Preview only show first 10 pages with watermark. For full document please download

Metal-oxide Varistors Ra Varistor Series (movs)

   EMBED


Share

Transcript

Metal-Oxide Varistors (MOVs) Low Profile / Application Specific Varistors > RA Series RA Varistor Series RoHS Description The RA Series transient surge suppressors are varistors (MOVs) supplied in a low-profile box that features a precise seating plane to increase mechanical stability for secure circuit-board mounting. This feature makes these devices suitable for industrial applications critical to vibration. Their construction permits operation up to 125ºC (ambient) without derating. The RA Series are available in voltage ratings up to 275V VM(AC)RMS, and energy levels up to 140J. These varistors are used in automotive, motor-control, telecommunication, and military applications. Agency Approvals Agency Agency Approval Agency File Number UL1449 E320116 Additional Information See RA Series Device Ratings and Specifications Table for part number and brand information. Features • Lead–free/RoHS compliant parts available (add suffix "x2749") • Wide operating voltage range: VM(AC)RMS: 4 – 275V VM(DC): 5.5 – 369V • Low profile outline with precise seating plane • High energy absorption capability W TM up to 140J • No derating up to 125ºC ambient Datasheet Resources Samples • 3 model sizes available A8, RA16, and RA22 • In-line leads Absolute Maximum Ratings • For ratings of individual members of a series, see Device Ratings and Specifications chart Continuous RA8 Series RA16 Series RA22 Series Units Steady State Applied Voltage: AC Voltage Range (VM(AC)RMS) DC Voltage Range (VM(DC)) 4 to 275 10 to 275 4 to 275 V 5.5 to 369 14 to 369 18 to 369 V 100 to 1200 1000 to 4500 2000 to 6500 A Transients: Peak Pulse Current (ITM) For 8/20µs Current Wave (See Figure 2) Single Pulse Energy Range (Note 1) 0.4 to 23 3.5 to 75 70 to 160 J Operating Ambient Temperature Range (TA) For 10/1000µs Current Wave (WTM) -55 to +125 -55 to +125 -55 to +125 ºC Storage Temperature Range (TSTG) -55 to +150 -55 to +150 -55 to +150 ºC <0.01 <0.01 <0.01 %/ºC 5000 5000 5000 V 1000 1000 1000 MΩ Temperature Coefficient (aV) of Clamping Voltage (VC) at Specified Test Current Hi-Pot Encapsulation (COATING Isolation Voltage Capability) (Delectric must withstand indicated DC voltage for one minute per MIL-STD 202, Method 301) COATING Insulation Resistance CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/04/15 Metal-Oxide Varistors (MOVs) Low Profile / Application Specific Varistors > RA Series RA Series Ratings & Specifications Maximum Rating (125°C) Continuous Part Number † RA8 Series V8RA8 V12RA8 V18RA8 Brand Peak Current (8/20µs) Varistor Voltage at 1mA DC Test Current Max Clamping Volt VC (8/20µs) Typical Capacitance VRMS VDC Energy (10/1000µs) VM(AC) VM(DC) WTM ITM Min VN(DC) Max VC Ip f = 1MHz (mm) (V) (V) (J) (A) (V) (V) (V) (V) (A) (pF) 8R 12R 18R 4 6 10 5.5 8 14 18 (Note 3) 22 26 31 38 45 56 66 81 102 127 153 175 180 200 225 300 330 