENSOR OPTION
Wiring diagram
Models Model
ECONOMY
Heating Stages
Cooling Stages
Speeds G
ETN-C-24-HC11-1S
1
1
1
ETN-C-24-HC22-1S
2
2
1
ETN-C-24-HP11-1S
1
1
1
ETN-C-24-HP21-1S
2
1
1
ETN-C-24-HP32-1S
3
2
1
Fan (0.5A)
A
Communication (Maxinet) B
T
External sensor (option) To W2 B/O
Heat element 2 / Heat pump (0.5A)
W1
Heat element 1 (0.5A)
Y2
Compressor 2 (0.5A)
Y1
Compressor 1 (0.5A)
C
Main Input 24VAC R
7-2
www.meitavtec.com |
[email protected]
MaxiNet-Thermostat Network
PS1800-AC-SUPER - MaxiNet protocol Main Controller for A/C in Building Management
B.M.S
System (BMS) application, with Maxinet protocol
COMPATIBLE
The PS1800-AC-SUPER is a main controller, with COMM
MaxiNet Protocol, for A/C MaxiNet BMS applications. It
AC
has a modular, user-friendly design with various A/C applications built-in, field selectable. This modularity allows you to have one main controller for different A/C applications and suit it according to customer’s needs
COOL
on the spot. The
PS1800-AC-SUPER
also
offers
cost
efficient
HEAT
capabilities, such as, occupancy sensor, cooling stages and smart algorithm for maximum energy saving. The PS1800-AC-SUPER is factory pre-programmed to save
valued
time
on
field
programming.
Please note the PS-1800 is also available as a CTU-1800, with additional advanced features. HP/HC
Features y Main controller for multi AC applications y Main Input- 230VAC y Outputs may be 230VAC or any other according to the phase input (WET terminology)
y User Selectable applications: * Heat/Cool or Heat Pump (HC/HP) * Electric Heat or Oil/Gas * Heat Pump in Heat or Heat Pump in Cool
y Up to 3 stages of Heat and 2 stages of Cool y 3.5 minute delay for compressor - Jumper selectable y 1 or 3 fan speed control - Jumper selectable y 3 x Temperature sensor inputs: * T1 sensor - Return Air sensor * T2 sensor - Outdoor sensor for Deicing in heat mode, or Overheat protection in cool mode * T3 sensor - Indoor sensor for Deicing in cool mode, or Overheat protection in heat mode
y 3 x Fault input, dry contact, voltage-free, Normally Closed: * Fault 1 – for indication through protocol
y Occupancy Sensor input- 12VDC supply
AUTO CHANGE-OVER
* Normally Closed input, Active when open * Work options – Off / Economy Set point
COMPRESSOR DELAY
y Economy set-point – adjustable y Time IR sensor starts its work options - adjustable y Window Contact input – (F2)
ECONOMY
EXT. SENSOR OPTION
* Turn Off all outputs when open
y Flow Sensor input – (F3) * Normally Closed input, Active when open * When open, compressor & heating outputs
FAULT INPUT
C F
turn off
y Celsius or Fahrenheit temperature display
RT03
y Ambient Temperature reading from panel or from main board - selectable
y Wall or flush mount panels available y Lock pushbuttons - option y Offset for temperature reading – through room panel
y Set point limits - 10°…30°C , 50…86 oF
* Fault 2 - for Window contact (N.C.)
y Dead Zone, adjustable - 0…5°C , 0…12 oF
* Fault 3 – for Flow sensor
y Offset - ±6°C adjustable
www.meitavtec.com |
[email protected]
7-3
Configurations Main Panel
PS1800-AC-SUPER
OR
TS-01 sensor only (No Panel)
OR
IRP-X500-02
OR
FMH-X500-02
Control Panels/Accessories
Wiring diagram
7-4
www.meitavtec.com |
[email protected]
ETN-X500-02
Maxinet-Thermostat Network
PS1800-FC-SUPER - Maxinet protocol Main Controller for Fan-Coil in B.M.S. (Building Management
System)
applications,
with
Maxinet Protocol The PS1800-FC-SUPER is a main controller, with Maxinet Protocol, for Fan Coil applications, suitable for
COMM
Maxinet mini Building Management System (BMS). It has a modular, user-friendly design with various Fan Coil
applications
built-in,
field
COOL
selectable.
This modularity allows you to have one main controller
HEAT
for different Fan Coil applications and suit it according to customer’s needs on the spot. The
PS1800-FC-SUPER
also
offers
cost
efficient
capabilities, such as occupancy sensor, window contact
AUTO FAN
fault input and auto-change-over for maximum energy saving.
ECONOMY
The PS1800-FC-SUPER is factory pre-programmed to save
valued
time
on
field
programming.
AUTO CHANGE-OVER
Please note the PS-1800 is also available as a
C
CTU-1800, with additional advanced features.
FAULT INPUT
Features y Main controller for multi Fan Coil applications y Main Input- 230VAC y Applications with jumper selection:
y Energy saving – cost efficient, environmental friendly controller
y Indoor coil sensor input for Heat (soft-start)
*
2-pipe systems
y Return Air sensor
*
4-pipe systems
y 3 Speed output - 230VAC, 3Amp + Auto Speed
*
no valve system
y ON/OFF output for Cool and Heat valves y Pump output – synchronized with Cool output y Auto-change over sensor input - Mode is set based
EXT. SENSOR OPTION
RT03
y Wall and flush mount panels – option y Auto Fan – selectable y Occupancy sensor input - with 12VDC supply
on temperature of the incoming water flow, ideal for
* Normally Closed input, Active when open
2-pipe systems
* Work options – Off / Economy Set point
www.meitavtec.com |
[email protected]
7-5
7-6
www.meitavtec.com |
[email protected]
Communication Maxinet protocol
Low
Medium
High
Heat (1A)
Cool (1A)
ETN-X500
Fault 2 (indication through protocol)
Enable fan only mode
Pump output (1A)
Not in use
OR
Fault 1 (open – all outputs off)
Not in use
Not in use
FMH-X500
Not in use
Not in use
Indoor coil sensor
Not in use
OR
Not in use
Changeover sensor
Not in use
Return air sensor
Maxinet-Thermostat Network
PS1800-FC-SUPER - Maxinet protocol Configurations Main Panel
PS1800
OR
FMT-X500 IRP-X500
Control Panels/Accessories
Wiring diagram
Maxinet-Thermostat Network
PS1800-P-FC-SUPER - Maxinet protocol Main Controller for Fan-Coil in B.M.S. (Building Management
System)
applications,
with
Maxinet Protocol The PS1800-P-FC-SUPER is a main controller, with Maxinet
Protocol,
for
Fan
Coil
proportional
applications, suitable for Maxinet mini Building
COMM
Management System (B.M.S.). It has a modular, user-friendly design with various Fan Coil
applications
built-in,
field
COOL
selectable.
This modularity allows you to have one main controller
HEAT
for different Fan Coil applications and suit it according to customer’s needs on the spot. The PS1800-P-FC-SUPER also offers cost efficient capabilities, such as occupancy sensor, window contact fault input and auto-change-over for maximum energy saving.
AUTO FAN
The PS1800-P-FC-SUPER is factory pre-programmed to save
valued
time
on
field
programming.
Please note the PS-1800 is also available as a CTU-1800, with additional advanced features.
Features y Main controller for multi Fan Coil applications
y 3 Speed output - 230VAC, 3Amp + Auto Speed
y Main Input- 230VAC
y Energy saving – cost efficient, environmental
y Applications with jumper selection:
friendly controller
*
2-pipe systems
y °C or °F temperature scale – jumper selectable
*
4-pipe systems
y Wall or flush mount panels – option
*
no valve system
y Proportional outputs (0-10VDC or 2-10VDC) for Cool & Heat valves
y Condensing Pump output – synchronized with Cool output
y Auto-change over sensor input - Mode is set based on temperature of the incoming water flow, ideal for 2-pipe systems
RT03
y Auto Fan – selectable y Occupancy sensor input - with 12VDC supply y Normally Closed input, Active when open y Fault input, dry contact, voltage free for occupancy sensor, window contact or fault input
y Limit Cool/Heat set points – 10…30°C/50..86° F y Offset - -6…+6°C / -12…+12°F
y Indoor coil sensor input for Heat (soft-start) y Return Air sensor
www.meitavtec.com |
[email protected]
7-7
Maxinet-Thermostat Network
PS1800-P-FC-SUPER - Maxinet protocol Configurations Main Panel
PS1800
OR
OR
OR
IRP-X500
ETN-X500
FMH-X500 FMT-X500
Control Panels/Accessories
Wiring diagram
Fan (230VAC, 3A) Main input 230VAC
N
~
0
PR
Occupancy sensor
Y
0
0
F1
0
0
W
F2
HEAT 13
0
F3
0
12
11
F4
0
Not in use
7-8
www.meitavtec.com |
[email protected]
T1
F5
0
0
T2
F6
0
T3
0
Y
0
1
IR -12V +12V
2
3
8
Room panel (option)
7
Not in use
P1
P2
A
P3
B
Maxinet – Thermostat network
PS-1800-PM2-3S-FC-SUPER - Maxinet protocol Main
Controller
for
B.M.S
Maxinet,
Fan-Coil
B.M.S COMPATIBLE
applications, with pulse modulating outputs for Cool & Heat valves, with Maxinet protocol.
COMM
The PS-1800-PM2-3S-FC-SUPER is a main controller, with
FC
Maxinet protocol, for Fan Coil applications, suitable for Maxinet B.M.S. (Building Management System). COOL
It has a modular, user-friendly design with various Fan Coil applications built-in, field selectable. This modularity allows you to have one main controller for different Fan Coil
HEAT
applications and suit it according to customer’s needs on the
3-WIRE OUTPUT
spot. The PS-1800-PM2-3S-FC-SUPER also offers cost efficient capabilities, such as, occupancy sensor and fault inputs for maximum energy saving. The PS 1800-PM2-3S-FC-SUPER is factory pre-programmed
AUTO FAN
to save valued time for the installers on field programming. Please note the PS-1800 is also available as a CTU1800, with additional advanced features.
FAULT INPUT
EXT. SENSOR OPTION
Features y Energy saving – cost efficient, environmental
y Main Input- 230VAC
friendly controller ECONOMY
y F/C Applications - jumper selectable: * 2-pipe system
y Condensing Pump output -
* 4-pipe system
synchronized
RT03
with Cool output
y Pulse Modulating outputs (floating / 3-wire) for Cool and Heat valves - 24VAC
y Wall and flush mount thermostats- option
(opening / closing duration -
adjustable)
y Auto-change-over sensor (Mode is set based on temperature of the incoming water flow, ideal for 2-pipe systems)
y Indoor coil sensor input for Heat (soft-start)
y Fault input - dry contact, voltage-free, for occupancy sensor
y Occupancy sensor input - 12VDC supply Normally Closed, active when Open
y Set point limits - 10°…30°C y IR input
y Return Air sensor y 3 Speed output- 230VAC, 3Amp + Auto Speed feature y Auto Fan option
www.meitavtec.com |
[email protected]
7-9
Maxinet – Thermostat network
PS-1800-PM2-3S-FC-SUPER - Maxinet protocol Configurations Main Panel
PS1800
OR
OR
OR
IRP-X500
ETN-X500
FMH-X500 FMT-X500
Control Panels/Accessories
(24VAC, 2.5VA)
(24VAC, 2.5VA)
www.meitavtec.com |
[email protected]
0
F1
Indoor coil sensor 0
0
T3
F2
IR -12V +12V
0
0
Valve open/close time
F3
0
F4
0
F5
1
2
0
F6
Fault F2
PR
T2
Room panel (option)
3
8
7
A
B
Communication Maxinet protocol
Cool Valve
0
0
Enable fan only mode
Heat Valve
T1
Occupancy sensor
Fault F1
Open
Close
Common
CL1 OP1 COM COM CL2 OP2
Common
C
Open
R
Change over sensor
11
PUMP
Close
Return air sensor
Low
12
L
Not in use
13
N
24VAC input (for valves)
7-10
Medium
Main input 230VAC
Fan (230VAC, 3A)
High
Condensing pump (230VAC, 1A)
Wiring diagram
Maxinet – Thermostat network
CTU1800-PM2-3S-FC-SUPER - Maxinet protocol Main Controller for B.M.S Maxinet, Fan-Coil
B.M.S COMPATIBLE
applications , with pulse modulating outputs for Cool & Heat valves, with Maxinet protocol
COMM
The CTU1800-PM2-3S-FC-SUPER is a main controller, with Maxinet protocol, for Fan Coil applications, suitable for Maxinet B.M.S. (Building Management System). It has a modular, user-friendly design with various Fan Coil applications built-in, field selectable. This modularity allows you to have one main controller for different Fan Coil applications and suit it according to customer’s needs on the spot. The CTU 1800-PM2-3S-FC-SUPER also offers cost efficient
3-WIRE OUTPUT
capabilities, such as, occupancy sensor and fault inputs for maximum energy saving. The CTU1800-PM2-3S-FC-SUPER is factory pre-programmed to save valued time for the installers on field programming.
Features y Main Input- 230VAC y F/C Applications - jumper selectable: * 2-pipe system * 4-pipe system
y Energy saving – cost efficient, environmental
AUTO CHANGE-OVER
friendly controller
y Wall and flush mount thermostats- option y Condensing Pump output - synchronized with
EXT. SENSOR OPTION
Cool output
y Pulse Modulating outputs (floating / 3-wire) for Cool and Heat valves- 24VAC (opening/closing duration adjustable)
y Auto-change-over sensor (Mode is set based on temperature of the incoming water flow, ideal for 2-pipe systems)
ECONOMY
y Fault input - dry contact, voltage-free, for occupancy sensor
y Occupancy sensor input - 12VDC supply Normally Closed, active when Open
y Set point limits - 10°…30°C
y Indoor coil sensor input for Heat (soft-start)
y IR input
y Return Air sensor
y CE certification
y 3 Speed output- 230VAC, 3Amp + Auto Speed feature
y Modern design (functional and esthetical)
y Auto Fan option
y Connect to DIN rail
www.meitavtec.com |
[email protected]
7-11
Maxinet – Thermostat network
CTU1800-PM2-3S-FC-SUPER - Maxinet protocol Configurations
Main Panel
OR
OR
FMH-X500
OR
ETN-X500
FMT-X500
Control Panels/Accessories
Wiring diagram
7-12
www.meitavtec.com |
[email protected]
IRP-X500
Maxinet – Thermostat Network
CTU1601 - Maxinet protocol Input Output card for Maxinet system with 8
B.M.S
outputs 230V, 8 inputs dry contact and 3
COMPATIBLE
Temperature readings COMM
The CTU-1601 is an Input Output (IO) card for Maxinet
EXT. SENSOR OPTION
system. It has 8 inputs, dry contact to view the status of various devices, and 8 outputs 230V 0.5A, to manage general devices from the Maxinet software, such as: - Air compressor - Chiller - Fresh air damper - Lights - Outdoor lights - Extractors - Fans
The 8 outputs can be weekly programmed from the software very easily. In addition, the CTU-1601 offers 3 Temperature sensor inputs, enabling to see temperatures in 3 locations.
