Transcript
METABOX assembly tools METABOX layout templates Cabinet Profile
Drawer & front fixing bracket
METATEMP
Drawer front
METATEMP layout templates provide a simple means for locating the cabinet profile and front fixing bracket positions. Included in each kit are five templates for 320N, 320/330M, 320K, 320/330H, and a gallery locator for all series.
e
Each template's height is the minimum cabinet opening size required. To use, place on a side panel and mark the cabinet profile location. Transfer the front fixing bracket location to the drawer front. For linebored cabinets, insert a shelf pin through the template into the system hole.
et pa rts .c om
¨
METATEMP
Layout template kit
Drawer front marking gauges 1.
1
2.
2 3 4 5
4.
1 Standard marking gauge set 2 3
ZML.1500
For METABOX 320M, K, and H
4
ZML.1510
For METABOX 320N
5 1
1
3.
For marking all front fixing bracket positions including drawers with galleries.
2 Marking 3 1. Position gauges onto closed 4 3-sided drawer.
2. Line 5 up the drawer front and mark fixing positions with a light tap on either side.
2 Gallery marking gauge set 3
4ZML.8000.01
(2) rods with adjustable
5
marking gauges
in
3. Attach front fixing brackets over the pin hole marks.
4. Attach INSERTA gallery rail.
C
ab
METABOX drilling template
Ø10 drill bit
For manually boring all the holes necessary to build a METABOX drawer. Drilling template can be used for drawer front, back and bottom. Locates all fixing points. Ø5 (3/16") & Ø10 (3/8") stop collars included. Ø10 (3/8") center punch included.
Marking or boreing drawer front
ZML.0040 Ø5 drill bit Boreing drawer back Boreing drawer bottom
Dimensions in millimeters (inch equivalents as noted) Subject to technical modifications without notice. © 2007
Drilling template set
Ø5 drill bit
33 www.cabinetparts.com
DB-5mm
Ø5 (3/16") drill bit
DB-10mm
Ø10 (3/8") drill bit
METABOX assembly tools MINIFIX For precise positioning of cabinet profile fixing screws.
65.3300
MINIFIX
et pa rts .c om
For METABOX series 320N, M, K, H For runners 230M
Adjustable calibrated drilling gauge For determining cabinet profile positions and pilot boring.
1 2
Drilling gauge can be used with assembled or unassembled cabinets. Locates precise and level fixing points of cabinet profiles. Calibrated metric rail works with DynaPlan for locating profile position.
3 4 5
1 2 3
Includes:
4
1 Clamp assembly
5
2 Templates 3 Calibrated rail, length 1000 (39") 4 Extension drill bit for Ø2.5 (1/8") 5
1 2
1
3
2
4
3
Drilling gauge set
DB-2.5mm
Ø2.5 (1/8") drill bit
5
4 5
1. Determine runner locations from DynaPlan or by manual calculation. 2. Set templates on the bar by the scale 3. Clamp assembly to the cabinet side.
5. Fasten runners to cabinet with wood screws. 6. Add screws to back of runner for added strength as required.
4. Bore Ø2.5mm pilot holes for front and middle mounting positions.
C
ab
in
T65.5000.01
34 www.cabinetparts.com
Dimensions in millimeters (inch equivalents as noted) Subject to technical modifications without notice. © 2007
Machines MINIPRESS P - Deluxe boring and insertion machine
Features: ■ Front adjustable boring distance with digital calibration ■ Pneumatic hold-down clamps ■ Improved boring depth adjustment
■ Tool kit included ■ Dust collection attachment ■ Accepts optional 7 or 8 spindle boring heads
■ Improved positioning stops (4) M53.1053.US
Single phase - 220V power
et pa rts .c om
Laser center line optional.
Three phase - 220V power
M53.1004.US
Three phase - 440V power
M53.1005.US
Laser center line optional.
No laser center line option.
MINIPRESS P - Standard boring and insertion machine
Features:
■ Front adjustable boring distance
■ Improved boring depth adjustment ■ Improved positioning stops (4) ■ Tool kit included
■ Dust collection attachment
■ Accepts optional 7 or 8 spindle boring heads
Single phase - 220V power
M53.1053.UB
Laser center line, hold down clamps and digital calibration optional.
MINIPRESS M - 110V manual boring and insertion machine
Features:
■ 110V power with molded plug (portable)
in
■ Does not require pressurized air ■ 4 positioning stops included
C
ab
■ Tool kit included ■ Dust collection attachment ■ Accepts optional 7 or 8 spindle boring heads 110V power
M52.1056.US
Boring distance stop kit optional. No laser center line option.
