Transcript
Section #7 Pictorial Table Of Contents Introduction To Accessories
How To Order
End Caps
Self Tapping Screws
T-Slot Covers
T-Slot Tread Strips
Laminated Table Tops & Kits
Page 916
Page 917
Pages 918-919
Page 918
Pages 920-921
Page 921
Page 922
AkroBins®
Cart Guard®
Cart Guard® Corners
Tool Hangers
Spring Snap Hook
Gravity Roller Mounting Block
Rubber Bumpers
Page 923
Page 924
Page 925
Page 926
Page 927
Page 927
Page 928
Nylon T-Slot Nut
Plastic Document Holders
Label Holders
Wiring Duct
Wire Ties
Cable & Tube Clips
Tube and Wire Clamps
Page 928
Page 929
Page 929
Page 930
Page 930
Page 931
Page 932
Cable Mount Blocks
Pressure Manifold Plates
Anodize Breaker
Grounding Terminal
Power Strips
T-Slot Velcro® Fastener
Push-In Fastener
Page 933
Pages 934-935
Page 936
Page 936
Page 937
Page 938
Page 938
• Add air and fluid options to your frame • Ergonomic and adjustable • Easy to add accessories • Build your own: Workstations Inventory Systems Pressure Manifolds Work Benches QC Stations Shelving Storage and lots more!
Phone: 260-248-8030
•
Accessories
Metric
7
Color Stuff!
Fax: 260-248-8029
•
www.8020.net
915
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Accessories
Introduction to Accessories Section 7 contains all the information needed for adding accessories to your application. The components contained in this section can be used to complete your project and enhance your design. End caps and T-slot covers enclose the ends of your profile and cover the T-slots. They fit all of our T-slotted profiles and are available in different styles and many colors. Table tops, which include a bumper edge, increase the flexibility of any workstation or desk. Cart Guard® can be used to guard your carts! Various colors available. AkroBins® and shelf bins are an economical way to store and display parts and components in a variety of sizes and colors. We have accessories of all kinds, including tool hangers and tube clamps. Use the tool hanger to hang air tools, cable reels or transport cables. Single, double and stackable tube clamps attach your tubes and wires of all sizes. Manifold plates are compatible with most fluids and gases. Select from our 25 Series and 40 Series T-slotted profiles to fit your design. If you need a custom manifold plate, check out our structural shapes, pages 695-709, and call 80/20® or your local distributor for a custom machining quote.
Considerations • Custom designs to fit your space constraints • Workstation and desk components to meet the demands and needs of the job at hand • Aesthetically pleasing
7
• End or side mounts for manifold plates, even CUSTOM plates (our specialty) • Accessories to compliment your design even more • COLORS! COLORS! COLORS! • One-stop shopping!…only at 80/20®
Legend for Icons Design files for this part can be found on the 80/20® DVD (Design Software)
This part can use double economy T-nuts. See page 757.
This part is available in several colors
916 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
How to Order 80/20® Accessories Ordering accessories is a simple process; just list the part number, quantity, and a brief description of the accessory (see example order below). When you purchase accessories that require cut-to-length services, please include those charges with the complete order. Many parts have color choices; be sure to indicate the desired color when ordering. If ordering a manifold that mounts on the side, please send a drawing of the profile with your order. And remember to order an aluminum container hanger for each AkroBin® ordered.