369 0.4 0.6 0.8 10 (Note 2) 1.0 1.2 1.5 1.8 2.3 3.0 4.0 5.0 6.0 8.0 10.0 11.0 12.0 13.0 15.0 20.0 21.0 23.0 150 150 250 6 9 16.2 8.6 12.5 18 11.2 16 19.8 22 34 42 5 5 5 3000 2500 2000 V22RA8 22R 14 V27RA8 V33RA8 V39RA8 V47RA8 V56RA8 V68RA8 V82RA8 V100RA8 V120RA8 V150RA8 V180RA8 V200RA8 V220RA8 V240RA8 V270RA8 V360RA8 V390RA8 V430RA8 27R 33R 39R 47R 56R 68R 82R 100R 120R 150R 180R 200R 220R 240R 270R 360R 390R 430R 17 20 25 30 35 40 50 60 75 95 115 130 140 150 175 230 250 275 † RA16 Series V18RA16 V22RA16 V27RA16 V33RA16 V39RA16 V47RA16 V56RA16 V68RA16 V82RA16 V100RA16 V120RA16 V150RA16 V180RA16 V200RA16 † V220RA16 † V240RA16 † V270RA16 † V360RA16 † V390RA16 † V430RA16 18R16 22R16 27R16 33R16 39R16 47R16 56R16 68R16 82R16 100R16 120R16 150R16 180R16 200R16 220R16 240R16 270R16 360R16 390R16 430R16 10 14 17 20 25 30 35 40 50 60 75 95 115 130 140 150 175 230 250 275 † † † † † † Specifications (25°C) Transient 14 3.5 18 (Note 3) 50 (Note 2) 22 5.0 26 6.0 31 7.2 8.8 38 45 10.0 56 13.0 66 15.0 81 20.0 102 22.0 127 30.0 153 35.0 175 38.0 180 42.0 200 45.0 225 55.0 300 70.0 330 72.0 369 75.0 250 19.8 22 24.2 47 5 1600 250 250 250 250 250 250 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 24.3 29.7 35.1 42.3 50.4 61.2 73.8 90 108 135 162 184.5 198 216 243 324 351 387 27 33 39 47 56 68 82 100 120 150 180 205 220 240 270 360 390 430 29.7 36.3 42.9 51.7 61.6 74.8 90.2 110 132 165 198 225.5 242 264 297 396 429 473 57 68 79 92 107 127 135 165 205 250 295 340 360 395 455 595 650 710 5 5 5 5 5 5 10 10 10 10 10 10 10 10 10 10 10 10 1300 1100 900 800 700 600 500 400 300 250 200 180 160 150 130 100 90 80 1000 1000 1000 1000 1000 1000 1000 1000 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 4500 16.2 19.8 24.3 29.7 35.1 42.3 50.4 61.2 73.8 90 108 135 162 184.5 198 216 243 324 351 387 18 22 27 33 39 47 56 68 82 100 120 150 180 205 220 240 270 360 390 430 19.8 24.2 29.7 36.3 42.9 51.7 61.6 74.8 90.2 110 132 165 198 225.5 242 264 297 396 429 473 39 43 53 64 76 89 103 123 145 175 205 255 300 340 360 395 455 595 650 710 10 10 10 10 10 10 10 10 50 50 50 50 50 50 50 50 50 50 50 50 11000 9000 7000 6000 5000 4500 3900 3300 2500 2000 1700 1400 1100 1000 900 800 700 550 500 450 © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/04/15 Metal-Oxide Varistors (MOVs) Low Profile / Application Specific Varistors > RA Series RA Series Ratings & Specifications Maximum Rating (125°C) Continuous Brand Part Number Specifications (25°C) Transient VRMS VDC Energy (10/1000µs) Peak Current (8/20µs) Varistor Voltage at 1mA DC Test Current Max Clamping Volt VC (8/20µs) Typical Capacitance VM(AC) VM(DC) WTM ITM Min VN(DC) Max VC Ip f = 1MHz (mm) (V) (V) (J) (A) (V) (V) (V) (V) (A) (pF) V24RA22 24R22 14 18 (Note 3) 100.0 (Note 2) 2000 21.6 24 26.4 43 20 18000 V36RA22 36R22 23 31 2000 32.4 36 39.6 63 20 12000 V200RA22 V240RA22 V270RA22 V390RA22 V430RA22 200R22 240R22 270R22 390R22 430R22 130 150 175 250 275 175 200 225 330 369 6500 6500 6500 6500 6500 184.5 216 243 351 387 205 240 270 390 430 225.5 264 297 429 473 340 395 455 650 710 100 100 100 100 100 1900 1600 1400 1000 900 † RA22 Series † † † † † NOTES: 160.0 (Note 2) 70.0 80.0 90.0 130.0 140.0 1. Average power dissipation of transients not to exceed 0.25W for RA8 Series, 0.60W for RA16 Series, or 1.0W for RA22 Series. 