Transcript
SERVICE MANUAL
MEX-BT5100 US Model Canadian Model AEP Model UK Model E Model
Ver. 1.0 2007.10
US and foreign patents licensed from Dolby Laboratories Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. BBE MP (Minimized Polynomial Non-Linear Saturation) Process improves digitally compressed sound, such as MP3, by restoring and enhancing the harmonics lost through compression. BBE MP works by re-generating harmonics from the source material, effectively recovering warmth, details and nuance.
Model Name Using Similar Mechanism
MEX-BT5000
CD Mechanism Type
MG-611WA-186//Q
Optical Pick-up Name
KSS1000E
R
The “SAT Radio Ready” logo indicates that this product will control a satellite radio tuner module (sold separately). Please see your nearest authorized Sony dealer for details on the satellite radio tuner module. “SAT Radio,” “SAT Radio Ready,” the SAT Radio and SAT Radio Ready logos and all related marks are trademarks of Sirius Satellite Radio Inc. and XM Satellite Radio Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. SonicStage and its logo are trademarks of Sony Corporation. “ATRAC” and its logo are trademarks of Sony Corporation.
Microsoft, Windows Media, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
SPECIFICATIONS AUDIO POWER SPECIFICATIONS (US, Canadian only) POWER OUTPUT AND TOTAL HARMONIC DISTORTION 23.2 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 5% total harmonic distortion. CEA2006 Standard Power Output: 17 Watts RMS × 4 at 4 Ohms < 1% THD+N SN Ratio: 82 dBA (reference: 1 Watt into 4 Ohms)
The HD Radio Ready logo is a registered trademark of iBiquity.
Tuner section (US, Canadian) FM Tuning range: 87.5 – 107.9 MHz Antenna terminal: External antenna connector Intermediate frequency: 10.7 MHz/450 kHz Usable sensitivity: 9 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono) Harmonic distortion at 1 kHz: 0.5 % (stereo), 0.3 % (mono) Separation: 35 dB at 1 kHz Frequency response: 30 – 15,000 Hz
HD RadioTM is a trademark of iBiquity Digital Corp.
Tuning range: 530 – 1,710 kHz Antenna terminal: External antenna connector Intermediate frequency: 10.7 MHz/450 kHz Sensitivity: 30 μV
FM Tuning range: 87.5 – 108 MHz Aerial terminal: External aerial connector Intermediate frequency: 10.7 MHz/450 kHz
9-887-836-01
Sony Corporation
2007J05-1 © 2007.10
eVehicle Division Published by Sony Techno Create Corporation
Tuning range: MW: 531 – 1,602 kHz LW: 153 – 279 kHz Aerial terminal: External aerial connector Intermediate frequency: 10.7 MHz/450 kHz Sensitivity: MW: 30 μV, LW: 40 μV
FM
Signal-to-noise ratio: 120 dB Frequency response: 10 – 20,000 Hz Wow and flutter: Below measurable limit
Tuner section (AEP, UK)
MW/LW
Tuner section (E)
CD Player section
AM The “HD Radio Ready” logo indicates that this product will control a Sony HD RadioTM tuner (sold separately). For HD RadioTM tuner operation, please refer to the HD RadioTM tuner Operating Instructions.
Usable sensitivity: 9 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono) Harmonic distortion at 1 kHz: 0.5 % (stereo), 0.3 % (mono) Separation: 35 dB at 1 kHz Frequency response: 30 – 15,000 Hz
Tuning range: 87.5 – 108.0 MHz (at 50 kHz step) 87.5 – 107.9 MHz (at 200 kHz step) FM tuning interval: 50 kHz/200 kHz switchable Aerial terminal: External aerial connector Intermediate frequency: 10.7 MHz/450 kHz Usable sensitivity: 9 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono) Harmonic distortion at 1 kHz: 0.5 % (stereo), 0.3 % (mono) Separation: 35 dB at 1 kHz Frequency response: 30 – 15,000 Hz
AM Tuning range: 531 – 1,602 kHz (at 9 kHz step) 530 – 1,710 kHz (at 10 kHz step) AM tuning interval: 9 kHz/10 kHz switchable Aerial terminal: External aerial connector Intermediate frequency: 10.7 MHz/450 kHz Sensitivity: 30 μV
– Continued on next page –
Bluetooth™ AUDIO SYSTEM
MEX-BT5100
Wireless Communication Communication System: Bluetooth Standard version 2.0 Output: Bluetooth Standard Power Class 2 (Max. +4 dBm) Maximum communication range: Line of sight approx. 10 m (32.8 ft)*1 Frequency band: 2.4 GHz band (2.4000 – 2.4835 GHz) Modulation method: FHSS Compatible Bluetooth Profiles*2: A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) HFP (Handsfree Profile) OPP (Object Push Profile) *1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna's perfomance, operating system, software application, etc. *2 Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices.
Power amplifier section Outputs: Speaker outputs (sure seal connectors) Speaker impedance: 4 – 8 ohms Maximum power output: 52 W × 4 (at 4 ohms)
General Outputs: Audio outputs terminal (front/rear) Subwoofer output terminal (mono) Power antenna relay control terminal Power amplifier control terminal Inputs: Telephone ATT control terminal Illumination control terminal BUS control input terminal BUS audio input/AUX IN terminal Remote controller input terminal Antenna input terminal Tone controls: Low: ±10 dB at 60 Hz or 100 Hz (XPLOD) Mid: ±10 dB at 500 Hz or 1 kHz (XPLOD) High: ±10 dB at 10 kHz or 12.5 kHz (XPLOD) Power requirements: 12 V DC car battery (negative ground) Dimensions: Approx. 178 × 50 × 183 mm (7 1/8 × 2 × 7 1/4 in) (w/h/d) Mounting dimensions: Approx. 182 × 53 × 162 mm (7 1/4 × 2 1/8 × 6 1/2 in) (w/h/d) Mass: Approx. 1.2 kg (2 lb 11 oz) Supplied accessories: Card remote commander: RM-X301 (US, Canadian) Card remote commander: RM-X302 (AEP, UK) Card remote commander: RM-X303 (E) Parts for installation and connections (1 set)
• AEP, UK, E model
Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information.
MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Note This unit cannot be connected to a digital preamplifier or an equalizer which is Sony BUS system compatible. Design and specifications are subject to change without notice.
This label is located on the bottom of the chassis.
CAUTION – CLASS 1M INVISIBLE LASER RADIATION WHEN OPEN. DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. SAFETY-RELATED COMPONET WARNING!
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Notes on chip component replacement • Never reuse a disconnected chip component. • Notice that the minus side of a tantalum capacitor may be damaged by heat. Flexible Circuit Board Repairing • Keep the temperature of soldering iron around 270 °C during repairing. • Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). • Be careful not to apply force on the conductor when soldering or unsoldering.
2
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
MEX-BT5100
TABLE OF CONTENTS
1.
SERVICING NOTES .............................................
4
2.
GENERAL ..................................................................
6
3.
DISASSEMBLY
3-1. 3-2. 3-3. 3-4. 3-5. 3-6. 3-7. 3-8. 3-9. 3-10. 3-11. 3-12. 3-13. 3-14.
Disassembly Flow .......................................................... Front Back Panel Assy ................................................... KEY Board...................................................................... Sub Panel Assy ............................................................... CD Mechanism Block (MG-611WA-186//Q) ................ MAIN Board .................................................................. ANTENNA Board, IT Board .......................................... Chassis (T) SUB Assy .................................................... Roller Arm Assy.............................................................. Chassis (OP) Assy ........................................................... Optical Pick-up (KSS1000E) .......................................... SL Motor Assy (Sled) (M902) ........................................ LE Motor Assy (B) (Loading) (M903) ........................... SERVO Board .................................................................
4.
TEST MODE ............................................................ 20
5.
DIAGRAMS
5-1. 5-2. 5-3. 5-4. 5-5. 5-6. 5-7. 5-8. 5-9. 5-10. 5-11. 5-12. 5-13. 5-14. 5-15.
5-17. 5-18. 5-19. 5-20. 5-21.
Block Diagram - CD SERVO Section - .......................... Block Diagram - BLUETOOTH Section - ..................... Block Diagram - AUDIO Section -................................. Block Diagram - DISPLAY/MAIN Section - ................. Block Diagram - POWER SUPPLY Section - ................ Printed Wiring Boards - SERVO Section - ..................... Schematic Diagram - SERVO Section (1/2) -................. Schematic Diagram - SERVO Section (2/2) -................. Schematic Diagram - BLUETOOTH Section (1/2) - ..... Schematic Diagram - BLUETOOTH Section (2/2) - ..... Printed Wiring Boards - BLUETOOTH Section - .......... Schematic Diagram - MAIN Board (1/3) - ..................... Schematic Diagram - MAIN Board (2/3) - ..................... Schematic Diagram - MAIN Board (3/3) - ..................... Printed Wiring Board - MAIN Board (Component Side) - ................................ Printed Wiring Board - MAIN Board (Conductor Side) - .................................. Printed Wiring Board - SUB Board - .............................. Schematic Diagram - SUB Board -................................. Schematic Diagram - KEY Board (1/2) -........................ Schematic Diagram - KEY Board (2/2) -........................ Printed Wiring Board - KEY Board -..............................
6.
EXPLODED VIEWS
5-16.
6-1. Overall Section .............................................................. 6-2. Front Panel Section ........................................................ 6-3. CD Mechanism Deck Section-1 (MG-611WA-186//Q) ..................................................... 6-4. CD Mechanism Deck Section-2 (MG-611WA-186//Q) ..................................................... 6-5. CD Mechanism Deck Section-3 (MG-611WA-186//Q) ..................................................... 6-6. CD Mechanism Deck Section-4 (MG-611WA-186//Q) .....................................................
7.
13 13 14 14 15 15 16 16 17 17 18 18 19 19
21 22 23 24 25 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
61 62 63 64 65 66
ELECTRICAL PARTS LIST .............................. 67
3
MEX-BT5100 SECTION 1 SERVICING NOTES NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. NOTES ON LASER DIODE EMISSION CHECK Never look into the laser diode emission from right above when checking it for adjustment. It is feared that you will lose your sight. If the optical pick-up block is defective, please replace the whole optical pick-up block. Never turn the semi-fixed resistor located at the side of optical pick-up block. optical pick-up
UNLEADED SOLDER Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size) : LEAD FREE MARK Unleaded solder has the following characteristics. • Unleaded solder melts at a temperature about 40 °C higher than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350 °C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! • Strong viscosity Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. • Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. NOTE THE IC500 AND IC510 ON THE IT BOARD REPLACING When IC500 and IC510 on the IT board are damaged, exchange the new IT board for the IT board which IC damaged.
semi-fixed resistor
EXTENSION CABLE AND SERVICE POSITION When repairing or servicing this set, connect the jig (extension cable) as shown below. • Connect the MAIN board (CNP501) and the SERVO board (CN2) with the extension cable (Part No. J-2502-076-1). MAIN board (CNP501)
4
extension cable (Part No. J-2502-076-1)
SERVO board (CN2)
MEX-BT5100
FACTORY SHIPMENT MODE Even if the set is reset, bluetooth system menu setting, connected registration equipment, and telephone book function, etc. recorded in the flash memory are not initialized. It is necessary to execute factory shipment mode to initialize them. Procedure: 1. Turn off the setting of the bluetooth signal, and power supply is turned off. 2. Press the [4] t [5] t [1] ([1] is pressed for two seconds) button of the set sequentially, and enter the test mode. 3. Press the [1] button for two seconds of the set, and the DIAG information is initialized. 4. Press the [6] button for two seconds of the set, and the bluetooth setting item preserved in NOR FLASH is initialized. 5. Press the [OFF] button of the set, and the test mode is made clear. At this time, the memory of the tuner is initialized. 6. The power supply code is removed and the power supply is turned off, and the power supply will be turned on again in one minute. At this time, the tuner preset, and EQ3 setting value, etc. are initialized. RELEASING THE DISC SLOT LOCK The disc slot lock function for the antitheft of an demonstration disc in the store is equipped. Releasing Procedure : 1. Power supply is turned off. 2. Enter the Jog daial to the left, and enter the Jog daial to the right, and press the [1] t [2] ([2] is pressed for two seconds) button of the set sequentially, and disc slot is unlocked.
REPLACING THE LITHIUM BATTERY OF THE CARD REMOTE COMMANDER Under normal conditions, the battery will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.) When the battery becomes weak, the range of the card remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion. + side up
D Notes on the lithium battery • Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. • Wipe the battery with a dry cloth to assure a good contact. • Be sure to observe the correct polarity when installing the battery. • Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.
WARNING
Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire.
SECURITY To lock the personal information in the following menus by setting a 4-digit password. “Dialed Calls,” “Received Calls,” “Phonebook,” “Preset Dial,” “Receive PB” If you set the security, “Security Locked” appears when the above menus are operated. To unlock the security, select “Unlock” and input the password number. TEST DISCS Use following TEST DISC whan this set confirms the operation and checks it. 3-702-101-01 4-225-203-01 J-2502-063-1
YEDS-18 (for CD) PATD-012 (for CD) TCD-R082LMT (for CD-R)
5
MEX-BT5100 SECTION 2 GENERAL
This section is extracted from instruction manual.
(US, Canadian) Location of controls and basic operations Audio function
Card remote commander RM-X301
Main unit
RH RI RB
RL RM X XB
MEX-BT5100
RK
RB
Front panel removed
XT RT
RE RG
The following buttons on the card remote commander have also different buttons/functions from the unit. RH ENTER button To apply a setting. RI LIST/CAT*2 button To list up. RK Number buttons Buttons 1 to 6 share the same functions as the number buttons on the unit. RL . (+)/N (–) buttons The same as pushing the joystick up/down. RM ()/ ( ) buttons The same as pushing the joystick left/right. X SOUND button To select sound items. XB ATT (attenuate) button To attenuate the sound. To cancel, press again. XT VOL (volume) +/– buttons To adjust volume.
RESET
Radio: Push up/down to: – Receive stored station. Push left/right to: – Tune in stations automatically (push). – Find a station manually (push and hold). Press to: – Display the list. – Display the category list*2.
Refer to the pages listed for details. The corresponding buttons on the card remote commander control the same functions as those on the unit. " SOURCE button To power on; change the source (Radio/CD/ MD*1/Bluetooth AUDIO/AUX/SAT*2). # Joystick/LIST button Rotate to: Adjust the volume. Push up/down/left/right to: Select a menu item. Press to: Apply a setting. CD/MD*1: Push up/down to*3: – Skip groups*4/albums*5 (push). – Skip groups*4/albums*5 continuously (push and hold). Push left/right to: – Skip tracks (push). – Skip tracks continuously (push, then push again within about 2 seconds and hold). – Reverse/fast-forward a track (push and hold).
$ MODE button To select the radio band (FM/AM)/select the SAT tuner band (mode)*2/select the unit*6. % MENU button To enter menu. & Display window ' OPEN button ( OFF button To power off; stop the source. ) Receptor for the card remote commander
Bluetooth function
RT
RH RI
MEX-BT5100
RE RK
Front panel removed
RG
RB
RL
RESET
Refer to the pages listed for details. The corresponding buttons on the card remote commander control the same functions as those on the unit. " SOURCE button To power on; change the source (Radio/CD/ MD*1/Bluetooth AUDIO/AUX/SAT*2). # Joystick Rotate to: Adjust the volume. Push up/down/left/right to: Select a menu item. Press to: Apply a setting. Bluetooth audio device*3: Push left/right to: – Skip tracks (push). – Reverse/fast-forward a track (push and hold). $ Bluetooth button To access the Bluetooth functions; receive a call.
6
The following buttons on the card remote commander have also different buttons/functions from the unit.
% MENU button To enter menu; receive a call.
RT ENTER button To apply a setting.
& Display window
RE Number buttons To input numbers (phone number, passcode, etc.). Buttons 1 to 6 share the same functions as the number buttons on the unit.
' OFF button To power off; stop the source; end or reject a call. ( CALL button To access the telephone functions; receive a call. ) Receptor for the card remote commander * Number buttons To call stored dials. Bluetooth audio device*3: : PAUSE To pause playback. + Bluetooth indicator Lights up when the Bluetooth signal is input/ output. Goes off when the Bluetooth signal is off. , Microphone
Tip For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander” .
/ ;(eject) button To eject the disc.
Note If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless 4063$& on the unit is pressed, or a disc is inserted to activate the unit first.
. RESET button
Card remote commander RM-X301
Main unit
* SCRL (scroll) button To scroll the display item. + Number buttons CD/MD*1: : REP : SHUF : BBE MP*7 To activate the BBE MP function, set “BBE MP on.” To cancel, set “BBE MP off.” : PAUSE*7 To pause playback. To cancel, press again. Radio: To receive stored stations (press); store stations (press and hold). , DSPL (display) button To change display items. - Disc slot To insert the disc.
*1 When an MD changer is connected. *2 When the SAT tuner is connected. *3 If the changer is connected, the operation is different. *4 When an ATRAC CD is played. *5 When an MP3/WMA is played. *6 When a CD/MD changer is connected. *7 When playing back on this unit.
RG
button
RH . (+)/N (–) buttons The same as pushing the joystick up/down. RI ()/ ( ) buttons The same as pushing the joystick left/right. RK VOL (volume) +/– buttons To adjust volume. RL
button
*1 When an MD changer is connected. *2 When the SAT tuner is connected. *3 When a Bluetooth audio device (supports AVRCP of Bluetooth technology) is connected. Depending on the device, certain operations may not be available.
