Transcript
FIBER LIGHTING
Lighting Equipment
L I G H T I N G
Metal Halide Light Source
FA-100C
FA-100C / FA-150EN
Optical System
Halogen Light Source
E Q U I P M E N T
FA-80MT Durable metal halide lamp is used. Suitable for line sensor lens that needs high light intensity with better luminous efficacy.
74 29.4
FA-80MT (LA-80MT)
56
11
212
FA-100C / FA-150EN is a light source that can be used for multiple purpose. They are compact, lightweight and are suitable for image processing applications. FA-150EN
■ Specification
Mounting screw （M3）
175W
220 200
124 120
φ15
φ20Filter
95
M3
12
12.5
Lamp On/Off controlled by rotary solenoid driven shutter.
FA-100C-S24V FA-150EN-S24V
Light intensity can be controlled by remote switch.
FA-100C-M FA-150EN-M
【Note】 Power for operating the shutter must be provided by the customer as follows: DC12V type : DC12V / over 1.0A DC24V type : DC24V / over 0.5A
115
40
ＣＯＮＴＲＯＬ ＬＡＭＰ ４ ６ ＮＧ ８
5
10 Ｒ
10 Ｒ
Circuit breaker
250V 2.5A
10 ８ ６ ４ ２ ０
６ ０Ｗ
W120×H180×D240mm （Except projection) 3.4kg
８ ０Ｗ
ＷＡ Ｔ Ｔ ＡＧＥ ＣＯＮ Ｔ ＲＯ Ｌ
Ｏ Ｆ Ｆ
Weight
ＡＣ１００Ｖ∼２４０Ｖ
ＭＥ ＳＨ ＣＯＮ Ｔ ＲＯ Ｌ
４ ０Ｗ
External dimensions
15
90 120
210 240
15
Infrared Illumination
HR10−7P−4P
VCTF 3C×0.3mm2
Volume ( with on/off )
AC100-120V/200-240V(Auto change)
Input frequency Power consumption
50/60Hz 130W JCR12V100W-IR Long-life halogen lamp with a infrared mirror Lamp life: 1,000H ※1 DC Output voltage adjustment method Adjustment range: DC3V-12V Lighting adjustment range: 2%-100% Overload circuit: Auto recovery Overheat circuit: Auto shut down and auto recovery Forced-fan cooling IR80 filter -10℃ - +45℃/20%-80%RH (no condensation) AC250V M3A Glass tube-fuse (F=5.2 x 20mm) 1) Lamp On/Off 2) Light intensity adjustment remote function (control DC0V∼+5VMAX) ※2 3) Lamp burnout detection (monitor (LED) signals when the lamp is burned-out or is not making continuity.) W115xH130xD231mm (Except projection) 2.7kg
（RV24YNME20SB103）
Remote function 8
Pin 7 ：Shutter + voltage Pin 14：Shutter − voltage
2000
※Cable length can be up to 10m by customizing.
FA-100IR
Input voltage
Cooling Optical filter Operating temp/humidity Circuit breaker
External dimensions Weight
90
FA-100IR
FA-100IR is infrared illuminator that transmits only the near-infrared frequencies of this halogen lamp. The halogen lamp with infrared reflection mirror and IR80 filter (>800nm penetration) are built-in. Infrared rays 800-1100nm is irradiated without taking out visible light.
Protection circuit
56
56
SEIWA OPTICAL CO.,LTD.
0℃ - +40℃/30%-80% RH (Non condensing)
Light intensity adjustment
ＰＯＷＥＲ
Ｍ
1
Ｍ
14
58
ＣＯＮＴＲＯＬ ＬＡＭＰ ４ ６ ＮＧ ８ ２
HR10-7R-4S
ＰＯＷＥＲ
２
０
57-40140 57-30140 7
ＦＡ−１００Ｃ
Operating temp/humidity
Output type
ＣＯＲＲＥＣＴ
ＦＡ−１００Ｃ
5
■ Connector for shutter
ＣＯＲＲＥＣＴ
Thermal insulated and heat cut filter
Lamp
０
Housing Sockets
Optical filter
Model
74
115
（38）
74 4
Forced-fan cooling
ＰＯＷＥ Ｒ ＯＮ
107
set screw （M3） 84 115
231
85
188
57.5
15
【Example】
【Spectral distribution of FA-100IR】
IR Camera
100
IR 1100 filter
PEIR objective lens Si wafer
（Both side polishedr）
IR 1100 filter
20
Data
29 6.5
Cooling
■ Specification
The shutter operates when the voltage is provided between pins No.7 (+), and No. 14(-) of remote control connector. Effective area 22 17
Short circuit protection: 2.0 A typ (Auto restart) Overheat circuit: Auto shut down and auto recovery
ＮＦＢ
15.5
Remote Control
【Method】
5
Protection circuit
ＬＡＭＰ Ｉ ＮＤ Ｉ ＣＡＴＯＲ
Image Equipment
φ5
Combination use of power adjustment method (40-80W variable) and mesh aperture method (0.5-100% variable).
FA-100IR
Inner Shutter
FA-100C-K FA-150EN-K
DC
Light intensity adjustment
FA-100IR
Relative emissive power（％）
167 Cable length 1.8m
■ Options
F20 series filters (P.33) can be installed.
Output type
※ Average lamp life is calculated from test results and is not guaranteed
※ Average lamp life is calculated from test results and is not guaranteed
Filter Holder
60W metal halide lamp FH60MER, Color temp. 7,400K ※Average life: 3,000H ※Average intensity :Variable 80W, 1,900,000 lx(default)"
130
DC Input variation ±10%, Intensity variation approx ±0.3% (Not applicable when the lamp deterioration) Output voltage variable control 2%-100% DC3.0V∼12.0V DC4.5V∼14.0V Overload circuit: Auto recovery Overheat circuit: Auto shut down and auto recovery Forced-fan cooling Heat-proof filter embedded Heat-proof filter, cold filter embedded -10℃ - +45℃/20%-80% RH (Non condensing) W74×H115×D233mm（Except projection) W126×H126×D227mm（Except projection) 2.2kg 2.3kg
Lamp
80
Output type Lamp intensity stability Light volume control Output voltage range Protection performance Cooling Optical filter Ambient temperature/humidity External dimensions Weight
115W
12
Lamp
Power consumption
Optical Peripherals
JCR15V150W5H, Color temp. 3100K ※Average life: 800H ※Average intensity :600,000lx
JCR12V100W10H, Color temp. 3100K ※Average life: 1000H ※Average intensity :500,000lx
50/60Hz
115
50/60Hz
130W
FA-150EN AC100V
119
FA-100C AC100∼240V
8
Model Input voltage Input frequency Power consumption
FA-80MT
Input frequency
Lighting Equipment
233
AC100∼240V
180
5
Input voltage
95
78
Model
12
115
■ Specification
50
0
400
500
600
700
800
900
1000 1100 1200 1300
Wavelength （nm）
※1 Average lamp life is calculated from test results and is not guaranteed ※2 Refer to remote function explanation
SEIWA OPTICAL CO.,LTD.
59