2. Energy ratings for impulse duration of 30ms minimum to one half of peak current value. 3. Also rated to withstand 24V for 5 minutes. 4. 10mA DC Test Current. † Under UL File No. E320116 as a recognized component. CSA approved File No. 91788. Peak Pulse Current Test Waveform PERCENT OF PEAK VALUE Power Dissipation Ratings PERCENT OF RATED VALUE 100 90 80 70 60 50 40 30 20 10 0 -55 Figure 1 50 60 70 80 90 100 110 120 130 140 150 100 50 10 O1 Should power dissipation required is simply the energy (watt-seconds) per pulse times the number of pulses per second. The power so developed must be within the specifications shown on the Device Ratings and Specifications table for the specific device. Furthermore, the operating values need to be derated at high temperatures as shown above. Because varistors can only dissipate a relatively small amount of average power they are, therefore, not suitable for repetitive applications that involve substantial amounts of average power dissipation. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/04/15 T T1 AMBIENT TEMPERATURE ( oC) FIGURE 1. CURRENT, ENERGY AND POWER DERATING transientsCURVE occur in rapid succession, the average O1 = Virtual T = Time F T1 = Virtual T2 = Virtual Example: For 8 s = T1 = Vi 20 s = T2 = Vi 90 Figure 2 TIME T2 FIGURE 2. PEAK PULSE CURRENT TEST W 01 = Virtual Origin of Wave T = Time from 10% to 90% of Peak T1 = Rise Time = 1.25 x T T2 = Decay Time Example - For an 8/20 µs Current Waveform: 8µs = T1 = Rise Time 20µs = T2 = Decay Time 2,000 100 Metal-Oxide Varistors 90(MOVs) 200 100 90 80 V68RA8 70 100V56RA8 100 6090V47RA8 V68RA8 90 5080V39RA8 70 V56RA8 80 4060V33RA8 V47RA8 70 50V27RA8 V39RA8 30 V22RA860 40 V33RA8 50 V18RA8 V27RA8 2030 V22RA8 40 V12RA8 V18RA8 V12RA8 30 V8RA8 10 -3 V8RA8 10 -2 10 20 -3 10 -2 10 V24RA22 10 -1 10 0 10 1 10 2 -1 -2 10 10 0-1 10 10 AMPERES (A) 10 10 10PEAK 10 3 2 3 101 10 PEAK PEAK AMPERES (A) AMPERES (A) 10 2 10 10 3 FIGURE 3. CLAMPING VOLTAGE FOR V8RA8 - V68RA8 FIGURE 7. CLAMPING VOLTAGE FOR V24RA22 - V36RA22 V430RA22 V390RA22 INDEFINITE 200 0.5 10 -2 1 2 10 10 2 50 10 3 20 10 5 2 INDEFINITE 1 V270RA22 V240RA22 V200RA22 0.5 100 1,000 -1 0 10 10DURATION 10 1 (μs) 10 2 IMPULSE PEAK AMPERES (A) 10 3 10,000 10 4 0.2 20 100 FIGURE 10. SURGE C V18RA8 500 V180RA8 1 V180RA8 200 200 V150RA8 V150RA8 V120RA8 V120RA8 0.5 V100RA8 V100RA8 100 100 -3 -2 10 10 -2 0.2 10 -3 10 20 10 SURGE CURRENT (A) V18RA8 - V68RA8 10 4 5 10 6 10 10 2 50 10 3 20 10 5 2 INDEFINITE 1 0.5 V82RA8 V82RA8 10 0 2 100 INDEFINITE 10 -1 1 200 SURGE CURRENT (A) MAXIMUM PEAK VOLTS (V) MAXIMUM PEAK VOLTS (V) 300 1 V8RA8 - V12RA8 1 VOLTAGE 4,000 MAXIMUM CLAMPING 100 SIZECLAMPING MAXIMUM MODEL 5 x 8mm VOLTAGE 2 10 4 5 SIZE 5 x RATING 8mm TO 430V 3,000 82MODEL N(DC) 10 6 o o RATING 82 TO 430V N(DC) TA = -55 C TO 125 oC 10 50 10 o 2,000 TA = -55 C TO 125 C 2,000 V240RA8 10 2 V240RA8 V220RA8 20 V220RA8 V200RA8 3 V430RA8 1,000 V200RA8 10 V430RA8 1,000 900 900 10 V390RA8 V390RA8 800 800 700 700 600 5 600 500 500 V360RA8 V360RA8 400 400 V270RA8 V270RA8 2 300 300 3,000 Figure 4 10 1,000 900 800 5 700 600 500 2 400 FIGURE SURGE CURRENT CURVES- V430RA22 FOR FIGURE 8. 