Features y 8 Digital outputs – 230 V, 0.5 A
y Works with Maxinet Software
y 8 Digital inputs – volt free – dry contact
y Easy connection to Din Rail
y 3 Temperature readings
Wiring diagram
www.meitavtec.com |
[email protected]
7-13
Maxinet-Thermostat Network
PS1600 - Maxinet protocol Output card for Maxinet system, with up to 8 outputs – dry contact
B.M.S COMPATIBLE
The PS-1600 is an output card for Maxinet mini COMM
B.M.S. system. It has 8 outputs, dry contact, to control energy consuming devices / systems, ECONOMY
connected to Maxinet system, such as:
y Air compressor y Fresh air damper y Lights y Outdoor lights y Extractors y Fans These outputs can be viewed, controlled and monitored from the Maxinet software and can also be easily weekly programmed.
Features y 8 outputs - dry contact, normally open y Up to 16 units per network y Works with Maxinet Software y 12VDC operating voltage y PS201P as power supplier
Wiring diagram
7-14
www.meitavtec.com |
[email protected]
Maxinet-Thermostat Network
PS1800-FC-SUPER-02 - Maxinet protocol Main Controller for Fan-Coil in B.M.S. (Building
B.M.S
Management System) applications, with Maxinet
COMPATIBLE
Protocol and with special 'room circulation' feature for Energy Saving.
The PS1800-FC-SUPER is a main controller, with Maxinet Protocol, for Fan Coil applications, suitable for Maxinet mini Building Management System (BMS). It has a modular, userfriendly design with various Fan Coil applications built-in, field selectable. This modularity allows you to have one main
HEAT
controller for different Fan Coil applications and suit it according to customer’s needs on the spot. Aside from cost efficient capabilities, such as Occupancy Sensor and Window Contact, the PS1800-FC-SUPER also
ECONOMY
offers additional feature for maximum energy saving, 'Air Circulation in Heat'. This function allows mixing of hot air
AUTO FAN
available in a room with cold air when heating is required. The PS1800-FC-SUPER is factory pre-programmed to save
RT03
valued time on field programming. AUTO CHANGE-OVER
Features y Main Input- 230VAC
y 3 Speed output - 230VAC, 3Amp + Auto
y Main controller for Fan Coil applications, jumper
y Wall
selectable: * 2-pipe systems * 4-pipe systems * no valve system
y ON/OFF output for Cool and Heat valves y Air mixing algorithm in Heat (room circulation)
or Flush mount panel (the PS requires X500/02 panels)
–
option
y Auto Fan – jumper selectable y Fan Only – jumper selectable y Occupancy sensor input - with 12VDC supply * Normally Closed input, Active when open * Work options – Off
y Lock panel buttons (partially or fully)
y Occupancy sensor delay time – 0-20 minutes
y Condensing Pump output – synchronized with Cool
y Cool & Heat dead zone – default 1°C,
output
range 0-5°C
y Return Air sensor
y Temp. limits – 10 - 30°C
y Auto-change over sensor input - Mode is set based on
y Offset of Ambient Temperature – ±6°C range
temperature of the incoming water flow, ideal for 2pipe systems
y Indoor
C
y Energy saving – cost efficient, environmental friendly
coil sensor input for Heat (soft-start). Temperature for Fan Soft-Start - adjustable
www.meitavtec.com |
[email protected]
7-15
7-16
www.meitavtec.com |
[email protected]
Communication Modbus protocol
Indoor coil sensor
Change over sensor
ETN-X500-02
Not in use
Return air sensor
Low
OR
Fault 6 (N/C) - for indication through software
Enable/ Disable fan only mode
FMH-X500-02
Medium
High
Heat (230VAC,1A)
Cool (230VAC,1A)
Pump Output (230VAC,1A)
OR
Fault 4 (N/C) – when open – all outputs off with no delay
Fault 3 (N/O) – for indication through software
Fault 2 (N/O) – Pump indication for indication through software
Fault 1 (N/O) – for indication through software
Maxinet-Thermostat Network
PS1800-FC-SUPER-02 - Maxinet protocol Configurations Main Panel
PS1800
OR
FMT-X500-02 IRP-X500-02
Control Panels/Accessories
Wiring diagram
Communication
PS2500-3S-FC-SUPER –BACnet Protocol Main Controller for Fan Coil, Building Management
FC
System (B.M.S.) applications, with BACnet protocol (RS-485), with outputs for Cool & Heat
B.M.S COMPATIBLE
The PS2500-FC-SUPER is a main controller for Fan coil B.M.S. applications with BACnet Protocol.
It has a modular, user-
COMM
friendly design with various F/C applications built-in, field selectable. This modularity allows you to have one main
COOL
controller for different F/C applications and suit it according to customer’s needs on the spot.
HEAT
The PS2500-FC-SUPER also offers cost efficient capabilities, such as, occupancy sensor or window contact inputs, auto-changeover and smart algorithm for maximum energy saving. The PS2500-FC-SUPER is factory pre-programmed to save
AUTO FAN
valued time on field programming. Please note the PS-2500 is also available as a CTU product with additional advanced features.
Features y Main Input- 220VAC (available also in 110VAC) y Main controller for various Fan Coil applications, jumper selectable:
y Environmental friendly & economic – with smart algorithm for maximum energy saving
y Fan Only - selectable
* 2-pipe systems
y Wall or flush mount panel- option
* 4-pipe systems
y 2 Fault inputs - dry contact, voltage-free, for
* no valve system
y On/Off output for Cool and Heat valves – 220VAC y Auto-change over sensor (Mode is set based on temperature of the incoming water flow, ideal for 2-pipe systems) - selectable
y Indoor coil sensor for Heat (soft-start) - optional y Condensing Pump output
occupancy sensor, window contact or fault input - for indication through protocol
F FAULT INPUT
RT03 EXT. SENSOR OPTION
y °T ambient reading from panel or external sensor - DIP switch selectable
y Auto-Fan / Fan-On – jumper selectable y Occupancy sensor input + 12V power supply to the sensor
y °C or °F temperature scale
y Temperature set point limits – 10…30°C
y 3 fan speeds - 220VAC, 3Amp. each- with Auto Speed
y Offset - +/-6°C
function
C
y IR input
www.meitavtec.com |
[email protected]
8-1
Communication
PS2500-3S-FC-SUPER – BACnet Protocol Configurations Main Panel
PS2500
OR
OR
OR
IRP-X500
ETN-X500
FMH-X500 FMT-X500
Control Panels/Accessories
8-2
0
Device Instance Number (DIN)
F3
0
11
F4
www.meitavtec.com |
[email protected]
0
F5
T1
0
F6
0
T2
Indoor coil sensor
Low
12
Change over sensor
Return air sensor
Medium
13
0
Y
T3
0
Occupancy sensor
IR -12V +12V
0
1
2
3
8
Room panel (option)
7
Not in use
P1
P2
P3
A
B
Communication BACnet protocol
F2
14
Not in use
0
15
Fault 2 (indication through protocol)
F1
16
Enable fan only mode
0
Heat (230VAC,1A)
PR
X1
High
0
N.O1 N.C1 X2
Cool (230VAC,1A)
~
Temperature scale
N
Not in use
Fan (230VAC, 3A)
Fault 1 (open – all outputs off)
Main input 230VAC
Pump Output (230VAC,1A)
Wiring diagram
Communication
PS2500-P-3S-FC-SUPER – BACnet Protocol Main Controller for Fan Coil in Building Management System (B.M.S.) applications, with RS-485 BACnet protocol and proportional (0-10V) outputs for the Fan-Coil valves The PS2500-P-3S-FC-SUPER is a main controller for Fan coil in B.M.S. applications with BACnet Protocol.
It has a
COOL
modular, user-friendly design with various F/C applications built-in, field selectable. This modularity allows you to have one main controller for different F/C applications and suit it according to customer’s needs on the spot. The
PS2500-P-3S-FC-SUPER
also
offers
cost
efficient
capabilities, such as, occupancy sensor or window contact inputs, auto-change-over and smart algorithm for maximum
C
energy saving. The PS 2500-P-3S-FC-SUPER is factory pre-programmed to save valued time on field programming. Please note the PS-2500 is also available as a CTU-2500,
COMM
with additional advanced features.
FAULT INPUT
Features y Main Input – 220VAC
y 3 Speeds output – 220VAC, 3Amp each –
AUTO CHANGE-OVER
with Auto Speed function
y Various F/C applications, jumper selectable: * 2-pipe systems
y Wall & flush mount panels – option
* 4-pipe systems
y Fault input dry contact, voltage-free, for
* no valve system
ECONOMY
RT03
Occupancy sensor
y Proportional outputs (0-10V or 2-10V) for the Cool and Heat valves.
y Occupancy Sensor – 12VDC supply y IR input
y T1 sensor – Return Air Sensor y T2 sensor – Auto-change over sensor (Mode is set based
y Condensing Pump output – -230VAC, 1A (active in Cool)
on temperature of the incoming water flow, ideal for 2-
y Offset
pipe systems)
y T3 sensor – Indoor coil sensor for Heat (soft-start) y Fault input, dry contact, voltage-free – Normally Closed, when
open
all
outputs
are
OFF
for
temperature
reading
–
through room panel
y Set point limits - 10°…30°C
Energy
saving – cost efficient, environmental friendly algorithms
www.meitavtec.com |
[email protected]
8-3
Communication
PS2500-P-3S-FC-SUPER – BACnet Protocol
Configurations Main Panel
PS2500
OR
OR
OR
IRP-X500
ETN-X500
FMH-X500 FMT-X500
Control Panels/Accessories
Wiring diagram
Fan (230VAC, 3A) Main input 230VAC
N
~
0
PR
Occupancy sensor
Y
0
0
F1
0
0
W
F2
HEAT 13
0
F3
0
12
11
F4
0
Device Instance Number (DIN)
8-4
www.meitavtec.com |
[email protected]
T1
F5
0
0
T2
F6
0
T3
0
Y
0
1
IR -12V +12V
2
3
8
Room panel (option)
7
Not in use
P1
P2
A
P3
B
Communication
PS2500-PM2-3S-FC-SUPER – BACnet Protocol Main Controller for Fan Coil, Building Management System (B.M.S.) applications, with RS-485 MSTP Native BACnet protocol, with 3-wire, Proportional outputs for Cool & Heat
The PS2500-PM-3S-FC-SUPER is a main controller for Fan
COOL
coil B.M.S. applications with MSTP BACnet Protocol. It has a modular, user-friendly design with various F/C applications built-in, field selectable. This modularity allows you to have one main controller for different F/C applications and suit it according to customer’s needs on the spot. The PS2500-PM-3S-FC-SUPER also offers cost efficient capabilities, such as, occupancy sensor or window contact inputs and smart algorithm for maximum energy saving. The PS 2500-PM-3S-FC-SUPER is factory pre-programmed 3-WIRE OUTPUT
to save valued time on field programming – just Plug and activate without additional settings or programming. Please note the PS-2500 is also available as a CTU-2500, with additional advanced features.
Features y Main Input- 220VAC y Various F/C Applications - jumper selectable * 2-pipe systems * 4-pipe systems * no valve system
y Proportional outputs (3-wire) for Cool & Heat valves, 24VAC with external transformer (Open/Close time adjustable through protocol)
y 3 Speeds output- 220VAC, 3Amp each- with Auto Speed function
y T1 sensor – Return Air Sensor y T2 sensor - Auto-Change Over sensor (Mode is set
y Fault input, dry contact, voltage-free - Normally Closed, when open all outputs are Off
y Fault input, dry contact, voltage-free – for indication through protocol
y Energy Saving – cost efficient, environmental friendly logic and algorithms
y Indoor coil sensor for Heat (soft-start)
COMM
y Wall or flush mount panels - optional y Fault input dry contact, voltage-free, for occupancy sensor, window contact or fault input
y Auto-Fan
based on temperature of the incoming water flow,
y IR input
ideal for 2-pipe systems)
y Set point limits - 10°…30°C
y T3 sensor - Indoor coil sensor (soft-start in Heat Mode)
RT03
y Dead zone – 0…5C°
www.meitavtec.com |
[email protected]
8-5
8-6
www.meitavtec.com |
[email protected]
Communication BACnet protocol
Fault 2 (indication through protocol)
ETN-X500
Enable fan only mode
Indoor coil sensor
FMH-X500
Change over sensor
Return air sensor
OR
Fault 1 (open – all outputs off)
Not in use
Medium
Open
OR
Low
High
Not in use
Close
Common
Common
Open
Close
Communication
PS2500-PM2-3S-FC-SUPER –BACnet Protocol Configurations Main Panel
PS2500
OR
FMT-X500 IRP-X500
Control Panels/Accessories
Wiring diagram
Communication
PS2500-TA2-3S-FC-SUPER – BACnet Protocol Main Controller for Fan Coil, Building Management System
FC
(B.M.S.) applications, with BACnet protocol (RS-485), with Thermal Actuators, proportional outputs
B.M.S COMPATIBLE
The PS2500-TA2-3S-FC-SUPER is a main controller for Thermal Actuator, proportional Fan coil B.M.S. applications with BACnet
COMM
Protocol. It has a modular, user-friendly design with various F/C applications built-in, field selectable. This modularity allows you to have one main controller for different F/C applications and suit it according to customer’s needs on the spot.
HEAT
The PS2500-TA2-3S-FC-SUPER also offers cost efficient capabilities, such as, occupancy sensor or window contact inputs, auto-changeover and smart algorithm for maximum energy saving. The PS2500-TA2-3S-FC-SUPER is factory pre-programmed to save
AUTO FAN
valued time on field programming. Please note the PS-2500 is also available as a CTU product with
AUTO CHANGE-OVER
additional advanced features. ECONOMY
Features y Main Input- 220VAC y Main controller for various Fan Coil applications, jumper selectable: * 2-pipe systems * 4-pipe systems * no valve system
y Proportional output for thermal actuators on 220VAC y Auto-change over sensor (Mode is set based on
y Environmental friendly & economic – with smart algorithm for maximum energy saving
C FAULT INPUT
y Fan Only – jumper selectable y 3 fan speeds - 220VAC, 3Amp each- with
RT03
Auto Speed function
y Wall or flush mount panels - option y °T ambient reading from panel or main board - DIP switch selectable
temperature of the incoming water flow, ideal for 2-pipe systems) - Selectable
y Discharge sensor – option (2-pipe system) y Indoor coil sensor for Heat (soft-start) y 2 Fault inputs - dry contact, voltage-free, for
y Auto-Fan or Fan-On – jumper selectable y Occupancy
sensor–option
with
12VDC
supply
y Temperature set point limits – 10…30°C
occupancy sensor, window contact or fault input - for
y Offset - +/-6°C
indication through protocol
y IR input
www.meitavtec.com |
[email protected]
8-7
8-8
www.meitavtec.com |
[email protected]
Communication BACnet protocol
Fault 2 (indication through protocol)
Enable fan only mode
ETN-X500
Fault 1 (open – all outputs off)
Indoor coil sensor
OR
Change over sensor
FMH-X500
Return air sensor
Low
Medium
High
OR
Not in use
Not in use
Not in use
Communication
PS2500-TA2-3S-FC-SUPER – BACnet Protocol Configurations Main Panel
PS2500
OR
FMT-X500 IRP-X500
Control Panels/Accessories
Wiring diagram
Communication
CTU2500-P-3S-FC-SUPER – BACnet Protocol Main Controller for Fan Coil in Building Management System (B.M.S.) applications, with RS-485 BACnet protocol and proportional (0-10V) outputs for the Fan-Coil valves The CTU2500-P-3S-FC-SUPER is a main controller for Fan coil in B.M.S. applications with BACnet Protocol. It has a modular, user-friendly design with various F/C applications built-in, field selectable. This modularity allows you to have one main controller for different F/C applications and suit it
HEAT
according to customer’s needs on the spot.
