Transcript
DRIVING CARRIER ETHERNET ACCESS Data Sheet
Metrobility® R4000 Coarse Wave Division Multiplexing R4000 with OADM Modules
Product Highlights Expansion port supports up to 16 discrete wavelengths
R4000 with 8-Channel Multiplexer Module and 4-Channel Multiplexer Module
Passive "Drop and Pass" or "Drop and Add" capabilities Managed 45Mbps - 2.7Gbps optical links
T
he Metrobility® R4000 Coarse Wave
Passive CWDM
Division Multiplexing (CWDM) solution
The R4000 platform can support up to two (2)
from Telco Systems provides a cost-effective
modules, including 4-channel and 8-channel
“no new fiber upgrade” solution for adding
multiplexers, and OADM modules. Multiple
new services and customers to an existing fiber
modules may be linked through the expansion
infrastructure.
port to increase wavelength capacity to a total
Multiplexing and optical add/drop
of 16 on a single fiber pair. This modularity
capabilities
enables providers to add wavelengths as needed
Metrobility’s CWDM solutions allow users
in as few as four wavelengths at a time.
to increase the capacity of existing fiber by
An Optical Add/Drop Multiplexer module
utilizing widely spaced, separate wavelengths
provides the "drop and pass" or "drop and add"
- between 1350nm and 1610nm - within the
capabilities.
same fiber pair. These CWDM solutions can support up to 16 different channels utilizing
The R4000 requires no external power and may be installed in outdoor cabinets.
a combination of 8-channel and 4-channel multiplexers. An expansion port on the 4-
Active CWDM
channel multiplexer allows additional unique
Metrobility line cards which support the ITU
wavelengths to be combined on a single fiber
CWDM wavelength grid provide a copper
pair by “chaining” multiplexers prior to the final
conversion to connect directly to a switch at the
network connection.
provider's edge and the subscribers network.
Optical Add/Drop multiplexers (OADM) provide the ability to “drop and add” or “drop
These cards require a Metrobility platform (R5000, R1000, R200 or R400).
and pass” one or more of the wavelengths from the fiber locally. "Drop and pass" extracts the
Management
assigned wavelengths and relays the remaining
Each active connection can be managed at
channels to the next destination creating a
through the Metrobility management card
point-to-point optical link from the subscriber
and NetBeacon® ESP Element Management
site to the central locations. "Drop and add"
softwaren
inserts a wavelength onto the link to create a point-to-point link from one site to another.
Supports ITU G.694.2 CWDM wavelength grid with a spacing of 20nm Passive modules require no power NEBS certified
Point-to-Point Network Supporting 16Gbps over Singlemode Fiber Site B
Site A 1 Gig Uplinks
1 Gig Uplinks
Switch
The Metrobility® CWDM solutions by Telco Systems allow users to increase the capacity of existing fiber by utilizing widely spaced, separate wavelengths
R5000
– between 1310nm and 1610nm – within the same
R4000
fiber pair. Up to 16 different channels can be combined on a single fiber pair.