Accessories
Metric
How To Order Shipping Method: Ordered By:
Complete Address & Shipping Method Required... NO P.O. Box Part Number
Quantity
Length
1
25-2525 40-4040-Lite-4m 40-8016 40-8080
2 5 4 4
469.9mm 4m 1016.0mm 914.4mm
2
CM01-051006
2
65-2611
1
4
65-7150 25-7042 25-7005 40-7023 40-7030 40-7050 40-7029 25-7311
1 4 2 4 4 64 4 2
Cut plastic panels all sides < -1220mm 25 Series anchor fastener counterbore Cut-to-length for 25-2525 Cut-to-length for 40-8016 Cut-to-length for 40-8080 40 Series drill access hole 5/16-18 tap service for 40-8016 Anchor fastener notch for 25 Series
5
40-3891 25-2114 40-2050 25-3896 40-1982 25-4132 75-3404
32 16 8 4 5 12 24
40 Series M8 bright zinc end fastener w/ screw Gray T-Slot covers for 25 Series End caps for 40-8080 25 Series anchor fasteners 40 Series M8 bright zinc double economy T-nut 2 hole inside corner gusset bracket 25 Series M6 BHSCS & economy T-nut
3
.63 sm
Ship To: Customer: Address: City / State: Attention: Tag: Description / Machining
Price/UOM
Ext. Price
25-7042 in A both ends Full length profile 40-7029 one end 40-7050 style MG in W, X both ends
$0.01 $80.00 $0.14 $0.06
$7.89 $400.00 $554.74 $230.43
Custom bracket per drawing #1
$23.00
$46.00
$111.95
$70.53
$10.50 $2.25 $1.95 $2.90 $2.60 $1.95 $15.20 $0.53
$10.50 $9.00 $3.90 $11.60 $10.40 $124.80 $60.80 $1.06
$1.65 $3.45 $1.85 $3.10 $0.84 $3.95 $0.45
$52.80 $55.20 $14.80 $12.40 $4.20 $47.40 $10.80
6mm bronze polycarb 1 @ 457.2mm x 1016mm w/ 25-7311 per drawing
TOTAL
7
$1739.25
NOTE: Prices shown for illustration use only. Contact your distributor for a personalized quote.
Special Instructions: Must be delivered for assembly by Friday!!!
1 - Profiles = Pages 640-694 • 2 - Custom Parts = Pages 695-710 • 3 - Panels = Pages 831-914 4 - Machining Services = Pages 1025-1078 • 5 - Accessories & Tools = Pages 915-938 & 1015-1024
Phone: 260-248-8030
•
Fax: 260-248-8029
•
www.8020.net
917
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Accessories
End Caps • 25 and 40 Series compatible • Can be mounted with M6 or M8 screws or self-tapping screws (see below). See page 1029-1030 for tapping service • Made of molded black ABS • For use with T-slotted profiles • Gives your project the finishing touch Push-In Fasteners Included
Part No. 25-2015 25-2025 25-2028 40-2030 40-2033 40-2035 40-2045 40-2050 25-2015-Plain 25-2025-Plain 25-2028-Plain 25-2030-Plain 25-2035-Plain 25-2045-Plain 25-2050-Plain
Description 25-2525 End Cap 25-2550 End Cap 25-5050 End Cap 40-4040/40-4040 Lite End Cap 40-4030-Lite End Cap 40-4045-Lite End Cap 40-4080/40-4080 Lite End Cap 40-8080 End Cap 25-2525 Plain End Cap 25-2550 Plain End Cap 25-5050 Plain End Cap 40-4040/40-4040 Lite Plain End Cap 40-4045 Lite Plain End Cap 40-4080/40-4080 Lite Plain End Cap 40-8080 Plain End Cap
Size (mm) 25 x 25 x 3.0 25 x 50 x 3.0 50 x 50 x 3.0 40 x 40 x 4.5 40 x 40 x 4.5 1/4 Round 40 x 40 x 4.5, 45º 40 x 80 x 4.5 80 x 80 x 4.5 25 x 25 x 3.0 25 x 50 x 3.0 50 x 50 x 3.0 40 x 40 x 4.5 40 x 40 x 4.5, 45º 40 x 80 x 4.5 80 x 80 x 4.5
kg. .002 .005 .009 .007 .006 .006 .014 .030 .002 .005 .009 .007 .006 .014 .030
Self-Tapping Screws for Use with End Caps
7
• Secure end caps without machining • Button head provides finished look • Tri-lobe (thread rolling) screws provide a clean, strong thread and drive easier than other selftapping screws C
B
C
B
Tri-lobe Thread
A
New!
A Part No. 25-3266 25-3766 40-3267 40-3767
Type Self-Tapping Metric
Finish Black Bright Black Bright
Thread #12-24 #12-24 M7 x 1.0 M7 x 1.0
A 9.52 9.52 9.52 9.52
B 5.38 5.38 6.88 6.88
C 11.10 11.10 11.10 11.10
kg. .0027 .0027 .0036 .0036
Compatibility Code 6-25 6-25 8-40 8-40
918 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
End Caps
Nylon, Black, Plain
Accessories
Metric
• Push-on, no fastener required • Finish off your assemblies by installing end caps on exposed T-slot ends
New!