0-10V The CTU2500-P-3S-FC-SUPER also offers cost efficient capabilities, such as, occupancy sensor or window contact
OUTPUT
inputs, auto-change-over and smart algorithm for maximum energy saving. The CTU2500-P-3S-FC-SUPER is factory pre-programmed to save valued time on field programming.
C
Features y Main Input- 220VAC y F/C applications, DIP switch selectable: * 2-pipe systems * 4-pipe systems
y Proportional outputs (0-10V or 2-10V) for Cool & Heat valves.
y T1 sensor – Return Air Sensor y T2 sensor - Auto-change over sensor (Mode is set based on temperature of the incoming water flow, ideal for 2pipe systems)
y Energy saving – cost efficient, environmental friendly algorithms
y Occupancy Sensor (12VDC supply) – adjustable 0…3600 sec.
y Fan On/Auto-Fan in Cool or Heat – DIP switch y Condensing Pump output -230VAC, 1A (active in Cool)
y Offset for temperature reading - -6…+6°C through room panel
y Set point limits - 10°…30°C
y Fault (1) input, dry contact, voltage-free - Normally
y Dead Zone – 0…5°C
y Fault (2) input dry contact, voltage-free, for Occupancy Sensor
y 3 Speeds output- 220VAC, 3Amp each with Auto Speed function
y Fan Only - selectable
FAULT INPUT
selectable
y T3 sensor - Indoor coil sensor for Heat (soft-start) Closed, when open all outputs turn off
AUTO FAN
RT03
y Wall & flush mount panels, or IR panel option
y IR input y DIN rail mountable y CE certified
www.meitavtec.com |
[email protected]
8-9
Communication
CTU2500-P-3S-FC-SUPER – BACnet Protocol Configurations Main Panel
CTU2500
OR
OR
OR
IRP-X500
ETN-X500
FMH-X500 FMT-X500
Control Panels/Accessories
0
DI2 DI3
8-10
www.meitavtec.com |
[email protected]
0
12V
3
7
8
T1
0
T2
0
Out 0-10V (Cool)
Out 0-10V (Heat)
Low
DI8
12VDC supply voltage – option (30mA max)
DI6 DI7
Occupancy sensor
0
Enable fan only mode
DI4 DI5
Fault 1 (open – all outputs off)
Not in use
0
2
AO1 0 AO2
T3
0
A
B
Communication BACnet protocol
DI1
1
X1 DO1 DO2 DO3 DO4 DO5 DO6 DO7 DO8
Indoor coil sensor
V1
Change over sensor
L
Room panel (option)
Return air sensor
N
Medium
Not in use
Fan 230VAC, 3A
High
Main input 230VAC
Pump output (230VAC,1A)
Wiring diagram
Communication
PS4500-3S-FC-SUPER –Modbus RTU Protocol Main Controller for Fan Coil in Building Management
FC
System (B.M.S.) applications, with RS-485 MODBUS protocol, With on-off outputs for Cool & Heat valves
COMM
The PS4500-3S-FC-SUPER is a main controller for Fan coil B.M.S. applications with MODBUS Protocol.
It has a
COOL
modular, user-friendly design with various F/C applications built-in, field selectable. This modularity allows you to have one main controller for different F/C applications and suit it according to customer’s needs on the spot. The
PS4500-3S-FC-SUPER
also
offers
cost
efficient
capabilities, such as, occupancy sensor, fault inputs, auto-
AUTO FAN
change-over and smart algorithm for maximum energy saving.
ECONOMY
The PS4500-3S-FC-SUPER is factory pre-programmed to
FAULT INPUT
save valued time on field programming. Please note the PS-4500 is also available as a CTU-4500,
C
with additional advanced features.
AUTO CHANGE-OVER
Features y Main Input- 220VAC y Various Fan Coil applications - jumper selectable * 2-pipe systems * 4-pipe systems * no valve system
y On/Off outputs for Cool and Heat valves y 3 Speeds output- 220VAC, 3Amp each- with Auto Speed function
y T1 sensor – Return Air Sensor y T2 sensor - Auto-change over sensor (Mode is set based on temperature of the incoming water flow, ideal for
y Energy saving – cost efficient, environmental friendly controller with economic energy saving algorithms
y Fault input – N.C., for indication through protocol
y Auto-Fan operation y Wall or flush mount panels and IR receiver y Occupancy sensor input and logic with built-in 12VDC supply for the sensor
y Condensing Pump output – active in Cool operation
2-pipe systems)
y T3 sensor - Indoor coil sensor for Heat (soft-start)
y IR input
y Fault input, dry contact, voltage-free - Normally Closed, when Open all outputs are OFF
www.meitavtec.com |
[email protected]
8-11
Communication
PS4500-3S-FC-SUPER – Modbus RTU Protocol Configurations Main Panel
PS4500
OR
OR
OR
IRP-X500
ETN-X500
FMH-X500 FMT-X500
Control Panels/Accessories
Not in use
8-12
F2
0
F3
0
11
F4
www.meitavtec.com |
[email protected]
0
F5
T1
0
F6
0
T2
Indoor coil sensor
Low
12
Change over sensor
Return air sensor
Medium
13
0
Y
T3
0
Occupancy sensor
IR -12V +12V
0
1
2
3
8
Room panel (option)
7
Not in use
P1
P2
P3
A
B
Communication Modbus protocol
0
14
Not in use
F1
15
Fault 2 (indication through protocol)
0
16
Enable fan only mode
PR
X1
Heat (230VAC,1A)
0
N.O1 N.C1 X2
High
~
Cool (230VAC,1A)
N
Not in use
Fan (230VAC, 3A)
Fault 1 (open – all outputs off)
Main input 230VAC
Pump Output (230VAC,1A)
Wiring diagram
Communication
PS4500-P-3S-FC-SUPER - Modbus RTU Protocol Main Controller for Fan Coil, Building Management System (B.M.S.) applications, with Modbus protocol, and proportional outputs for Cool & Heat
The PS4500-P-3S-FC-SUPER is a main controller for Fan coil B.M.S. applications with RS-485 MODBUS Protocol. It has a
COOL
modular, user-friendly design with various F/C applications built-in, field selectable. This modularity allows you to have one main controller for different F/C applications and suit it according to customer’s needs on the spot. The
PS4500-P-3S-FC-SUPER
also
offers
cost
efficient
capabilities, such as, occupancy sensor or window contact inputs, auto-change-over and smart algorithm for maximum energy saving. The PS4500-P-3S-FC-SUPER is factory pre-programmed to save valued time on field programming.
ECONOMY
Please note the PS-4500 is also available as a CTU-4500,
FAULT INPUT
with additional advanced features.
Features y Main Input- 220VAC y Various F/C Applications, jumper selectable: * 2-pipe systems * 4-pipe systems * no valve system
y 0-10V proportional outputs for Cool & Heat y T1 sensor – Return Air Sensor y T2 sensor – Auto-change over sensor (Mode is set
COMM
y 3 Speeds output – 220VAC, 3Amp each – with Auto Speed function
y Energy Saving – cost efficient, environmental friendly algorithms
y Wall or flush mount panels and remote control
F
y Occupancy sensor – with 12VDC supply built-in
ideal for 2-pipe systems)
y Temperature reading from panel or main board –
Closed, when Open all outputs are OFF
C
y C° or F° temperature scale display
y Condensing Pump output – active only in Cool
y Fault input, dry contact, voltage-free – Normally
EXT. SENSOR OPTION
receivers available
based on temperature of the incoming water flow,
y T3 sensor – Indoor coil sensor for Heat (soft-start)
AUTO CHANGE-OVER
DIP switch selectable
y Offset for temperature reading – -6° … +6° y Set point limits - 10°…30°C
y Fault input – Normally Closed, for indication through protocol
www.meitavtec.com |
[email protected]
8-13
Communication
PS4500-P-3S-FC-SUPER - Modbus RTU Protocol Configurations Main Panel
PS4500
OR
OR
OR
IRP-X500
ETN-X500
FMH-X500 FMT-X500
Control Panels/Accessories
Wiring diagram
Fan (230VAC, 3A) Main input 230VAC
N
~
0
PR
Occupancy sensor
Y
0
0
F1
0
0
W
F2
HEAT 13
0
F3
0
12
11
F4
0
Not in use
8-14
www.meitavtec.com |
[email protected]
T1
F5
0
0
T2
F6
0
T3
0
Y
0
1
IR -12V +12V
2
3
8
Room panel (option)
7
Not in use
P1
P2
A
P3
B
Communication
PS4500-PM-3S-FC-SUPER – Modbus RTU Protocol Main Controller for Fan Coil, Building Management
FC
System (BMS) applications, with Modbus protocol (RS-485),
with
Pulse
Modulating,
proportional
B.M.S
outputs (floating) for Cool & Heat
COMPATIBLE
The PS4500-PM-3S-FC-SUPER is a main controller for Fan
COMM
coil B.M.S. applications with Modbus Protocol. It has a modular, user-friendly design with various F/C applications built-in, field selectable. This modularity allows you to have one main controller for different F/C applications and suit it
HEAT
according to customer’s needs on the spot. The PS4500-PM-3S-FC-SUPER also offers cost efficient capabilities, such as, occupancy sensor or window contact inputs, auto-change-over and smart algorithm for maximum
AUTO FAN
energy saving. The PS4500-PM-3S-FC-SUPER is factory pre-programmed to
AUTO CHANGE-OVER
save valued time on field programming. Please note the PS-4500 is also available as a CTU product
ECONOMY
with additional advanced features.
C Features y Main Input- 220VAC y Main controller for various Fan Coil applications, jumper selectable: * 2-pipe systems * 4-pipe systems * no valve system
y Proportional outputs (3-wire) for Cool and Heat valves (open/close time adjustable through protocol) - 24VAC
y Auto-change over sensor (Mode is set based on temperature of the incoming water flow, ideal for 2-pipe systems)
y Auto-change-over sensor active (for 4-pipe systems) 2 separate outputs for Cool & Heat
y Fan Only – jumper selectable
y Environmental friendly & economic – with smart algorithm for maximum energy saving
3-WIRE OUTPUT FAULT INPUT
y 3 fan speeds - 220VAC, 3Amp each- with Auto Speed function
RT03
y Indoor coil sensor for Heat (soft-start) y Wall and flush mount thermostats- option y Fault inputs, dry contact, voltage-free, for occupancy sensor, window contact or fault input - for indication through protocol
y °T ambient reading from panel or main board - DIP switch selectable
y Auto-Fan or Fan-On – jumper selectable y Occupancy sensor input
www.meitavtec.com |
[email protected]
8-15
8-16
www.meitavtec.com |
[email protected]
Communication Modbus protocol
Fault 2 (indication through protocol)
Enable fan only mode
ETN-X500
Fault 1 (open – all outputs off)
OR
Indoor coil sensor
FMH-X500
Change over sensor
Return air sensor
Low
Medium
High
Common for fan OR
Not in use
Open
Close
Common
Common
Open
Close
Communication
PS4500-PM-3S-FC-SUPER – Modbus RTU Protocol Configurations Main Panel
PS4500
OR
FMT-X500 IRP-X500
Control Panels/Accessories
Wiring diagram
Communication
PS4500-TA2-3S-FC-SUPER – Modbus RTU Protocol Main Controller for Fan Coil, Building Management System (B.M.S.) applications, with Modbus protocol (RS-485), with proportional outputs for Thermal
B.M.S
Actuators (230 VAC)
COMPATIBLE
The PS4500-TA2-3S-FC-SUPER is a main controller for Fan Coil B.M.S. applications with Modbus Protocol. It has a
COMM
modular, user-friendly design with various F/C applications built-in, field selectable. This modularity allows you to have one main controller for different F/C applications and suit it according to customer’s needs on the spot.
HEAT
The PS4500-TA2-3S-FC-SUPER also offers cost efficient capabilities, such as, occupancy sensor or window contact inputs, auto-change-over and smart algorithm for maximum energy saving.
AUTO FAN
The PS4500-TA2-3S-FC-SUPER is factory pre-programmed to save valued time on field programming.
AUTO CHANGE-OVER
Please note the PS-4500 is also available as a CTU product with additional advanced features.
ECONOMY
EXT. SENSOR OPTION
Features y Main Input- 230VAC y Main Controller for various Fan Coil applications,
y 3 Speed output- 220VAC, 3Amp each- with Auto Speed selection function
jumper selectable:
y Environmental friendly & economic – with
* 2-pipe systems
smart algorithm for maximum energy saving
* 4-pipe systems * no valve system
y Proportional output for Thermal Actuators by 230VAC (0.4 Amp.) Open/Close outputs
y T1 sensor – Return Air sensor y T2 sensor - Auto-change over sensor - Mode is set
y Wall and flush mount thermostats- optional
input
y Occupancy sensor- Normally Closed, when open for 10 minutes, all outputs off
ideal for 2-pipe systems
y F° or C° temperature scale
y T3 sensor – Indoor Coil sensor for Heat (soft-start)
3-WIRE OUTPUT
occupancy sensor, window contact or fault
y Pump output – active only in Cool
2 separate outputs for Cool & Heat
F
y Fault input dry contact, voltage-free, for
based on temperature of the incoming water flow,
y Auto-change-over logic active (for 4-pipe systems) –
C
y Fan Only – selectable y Auto-Fan feature - selectable y °T ambient reading from panel or main board – DIP switch selectable
www.meitavtec.com |
[email protected]
8-17
Communication
PS4500-TA2-3S-FC-SUPER – Modbus RTU Protocol Configurations Main Panel
PS4500
OR
OR
OR
IRP-X500
ETN-X500
FMH-X500 FMT-X500
Control Panels/Accessories
www.meitavtec.com |
[email protected]
Indoor coil sensor
Change over sensor 0
F2
IR -12V +12V
0
0
F3
0
F4
0
F5
1
2
0
F6
3
8
7
A
B
Communication Modbus protocol
Heat Valve
F1
T3
Room panel (option)
Fault 2 (indication through protocol)
0
0
0
Enable fan only mode
Cool Valve
W
PR
T2
Fault 1 (open – all outputs off)
0
0
0
Occupancy sensor
Not in use
CL1 OP1 COM COM CL2 OP2
T1
Not in use
C
Not in use
R
Y
Return air sensor
11
PUMP
Not in use
Low
12
L
Not in use
13
N
24VAC input (for valves)
8-18
Medium
Main input 230VAC
Fan (230VAC, 3A)
High
Condensing pump (230VAC, 1A)
Wiring diagram
Communication
CTU4500-P-3S-FC-SUPER – Modbus RTU Protocol Main Controller for Fan Coil in Building Management System (B.M.S.) applications, with RS-485 Modbus protocol and proportional (0-10V) outputs for the Fan-Coil valves The CTU4500-P-3S-FC-SUPER is a main controller for Fan coil in B.M.S. applications with Modbus Protocol. It has a modular, user-friendly design with various F/C applications built-in, field selectable. This modularity allows you to have one main controller for different F/C applications and suit it
HEAT
according to customer’s needs on the spot.
