Transcript
Mercury QTS-ODU X4G CPE High Performance, Outdoor CPE
Designed for Operators, by Operators
RELIABLE & CONVENIENT WIRELESS BROADBAND ACCESS The Mercury QTS-ODU Customer Premises Equipment (CPE) is a high performance 802.16e CPE product designed to enable quick service deployments to the most remote customers. The QTS-ODU delivers high capacity and long range coverage to end users by utilizing a smart 2x2 antenna design and OFDM techniques.
TECHNICAL FEATURES The QTS-ODU is a cost effective outdoor data CPE based on the standard implementation of the IEEE 802.16e Wave II specification. It is able to meet the most demanding requirements of large service providers with high throughput and availability. The QTS-ODU supports 2x2 MIMO and Adaptive Modulation Coding (AMC) to maximize system gain and capacity. Accompanied with Orthogonal Frequency Division Multiplexing (OFDM), the integrated high-gain antenna of the QTS-ODU enhances performance in non-line-of-sight (NLOS) environments. Additionally, the integrated antenna design and heat dissipation advancements help to reduce the overall power consumption, ultimately improving the operational life span of the device. The QTS-ODU has a single data port and built-in firewall providing an effective all-in-one solution for home network users. The QTS-ODU built-in router function provides multiple VLAN support, TOS/DSCP tagging and rate limiting to ensure greater service feasibility and reliability. The device also encompasses a signal strength indicator on the back panel, making it intuitive for technicians to install. The QTS-ODU offers local and remote management through a simplified Web interface. The device also supports TR-069 and OMA-DM services for centralized auto-provisioning and upgrade management.
Mercury Networks © 2015
Specifications Radio Frequency Bands 2.3-2.4GHz, 2.48-2.70GHz, 3.3-3.7GHz (3.65GHz FCC)
SUPERIOR RANGE 14 to 16 dBi, high-gain patch directional antenna, allows for larger subscriber coverage.
Channel Size 3.5, 5, 7, 10MHz Duplex Method TDD (2x2 MIMO)
Antenna Gain 14 to 16 dBi (cross polarized)
FFT 1024/512 FFT points
Power Output > 24 dBm per antenna port
Air Link Optimization HARQ
BB Support MIMO A&B, ARQ, HARQ (Cat. 7)
Authentication EAP-TLS and EAP-TTLS
User Interface EASY DEPLOYMENT Signal strength and data activity indicators on the back panel allow for streamlined installations.
GREATER CAPACITY 2x2 MIMO, adaptive modulation and coding (AMC) technology maximizes overall system capacity.
NON-LINE-OF-SIGHT (NLOS) Advanced Orthogonal Frequency Division paired with smart antenna techniques enhances NLOS capabilities.
COMPLETELY WEATHERPROOF IEC IP67 rated for the toughest deployments.
Data Interface 1 RJ45 10/100M LAN Port Radio Access IEEE 802.16e (Wave 2 MIMO)
LED Indicator Power, System Run, LAN Port Activity, X4G RF Signal (6)
Power Supply 48 VDC Integrated PoE
Device Management Management Features * CLI and Telnet Debug Interface * User and admin WEB management interfaces
Auto Provision & Upgrade Management * FTP and HTTP Centralized Firmware Upgrade * Standard TR-069 management with WIB Support * OMA-DM Management Support
Networking IEEE IEEE 802.3 10Base Ethernet IEEE 802.3u Fast Ethernet IEEE 802.1p QoS Priority Protocol IEEE 802.1Q VLAN Tagging Modulation QPSK, 16QAM, 64QAM
Convergence Sublayer IP-CS, Eth-CS, IPv4, IPv6 Pass-Through Network Configuration • DHCP or static IP address assignment • Bridge and Router Operation Support • Built-in DHCP Server for LAN devices • ETH-CS and IP-CS Auto Adaptation
Advanced Data Features • Built-in PPPoE, PPTP, L2TP GRE Clients • VPN Pass-through support (PPTP, L2TP and IPsec) • IP Filtering, Port Forwarding and DMZ • Virtual Server and SPI Firewall
Mechanical, Electrical, and Environmental AUTO PROVISIONG AND UPGRADE Supports TR069 and OMA-DM management interface for auto provisioning and upgrade management.
Dimensions 7.8” x 7.8” x 2.4” (20cm x 20cm x 6cm) Weight 4lbs (1.8kg) Power 48V Integrated PoE Power Adapter
Temperature -40C to +55C
Weatherproofing IEC IP67
Humidity 95% maximum Non-condensing
Vibration and Dust Meets ETSI EN 300 019-1-4 requirements for Class 4.1E
Altitude To 10,000 feet above sea level
ABOUT MERCURY Mercury Networks is a rapidly growing, privately held company with our corporate office in Fort Wayne, Indiana. The Mercury Quantum 6600 product line consists of award-winning family of compact 4G broadband base station and operating software unmatched in flexibility, performance, and total cost of ownership. The technology has been deployed in over 250 commercial networks worldwide. For more information about Mercury, please visit our corporate website at: www.mercurynets.com Mercury Networks, LLC, 6714 Pointe Inverness Way, Suite 230, Fort Wayne, IN 46804 Tel. 888-909-6717
[email protected] Mercury Networks, the Mercury Networks Logo, Mercury Quantum, and PureMAX are trademarks of Mercury Networks, LLC. Information in the document is subject to change without notice. Mercury Networks assumes no responsibility for any errors that may appear in this documents. Copyright © 2015 Mercury Networks, LLC. All rights reserved.