Note If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless 4063$& on the unit is pressed, or a disc is inserted to activate the unit first. Tip For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander” .
MEX-BT5100
(AEP, UK) Location of controls and basic operations Audio function
Card remote commander RM-X302
Main unit
RH RI RB
RL RM X XB XT
MEX-BT5100
RB
RK
Front panel removed
XE RT
RE RG
The following buttons on the card remote commander have also different buttons/functions from the unit. RH ENTER button To apply a setting. RI LIST button To list up. RK Number buttons Buttons 1 to 6 share the same functions as the number buttons on the unit. RL . (+)/N (–) buttons The same as pushing the joystick up/down. RM ()/ ( ) buttons The same as pushing the joystick left/right. X SCRL (scroll) button To scroll display item. XB SOUND button To select sound items. XT ATT (attenuate) button To attenuate the sound. To cancel, press again. XE VOL (volume) +/– buttons To adjust volume.
RESET
Refer to the pages listed for details. The corresponding buttons on the card remote commander control the same functions as those on the unit. " SOURCE button To power on; change the source (Radio/CD/ MD*1/Bluetooth AUDIO/AUX). # Joystick/LIST button Rotate to: Adjust the volume. Push up/down/left/right to: Select a menu item. Press to: Apply a setting. CD/MD*1: Push up/down to*2: – Skip groups*3/albums*4 (push). – Skip groups*3/albums*4 continuously (push and hold). Push left/right to: – Skip tracks (push). – Skip tracks continuously (push, then push again within about 2 seconds and hold). – Reverse/fast-forward a track (push and hold).
Radio: Push up/down to: – Receive stored station. Push left/right to: – Tune in stations automatically (push). – Find a station manually (push and hold). Press to: – Display the list. $ MODE button To select the radio band (FM/MW/LW)/ select the unit*5. % MENU button To enter menu. & Display window ' OPEN button ( OFF button To power off; stop the source. ) Receptor for the card remote commander
* AF (Alternative Frequencies)/TA (Traffic Announcement) button To set AF and TA in RDS. + Number buttons CD/MD*1: : REP : SHUF : BBE MP*6 To activate the BBE MP function, set “BBE MP on.” To cancel, set “BBE MP off.” : PAUSE*6 To pause playback. To cancel, press again. Radio: To receive stored stations (press); store stations (press and hold). , DSPL (display)/PTY (Programme Type) button To change display items; select PTY in RDS. - Disc slot To insert the disc.
Card remote commander RM-X302
Tip For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander”.
/ ;(eject) button To eject the disc.
Main unit
Note If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless 4063$& on the unit is pressed, or a disc is inserted to activate the unit first.
. RESET button
Bluetooth function
*1 When an MD changer is connected. *2 If the changer is connected, the operation is different. *3 When an ATRAC CD is played. *4 When an MP3/WMA is played. *5 When a CD/MD changer is connected. *6 When playing back on this unit.
RT
RH RI
Note If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless 4063$& on the unit is pressed, or a disc is inserted to activate the unit first. Tip For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander”.
MEX-BT5100
RE RK
Front panel removed
RG
RB
RL
RESET
Refer to the pages listed for details. The corresponding buttons on the card remote commander control the same functions as those on the unit. " SOURCE button To power on; change the source (Radio/CD/ MD*1/Bluetooth AUDIO/AUX). # Joystick Rotate to: Adjust the volume. Push up/down/left/right to: Select a menu item. Press to: Apply a setting. Bluetooth audio device*2: Push left/right to: – Skip tracks (push). – Reverse/fast-forward a track (push and hold). $ Bluetooth button To access the Bluetooth functions; receive a call.
The following buttons on the card remote commander have also different buttons/functions from the unit.
% MENU button To enter menu; receive a call.
RT ENTER button To apply a setting.
& Display window
RE Number buttons To input numbers (phone number, passcode, etc.). Buttons 1 to 6 share the same functions as the number buttons on the unit.
' OFF button To power off; stop the source; end or reject a call. ( CALL button To access the telephone functions; receive a call. ) Receptor for the card remote commander * Number buttons To call stored dials. Bluetooth audio device*2: : PAUSE To pause playback. + Bluetooth indicator Lights up when the Bluetooth signal is input/ output. Goes off when the Bluetooth signal is off. , Microphone
RG
button
RH . (+)/N (–) buttons The same as pushing the joystick up/down. RI ()/ ( ) buttons The same as pushing the joystick left/right. RK VOL (volume) +/– buttons To adjust volume. RL
button
*1 When an MD changer is connected. *2 When a Bluetooth audio device (supports AVRCP of Bluetooth technology) is connected. Depending on the device, certain operations may not be available.
7
MEX-BT5100
(E) Location of controls and basic operations Audio function
Card remote commander RM-X303
Main unit
RI RK RT
RM X XB XT
MEX-BT5100
RB
RT
RL
Front panel removed
XE RE
RG RH
The following buttons on the card remote commander have also different buttons/functions from the unit. RI ENTER button To apply a setting. RK LIST button To list up. RL Number buttons Buttons 1 to 6 share the same functions as the number buttons on the unit. RM . (+)/N (–) buttons The same as pushing the joystick up/down. X ()/ ( ) buttons The same as pushing the joystick left/right. XB SOUND button To select sound items. XT ATT (attenuate) button To attenuate the sound. To cancel, press again. XE VOL (volume) +/– buttons To adjust volume.
RESET
Refer to the pages listed for details. The corresponding buttons on the card remote commander control the same functions as those on the unit.
Radio: Push up/down to: – Receive stored station. Push left/right to: – Tune in stations automatically (push). – Find a station manually (push and hold). Press to: – Display the list.
" SOURCE button To power on; change the source (Radio/CD/ MD*1/Bluetooth AUDIO/AUX). # Joystick/LIST button Rotate to: Adjust the volume. Push up/down/left/right to: Select a menu item. Press to: Apply a setting. CD/MD*1: Push up/down to*2: – Skip groups*3/albums*4 (push). – Skip groups*3/albums*4 continuously (push and hold). Push left/right to: – Skip tracks (push). – Skip tracks continuously (push, then push again within about 2 seconds and hold). – Reverse/fast-forward a track (push and hold).
$ MODE button To select the radio band (FM/AM)/select the unit*5. % MENU button To enter menu. & Display window ' OPEN button ( OFF button To power off; stop the source. ) Receptor for the card remote commander * SCRL (scroll) button To scroll display item.
Bluetooth function
RT
RH RI
MEX-BT5100
Front panel removed
RE RK
RB
RG RL
RESET
Refer to the pages listed for details. The corresponding buttons on the card remote commander control the same functions as those on the unit. " SOURCE button To power on; change the source (Radio/CD/ MD*1/Bluetooth AUDIO/AUX). # Joystick Rotate to: Adjust the volume. Push up/down/left/right to: Select a menu item. Press to: Apply a setting. Bluetooth audio device*2: Push left/right to: – Skip tracks (push). – Reverse/fast-forward a track (push and hold). $ Bluetooth button To access the Bluetooth functions; receive a call.
8
% MENU button To enter menu; receive a call. & Display window ' OFF button To power off; stop the source; end or reject a call. ( CALL button To access the telephone functions; receive a call. ) Receptor for the card remote commander * Number buttons To call stored dials. Bluetooth audio device*2: : PAUSE To pause playback. + Bluetooth indicator Lights up when the Bluetooth signal is input/ output. Goes off when the Bluetooth signal is off. , Microphone
Tip For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander”.
0 ;(eject) button To eject the disc.
Note If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless 4063$& on the unit is pressed, or a disc is inserted to activate the unit first.
/ RESET button
Card remote commander RM-X303
Main unit
+ Frequency select switch (located on the bottom of the unit) See “Frequency select switch” in the supplied installation/connections manual. , Number buttons CD/MD*1: : REP : SHUF : BBE MP*6 To activate the BBE MP function, set “BBE MP on.” To cancel, set “BBE MP off.” : PAUSE*6 To pause playback. To cancel, press again. Radio: To receive stored stations (press); store stations (press and hold). - DSPL (display) button To change display items. . Disc slot To insert the disc.
*1 When an MD changer is connected. *2 If the changer is connected, the operation is different. *3 When an ATRAC CD is played. *4 When an MP3/WMA is played. *5 When a CD/MD changer is connected. *6 When playing back on this unit.
The following buttons on the card remote commander have also different buttons/functions from the unit. RT ENTER button To apply a setting. RE Number buttons To input numbers (phone number, passcode, etc.). Buttons 1 to 6 share the same functions as the number buttons on the unit. RG
button
RH . (+)/N (–) buttons The same as pushing the joystick up/down. RI ()/ ( ) buttons The same as pushing the joystick left/right. RK VOL (volume) +/– buttons To adjust volume. RL
button
*1 When an MD changer is connected. *2 When a Bluetooth audio device (supports AVRCP of Bluetooth technology) is connected. Depending on the device, certain operations may not be available.
Note If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless 4063$& on the unit is pressed, or a disc is inserted to activate the unit first. Tip For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander”.
MEX-BT5100
(US, Canadian, E) Cautions
ɠ To AMP REMOTE IN of an optional power amplifier
Be sure to install this unit in the dashboard of the car as the rear side of the unit becomes hot during use.
ɡ To the interface cable of a car telephone ɢ To a car’s illumination signal
This connection is only for amplifiers. Connecting any other system may damage the unit.
A
• This unit is designed for negative ground 12 V DC operation only. • Do not get the leads under a screw, or caught in moving parts (e.g. seat railing). • Before making connections, turn the car ignition off to avoid short circuits. • Connect the yellow and red power input leads only after all other leads have been connected. • Run all ground leads to a common ground point. • Be sure to insulate any loose unconnected leads with electrical tape for safety. • Do not cover the ventilation slots or heat sinks of the unit. • The use of optical instruments with this product will increase eye hazard.
AUDIO OUT FRONT
SUB OUT (MONO)
AUDIO OUT REAR
Notes on the power supply lead (yellow) • When connecting this unit in combination with other stereo components, the connected car circuit’s rating must be higher than the sum of each component’s fuse. • When no car circuits are rated high enough, connect the unit directly to the battery.
B
Notes (ǵ-A) • Be sure to connect the ground lead before connecting the amplifier. • The alarm will only sound if the built-in amplifier is used. Tip (ǵ-B- ) For connecting two or more CD/MD changers, the source selector XA-C40 (not supplied) is necessary.
BUS CONTROL IN
Connection diagram ɞ To a metal surface of the car
First connect the black ground lead, then connect the orange/white striped, yellow, and red power input leads.
ɟ To the power antenna control lead or power supply lead of antenna booster amplifier
BUS AUDIO IN
Notes • If there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times. Be sure to connect the black ground lead to a metal surface of the car first. • When your car has a built-in FM/AM antenna in the rear/ side glass, see “Notes on the control and power supply leads.”
ɤ To the +12 V power terminal which is energized at all times Be sure to connect the black ground lead to a metal surface of the car first. Notes on the control and power supply leads • The power antenna control lead (blue) supplies +12 V DC when you turn on the tuner. • When your car has built-in FM/AM antenna in the rear/side glass, connect the power antenna control lead (blue) or the accessory power input lead (red) to the power terminal of the existing antenna booster. For details, consult your dealer. • A power antenna without a relay box cannot be used with this unit. Memory hold connection When the yellow power input lead is connected, power will always be supplied to the memory circuit even when the ignition switch is turned off.
Connection example
BUS AUDIO IN
Be sure to connect the black ground lead to a metal surface of the car first.
ɣ To the +12 V power terminal which is energized in the accessory position of the ignition key switch
Notes on speaker connection • Before connecting the speakers, turn the unit off. • Use speakers with an impedance of 4 to 8 ohms, and with adequate power handling capacities to avoid its damage. • Do not connect the speaker terminals to the car chassis, or connect the terminals of the right speakers with those of the left speaker. • Do not connect the ground lead of this unit to the negative (–) terminal of the speaker. • Do not attempt to connect the speakers in parallel. • Connect only passive speakers. Connecting active speakers (with built-in amplifiers) to the speaker terminals may damage the unit. • To avoid a malfunction, do not use the built-in speaker leads installed in your car if the unit shares a common negative (–) lead for the right and left speakers. • Do not connect the unit’s speaker leads to each other. Note on connection If speaker and amplifier are not connected correctly, “Failure” appears in the display. In this case, make sure the speaker and amplifier are connected correctly.
Notes • It is not necessary to connect this lead if there is no power antenna or antenna booster, or with a manually-operated telescopic antenna. • When your car has a built-in FM/AM antenna in the rear/ side glass, see “Notes on the control and power supply leads.”
Source selector* Sélecteur de source* Selector de fuente* XA-C40 * not supplied non fourni no suministrado
BUS CONTROL IN
*1 Source selector (not supplied) Sélecteur de source (non fourni) Selector de fuente (no suministrado)
*4 *3
Supplied with the CD/MD changer Fourni avec le changeur de CD/MD Suministrado con el cambiador de CD/MD
XA-C40
*5 BUS AUDIO IN /AUX IN*2
AUDIO OUT FRONT
REMOTE IN
*6
L
*1
R
SUB OUT (MONO) from car antenna à partir de l’antenne de la voiture desde la antena del automóvil
3
Left Gauche Izquierdo
Right Droit Derecho
Left Gauche Izquierdo
Right Droit Derecho
AMP REM
*1 RCA pin cord (not supplied) *2 Be sure to match the color-coded cord for audio to the appropriate jacks from the unit. If you connect an optional CD/MD changer, you cannot use AUX IN terminal. *3 Auxiliary optional equipment such as portable DVD player (not supplied) *4 Supplied with the auxiliary equipment 5 * Supplied with XA-C40 *6 Insert with the cord upwards.
BUS AUDIO AUDIO AUDIO OUT OUT IN REAR FRONT
BUS CONTROL IN
AUDIO OUT REAR
Blue/white striped Rayé bleu/blanc Con rayas azules y blancas
Fuse (10 A) Fusible (10 A) Fusible (10 A)
Max. supply current 0.3 A Courant max. fourni 0,3 A Corriente máx. de alimentación de 0,3 A White Blanc Blanco White/black striped Rayé blanc/noir Con rayas blancas y negras Gray Gris Gris Gray/black striped Rayé gris/noir Con rayas grises y negras Green Vert Verde Green/black striped Rayé vert/noir Con rayas verdes y negras Purple Mauve Morado Purple/black striped Rayé mauve/noir Con rayas moradas y negras
ʔ Black Noir Negro
1
Blue Bleu Azul Light blue Bleu ciel Azul celeste
ANT REM Max. supply current 0.1 A Courant max. fourni 0,1 A Corriente máx. de alimentación de 0,1 A
Orange/white striped Rayé orange/blanc Con rayas naranjas y blancas Red Rouge Rojo Yellow Jaune Amarillo
2
ATT
4
ILLUMINATION
5 6 7
*1 Cordon à broche RCA (non fourni) *2 Veillez à faire correspondre le code de couleur du cordon audio à celui des fiches correspondantes de l’appareil. Si vous raccordez un changeur de CD/MD en option, vous ne pouvez pas utiliser la borne AUX IN. 3 * Appareil auxiliaire en option, par exemple un lecteur de DVD portable (non fourni) *4 Fourni avec l’appareil auxiliaire *5 Fourni avec le XA-C40 *6 Insérez avec le câble vers le haut. *1 Cable con terminales RCA (no suministrado) *2 Asegúrese de hacer coincidir el cable de audio codificado con colores con las tomas correspondientes de la unidad. Si conecta un cambiador de CD/MD opcional, no podrá utilizar el terminal AUX IN. *3 Equipo opcional auxiliar como un reproductor de DVD portátil (no suministrado) *4 Suministrado con el equipo auxiliar *5 Suministrado con el XA-C40 *6 Insertar con el cable hacia arriba.
9
MEX-BT5100
1
2 Face the hook inwards.
ʕ ʖ
Tournez le crochet vers l’intérieur. El gancho debe encontrarse en la parte interior.
q
q
q ʓ
1
2
3 Dashboard Tableau de bord Tablero
ʓ 182
ʖ
mm
53 m
m
Claws Griffes Uñas
ʓ
A TOYOTA
B NISSAN ʗ
ʗ
max. size 5 u 8 mm (7/32 u 11/32 in) Dimensions max. 5 u 8 mm (7/32 u 11/32 po) Tamaño máx. 5 u 8 mm
to dashboard/center console vers le tableau de bord/la console centrale al tablero o consola central
max. size 5 u 8 mm (7/32 u 11/32 in) Dimensions max. 5 u 8 mm (7/32 u 11/32 po) Tamaño máx. 5 u 8 mm
ʗ
Bracket Support Soporte
max. size 5 u 8 mm (7/32 u 11/32 in) Dimensions max. 5 u 8 mm (7/32 u 11/32 po) Tamaño máx. 5 u 8 mm
to dashboard/center console vers le tableau de bord/la console centrale al tablero o consola central
ʗ
Bracket Support Soporte
max. size 5 u 8 mm (7/32 u 11/32 in) Dimensions max. 5 u 8 mm (7/32 u 11/32 po) Tamaño máx. 5 u 8 mm
Bracket Support Soporte
Bracket Support Soporte
Existing parts supplied with your car Pièces existantes fournies avec la voiture Piezas existentes suministradas con su automóvil
A
Existing parts supplied with your car Pièces existantes fournies avec la voiture Piezas existentes suministradas con su automóvil
B q
Precautions • Choose the installation location carefully so that the unit will not interfere with normal driving operations. • Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperatures, such as in direct sunlight or near heater ducts. • Use only the supplied mounting hardware for a safe and secure installation.