0-10V The CTU4500-P-3S-FC-SUPER also offers cost efficient capabilities, such as, occupancy sensor or window contact
OUTPUT
inputs, auto-change-over and smart algorithm for maximum energy saving. The CTU4500-P-3S-FC-SUPER is factory pre-programmed to save valued time on field programming.
C
Features y Main Input- 220VAC
y Fan Only - selectable
y F/C applications, DIP switch selectable:
y Energy saving – cost efficient, environmental
* 2-pipe systems * 4-pipe systems
y Proportional outputs (0-10V or 2-10V) for Cool & Heat valves.
y T1 sensor – Return Air Sensor y T2 sensor - Auto-change over sensor (Mode is set based on temperature of the incoming water flow, ideal for 2pipe systems)
y T3 sensor - Indoor coil sensor for Heat (soft-start) y Fault (1) input, dry contact, voltage-free - Normally Closed, when open all outputs turn off
y Fault (2) input dry contact, voltage-free, for Occupancy Senor
y 3 Speeds output- 220VAC, 3Amp each with Auto Speed function
friendly algorithms
y Occupancy Sensor (12VDC supply) – adjustable 0…3600 sec.
AUTO FAN
FAULT INPUT
y Fan On/Auto-Fan in Cool or Heat – DIP switch selectable
y Condensing Pump output -230VAC, 1A (active in Cool)
y Offset for temperature reading - -6…+6°C through room panel
RT03
y Set point limits - 10°…30°C y Wall & flush mount panels, or IR panel - option y IR input y DIN rail mountable y CE certified
www.meitavtec.com |
[email protected]
8-19
Communication
CTU4500-P-3S-FC-SUPER – Modbus RTU Protocol Configurations
Main Panel
CTU4500
OR
OR
OR
IRP-X500
ETN-X500
FMH-X500 FMT-X500
Control Panels/Accessories
0
DI2 DI3
8-20
0
www.meitavtec.com |
[email protected]
12V
3
T1
7
0
8
T2
Out 0-10V (Cool)
Out 0-10V (Heat)
Low
DI8
12VDC supply voltage – option (30mA max)
DI6 DI7
Occupancy sensor
0
Enable fan only mode
DI4 DI5
Fault 1 (open – all outputs off)
Not in use
0
2
AO1 0 AO2
0
T3
0
A
B
Communication Modbus protocol
DI1
1
X1 DO1 DO2 DO3 DO4 DO5 DO6 DO7 DO8
Indoor coil sensor
V1
Change over sensor
L
Room panel (option)
Return air sensor
N
Medium
Not in use
Fan 230VAC, 3A
High
Main input 230VAC
Pump output (230VAC,1A)
Wiring diagram
Communication
CTU4500-PM2-3S-FC-SUPER - Modbus RTU Protocol Main Controller for B.M.S, Fan-Coil applications, with pulse modulating outputs for Cool & Heat valves, with Modbus protocol. The CTU4500-PM2-3S-FC-SUPER is a main controller for Fan
Coil
applications,
suitable
for
B.M.S.
FC
(Building
Management System), with Modbus protocol. It has a modular, user-friendly design with various Fan Coil applications built-in, field selectable. This modularity allows you to have one main controller for different Fan Coil applications and suit it according to customer’s needs on
HEAT
the spot. The CTU4500-PM2-3S-FC-SUPER also offers cost efficient capabilities, such as, occupancy sensor and fault inputs
3-WIRE OUTPUT
for maximum energy saving. The CTU4500-PM2-3S-FC-SUPER is factory pre-programmed to save valued time for the installers on field programming. AUTO FAN
Features y Main Input- 230VAC y F/C Applications - jumper selectable: * 2-pipe system * 4-pipe system
y Pulse Modulating outputs (floating / 3-wire) for Cool and Heat valves - 24VAC (opening / closing duration 0…500 sec. - adjustable)
y Auto-change-over sensor (Mode is set based on temperature of the incoming water flow, ideal for 2pipe systems)
y Wall /flush mount / IR panels - option y Fault input - dry contact, voltage-free, for occupancy sensor
y 4 x fault input – for indication through y Occupancy sensor input (12VDC supply) Normally Closed, when Open – all outputs
y Occupancy sensor operation – adjustable – 0…60 minutes
y Return Air sensor
y Offset
y Fan On / Auto-Fan in Cool/Heat – DIP switch selectable y Energy saving – cost efficient, environmental friendly controller
ECONOMY
are off
y Set point limits - 10°…30°C
y Auto Fan – option
EXT. SENSOR OPTION
protocol
y Indoor coil sensor input for Heat (soft-start)
y 3 Speed output- 230VAC, 3Amp + Auto Speed feature
AUTO CHANGE-OVER
for
temperature
RT03
reading
–
-6…+6°C through room panel
y Dead Zone – 0…5°C y IR input y DIN rail mountable y CE certified
www.meitavtec.com |
[email protected]
8-21
Communication
CTU4500-PM2-3S-FC-SUPER - Modbus RTU Protocol Configurations
Main Panel
CTU4500
OR
OR
OR
IRP-X500
ETN-X500
FMH-X500 FMT-X500
Control Panels/Accessories
www.meitavtec.com |
[email protected]
Close
1
T1
0
T2
0
T3
0
2
A
3
B
Communication Modbus protocol
12V
Indoor coil sensor
DI8
Open
Common
0
Change over sensor
DI6 DI7
Return air sensor
0
Room panel (option)
PO1 COM PO2 PO3 COM PO4
12VDC supply voltage – option (30mA max)
DI4 DI5
Close
Common
Open
(24VAC, 2.5VA)
High
(24VAC, 2.5VA)
Occupancy sensor
0
Fault 2
DI2 DI3
Fan
0
Fault 1
DI1
Cool Valve
X1 DO1 DO2 DO3 DO4 DO5 DO6 DO7 DO8
Fault 5
V1
Fault 4
L
Fault 3
N
Not in use 8-22
Not in use
Heat Valve
Low
Main input 230VAC
Fan 230VAC, 3A Medium
Wiring diagram
7
8
Communication
FMHC220-FC-MDB03 - Modbus RTU Protocol Flush mount, 230VAC thermostat, for Fan Coil
FC
B.M.S. applications, with Modbus protocol B.M.S
The FMHC220-FC-MDB03 is a highly versatile, stand alone
COMPATIBLE
thermostat, suitable for Building Management System application,
with
Modbus
communication
protocol
– COMM
compatible with Modbus application Protocol specification V1.1b (by Modbus IDA-org). With
multiple,
selectable
COOL
modes
of
operation,
the
FMHC220-FC-MDB03 offers suitability to 2-Pipe, 4-Pipe or
HEAT
no valve Fan Coil system, electrical heating element option, and can function as either Coo/Heat or Cool Only thermostat. Using DIP switch, technician can select between applying Auto-Change-Over sensor or alternatively utilizing a contact input for Economy mode to save energy. In addition, it offers the Auto-Fan feature to work at either Cool, or Heat or at both.
ECONOMY
C
Overall, the FMHC220-FC-MDB03 offers numerous options, nonetheless setting is simple and user friendly. AUTO CHANGE-OVER
Features y Contact input changes to Economy mode or
y Flush mount, 230VAC thermostat
AUTO FAN
turns unit off (Optional)
y 2 separate outputs for Cool & Heat
y Cool Only thermostat – option
y DIP switch selectable options:
y Electrical heater - option
* Auto-Change-Over sensor or Contact input
y Disable Fan operation – option (only in Cool,
* 2-pipe or 4-pipe system
only in Heat, or in both)
* 1 or 3 fan speed control + Auto Speed
y Set point limits – 10…30°C
* With or without Auto-Change-Over mode
y 3 Auto-Fan types: * Auto-fan in Cool & Heat
* Set point & room temp. display on LCD, or set point temp. display only
* Auto-fan only in Cool
* Always Auto-fan or Auto-fan selectable
* Auto-fan only in Heat
* Internal or external temperature sensor
y Password for protected setting
y Modes: Cool/ Heat / Auto- Change-Over/ Fan Only
y Pushbutton beeper – option y Hand held remote control (RT03) - option
Wiring diagram
Indoor Fan (230VAC, 1.5A) Heat valve / Heat element (230VAC, 1A)
Main Input 230VAC
Cool valve (230VAC, 1A)
A
Communication (Modbus) B
RE HE
3
2
1
~
N
High voltage wires
T2
Contact input (remote switch) or Auto-change over sensor 0
External sensor (option) T1
www.meitavtec.com |
[email protected]
8-23
Communication
ETN-X500 Wall mount, thermostat panel, serving as a user interface
of
applicable
for
a
communicating
B.M.S
(Building
controller, Management
Systems) The ETN-X500 is a wall mount, thermostat panel,
FC
functioning as a user interface of a communicating controller. Having advanced communication capabilities, it is an ideal panel for B.M.S. applications. Temperature may be sensed either through the wall panel’s built-in temperature sensor, or through the return air sensor connected to the main board. HEAT
The ETN-X500 is a well designed room panel for Meitav-tec's communicating controllers, appreciated by architects worldwide.
AUTO FAN
Features y Wall mount panel
through the wall panel’s built-in
y Built-in communication
temperature sensor, or through the
y On /Off
return air sensor – DIP switch
y Set temperature y Modes: Cool / Heat / Auto-Change-Over/Fan Only y Auto-Fan y 3 fan speeds
Wiring diagram
8-24
y Temperature may be sensed either
www.meitavtec.com |
[email protected]
selectable
y Suitable for Meitav'tec's controllers y Silicon rubber pushbuttons y Large, easy to read display y Various panel colors available
RT03
Communication
FMH-X500 Flush mount, thermostat panel, serving as a user interface of Meitav-tec communicating controller, applicable
for
B.M.S
(Building
Management
Systems) The FMH-X500 is a flush mount, thermostat panel, functioning as a user interface of a communicating controller.
FC
Having advanced communication capabilities, it is an ideal panel for BMS applications. Temperature may be sensed either through the wall panel’s built-in temperature sensor or through the return air sensor connected to the main board. HEAT
The FMH-X500 is a smart looking thermostat with a soft
1/3
aesthetic shape and a large, easy to read LCD display
SPEEDS
Features AUTO FAN
y Flush mount, horizontally shaped panel y Built-in communication y On /Off y Set temperature y Modes: Cool / Heat / Auto-Change-Over/Fan Only
y Temperature may be sensed either through the wall panel’s built-in temperature sensor, or through the return air sensor – DIP switch selectable
y Suitable for Meitav'tec's B.M.S. communicating controllers
y Auto-Fan
y Silicon rubber pushbuttons
y 1 or 3 fan speeds
y Large, easy to read display
EXT. SENSOR OPTION
C F
y Various panel colors
Wiring diagram
www.meitavtec.com |
[email protected]
8-25
Communication
FMT-X500 Flush mount, thermostat panel, serving as a
AC
user interface of a communicating controller, applicable for B.M.S (Building Management Systems)
COOL
The FMT-X500 is a flush mount, thermostat panel, functioning as a user interface of a communicating controller. Having advanced communication capabilities, it is an ideal panel for BMS applications. Temperature may be sensed either through the wall
C F
panel’s built-in temperature sensor, or through the return air sensor connected to the main board.
COMM
Features y Flush mount, vertically shaped, panel y Built-in communication y On /Off
the wall panel’s built-in temperature sensor, or through the return air sensor – DIP switch selectable
y Set temperature
y Suitable for Meitav'tec's controllers
y Modes: Cool / Heat / Auto-Change-Over/
y Silicon rubber pushbuttons
Fan Only
y Auto-Fan y 3 fan speeds
Wiring diagram
8-26
y Temperature may be sensed either through
www.meitavtec.com |
[email protected]
y Large, easy to read display y Various panel colors
RT03
Communication
IRP-X500 + RT03 Infra Red Panel operating +IR remote Control to operate Meitav-tec's communicating controller, applicable for B.M.S. (Building Management
AC
Systems) The IRP-X500 is an Infra Red Receiving Panel operating a
FC
communicating controller. Having advanced communication capabilities, it is a perfect solution for B.M.S. applications. Temperature may be sensed either through IRP's built-in temperature sensor, or through the return air sensor connected to the main board.
HEAT
Features y Wall mount, Infra Red Panel + IR remote control y Built-in communication with controller y On /Off
y Temperature through
the
may wall
be
sensed panel’s
either built-in
temperature sensor, or through the return air sensor – jumper selectable
y Set temperature
y Suitable for Meitav'tec's controllers
y Modes: Cool / Heat / Auto-Change-Over/Fan Only
y Panel dimensions – 46 x 38 x 19 mm
RT03
y Auto-Fan y 1 or 3 fan speeds
Wiring diagram
www.meitavtec.com |
[email protected]
8-27
Communication
FMHC220-P-FC-MDB01 – Modbus RTU Protocol Flush mount, 230VAC thermostat, for Fan Coil B.M.S. applications, with proportional outputs for Cool & Heat, 3 Fan Speeds and
B.M.S
Modbus interface
COMPATIBLE
The FMHC220-P-FC-MDB01 is a distinguished, stand alone, proportional thermostat for 2-Pipe or 4-Pipe
Fan
Coil
applications.
Its
Modbus
communication protocol makes it also compatible for
Building
Management
System
COOL
(B.M.S.)
applications. HEAT
It offers modular, user friendly configuration to best suit customer’s needs. Features, such as Set Point limits, dead zone or offset are adjustable while others as internal / external sensor 1 or 3 fan speed or auto-change-over are all selectable. The FMHC220-P-FC-MDB01 is an esthetic, flush-mount thermostat which offers increased energy savings as well as comfort to the user.