Part No. 12305 12306 12307 12271 12302 12303 12258 12260 12261 12290 12298 40-2037 40-2039 40-2043 12262 12259 12269
L x W (mm) 20 x 20 20 x 40 40 x 40 30 x 30 30 x 60 60 x 60 45° - 40 x 40 40 x 40 40 x 80 40 x 120 80 x 160 30° - 40 x 40 x 4.0 45° - 42 x 59 x 4.0 60° - 44 x 77 x 4.0 45 x 45 45 x 90 90 x 90
Slot Tab
kg. .0015 .0023 .0045 .0035 .0077 .0154 .0015 .0035 .0100 .0204 .0585 .0390 .0590 .0780 .0100 .0195 .0513
5.00 8.00 – 8.00
– 10.00 –
Compatibility Code* 5-20 8-30
8-40 8-40 (40-4093 Profile) 8-40 (40-4094 Profile) 8-40 (40-4096 Profile) 10-45
7
Screw-On End Caps Nylon, Black, Plain
• M4 x 12mm FHSCS spreads pin to secure end cap • No tap in profile end required
Part No. 12279 12283 12286 12287
L x W (mm) 30 x 60 45 x 45 45 x 90 90 x 90
Slot Tab 8.00 10.00
Hardware Required (2) 11-4712 (1) 11-4712 (2) 11-4712 (4) 11-4712
kg. .0073 .0095 .0172 .0340
Compatibility Code* 8-30 10-45
* See Compatibility Code information on page 833.
Phone: 260-248-8030
•
Fax: 260-248-8029
•
www.8020.net
919
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Accessories
* See Compatibility Code information on page 833.
Standard T-Slot Covers • Stock length =1841.50mm • OSHA friendly • Cover wires and tubes in T-slots • Makes a great dust cover for T-slots • Available in black, gray and high-visibility yellow
Part No. 25-2112 25-2113 25-2114 40-2109 40-2110 40-2111
Description Safety Yellow T-Slot Cover - 25 Series Black T-Slot Cover - 25 Series Gray T-Slot Cover - 25 Series Safety Yellow T-Slot Cover - 40 Series Black T-Slot Cover - 40 Series Gray T-Slot Cover - 40 Series
kg. .096 .096 .096 .121 .121 .121
T-Slot Covers
Polypropylene, Black • 20, 30 and 45 series compatible
7
• Sold in standard lengths of 2m (78.74”)
Part No. 12004 14193 12013 12005
Color Black Natural
A 5.00 8.20 10.20 5.00
B 6.30 8.80 12.80 6.30
C 6.00 10.20 13.70 6.00
kg. .018 .050 .068 .018
Compatibility Code* 5-20 8-30 10-45 5-20
920 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Economy T-Slot Covers • 25, 40 and 45 Series compatible
Accessories
Metric
* See Compatibility Code information on page 833.
• Cover wires and tubes in T-slots • Cuts easily with metal shears • Stock length = 1841.50mm • Presses easily into T-slots • Available in red, blue, black, gray, yellow and orange Part No. 25-2816 25-2817 25-2818 25-2819 25-2820 25-2821 40-2822 40-2823 40-2824 40-2825 40-2826 40-2827 14107 14108 14110 14121 14123
Description Orange - 25 Series Blue - 25 Series Red - 25 Series Safety Yellow - 25 Series Black - 25 Series Gray - 25 Series Safety Yellow - 40 Series Black - 40 Series Gray - 40 Series Red - 40 Series Blue - 40 Series Orange - 40 Series Black - 45 Series Yellow - 45 Series Gray - 45 Series Blue - 45 Series Red - 45 Series
mm (in)
kg.
