Transcript
Code No. LIT-1900830 Issued February 26, 2016
Mercury Reader Interface Modules Description Johnson Controls, Inc. now offers Mercury Security Corporation’s high-quality access control hardware products, which can be integrated with the Johnson Controls® P2000 Security Management System (SMS) Version 3.12 and later, providing added flexibility to help you meet the needs of your site’s security requirements, using products from a well-known and time-tested security manufacturer. The following Mercury interface modules are available separately or as part of a pre-configured security control panel assembly housed in a secure enclosure: • • •
CKM-MR51E IP reader interface module CKM-MR50 reader interface module CKM-MR52 reader interface module
CKM-MR51E
The interface is for use in low-voltage, Class 2 circuits only.
The Access Platform CKM-MR51E is a network-connected, singledoor, Power Over Ethernet (PoE) capable interface module that provides an ideal integration solution with the P2000 SMS. Two reader ports support separate in/out readers of all types and technologies, including Wiegand, clock and data, magnetic stripe, keypads, LCD, and biometrics. Auto-addressable and directly managed by the CKM-EP2500, CKM-EP1501, and CKM-EP1502 Mercury intelligent controllers, the CKM-MR51E is capable of elaborate processes and procedures without host intervention.
CKM-MR51E Reader Interface Module Specifications Item Specification Power Input
PoE Power Input 12.95 W, compliant to Institute of Electrical and Electronics Engineers (IEEE) 802.3af (or 10 to 14 VDC power supply)
Power Output
12 VDC at 700 mA, including reader and AUX output Output: Form-C contacts: K1, K2: 5 A at 28 VDC Inputs: 4 supervised, End-of-Line resistors, 1k/1k - ohm, 1% 1/4 W standard
Reader Interface
Reader Power: 12 VDC ± 10% or pass through. (PTC limited 150 mA maximum) Reader LED Output: TTL compatible, high > 3 V, low < 0.5 V, 5 mA source/sink maximum Buzzer Output: Open collector, 5 VDC open circuit maximum, 10 mA sink maximum Reader Data Inputs: TTL-compatible inputs or 2-wire RS-485
Communication
Ethernet, 10Base-T/100Base-TX
Cable Requirements
Power: 18 AWG, 1 twisted pair RS-485: 24 AWG, 120-ohm impedance, twisted pair with shield, 4,000 feet (1,219 m) maximum Alarm Inputs: 1 twisted pair per input, 30-ohm maximum Reader Data (TTL): 18 AWG, 6 conductors, 500 feet (150 m) maximum Reader Data (RS-485): 24 AWG, 120-ohm impedance, twisted pair with shield, 2,000 feet (1,219 m) maximum
Mechanical
Dimension: 5.5 in. W x 2.75 in. L (140 mm W x 70 mm L) Weight: 4.2 oz. (120 g) without bracket
Temperature
Operational: 0°C to 49°C Storage: -55°C to 85°C
Application Notes Built on the Mercury Access Platform, the CKM-MR51E relates the activities of selected system devices to other devices within the system, generating actions and allowing activities to transpire independent of the host. The CKM-MR51E’s support of paired readers enhances the ability to meet installation challenges, such as placing readers at varying heights or distances to accommodate ingress and egress of disabled, vehicle, and foot traffic. These readers can be logically linked together, yet function independently when access identification is presented to either one. When access rights are granted, the same relay functions, as programmed, to unlock the opening. • • • •
Flexible, versatile support of paired readers Network ready Easily installed Applied to a wide range of reader technologies
Humidity
10% to 93% Relative Humidity Non Condensing (RHNC)
Compliance1
United States: UL Listed Subassembly under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada: cUL Listed Subassembly under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003 Europe: CE Mark - Johnson Controls, Inc., declares that this product is in compliance with the EMC Directive Australia and New Zealand: RCM Mark, Australia/NZ emissions compliant
Features • • • • •
CKM-MR52
Technical Specifications
Access Platform CKM-MR51E IP Reader Interface Module
Benefits
CKM-MR50
Multi-facility code support Multi-reader technology support PoE enabled Auto-addressable Transport Layer Security (TLS) encryption support
1. CKM-MR51E must be installed in CKM enclosure to be UL Listed.
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office. www.johnsoncontrols.com Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2016 Johnson Controls, Inc.