Mounting angle adjustment
Mounting example Installation in the dashboard Notes • Bend these claws outward for a tight fit, if necessary (Ǹ-2). • Make sure that the 4 catches on the protection collar ʖ are properly engaged in the slots of the unit (Ǹ-3).
Mounting the unit in a Japanese car
Adjust the mounting angle to less than 45°. You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer.
Removing the protection collar and the bracket Before installing the unit, remove the protection collar ʖ and the bracket ʓ from the unit. 1 Remove the protection collar ʖ. Pinch both edges of the protection collar ʖ, then
pull it out.
2
Remove the bracket ʓ.
ɞ Insert both release keys ʕ together between the unit and the bracket ʓ until they click. ɟ Pull down the bracket ʓ, then pull up the unit to separate.
10
Note To prevent malfunction, install only with the supplied screws ʗ.
How to detach and attach the front panel Before installing the unit, detach the front panel.
Ǻ-A To detach Before detaching the front panel, be sure to press ůƕƌƌŰ. Press ůƕƖƋƔŰ, then slide the front panel to the right, and gently pull out the left end of the front panel.
Warning if your car’s ignition has no ACC position After turning the ignition off, be sure to press and hold ůƕƌƌŰ on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain.
RESET button Ǻ-B To attach Place the hole ʭ of the front panel onto the spindle ʮ on the unit, then lightly push the left side in.
When the installation and connections are completed, be sure to press the RESET button with a ball-point pen, etc., after detaching the front panel.
MEX-BT5100
(AEP, UK)
B
A
BUS AUDIO IN
AUDIO OUT FRONT BUS AUDIO IN BUS CONTROL IN
SUB OUT (MONO)
Source selector* Signalquellenwähler* Sélecteur de source* Selettore di fonte* Geluidsbronkiezer* XA-C40
AUDIO OUT REAR
BUS CONTROL IN * not supplied nicht mitgeliefert non fourni non in dotazione niet bijgeleverd
*1 Note for the aerial connecting *1 Hinweis zum Anschließen der Antenne If your car aerial is an ISO (International Wenn Ihre Fahrzeugantenne der ISO-Norm Organisation for Standardisation) type, use the (ISO = International Organization supplied adaptor ʔ to connect it. First connect for Standardization - Internationale the car aerial to the supplied adaptor, then Normungsgemeinschaft) entspricht, schließen connect it to the aerial jack of the master unit. Sie sie mithilfe des mitgelieferten Adapters ʔ *2 RCA pin cord (not supplied) an. Verbinden Sie zuerst die Fahrzeugantenne mit dem mitgelieferten Adapter und verbinden *3 Be sure to match the colour-coded cord for Sie diesen dann mit der Antennenbuchse des audio to the appropriate jacks from the unit. If Hauptgeräts. you connect an optional CD/MD changer, you *2 Cinchkabel (nicht mitgeliefert) cannot use AUX IN terminal. 4 3 * Auxiliary equipment such as portable DVD * Achten Sie darauf, das farbcodierte player (not supplied) Audiokabel mit den richtigen Buchsen am *5 Supplied with the auxiliary equipment Gerät zu verbinden. Wenn ein gesondert erhältlicher CD/MD-Wechsler angeschlossen *6 Insert with the cord upwards ist, kann der Anschluss AUX IN nicht *7 Supplied with XA-C40 verwendet werden. *4 Zusätzliche Geräte wie z. B. ein tragbarer DVD-Player (nicht mitgeliefert) *5 Mit den Zusatzgeräten mitgeliefert *6 Mit dem Kabel nach oben einsetzen *7 Mit dem XA-C40 geliefert
*2 *4
*5
*2
BUS AUDIO IN/ AUX IN*3
AUDIO OUT FRONT
*2
REMOTE IN
Source selector (not supplied) Signalquellenwähler (nicht mitgeliefert) Sélecteur de source (non fourni) Selettore di fonte (non in dotazione) Geluidsbronkiezer (niet bijgeleverd)
L R BUS AUDIO AUDIO AUDIO OUT OUT IN REAR FRONT
*1 from car aerial von Autoantenne de l’antenne de la voiture dall’antenna dell’auto van een auto-antenne
Max. supply current 0.3 A max. Versorgungsstrom 0,3 A Courant d’alimentation maximum 0,3 A Alimentazione massima fornita 0,3 A Max. voedingsstroom 0,3 A
AUDIO OUT REAR
ʔ
Fuse (10 A) Sicherung (10 A) Fusible (10 A) Fusibile (10 A) Zekering (10 A)
A
AMP REM
Blue/white striped Blauweiß gestreift Rayé bleu/blanc Rigato blu e bianco Blauw/wit gestreept
B
ATT
Light blue Hellblau Bleu ciel Azzurro Lichtblauw
BUS CONTROL IN
*7
XA-C40
ʕ
5
Notes on the power supply lead (yellow) • When connecting this unit in combination with other stereo components, the connected car circuit’s rating must be higher than the sum of each component’s fuse. • When no car circuits are rated high enough, connect the unit directly to the battery.
7
from the car’s power connector vom Stromanschluss des Fahrzeugs du connecteur d’alimentation de la voiture dal connettore di alimentazione dell’auto van de autovoedingsstekker
4
Yellow Gelb Jaune Giallo Geel
continuous power supply permanente Stromversorgung alimentation continue alimentazione continua continu voeding
5
Blue Blau Bleu Blu Blauw
power aerial control Motorantennensteuerung antenne électrique comando dell’antenna elettrica automatische antenne
6
• This unit is designed for negative earth 12 V DC operation only. • Do not get the leads under a screw, or caught in moving parts (e.g. seat railing). • Before making connections, turn the car ignition off to avoid short circuits. • Connect the power connecting lead ʕ to the unit and speakers before connecting it to the auxiliary power connector. • Run all earth leads to a common earth point. • Be sure to insulate any loose unconnected leads with electrical tape for safety. • Do not cover the ventilation slots or heat sinks of the unit.
1
3
5
7
2
4
6
8
from the car’s speaker connector vom Lautsprecheranschluss des Fahrzeugs du connecteur de haut-parleur de la voiture dal connettore del diffusore dell’auto van de autoluidsprekerstekker
See “Power connection diagram” on the reverse side for details. Näheres dazu finden Sie im „Stromanschlussdiagramm“. Blättern Sie dazu bitte um. Voir le « Schéma de raccordement d’alimentation » au verso pour plus de détails. Per ulteriori informazioni, vedere “Diagramma dei collegamenti di alimentazione” che si trova sul retro. Zie "Voedingsaansluitschema" op de achterkant voor meer details.
Be sure to install this unit in the dashboard of the car as the rear side of the unit becomes hot during use.
*1 Opmerking bij de antenne-aansluiting Indien uw auto is uitgerust met een antenne van het type ISO (International Organisation for Standardization), moet u die aansluiten met behulp van de bijgeleverde adapter ʔ. Sluit eerst de auto-antenne aan op de bijgeleverde adapter en vervolgens de antennestekker op het hoofdtoestel. *2 Tulpstekkersnoer (niet bijgeleverd) 3 * Zorg ervoor dat de kleurcode van het snoer voor audio overeenkomt met de bijbehorende aansluitingen op het apparaat. Als u een optionele CD/MD-wisselaar aansluit, kunt u de AUX IN aansluiting niet gebruiken. *4 Optionele apparatuur zoals de draagbare DVD-speler (niet bijgeleverd) *5 Geleverd bij de optionele apparatuur 6 * Plaatsen met het snoer naar boven *7 Geleverd met de XA-C40
Supplied with the CD/MD changer Mit dem CD/MD-Wechsler geliefert Fourni avec le changeur de CD/MD In dotazione con il cambia CD/MD Geleverd met de CD/MD-wisselaar
1
4
Cautions
*1 Nota per il collegamento dell’antenna Se l’antenna dell’auto è di tipo ISO (International Organization for Standardization), utilizzare l’adattatore ʔ in dotazione per collegarla. Collegare prima l’antenna dell’auto all’adattatore in dotazione, quindi collegarla alla presa dell’antenna dell’apparecchio principale. *2 Cavo a piedini RCA (non in dotazione) *3 Assicurarsi che i cavi differenziati in base al colore per l’audio corrispondano alle prese appropriate dell’apparecchio. Se viene collegato un cambia CD/MD opzionale, non è possibile utilizzare il terminale AUX IN. *4 Apparecchio ausiliario quale un lettore DVD portatile (non in dotazione) *5 In dotazione con l’apparecchio ausiliario *6 Inserire con il cavo rivolto verso l’alto *7 In dotazione con il modello XA-C40
*7
*6 SUB OUT (MONO)
*1 Remarque sur le raccordement de l’antenne Si votre antenne de voiture est de type ISO (Organisation internationale de normalisation), utilisez l’adaptateur fourni ʔ pour la raccorder. Raccordez d’abord l’antenne de voiture à l’adaptateur fourni et, ensuite, à la prise d’antenne de l’appareil principal. *2 Cordon à broche RCA (non fourni) *3 Veillez à faire correspondre le code de couleur du cordon audio à celui des fiches correspondantes de l’appareil. Si vous raccordez un changeur de CD/MD en option, vous ne pouvez pas utiliser la borne AUX IN. *4 Equipement auxiliaire comme un lecteur de DVD portable (non fourni) 5 * Fourni avec l’appareil auxiliaire *6 Insérez avec le câble vers le haut *7 Fourni avec le XA-C40
Orange/White switched illumination power supply Orangeweiß geschaltete gestreift Beleuchtungsstromversorgung Rayé orange/ alimentation de l’éclairage blanc commuté Arancione/ alimentazione illuminazione bianco commutata Oranje/wit geschakelde voeding voor verlichting
Connection example Notes (ǵ-A) • Be sure to connect the earth lead before connecting the amplifier. • The alarm will only sound if the built-in amplifier is used. Tip (ǵ-B- ) For connecting two or more CD/MD changers, the source selector XA-C40 (not supplied) is necessary.
Connection diagram ɸ To AMP REMOTE IN of an optional power amplifier This connection is only for amplifiers. Connecting any other system may damage the unit.
ɹ To the interface cable of a car telephone
6
8
7
Red Rot Rouge Rosso Rood
switched power supply geschaltete Stromversorgung alimentation commutée alimentazione commutata geschakelde voeding
8
Black Schwarz Noir Nero Zwart
earth Masse masse terra aarding
Positions 1, 2 and 3 do not have pins. An Position 1, 2 und 3 befinden sich keine Stifte. Les positions 1, 2 et 3 ne comportent pas de broches. Le posizioni 1, 2 e 3 non hanno piedini. De posities 1, 2 en 3 hebben geen pinnen.
2
3
4
Purple Violett Mauve Viola Paars
Grey Grau Gris Grigio Grijs
+
Speaker, Rear, Right Lautsprecher hinten rechts Haut-parleur, arrière, droit Diffusore, posteriore, destro Luidspreker, achter, rechts
5
–
Speaker, Rear, Right Lautsprecher hinten rechts Haut-parleur, arrière, droit Diffusore, posteriore, destro Luidspreker, achter, rechts
6
+
Speaker, Front, Right Lautsprecher vorne rechts Haut-parleur, avant, droit Diffusore, anteriore, destro Luidspreker, voor, rechts
7
–
Speaker, Front, Right Lautsprecher vorne rechts Haut-parleur, avant, droit Diffusore, anteriore, destro Luidspreker, voor, rechts
8
White Weiß Blanc Bianco Wit
Green Grün Vert Verde Groen
+
Speaker, Front, Left Lautsprecher vorne links Haut-parleur, avant, gauche Diffusore, anteriore, sinistro Luidspreker, voor, links
–
Speaker, Front, Left Lautsprecher vorne links Haut-parleur, avant, gauche Diffusore, anteriore, sinistro Luidspreker, voor, links
+
Speaker, Rear, Left Lautsprecher hinten links Haut-parleur, arrière, gauche Diffusore, posteriore, sinistro Luidspreker, achter, links
–
Speaker, Rear, Left Lautsprecher hinten links Haut-parleur, arrière, gauche Diffusore, posteriore, sinistro Luidspreker, achter, links
Negative polarity positions 2, 4, 6, and 8 have striped leads. An den negativ gepolten Positionen 2, 4, 6 und 8 befinden sich gestreifte Adern. Les positions de polarité négative 2, 4, 6 et 8 sont dotées de cordons rayés. Le posizioni a polarità negativa 2, 4, 6 e 8 hanno cavi rigati. De posities voor negatieve polariteit (2, 4, 6 en 8) hebben gestreepte kabels.
Warning If you have a power aerial without a relay box, connecting this unit with the supplied power connecting lead ʕ may damage the aerial. Notes on the control and power supply leads • The power aerial control lead (blue) supplies +12 V DC when you turn on the tuner, or when you activate the AF (Alternative Frequency) or TA (Traffic Announcement) function. • When your car has built-in FM/MW/LW aerial in the rear/side glass, connect the power aerial control lead (blue) or the accessory power input lead (red) to the power terminal of the existing aerial booster. For details, consult your dealer. • A power aerial without a relay box cannot be used with this unit. Memory hold connection When the yellow power input lead is connected, power will always be supplied to the memory circuit even when the ignition switch is turned off. Notes on speaker connection • Before connecting the speakers, turn the unit off. • Use speakers with an impedance of 4 to 8 ohms, and with adequate power handling capacities to avoid its damage. • Do not connect the speaker terminals to the car chassis, or connect the terminals of the right speakers with those of the left speaker. • Do not connect the earth lead of this unit to the negative (–) terminal of the speaker. • Do not attempt to connect the speakers in parallel. • Connect only passive speakers. Connecting active speakers (with built-in amplifiers) to the speaker terminals may damage the unit. • To avoid a malfunction, do not use the built-in speaker leads installed in your car if the unit shares a common negative (–) lead for the right and left speakers. • Do not connect the unit’s speaker leads to each other. Note on connection If speaker and amplifier are not connected correctly, “Failure” appears in the display. In this case, make sure the speaker and amplifier are connected correctly.
11
MEX-BT5100
1
2 ʗ ʖ
q
Face the hook inwards. Der Haken muss nach innen weisen. Tournez le crochet vers l’intérieur. Con il gancetto rivolto verso l’interno. Het haakje moet naar binnen wijzen.
q
q
ʓ
1
2
3 Dashboard Armaturenbrett Tableau de bord Cruscotto Dashboard
Fire wall Motorraumtrennwand Paroi ignifuge Parete tagliafiamma Brandschot
ʓ 182
mm
ʗ ʘ 53 m
m Claws Klammern Griffes Morsetti Klemhaken
ʓ
A
ʙ
B q
Precautions • Choose the installation location carefully so that the unit will not interfere with normal driving operations. • Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperature, such as in direct sunlight or near heater ducts. • Use only the supplied mounting hardware for a safe and secure installation.
Mounting angle adjustment Adjust the mounting angle to less than 45°.
Removing the protection collar and the bracket Before installing the unit, remove the protection collar ʗ and the bracket ʓ from the unit. 1 Remove the protection collar ʗ.
Pinch both edges of the protection collar ʗ, then pull it out.
2
Remove the bracket ʓ.
ɞ Insert both release keys ʖ together between the unit and the bracket ʓ until they click. ɟ Pull down the bracket ʓ, then pull up the unit to separate.
Mounting example
How to detach and attach the front panel
Auxiliary power connector Hilfsstromanschluss Connecteur d’alimentation auxiliaire Connettore di alimentazione accessoria Hulpvoedingsaansluiting
Before installing the unit, detach the front panel.
ǹ-A To detach Before detaching the front panel, be sure to press ůƕƌƌŰ. Press ůƕƖƋƔŰ, then slide the front panel to the right side, and pull out the left side.
ǹ-B To attach Place the hole ʭ in the front panel onto the spindle ʮ on the unit, as illustrated, then push the left side in.
Red Rot Rouge Rosso Rood
Red Rot Rouge Rosso Rood
Yellow Gelb Jaune Giallo Geel
Yellow Gelb Jaune Giallo Geel
Warning if your car’s ignition has no ACC position After turning the ignition off, be sure to press and hold ůƕƌƌŰ on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. 4
RESET button
Yellow Gelb Jaune Giallo Geel
When the installation and connections are completed, be sure to press the RESET button with a ballpoint pen, etc., after detaching the front panel.
Installation in the dashboard Notes • Bend these claws outward for a tight fit, if necessary (Ǹ-2). • Make sure that the 4 catches on the protection collar ʗ are properly engaged in the slots of the unit (Ǹ-3).