Compatibility Code*
.024
6-25
.051
8-40
.118
10-45
1841.50 (72.5)
2000.00 (78.7)
T-Slot Tread Strip NBR rubber, Black
• Press-fits in any 8mm wide T-slot
7
• Anti-slip ribbed surface on top side • Sold by the meter, maximum length 20m
Part No. 12006
Slot Tab 8.00
A 31.10
B 13.10
Phone: 260-248-8030
C 8.50
•
D 12.00
E 4.00
kg/meter .2087
Fax: 260-248-8029
Length Sold by the meter
•
Compatibility Code* 8-30, 8-40
www.8020.net
921
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Accessories
Laminated Table Tops • Quality 31.75mm high-pressure laminate table tops • The perfect choice for completing your custom workstation • Available in gray color • 3mm PVC bumper edge coordinates with table color
Part No. 65-2800 65-2802 65-2804 65-2806
Size 762.00 x 1219.20 x 31.75 mm 762.00 x 1524.00 x 31.75 mm 762.00 x 1828.80 x 31.75 mm 914.40 x 1828.80 x 31.75 mm
kg. 22.680 28.577 34.020 40.824
Table Top Fastening Kit • Fastening kit includes:
7
1 - 40-4295 - 40 Series slotted inside corner bracket 1 - 13-8316 - M8 x 16mm BHSCS 1 - 40-1986 - M8 Series drop-In T-nut 1 - 19-6042 - M8 bright zinc washer 1 - #14 x 1 1/4" Phillips pan head sheet metal screw
Part No. 65-2810
Description Table Top Fastening Kit
kg. .152
922 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
AkroBins® • 25 and 40 Series compatible
Accessories
Metric
• Bins hang from aluminum container hanger that mounts to T-slot (hardware included) • Polypropylene storage bins that hang or stack • Develop your own customized storage system • AkroBins are made in the USA • Choose from six sizes • Large label slot • In stock for immediate shipment • Available in red, blue or yellow (specify color when ordering)
Aluminum Container Hangers
7
Part No. 65-2230 65-2240 65-2250 65-2270 65-2271 65-2272 65-2264 65-2265
L 136.50 187.30 276.20 276.20 273.10 374.70
Outside Dimensions Inside Dimensions W H L W 104.80 76.20 120.70 87.30 104.80 76.20 171.50 87.30 139.70 127.00 260.40 111.10 279.40 127.00 260.40 254.00 209.60 177.80 254.00 166.70 209.60 177.80 355.60 166.70 160mm aluminum container hanger includes mounting hardware 320mm aluminum container hanger includes mounting hardware
Phone: 260-248-8030
•
Fax: 260-248-8029
•
H 71.40 71.40 120.70 120.70 171.50 171.50
www.8020.net
kg. — .054 .113 .286 .438 .524 .983 .095 .188
923
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Accessories
Cart Guard® • 25 and 40 Series compatible • 25.40mm x 25.40mm flexible PVC bumper protects your stuff • Stock colors available include black, red, blue and gray • Bolt-on mounting base allows Cart Guard to snap to your frame • Stock length 3657.60mm • Refer to page 1029 for cut-to-length services
7
Part No. 65-2854 65-2855 65-2856 65-2857 65-2858
Description Mounting Base Black Cover Gray Cover Red Cover Blue Cover
Bolt Kits 75-3411*
Series 25 and 40 Series
*NOTE: Mounting Base Part No. 65-2854 requires one (1) 75-3411 for every 102mm of Cart Guard.
924 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Cart Guard® Corners • Cap off your Cart Guard bumpers
Accessories
Metric
• Square end, round end, 90° corner options • Available in matching Cart Guard colors • Mounting hardware included
Color Black Gray Red Blue
Corner 65-2867 65-2868 65-2869 65-2870
Square 65-2863 65-2864 65-2865 65-2866
Round 65-2859 65-2860 65-2861 65-2862
Helpful Hints: If you are applying Cart Guard to an application, choose the profiles that will be connected to the Cart Guard. Use the information below to determine the lengths of your Cart Guard and Mounting Base according to the “Corners” you are using. If you are using the… 1. Square End Cart Guard Corner, you will need to:
7
• Order a piece of Cart Guard which is 6.35mm less than your covered length. • Order a piece of Mounting Base which is 6.35mm less than your profile length. 2. Round End Cart Guard Corner, you will need to: • Order a piece of Cart Guard which is 76.20mm less than your covered length. • Order a piece of Mounting Base which is 25.40mm less than your profile length. 3. 90 Degree Cart Guard Corner, you will need to: • Order a piece of Cart Guard which is 76.20mm less than your covered length. • Order a piece of Mounting Base which is the same length as the profile.
