Preview only show first 10 pages with watermark. For full document please download

Mems Multimode Modular Matrix Optical Switch (up To 8x8)

   EMBED

Share

Transcript

MEMS MODULAR MULTIMODE MATRIX OPTICAL SWITCH DiCon’s MEMS Modular Multimode Matrix Optical Switch is based on DiCon’s industry proven, long-life, reliable MEMS 1xN optical switch components. Every input has a 1xN fiber optic switch, while every output has a Nx1 fiber optic switch. The output fibers of each 1xN are spliced to the N side of each Nx1 to allow any input to connect to any output, in a fully non-blocking optical cross-connect manner. FEATURES High Reliability  Proven MEMS Technology  Lifetime > 1 Billion Switch Cycles Available with 50 m or 62.5 m Multimode Fiber  APPLICATIONS When combined with other fiber optic components, matrix optical switches are useful to add redundancy to an optical network. They are also useful to share resources in test & measurement applications. Specifications subject to change. Copyright © 2013 DiCon Fiberoptics, Inc. All rights reserved. ORDERING INFORMATION OPTICAL SPECIFICATIONS1 RATING 2.0 dB max. 2.4 dB max. -25 dB max. -20 dB max. -20 dB max. 30 ms max. 0.4 dB max. 0.04 dB max. 10 9 cycles min. 500 mW max. -5 to 70 oC -40 to 85oC Multimode, Bare Fiber 1. Specifications are without connectors. 2. IL is measured at specified wavelength, 23oC. 3. IL is for single-band. Dual-band add 0.4 dB. 4. Repeatability is defined after 100 cycles. MECHANICAL DIMENSIONS (Units: mm) Top View MX3 Product Code MX3 MEMS Matrix Switch Configuration MxN MxN Non-Blocking (Specify M,N≤8 for 50m and M,N≤4 for 62.5m) Control Interface I2C RS2 I2C RS232 Wavelength Range 8 9 8/13 850 nm only 980 nm only 850 & 1310 nm Other wavelengths available upon special request Fiber and Jacket Type 50/BF 62/BF 50/LT 62/LT 50m core, bare fiber 62.5m core, bare fiber 50m core, loose tube 62.5m core, loose tube Connector Type FC/SPC FC/SPC FC/APC FC/APC N NONE Also Available: SC, SC/UPC, SC/APC, ST, ST/UPC, LC Pigtail Length 1 X 1 Meter Specify X Meters Tolerance is +/- 0.05 m ELECTRICAL SPECIFICATIONS Front View PARAMETER Latching Type Control Type Vcc Voltage Power Consumption Connector Type RATING Non-latching I2C or RS232 12 VDC 700 mW max. Molex 87833-1620 DiCon Fiberoptics, Inc. 1689 Regatta Blvd. Richmond, CA 94804 Tel. (510) 620-5000 Fax. (510) 620-4100 www.diconfiberoptics.com MEMS MODULAR MULTIMODE MATRIX OPTICAL SWITCH PARAMETER Insertion 4x4 Loss2,3 8x8 Crosstalk 50 m 62.5 m Back Reflection Switching Time TDL Repeatability4 Durability Optical Power Operating Temperature Storage Temperature Fiber Type SPECIFICATIONS / ORDERING INFORMATION MEMS MODULAR MULTIMODE MATRIX OPTICAL SWITCH 0261A