MINIDRILL P -Standard boring machine
Features: ■ Front adjustable boring distance
■ Tool kit included
■ Improved boring depth adjustment
■ Dust collection attachment
■ Improved positioning stops (4)
■ Accepts optional 7 or 8 spindle boring heads
Single phase- 220V power
M53.1053.50
Optional hold down clamps, laser center line and digital calibration.
Three phase - 220V power
M53.1004.50
Optional hold down clamps, laser center line and digital calibration.
Three phase - 440V power Optional hold down clamps and digital calibration. No laser center line option. Subject to technical modifications without notice. © 2007
35 www.cabinetparts.com
M53.1005.50
METABOX assembly tools MINIPRESS boring heads 7-spindle
For line boring with the MINIPRESS.
8-spindle
The 7-spindle head bores 7 holes 32mm apart, parallel to the fence. The 8-spindle head bores 8 holes 32mm apart, perpendicular to the fence. Bores for all METABOX front fixing brackets and galleries. MZK.1000.US
7 spindle boring head
et pa rts .c om
MZK.8000.US 8 spindle boring head
Drill bits
Ø5mm drill bit
Drill bits for the MINIPRESS/MINDRILL and boring heads.
Ø10mm drill bit
Installation tools
M01.ZB05.D2
Ø5mm drill bit (right hand)
M01.ZB05.D3
Ø5mm drill bit (left hand)
M01.ZB10.02
Ø10mm drill bit (right hand)
M01.ZB10.03
Ø10mm drill bit (left hand)
For location and insertion of front fixing brackets.
1 Insertion ram 2 1
Three spindle locator enables the positioning of the drawer front without using fence stops.
3 2 Three spindle 4 3 locator 5 4
1 2
MZM.0092.01
3 Knock-in tool 4 5
1 Insertion ram for MINIPRESS 2 for ZSF.1300 and ZSF.1800
Insert front fixing brackets
1
3 1
MZR.2000
3
ZME.1600
4 5
1 4 2
Three spindle locator
2 5 3
2
C
ab
Drill fixing holes
in
5
ZME.1610
3 4 1
Knock-in tool
4 5 2
for ZSF.1300 and ZSF.1800
5 3
Knock-in tool
4
for ZSF.1610
5
36 www.cabinetparts.com
Dimensions in millimeters (inch equivalents as noted) Subject to technical modifications without notice. © 2007
MINISTICK fence stop Enables fast setup for drawer front boreing and front fixing bracket insertion with the MINIPRESS. Eliminates the need for multiple fence stops. 1
Includes:
2
1 LH & RH adj. stick mechanism 3 (2) Bottom drawer stops
3
et pa rts .c om
2 (2) Upper drawer stops
Boreing drawer fronts
1
4
MZS.0040
MINISTICK
4
21
5
32
2
5
1
43
3
54
4
5
5
Essential tool for production boring of drawer fronts when using DynaPlan software.
Inserting front fixing brackets
POZI DRIVER and bits
in
A POZI screwdriver (different from Phillips) is the most crucial tool you can use to assure that full torque is applied to all Blum adjustment screws. POZI screws can be identified by the distinctive “tick” marks located in the center of the screwhead recess.
#2 POZI DRIVER
BIT HOLDER
1/4" magnetic bit holder
ab
POZI DRIVER
POZI BIT #2x1 #2 x 1" POZI bit insert
C
Screws and bumpers Drawer bumpers Cushions drawer closing Self-adhesive back, clear
Deep thread system screws Pilot bore Ø5 (3/16") hole Nickel plated
Deep thread wood screws
606N/P
612TH
FX4041
6 (1/4") dia. x 1.5 (1/16") thk.
661.1150
11.5 (7/16"), #2 POZI
606N
#6 x 5/8", #2 Phillips, nickel plated
SJ5312
10 (3/8") dia. x 3 (1/8") thk.
661.1300
13 (1/2"), #2 POZI
606P
#6 x 5/8", #2 POZI, nickel plated
661.1450
14.5 (9/16"), #2 POZI
662.1150
11.5 (7/16"), #2 POZI, small head
612TH
#6 x 1/2", #2 Phillips, zinc plated
Dimensions in millimeters (inch equivalents as noted) Subject to technical modifications without notice. © 2007
for C15 METABOX assembly
37 www.cabinetparts.com
