Transcript
321-56867-21A Sep. 2009
Menu Map Sheet
Press or menu option.
For details on the organization of the menu settings and the method of operation of the menu, see "3. MENU SETTINGS" (^ page 40).
STAND POURING
Press [MENU/ENTER].
P.77
General weighing mode
Refers to a page in the instruction manual.
Press
The default settings (settings when the menu is reset)
to confirm.
WIN|.U
WIN-
WIN-.U
WindowsDirect communication function
APL.FUNC
PCS
SAMPLE
Item number ~
PERCENT
SAMPLE
100% reference
Piece counting
Percentage weighing
OPTION FORMULA
TOOLS Other functions
WIN|
WIN|.U
WIN-
WIN-.U
P.111
WindowsDirect communication function
APL.PRN P.111
Press [PRINT] for 3 sec.
Application output
AUTO.PRN
LD. . LD.UL. LD. .Z LD.UL.Z LD.OK.
Auto print function
P.71
Zero tracking function
Application function mode
Weight display
P.77
Pouring mode
WIN| Z.TRC
Press to proceed to the next menu option.
Data Output Menu
Main Menu Weight display
Press to return to the previous menu option. (Pressing for around 3 seconds during menu operation returns you to the weighing mode.)
to search for the
TARGT
TG.VAL
CHECK.W
OVR.RNG HI.LIM LO.LIM UND.RNG
Checkweighing mode
PARAM.W
SEQ.PRN
Continuous output function
P.96
Output timing change function
PRINT.F
COMM.SET
Target value
Communication settings
Permissible range Checkweighing range upper limit Pass range upper limit Pass range lower limit
FAST
BAND
System
POINT
Decimal point indication
Zero or negative value
MODE.1 MODE.2 MODE.3 MODE.4 MODE.5
Key operation
0.5D 1D 10D 50D 100D 1000D
P.129
P.126
Standard settings (MODE1 - MODE5)
MODE.U
BPS Baud rate
P.80
P.79
PARITY Parity
B. 300 B. 600 B.1200 B.2400 B.4800 B.9600 B. 19.2K B. 38.4K
[300]
P.NONE P.ODD P.EVEN
None
S. 1 S. 2
1 bit
HS.OFF HS.HW HS.SW H.S.TIM
None
[600] [1200] [2400]
P.127
[4800] [9600] [19.2 K] [38.4 K]
P.127
Odd Even
PERIOD Period
STOP
P.42
AUTO.OFF
Auto power-off
BC.LIT
Backlight (TXB series only)
Stop bit
HAND.SHK Handshake
P.138 P.140
AUTO
SEM.AUTO
DF. DF. DF. DF.
D.FORM
Weighing mode
OFF display
Data format
P.139
MANU
1 2 3 4
P.127
2 bits
Hardware Software
P.127
Timer Data format 1 Data format 2 Data format 3 Data format 4
P.128
DF.FRE
All segments lit
D. HEAD
Head byte
D. LEN
Data length
Free format
BAL.ID
Balance ID
P.69
PASS.WRD
Password
P.141
COND.OUT
Menu settings output
P.53
Menu reset
P.51
RESET
P.108
No filter
COMMA
START
50%
SOON
User-specified settings
Comma
Start display
RET.50
On OK
Fast
Stability detection range
SYSTEM
P.104
Checkweighing range lower limit
Stability mark
RET. 0
Zero return judgment
On -0Ld
MANU NO.FIL
P.92 Specific percentage reference
STB.MK
Weighing parameters
Z.RET
On 0Ld
P.106
P.102
LM.VAL
On -Ld
P.87
Formulation
Target mode
On Ld
DELIM
CR LF CR+LF COMMA
Delimiter
CR LF CR+LF Comma
WIN|
P.128
WIN|.U
WindowsDirect communication function
WIN-
Unit setting menu Weight display
Press [UNIT] for 3 sec.
UNIT- g g UNIT- mg #1 UNIT- kg #2 UNIT- ct
Calibration menu P.83
Other units cannot be selected in some countries due to legal restrictions. #1: mg cannot be selected on models whose minimum indication is 10 mg or greater. #2: kg cannot be selected on the TWC***L and TXC***L.
UNIT-U
CONV.K
User-specified units
Minimum indication
MIN.D Conversion factors
P.84 P.85
CAL.EXE Weight display
Calibration
E.CAL E.TEST I.CAL I.TEST
Press [CAL] for 3 sec.
GLP.OUT P.CAL
WIN-.U
Zero / tare menu Span calibration using an external weight Calibration check using an external weight Span calibration using the internal weight (TW series only) Calibration check using the internal weight (TW series only)
P.57 P.62
Weight display
P.56 P.60
GLP output function
P.142
Calibration of the internal weight (TW series only)
P.64
Press [O/T] for 3 sec.