SPEEDS
Features y Internal /External sensor
y 2 proportional (0-10V) outputs for Cool & Heat
y Energy
Only
y DIP switch selectable options:
saving – cost efficient, environmental friendly thermostat
y Dead zone – 0…5°C y Offset - ±6°C
* 1 or 3 fan speed
y Lock / un-lock thermostat pushbuttons
* Auto-change-over sensor or Contact input
y Pushbutton beeper - option
* With or without auto-change-over
y Programmable MAC address – 1…99
temp. display only
y Auto-Fan
Wiring diagram
www.meitavtec.com |
[email protected]
ECONOMY
C
y Set point temp. limits – 10…30°C
* 2Pipe or 4Pipe Fan Coil
* Set point & room temp. display or set-point
8-28
AUTO CHANGE-OVER
y Flush mount, 230VAC thermostat y Modes: Cool/ Heat / Auto- Change-Over/ Fan
1/3
addresses – DIP switch configurable
EXT. SENSOR OPTION
LOCK OPT.
y Fits into Gewiss box y Remote control (RT03) - optional
RT03
Communication
PS4500-AC-SUPER-02-WET – Modbus RTU Protocol Main Controller for A/C in Building Management
B.M.S
System (BMS) application, with Modbus protocol
COMPATIBLE
The PS4500-AC-SUPER-02 is a main controller, with COMM
Modbus Protocol, for A/C Modbus BMS applications. It
AC
has a modular, user-friendly design with various A/C applications built-in, field selectable. This modularity allows you to have one main controller for different A/C applications and suit it according to customer’s needs
COOL
on the spot. The PS4500-AC-SUPER-02 also offers cost efficient
HEAT
capabilities, such as, occupancy sensor, cooling stages and smart algorithm for maximum energy saving. The PS4500-AC-SUPER is factory pre-programmed to save
valued
time
on
field
programming.
Please note the PS-4500 is also available as a CTU-4500, with additional advanced features. HP/HC
Features y Main controller for multi AC applications
y Occupancy Sensor input- 12VDC supply
y Main Input- 230VAC
* Normally Closed input, Active when open
y Outputs may be 230VAC or any other according to
* Work options – Off / Economy Set point
the phase input (WET terminology)
y User Selectable applications: * Heat/Cool or Heat Pump (HC/HP)
* Turn Off all outputs when open
y Flow Sensor input – (F3) * Normally Closed input, Active when open
* Heat Pump in Heat or Heat Pump in Cool
* When open, compressor & heating outputs
y 3.5 minute delay for compressor - Jumper selectable y 1 or 3 fan speed control - Jumper selectable y 3 x Temperature sensor inputs: * T1 sensor - Return Air sensor * T2 sensor - Outdoor sensor for Deicing in heat mode, or Overheat protection in cool mode * T3 sensor - Indoor sensor for Deicing in cool mode, or Overheat protection in heat mode
y 3 x Fault input, dry contact, voltage-free, Normally Closed:
COMPRESSOR DELAY
y Window Contact input – (F2)
* Electric Heat or Oil/Gas
y Up to 3 stages of Heat and 2 stages of Cool
AUTO CHANGE-OVER
ECONOMY
EXT. SENSOR OPTION
FAULT INPUT
turn off
y Celsius or Fahrenheit temperature display y Ambient Temperature reading from panel or
C F
from main board - selectable
y Wall or flush mount panels available
RT03
y Lock pushbuttons - option y Offset for temperature reading – through room panel
y Set point limits - 10°…30°C , 50…86 oF y Dead Zone, adjustable - 0…5°C , 0…12 oF y Offset - ±6°C adjustable
* Fault 1 – for indication through protocol * Fault 2 - for Window contact (N.C.) * Fault 3 – for Flow sensor
www.meitavtec.com |
[email protected]
8-29
Communication
PS4500-AC-SUPER-02-WET – Modbus RTU Protocol Configurations Main Panel
PS4500
OR
TS-01 sensors only (no panel)
OR
IRP-X500-02
OR
FMH-X500-02
Control Panels/Accessories
Wiring diagram
8-30
www.meitavtec.com |
[email protected]
ETN-X500-02
Communication
CTU2601 - BACnet Protocol Input / Output card for BACnet communication net The CTU-2601 is an Input / Output (I/O) card for BACnet communication net, designed to control various devices from software.
0-10V OUTPUT
It has 8 inputs, dry contact to view the status of any EXT. SENSOR OPTION
device or other input connected and 8 outputs to control any device, such as: - Air compressor - Chiller - Fresh air damper - Lights - Pump - Fans The CTU-2601 also offers 3 Temperature sensor inputs in order to view temperature in different locations, 2 Analog Inputs and 2 Analog Outputs.
Features y 8 Digital Outputs – Available in either 230VAC, 110VAC
y 3 Temperature reading Inputs*
or 24VAC
(50KΩ @ 25ºC)
y 2 Analog Outputs, 0-10VDC
y Easy connection to Din Rail
y 8 Digital Inputs – voltage free – dry contact
y MAC Address selection by DIP Switches
y 2 Analog Inputs, 0-10VDC * The 3 Temperature readings inputs may be used as Digital Inputs – Dry contact as well.
T1
0
T2
0
Temp. sensor T2/ Digital Input 10
DI8
Temp. sensor T1 / Digital Input 9
0
Digital Input 8
Digital Input 7
DI6 DI7
Digital Input 6
0
Digital Input 5
DI4 DI5
Digital Input 4
Digital Input 3
0
Analog Output 2 0
AI1
0
AI2 5VDC
A
Communication BACnet protocol
DI2 DI3
Analog Input 2
0
0-10VDC
DI1
AO1 0 AO2
X1 DO1 DO2 DO3 DO4 DO5 DO6 DO7 DO8
Analog Input 1
V1
Digital Input 2
L
Digital Input 1
N
0-10VDC
Digital Outputs 1-8 230VAC, 0.5A each
Temp. sensor T3 / Digital Input 11
Main input 230VAC
Analog Output 1
Wiring diagram
T3
B
Normally Open
www.meitavtec.com |
[email protected]
8-31
Communication
CTU4601 - Modbus RTU Protocol Input
/
Output
card
for
Modbus
communication net The CTU-4601 is an Input / Output (I/O) card for Modbus communication net, designed to control various devices from B.M.S. software. EXT. SENSOR OPTION
It has 8 inputs, dry contact to view the status of any device or other input connected and 8 outputs to control any device, such as: - Air compressor
- Lights
- Chiller
- Pump
- Fresh air damper
- Outdoor Lights
The CTU-4601 also offers 3 Temperature sensor inputs in order to view temperature in different locations and 2 analog inputs.
Features y 8 Digital Outputs – Available in either
y 3 Temperature reading Inputs (50KΩ @ 25ºC) y Easy connection to Din Rail
230VAC, 110VAC or 24VAC
y 8 Digital Inputs – voltage free – dry contact
y MAC Address selection by DIP Switches
y 2 Analog Inputs, 0-10VDC
8-32
www.meitavtec.com |
[email protected]
Communication Modbus protocol
Analog Input 2
0-10VDC
Analog Input 1
Temp. sensor T3
Temp. sensor T2
Temp. sensor T1
Digital Input 8
Digital Input 7
Digital Input 6
Digital Input 5
Digital Input 4
Digital Input 3
Digital Input 2
Digital Input 1
Wiring diagram
Multi-Zone Systems
PSMZ-100/200 for Multi-Zone System 24VAC, Controller for multi-zone system
AC
controlling 4 to 7 zones
The PS-MZ 100/200 is ideal for residential, commercial or industrial applications. It is compatible with Heat/Cool or Heat Pump HVAC applications and can control up to 4
HEAT
(PS-MZ100) or 7 (PS-MZ200) different zones.
C F
One of the zones serves also as the master, and different types of thermostats can be selected as masters or zones.
HP/HC
Zones can also be programmed for on/off, ideal for times when the zone is less occupied.
The main board offers inputs for Bypass and Fresh Air dampers and 3 different temperature sensors. Other features such as Auto-Changeover mode and quick connectors from the thermostats to the main board, make this multi-zone the simplest and most efficient climate control system.
Features
PROG
y Main Input - 24VAC
y Energy saving and cost efficient system
y Controls up to 4 zones (PS-MZ100) or 7 zones
y Output for dampers- 3-wire , 24 VAC
(PS-MZ200)
y Fresh Air Dampers- 2 logics for open/close:
y Zone 1 also serves as Master (same thermostat)
1. by timer (min per hour), or
y Heat/Cool or Heat pump - Selectable
2. by temperature difference (T1-T2)
y Up to 4 stages for Heat and 2 stages for Cool y Selectable Heat output- Electric or Oil/Gas (jumper selectable)
y Modes: Cool, Heat, Auto-change Over, Fan Only – selectable through Master only
y T1 Sensor - Indoor temperature sensor- option (for Fresh Air Damper)
y T2 Sensor - Outdoor temperature sensor- option (for Fresh Air Damper)
EXT. SENSOR OPTION
y Bypass Damper (3-wire) output y Display temperature available in °C or °F – depending on model ordered
y Economy
mode
(Unoccupied
mode)
–
optional
y Zone thermostats with weekly program – optional, depending on model ordered
y Weekly Program type- (5-1-1) - 4 times Set Cool/Set Heat
y T3 Sensor - Indoor Coil sensor (freeze protection in Cool and overheat protection in Heat)
www.meitavtec.com |
[email protected]
9-1
Multi-Zone Systems
PSMZ-100/200 for Multi-Zone System Master & Zone 1 M100 Different types of thermostats can be selected for masters and zones; wall or flush mount, with C° or F° temperature display, programmable or non-programmable. Programmable controllers are ideal for times when zones are unoccupied, and is therefore energy saving and cost efficient. When thermostat functions as a Master, it Controls main system functions:
Functions of thermostat as Zone 1:
y Local Fan
y On/Off
y Local set point
y Mode (Cool, Heat, Auto, Fan Only)
y Weekly program- option depending on
y Activate or de-activate Economy Mode - Unoccupied
thermostat ordered
Mode)
y Set Fresh Air damper logic
Zone Z100 y Set local On/Off status
y Weekly program- option (depending on thermostat ordered)
y Set local set point
y Fan On / Auto Fan
Models Master & Zone model
Scale
Program.
Zone Model
Scale
Program.
ETN-M100-C
Celsius
-
ETN-Z100-F
Fahrenheit
-
ETN-M100-F
Fahrenheit
-
ETN-Z100-C
Celsius
-
ETN-M100-Prog-C
Celsius
+
ETN-Z100-F-Prog
Fahrenheit
+
ETN-M100-Prog-F
Fahrenheit
+
ETN-Z100-C-Prog
Celsius
+
Note: All Master and Zone thermostats are available in flush-mount models (FMT) as well.
Wiring diagram
9-2
www.meitavtec.com |
[email protected]
Multi-Zone Systems
PS 2007/P - Multi-Zone Control System 230VAC system
Controller with
for
multi-zone
proportional,
A/C SYSTEM
3-wire
Master M2007/E
PS-2007/P
damper outputs, to control up to 7
AC DAMPER CONTROL
zones COOL
The PS 2007/P is a simple yet extremely intelligent controller for Multi-Zone system,
ByPass Damper
ideal for small to medium scale apartments
HEAT Upto 7 Zone Dampers
and houses. HP/HC Upto 7 Zone Thermostats
3-WIRE OUTPUT
Controlling up to 7 zones, it is compatible with Heat/Cool or Heat Pump HVAC systems. The PS 2007/P offers proportional damper outputs (both for the zones and the bypass and 3 different temperature sensor inputs. With
C
a separate master to control the system parameters (ON/OFF, Mode, Fan), the PS 2007/P is an environmental EXT. SENSOR OPTION
friendly and energy saving system.
Features y Main Input - 230VAC y Controls up to 7 zones y 3 wire, proportional damper output y Selectable system configuration- Heat/Cool or Heat Pump
y Selectable Heat output- Electric or Oil/Gas (jumper selectable)
y Up to 3 stages of Heat and 2 stages of Cool y Modes: Cool, Heat, Fan Only- selectable through Master only
y T2 - Outdoor coil temperature sensor (de-frost
RT41
y T3 - Indoor coil temperature sensor (freeze protection in Cool)
y Energy saving, environmental friendly system
TIMER
ECONOMY
y Wall or flush mount thermostat for zone controller (ETN-41-P or FMH-41-P)
PROG
y Master unit with weekly program- start time/stop time
y Zone damper outputs- Proportional Integral logic (for Meitav-tec dampers only)
y Bypass damper output - proportional y Open / Close time 13-15 seconds, I=20mA
protection in Heat)
www.meitavtec.com |
[email protected]
9-3
Multi-Zone Systems
PS 2007 - Multi-Zone Control System M2007
Master Controller
Wall mount, Master Controller for Multi-zone systems (up to 7 zones)
The M2007-E Master Controller is the main controller for the main system functions.
Features y On/Off y Fan speed (Hi-Med-Low) y Modes: Cool, Heat, Fan Only y Fan On – Auto Fan y Set weekly program for all system - optional y Energy saving and cost efficient
Zone Z-2007 Zone Controller for Multi-zone systems Wall or flush mount with optional hand held remote control
Two types of controllers can be selected for zones;
y Wall-mount - ETN-41-P-IR, with hand held remote control (RT-41)
y Flush-mount - FMH-41-P-IR, with hand held remote control (RT-41)
Features y Set local On/Off status y Set local temperature set point
9-4
www.meitavtec.com |
[email protected]
Multi-Zone Systems
PS-MZ502 Multi-Zone System 24VAC, Multi-Zone and climate control system, to
AC
control up to 31 zones
FC
The PS-MZ502 is an advanced multi-zone system controlling up to 31 Zones. It is the perfect climate control system for small to medium residential, commercial or
COOL
industrial applications, enabling users to decide which rooms in their house or office will be air conditioned or
HEAT
closed. Suitable for Heat/Cool or Heat Pump applications, the
HP/HC
PS-MZ502 allows multiple stages of Cool and Heat.
1/3
The Master Unit M500 allows users to view and change
SPEEDS
zone parameters, such as local On/Off and set point. It is also used to set the main system parameters.
FAULT INPUT
Through the main board, features such as proportional Fresh Air and Bypass damper outputs are available. A special pressure sensor input exists, in order to control the bypass damper. There are also 2 different fault inputs and 3
C F
temperature sensor inputs. Overall, the PS-MZ502 multi-zone system improves occupant comfort with maximum energy saving.
EXT. SENSOR OPTION
Features y Main Input - 24VAC
y T1- Indoor temperature sensor
y Controls up to 31 zones
y T2- Outdoor temperature sensor
y Energy saving, environmental friendly system
y T3- Duct temperature sensor (freeze protection in
y Communication to Maxinet Thermostat network y Selectable system configuration- Heat/Cool or Heat Pump, 2 Pipe or 4 Pipe Fan Coil
y Display temperature available in C° or F° y 12-h Timer / 24-h Timer – DIP switch selectable y Access zones from master (set point, on/off)
y Selectable Heat output- Electric or Oil/Gas (jumper
y Master unit with weekly program- jumper selectable
y Modes: Cool, Heat, Auto-change Over, Fan Onlyselectable through Master ONLY
y Output for dampers- 3-wire, 24VAC, general purpose with P.I logic * Zone dampers- open / close time adjustable * Fresh Air Dampers- 2 logics for open/close: o by timer (min. per hour) OR o by temperature difference (T1-T2) * Bypass Damper (0-10V) output- 2 options: o by pressure (input for air pressure sensor) OR
ECONOMY
Cool, overheat protection in Heat)
y Up to 4 stages of Heat and 2 stages of Cool selectable)
AUTO CHANGE-OVER
TIMER
y Weekly Program- 7 days, 4 programs per day (start time/stop time)
y 1 or 2 fan speeds y Input for air pressure sensor- for bypass output y Compressor delay- option y Economy (Set Back) Mode available for individual zones or all the system
y F1- Fault input, normally closed, voltage free- all system OFF
y F2 - Fault input, normally closed, voltage freealarm indication on master
o by number of rooms
www.meitavtec.com |
[email protected]
9-5
Multi-Zone Systems
PS-MZ502 Multi-Zone System Master M500 Controller
Zone Z500 Controller
The Master M500 of PS-MZ502 Multi Zone system
The Zone Z500 controls the following functions:
controls main system and zone functions :
y Set local On/Off status
Main system functions
y Set local set point
y On/Off y Modes: Cool, Heat, Auto-change-over, Fan Only y Fan: Fan On – Auto Fan y Activate or de-activate Economy Mode (Unoccupied Mode)
y View main system parameters- damper status, faults, pressure, T2, T3
y Set Fresh Air damper and Bypass damper logic y Set weekly program for all system- option (7 days, 4 programs per day)
y Maxinet Networking connection - option Zone Functions
y local ON/OFF y Set point y Local temperature limits - password protected y View zone parameters- mode, set point, % open of dampers
Wiring Diagram
9-6
www.meitavtec.com |
[email protected]
y Set local temperature limits (password protected) y Adjust damper’s open/close time
Damper Control Solutions
ETN-24-AZC 24VAC damper controller, proportional, with an DAMPER CONTROL
option for a duct temperature sensor
COOL
The ETN-24-AZC is the best stand-alone damper controller with a proportional output. This thermostat can control all
HEAT
standard, general purpose dampers- (3-wire, 24VAC) and its Open / Close time is adjustable by the user.