4
Yellow Gelb Jaune Giallo Geel
continuous power supply permanente Stromversorgung alimentation continue alimentazione continua continu voeding
7
Red Rot Rouge Rosso Rood
switched power supply geschaltete Stromversorgung alimentation commutée alimentazione commutata geschakelde voeding
Red Rot Rouge Rosso Rood
Red Rot Rouge Rosso Rood
Yellow Gelb Jaune Giallo Geel
Yellow Gelb Jaune Giallo Geel
switched power supply geschaltete Stromversorgung alimentation commutée alimentazione commutata geschakelde voeding
7
Red Rot Rouge Rosso Rood
continuous power supply permanente Stromversorgung alimentation continue alimentazione continua continu voeding
Red Rot Rouge Rosso Rood
Red Rot Rouge Rosso Rood
Yellow Gelb Jaune Giallo Geel
Yellow Gelb Jaune Giallo Geel
the car without ACC position Fahrzeug ohne Zubehörposition (ACC) Véhicule sans position ACC Auto priva della posizione ACC Auto zonder ACC-positie
12
MEX-BT5100 SECTION 3 DISASSEMBLY •
This set can be disassembled in the order shown below.
3-1.
DISASSEMBLY FLOW SET (FRONT PANEL BLOCK)
SET (MAIN BLOCK)
3-2. FRONT BACK PANEL ASSY (Page 13)
3-4. SUB PANEL ASSY (Page 14)
3-3. KEY BOARD (Page 14)
3-5. CD MECHANISM BLOCK (MG-611WA-186//Q) (Page 15)
3-6. MAIN BOARD (Page 15)
3-7. ANTENNA BOARD, IT BOARD (Page 16)
3-8. CHASSIS (T) SUB ASSY (Page 16)
3-14. SERVO BOARD (Page 19)
3-9. ROLLER ARM ASSY (Page 17)
3-10. CHASSIS (OP) ASSY (Page 17)
3-11. OPTICAL PICK-UP (KSS1000E) (Page 18)
3-12. SL MOTOR ASSY (SLED) (M902) (Page 18)
3-13. LE MOTOR ASSY (B) (LOADING) (M903) (Page 19)
Note: Follow the disassembly procedure in the numerical order shown below.
3-2.
FRONT BACK PANEL ASSY
claw RE claw
claw
three screws (B P-TITE M2)
claw claw
RG front back panel assy
claw two screws (B P-TITE M2)
RT claw
claw RB claw R claw claw claw
13
MEX-BT5100
3-3.
KEY BOARD
Note1: Please use a hexagon head wrench of 0.89mm when you remove hexagon socket set screw. KEY board
Note2: Please tighten by the torque of 1.5k when you install hexagon socket set screw.
hexagon socket set screw
knob assy (S)
3-4.
SUB PANEL ASSY
screw (PTT2.6 × 6)
connector (CN500) two claws
cover
two claws two screws (PTT2.6 × 6)
14
sub panel assy
flexible flat cable (22 core) (CN601)
MEX-BT5100
3-5.
CD MECHANISM BLOCK (MG-611WA-186//Q)
CD mechanism block (MG-611WA-186//Q)
bracket (CD) two screws (PTT2.6 × 4)
screw (PTT2.6 × 6)
screw (PTT2.6 × 6)
connector (CNP501)
3-6.
MAIN BOARD screw (PTT2.6 × 8) three ground point screws (PTT2.6 × 6)
RCA cord connector (CN301) screw (PTT2.6 × 8)
MAIN board
cord (with connector) (RCA) (SUB out (MONO)) screw (PTT2.6 × 8)
ground sheet (TU)
flexible flat cable (40 core) (CN503)
15
MEX-BT5100
3-7.
ANTENNA BOARD, IT BOARD
three ground point screws (PTT2.6 × 6)
lead wire with connector (ANTENNA board: CN1, IT board)
Remove the four solders.
RE IT board RT radiation sheet (SH)
RB shield plate (IT B)
four claws
Open the clamp.
flexible flat cable (40 core) (CN505)
ANTENNA board
screw (M1.7 × 3.5)
3-8.
CHASSIS (T) SUB ASSY
claw two screws (P1.7 × 2.2)
two screws (P1.7 × 2.2)
chassis (T) sub assy
SENSOR board
claw
16
MEX-BT5100
3-9.
ROLLER ARM ASSY washer roller arm assy gear (RA1)
spring (RAR-B)
spring (RAL-B)
3-10. CHASSIS (OP) ASSY chassis (OP) assy
coil spring (damper)
lever (D) gear (LE1)
optical pick-up flexible board (16 core) (CN1) two coil springs (damper) slider (R)
Remove the six solders.
tension spring (KF60)
17
MEX-BT5100
3-11. OPTICAL PICK-UP (KSS1000E)
chucking arm sub assy
claw
tension coil spring (CHKG)
optical pick-up (KSS1000E)
main shaft rack (SL) screw (B1.4 × 5)
3-12. SL MOTOR ASSY (SLED) (M902)
screw (P1.4 × 1.8)
SL motor assy (sled) (M902)
18
MEX-BT5100
3-13. LE MOTOR ASSY (B) (LOADING) (M903)
screw (M1.7 × 2.5)
gear (LE) assy
RE two toothed lock screws (M1.4)
bearing (LEB-N)
R screw (M1.7 × 2.5)
gear (LE1) RG LE motor assy (B) (loading) (M903)
RB screw (M1.7 × 2.5)
lever (D)
slider (R)
bracket (LEM-N)
RT
screw (P1.7 × 2.2) leaf spring (LE) Remove the two solders.
3-14. SERVO BOARD Remove the eight solders. Remove the three solders.
SERVO board
screw
claw
optical pick-up flexible board (16 core) (CN1)
19
MEX-BT5100 SECTION 4 TEST MODE
Joystick to right
Joystick to left
01 Reset frequency Joystick to right
Joystick to left
02 Reset frequency with watchdog timer Joystick to left
Joystick to down
Joystick to up
032 Number of connected slave units (History 2) Joystick to down
Joystick to up
033 Number of connected slave units (History 3)
20
Joystick to right
Joystick to left
04 Operating time Joystick to right
Joystick to left
051 CD error information (error content + error detailed) (History 1) Joystick to down
Joystick to up
Joystick to down
Joystick to up
052 CD error information (error content + error detailed) (History 2) Joystick to down
Joystick to up
052 CD error information (track kind + operating time) (History 2) Joystick to down Joystick to up 053 CD error information (error content + error detailed) (History 3) Joystick to down Joystick to up 053 CD error information (track kind + operating time) (History 3) Joystick to right
Joystick to left
061 OFFSET/FAILURE error (History 1) Joystick to down Joystick to up 062 OFFSET/FAILURE error (History 2) Joystick to down
Joystick to up
063 OFFSET/FAILURE error (History 3) Joystick to right
Joystick to left
Joystick to up
051 CD error information (track kind + operating time) (History 1) Joystick to down
DIAG MODE Mode that memorizes reset frequency and operating time, etc. in nonvolatile memory, and reads it. Procedure: 1. Turn off the setting of the bluetooth signal, and power supply is turned off. 2. Press the [4] t [5] t [4] ([4] is pressed for two seconds) button of the set sequentially, and enter the DIAG mode. 3. Following information is displayed when operating it according to Fig.1. Reset frequency Frequency to which [RESET] button is pressed and frequency of POWER ON RESET when power supply is turned on. Software reset when releasing test mode is not counted. Number of maximum counts: 254 times. Reset frequency with watchdog timer Reset frequency with watchdog timer. Number of maximum counts: 254 times. Number of connected slave units The number of an external connection of the SONY BUS slave unit is memorized by 3 histories or less. The SONY BUS slave unit that becomes an object is CD slave, MD slave, and undefined slave. Connected number in test mode is off the subject. Operating time Time that the set is operating (Every hour) is counted. Operating time in test mode is off the subject. Time of maximum counts: 65534 hours. CD error information CD mechanism error information in the head unit is memorized by 3 histories or less. The memorized content is error information, a track kind, and operating time (Every hour). Error in test mode is off the subject. Amplifier IC with built-in power supply error information Information on the OFFSET/FAILURE error with amplifier IC with built-in the power supply is memorized by 3 histories or less. The memorized content is error information and operating time (Every hour). OFFSET/FAILURE error in test mode is off the subject. 4. Press the [OFF] button of the set, and release the DIAG mode.
Joystick to down
Joystick to right
031 Number of connected slave units (History 1)
Joystick to down
Procedure: 1. Power supply of the set is turned off. 2. Press the [4] t [5] t [6] ([6] is pressed for two seconds) button of the set sequentially, and enter the service mode. 3. The version of each microcomputer confirmation screen is displayed. 4. Press the [OFF] button of the set, and release the service mode.
Joystick to up
1. Version Display
Fig.1 Method of operating DIAG mode
Joystick to up
SERVICE MODE The version of each microcomputer is displayed. The firmware can be updated.
MEX-BT5100 SECTION 5 DIAGRAMS 5-1.
BLOCK DIAGRAM - CD SERVO Section • R-ch is omitted due to same as L-ch. • Signal Path : CD PLAY
DETECTOR PD2
PD2
PD1
96 FPI2
PD1
88 AGCI RFEQO 83
RFO 89
81 RFI 82 RFRPI
94 FNI2
CD_L
LO 30 RO 27
A (Page 23)
R-CH
97 FPI1 I-V AMP
95 FNI1
E
E
F
F VC
100 TNI
RFRP 3
2 RFZI
98 TPI
TEI 6
7 TEZI PIO3 PIO0 MSTBY ZDET /RST /CCE BUCK(CLK) BUS3(SI) BUS2(SO) BUS1 BUS0
84 VRO
LASER DIODE
VC LD
PD
RF AMP,DIGITAL SERVO, DIGITAL SIGNAL PROCESSOR IC2
LD
AUTOMATIC POWER CONTROL Q21
91 LDO
MDI 92
MON OUT
DEC_XMUTE DEC_INT DEC_SSTBY CD_ZDET CD_XRST CD_XCCE CD_BUCK CD_BUS3 CD_BUS2 CD_BUS1 CD_BUS0
FOCUS/TRACKING COIL DRIVE, SLED/SPINDLE/LOADING MOTOR DRIVE IC1 FCS+ FCS–
UNI_SO UNI_CLK BUS_ON BU_IN SYS_RST LINK_OFF
A_ATT 60
A_ATT
TRK+ TRK–
M902 (SLED)
C (Page 23)
16 VO4–
OPIN4+ 27 OPIN4– 26
15 VO4+
OPOUT4 25
18 VO3–
OPIN3+ 24 OPIN3– 23
17 VO3+
OPOUT3 22
XI 23
VC 9 FOO
X2 16.934MHz
X1 12MHz
XO 24
81 X1 80 X0
M
10 TRO
14 VO1+
OPOUT1 4
12 FMO
13 VO1–
OPOUT2 7
13 DMO
SW1 (DOWN)
46 MEC_DSW
SW2 (SELF)
53 MEC_SELFSW
XFLASH & EJECT_OK 61
91 EJECT_OK 95 CDMON_IN 94 CDON_IN 93 CDMUTE_IN
MECON 63 CDON 64 ZMUTE 66 MECON_CHK 67
CD +6V
CDON_CHK 68
CD +3.3V +1.5V REG IC6
SW3 (DISC IN)
45 MEC_INSW
SW4 (LIMIT)
42 MEC_LIMIT
CD +1.5V
BIAS 20 M901 (SPINDLE)
M
12 VO2+
MUTE 21
11 VO2–
M903 (LOADING)
M
10 VOL+ 9 VOL–
FWD 1
LOAD
43 MEC LOAD
REV 28
44 MEC EJECT
21
21
+1.5V ON/OFF SWITCH Q2,3
M +1.5V
6 DRVON
MEX-BT5100
B (Page 24)
SYSTEM CONTROLLER IC501 (1/4)
(FOCUS) (TRACKING)
UNI_SI
56 25 57 26 58 50 51 75 59
CD SYSTEM CONTROL IC3
OPTICAL PICK-UP BLOCK (KSS1000E)
2-AXIS DEVICE
37 30 27 15 14 13 12 11 10 8 7
51 48 36 58 37 43 42 41 40 39 38
UNISI RXD UNISO TXD UNICKI BUS_ON BU_IN RSTX LINKOFF
CDON_1500MV 1
1.5V_ON
5
VOUT
VDD 1 CE 3
BU +3.3V
MEX-BT5100 5-2.
BLOCK DIAGRAM - BLUETOOTH Section BLUETOOTH MODULE IC500
A-OUT_P_L 4
MIC500
5
A-OUT_N_R
A-IN_N_L
A-OUT_P_R
A-IN_P_L
UART_TX UART_RX UART_RTS UART_CTS
9 LINE AMP IC504
10
(Page 23)
7 R-CH
8
: AUDIO
DATA BUS INTERFACE IC506
: BLUETOOTH OUT : BLUETOOTH IN
41 40 39 38
RXA TXA CTSA# RTSA#
TXB RXB
14 XTAL2
D0 – D7
5 7 38 33
X501 14.7456MHz 13 XTAL1
A0 – A2
8 4
DISP_TX DISP_RX
E (Page 24)
D0 – D7
A0 – A2
D0 – D15
A1 – A21 DQMLL RD
IOW# 15 IOR# 19
: MIC
FLASH ROM IC510
NOR_CS RD DQMLU
31 37 4 10
30 29 31 43 18 6 10 11
DQ0 – DQ15
A0 – A20
CE# OE WE RST
45 43 44 42 46
RESET SWITCH Q501
INTA INTB RXRDYA# TXRDYA# RXRDYB# TXRDYB# CSA# CSB#
36 RST SPI_MOSI SPI_MISO SPI_CLK SPI_CS RESET
• R-ch is omitted due to same as L-ch. • Signal Path
D
BT_L
26 – 29, 32 – 35, 38, 39, 41, 42, 44 – 47
A-OUT_N_L
1, 2, 5 – 8, 11 – 15, 17 – 25, 30
)
44 – 48, 1 – 3
PATTERN ANTENNA
28 – 26
(
2, 4, 5, 7, 8, 10, 11, 13, 74, 76, 77, 79, 80, 82, 83, 85, 31, 33, 34, 36, 37, 39, 40, 42, 45, 47, 48, 50, 51, 53, 54, 56
SD-RAM IC512
D0 – D31
22 – 27, 60 – 66
A2 – A14
DQMLL DQMLU DQMUL DQMUU SD_CLK SD_CKE SD_CS SD_RAS SD_CAS RD/WR
X503 12.5MHz
60 – 56, 54, 52 – 45, 43, 41 – 38, 36, 34 – 32, 30, 28 – 21
97 98 99 101 19 128 107 129 131 103 96 105
D0 – D31
179 XTAL BLUETOOTH CONTROLLER IC511
180 EXTAL
DQM0 DQM1 DQM2 DQM3 CLK CKE CS RAS CAS WE
DQMLL DQMLU DQMUL DQMUU SD_CLK SD_CKE SD_CS SD_RAS SD_CAS RD/WR RD NOR_CS
D0 – D31
A0 – A21
BS0, BS1, A0 – A10
DQMLL DQMLU DQMUL DQMUU SD_CLK SD_CKE SD_CS SD_RAS SD_CAS RD/WR RD NOR_CS
UART_INTA UART_INTB RXRDYA TXRDYA RXRDYB TXRDYB CSA CSB
61 – 63, 65, 67 – 74, 76, 78 – 85, 87
DOOR_SW SH_PW MAS_PW MAS_TX MAS_RX
9 10 218 181 167 166 108 110
MOSI MISO SPICLK SPICS BT_RST
A0 – A21 206 186 204 205 185
16 71 28 59 68 67 20 19 18 17
DQ0 – DQ31
EVOL_DATA 233 EVOL_CLK 111 DISP_PW 140 DISP_RST 114 ATT 120
EVOL_DATA EVOL_CLK DISP_IF DISP_RST ATT
H (Page 23)
J (Page 24) K (Page 23)
119 138 118 195 201
RESETP 220
D500
MAS_RX VOLTAGE DETECT IC517
MAS_TX
IT +3.3V
MAS_POW SH_POW DOOR_SW
OR GATE IC508 SELF_PRCT 113
IT_POW
G (Page 25)
MEX-BT5100
RESET
S500 (NOSE DETECT)
SH_RST NOSE_SW
CN701
CN902
10
20
22
22
L (Page 24)
MEX-BT5100
5-3.