9. CLAMPING VOLTAGE RATING FOR V200RA22 V8RA8 - V12RA8 200 4,000 10 3 500 100 V18RA8 - V68RA8 Pulse Rating Curves 1 FIGURE 8. CLAMPING 200 10 2 20 Figure 5 V82RA8 - V430RA8 10 -2 V8RA8 - V12RA8 1 4 2 MAXIMUM CLAMPING VOLTAGE 10 200 TO 430VN(DC) RATING 10 5 6 10T = -55o C TO 125 o C 10 A 4,000 100 3,000 50 2,000 0.2 10020 10 -3 10 4 FIGURE 3. CLAMPING VOLTAGE FOR V8RA8 - V68RA8 200 10 1 10 2 10 -1 PEAK 10 0AMPERES 10 1 (A) 10 2 100 PEAK AMPERES (A) 10 3 10 4 10 3 10 4 1,000 (μs) IMPULSE DURATION FIGURE 4. CLAMPING VOLTAGE FOR V82RA8 - V430RA8 FIGURE 4. CLAMPING VOLTAGE FOR V82RA8 - V430RA8 FIGURE 9. SURGE CURRENT RATING CURVES FOR V8RA8 - V12RA8 0.2 10,000 20 100 Figure 6 1,000 IMPULSE DURATION (μs) 10,000 FIGURE 10. SURGE CURRENT RATING CURVES FOR V18RA8 - V68RA8 V82RA8 - V430RA8 2,000 SURGE CURRENT (A) 100 V82RA8 - V430RA8 10 3 10 4 10 5 10 6 10 10 2 50 20 10 5 INDEFINITE 2 1 20 100 1,000 10,000 CURRENT (A) 1 2,000 1,000 10 500 200 100 2,000 V82RA16 - V430RA16 10 2 3 10 10 4 10 5 10 6 10 200 10 2 100 50 20 10 INDEFIN 5 1 20 IMPULSE DURATION (μs) FIGURE 11. SURGE CURRENT RATING CURVES FOR V82RA8 - V430RA8 2 1 2 Figure 7 5,000 2 500 2 500 200 1,000 1 1,000 SURGE CURRENT (A) 10 10 -3 V36RA22 300 100 10 -3 FIGURE 6. CLAMPING VOLTAGE FOR V82RA16 - V430RA16 200 24 TO 36VN(DC) RATING TA = -55o C TO 125 o C MAXIMUM PEAK VOLTS (V) MAXIMUM PEAK VOLTS (V) MAXIMUM PEAK VOLTS (V) 200 1,000 900 800 700 600 500 400 Pulse Rating Curves FIGURE 5. CLAMPING VOLTAGE FOR V18RA16 - V68RA16 300 V24RA22 20 V180RA16 200 -3 10 10 -1 10 0 10 1 10 2 10 3 10 4 10 -2 V150RA16 PEAK AMPERES (A) V120RA16 V100RA16 Repetitive Surge Capability for 8mm Parts V82RA16 FIGURE 7. CLAMPING VOLTAGE FOR V24RA22 - V36RA22 100 -3 -2 -1 0 1 10 10 10 10 10 2 10 3 10 10 4 V8RA8 - V12RA8 PEAK AMPERES (A) MAXIMUM CLAMPING VOLTAGE 8 TO 68VN(DC) RATING TA =300 -55o C TO 125 o C MAXIMUM CLAMPING VOLTAGE 200 Figure 3 10 3 TA = -55o C TO 125 o C 400 20 10 2 V390RA16 SURGE CURRENT (A) 100 90 80 70 60 50 40 MAXIMUM PEAK VOLTS (V)(A) SURGE CURRENT 600 V240RA16 V220RA8 V200RA8 Low Profile / Application Specific Varistors > RA Series V430RA16 V36RA22 200 V68RA16 V56RA16 V47RA16 V39RA16 V33RA16 V27RA16 30 V22RA16 V18RA16 Maximum Clamping Voltage for 8mm Parts 20 -3 600 10 CLAMPING 10 -2 10 -1 10 0 10 1 MAXIMUM VOLTAGE V8RA8 - V68RA8 500 PEAK AMPERES (A) 8 TO 68VN(DC) RATING 300 500 80 70 1,000 60 900 800 50 700 600 40 500 V360RA16 400 30 V270RA16 300 1,000 500 CURRENT (A) MAXIMUM PEAK VOLTS (V) 300 400 MODEL SIZE 5 x 8mm 82 TO 430VN(DC) RATING TA = -55o C TO 125 o C 3,000 MAXIMUM PEAK VOLTS ( 18 TO 68VN(DC) RATING TA = -55o C TO 125 o C PEAK MAXIMUMMAXIMUM PEAK VOLTS (V)VOLTS ( 400 2 1 V24RA22 - V36RA 10 10 2 © 2015 Littelfuse, Inc. 3 200 Specifications are 10 subject to change without notice. 