AUTO CHANGE-OVER
The ETN-24-AZC also has a special option to connect a duct ECONOMY
temperature sensor, which senses the airflow temperature and automatically selects the mode (Auto-Change-Over).
C
Features
F
y 24VAC damper controller
y Set point limits for cooling and heating
y Proportional, 3-wire output for dampers
y Adjustable open/close time for motor
y Two different temperature scales: Fahrenheit or Celsius y External Sensor – Option y Offset for temperature reading adjustment y Energy saving – cost efficient, environmental friendly
EXT. SENSOR OPTION
(10 - 400 seconds)
y Duct sensor for Auto Change-Over mode – option
y Remote Control – RT41
thermostat
Wiring diagram
www.meitavtec.com |
[email protected]
10-1
Damper Control Solutions
FMT-24-AZC-Proportional-IR Flush mount, 24VAC thermostat for Damper control, with a proportional 3-wire output
The FMT-24-AZC is an ideal stand-alone damper
COOL
controller with a proportional floating output. This thermostat can control all standard, general purpose
HEAT
dampers- (3-wire, 24VAC), and its Open / Close time is adjustable by the user.
AUTO CHANGE-OVER
The FMT-24-AZC has also a special option to
ECONOMY
connect a duct temperature sensor, which senses the airflow temperature and automatically selects the mode (Auto-Change-Over).
3-WIRE OUTPUT
C
Features y Flush mount, 24VAC thermostat y Proportional output for dampers – 24VAC, 3-wire
y Two temperature scales: Fahrenheit or Celsius y Offset for temperature reading adjustment y Duct sensor for Auto Change-Over mode – optional
Wiring diagram
10-2
www.meitavtec.com |
[email protected]
y Energy saving – cost efficient, Environmental Friendly implemented logic
y Set point limits for cooling and heating y Adjustable open/close time for motor (10-400 seconds)
y IR Remote Control
F EXT. SENSOR OPTION
Damper Control Solutions
ETN-40P1 Wall mount, room thermostat, with IR-option for
DAMPER CONTROL
damper control, On/Off to Damper COOL
The ETN-40P1 is a wall mount, thermostat panel, functioning as a user interface for damper control.
HEAT
The ETN-40P1 is a smart looking thermostat with a soft
C
aesthetic shape and a large, easy to read LCD display
Features
AUTO CHANGE-OVER
Wiring diagram
EXT. SENSOR OPTION
y Wall mount, 12V thermostat y Control of:
RT03
* On /Off - 12V signal to damper * Set temperature
y Remote control (RT40) – optional
0
T
M- M+ 8
7
y External Temp. sensor – optional y Silicon rubber pushbuttons y Large, easy to read display y Various panel colors y Works with DA-401 dampers family
www.meitavtec.com |
[email protected]
10-3
Damper Control Solutions
FMH-40P1 Flush mount, room thermostat, with IRoption for damper control, On/Off to Damper The FMH-40P1 is a flush mount, thermostat panel, COOL
functioning as a user interface for damper control. The FMH-40P1 is a smart looking thermostat with
HEAT
a soft aesthetic shape and a large, easy to read
C
LCD display
Features y Wall mount, horizontally shaped, 12V thermostat
Wiring diagram
y Control of: * On /Off – open/close the damper * Set temperature
y Timer y Remote control (RT40) - optional y Silicon rubber pushbuttons y Large, easy to read display y Various panel colors y Works with DA-401 dampers family
IRP-401 Infra red receiver panel + IR remote Control for damper control, On/Off to Damper
DAMPER CONTROL
The IRP-401 is an Infra Red Receiving Panel for damper control. 12V operation and power to Damper.
C Features y Control of: * On /Off * Set temperature
y Suitable for Meitav-tec's dampers - DA-401 dampers family
y Dimensions – 46 x 38 x 19 mm
10-4
www.meitavtec.com |
[email protected]
RT03
Dampers
DA-401 - Stand Alone Dampers VAV
Stand-alone dampers for air flow capacity regulation and control. Available in 6",8" & 10" diameter
DAMPER CONTROL
The Stand Alone proportional dampers are the best way to obtain optimum results from today's air conditioning ducting systems. They allow you to have complete control over which rooms at home are air-conditioned or closed, and are
HEAT
thus energy saving. Dampers can be operated by two different control devices:
RT40
room thermostats, or by IR receiver with hand held remote control. Users decide on mode and set point and the damper will open or close accordingly. DA-401 dampers are available in 6”, 8” & 10” diameter.
Features y Main supply - 12VAC
y Two different control options:
y Stand alone proportional damper
* Room thermostat
y Energy saving & environmentally friendly
* Infra Red Receiver + Hand held remote control
Models Model
Diameter
DA6"-401
6"
DA8"-401
8"
DA10"-401
10"
Main input 230VAC
0
~
PS201P
Wiring diagram
7
8
7
8
Main input 230VAC
0 IR Receiver
~
12VDC
Room thermostat
PS201P
7
8
R
-
+
B
M- M+ TJ
J2 12VDC Damper motor
Application 1 – IR Receiver + Remote contrrol
TJ
J2 12VDC
M- M+
Damper motor
Application 2 – Room thermostat www.meitavtec.com |
[email protected]
10-5
Dampers
DA-24-3W Stand alone damper – DAMPER CONTROL
Air flow regulator & control
3-WIRE OUTPUT
Available in 6”, 8”, 10” diameter Damper for climate control are the best way to regulate airflow in a multi-zoned house, hotel or office building to improve efficiency and occupant comfort. Dampers allow you to have complete control over which rooms are air conditioned or closed, and are thus energy saving. Users decide on mode and set point and the damper will open or close accordingly. Dampers are available in 6”, 8” & 10” diameter.
Features y Main supply - 24V
y Damper control - via room thermostat y Energy saving & environmental friendly
y Stand alone, proportional damper
y Available in 6”, 8” and 10” diameter
y Proportional, 3 wire open /close y Damper opening/ closing duration: 8 seconds
Note: These dampers are available also with a Temperature Sensor (DA-24-3W-T series)
Open
Close
Common
COM
OP
CL
COM
DA-24-3W
10-6
Temperature sensor
Common
CL
Open
Close
Wiring diagram
OP T
DA-24-3W-T
www.meitavtec.com |
[email protected]
T
Floor Heating
FE-340-H1 Wall mount, 230VAC thermostat for Floor Heating The FE-340-H1 thermostat for floor heating elements perfectly suits commercial and residential applications. The FE-340-H1 thermostat has been specifically designed
C
for Floor Heating systems and has an output for Heat only (16Amp).
EXT. SENSOR OPTION
The FE-340-H1 is attractively designed, easy to use and is energy saving solution for Floor Heating applications.
Features y Main Supply - 230VAC y Range - 10-30°C y Output for Heat Element only- 230VAC, 16Amp y External Sensor- option (TS05 or TS06) y Offset – for temperature reading adjustment
y Energy saving – cost efficient, environmental friendly thermostat
y Large, easy to read display y Soft, silicon pushbuttons y Neutral, aesthetic color
y Fits into Standard Gewiss Box (GW24 203)
Wiring diagram
www.meitavtec.com |
[email protected]
11-1
Floor Heating
FE-340-H1-PAR Wall mount, 230VAC thermostat, for Floor Heating applications, with Overheat protection (27°C) The FE-340-H1-PAR thermostat for floor heating is
C
perfectly suitable for higher-end commercial or residential applications.
EXT. SENSOR OPTION
The FE-340-H1-PAR-45 thermostat, with an output for Heat only (16Amp), has been specifically designed for Floor Heating, parquet systems,
TIMER
where temperature mustn't exceed 27°C (Adjustable).
RT41
The FE-340-H1-PAR, with its over heat protection is a simple, yet convenient solution for floor heating systems.
Features y Main Supply - 230VAC y Output for Heat Element only- 230VAC, 16Amp y Special Floor Temperature Sensor input (T-TO) for overheat protection
y Overheat Protection- Heat output turns off if temp. reaches 27°C
y Energy saving – cost efficient, environmental friendly thermostat
y Offset – for temperature reading adjustment
y IR remote control – option y Timer operation (By Remote control) y Fits into Standard Gewiss Box (GW24 203)
Wiring diagram
11-2
www.meitavtec.com |
[email protected]
Floor Heating
FE-340-H1-PAR-45 Wall mount, 230VAC thermostat, for Floor Heating applications, with Overheat protection The FE-340-H1-PAR-45 thermostat for Floor Heating is perfectly suitable for higher-end commercial or residential
C
applications. The FE-340-H1-PAR-45 thermostat has an output for Heat
EXT. SENSOR OPTION
only (16Amp) and has been specifically designed for Floor Heating, parquet systems, where temperature cannot be allowed to exceed 45°C.
TIMER
The FE-340-H1-PAR-45, with its over heat protection is a simple, yet convenient and safe solution for floor heating
RT41
systems.
Features y Main Supply - 230VAC y Output for Heat Element only- 230VAC, 16Amp y Special Floor Temperature Sensor input (T-TO) for overheat protection
y Overheat Protection- HEAT output turns OFF if temp reaches 45°C
y Energy saving – cost efficient, environmental friendly thermostat
y Offset – for temperature reading adjustment y IR remote control – option y Timer operation (By Remote control) y Fits into Standard Gewiss Box (GW24 203)
Wiring diagram
www.meitavtec.com |
[email protected]
11-3
Floor Heating
FHV-H1-PR-IR Wall
mount,
230VAC
thermostat,
for
Floor Heating applications, with weekly programming The FHV-H1-PR-IR thermostat for floor heating is
perfectly
residential
suitable
for
applications
commercial
and
has
C
or
been EXT. SENSOR OPTION
specifically designed for Floor Heating systems. With weekly programming and external sensor option, the FHV-H1-PR-IR is a simple, yet
PROG
efficient solution for floor heating systems. TIMER
Features y Main Supply - 230VAC y Flush-mount thermostat y Output for Heat element- 230VAC, 13Amp y DIP switch selectable display – Tambient and Tset or Tset only
Wiring diagram
11-4
www.meitavtec.com |
[email protected]
y Energy saving – cost efficient, Environmental Friendly algorithms
y IR remote control – option y Weekly program (5-1-1) y Offset – for temperature reading adjustment
Floor Heating
PS8-FH + ETN-8H Multi Zone Controller (PS8-FH) + Wall-mount Thermostat (ETN-8H) for Floor Heating applications The PS8-FH + ETN-8H multi-zone controller for Floor Heating elements perfectly suits commercial or residential
C
applications. This multi-zone system consists of one main board to control up to 8 zones and a thermostat. Each zone works
ECONOMY
with two temperature sensors; ambient temperature sensor and floor temperature sensor for floor overheat protection. The user controls the zones via a wall panel, where each zone may be individually accessed. The PS8-FH + ETN-8H with overheat protection feature is ideal for parquet floors due to its overheat protection logic.
Features y Main Supply - 230VAC y Output for up to 8 Heat elements- 230VAC, 1Amp y ETN-8H- wall-mount thermostat control panel (12VDC) for up to 8 zones (output from main board)
y Output for up to 8 external temperature sensors (RS01) for ambient temperature (10°-30°C)
y Output for up to 8 temperature sensors (TS01) for floor temperature limit
y Overheat protection- unit turns off, if floor temperature limit is reached
y Floor temperature limit - DIP switch selectable (27°C, 28°C, 29°C or 30°C)
y Energy saving, environmental friendly system
Wiring diagram
www.meitavtec.com |
[email protected]
11-5
11-6
www.meitavtec.com |
[email protected]
Air Quality
GAQ - Air Quality Controller & Sensor Series Air Quality controller – wall mount, 24VAC, or 12VDC+PS + Duct / Room sensor GAQ -12/24
24VAC or 12VDC
The GAQ series are Air Quality Sensors and Controllers that automatically react to air pollution sources. They sense tobacco smoke, toilet odors, strong kitchen smells, etc. and GAQ Room Sensor
mechanically regulate ventilated areas such as cinemas, pubs, restaurants, toilets or conference rooms.
The sensor switches the fan on when air quality drops below a preset, adjustable level. The sensing head of the unit is self - cleaning, a process which occurs each time the GAQ Duct Sensor
unit is triggered. When atmosphere has returned to normal, the fan switches off.
Features Wall mount, Air Quality Controllers
Room or Duct air quality sensors
y Main supply - 24VAC or 12VDC (with PS)
y Main supply - 24VAC or 10-30VDC
y The controller has 2 outputs:
y Sensor has proportional pre-defined output
* Proportional output 0-10VDC for variable fan speed
0-10VDC
or B.M.S. applications. * Dry contact for direct fan switching (on/off) or alarm indication
y Set point for Air Quality - adjustable y Indication lights to show status of Air Quality controller (On/Off)
y Self cleaning sensor
OUTPUT 0...10V
10...30VDC
24VAC
Wiring diagram
www.meitavtec.com |
[email protected]
12-1
Air Quality
CO Detector Sensor for measuring carbon monoxide (CO) concentration SensiCO PX 300 is a reliable sensor for measuring carbon monoxide (CO) concentration in locations, such as car parks and garages. As CO, a dangerous poisonous gas, has no smell, taste or color, it is important to install SensiCO PX300, as a total protection from CO poisoning. When CO concentration exceeds 50 PPM, a signal to the ventilation system is activated and an alarm is sent to the car park management/ control. SensiCO PX 300 may be connected to a self-control system or to the B.M.S. (Building Management System), using its analog output.