Step-by-Step Installation: ➊ Bolt Mounting Base to profile with recommended fasteners. ➋ Place “corners” on the ends with supplied flathead screws. ➌ Snap on Cart Guard.
Phone: 260-248-8030
•
Fax: 260-248-8029
•
www.8020.net
925
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Accessories
* See Compatibility Code information on page 833.
Tool Hangers • 25 and 40 Series compatible • Made of high-strength black nylon • Ideal for hanging air tools, cable reels, heavy door panels or transporting cables • Slides into 6mm and 8mm wide profile slots and moves easily in the T-slot • 68 kg. capacity
Part No. 25-2099 40-2100
Description Tool Hanger 25 Series Tool Hanger 40 Series
A 27.94 40.64
B 17.42 26.67
C 8.30 12.70
D 50.80 76.20
kg. .008 .025
Tool Hanger Nylon, Black
7
• Slides in the T-slot of 30 or 45 Series profiles • The snap hook mounts in the hanger hole • Great for hanging and positioning tools, reels and cables
Part No. 12016 12015
Description
A
B
C
Tool Hanger
26.00
60.00
10.50
D 15.00 19.00
E
F
kg.
4.20
8.00
.009
Compatibility Code* 8-30 10-45
926 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Spring Snap Hook • Easy to change tools/devices
Accessories
Metric
* See Compatibility Code information on page 833.
• Strong, 249.48 kg. breaking strength • Made of electro-galvanized mild steel • Shown with tool hanger, page 926
Part No. 65-2108
Description Spring Snap Hook
A 6.35
B 60.32
C 7.92
D 7.92
kg. .027
Gravity Roller Mounting Block Fiberglass-Reinforced Nylon, Black
• Roller pin snaps in/out • Reverses to fit slot 8/10 profiles • Use with gravity rollers on page 1134
7
Recommended Mounting Hardware: Part No. 75-3601 75-3482 Part No. 12167
Series 40 45 A 50.00
Qty 1 1
Description M6 x 14mm BHSCS & Drop-In T-nut M6 x 18mm BHSCS & Drop-In T-nut
B 7.20
C 6.50
Phone: 260-248-8030
D 7.00
•
E 10.00
F 18.00
G 12.00
H 8.00
Fax: 260-248-8029
kg. .008
•
Compatibility Code* 8-15, 8-40, 10-45
www.8020.net
927
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Accessories
Rubber Bumper • 25 or 40 Series compatible • Bolts to T-slot with included hardware • Made of styrene butadiene rubber • Can be used as door stops, shock mounts, vibration dampeners
Mounting Hardware (Included): Bumper Part No. Qty Hardware Description 25-2850 1 M6 x 16mm BHSCS & Economy T-Nut 40-2849 1 M8 x 20mm FBHSCS & Economy T-Nut Part No. 25-2850 40-2849
Description Styrene Butadiene Bumper
A 25.40 38.10
B 14.30 15.90
C 7.90 8.70
D 7.10 7.90
B 1.50 1.50
C 8.30 8.30
E 13.50 14.00
kg. .024 .040
Nylon T-Slot Nut
7
• 40 Series compatible • Light-duty fastening method for 40 Series accessories • Remains in place even in vertical applications • Tightening the #12 sheet metal screw expands the nut into the T-slot
Part No. 40-3348 40-3346
Description T-Slot Nuts w/screws T-Slot Nuts only
Quantity 12 per bag 50 per bag
A 14.40 14.40
kg. .140 bag .032 bag
928 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Plastic Document Holder • Snaps shut to hold documents securely
Accessories
Metric
• Holds paper, vinyl and fabric up to 1.0mm thick • Available in black PVC • Adhesive peel & stick strip backing • Adheres to most materials
Part No. 65-2851 65-2852
Standard Length 76.20 558.80
Description
A 20.60 20.60
Adhesive Mount Document Holder
B 7.20 7.20
C 8.70 8.70
D 4.40 4.40
kg. .008 .062
Label Holders
7
• Snaps into T-slot of 25, 30 and 40 Series profiles • Heavy-duty clear plastic with non-glare finish • Sold in packs of 25
Part No. 25-2843 25-2844 40-2845 40-2846
Description
Size - mm 25.4 x 76.2 25.4 x 152.4 50.8 x 101.6 50.8 x 152.4
T-Slot Label Holder
kg. .012 .024 .031 .046
Units
Compatibility Code
Per Pkg. of 25
6-10, 6-25 8-15, 8-30, 8-40
* See Compatibility Code information on page 833.