4 Revised: 11/04/15 100 10 50 FIGURE 12. SUR V18R 10 5 10 6 Metal-Oxide Varistors (MOVs) Low Profile / Application Specific Varistors > RA Series Maximum Clamping Voltage for 16mm Parts Repetitive Surge Capability for 16mm Parts 10 3 Figure 8 FIGURE 11. SURGE CURRENT RATING CURVES FOR FIGURE 5. CLAMPING VOLTAGE V18RA16 - V68RA16 V82RA8 -FOR V430RA8 10 -3 Figure 10 200 100 50 20 10 INDEFINITE 5 3,000 2,000 100 90 80 70 1,000 900 60 800 700 50 600 40 500 V360RA16 400 30 V270RA16 300 V24RA22 2 1 10 10 2 10 3 10 4 10 5 20 10 INDEFINITE MAXIMUM PEAK VOLTS (V) 10 500 MAXIMUM CLAMPING VOLTAGE 2,000 24 TO 36VN(DC) RATING V82RA16 - V430RA16 TA = -55o C TO 125 o C 1,000 MAXIMUM CLAMPING VOLTAGE MODEL 10 2 3 SIZE 5 x 8mm 500 8210 TO 430VN(DC) RATING 4 o TA =10-55 C TO 125 o C 5 10 200 10 6 V240RA16 100 V220RA8 V200RA8 V430RA16 50 V390RA16 V36RA22 SURGE CURRENT (A) SURGE CURRENT (A) 1,000 200 4,000 2 MAXIMUM PEAK(V) VOLTS (V) MAXIMUM PEAK VOLTS 2,000 1 5 Pulse Figure 9 10 INDEFINITE 5 V82RA16 1,0002 IMPULSE DURATION 10 -1 10 0 10 1 10 2 10 3(μs) 10 4 1 PEAK AMPERES (A) 20 10,000 100 1,000 IMPULSE DURATION (μs) FIGURE 11. SURGE CURRENT RATING CUR V82RA8 - V430RA8 10,000 4,000 V82RA16 - V430RA16 MAXIMUM CLAMPING VOLTAGE 3,000 200 TO 430VN(DC) RATING V24RA22 - V36RA22 TA = -55o C TO 125 o C 2,000 5,000 1 10 6 2,000 2 V430RA22 V390RA22 1,000 1,000 10 900 800 500 700 600 500 200 400 100 300 50 V270RA22 200 V240RA22 20 V200RA22 INDEFINITE 10 200 4,000 100 3,000 SURGE CURRENT (A) MAXIMUM PEAK VOLTS (V) 50 2,000 2 10 3 20 1,000 10 900 800 5 700 600 500 400 2 300 1 1 MAXIMUM CLAMPING VOLTAGE 2 10 4 5 200 TO 430VN(DC) RATING 10 6 10TA = -55o C TO 125 o C 10 5,000 1 2 V20 10 2,000 V82RA16 - V430RA16 1,000 500 10 2 3 10 10 4 200 5 10 6 10100 50 20 10 INDEFINITE 5 INDEFINITE 200 0.5 10 -2 100 SURGE CURRENT (A) 100 50 20 2 10 10 4 5 10 6 10 10 2 10 3 © 2015 Littelfuse, 10Inc. Specifications are subject to change without notice. Revised: 11/04/155 2 INDEFINITE V18RA8 - V68RA8 10 2 50 10 3 20 10 5 2 INDEFINITE 0.5 1,000 10 -1 10 0 10 1 10 2 IMPULSE PEAKDURATION AMPERES(μs) (A) 1 10 10 4 5 10 6 10 1 V270RA22 V240RA22 V200RA22 10 3 10,0004 10 500 200 2 100 FIGURE 8. 9.CLAMPING VOLTAGERATING FOR V200RA22 FIGURE SURGE CURRENT CURVES- V430RA22 FOR V8RA8 - V12RA8 V8RA8 - V12RA8 1 200 V430RA22 V390RA22 10 3 FIGURE 13. SURGE CURRENT RATING CURVES FOR V82RA16 - V430RA16 500 V8RA8 - V12RA8 10 2 0.2 100 20 -3 10 10 4 A) V24RA22 - V36RA22 Rating Curves FIGURE 6. CLAMPING VOLTAGE FOR V82RA16 - V430RA16 SURGE CURRENT (A) V18RA16 - V68RA16 10 2 20 2 2,000 10 10 3 2 10 4 1,000 10 51 1 500 1 200 1 100 1 50 1 20 10 2 20 V180RA16 200 23 100 -3 -2 -1 0 1 2 4 5 10V150RA16 10 10,000 10 10 1020 10 10 110 4 100 1,000 100 1,000 10 10 -3 10 010,00010 1 10 2 10 3 10 -2 5 10 -1 V120RA16 20 100 1,00 PEAK AMPERES (A) PEAK AMPERES (A) (μs) IMPULSE