1 of 4
Mercury Reader Interface Modules (Continued) Access Platform CKM-MR50 The Access Platform CKM-MR50 is a low-cost, high-performance, single card reader interface module capable of all the I/O needed for controlling a single door. Each CKM-MR50 supports one card reader, two general purpose input monitor points, and two control relays to provide access control and security monitoring through a Mercury EP intelligent controller.
CKM-MR50 Technical Specifications (Part 2 of 2) Item (Continued) Specification Temperature
Operational: 0° to 49°C Storage: -55° to 85°C
Humidity
10 to 93% RHNC 1
Compliance
The CKM-MR50’s reader port supports magnetic stripe, Wiegand, and RS-485 readers, including keypads and integrated keypad readers. Hardware interface and card format settings are downloaded through software commands. With its compact footprint and RS-485 connectivity, the CKM-MR50 can be clustered (multiple devices in an enclosure) or distributed (standalone) to best suit the installation environment.
United States: UL Listed Subassembly under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada: cUL Listed Subassembly under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003 Europe: CE Mark - Johnson Controls, Inc., declares that this product is in compliance with the EMC Directive Australia and New Zealand: RCM Mark, Australia/NZ emissions compliant
The inputs and the relays may be assigned to door-related functions or to general purpose I/O. The inputs support normally open, normally closed, supervised, and non-supervised circuits. End-of-line (EOL) resistance values are configurable. The relays can be configured for fail safe or fail secure operation.
1. CKM-MR50 must be installed in CKM enclosure to be UL Listed.
Application Notes
Access Platform CKM-MR52
The CKM-MR50 is a versatile, reliable interface module for a single door. When connected to a Mercury EP intelligent controller, the CKM-MR50 passes access request and status change information to the intelligent controller for processing. Data and activities from selected system devices pass to other devices in the network, generating actions and activities as they transpire, independent of the host computer. Even when not connected to an intelligent controller, the CKM-MR50 is capable of locally processing access requests based on facility code verification. Up to eight facility codes may be active in each CKM-MR50. Provides all I/O needed for single door control Easily connects to Mercury’s EP intelligent controllers Small size versatility
Features • • •
Application Notes
2 programmable inputs; 2 programmable relay outputs Multi-facility code support Multi-reader technology support
Technical Specifications CKM-MR50 Technical Specifications (Part 1 of 2) Item Specification Electrical
Primary Power: 12-24 VDC +/- 10%, 150 mA maximum 12 VDC at 110 mA nominal 24 VDC at 60 mA nominal
Communication
RS–485, 2-wire, 4,000 feet (twisted pair with shield, Belden® 9841)
Reader Port
1 Reader Port Power: Input voltage pass through Data Card/Keypad, Clock/Data, Data–1/Data–0, or RS-485
LED
One-wire, or two-wire bi-color LED support
Buzzer
Only with one-wire LED
Inputs
2 general purpose (programmable circuit type) 1 dedicated (tamper)
Output Relays
Relay 1: Form–C, 5 A 30 VDC Relay 2: Form–C, 1 A 30 VDC
Dimensions
2.75 in. L x 4.25 in. W x 1.0 in. H (70 mm L x 108 mm W x 25.4 mm H)
With two-wire RS-485 connectivity, the CKM-MR52’s two reader ports support magnetic stripe, Wiegand, and RS-485 readers, including keypads and integrated keypad readers. The inputs and the relays may be assigned to door-related functions or to general purpose I/O. The inputs support normally open, normally closed, supervised, and non-supervised circuits. End-of-line (EOL) resistance values are configurable. The relays can be configured for fail safe or fail secure operation.
Benefits • • •
The CKM-MR52 is a low-cost, high-performance reader interface module that provides all the I/O needed for controlling two doors with auxiliary point control and monitoring. Each unit provides out-bound flexibility for Authentic Mercury EP Series intelligent controllers supporting two card readers, eight general purpose input monitor points, and six control relays.