Phone: 260-248-8030
•
Fax: 260-248-8029
•
www.8020.net
929
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Accessories
Wiring Duct • 25 and 40 Series compatible • Strips interlock for end-to-end attachment • Available in gray • Interlocked length 500mm • Overlapping fingers mean no separate cover and no sharp edges
Part No. 65-2899
7
Description Wire Duct
kg. .024
Mounting Hardware (4) 75-3537 (4) 75-3539
Series 25 Series 40 Series
Wire Ties • Organizes tubing and wires • Compatible with all profile series • Sold in packages of 100 ties • High tensile strength • Color: black
Recommended Mounting Hardware (Mount to T-Slot): Part No. 3059 AND 3382
Part No. 2890 2891 2892 2893 2894 2895
Length 6.000 8.000 11.000 — — —
Qty 1 1
Description 18 Lb. UV Black Wire Ties 40 Lb. UV Black Wire Ties 50 Lb. UV Black Wire Ties .750 Mounting Pads 1.000 Mounting Pads 1/4 Inch Screw Mounting Pads
1
1
Description /4-20 x 3/8” BHSCS
/4-20 Economy T-Nut Quantity
100 Per Package
930 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Cable & Tube Clip, 1/4 Turn
Fiberglass Reinforced Nylon, Black • 15, 30, 40 and 45 Series compatible • Attach cable or tube without the need for cable ties • Can be opened and closed repeatedly • Twist 1/4 turn to lock in T-slot
Part No. 12321 12319 12320
A 2.00 4.50 5.80
B (Slot Tab) 8.00 8.00 10.00
C
D
E
F
20.00
40.00
32.60
16.00
kg. .009 .007 .009
Accessories
Metric
* See Compatibility Code information on page 833.
Compatibility Code* 8-30 8-15, 8-40 10-45
Cable & Tube Clip
Fiberglass Reinforced Nylon, Black • 15, 30, 40 and 45 Series compatible • Attach cable or tube without the need for cable ties • Can be opened and closed repeatedly
7
Recommended Mounting Hardware (Mount to Profile): Part No. 75-3560 75-3561 75-3563 Part No. A (Slot Tab) 12025 None 12026 8.00 12027 10.00
Series 15, 40 30 45
Qty 1 1 1
Description M4 x 12mm SHCS & Drop-In T-nut M4 x 12mm SHCS & Drop-In T-nut M4 x 12mm SHCS & Drop-In T-nut
B
C
D
E
F
G
H
kg.
20.00
40.00
32.60
16.00
1.60
4.50
8.00
.009
Phone: 260-248-8030
•
Fax: 260-248-8029
•
Compatibility Code* 8-15, 8-30, 8-40, 10-45 8-15, 8-30, 8-40 10-45
www.8020.net
931
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Accessories
Tube and Wire Clamps • 25 and 40 Series compatible • Attaches easily to T-slots • Organizes tubing and wires • Made from tough black polypropylene • Resists oils, chemicals and acids • Stackable design • High strength — low cost
7
Part No. Single Clamp 65-2500 65-2501 65-2502 65-2503 65-2504 65-2505 Double Clamp 65-2506 65-2507 65-2508 65-2509 65-2510 65-2511
Tube Size
A
B
C
D
E
F
G
H
J
K
L
kg.