DURATION IMPULSE DURATION V100RA16 (μs) 2 ( V82RA16 2 IMPULSE DURATION 100 20 20 VOLTAGE 100 1,000 10,000 FIGURE 7. CLAMPING VOLTAGE FOR V24RA22 - V36RA22 FIGURE 8. CLAMPING FOR V200RA22 - V430RA22 3 FIGURE 13.10SURGE CURRENT RATING CURVES FOR 10 0 FIGURE 14.10 4SURGE CURRENT RATING CURVES FOR 10 2 10 -3 10 -1 10 1 10 2 10 3 10 -2 FIGURE 15. IMPULSE DURATION (μs) SURGE CURRENT RATING CURVES F V82RA16 - V430RA16 V24RA22 - V36RA22 PEAK AMPERES (A) Figure 11 2 20 10 1 (A) 10 3 10 4 10 5 10 6 50 FIGURE 12. SURGE CURRENT RATING CURVES FOR FIGURE 6. CLAMPING VOLTAGE FOR V82RA16 - V430RA16 V18RA16 - V68RA16 V82RA16 -300 V430RA16 5,000 10 -2 V8 SURGE CURRENT (A) V68RA16 20 V56RA16 V47RA16 10 V39RA16 5 INDEFINITE V33RA16 V27RA16 30 V22RA16 2 V18RA16 1 20 100 1,000 20 1 10 -3 10 -2 10 -1 10 0IMPULSE 10 DURATION 10 2 (μs) PEAK AMPERES (A) 100 V430RA16 1,000 900 50V390RA16 800 700 600 20 500 V360RA16 400 V270RA16 10 300 INDEFINITE 5 V180RA16 200 V150RA16 2 V120RA16 V100RA16 1 20 100 10,000 100 SURGE CURRENT (A) 50 200 10 2 SURGE CURRENT (A) 100 90 80 70 60 50 40 2,000 10 3 10 4 10 5 10 6 V18RA16 - V68RA16 10 3 10 4 2,000 5 10 1 6 10 1,000 V240RA16 2 V220RA8 500 V200RA8 10 200 10 2 100 SURGE CURRENT (A) 200 MAXIMUM 1,000 CLAMPING VOLTAGE 1 MODEL SIZE25 x 8mm 82 TO 430V 500 N(DC) RATING 10125 o C TA = -55o C TO 3,000 V82RA8 - V430RA8 MAXIMUM PEAK VOLTS (V) MAXIMUM PEAK VOLTS (V) 300 4,000 2,000CLAMPING VOLTAGE MAXIMUM 1 RATING 18 TO 68VN(DC) 1,000 TA = -55o C TO 125 o C 2 500 10 200 10 2 100 SURGE CURRENT (A) 600 500 400 V18RA16 - V68RA16 SURGE CURRENT (A) V18RA16 - V68RA16 V18RA8 - V68RA8 0.2 20 100 1,000 IMPULSE DURATION (μs) FIGURE 10. SURGE CURRENT RATING CURVES FOR V18RA8 - V68RA8 10,000 FIGURE TA = -55o C TO 125 o C 500 2 2,000 82 TO 430VN(DC) RATING TA = -55o C TO 125 o C 10 3 10 4 10 5 10 6 V430RA16 V390RA16 10 2 MAXIMUM PEAK VOLTS (V) 200 Metal-Oxide Varistors (MOVs) 10 200 SURGE CURRENT (A) MAXIMUM PEAK VOLTS (V) 300 10 10 5 10 6 10 V240RA16 V220RA8 V200RA8 SURGE CURRENT (A) 400 200 10 2 100 1,000 Specific Varistors > RA Series 50 Low Profile / Application 900 50 100 90 80 70 60 50 40 V68RA16 V56RA16 V47RA16 V39RA16 V33RA16 V27RA16 30 V22RA16 V18RA16 Maximum Clamping Voltage for 22mm 20 -3 10 10 -2 10 -1 10 0 10 1 PEAK AMPERES (A) V24RA22 - V36RA22 100 20 10 5 INDEFINITE 800 700 600 500 V360RA16 400 V270RA16 300 V180RA16 V150RA16 V120RA16 1 V100RA16 1,000 20 100 10,000 V82RA16 Parts 100Repetitive Surge Capability for IMPULSE-3DURATION (μs) -1 2 3 -2 0 10 10 10 10 10 10 1 10 2 10 FIGURE 11. SURGE CURRENT RATING CURVESPEAK FORAMPERES (A) V24RA22 - V36RA22 20 10 5 200 2 FIGURE 5. CLAMPING VOLTAGE FOR V18RA16 - V68RA16 INDEFINITE 2 1 20 22mm Parts 10 3 10 4 100 1,000 IMPULSE DURATION (μs) FIGURE 12. SURGE CURRENT RATING CURVES FOR V82RA8 -FIGURE V430RA8 V18RA16 - V68RA16 6. CLAMPING VOLTAGE FOR V82RA16 - V430RA16 4,000 5,000CLAMPING VOLTAGE 2,000 CLAMPING VOLTAGE MAXIMUM MAXIMUM 1 1 3,000 2 V82RA16 - V430RA16 V24RA22 - V36RA22 200 TO 430VN(DC) RATING 24 TO 36VN(DC) RATING 2 1,000 