Up to 16 Gig over pair of singlemode fiber
Key Applications
Ordering Information R4000 CWDM Options Part Number R4000-02* RM-1000 4000-CA
Description
19", 1U Rack Mount Platform for CWDM multiplexer and OADM modules Extension for 23" rack Fiber Cable kit - (4) SM LC to SC (1m) Multipler Modules (SC connectors) R416-B4* 8-Channel CWDM mux/de-mux module Multipler Modules (SC connectors with expansion port) R416-A4-A* 4-Channel CWDM mux/de-mux module R416-A4-B* 4-Channel CWDM mux/de-mux module R416-A4-C* 4-Channel CWDM mux/de-mux module R416-A4-D* 4-Channel CWDM mux/de-mux module Multipler Modules (SC connectors with expansion port and extended temperature range) R416-A4-AE* 4-Channel CWDM mux/de-mux module R416-A4-BE* 4-Channel CWDM mux/de-mux module
Single Channel OADM Modules R426-D4-xx* R436-J4-xx*
1310nm to 1610nm drop and pass modules 1310nm to 1610nm drop and add modules Single Channel OADM Modules (SC connectors with extended temperature range) R426-D4-xxE* 1470nm to 1610nm drop and pass modules R426-J4-xxE* 1470nm to 1610nm drop and add modules
Advanced diagnostics:
• Optical Power Measurement • Remote Loopback • Quality of Line • Quality of Equipment • Link Loss Return • Link Loss Carry Forward • Far End Fault
Extended temperature modules for outdoor installations
Features and Benefits Drop and Add Drop and Pass Line Protections and Restoration (LPR) Ring Configuration
Metrobility Active Electrical-to-Optical Options Platform
Management capabilities when configured with a managed platform
R5000-17HS* R1000-xx or -xxx R400-2HS-1A R200-xx
17-slot platform with two bays for optional AC/DC power supplies 2-slot platform with one or two AC or DC power supplies (one slot for R502-M management card) 2-slot platform with single external AC power supply (one slot for R502-M management card) 1-slot platform with single internal AC or DC power supplies
R821-1S R821-11 R851-1S R851-SS R231-47 to -61*** R153-1S R153-SS R752-11 R752-1S R752-SS RA21-47 to -61
10/100BASE-T RJ-45 to 100BASE-X LC SFP (requires 1 pluggable optic**) 10/100BASE-T RJ-45 to 10/100BASE-T RJ-45 10/100/1000TX to 10/100BASE-X LC SFP (requires 1 pluggable optic**) 1000BASE-X LC SFP to 1000BASE-X LC SFP (requires 2 pluggable optics**) 100M TX RJ-45 to 100M FX 1000BASE-T RJ-45 to 1000BASE-X LC SFP (requires 1 pluggable optic**) 1000BASE-X LC SFP to 1000BASE-X LC SFP (requires 2 pluggable optics**) 1000Base-T to Dual 1000BASE-T (requires 1 pluggable optic**) 1000Base-T to Dual 1000BASE-X (requires 2 pluggable optics**) 1000Base-X to Dual 1000BASE-X (requires 3 pluggable optics**) Standalone unit with CWDM wavelength-specific fixed optics (1470nm to 1610nm)
NBESP-99 NBESP-249 NBESP-UNLIMITED R502-M*
Management Software for Windows XP Professional and NetBeacon ESP software license for 99, 249, or unlimited network elements
CWDM Managed Line Card Options
NetBeacon ESP Element Management System
Management Card - one DB-15 and two RJ-45 connectors (requires one slot in platform)
Specifications Spec SubHeader
Environmental Operating Temperature Operating Humidity Storage Temperature
0°C to 50°C 5% - 95% -30°C to 70°C
Environmental (Extended Temperature) Operating Temperature -40°C to 80°C Regulatory Compliance ITU G.694.2; NEBS Safety and EMC FCC, UL, CE, C-UL Physical Specification Dimensions Weight
1.7”H x 17.0”W x 10.0”L 4.4cmH x 43.2cmW x 25.4cmL 2.85lb / 1.29kg
*NEBS certified **see R4000 user manual for list of recommended CWDM pluggable optics ***U.S. Patent No. 6,741,566 B1
U . S . n E U R O P E n A PA C Int'l Headquarters Te l : + 9 7 2 - 9 - 8 6 6 - 2 5 2 5 Fax:+972-9-866-2500
[email protected] h t t p : / / w w w. t e l c o . c o m
US Headquarters Te l : + 1 - 8 0 0 - 2 2 1 - 2 8 4 9 Fax:+1-781-551-0538
[email protected] h t t p : / / w w w. t e l c o . c o m
Germany Tel: +49-241-4635490 Fax: +49-241-4635491 i n f o @ b a t m . d e h t t p : / / w w w. t e l c o . c o m
France Tel: +33 (0) 1 -56 7-1 2-7 73 Fax: +33 (0) 1- 43 7-7 1-7 80
[email protected] h t t p : / / w w w. b a t m . f r
www.telco.com Asia Pacific Te l : + 6 5 - 6 7 2 5 - 9 9 0 1 Fax:+65-6725-9889
[email protected] h t t p : / / w w w. t e l c o . c o m
Japan Te l : + 8 1 ( 3 ) 5 2 11 - 1 7 0 5 Fax:+81(3)5510-9131
[email protected] h t t p : / / w w w. t e l c o . c o m
©2007 Telco Systems a BATM Company. All rights reserved. All trademarks are property of their respective owners. Specifications are subject to change without notice. PN:R4000 3/08