BLOCK DIAGRAM - AUDIO Section AUDIO SELECT IC302
(Page 21) A
CD_L
6 IN1B
(Page 22) D
BT_L
7 IN2B
ELECTRICAL VOLUME IC301
OUTB 11
OUTLF 20
9 SE1L
CNT1 CNT2
11 DIFFL
2 4
R
R-CH
R
L
SDA SCL
SAOUT SAIN
MUTE
SW0 SW1
23 22
26 25
21
MUTING Q302
R-CH MUTING CONTROL Q307, 308
POWER AMP IC201 (1/2)
SDA SCL 1 ANT
12 FL
EVOL_DATA EVOL_CLK
TU_SDA TU_SCL S_METER TU_MUTE MUTE-CONDITION
14 13 6 7 8
E2P_SDA 17 E2P_SCL 16 QUALITY 5
1 9
LF– 3
4 R-CH
(Page 22)
A_ATT
C (Page 21)
ATT
K (Page 22)
R-CH SDA SCL VSM TU MUTE MUTE CON
10
LR– 7
3 R-CH
2 4 22 25
D304
FL– FR+ FR– RL+ RL– RR+ RR–
D512
• R-ch is omitted due to same as L-ch. • SIGNAL PATH : AUDIO : CD PLAY
(AEP, UK)
: TUNER
NS DET DISCHARGE SWITCH Q401
RDS 9
11
FL+
D305
TRDA TRCL QUALITY
12 2
LR+ 9
SDA SCL STB DIAG
11 RL
H
TUNER-LCH 4 TUNER-RCH 3
CNP101 (1/2)
LF+ 5
BUS_AUX
TUNER UNIT TUX401
J401 (ANTENNA IN)
AUDIO OUT REAR
SUB OUT (MONO)
MUTING Q305
R-CH
GROUND SWITCH Q306
AUDIO OUT FRONT
SUB/LR 16 MUTING Q301
L R
L R-CH
OUTLR 19
7 SE2L
PJ301 (1/2) BUS AUDIO IN/ AUX IN
PJ301 (2/2)
: AUX IN
MPX 16
MEX-BT5100
22 23 54 36 37 10 51 16 13 14 32 31
17 2
19
24 6 AMPSTB DIAG
(AEP, UK)
STB
DAVN
ATT
INTN 15
SDA SCL
NSMASK VOL_ATT
9 XTI
SDA 12 SCL 11
EESIO EECKO DAVN QUALITY VSM TUNATT TUN ATTIN AUX_BUS SIGNAL_SW0 SIGNAL_SW1 I2CSIO I2CCKO
X401 8.664MHz
10 XTO
TRDA TRCL DAVN QUALITY VSM TU MUTE MUTE CON BUS_AUX SW0 SW1 SDA SCL
RDS DECODER IC401
SYSTEM CONTROLLER IC501 (2/4)
23
23
M (Page 25)
MEX-BT5100
5-4.
- MAIN Section -
BLOCK DIAGRAM - DISPLAY Section -
SYSTEM CONTROLLER IC501 (3/4) FRONT PANEL CONTROLLER IC704
X701 5MHz
13 X2
DISP_RX
25 BUS_TX
DISP_TX
26 BUS_RX
E (Page 22)
26 25 27 28 18 68 3
MAS_RX MAS_TX MAS_POW
12 X1
SH_POW SH_RST DOOR_SW NOSE_SW
GUI_TX GUI_RX MAS_PW GUI_SW GUI_RST DOOR_SW NOSE_SW
XIN 77 XOUT 78 OSCIN 81 OSCOUT 80
J
RESET SIGNAL GENERATOR IC502
BU +3.3V
67 RAMBU
VOLTAGE DETECT IC702
OR GATE IC705
LED DRIVE Q801 – 803
51 41 54 52 42 55 39 27 50 46 37 30 47 45
FL_SO1 FL_SO2 FL_SO3 FL_CKO1 FL_CKI2 FL_CKI3 BK EDGE_TGR1 EDGE_TGR2 GCP_TGR3 LATCH GCP1 GCP2 GCP3
71, 73, 74
FLUORESCENT INDICATOR TUBE FL701
BLUETOOTH INDICATOR
10k 9k
75 RESET
BT_LED1, BT_LED2, BT_LED3
S601 RESET D506
B
CNP102 BUS CONTROL IN B-DATA
REMOTE CONTROL RECEIVER IC703
SYS_RST BUS_ON UNI_CLK UNI_SI UNI_SO BU_IN LINK_OFF
(Page 21)
BUS-ON
57 SIRCS
RESET
PUSH LIST
+BATT
77 ENTER
SONY BUS INTERFACE IC102
5
6
4
BUS ON/OFF SWITCH Q108, 109, 111
6
2 7
DATA I/O
TH351
BU-IN 52
B-CHK 10
B-CHK
DATA IN 9
1 BUS ON
DATA OUT 8 CLK-IN 11
2 RST
BUSON 12
57 UNISO 56 UNISI 58 UNICLK 85 BUSON D507
D125 3 BATT
RST-IN 13
20 SYSRST
BATTERY CHECK Q110 91 KEY2
BU B+
VOL
ENC701 (2/3), S709 – S714 89 KEY1
S701, 702, 901
ROTARY ENCODER ENC701 (3/3)
29 RE_IN0 30 RE_IN1
KEY ACTIVE SWITCH Q501
50 KEY ACK
74 AD_ON BUS SWITCH IC701
90 KEY0 D501 CNJ351 REMOTE IN
72 KEY0_SW Q701
89 RC_IN1 41 RC_IN0
39 KEYIN0
24
24
N (Page 25)
D121
4 CLK
S703 – S708
MEX-BT5100
AREASEL0 98
D511
B-CLK
ENC701 (1/3)
FREQUENCY SELECT
D503
RESET
LED801 – 803
S503
BU +3.3V
18 SH_IF 14 RESET#
(Page 22) FL +3.3V
X501 18.432MHz
L (Page 22)
DISP_IF DISP_RST
X502 32.768kHz
MEX-BT5100 5-5.
BLOCK DIAGRAM - POWER SUPPLY Section REGULATOR IC201 (2/2) 30 REG1
+8.4V RDS +3.3V
(Page 23) M
B+ SWITCH Q403, 404
STB BU +3.3V
SYSTEM CONTROLLER IC501 (4/4)
BT +3.3V
+3.3V REGULATOR IC503
FL +3.3V
+3.3V REGULATOR IC602
+3.3V REGULATOR IC504
CNP101 (2/2)
FLD_ON 88
5
SW1 29 IT +3.3V
IT +1.9V
+1.9V REGULATOR IC513
+3.3V REGULATOR IC514 +5V REGULATOR Q104 – 106
IT +5V
37 REG2
CD +3.3V
31 REG3
CD +6V
33 REG4
AMP-R AMT-R
BU B+ VP 35
SWITCING REGULATOR IC101
VOLTAGE DETECT Q117
IT_FSW_IN 7
BU +5V
6
SW2 27
19
+B
34 REG5
LED804 – 821 (KEY ILLUMINATION)
5 OUT2 OSC CONTROL SWITCH Q114
IT_FSW_SFT 63
2 RT
B+ SWITCH Q115, 116
CONT VCC 8 10
TH101
IT_POW 62 D127
VOLTAGE DETECT Q609, 610
IT_POW
G (Page 22)
B-CHK
N (Page 24)
VOLTAGE DETECT Q607, 608 +5V REGULATOR Q603
FL +5V
LED902 (KEY ILLUMINATION)
D607. 608, 610 FL +55V SWITCING REGULATOR IC601 VOLTAGE DETECT Q605, 606
POWER CONTROL SWITCH Q604
LED DRIVE Q112, 113
11 OUT1 LED903 (DISC SLOT ILLUMINATION) 9 OUT2
FSW_IN 8 OSC CONTROL SWITCH Q611
FSW_SFT 64
2 RT
B+ SWITCH Q601, 602
VCC 18
TH601
D616 FL_ON 87 DOOR_IND 61
ACC_IN 70
ILLIN 84
TELATT 83
ACCESSORY DETECT Q103
7
DIMMER DETECT Q102
14
TEL ATTENATION DETECT Q101
13 15
TEST_IN 96
MEX-BT5100
25
25
ACC
ILL
ATT TEST
MEX-BT5100
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. For Printed Wiring Boards.
For Schematic Diagrams.
Note: • X : Parts extracted from the component side. • Y : Parts extracted from the conductor side. • : Internal component. f : Pattern from the side which enables seeing. • (The other layers' patterns are not indicated.)
Note: • All capacitors are in μF unless otherwise noted. (p: pF) 50 WV or less are not indicated except for electrolytics and tantalums. • All resistors are in Ω and 1/4 W or less unless otherwise specified. • f : internal component. • C : panel designation.
Caution: Parts face side: (Conductor Side) Pattern face side: (Component Side)
Parts on the parts face side seen from the pattern face are indicated. Parts on the pattern face side seen from the parts face are indicated.
Caution: Parts face side: (SIDE A) Pattern face side: (SIDE B)
Parts on the parts face side seen from the pattern face are indicated. Parts on the pattern face side seen from the parts face are indicated.
MEX-BT5100
Note: The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
• Circuit Boards Location
SENSOR board
SERVO board
IT board ANTENNA board
Note: Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le numéro spécifié.
TUNER UNIT (TUX401)
• A : B+ Line. • Power voltages is dc 14.4V and fed with regulated dc power supply from ACC and BATT cords. • Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. – SERVO Board – no mark : CD PLAY – Other boards – no mark : TUNER (FM/AM) ( ) : CD PLAY * : Impossible to measure • Voltages are taken with a VOM (Input impedance 10 MΩ). Voltage variations may be noted due to normal production tolerances. • Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. • Circled numbers refer to waveforms. • Signal path. F : AUDIO f : TUNER J : CD PLAY p : BLUETOOTH OUT l : BLUETOOTH IN N : MIC E : AUX IN • Abbreviation CND : Canadian model
KEY board
MAIN board SUB board
26
26
MEX-BT5100
8
9
10
11
A
C52
C20
C45
C33 R28
C44 R38 R39 R40 TP72
TP25 C12 R11
R71
R75
FMB5
C62
TP76
FB2
CN2
R86
TP7
R141
TP9
R2
TP85 TP99
TP98 TP84
TP14 TP13
TP3
TP15
TP12
CNP501
TP86
TP8
(Page 37)
BP10
C7
1-866-806-
1-866-806-
• Semiconductor Location Ref. No.
Location
IC1 IC2 IC3 IC6
G-2 B-11 D-2 D-1
Q2 Q3 Q21
C-1 C-2 B-4
27
27
R1
IC1
TP87
TP11
FMA3
1-689-230-
TP4 TP5
SW1
MEX-BT5100
R74
R83
TP10
H
SW2
R84
TP83
TP1
R9
TP82 TP81 TP97
TP2
SW3
TP75
TP80 TP6
TP61
R67
R80
C11 R144
TP79
TP92
R147
TP63
R73
TP78
TP69
TP32
C43 R69 R21
TP77
TP91
FMA5
C10
FB3
X1
R96
TP90
TP33 TP52
TP62
TP74
TP89
C69 R98
TP70
R87
R97
R6
R5
X2
R37
R60 R62 R61 R78 R79 R81 R82 C67
C66
G
C68 R85
C40
TP31
R42 TP64
TP71
1
C70
C42 TP50
BP60
TP88
16
E
C41
R63
CN
IC3
TP68 TP67
C60
TP51
TP95
TP37
TP36 TP35 TP34
R29
TP22
D
R8
R36 C58
FMA4
R35
TP21
F
C22
C36 TP49
C39
C71
R77
IC2
R68
R30
R54 R53
R52
R19
R25
R34
R26
R24
R23
IC6
TP96
FB4
C133
R33
R22
Q2
R132
C32
C72
R20
Q3
TP44
TP53
C29
TP48 TP47
R133
C80 C132
C
R7
TP27
TP46
14
C47
C49
R32 R31
C30 R44 C15 R43
TP45
C31
C50 C53
TP42 C23 C25
TP43
C26
R10 R17
R14
TP28
R55
C16
R13
TP29
C13
R15
C24
TP23
R12
C54
C55
C14 C18
R58
C19
R27
B
C48
C46
C56
Q21
13
TP39 TP38
C51
TP41
FMB3
R41
TP30
C17 R16
TP26 TP24 FMA6
12
R57
7
R18
6
FMB4
5
TP65
4
R70
3
: Uses unleaded solder.
R65
2
1
•
R72
PRINTED WIRING BOARDS - SERVO Section - • See page 26 for Circuit Boards Location.
R64
5-6.
MEX-BT5100 5-7.
SCHEMATIC DIAGRAM - SERVO Section (1/2) - • See page 43 for Waveforms.
• See page 45 for IC Block Diagrams.
• See page 49 for IC Pin Function Description.
R7
C18
R10 R17 C46
R55 R43
C15 R54 R52
C44
TP37
TP34
R44
R53
TP35
C47
TP36
R57
C45
TP33
C49
TP32
C48
R18
IC B/D
R42
IC6
TP31 C50 C51
TP52 TP38
C52
C80
R22
TP39
C53
R23
TP53 R58 C54 C55 C56
IC2
R41
R24
R40
R25
R39
R26
R38
R27
Q2
R132 C132
C43
R133
TP41
C24 C19
CN1
C60
C133
C42 C41
C72
C11
R12
TP50
R29 R19
C40
R37
R30
C58
R36
C16
TP51
TP21 TP22
TP49
TP23 TP24
R13
TP25
R35
R11
C39
TP26
R33
TP27
R20
C33
R31
C22
C32
TP44
C20
TP28
TP43
TP42
C12
R32
C36
X2
FB3
TP48
TP47
TP45
C30 C31
TP46
R28
C29
R34
C26
C25
C13 C10
C23 Q21 TP29
R14
TP30
R15
FB2
C14
FB4 R16
C17
(Page 29)
MEX-BT5100
28
28
Q3
MEX-BT5100 5-8.
SCHEMATIC DIAGRAM - SERVO Section (2/2) -
• See page 43 for Waveforms.
• See page 45 for IC Block Diagrams.
• See page 49 for IC Pin Function Description.
(Page 28)
(Page 34) 2 3 CNP501
R97 TP88
TP81 TP82
R147
TP70
C67
C66
R75
R78
R98 R144
R85
R79
TP79 TP80
C68
R87
R81
TP92
R80
TP91
TP78
R82
TP90
TP77
R84
TP76
R77
R86
R83
TP89
TP68
TP75
TP67
CN2
TP74
TP69
R141
TP83
TP97
TP84
TP98
TP85
TP99
C69
TP86
R74
X1
TP87
R73 R72
R96
R71
C70 TP1 SW4 TP2
IC3 MB90486BPMC-G-177E1
IC B/D
TP65
R70
TP72
TP3 SW3
R5 TP64
R1 TP4 SW2
R6
TP5
TP71
TP63
R9 IC1
SW1
R69
R68
R2
TP62
C7 TP10
TP61
BP10
TP6 TP8 M902 TP9
29
29
R65
TP15
M901
C71
R63
TP13
R64
TP14
R62
TP7
R61
TP12
R60
TP11
R21
M903
MEX-BT5100
C62
BP60
R8
R67
MEX-BT5100 5-9.
SCHEMATIC DIAGRAM - BLUETOOTH Section (1/2) - • See page 43 for Waveforms.
• See page 45 for IC Block Diagrams.