o o 2,000 TA = -55o C TO10125 o C 200 TA = -55 C TO 125 C 2,000 1,000 10 2 3 4,000 1,000 10 500 10 6 1 10 2 1 V18RA16 MAXIMUM CLAMPING VOLTAGE 10 2- V68RA16 V82RA8 - V430RA8 4 10 3 MODEL500 SIZE 5 x 8mm 500 10 5 4 3,000 10 3 10 200 10V430RA22 10 6 82 TO 430VN(DC) RATING 2 5 10 V390RA22 1,000 10 6 TA = -55o C TO 125 o C 100 10 900 200 200 10 2 4 2,000 10 3 10 10 100 90 800 10 4 80 700 V240RA16 5 100 10 5 10 100 600 50 10 2 70 V220RA8 10 650 500 60 V200RA8 50 V36RA22 V430RA16 1,000 400 900 V390RA16 50 20 800 20 300 700 40 20 10 600 INDEFINITE INDEFINITE 10 V270RA22 V24RA22 500 200 V240RA22 30 V360RA16 10 5 5 400 V200RA22 INDEFINITE V270RA16 5 INDEFINITE 300 2 2 20 20 100 1,000 10,000 1,000 10,000 100 -3 -3 V180RA16 10 0 100 10 1 10 2 10 3 10 4 10 -2 20 10 -1 10 10 -1 10 0 10 1 10 2 10 3 10 -2 10 4 20010 2 IMPULSE IMPULSE V150RA16 PEAK AMPERES (A) DURATION (μs) PEAK AMPERES (A) DURATION (μs) Figure 12 V120RA16 1 Figure 14 20 CURVES FOR 100 1,000 10,000 FIGURE 13.VOLTAGE SURGE RATING FIGURE 14. SURGE CURRENT RATING CURVES FOR FIGURE 7.1,000 CLAMPING FORV82RA16 V24RA22 - V36RA22 FIGURE 8. CLAMPING VOLTAGE FOR V200RA22 - V430RA22 0 100 10,000CURRENT V100RA16 IMPULSE DURATION (μs) V82RA16 - V430RA16 V24RA22 - V36RA22 IMPULSE 100 DURATION (μs) 2 3 -3 -2 -1 0 1 2 3 4 10 10 10 10 10 10 10 10 10 RE 11. SURGE CURRENT- V430RA22 RATING CURVES FORPEAK AMPERES (A) FIGURE 12. SURGE CURRENTV200RA22 RATING CURVES FOR - V430RA22 V200RA22 V82RA8 - V430RA8 V18RA16 - V68RA16 500 200 68RA16 FIGURE 6. CLAMPING VOLTAGE FOR V82RA16 - V430RA16 V8RA8 V12RA8 V18RA8 - V68RA8 1 1 100 2 10 4 5 4,000 200 10 4 5 10,000 2 2,000 10 6 MAXIMUM CLAMPING VOLTAGE 10 6 1 1 RA16 - V430RA16 V200RA22 - V430RA22 3,000 V24RA22 - V36RA22 2 10 10200 TO 2 50 5,000 430VN(DC) RATING 10 10 100 10 1,000 o C TO 125 o C T2A = -5510 2 10 2 3 2,000 10 2,000 10 10 500 10 6 50 20 10 4 10 2 1,000 10 3 10 3 10 5 20 200 10 3 10 6 500 10 V430RA22 V390RA22 1,000 10 900 5 100 10 4 200 800 700 5 100 5 50 10 600 50 500 2 2 400 INDEFINITE 20 20 1 1 INDEFINITE 300 INDEFINITE 10 10 INDEFINITE 0.5 V270RA22 0.5 5 200 5 V240RA22 V200RA22 2 0.2 0.2 2 20 100 1,000 10,000 20 100 1,000 10,000 1 20 100 1,000 10,000 10,000 100 3 4 (μs) IMPULSE DURATION (μs) 20 IMPULSE DURATION 100 1,000 10,000 0 10 10 10 -3 10 -1 10IMPULSE 10 1DURATION 10 2 (μs)10 3 10 -2 10 4 IMPULSE DURATION (μs) PEAK AMPERES (A) Figure 15 2,000 FIGURE 8. CLAMPING VOLTAGE FOR V200RA22 - V430RA22 V8RA8 - V12RA8 V24RA22 - V36RA22 SURGE CURRENT (A) FIGURE 10. SURGE CURRENT RATING CURVES FOR FIGURE V18RA8 15. SURGE CURRENT RATING CURVES FOR V200RA22 - V430RA22 - V68RA8 SURGE CURRENT (A) 10 3 20 10 5 2 INDEFINITE 1 0.5 10,000 0.2 20 100 1,000 IMPULSE DURATION (μs) 100 50 20 INDEFIN 10 20 FIGURE 15. SURGE CUR 10 2 50 200 2 10 6 10 500 1 NOTE: If pulse ratings are exceeded, a shift of VN(DC) (at specified current) of more than ±10% could500 result. This type of shift, which normally results in a decrease of VN(DC), may V18RA8but - V68RA8 result in the device not specifications, it does not prevent 1 meeting the original published 4 200 continuing to function, the device from and to 10 provide 2 10 5 ample protection. 