Z.TRC
Zero tracking function
P.71
A.TARE
Auto tare function
P.74
A.ZERO
Auto zero function
P.72
TARE.F
SOON
Zero / tare timing change function
P.75
Operation Control Panel
Operation keys
Display panel
Key
No.
5 [MENU/ENTER] 6㨇UNIT㨉 6 [UNIT]
Press Once and Release
Press and Hold for About 3 Seconds
1
[BREAK]
Switches between the operation and standby modes
2
[CAL]
Performs calibration
Enters the calibration menu
3
[O/T]
Tares the balance (setting it to zero)
Opens the zero / tare menu
[PRINT]
Outputs the weight reading to a peripheral device (printer or PC)
Opens the data output menu
4
-
Menu operation keys 7 7㨇FUNC㨉 [FUNC] 2 㨇CAL㨉
1 㨇BREAK㨉
3 㨇O/T㨉
4 㨇PRINT㨉
Operation keys With the TXB series,
Menu operation keys
is provided.
Display panel 1
b
No. 1
Display
c
3
d
e
4
f
5
g
6
h
i
7
j
Name Battery symbol
8
9
k
0
l m
a
n
Description
See:
Lit when the weight reading is stable. Also lit when the option currently set in menu setting is displayed.
^ P.33
Press and Hold for About 3 Seconds
Displays the main menu
Shows the menu displayed last
6
[UNIT]
• In the weighing mode: Used to select the unit • When piece counting: Displays the unit weight • When performing percentage weighing: Displays the reference weight
• In the weighing mode: Opens the unit setting menu • When piece counting: Used to select the item number • When performing percentage weighing: Used to select the percentage reference
7
[FUNC]
Switches between the weighing mode and the application function mode
Selects the minimum number of displayed digits
8
[Res]
The response of the display is increased.
-
9
[Stb]
The stability of the display is increased.
-
No.
2
Press Once and Release
[MENU/ENTER]
5
9㨇Stb㨉 9 [Stb]
8㨇Res㨉 8 [Res]
∗1
Key
No.
∗1
Display
Name
Description
See:
9
Auto print symbol
Lit when the Auto Print function is set.
^ P.108
0
Win symbol
Lit when the WindowsDirect communication function has been set.
^ P.112
a
Communication symbol
Indicates that data is being exchanged with an external device.
b
Comparator symbol
When the comparator function (Checkweighing) has been set, indicates the comparison judgment.
^ P.102
c
Stability mark
Lit when the weight reading is stable. Lit when the option currently set in menu setting is displayed.
^ P.48 ^ P.79
d
Minus symbol
Lit when the weight reading is negative.
e
Ready symbol
Lit during the standby mode (TX series only). Also, during weighing, lit to indicate the ready to weigh status, for example when using the formulation function.
^ P.43 ^ P.96
f
Number symbol
Lit when it is possible to enter numerical values.
^ P.49
g
Hold symbol
Lit when a value that is not the real-time weight reading (for example the indication of the unit weight in piece counting) is displayed.
^ P.90 ^ P.95
h
Net weight symbol
Indicates that the weight reading displayed in mixing measurement (formulation) is the net weight of the current component with the weight of the container and prior components. Also indicates that a measuring operation is in progress.
^ P.97
i
Gross weight symbol
Indicates that the weight reading displayed in mixing measurement (formulation) is the total weight of all of the components of the mixture with the weight of the container subtracted.
^ P.97
-
-
2
Zero tracking symbol
Lit when the zero tracking function is set ON.
^ P.71
3
Weight symbol
This symbol is lit during calibration.
^ P.57 ^ P.62
j
Item number indication
Shows the item number in the piece counting mode.
^ P.90
4
Easy setting indicator
Indicates what level the response and stability are currently set to.
^ P.78
k
Inverse triangle symbol
^ P.50
5
Pouring symbol
Lit when the pouring mode is set.
^ P.77
When this symbol is lit when changing the position of the decimal point in the conversion factor with the user-specified units, numerical values can be entered without a decimal point.
Formulation symbol
Lit during mixing measurement (formulation) operations.
^ P.96
l
Piece counting symbol
Lit while the piece counting mode is in effect.
6
^ P.90
7
Menu lock symbol
Lit while the menu is locked.
^ P.52
m
Specific percentage weighing symbol
Lit when the specific percentage reference has been set for percentage weighing.
^ P.94
8
Menu operation key symbol
During menu operation, indicates which of the menu operation keys can be used.
^ P.47
n
Percentage weighing symbol
Lit during percentage weighing.
^ P.95