(1/2)
R539 1k
C532 4.7
AUDO_NR
R556 1.8k R552 680 IC504(1/2) NJM4580V
R529 1.5k
AUDI_PL
C534 0.0022
C522 0.01 CN500 2P
C631 100p
MIC500
C521 0.01
MIC IN
R538 1k
C531 4.7
R573 100
1
3
AUDO_PR AUDI_NL
C540 680p
2
R550 680
BT_AUR
4 C539 680p
C550 100p
GND R546 1.8k
C558 22 L500 10uH
C513 1
C538 680p
5
R572 100
8 7
6
R548 680
C549 100p
BT_AUL
X501 14.7456MHz
NC
R545 1.8k
C507 1
AUDO_NL R542 1k
LINE AMP
C565 7p
R555 1.8k
A2
R582
C529 4.7
C541 680p
100
R551 680
XIN
IC504(2/2) NJM4580V C533 0.0022
XO
R543 1k
C530 4.7
AUDO_PL
R579 22k
RD
D501 MAZ8068GMLS0
R580 22k
NC
C543 0.1
R530 1.5k
DQMLL
C520 0.1
RXRDYB
C519 0.1
R583 1M
GND
IN
OUT C653 100p
C523 0.1
A0
SPICS_BT
AUDO_PL
UART_INTB
BT_RX UART_TX
USB_DP
PIO-04
USB_DN
PIO-05
PCM_CLK
PIO-06
PCM_SYNC
PIO-07
PCM_IN
PIO-08
PCM_OUT
PIO-09
AIO-00
PIO-10
AIO-01
PIO-11
AIO-02
RSV
AIO-03
GND
GND
BT_RTS
R558 0
DISP_TX BT_TX TXRDYB
XTAL1
XTAL2
GND
IOW#
RXRDYB#
RIB#
IOR#
DSRB#
CDB#
TXRDYB#
OP2A#
RXA
RTSA#
RXB
DTRA#
D7
BT_RX R560 220
DISP_RX D7
DTRB# RST R547 100
C536 100p
R553 2.2k
D6
D6
D5
D5
D4
D4
USB_VBUS
PIO-03
CSA
R591 0
TXA
IC506 XR16L2550IM-F
RXRDYA#
D3
UART_CTS
PIO-02
INTA
RXRDYA
BT_RTS
CSB
TXB
D0
PIO-01
UART_INTA
BT_CTS
UART_RTS
OP2B#
INTB
BT_TX
UART_RX
PIO-00
A0
(Page 31)
RB503 47
BT_CTS RB502 47
0.1
GND
CSA#
NC
A-OUT_P_L
NC
CSB#
A1
D1
SPI_CS
A2
A1
MISO_BT
D2
A-OUT_N_L
NC
A2
SPICLK_BT
TXRDYA#
SPI_MISO
CDA#
SPI_CLK
A-OUT_P_R
DATA BUS INTERFACE
MOSI_BT
SPI_MOSI
A-OUT_N_R
C524 4.7
BT_RST
RIA#
AUDO_NL
C514 4.7
VCC
AUDO_PR
C512 0.1
NC
RESET
CTSB#
A-IN_P_L
RTSB#
VDD/VREF
CTSA#
VDD
A-IN_N_L
GND AUDO_NR
NC
VDD
A-IN_P_R
DSRA#
AUDI_PL
A5
GND
A-IN_N_R AUDI_NL
VSS
IC503 XC6219B332MR
BLUETOOTH MODULE
A4
EN
+3.3V REGULATOR
IC500 CXN1401-5AAL
C562 7p
C553
UART_RST Q501 RT1P144M-TP-1
CN1
D3
D1
D2
TXRDYA
S500
(PATTERN ANTENNA)
D0
RESET SWITCH
A7
(NOSE DETECT)
NOSE_SW
R1 0
A11
A12 C573 1
A6 A10 A9
C572 0.1
A0
DQ2
DQ0
DQ5
D24
D27
D26 0.1
100p C619
C620
100p
0.1 C615
C614
0.1 C605
100p
D25
D28
D31
D30
D29
A6
A5
DQMUU
A9
A8
A7
A10
A11
SD_CLK
SD_CKE
DQMLU
D9
D8
D11
C604
C669
VSS
DQ25
DQ24
VSSQ
DQ26
DQ27
VDDQ
DQ28
DQ29
VSSQ
DQ30
N.C
VDDQ
VSS
DQ31
DQM3
A5
A4
A3
A6
A9
A8
A7
N.C
CLK
CKE
N.C
N.C
VSS
DQM1
DQ8
VDDQ
DQ9
DQ11
DQ10
VSSQ
DQ13
DQ12
VDDQ
DQ14
VSS
DQ15
VSSQ
VDDQ
DQ23
VDD
DQ22
DQ20
VSSQ
DQ21
VDDQ
DQ19
DQ18
DQ17
VSSQ
VDD
N.C
DQ16
DQM2
A1
A2
A0
A10
BS0
BS1
N.C
CS
RAS
CAS
DQM0
VDD
WE
DQ7
N.C
VSSQ
DQ6
DQ4
VDDQ
DQ5
VSSQ
DQ3
DQ1
DQ2
A11
A19 A7 A3
0.1
100p
100p
0.1 C623
0.1
100p
C617
C618
C621
100p C613
C622
0.1 C612
C624
0.1
100p
C606
C607
0.1
100p
C601
100p C597
C602
0.1
100p
0.1
C594
C595
C596
A12
A2
RST
VSS
A8
A6
WP
A18
DQ6
A17
A15
SD-RAM IC512 EM638325TS-6G
A10
DQ4
A9
A6
VDD
A14
NC
RY/BY
A21
DQ0
S29GL032A90BFIR40E-B510 ∗ CSP (Chip Size Package)
WE
A20
VDDQ
A1
DQ3
A3
RB504 47
A12
A2
IC510
A7
D6
A5
FLASH ROM
DQ1
D4
DQ7
A20
VSS
D3
A16
A19
VCC
DQ15
D1
CE#
DQ8
DQ12
DQ11
DQ13 RB505 47
RB523 47
A16 A11
A13
D15
C591 1
RB520 47
0.1
100p
RB514 47
A15
DQ9
A4
D13
DQ10
OE D11
DQ14
RD D9
BYTE
C590 1
D10
D12
D15
D14
D13
A1
D5
D2
D0
RB510 47
C600
47 RB508
D7
D8
A17
NOR_CS
D12
D10
47
100k R603
RB506
D14
A8
R626 100k R651 47 RB522 47
DQMUL
A3
A4
A2
A12
A13
A14
SD_RAS
SD_CS
SD_CAS
DQMLL
RD/WR
D7
D4
D5
RB519 47
D6
D3
D2
D1
D0
RB512 47
MEX-BT5100
30
30
D23
D22
D20
D21
D19
D17
D18
D16
A13
A9
FLS_RST
A18
A14
A5
A10
DQMLU
A4
A8
RB509 47
Note: When IC500 and 510 on the IT board are damaged, exchange the new IT board for the IT board which IC damaged.
MEX-BT5100 5-10. SCHEMATIC DIAGRAM - BLUETOOTH Section (2/2) - • See page 43 for Waveforms.
• See page 45 for IC Block Diagrams.
• See page 49 for IC Pin Function Description.
SD_CKE
SD_CAS
R584 4.7k
SD_RAS
SH_PW
DISP_PW
TXRDYB
RB500 4.7k
IC513 S-1170B19UC -OTET
R554 4.7k
RXRDYB
(2/2)
C652 100p
C574 7p
47
47
R709
R708
VSS
EN 0.1 C611
10k
0.1 C609
+3.3V REGULATOR
R653
100p
R648 10k
IN
NC
R650 10k
C667
47
47
100p
0.1
C672
C598
R710
0.1
100 R719
10k R637
C593
100p
470p
0.1
C588
C589
470p
100p
C587
C673
C671
100p
10k
0.1
C668
R638 10k
R649 10k
R711
0.1
D503 RSX101M-30 OUT
R654 10k
XO
R630
X503 12.5MHz
C586
R628
100
C662
C583
7p
C585 0.1
+1.9V REGULATOR
C640 10
IC514 BA33BC0FP-E2
C632 10
O
NC
G
CN505 40P
I GND
D502 RSX101M -30
NC XIN
GND 5.0V
A2 C634 22
5.0V
C665 100p
C636 22
A4
PINT9
TXDMNS
USB1D_SUSPEND
USB1DTXEL
USB1_OVR_CRNT
USB1PWREN
TXRDYA
USB2_OVR_CRNT
SD_RAS
SD_CKE
USB2DPWEN
PTJ1
VSSQ
SD_CAS
PTJ3
PTJ5
PTJ4
VCCQ
VSS
SH_PW
VCC
DISP_PW
TD0
MAS_FLSW
DRAK0
DISP_FLSW
WAIT
DACK
ADTRG
RESETM
PTG7
PTG4
ASEMD0
ASEBRKAK
VSS
AUDATA2
AUDATA3
VCC
AUDATA1
VSSQ
AUDATA0
TRST
TDI
TMS
VCCQ
TCK
RESERVED
TXRDYB
RXRDYB
MD0
VCC-PLL1
MODEL_SW
VSS
CAP1
VSS
CAP2
VSS
VCC-PLL2
VCC
SH_FLSW
XTAL
EXTAL
BT_AUL
TXRDYA
R623
47
VCCQ TXDPLS VSSQ
MISO
R717
100
ATT
R685
10k
R713
100
DOOR_SW
MAS_RX
FB500
MAS_PW
MAS_TX
FB501
DISP_RX
FB502
R564
0
PTH7
DISP_RST
VSSQ
SELF_PRCT
CKIO
MAS_RST
VCCQ
EVOL_CLK
SH_UART_TX
R714
100
DISP_RST
MAS_TX
10k
R657 10k R620
CSA
10k
R659
10k
R562
0
R612
10k
SIOMCLK
SD_CS
MAS_TX
CS2
SCK_SIO
NOR_CS
SIOFSYNC
(Page 30)
C579 0.1
R611
VCC
DQMUL
SCPT7
DQMLU
R690 1k UART_RST R627 10k
FLS_RST
47
C659
0.1
R609
10k
C663
0.1
C660
0.1
R608
10k
C647
0.1
C577
0.1
R689
10k
R688
10k
R634
10k
R635
10k
R601
100k
MOSI
PTK4
VSSQ
A25
LCD8
VCC
VCCQ
BLUETOOTH CONTROLLER
A24
LCD7
IC511 HD6417727F100CV
VSS
LCD5
A22
LCD4
VCCQ
LCD3
A21
LCD2
VSSQ
LCD1
A20
LCD0
A19
RXRDYA
A18
LCLK
A17
RESETP
A16
D500 DAP202U -T106
IC517 S-80930CLNB-G60
CA
A15
MD3
A14
MD4
A13 VCCQ
SCAN_TESTEN
VSS
C581 EVOL_DATA
A9
USB2_M
A8
AVCC-USB
A7
AVSS
A6
A4
AN4
VCCQ
AN5
A3 VSSQ
AVCC
SD_CS
47
FB507
SH_PW
FB508
SH_RST
FB509
DOOR_SW
FB510
MAS_PW
FB511
D0
D1
D2
VCCQ
D4
D3
VSSQ
D5
D6
D9
D8
D7
D10
D12
D11
D13
D14
VCCQ
D15
VSSQ
D16
D18
D17
VCC
D19
D21
D20
VSS
D22
D23
VSSQ
VCCQ
D26
D25
D24
D27
D30
D28
D29
D31
SD_CLK
VSSQ
VCCQ
BREQ
BACK
VCPWC
MD5
IRQ3
IRQ4
VEPWC
A0
UART_INTA
A1
AVSS
UART_INTB
AN7
R698 100
IRQ0
A2
A12
31
31
0.1
0.1
D0
D1
D3
D2
D4
D6
RB524 47
D5
D7
D8
D9
RB521 47
D10
D12
D14
D13
D15
D16
D11
RB518
47
C616
C610
0.1 C608 D19
47
A9
A11
D18
RB516
A8
A10
D17
C674 D20
D22
47 RB515
D21
D25
D24
D26
D23
47 D29
D27
D28
RB513
RB511 D31
D30
SD_CLK
UART_INTB
UART_INTA
100p
0.1 C603
0.1 C592 47
47 R647
10k
10k
10k R693
R639
10k R656
R642
10k
10k
R632
10k R629
R633
100p
0.1
C666
C584
A7
RB517 47
RESET_SW EVOL_DATA EVOL_CLOCK NC
SH_POWER SH_RESET DOOR_SW MASTER_POWER
NOR_CS
R703
47
RD/WR
R702
47
DQMUU
R701
47
DQMUL
R700
47
DQMLU
R699
47
DQMLL
R686
47
RD
DISP_PW
FB514
MASTER_FLSW
USB_POWER_ENABLE DISP_RST
FB517
SELF_PRCT
FB518
DISPLAY_RESET IT_POW MASTER_RESET GND D-
C599 100p
D+ ATT
C628 0.1
FB520
GND ATT GND GND GND
RB530 47 C627 0.1 A21 A20 RB529
47
A19 A18 A17 A16
47
A15 A14 A13 A12
C626 0.1
RB527
47
A11 A10
A8 RB526
47
A7 A6 A5 A4
C625 0.1 RB525
47
A3 A2
AN5
OR GATE
MEX-BT5100
47
A5
AN3
NMI
GND
C576 0.1
R712 47
R705
A9 USB2_P
MD2
C570 0.1
VCC
IC508 TC7SH32FU
A10
VSS-RTC
R610 10k
SELF_PRCT R696 100
A11
AVSS-USB
MD1
R695 100
USB_D-
EVOL_DATA
CD VDD C641 4700p
SH_RST
0.1
VSSQ
EXTAL2
OUT
C571 0.1
CSA
A12
USB_D+
VCC-RTC
R697 100
47
RB528
XTAL2
VOLTAGE DETECT
R706
A23
AVCC-USB RST_SW
NOSE_SW
RD
LCD6
R619
CSB
DISPLAY_TX
USB_OVER_CURRENT
DQMLL
SPICS
RXRDYA
FB506
EVOL_CLK
VSSQ
SPICLK
C578 0.1
FB505
EVOL_CLK
DISPLAY_RX
DISPLAY_POWER C629 0.1
SPICLK_BT
MOSI_BT
EVOL_DATA
DQMUU
MAS_RX
SPICS_BT
FB504
DISPLAY_FLSW
PTE7
VCCQ
RXD_SIO
10k
FB503
RD/WR
SH_UART_RX
C670 100p R606 220
47
R704
VSS MAS_RX
220
R707
DISP_TX RST_SW
NOSE_SW
220
R658
R621
PTK3
TXD_SIO
MASTER_RX
NC
R655 10k
CSB
SCK0 R613
AUDIO GND
MASTER_TX C630 0.1
SELF_PRCT C580 0.1
BT_AUDIO_R
10k
MAS_PW
BT_RST
MISO_BT
AUDIO_GND
R718 DOOR_SW
PTM0 BT_RST
BT_AUDIO_L
BT_AUR ATT
PINT
A6
+B(3.3V) GND
A5
A1 A0
(Page 34)
MEX-BT5100 5-11. PRINTED WIRING BOARDS - BLUETOOTH Section - • See page 26 for Circuit Boards Location. •
1
2
3
4
: Uses unleaded solder.
5
6
• Semiconductor Location
7
Ref. No.
ANTENNA BOARD (COMPONENTSIDE)
A
R1
ANTENNA BOARD (CONDUCTORSIDE)
CN1 1-869-288 21 1-869-288 -
MIC500
(21)
21 (21)
IT BOARD (CONDUCTOR SIDE)
B
D501
CN500
C631
2
C514
IT BOARD
C529 C532
IC500 BLUETOOTH MODULE C530
C513
R718
R546 R550
C598 C593 R638 C589 C586 C585
R710
R584
C587 R637 C588
R554 R719
R649
C609
C626
C627 C599 C628
RB526 RB527 RB528 RB529
(21)
C629 FB506
R621 R655
C630
C667 C611 R709 R708
121
R653 R654
C665
C625
RB530 1-869-235-
MEX-BT5100
C670
120
21
MAIN BOARD (Page CN503
R623
R688 R689 C577
RB513 RB511 C610
C616
RB516 RB515
CN505
C574 R630
R648 R650 R711
61 RB525
B
C662
60
R717 C634
IC511
C608 RB521 RB518 RB517
RB512
C596 C597
RB509
FB520
3
180
C603
R628
181
240
RB524
FB502
C591
C580
C592
C595
C590
C579
R656 R693
C594
RB510
C602
FB503
FB507
C674
C601
C600
R611 R606
R610
R639
C578
C647
C583
X503
R632
RB519 RB522
C621C623
C618 C622
R633
R647 C613 C612 C607 C606
IC512
RB514
R714
C617
C581
R558 R564
R713
D503
R685 FB511 FB510
C636
C660
C576
R562
R560 R591
R612
R686
G
R699 R707 R705 R703 R702 R701 R700
1
FB517 FB509
FB505 FB504
R706 R704
IC514
FB508
R626
2
1 C584 R629
C624
R642
R651
C573 FB514 FB518
C666
R634
FB501 FB500
C640
IC513
R603 C652
R627
R712
C605 C604
C672
RB506
48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
C615
RB504
IC510
3 1
4 5
RB520
RB505
A/K
IC508
C620 C619
RB523
R620 C572
C673
C659 C663
X501 C562
R613 RB500 RB508
R619
C614
C671 C668
RB503
R579
R601
R698 R609 R608 C570
C553 RB502
R690 R583 12 R582 C565
IC504 C558
D500 13
48
E
F
R697
IC506 1
C632
2 C571 1 K A
4
24
C539
R580
R635
25
37
D-1
C519
C543
C641
IC5173
C550 C549 R572
36
Q501
C538 L500 C507
C541
R696 R695
R556
C533 R551
C669
D
Q501
C522
R555
R547 C536 R553 R573 C540
R552
C521 R548 R545
C534
C520
R543
R538 R542
C531 R539
S500 NOSE DETECT
C-5 D-6 E-2 E-3 F-2 F-6 F-3 F-1 G-1 D-2
R529
R530
R659 R658 R657
C
IC503 IC504 IC506 IC508 IC510 IC511 IC512 IC513 IC514 IC517
C524
C523
IC503
(COMPONENT SIDE)
E-3 B-6 G-7 G-7
C653
C512
Location
D500 D501 D502 D503
D502
21 1-869-235-
36)
32
32
(21)
Note: When IC500 and 510 on the IT board are damaged, exchange the new IT board for the IT board which IC damaged.
MEX-BT5100 5-12. SCHEMATIC DIAGRAM - MAIN Board (1/3) -
• See page 43 for Waveforms.
• See page 45 for IC Block Diagrams.