100 1,000 5 SURGE CURRENT (A) SURGE CURRENT (A) SURGE CURRENT (A) MAXIMUMSURGE PEAK VOLTS (V) (A) CURRENT V12RA8 9. SURGE CURRENT RATING CURVES FOR Figure FIGURE 13 FIGURE 14. SURGE CURRENT RATING CURVES FOR 1 5,000 SURGE CURRENT (A) MAXIMUM PEAK VOLTS (V) SURGE CURRENT (A) 10,000 Pulse Rating Curves RVES FOR 36RA22 OR SURGE CURRENT (A) MAXIMUM PEAK MAXIMUM PEAK VOLTS (V) VOLTS (V) 300 10,000 FIGURE 10. SURGE CURRENT RATING CURVES FOR V18RA8 - V68RA8 © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/04/15 Metal-Oxide Varistors (MOVs) Low Profile / Application Specific Varistors > RA Series Wave Solder Profile Pre Heat Pb – Free assembly - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp–up rate (Liquidus Temp (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 250+0/-5°C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Lead–free Profile 300 Maximum Wave 260C 250 TEMPERATURE (ºC) Reflow Condition 200 150 100 50 0 0 0.5 1 Figure 16 1.5 2 2.5 3 3.5 4 TIME(MINUTES) Non Lead–free Profile 300 Maximum Wave 240C TEMPERATURE (ºC) 250 200 150 100 50 0 0 0.5 1 Figure 17 1.5 2 2.5 3 3.5 4 TIME(MINUTES) Environmental Specifications Physical Specifications Operating/Storage Temperature -55°C to +125°C / -55°C to +150°C Lead Material Tin–Coated Humidity Aging +85°C, 85% RH, 1000 hours +/-10% Voltage Soldering Characteristics Solderability per MIL–STD–202, Method 208 Thermal Shock +85°C to -40°C 10 times +/-10% Voltage Insulating Material Cured, flame retardant epoxy polymer meets UL94V–0 requirements. Solvent Resistance MIL–STD–202, Method 215 Device Labeling Moisture Sensitivity Level 1, J-STD-020 Marked with LF, voltage, amperage rating, and date code. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/04/15 Metal-Oxide Varistors (MOVs) Low Profile / Application Specific Varistors > RA Series Product Dimensions (mm) D MAX Y n MIN A MAX SEATING PLANE 5.0 MIN (0.197 MIN) X Øb ±0.05 ( 0.002) E MAX Z MIN 0.5 MAX OFFSET (0.020 MAX) e 1.0 ( 0.039) SYMBOL RA8 Series RA16 Series RA22 Series A (max.) 8.85 (0.348) 15.1 (0.594) 19.1 (0.752) D (max.) 11.45 (0.450) 19.7 (0.776) 25.5 (1.004) e±1 5 (0.197) 7.5 (0.295) 7.5 (0.295) E (max.) 5.2 (0.205) 6.3 (0.248) 6.3 (0.248) n (max.) 0.7 (0.027) 0.7 (0.027) 0.7 (0.027) Øb ± 0.05 0.635 (0.025) 0.81 (0.032) 0.81 (0.032) Weight (typical) 1 Gram 3.4 Grams 4.4 Grams X 2.2 (0.087) 2.2 (0.087) 4.4 (0.173) Y (Typ.) 3.1 -/+ 0.5 (0.122 -/+ 0.02) 6 -/+ 1 (0.236 -/+ 0.04) 8.9 -/+ 1 (0.35 -/+ 0.04) Z (min.) 0.4 (0.015) 0.8 (0.031) 0.8 (0.031) NOTES: Dimensions are in mm, with dimensions in inches in parentheses. Inches for reference only. Part Numbering System The RA Series is supplied in bulk pack. V 200 RA 16 X2749 Littelfuse Varistor Nominal Varistor Voltage OPTIONAL SUFFIX: X2749: Lead-Free and RoHS Compliant Option Device Size Series Designator © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/04/15