The CKM-MR52 is a versatile and reliable reader interface module for two doors. When connected to a Mercury EP intelligent controller, the CKM-MR52 passes access requests and status change information to the controller, processing data and activities from selected system devices to other devices in the network, generating actions and activities as they transpire, independent of the P2000 host computer. Even when not connected to an intelligent controller, the CKM-MR52 is capable of locally processing access requests based on facility code verification. Several facility codes may be active in each CKM-MR52.
Benefits • • •
Affordable flexibility to add 2 doors Reliable support of a wide variety of sensors and control technologies Easy to install
Features • •
Multi-facility code support Multi-reader technology support
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office. www.johnsoncontrols.com Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2016 Johnson Controls, Inc.
2 of 4
Mercury Reader Interface Modules (Continued) Technical Specifications
Ordering Information
CKM-MR52 Technical Specifications Item Specification
Part Number
Description
CKM-MR51E
CKM-MR51E Mercury IP reader interface module
CKM-MR50
CKM-MR50 Mercury reader interface module
CKM-MR52
CKM-MR52 Mercury reader interface module
Primary Power
12-24 VDC +/- 10%, 550 mA maximum 12 VDC at 450 mA nominal 24 VDC at 270 mA nominal
Communication RS–485, 2-wire, 4,000 feet (twisted pair with shield, Belden® 9841)
Related Documentation
Reader Port
2 Reader Ports Power: 12 VDC regulated, 125 mA each reader Data Card/Keypad, Clock/Data, Data–1/Data–0, or RS-485
Document Title
Document Number
CKM-MR51E Mercury PoE Module Hardware Installation Manual
Part No. 24-10707-58
Keypad
8-bit Mercury, 8-bit Dorado, 4-bit HID® One-wire bi-color LED support, or two-wire
CKM-MR50 Mercury Terminal Module Hardware Installation Manual
Part No. 24-10707-51
LED Buzzer
Only with one-wire LED 8 general purpose (programmable circuit type) 2 dedicated (tamper and power monitor)
CKM-MR52 Mercury Terminal Module Hardware Installation Manual
Part No. 24-10707-66
Inputs
P2000 Software User Manual
Part No. 24-10685-157
Output
6 relays: Form–C, 5 A 28 VDC
Dimensions
6.0 in. W x 8.0 in. L x 1.0 in. H (152mm W x 203mm L x 25mm H)
Temperature
Operational: 0° to 49°C Storage: -55° to 93°C
Humidity
10 to 85% RHNC
Compliance1
United States: UL Listed Subassembly under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units; FCC compliant to the limits for a Class A digital device, pursuant to Part 15 of the FCC rules Canada: cUL Listed Subassembly under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System; Class A digital apparatus, complies with Canadian ICES-003 Europe: CE Mark - Johnson Controls, Inc., declares that this product is in compliance with the EMC Directive Australia and New Zealand: RCM Mark, Australia/NZ emissions compliant
1. CKM-MR52 must be installed in CKM enclosure to be UL Listed.
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office. www.johnsoncontrols.com Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2016 Johnson Controls, Inc.
3 of 4
Mercury Reader Interface Modules (Continued) P2000 and Mercury Reader Module Integration P2000 Workstation
P2000 Server
CKM-MR51E
Door 1
Wide Area Network IP Network
RS-485
CKM-MR52
Door 1
RS-485
CKM-MR52
Supports 2 Doors
Supports 1 Door
CKM-MR16IN
CKM-MR16IN
16 General Purpose Inputs 2 Relay Outputs
16 General Purpose Inputs 2 Relay Outputs
CKM-MR16OUT
CKM-MR16OUT
16 Relay Outputs
16 General Purpose Inputs 2 Relay Outputs CKM-MR16OUT
16 Relay Outputs Scalable to 64 Doors
Door 1
CKM-MR50
Supports 1 Door
CKM-MR16IN
RS-485
Supports 2 Doors
CKM-MR50
Supports 1 Door
Door 2
CKM-MR52
Supports 2 Doors
CKM-MR50
CKMEP1501
CKMEP1502
CKMEP2500
16 Relay Outputs Scalable to 64 Doors
Scalable to 17 Doors
P2000 and Mercury Reader Module Integration
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office. www.johnsoncontrols.com Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2016 Johnson Controls, Inc.
4 of 4
