Preview only show first 10 pages with watermark. For full document please download

Memory Module Specification

   EMBED

Share

Transcript

T E C H N O L O G Y Memory Module Specification KHX3200AK2/2G 2GB (1GB 128M x 64-Bit x 2 pcs.) PC3200 CL2 184-Pin DIMM Kit DESCRIPTION: Kingston's KHX3200AK2/2G is a kit of two 128M x 64-bit 1GB (1024MB) DDR400 SDRAM (Synchronous DRAM) CL2 memory modules, based on sixteen 64M x 8-bit (16M x 8-bit x 4 Bank) DDR400 SDRAM in TSOP packages. Total kit capacity is 2GB (2048MB). Each module pair has been tested to run at low latency timing of 2-3-2-6 at 2.65V. The SPD is programmed to JEDEC standard latency timing of 3-3-3-8 at 2.6V. Each 184-pin DIMM uses gold contact fingers and requires +2.6V. The electrical and mechanical specifications are as follows: FEATURES: Power supply : Vdd: 2.6V ± 0.2V, Vddq: 2.6V ± 0.2V Double-data-rate architecture; two data transfers per clock cycle Bidirectional data strobe(DQS) Differential clock inputs(CK and CK) DLL aligns DQ and DQS transition with CK transition Programmable Read latency 2 (clock) Programmable Burst length (2, 4, 8) Programmable Burst type (sequential & interleave) Timing Reference: 3-3-3-8 at +2.6V / 2-3-2-6 at +2.65V Edge aligned data output, center aligned data input Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh) Serial presence detect with EEPROM High Performance Heat Spreader PCB : Height 1.250” (34.75mm), double sided component PERFORMANCE: Clock Cycle Time (tCK) Row Cycle Time (tRC) Refresh Row Cycle Time (tRFC) Row Active Time (tRAS) Power UL Rating Operating Temperature Storage Temperature 5ns (min.) / 10ns (max.) 55ns (min.) 65ns (min.) 40ns (min.) / 100,000ns (max.) 3.825 W (operating per module) 94 V - 0 0o C to 70o C -55o C to +150o C KE Document No. 4804283-001.A00 YE D 09/15/05 Page 1 Kingston Technology MODULE DIMENSIONS: Units : Inches (Millimeters) 1.250" 1.200” (34.75) (30.48) (17.80) 0.700” 0.393” (10.00) 0.157 (4.00) 0.1496 (3.80) 2.175 0.071 (1.80) 0.100 0.26 (6.62) 0.250 (6.350) (2.50 ) 2.886” (73.30) 5.250” (133.35) 1 0.000” (00.00) 0.000” (00.00) 0.118 (3.00) 0.039 ± 0.002 (1.000 ± 0.050) 0.0787 (2.00) 0.0078 ±0.006 (0.20 ±0.15) 0.050 (1.270) 0.1575 (4.00) For more information, go to www.kingston.com All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to computer components. Document No. 4804283-001.A00 Page 2