Transcript
FIBER OPTIC TECHNOLOGY CALIBRATION LABORATORY
Metalic SFP Transceivers Description: OPTOKON’s Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the Gigabit Ethernet standards as specified in IEEE 802.3. By default it is a full duplex device in preferred master mode with automatic crossover detection. The 10/100/1000 BASE-T operation requires an SGMII interface and 1000BASE-T module works with SERDES interface. Compact RJ-45 connector with fully metal enclosure, for lower EMI is RoHS compliant and lead-free.
Features
Up to 1.25 Gbit/s bi-directional data links Hot-pluggable SFP footprint Low power dissipation(1.05 W typical) Compact RJ-45 connector assembly Fully metal enclosure, for lower EMI RoHS compliant and lead-free Single +3.3 V power supply 1.25 Gigabit Ethernet over Cat 5 cable
Ordering codes Part number:
Speed [Mbps]
Distance [m]
Auto negotiation
Link indicator
Sync-E
Temperature
RJ-LP-DG-XX RJ-LP-DFGA-XX RJ-LP-DGA-XX RJ-LP-DFGAL-XX RJ-LP-DFGALS-XX
1000 10/100/1000 1000 10/100/1000 10/100/1000
100 100 100 100 100
No Yes Yes Yes Yes
No No No Yes Yes
No No No No Yes
D, E, I D, E, I D, E, I D, E, I D
1
Temperature: OPTOKON is always trying to satisfy as much market demand as possible and with this in mind, almost all OPTOKON SFP transceivers are manufactured in the commercial (D), extended (E) and industrial (I) temperature ranges to provide you all possibilities you need for your application.
1
Code
Temperature
D E I
0 °C to + 70 °C -10°C to + 80 °C -40°C to + 85 °C
Table 1: temperature specifications.
Replace the “D” in part number with desired temperature code (i.e. RJ-LP-IG for 1G SFP, -40°C to +85°C) ACT_04-07_EN Apr 11, 2014 is registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective owners. OPTOKON, a.s. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability. OPTOKON a.s., Cerveny Kriz 250, 586 01 Jihlava, Czech Republic tel. +420 564 040 111, fax +420 564 040 134, WWW.OPTOKON.COM,
[email protected]