Q301-305
(1/3)
MUTING TUX401 TUX032//Q
ELECTRICAL VOLUME
10k
ACINR ALINL
SAOUT
SA_DATA
SAIN
SA_CLK
ACOUTL (ANTENNA IN)
(AEP,UK)
E2P_SCL
R405 68k
C409 0.01
TU_LCH
C305
0.22
TU_RCH
C306
0.22
SCL
SDA
TU_RCH
C408 4.7 50V
C407 0.1
C406 0.01
C405 0.01
TU_LCH
(US,CND,E)
C401 0.01
(CHASSIS)
C308
1
50V
C310
1
50V
C312
1
50V
C314
1
50V
C316
1
50V
C317
10
SE2R SE1L SE1R DIFFL DIFFG
SCL
SCL MUTE R308
100
C307
100p
C320
10
50V
OUTLR
R309
100
C309
100p
C321
10
50V
OUTRR
R310
100
C311
100p
C322
10
50V
OUTRF
R311
100
C313
100p
C323
10
50V
SUB/LR
R312
100
C315
100p
C324
10
50V
R406 100
SWITCH C351 0.001
C318 100 10V
R317 100 Q304 TLC614TK
C331
100p
REAR
C326
100p
R /AUX IN L
R319 10k
R320 100 C332 100p
C325 0.001 R323 100
(EXCEPT AEP,UK) FRONT LCH+
Q306 RJK005N03 S
FRONT LCH-
GROUND
REAR LCH+
SWITCH
REAR LCH-
C415 330p
MUTE_CON
TU_MUTE
S_METER
(AEP,UK)
QUALITY
NS_MASK
C352 0.001
C413 100 16V
REAR RCH+ REAR RCH-
R410 1k
D401 MAZ8056 GMLS0
FRONT RCH+ R324 0
C414 0.01
C217 1
FRONT RCH-
C227 1
AMP REM MAX0.3A ATT
R331 2.2k C213 1 POWER AMP,REGULATOR
ANT REM MAX0.1A
C229 1
D302 1SS355WTE -17
IC201 TDA8588AJ
C334 47 16V
ILL ACC
Q307,308
R411 10k R413 1k
C422 47 35V C423 0.01
C201 0.22
R419 10
Q404 RT1N441C
VDDA
0.1
C418
0.1
C419
0.1
REF3 REF2
VSS
Q403,404 R415
C420 0.1
R417
TM
22
C203 0.01
MPX DAVN
INTN
C208 10 16V
CSN
R412
0
SDA
SCL
R414
0
SCL
XTO
R416
0
SDA
VDDD
100k
RESETN R418 10
C207 0.01
SA REF1
(AEP,UK)
10
16V
C231
10
50V
C154
0.22
C205
10
C204
0.01
C209
100
C206
0.01
D110
1SR154
C102
0.01
D109
1SR154
C101
0.01
D111 1SR154 D112 1SR154
C421 18p
XTI X401 8.664MHz
C425 0.1
B2
AUDIO SELECT IC302 NJM2750
SW0
R335
0
BT_R
C341
10
SW1
R336
0
IN1A CNT1 IN2A CNT2
CD_L
C343
10
50V
BT_L
C345
10
50V
IN4A
V+ IN3A VREF OUTB
IN1B IN2B
A3
IN4B
A15
NC IN3B
R338
A17
SW1
A18 SW2
CNP101 16P
0.1
C338
47
100k C349
0.1
R337
100k
R339
100k
16V
C342 10 50V
D306 RB551V
C225 47p
C339 47p
C223 0.22
SCL
R205 47k
C210 0.22
LR-
RR-
FL-
FL+
FR-
RL-
RL+
ATT
RR-
RR+
ILL
FR-
FR+
RR+
RRFR+
RF+
RR+
RFAMP-R
SW1
ANT-R
C212 1
C226 1
ACC
C219 1
C228 1
GND
AMP REM +B
D106 1SR154
LR+
D105 1SR154
LR-
D108 1SR154
LF+
C221
0.22
D107 1SR154
LF-
SDA
F101 10A 32V
B3
ACC
BATT
GND
GND
ACC
ILL
B4 B5
BATT
B6 B7 B8 B9
33
33
AMT REM
+B
0.22
A9
MEX-BT5100
ATT
TEST
C220
A7 A8
RR+
RL-
ILL
A5 A6
FR+
RR-
RL+
RR+ RF+
D104 1SR154
C222 22 25V
FL+
FR-
FL-
LR+ RF-
RR-
R206 150
RL+
FL-
(Page 34) FL+
LF+
SW2
C348
RL-
A16
D103 1SR154
C224 2.2 50V
GND OUTA
50V
(AEP,UK)
A14
R334 100k
50V
A13
16V
D102 1SR154
C211 0.22
10
BATT A11
LF-
(Page 35)
C335
GND R332 47
D304 1SS355WTE-17
16V
D101 1SR154
C337 47p
D305 1SS355WTE-17
A12
C424 18p
B1
CD_R
MUTING CONTROL Q308 RT1N441C
C202 10 16V
IC401 TDA7333013TR
C417
B+ SWITCH
C230
RDS DECODER
C416 0.1
(Page 34)
R
R322 10k
C412 0.01
A4
100p
Q307 RT1P141C
Q403 1SA1037AK
A2
C330
FRONT
BUS AUDIO IN
Q303 TLC614TK
Q305 TLC614TK
(AEP,UK)
A1
100p
D301 MAZ8068GMLS0
R321 100
+5V REGULATOR
(MONO) R325 0
R316 100 R318 10k
Q402 2SD1664
NS DET DISCHARGE
SUB OUT
R313 100
OUTLF
GND
C329
AUDIO OUT L
AUDIO OUT
SDA
DIFFR
50V
100p
L
MUTE
SE2L
Q302 TLC614TK
100p
C327
0.01
SDA
SE3R
CREF Q401 RT1N441C CN301 3P
C319
VDD
SE3L
C403 100 16V
E2P_SDA
R401 33k
R315 10k
2.2k
0.012
R305
MIX/ SUB/RR VREF
C328
2.2k
C304
ACOUTR
R327
0.012
R328
10k
C303
10k
R302
R
10k
R301 10k R304 10k
J401
R314 10k
IC301 TDA7419
C302 0.0015
R329
C301 0.0015
Q301 TLC614TK
R330
E2P_SDA
E2P_VDD
E2P_SCL
TU_SDA
GND
TU_SCL
VCC(8V)
PJ301 6P
(TUNER UNIT)
TU_VDD(5V)
RDS
TU_MUTE
MUTE-CONDITION
QUALITY
S_METER
TUNER-RCH
TUNER-LCH
ANT-GND
ANT
EEPROM
(Page 35)
AMT REM
MEX-BT5100
5-13. SCHEMATIC DIAGRAM - MAIN Board (2/3) -
• See page 43 for Waveforms.
• See page 45 for IC Block Diagrams.
• See page 49 for IC Pin Function Description.
(2/3) A12
A17 A16
A9 A8
(Page 33)
A6
A11
A5
A13
A7
A14
A4
A18
A2 A1 MUTE
A3
(Page 33)
+3.3V REGULATOR
SYS_RST
IC504 S1206B33-U3T1G O C515 0.01
IT_FSW_IN
SW0
TU_MUTE
100 R554
ATT
SH_RST
NS_MASK
100
100
100
R557
R555
R553
SH_TX
CD_MUTE L502 10μH
E2P_SDA
2.2μH
E2P_SCL
L503
SW1
D507 RB751V
VSS
I
A15
C516 100 16V
C517 330 10V
C518 1000 6.3V
C509 0.1
100k
SYS_RST
CD_ON
DR_GND
DR_GND RE1 SCL
C528 100 16V
R511
10k
R512
10k
R407 33k
C502 0.01
R409 68k
100 R548
10k
100k
R501
R525
100 R549
100 R550
FSW_IN
100
KEY_IN0
NC
SYSTEM CONTROLLER IC501 MB90F045PMC-G-9068-SPE1
BUSON
TELATT
NC
VCC3
NC
OSCIN
NC
OSCOUT
100k
100k R591
R590 (US,CND,AEP,UK)
(AEP,UK,E) 100
RC1
R547
100
FLD_ON
R546
100
R560
100
FL_ON
TELATT
R520
0
C506
15p
X501 18.432MHz
C504 0.01
C6 X502
C507 15p
32.768KHz
C7
AD_ ON
NC
NC
C9 C10
RESET
C11
SWITCH
DISP_IF
C12
DISPLAY_POWER MASTER_FLSW
C13
DISPLAY_FLSW MAS_PW
D510 RB751V
EVOL_CLOCK
R529
R528
0.1
100k
100k
100k
1k R535
R527
R530 33k
R573 100k
SA_DATA
EVOL_DATA
ACC
D505 1SS355WTE -17
C508 0.1
D503 RB751V
R519 100k
MASTER_RX AUDIO_GND
D511 RB705D
BT_R
IC502 XC61CN2802NR
BUS_ON
FSW_SFT
UNISO
DOOR_IND
R536
47k
SH_RX
UNICLK
MASTER_TX
SH_TX
DAVN
NC
SH_TX SH_RX
UNISI
DISPLAY_RX
R533
DISPLAY_TX
C512 2.2 50V
470k
RESET
MUTE_CON
(Page 31)
(AEP,UK) SA_CLK
C511
NC
R572
R523 68k
NOSE_SW
100k
100
SH_PW SH_POWER
100k
SH_RST
R534
SH_RESET
R540 100
C530 0.01
DOOR_SW
R526
MASTER_POWER
BT_AUDIO_R AUDIO_GND BT_AUDIO_L
BT_L RC0
GND +B(3.3V) +B(5.0V) +B(5.0V)
BU_CHK
GND
IT_POW(MASTER)
IT_FSW_SFT
GND S601 RESET
MEX-BT5100
(Page 35)
L501 2.2μH
RST_PROTECT
NC
DOOR_SW
ACC_IN
NC
RAMBU
FSW_SFT
FLASH_W
NC
R521 47k
KEY ACTIVE
NC
KEY ACK
Q501 RT1P141C
IT_FSW_SFT
XIN
NC
XOUT
MD2
UNISI
MD1
UNISO
VSS1
UNISCK
MD0
NC
DISP_RST
ILLIN
NC
NC
IT_POW(SH)
NC
DAVN
MASTER_RESET
USB_OVER_CURRENT
R541
NC
TUNATTIN
USB_GND
IT_POW
C1 TEST
FL_ON
BUIN
R516 100
D-
C5
EJECT_OK
ILL
R518 10k
USB_GND D+
100
C4
C513 0.01
FLD_ON
VSS RC_IN0
D501 MC2836-T112
ATT
ATT
CD_MUTE
R559
C3
C514 100 16V
CD_ON
RC_IN1
KEYIN0
GND
C2 CDM_ON
PARKING
NC
R517 10k
GND
9k
EJECT_OK
QUALITY
R515 100
VOL_ATT
NC
BEEP
NOSE_SW
AVRH
VSM CN503 40P
DIAG
CDMUTE_IN
10k
0
CDON_IN
AVCC
SELECT
R510 100k R569
CDMON_IN
AVSS
S_METER
USB_POWER_ENABLE
100
DEBUG TEST_IN
S503 FREQUENCY
R509 100k
AREASEL0
RE_IN1
I2CSIO R514 2.2k
NC AREA SEL2 AREA SEL1
RE_IN0
I2CCCKO
SDA
QUALITY
DISPLAY_RESET
R551
GUI_PW
RE0
DR_6V
FSW_IN
0
VSS
100
R563
NC
R545
SH_PW
GUI _TX MAS _PW
NC
MAS_PW
R513 2.2k
D512 RB751V
R508 100k
(US,CND,E)
CD_ON
C527 0.01
GND
R552
100 0.01
R556
100
C501
CDM_ON
100
IT_FSW_IN
CDM_ON
R544
TUNATT
A_ATT
BU_3.3V
GUI_RX SH_RX
SIGNAL_SW0
BU_GND
CD_L
NC
AU_LCH
SIGNAL_SW1
AU_GND
TEST(OPEN)
CD_R
NSMASK
AU_5V
C519 0.01
AUX_BUS
A_GND AU_RCH
(E) R507 100k
ATT
D_3.3V Z_MUTE
DR_6V
R504 100k
D506 RB751V
EJECT_OK C520 100 16V
SYSRST
A_3.3V
IT_POW
R575
0.1
EJECT_OK
D_GND
DOOR_IND
C531
OPEN_REQ
UNI_SO
GUI_RST
C526 0.01
UNI_SI
VCC5
C522 0.01
(US,CND) R503 100k
BU_CHK
EESIO
UNISO(CD)
(AEP,UK)
BU_IN
EECKO
UNI_CLK
UNISI
BUS_ON
AMPSTB
LINK_OFF
UNICLK
C525 100 16V
100
BUS_ON
LINK_OFF
C521 100 16V
R542
CNP501 28P
R558
(Page 29)
34
34
RESET SIGNAL GENERATOR
(Page 35)
MEX-BT5100
5-14. SCHEMATIC DIAGRAM - MAIN Board (3/3) -
• See page 45 for IC Block Diagrams.
(3/3) Q116 RT1N441C R144 10k R130 100
BUS INTERFACE CONTROL IC102 BA8271F
D121 RB715F
UNISI
GND
DATA OUT DATA IN
UNISO(CD) UNISO
RB751V
D122
MAZ8180GMLS0
D123
MAZ8180GMLS0
C113
470
R127 330k
R128 330k
L101 0μH
D114 1N5404-C311-3
B3 B4
16V
Q115,116
B7
BATT
C121 0.0015
RST
B8
TEST
S
C123 0.0022
B9 Q115 2SJ360
R103 47k
R141 30k
R104 10k
C112 0.1
Q114 RT1N141C
D129 MAZ8180 GMLS0
R129 47k Q117 RT1N141C VOLTAGE DETECT
Q109 RT1N141C
D130 MAZ8068GMLS0 Q108,109,111
TH351
Q108 RT1N141C Q110 RT1N141C BATTERY CHECK
DTC
C122 100 16V
R145 1k
C117 R120 10
D128 RSX501LA-20 L104 47μH
C124 0.001
D118 MAZ8051GMLS0
R121 510
C126 470p
R119
22
1/2 VREF
CT
INV
FB
VREF
OUT
CTL
N.C
SCP
GND
R131 15k R118 1.5k
+3.3V REGULATOR IC602 MM1613DELE
D126 MAZ8180 GMLS0
IT_FSW_SFT
LINK_OFF R134 1k
C1
NOISE
Q102 2SC2412K
C119 0.1
C105 4.7 50V
R110 22k
R109 10k
ACC
C118 0.1
R111 10k
R112 47k Q103 2SC2412K
R139 100k
R113 4.7k
ACCESSORY DETECT
R114 47k
C106 1 50V
R115 10k
R122 10k (CHASSIS)
L604 2.2μH
VOUT C619 220 10V
C3 FLD_ON
C620 0.1
D127 MC2838-T112
Q104 - 106
C621 0.1
Q113 RT1P141C
IT_POW(SH)
+5V REGULATOR
IT_POW(MASTER)
Q112,113
R137 150
IT_FSW_IN
(Page 34)
D116 1SS355WTE-17
R116 1k VIN
C622 0.01
C2
R107 10k
DIMMER DETECT
C111 1
Q104 2SJ518AZTR
CONT GND
ILL
R142 10k
VCC
R101 1k
D115 MAZ8180GMLS0
R108 100k
S
R117 1k
R106 10k
NON
RT 100p
R123 15k
D125 MAZ8062 GMLS0
Q111 RT1N141C
Q105 2SC2412K
R138 27k
R133 4.7k
BUS ON/OFF SWITCH
Q106 2SA1037AK
C127 47p
IC101 BD9300FV
R105 1k
Q101 2SC2412K TEL ATTENATION DETECT
SWITCHING REGULATOR
OSC CONTROL SWITCH
C109 0.1
(Page 33)
TELATT
BUSON
C108 0.1
BU_CHK
B5 B6
R124 1k
R125 1k
R102 1k
D113 MAZ8068GMLS0
B+ SWITCH
CLK
VCC
C104 0.22
C125 47 25V
VREF
BUSON RST _IN
SYS_RST
C103 3300 16V
TH101
CNP102 BUS CONTROL IN
CLK-IN
BUS_ON
L103 47μH R143 47k
DATA I/O
B-CHK
UNICLK
D124
LED DRIVE
C4 R136 150
C5 DOOR_IND
R650 100k
Q609 2SC3052
C627 0.22
TH601 R653 1k
R651 10k
R654 2.2
R655 2.2
R656 2.2
D601 1SR154
R657 2.2 Q601,602
VOLTAGE DETECT
FSW_SFT
CNJ351
IN
S
R621 47k
SWITCHING REGULATOR
C609 10
R652 10 L602 47μH
R658 100k
R610 12k R607 24k
C610
REGULATOR
C631 150p
S
C605 220p
R602 22k
R608 22k
Q603 2SJ360 +5V
R604 10k R603 15k
R659 470
C630 0.0015
R641 15k
D605
0.0015
R611
6.8k
RB751V
C612 2.2
R660 1k
D615 MAZ8051 GMLS0
GND
RT
STB
C624 0.1
CT
VCC
C606 1
NON2
VREF
INV2
INV1
FB2
FB1
DTC2 R613 470k
R642 22
IC601 BD9851EFV SEL1
C629 0.001
L603 150μH
C603 100 16V
R629 1k
D614 MAZ8180GMLS0
R606 33k
DTC1
OUT2
PVCC1
PGND
OUT1
C611 0.22
R616 330k
R663 470 Q604 2SK2963
1.5k
R622 68k
C632 470p
C615 0.47
D607 RB160M60
D608 RB160M60
D610 RB160M60
1SR154
D629
MAZ8068GMLS0
D620
MAZ8068GMLS0
D603
MAZ8180GMLS0
FL-VSS
D628
MAZ8062GMLS0
RE0
D627
MAZ8056GMLS0
RE1
D626
MAZ8056GMLS0
R648
100
KEY_IN0 DISP_RST
R649
100
D625
MAZ8062GMLS0
SH_RX
R664
100
D624
MAZ8062GMLS0
SH_TX
R665
100
D623
MAZ8062GMLS0
DISP_IF
R666
100
D622
MAZ8062GMLS0
D621
MAZ8062GMLS0
FL-F2(-,+1.0V) FL-VDD1(3.3V) LED+10V DOOR_SW RE_IN0
D604
MAZ8068GMLS0
C604
0.001
RE_IN1 KEY_0 RESET(DISPLAY) DISP_TX
(Page 39)
DISP_RX DISPLAY_CONTROL DP_FLS_W GND VBUS
DR638 10
C616 56 63V
R639 10
R640 10
R644 100k
R643 100k
USB_GND R636 47k
Q608 2SA2114
R634 47k
C625 0.22
R635 100k
Q607 2SC5625
CONTROL S
SWITCH
C617 0.47
C6 C7
Q605 2SC5625
R637 1k
C613 0.47
R615 150k
R645 100k R662
R631 100k
Q606 1SA1235AC1TP
R605 22k
SCP
PVCC2
D617
C633 0.001
D+ C608 0.047
R661 1k
C614 10
R628 4.7k
R609 1k R612 680
R630 10k
R627 4.7k
POWER R646 100k
R633 100k
Q602 RT1N441C
L601 100μH
C607 100 16V D606 RSX501LA-20
R632 10k
Q601 2SJ360
R132 100
RC1
D616 RB751V
R601 10k
RC0
DOOR_IND(+BATT)
MAZ8068GMLS0
FL-VDD2(+55V) Q605-608
FL_ON
REMOTE
D611
FL-F1(+,+4.3) D602 1SR154
B+ SWITCH
Q611 RT1N141C OSC CONTROL SWITCH
CN601 22P GND
Q610 ISA1235AC1TP
C115 0.001
Q112 RT1N441C
R135 150
Q609,610 VOLTAGE DETECT
C618 0.1 100V
FSW_IN C623 0.1
C9 C10 C11
(Page 34)
C12 C13
B1 B2
(Page 33) (CHASSIS)
MEX-BT5100
35
35
MEX-BT5100 5-15. PRINTED WIRING BOARD - MAIN Board (Component Side) - • See page 26 for Circuit Boards Location. • Semiconductor Location
1
Location
6
7
8
9
Q114
R138 E R129 Q106
R119
E
R523 51 50
76
R120 D128 R520
L104 C124
Q105
D301 C325 R323
R322
R312
R311
R536 C530
R518
C108
7
75
R540 C511
R517 K
100
26 R563
R501 R590
F
(E)
R551
R591 R509
C501 R552
R549
US, CND, AEP, UK
R553
R550 1
2
R542
R512 R511 R545
R558 R556
E
R557
R555
R510 (E)
25
R554
1
(CHASSIS)
A D501
K
R515 C502
IC501
Q104
D401 R410 Q501
E
R572
R573
C414
R521
C415
D304
1
A
1
Q403
IT BOARD CN505
4
D623
R665
C423 1
3
IC602
CN503
8 C425 R417
C620
5
L604
D625 R664 D621 39 40
D622
D624 D511 K
A A
C621
D628 D627
D620
R627 C633 R628
(Page 32)
R631
R630
H
9
IC401
C623
D626
G
16
R413 R411 E
C622
B
(AEP, UK)
R414
Q404
Q606
Q605
D616
D507
E
D305
C609
R653
Q115 R121
(AEP, UK)
D503 R535
R144
C111 R122 C117
R145
R514
C627
E
8
R143
E
14
2 R519 D505
R544
R650
C121 R123
C526
3
1
C508
C126
L602
Q609
A
IC502
D130
C509 D127
L103
Q608
R575
Q603 D606
C522
Q610
R602 C605
C629
R635 EQ607
K
TH101
IC101
E
C531
R663 R645 C630
4
E
R513
C513
Q117
R530
IC504
R637
R657 R656 R655 R654
C610
R640 R639 R638 C625 R636
R651
E
L501
E
R634
R658
R610
L502
L503
Q604
C515
R612
E
Q401
R339
R412
R336
C608
(AEP, UK) R406
C417 C418 C419
D602
C305
R305
R335
R304
D601
R321
R302
IC302
L601
IC601
C309
IC301 R338
D
R308
R325
D306
Q308
E
R629
E
C306
R137 Q113
E E
(CHASSIS)
C313
R301
Q307
R103
R110
Q102
R114 R113
D302
E
R108
R107
E Q103
Q101
R331
C315
R205
E
R112
R621
Q601
R105
R332
C223
R115 R111
A A
D115 R104 R106
C112
D116
K D121
D112
R109
C
R206 C307
Q110
C311
C225
D111
D103
D101
E
Q306
E Q305 E
E
E
Q301
Q304
R309 R310
D105
E
C213 C229
D108
D106
D104
D107
C219 C228
Q302
Q303
C227
C217
C212 C226
R101
D113
D126
D125
D102
R102
R134
R131
Q109
C102
D110
E Q111
IC102
D124 D122
D109
E E
R132 D123
R133
R130
Q108
C115
C101
B
L603
C-3 C-4 C-3 E-5 E-5 E-4 B-2 B-2 C-3 B-3 C-5 E-4 E-5 D-7 B-7 B-8 B-8 B-7 B-8 B-8 C-4 C-4 D-9 F-9 F-9 E-8 D-2 E-2 D-2 H-9 H-9 E-3 E-3 E-3 E-3 E-1
5
MAIN BOARD (COMPONENT SIDE)
R652
Q101 Q102 Q103 Q104 Q105 Q106 Q108 Q109 Q110 Q111 Q113 Q114 Q115 Q117 Q301 Q302 Q303 Q304 Q305 Q306 Q307 Q308 Q401 Q403 Q404 Q501 Q601 Q603 Q604 Q605 Q606 Q607 Q608 Q609 Q610 Q611
4
: Uses unleaded solder.