3.10 6.30 9.50 12.70 19.00 25.40
22.20 22.20 27.00 34.00 42.00 42.00
— — — — — —
15.3 15.5 18.4 22.2 26.3 25.6
3.00 6.00 9.10 15.00 19.00 24.10
3.10 6.30 9.50 12.70 19.00 25.40
11.90 11.90 15.80 19.80 19.80 19.80
6.30 6.30 6.30 6.30 6.30 6.30
6.30 6.10 6.80 6.30 6.30 6.30
— — — — — —
10.30 10.30 15.00 24.60 30.10 30.10
6.80 6.70 8.50 11.90 15.70 16.40
.0020 .0020 .0040 .0070 .0100 .0090
3.10 6.30 9.50 12.70 19.00 25.40
— — — — — —
30.90 30.90 42.00 53.10 70.00 70.00
— — — — — —
3.00 6.00 9.10 15.00 19.00 24.10
3.10 6.30 9.50 12.70 19.00 25.40
11.90 11.90 15.80 19.80 19.80 19.80
6.30 6.30 6.30 6.30 6.30 6.30
6.30 6.10 6.80 6.30 6.30 6.30
15.20 15.20 20.30 26.60 34.50 34.90
10.30 10.30 15.00 22.60 30.10 30.10
6.50 6.50 8.70 11.50 15.90 15.90
.0020 .0030 .0050 .0110 .0160 .0120
Recommended Mounting Hardware* 65-2500 Part No. 65-2506 25 Series 75-3413 40 Series 75-3414
65-2501 65-2507 75-3415 75-3414
65-2502 65-2508 75-3414 75-3415
65-2503 65-2509 75-3416 75-3416
65-2504 65-2510 75-3417 75-3418
65-2505 65-2511 75-3417 75-3418
* Bolt kits are for unstacked tube clamps. All kits consist of M6 SHCS and economy T-nut.
932 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Cable Mount Block, 1/4 Turn
Fiberglass-Reinforced Nylon, Black • 10, 15, 25, 30, 40 and 45 Series compatible
Accessories
Metric
• See below for a selection of wire ties • Attach cable ties to block in two directions • Twist 1/4 turn to lock in T-slot
Part No.
12314 New! 12317
12316 12315
A
B
C
D
22.00
10.00
11.00
2.00
E 2.50 2.00 4.30 5.80
Slot Tab 6.80 8.00 8.00 10.00
kg. .0035 .0076 .0040 .0076
Compatibility Code* 6-10, 6-25 8-30 8-15, 8-40 10-45
7
* See Compatibility Code information on page 833.
Phone: 260-248-8030
•
Fax: 260-248-8029
•
www.8020.net
933
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Accessories
Pressure Manifold Plates • 25 and 40 Series compatible • Includes all mounting hardware and gaskets • Made of 6105-T5 clear anodized aluminum • Make your own custom manifolds; See pages 695-709 for Structural Shapes • Pressurize your machine frame • Compatible with most fluids and gases • 150 p.s.i. maximum pressure • See page 1029 for profile end tapping service and page 1040 fo drill thru
25 Series
25-2341
25-2439
25-2151
25-2451
25-2349
25-2152
25-2159
25-2154
7
40 Series
40-2340
40-2150
40-2450
40-2153
40-2441
40-2440
40-2350
40-2160
40-2155
934 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Pressure Manifold Plates continued
Accessories
Metric
• Plates are supplied with either o-rings bonded in place or gaskets shipped loose • O-ringed plates are mounted to the profile’s T-slotted side to completely seal a hole, or seal a hole where air is to be released • Gasketed plates are mounted to the profile’s end to completely seal the end, or seal the end where air is to be released • CR-20 is a cork and synthetic rubber material manufactured by Global Technology Systems Part No. 25 Series 25-2151 25-2159 25-2341 25-2349 25-2439 25-2451 40 Series 40-2150 40-2160 40-2340 40-2350 40-2440 40-2441 40-2450
Size 25 x 50 50 x 50 40 x 80 80 x 80 Part No. 25-2341 25-2439 25-2151 25-2451 25-2349 25-2159 40-2340 40-2450 40-2150 40-2441 40-2440 40-2350 40-2160
A
B
C
D
E
F
G
H
50.00 50.00 50.00 50.00 50.00 50.00
25.00 50.00 25.00 50.00 25.00 25.00
Drill thru and C-bore for M6 SHCS
25.00 25.00 25.00 25.00 25.00 25.00
12.50 12.50 12.50 12.50 12.50 12.50
12.00 12.00 12.00 12.00 12.00 12.00
1/4” NPT 3/8” NPT — — 1/8” NPT —
12.50 12.50 — — 12.50 —
80.00 80.00 80.00 80.00 80.00 80.00 80.00
40.00 80.00 40.00 80.00 40.00 40.00 40.00
Drill thru and C-bore for M8 SHCS