Features y Approval / Certification: TÜV per VDI – 2053 (Air treatment systems for car parking)
y Detection principle: Electro-chemical
y Humidity range: 15 - 95% relative humidity, non condensating
y Operation: Continuous
y Signal: 4-20 mA, max. load 300Ω
y Gas entry: by diffusion
y Connection: 2 – wire
y Measuring range: 0-300 ppm CO in air
y Zero adjustment: Automatic, calibration free
y Reproducibility : < 3 ppm
y Sensitivity adjustment: via potentiometer
y Response time 90: < 60 sec
y R.F.I According EN 50 081-1 resp.
y Cross sensitivity: < 2% on 300 ppm CO according VDI 2053
y Linearity: < 2% on 300 ppm CO according VDI 2053
Wiring diagram
12-2
y Operating temperature range: -10°C to +40°C
www.meitavtec.com |
[email protected]
EN 50 082-2 B
y Filter: For dust and water protection
HVAC Analyzers
M4000MD HVAC Analyzer, measures inlet and outlet variables, for an intelligent analysis of HVAC performance
The M4000MD HVAC Analyzer is a diagnostic instrument for a wide range of applications. It consists of two units; a large LCD display and a hand held sensor connected by a coiled command cable. The M4000MD measures all HVAC inlet and outlet variables, allowing for an intelligent analysis of system performance. The M4000MD is an excellent tool for every HVAC technician allows readings both in Metric or English values.
Features y The M4000MD measures:
y Allows measurement of Rectangular and Round Grills
*
Temperature (°C/°F)
*
Humidity (%RH)
y Three, simple keypads operate all functions
*
Dew Point (°C/°F)
y Low Battery Indication
*
Air Velocity (FPS or M/S)
*
Air Volume (CFM or M³/S)
*
Energy Capacity in BTU/HR or KW
y Direct Read-out – no additional calculations needed
y Audible and Visual Prompts y Memory holds cumulative volume and power measurements for multi grills calculations
y 9V Battery Operated
www.meitavtec.com |
[email protected]
13-1
12-2
www.meitavtec.com |
[email protected]
Special Controllers
EC-300 230VAC, Energy Controller for energy saving in offices
AC
or hotel rooms. Turns off/on HVAC + lighting systems per presence in a room via an Occupancy Sensor and
FC
optional Contact Inputs The EC-300 is a smart Energy Controller, which offers substantial energy saving of Air Conditioning & Lighting operation in hotel bedrooms, offices or conference rooms.
ECONOMY
Since hotel bedrooms have different needs from offices
+
regarding occupancy changes, the EC-300 allows different configurations for them. In both applications, presence detection is achieved via an Infra Red Occupancy sensor; if the IR sensor detects no presence within a certain, configurable time, the EC will cut off electricity to HVAC &
Lighting systems. Upon detection, EC will automatically re-operate the systems. Further energy saving is achieved by cutting off electricity to HVAC system if someone opens the window, or if set temperature exceeds the Limit Cool or Limit Heat. For Hotels, additional Contact Input, a door switch, or other Normally Closed input is employed to stop HVAC, Lighting or both.
Features y Power supply - 230VAC, 10A for HVAC operation y Detects presence based on an IR Occupancy sensor + Contact Inputs on door entry or window
y Easy, quick installation at voltage line, between an existing HVAC & lighting system and Power Supply
y Inputs: * IR Occupancy sensor – turns off HVAC and lights after adjustable time, separate for HVAC and lights * Window contact (X2) – N.O. or N.C selectable * Door switch – enables special logic for hotel rooms * Temperature sensors – enable Temperature Limits, Cool & Heat set limits are adjustable
y EC installation requires no modification in the existing room devices
y No decline in convenience to user y Controller supplies 12VDC voltage to IR sensor
y EC set contains Controller + IR sensor y DIP switch selectable options: * Hotel or Office configuration (Door switch active or not for logic) * With or without compressor delay * Window contact configuration (N/O or N/C)
y Maximum energy saving
Wiring diagram
www.meitavtec.com |
[email protected]
14-1
Special Controllers
Lead-Lag Controller Lead-Lag Controller for 2 complete units, with
AC
On/Off cycling every 24 hrs. The Lead-Lag controller is the most efficient way of COOL
controlling temperature in a remote location where both a primary cooling unit and a back-up cooling unit are used. EXT. SENSOR OPTION
The Lead-Lag controller controls 2 different units, treating them as 2 different stages, and allows them to cycle On and Off every 24hrs. This ensures that the
TIMER
desired room temperature is always maintained and also prevents wear of the units.
COMPRESSOR DELAY
With a 4°C differential kept always between room temperature and set temperature, the Lead-Lag controller is ideal for environments, such as computer rooms and other rarely visited rooms.
Features y Main Supply - 230VAC y Auto switch-over from one unit to the other every 24 hrs.
y In Auto mode, the 2 units (on-duty and off-duty) are treated like 2 stages
y On-duty unit compressor cycles between “On” and “Off” depending on room temp. and set temp.
y Time delay for compressor protection y 4°C always maintained between room temp and set temp- off-duty unit will start operating, if necessary.
Wiring diagram
14-2
www.meitavtec.com |
[email protected]
y Manual switch-over (3 positions) between “Auto”, “Off” and “Manual”
y Display of ambient temperature on a wall-mount room thermostat (ETN).
y Fault indication when ambient temperature rises above 28°C.
y External sensor for ambient room temperature.
Special Controllers
M6000-T1-T2-AN 230VAC, Multi Stage Controller, with 6 programmed
AC
outputs + analog inputs, for large applications
The M6000-T1-T2-AN controller is the best multi-stage
COOL
display controller on the market today. As opposed to many complicated units, the M6000-T1-T2-AN makes it incredibly easy to pre-set stages and all other parameters. This, plus the 6 individually programmed outputs, gives users a unique ability to “custom-build” their entire HVAC control system.
C
The M6000-T1-T2-AN offers the following: * 6 outputs- fully programmable * 2 outputs for On Indication (may activate fan)
TIMER
* Input for 2 temperature sensors to be used
FAULT INPUT
separately for each output (Meitav-tec's sensors) * Analog Inputs (0-10VDC) to be used separately for each output (humidity, pressure, water flow, etc)
PROG
The M6000-T1-T2-AN is suitable for even the largest of
M6000 (12V) + PS104
applications, such as chillers and big air-handling units.
ECONOMY
EXT. SENSOR OPTION
Features * Logic for output- Cool or Heat
Main Supply - 230VAC with power supply
Ex: Humidifier- If Heat is selected, output
Range temperature from 0°C-65°C
will be activated only if set point is Higher
Range set point for each output 0°C-60°C
than actual humidity * Compressor delay – Yes or No
y 6 programmable outputs, each output corresponds to a stage. Parameters that can be set are:
y Analog input can be set for different scales
* Set point
(0 to 100 as % or 0 to adjustable)
* Input to operate by: Analog, T1 or T2 (2 different
y Fault input – Normally Open (all unit OFF)
temperature sensors) – inputs may be combined
Energy saving – cost efficient, environmental friendly controller
* Differential (ΔT between stages)
y All outputs have Random start
Analog input (option)
T2 Sensor (option)
T1 Sensor (option)
230VAC Main input
ON Indication (fan)
Out 6
Out 5
Out 4
Out 3
Out 2
Out 1
Wiring diagram
www.meitavtec.com |
[email protected]
14-3
Special Controllers
FCC_01 - Free Cooling Controller Wall mount, 230VAC controller, for Cooling
AC
with outside fresh air – saves energy and refreshes room air. Meitav-tec's 'Free Cooling' controller offers a simple, energy saving solution to control room temperature. COOL
'Free Cooling' is virtually a Cool Only thermostat, which serves as a complementary to an existing HVAC control system. The thermostat is designed to EXT. SENSOR OPTION
take advantage of natural resources to cool room temperature; if outside temperature is cooler than ambient then the Free Cooling thermostat sends a signal to open a window or a damper to let fresh, cool air come in, and cool the room.
Features y Wall mount – 230VAC thermostat
y Difference between ambient and room
y Open / Auto / Close switch (for damper, fan or window)
jumper configured (Default is 1°C)
y External / Internal room sensor – jumper y Outside temperature sensor input y Can work as a “stand-alone” or next to another HVAC system
Wiring diagram
T
HI RE
LO ME
230VAC power supply 0
output 3A 0 ~
~
room temp. outside external temp. sensor sensor (option)
Free Cooling
14-4
y Energy saving controller y Aesthetic shaped controller
selectable
T
temperature, to open the window, is
www.meitavtec.com |
[email protected]
Special Controllers
TLC 230VAC
(available
also
in
24VAC
version),
Temperature Limit Controller for energy saving. Turns
off/on
compressor
as
per
adjustable
temperature limits. The TLC is a simple, yet efficient Temperature Limit Controller which offers substantial energy saving of Air Conditioning by limiting ‘Set Temperature’. The TLC is compact and easy to install at any existing AC system by connecting the compressor relay line to the TLC, the TLC overrides the AC control system and therefore can limit the Cool/Heat set points. Limit Cool & Limit Heat values are configurable. If ambient temperature from the return air sensor exceeds the predefined limits, the compressor will stop working. The TLC will automatically re-operate the compressor according to these values. The TLC allows significant energy saving in both commercial or residential applications while investment is minimal and installation is quick and simple.
Features y Energy Saving, cost effective Controller y Adjustable temperature limits for Cool / Heat using 2 manual knobs
y Power supply - 230VAC for HVAC operation y Easy, quick installation for any existing AC y 1A, 230Vac dry contact for compressor relay
y With or without compressor delay (to protect compressor) – jumper selectable
y TLC installation requires no modification in the existing room devices
y No decline in convenience to user y Return On Investment (ROI) is fast
Wiring diagram
www.meitavtec.com |
[email protected]
14-5
14-6
www.meitavtec.com |
[email protected]
Sensors and Accessories
DT-02 Duct Sensor
Duct sensor in a plastic enclosure Suitable for all Meitav-tec's thermostats
Features y Dimensions:
y Range - -40°C to 110°C ; 39°F to 230°F
*
width - 45 mm
*
height – 38 mm
*
depth – 20 mm
y Thermistor type - NTC
*
rod length – 155 mm
y Standard – UL94V-0
y Measurement accuracy - ±3%
y Weight: 14 gr.
y Color – white
y Resistance – 25C; 77F = 50 KΩ
y Plastic - ABS
y Thermal Time Rate – 15 seconds
Wiring Diagram
www.meitavtec.com |
[email protected]
15-1
Sensors and Accessories
GHU Room/Duct Sensor General purpose stand-alone humidity and
0-10V
temperature sensor for room or duct.
OUTPUT
GHU Room Sensor
The GHU Room or Duct sensors are general purpose, all-in-one™ sensors for both temperature and humidity.
HUMIDITY
Humidity measurement is given as a proportional output, 0-10VDC while temperature reading may be given in one of two ways: 1.
Normally via a thermistor (for controllers that do not offer 0-10VDC temperature inputs- temperature sensor used must be Meitav-tec type)
2.
GHU Duct Sensor
As a proportional signal (0-10VDC)
With wide temperature and humidity ranges, the GHU Room / Duct sensors are practical and ideal solutions for all room and duct applications.
Features y Main Supply – 24VAC or 12VDC y Proportional temperature output- 0-10VDC y Proportional humidity output- 0-10VDC
Wiring Diagram
0
Temp. 0-10V
Hum. 0-10V
Temperature sensor
15-2
www.meitavtec.com |
[email protected]
y Temperature set point range from 0°C-60°C / 32°F-140°F (0-10VDC)
y Humidity set point range from 15%-90% RH (0-10VDC)
Sensors and Accessories
TS-01 & TS-02 Temperature Sensors
TS-01 External Temperature Sensor, 80 cm cable TS-02 External Temperature Sensor, 180 cm cable
Features y Cable 2 wire – AWG 24 BLACK
y Thermal Time Rate – 15 seconds
y Thermistor color – silver or brass
y Range - -40°C to 110°C ; 39°F to 230°F
y Dims of Thermistor 1" x 0.25" (2.5 cm x 0.6 cm)
y Thermistor type - NTC
y Resistance – 25C; 77F = 50 KΩ
TS-05 & TS-06 Temperature Sensors TS-05 External Temperature Sensor, 80 cm cable TS-06 External Temperature Sensor, 300 cm cable
Thermistor is coated with isolating plastic. Other technical specifications are the same as TS-01 & TS-02.
www.meitavtec.com |
[email protected]
15-3
Sensors and Accessories
RS-01 Temperature Sensor External Temperature Sensor in a decorative box
External temperature sensor in a wall mount, decorative box. Suitable for all Meitav-tec's thermostats
Features y Cable 2 wire – AWG 24 BLACK
y Thermal Time Rate – 15 seconds
y Dimensions – 1.8" x 1.5" (46 mm x 38 mm)
y Range - -40°C to 110°C ; 39°F to 230°F
y Resistance – 25C; 77F = 50 KΩ
y Thermistor type - NTC
RS-02 Average Temperature Sensor Average Temperature Sensor in a decorative box
y Ideal for wide, open space hall where temp. differs in each location
y 2 units required for average measurement of Temperature y Provides average room temperature, using external sensors, installed in two different locations
y Each temperature sensor installed in a wall-mount, decorative box
y Suitable for all Meitav-tec's thermostats y Technical Specifications are the same as RS-01.
15-4
www.meitavtec.com |
[email protected]
Sensors and Accessories
RT03 Remote Control Hand held remote control unit, for Meitav-tec's thermostats and controllers. HEAT
An infra-red remote controller, suitable for Meitav-tec's thermostats and receivers. Easy-to-use, with big LCD and a large temperature digit display.
Features
TIMER
y On/Off
y Timer - Start / Stop
y Modes: Cool / Heat / Auto-change-over / Fan only
y Real time clock & day
y Fan speeds: High / Medium / Low / Auto
y 2 X AAA battery operated
y Temperature set point
y Elegant Housing for wall mounting
y °C or °F temperature scale
y Available in black or white panel
AUTO CHANGE-OVER
RT04 Remote Control Hand-held remote control for programmable
COOL
thermostats, with USA weekly program HEAT
An infra-red, remote controller, suitable for programmable thermostats. Easy-to-use, with big LCD and a large
AUTO CHANGE-OVER
temperature digit display, °F display.
F
Features y On/Off
y Up to 6 different weekly programs
y Modes: Cool / Heat / Auto change-over / Fan only
y Timer
y Temperature set-point
y Real time clock
y °F temperature scale
y 2 X AAA battery operated
y 2 or 4 periods a day, each with a different set point
y Available in black or white panel
TIMER
www.meitavtec.com |
[email protected]
15-5
Sensors and Accessories
RT05 Remote Control
Hand-held remote control for programmable thermostats, with European weekly program HEAT
An infra-red, remote controller, suitable for programmable AUTO CHANGE-OVER
thermostats. Easy-to-use, with big LCD and a large temperature digit display, °C display.
PROG
C
Features y On/Off
y Up to 6 different weekly programs
y Modes: Cool / Heat / Auto change-over / Fan only
y Timer
y Temperature set-point
y Real time clock
y °C temperature scale
y 2 X AAA battery operated
y Up to 4 start /stop a day, each with a different set
y Available in black or white panel
TIMER
point
RT40/41 Remote Control Hand-held remote control for stand-alone dampers,
for Meitav-tec’s receivers COOL
An infra-red remote controller, suitable for standalone dampers. Easy-to-use, with big LCD and a
HEAT
large temperature digit display.
C F
Features y On/Off
y °C or °F temperature scale
y Modes: Cool / Heat
y Real time clock & day
y Temperature set point
y Elegant Housing for wall mounting
y Timer - Start / Stop, hour & minute display
y Available in black or white panel
y 2 X AAA battery operated Note: RT41 Remote Control model has the same specifications as RT40, but with no Modes or Timer. It has hour display only.
15-6
www.meitavtec.com |
[email protected]
Power Supplies
PS-102 230VAC – 12VDC, Power Supply The PS-102 is a power supply for HVAC system. It converts 230VAC to 12VDC for thermostat operation and through relays, transfers commands from thermostat to operate 230VAC HVAC system. It offers 7 relay outputs to control HVAC system and 3 inputs for Temperature Sensors.
Features
Wiring Diagram
y Main Supply - 230VAC
PS102
y 7 x 230VAC outputs – each 6A (resistive), or 3A (inductive), total ≤ 9A
y 7 x 12VDC inputs y 3 inputs for temperature sensors
To thermostat (12VDC)
y Inputs & outputs are terminal blocks, screw connector y PS-102 is supplied in a plastic enclosure box
12VDC supply (to thermostat)
21
RL 7
17
1 22
RL 6
16 18
2
RL 5
15
3
RL 4
14
4
RL 3
13
5
RL 2
12
6
RL 1
11
7
+
8
+ POWER SUPPLY 12VDC
9 Sensors
10
Fuse 10A
~ 0
20
To system (230VAC)
230VAC Main input
T1 T1 T2 T2 T3 T3
Sensors
PS-24 24VAC - 230VAC –Power Supply Ideal for 230VAC Fan operation in 24VAC HVAC systems The PS-24 is a power supply for HVAC system. It converts 24VAC to 230VAC thorough relays for fan operation and transfers commands from thermostat to operate 24VAC HVAC system. All in all, it offers 3 relay 230VAC outputs to control HVAC fan system and 4 x 24VAC inputs, directly transferred to 24VAC outputs.
Features
Wiring Diagram
y Main Supply - 230VAC y 3 x 230VAC outputs + 4 x 24VAC outputs y 7 x 24VAC inputs + 1 Temperature input y Inputs & outputs are terminal blocks, screw connector y PS-24 is supplied in a plastic enclosure box
www.meitavtec.com |
[email protected]
16-1
Power Supplies
PS-104 230VAC – 12VDC, Power Supply The PS-104 is a power supply for HVAC system. It converts 230VAC to 12VDC for thermostat operation and through relays, transfers commands from thermostat to operate HVAC system. It offers 8 relay outputs to control HVAC system and 3 inputs for Temperature Sensors.
Features
Wiring Diagram
y Main Supply - 230VAC y 8 x 230VAC outputs – each 6A (resistive), or 3A (inductive), total ≤ 9A
y 7 x 12VDC inputs
To thermostat (12VDC)
y 3 inputs for temperature sensors y Inputs & outputs are terminal blocks, screw
12VDC supply (to thermostat)
connector
22
RL
8
18
21
RL
7
17
3
RL
6
14
1
RL
5
16
2
RL
5
15
4
RL
3
13
5
RL
2
12
6
RL
1
11
7
+
8
-
9 Sensors
10
+ POWER Fuse 10A SUPPLY 12VDC
~ 0
20
T1 T1 T2 T2 T3 T3
Sensors
PS-600 230VAC – 24VDC, Power Supply Ideal for 230VAC HVAC units operated by 24VAC The PS-600 is a power supply for HVAC system. It converts 230VAC to 24VDC for thermostat operation and through relays, transfers commands from thermostat to operate the 230VAC HVAC system. It offers 6 relay outputs to control HVAC system controllers
Features y Main Supply - 230VAC y 6 x 230VAC outputs – 3 outputs 3A and 3 outputs 1A y 6 x 24VDC inputs y 10 direct input-output connections low Voltage (24V) y Inputs & outputs are terminal blocks, screw connector y PS-600 is supplied in a plastic enclosure box
16-2
www.meitavtec.com |
[email protected]
Wiring Diagram
To system (230VAC)
230VAC Main input
CTU Communication Controller 230VAC, 115VAC, 24VAC
Specifications Temperature Range
Accuracy
+1
Weight
0.545 Kg
Plastic
PC/ABS
Color
gray
Flammability
UL94V-0
204
.5 m
m
92
mm
www.meitavtec.com |
[email protected]
B-1
ERT Wall mount thermostat 230VAC
Specifications Temperature Range
10°C ÷ 30°C , 50°C ÷ 86°F
Accuracy
±1°C
Weight
0.25 Kg
Plastic
PC/ABS
Scale
°C / °F
Flammability
UL94V-0
Color
white
Temperature Input
50K@25°C
83mm
45mm
B-2
www.meitavtec.com |
[email protected]
30mm
ETN (non programmable) Wall mount thermostat/panel 24VAC, 12VDC Colors
white silver black gold
others
Accessories TS01
RS01
RS02
WP4
RS03
Specifications Temperature Range
10°C ÷ 30°C, 50°C ÷ 86°F
Accuracy
±1°C
Weight
0.25 Kg
Plastic
PC/ABS
Scale
°C / °F
Flammability
UL94V-0
Color
white, silver, black, others
Temperature Input
50K@25°C
80mm
Front view
Side view
92mm
22mm
80mm
www.meitavtec.com |
[email protected]
B-3
ETN (programmable) Wall mount thermostat/panel 24VAC Colors
white silver gold black others
Accessories TS01
RS01
RS02
Specifications Temperature Range
5°C ÷ 35°C
Accuracy
±1°C
Weight
0.125 Kg
Plastic
PC/ABS
Scale
°C / °F
Flammability
UL94V-0
Color
white, silver, black, others
Temperature Input
50K@25°C
80mm
B-4
www.meitavtec.com |
[email protected]
Front view
Side view
92mm
22mm
80mm
WP4
RT03
FMH Flush Mount thermostat/panel 24VAC, 220VAC, 110VAC Colors
white silver gold black
others
Accessories TS01
RS01
RS02
DT02
RT03
Specifications Temperature Range
10°C ÷ 30°C , 50°C ÷ 86°F
Accuracy
±1°C
Weight
0.200 Kg
Plastic
PC/ABS
Scale
°C / °F
Flammability
UL94V-0
Color
white, silver, black, others
Temperature Input
50K@25°C
Front view
Side view
Back view
6mm (max)
118mm
75mm
O
C
80mm
Cool Hi ON Heat Med Lo
ON OFF MODE
53mm
FAN
35mm (inside the wall)
www.meitavtec.com |
[email protected]
B-5
FMT(non programmable) Flush mount vertical thermostat/panel 24VAC , 220VAC, 110VAC
Accessories TS01
RS01
RS02
Specifications Temperature Range
10°C ÷ 30°C, 50°C ÷ 86°F
Accuracy
±1°C /±1.5°F
Weight
0.200 Kg
Plastic
PC/ABS
Scale
°C / °F
Flammability
UL94V-0
Color
white
Temperature Input
50K@25°C / 77°F
Front view 80mm
Side view
Back view
6mm (max)
53mm
118mm
75mm
ON
SELECT
35mm (inside the wall)
B-6
www.meitavtec.com |
[email protected]
RT03
MIGA Main Controller ALL-IN-ONE™ 230VAC
Accessories ETN-Miga
FMH-Miga
TS01
MP101
M1P
RT03
Specifications Temperature Range
10°C ÷ 30°C
Accuracy
±1°C
Weight
0.400 Kg
Plastic
PC/ABS
Scale
°C / °F
Flammability
UL94V-0
www.meitavtec.com |
[email protected]
B-7
PS (Communication Controller) Main Controller 230VAC, 115VAC, 24VAC
Accessories FMH-X500
IRP-X500
FMT-X500
ETN-X500
RS01
RS02
Specifications
B-8
Temperature Range
10°C ÷ 30°C
Accuracy
±1°C
Weight
0.340 Kg
Plastic
PC/ABS
Scale
°C / °F
Flammability
UL94V-0
www.meitavtec.com |
[email protected]
RS03
TED (without display) Wall mount, mechanical thermostat 220VAC, 24VAC
Accessories TS01
RS01
RS02
WP1
Specifications Temperature Range
10°C ÷ 30°C
Accuracy
±1°C
Weight
0.150 Kg
Plastic
PC/ABS
Scale
°C
Flammability
UL94V-0
Color
white
Temperature Input
Thermistor 50K@25°C
125mm
106mm
10mm
www.meitavtec.com |
[email protected]
30mm
B-9
TED (with display) Wall mount, mechanical thermostat 220VAC, 24VAC
Accessories TS01
RS01
RS02
WP1
Specifications Temperature Range
10°C ÷ 30°C
Accuracy
±1°C
Weight
0.150 Kg
Plastic
PC/ABS
Scale
°C
Flammability
UL94V-0
Color
white
Temperature Input
Thermistor 50K@25°C
125mm
B-10
www.meitavtec.com |
[email protected]
106mm
10mm
30mm
Contact Us
For questions regarding technical or marketing issues, please contact us at: Address: Meitav-tec Ltd. (Contel Group) 6, Sapir street, New Industrial Zone P.O.B 5221 Rishon Le’Zion, 75150, Israel Tel: +972-3-9626462 Fax: +972-3-9626620 Web: www.meitavtec.com E-mail:
[email protected]
www.meitavtec.com |
[email protected]
C
Product Index B BDIR-24-SUPER-PROG C CEM-24-SUPER CEO-24-HC22 CEV-24-SUPER CHU-24-SUPER CO Detector CTR-24-SUPER CTU1601 CTU1800-PM2-3S-FC-SUPER - Maxinet protocol CTU2500-P-3S-FC-SUPER – BACnet Protocol CTU2601 – BACnet Protocol CTU4500-P-3S-FC-SUPER – Modbus Protocol CTU4500-PM2-3S-FC-SUPER - Modbus Protocol CTU4601 D DA-24-3W DA-401 - Stand Alone Dampers DEH-2000 DT-02 Duct Sensor E EC-300 ERHU-55 ERT100-LCD-IR ERT-208 ERT-209 ETN-24-AZC ETN-24-HC21-PROG-ECO ETN-24-HC21-PROG-OA ETN-24-HC21-PROG-TS ETN-24-P/PD-FC-SUPER2 ETN-24-P/PM-1S (Cool Only) ETN-24-P-1S (Cool Only) ETN-24-P-3S-HU ETN-24-PH-FC-SUPER ETN-24-PM2 series ETN-24-PMH series ETN-24-SUPER-3S-FP-PROG-EU-C ETN-24-SUPER-PROG-7DAYS-US Series ETN-24-SUPER-PROG-EU Series ETN-24-SUPER-PROG-US Series ETN-24-SUPER-SF ETN-24-SUPER-SH ETN-24-SUPER-SI ETN-40P1 ETN-C-24-SUPER- Maxinet protocol ETN-MIGA-IR ETN-X500 F FCC_01 – Free Cooling Controller FE-340-H1 FE-340-H1-PAR-45 FE-340-H1-PAR FHV-H1-PR-IR FMH-220-HC11-3S-IR FMH-220-HP11-3S-IR FMH-220-P-FC-SUPER FMH-24-C2-3S-IR FMH-24-P-1S FMH-24-PD-1S FMH-40P1 FMHC220-FC-MDB03 - Modbus Protocol FMHC220-P-FC-MDB01 - Modbus Protocol FMH-FC-SUPER3 FMH-FC-SUPER4 FMH-MIGA-IR
2-10 2-12 2-11 2-13 4-1 12-2 2-9 7-13 7-11 8-9 8-31 8-19 8-21 8-32 10-6 10-5 4-3 15-1 14-1 4-2 1-10 1-8 1-9 10-1 2-6 2-7 2-8 3-1 3-11 3-6 4-4 3-2 3-9 3-10 2-1 2-3 2-2 2-4 1-3 1-1 1-2 10-3 7-2 5-5 8-24 14-4 11-1 11-3 11-2 11-4 1-6 1-4 5-3 1-5 3-3 3-4 10-4 8-23 8-28 5-1 5-8 5-6
F FMH-X500 FMT-24-AZC-Proportional-IR FMT-24-PD-3S FMT-24-SUPER FMT-24-SUPER-PROG FMT-X500 G GAQ - Air Quality Controller & Sensor Series GHU Room/Duct Sensor I IRP-401 IRP-X500 + RT03 L Lead-Lag Controller M M1P M4000MD M5001-24-4X0-10VDC M5003-24VAC/12VDC M6000-T1-T2-AN MCU MIGA AB MIGA1-AC-SUPER MIGA1-FC-SUPER P PS 2007 - Multi-Zone System control system PS-102 PS-104 PS1600 PS1800-AC-SUPER - Maxinet protocol PS1800-FC-SUPER - Maxinet protocol PS1800-FC-SUPER-02 - Maxinet protocol PS1800-P-FC-SUPER - Maxinet protocol PS-1800-PM2-3S-FC-SUPER - Maxinet protocol PS-24 PS2500-3S-FC-SUPER –BACnet Protocol PS2500-P-3S-FC-SUPER – BACnet Protocol PS2500-PM2-3S-FC-SUPER – BACnet Protocol PS2500-TA2-3S-FC-SUPER – BACnet Protocol PS4500-3S-FC-SUPER –Modbus Protocol PS4500-AC-SUPER-02-WET – Modbus Protocol PS4500-P-3S-FC-SUPER – Modbus Protocol PS4500-PM2-3S-FC-SUPER – Modbus Protocol PS4500-TA2-3S-FC-SUPER – Modbus Protocol PS-600 PS8-FH + ETN-8H PSMZ-100/200 for Multi-Zone System PS-MZ502 Multi-Zone System R RS-01 Temperature Sensor RS-02 Average Temperature Sensor RT03 Remote Control RT04 Remote Control RT05 Remote Control RT40/41 Remote Control T TED-220-C1-3S TED-220-HC11-3S TED-220-HP11-3S TED-24-AUTO-SUPER TED-24-P-3S (FAN 230 VAC) TED-24-P-3S-Cool Only (FAN 230 VAC) TED-24-SUPER TES-220-HC11-3S TLC TS-01 & TS-02 Temperature Sensors TS-05 & TS-06 Temperature Sensors
8-25 10-2 3-5 1-7 2-5 8-26 12-1 15-2 10-4 8-27 14-2 5-7 13-1 4-6 4-5 14-3 7-1 5-9 6-1 5-4 9-3 16-1 16-2 7-14 7-3 7-5 7-15 7-7 7-9 16-1 8-1 8-3 8-5 8-7 8-11 8-29 8-13 8-15 8-17 16-2 11-5 9-1 9-5 15-4 15-4 15-5 15-5 15-6 15-6 1-14 1-12 1-11 1-15 3-7 3-8 1-13 1-16 14-5 15-3 15-3
Specifications and product availability are subject to change without notice. Specifications and feature sets are for technical information only and are not legally binding.
www.meitavtec.com |
[email protected]
D