40.00 40.00 40.00 40.00 40.00 40.00 40.00
20.00 20.00 20.00 20.00 20.00 20.00 20.00
19.00 19.00 19.00 19.00 19.00 19.00 19.00
3/8” NPT 1/2” NPT — — 1/4” NPT 3/8” NPT —
20.00 20.00 — — 20.00 20.00 —
Gasket Part No. 25-2152 25-2154 40-2153 40-2155
Replacement Gaskets and O-Rings Material Finish CR-20 CR-20 CR-20 CR-20
Description Blank P. M. Plate Tapped P. M. Plate Tapped P. M. Plate Blank P. M. Plate Blank P. M. Plate Tapped P. M. Plate Blank P. M. Plate Blank P. M. Plate Tapped P. M. Plate Tapped P. M. Plate Tapped P. M. Plate Blank P. M. Plate Tapped P. M. Plate
Phone: 260-248-8030
Size in mm 25 x 50 25 x 50 25 x 50 25 x 50 50 x 50 50 x 50 40 x 80 40 x 80 40 x 80 40 x 80 40 x 80 80 x 80 80 x 80
•
O-Ring Part No. 25-2157 — 40-2156 —
NPT — 1/8” 1/4” — — 3/8” — — 3/8” 3/8” 1/4” — 1/2”
Fax: 260-248-8029
Material Finish Buna-N — Buna-N —
Mounting Location Profile End Profile Side Profile End Profile Side Profile End Profile End Profile End Profile Side Profile End Profile Side Profile Side Profile End Profile End
•
7
kg. .0410 .0360 .0340 .0410 .0790 .0730 .1710 .1830 . 1570 .1760 .1760 .3450 .3260
www.8020.net
935
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Accessories
Anodize Breaker Zinc-Plated Steel
• Penetrates anodizing to provide grounding continuity between 40 Series profiles • Twist breaker into the T-slot, tilt at 45° angle, then drive the M6 set screw into the seam of the mating profiles
Part No. 12328
A 8.00
B 10.00
C 13.40
D 3.20
E M6
kg. .0052
Compatibility Code* 8-15, 8-40
kg. .019
Compatibility Code* 8-15, 8-40
Grounding Terminal Zinc-Plated Steel/Brass
7
• For use in applications such as electronics assembly, where electrostatic charges must be avoided • Creates a conductive connection to T-slotted profiles
Part No. 12300
A 13.50
B 7.80
C 25.00
D 7.20
E M6
* See Compatibility Code information on page 833.
936 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Power Strips • Mounting clips and hardware are included
Accessories
Metric
• All units are UL and ULC recognized components except as noted • No machining necessary — mounting clips attach to T-slots
© 2009 The Wiremold Company All Rights Reserved
Part No. 2676 2670 2674 2675
Description 20” Long, 8 Outlet, Wiremold® Power Strip 13” Long, 4 Outlet, Wiremold® Power Strip 20” Long, 8 Outlet, Wiremold® Power Strip 20” Long, 8 Outlet, Wiremold® Power Strip
Power Requirements 15 amp 20 amp 20 amp 20 amp
Cord Length 6 ft. 6 ft. 6 ft. 15 ft.
Surge Protection No No Yes Yes
Spring Clip Mounting: 1) Pre-load the hardware onto the mounting clips. 2) Slide the mounting clips into the T-slot. 3) Place the mounting clips 1” (25mm) in from each end of the power strip and tighten the mounting clips into place. 4) Place power strip in one side of the mounting clips and snap into position.
7
Power Strip Plug Options
15 Amp Straight Blade Phone: 260-248-8030
•
20 Amp Straight Blade Fax: 260-248-8029
•
www.8020.net
937
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Accessories
T-Slot Velcro® Fastener • 40 Series compatible • Mounts lightweight panels and parts quickly and easily • The finned projection twists easily into the T-slot • Includes a self-adhesive mating pad
Part No. 40-3273
Color Black
kg. .0023
Push-In Fastener • Pushes into the center holes of 25 and 40 Series profiles • Ideal for fastening end caps or as a document holder
7
• Available in red, blue, black, yellow or gray (please specify color)
Part No. 25-3272 40-3274
Series 25 Series 40 Series
A 12.70 15.80
B 5.80 7.60
C 10.2 17.7
kg. .0002 .0009
938 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