A
R611
E-5 C-2 C-7 D-6 F-9 E-8 D-8 D-6 E-2 G-8
3
R659
IC101 IC102 IC301 IC302 IC401 IC501 IC502 IC504 IC601 IC602
2
C624
C-4 B-4 C-4 B-4 C-5 B-4 B-4 B-4 B-3 B-3 C-5 C-5 C-3 C-3 C-3 C-2 C-2 C-2 C-2 C-3 C-3 E-5 E-6 E-7 B-8 C-4 E-4 F-4 C-6 E-8 E-8 E-8 E-8 E-3 H-6 D-3 D-3 E-2 H-9 G-8 G-8 G-8 G-8 G-8 G-8 G-8 G-8 G-8
Ref. No.
R608 R607 R641 C631 R646
D101 D102 D103 D104 D105 D106 D107 D108 D109 D110 D111 D112 D113 D115 D116 D121 D122 D123 D124 D125 D126 D127 D128 D130 D301 D302 D304 D305 D306 D401 D501 D503 D505 D507 D511 D601 D602 D606 D616 D620 D621 D622 D623 D624 D625 D626 D627 D628
Location
Q611
Ref. No.
•
R632 E R633
21 1-869-284-
MEX-BT5100
36
36
(21)
(CHASSIS)
MEX-BT5100 5-16. PRINTED WIRING BOARD - MAIN Board (Conductor Side) -
1
2
• See page 26 for Circuit Boards Location.
3
4
5
•
: Uses unleaded solder.
6
7
8
9
10
11
PJ301 BUS AUDIO IN/ AUX IN
A
AUDIO OUT REAR
AUDIO OUT FRONT
(FRONT VIEW) 6
MAIN BOARD
L
R
L
R
L
R
5
F101
(CONDUCTOR SIDE)
CNP102
4
8 3
2
CNJ351
BUS CONTROL IN
7
REMOTE IN
1
J401 (ANTENNA IN) (AEP, UK) GRN
C328
C327
C329
C201
C109
R320
C205
R528
(US, CND, E) (AEP, UK, E)
C416
C421
(AEP, UK)
(US, CND) R504
C424 R415
S503
R125
C616
R139
R661
C615
R613
C525
21 1-869-284-
(21)
1
9
2
10
3
SERVO BOARD CN2
5
11 12 13
(Page 27) 6
14
7
15
8
16
R548
• Semiconductor Location D114 D118 D129 D506 D510 D512 D603 D604 D605 D607 D608 D610
2 S601 RESET
CN601 C604 D629
MEX-BT5100
12
5
13
6
14
7
15
8
16
D604
D611
(Page 38)
37
37
VIO/BLK GRY/BLK LIGHT BLU BLU/WHT ORG/WHT
ATT AMP REM MAX 0.3A
YEL
BLK ORG/WHT YEL
NC
(EXCEPT AEP, UK)
C607
C528
A
D510
SUB BOARD CN901
4
GRN/BLK
D605 D608
Ref. No.
C
11
WHT/BLK
R604
4
R666
H
VIO/BLK
C612
D506
S503 FREQUENCY SELECT 9k
R649
D603
GRY/BLK
C617
R117
C619
D617
3
NC
C422
21
10
NC BATT
ANT REM
C611
R616
D615
R662
C420
22
2
NC
C606
R418
R648
9
BLU
C613
R606
R660
R141
C123
R622
C632 R605
D610
C127
10k
R508
R615
D512
G
WHT/BLK
R603
C118
R142
C506
C122
C119
(E)
R507
R525
R419
R116
R569
R541
1
ACC GND
RED
R609
R118
D118
R547
R642
D607
C527
R409 C412
X401
X501
C504
R559 (AEP, UK) R503
R416
C125
R546 R527
F
C507 X502
R560 R529
R516
FR–
D614
C614
Q116
C413
C406
R644 R643
R534
R601
C343
C603
C341
C519
C339
C514
C618
CNP501
C403
R526
RED BLK
C405
R533
L101
Q602
C520
Q402
TH601
C106
C105
C334
C517
C401
E
R124
C103 Q112
R135
C516
R407
VIO
TH351
GRY
R136
C345
R337 C312
R127
BLU
C335
C303 C304
C310
C308
C348
C342
C512
R401
R334 C349
(AEP, UK)
C408
R405
C407
GRN
C518
C338
C337
C316
C302
C314
C409
C230
C222
C351
(US, CND, E)
C202
C209
C301
C324
D
C206
WHT
R128
D114
C231
C320
C154
C208 R324
FR+
C318
C319 C317
1
TUX401 (TUNER UNIT)
C332
C113
C204 C323
R313
C224
CN301
C352
FL–
RR+ RR–
VIO
CNP101
FL+
GRN/BLK
R319
R317
3 SUB OUT (MONO)
GRY
TO CNP101
RL–
R314
R318
R315
C322
R316
R329
C321
R328
R327
IC201 R330
WHT
D129
C211
B
C
C221
C104
C330
C210
C521
C326
C220
C207
C203 C331
RL+
Location C-8 E-6 B-8 F-8 G-3 F-4 H-3 H-3 E-9 E-8 E-8 E-8
Ref. No.
Location
D611 D614 D615 D617 D629
H-2 D-9 E-9 H-2 H-4
IC201
B-5
Q112 Q116 Q402 Q602
C-6 E-6 E-2 D-8
WHT/BLK WHT GRN/BLK GRN VIO/BLK VIO GRY/BLK GRY LIGHT BLU BLU/WHT ORG/WHT BLU RED YEL BLK
FRONT LCH (–) FRONT LCH (+) REAR LCH (–) REAR LCH (+) REAR RCH (–) REAR RCH (+) FRONT RCH (–) FRONT RCH (+) ATT AMP REM MAX 0.3A ILL ANT REM MAX 0.1A ACC BATT GND
MEX-BT5100
5-17. PRINTED WIRING BOARD - SUB Board - • See page 26 for Circuit Boards Location.
1
2
3
•
: Uses unleaded solder.
4
5
6
SUB BOARD (COMPONENT SIDE)
A
B
LED902, 903 A S901 ;
R903 CN902
D902
K LED903 DISC SLOT ILLUMINATION A K D903
K A LED902 KEY ILLUMINATION
21 1-869-287-
(21)
C D
KEY BOARD CN701
(Page 42)
SUB BOARD (CONDUCTOR SIDE)
D
21 1-869-287-
E
CN901
F C
MAIN BOARD CN601
(Page 37)
MEX-BT5100
38
38
(21)
MEX-BT5100
5-18. SCHEMATIC DIAGRAM - SUB Board -
LED902 CL-190UB2-
LED903 CL-270UB2-
KEY
DISC SLOT
ILLUMINATION
ILLUMINATION
CN901 22P GND
R903 100
D902 MAZ8068GMLS0
D903 MAZ8068GMLS0
DOOR_IND(+BATT) FL-F1(+,+4.3) FL-VSS FL-VDD2(+55V) FL-F2(-,+1.0V)
S901
FL-VDD1(3.3V) LED+10V
CN902 20P
DOOR_SW
(Page 35)
RE_IN0
DOOR_SW
RE_IN1
FL-F1(+,+4.3)
KEY_0
FL-VSS
RESET(DISPLAY)
FL-VDD2(+55V)
DISP_TX
FL-F2(-,+1.0V)
DISP_RX
RE_IN1
DISPLAY_CONTROL
RESET(DISPLAY)
DP_FLS_W
GND
GND
GND
VBUS
KEY_0(KEY_ACK)
D+
NC
D-
USB_GND
USB_GND
DISP_RX
(Page 40)
DISP_TX RE_IN0 DP_FLS_W DISPLAY_CONTROL FL-VDD1(3.3V) LED+10V GND
MEX-BT5100
39
39
MEX-BT5100
5-19. SCHEMATIC DIAGRAM - KEY Board (1/2) -
• See page 43 for Waveforms.
• See page 45 for IC Block Diagrams.
• See page 49 for IC Pin Function Description.
(1/2)
A1 A2 A3 R719 100k
A4 A5
(Page 41)
BT_LED1
DISP_RX DISP_TX RE_IN0 DP_FLS_W
D703
MAZ8068GMLS0
BUS_RX
D702
MAZ8068GMLS0
BUS_TX
D719
MAZ8068GMLS0
D704
MAZ8068GMLS0
DISPLAY_CONTROL
C730
1
C703
0.1
R714 22
R715 22
R717 22
100k
R716 22
0.1
USB_GND
R724
D709 MAZ8068GMLS0
D707 MAZ8068GMLS0
NC
IC703 RS-470
C704
CN701 20P
RECEIVER
R723 100
R731 100
S11
REMOTE CONTROL
R718 R721 100
S13
0
R704 100k
CLK
R751 680 C711 0.1
CLK
BT_LED3
VOL
BT_LED2
ENC701(1/2)
R761 1k
MAS_IF
FL-VDD1(3.3V)
FL_ CKO1 FL_ SO1
NC
FL_SO3
NC
FL_CKI3
SIRCS
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
BVSS
BVDD
GCP_EDGE2 GCP_TGR2
NC NC
GCP2
FL-F2(-,+1.0V)
NC
GCP_TGR3
RE_IN1
NC
GCP3
NC
NC
D701 MAZ8068GMLS0
RESET(DISPLAY) D705 RB751V Q701 RT1N441C INVERTER
NC
NC
FL_CKI2
NC
FL_SO2 FRONT PANEL CONTROLLER
NC
IC704 μPD703263GC -111-8EA-A
NC
100
NC
NC
NC
NC
GCP1
NC
GCP_TGR1
NC
GCP_EDGE1
NC
EDGE_TGR1
CLK
R710 22
S12
R709 22
BK
R708 22
LAT
NC
C710 0.1
C722 0.01
R707 0
R706 22
BK R705
22
BUS_RX
BUS _TX
NC
NC
NC
BUS_RX
NC
B
NC
CTR FLMD
REGC
R767 10k
EVSS
NC
VSS
C724 1000p
NC
VDD
R793 22
VCC
A GND
C723 0.1
EVDD
NC
OE R722 100
NC
NC
FLMD0
BUS SWITCH IC701 SN74CB3T1G125DCK
NC
KEY2
D715 MAZ8068GMLS0
R726 100k
LATCH
KEY0
NC
R004
KEY_IN2
R711 22
BK NC
KEY1
AVREF1
100
NC
100
R749
AVSS
R003 10k
TUBE
R746
NC
KEY_IN1
AVREF0
R745 10k
FL701 FLUORESCENT INDICATOR
NC
BK R712 22
NC
NC
KEY_IN0
SH_IF
KEY_0(KEY_ACK)
D713 MAZ8068GMLS0
GND
GND
NC
NC
GND
R713 22
C712 0.1
GND
0.1
RESET#
C702
X2
FL-VDD2(+55V)
VCC
FL-VSS
BK
EDGE_TGR2
ENTER
X1
(Page 39)
ENC_SEL
C721 1000p
FL-F1(+,+4.3)
BT_LED1
FLMD1
KEY0-SW
DOOR_SW
BT_LED3
FLS_ WRT
D718 MAZ8180GMLS0
GND
BT_LED2
R795 0
LED+10V
R701 22k
S13 S12 S11
LAT
5MHz X701
R703 22
BUS_TX
100 R773
C718 0.1
MAS_IF
10p
10p
C714
C715
R766
1k
0.1 C713
C732 0.1
0
C731 0.1
R727
CLK
OR GATE IC705 TC7WZ32FK
C717 0.1
BK
C709 0.1
R742 100k
R720 100k C729 0.1
C728 0.1
MEX-BT5100
C725 0.1
40
40
OUT
IN
GND
NC
VOLTAGE DETECT IC702 XC61CN2802NR
MEX-BT5100
5-20. SCHEMATIC DIAGRAM - KEY Board (2/2) -
(2/2) A1 A2 A3
BT_LED2
BT_LED3
A5
(Page 40)
BT_LED1
A4 LED801-803 (BLUETOOTH INDICATOR)
R811 1.5k
R812 1.5k
R801 1.5k
R802 1.5k
R803 1.5k
LED801 SO-194S-WM
LED806 SO-194S-WM
R804 1.5k
R805 1.5k
LED802 SO-194S-WM
R807 2.2k
R806 1.5k
LED803 SO-194S-WM
4
R828 0
R827 0
LED807 SO-194S-WM
LED805 SO-194S-WM
MENU
SOURCE
Q803 RT1N441C LED DRIVE
5
R813 1.5k
R814 1.5k
R815 1.5k
LED808 SO-194S-WM
LED810 SO-194S-WM
SHUF
AF/TA
2
R818 1.5k
LED812 SO-194S-WM
R819 4.7k
LED814 SO-194S-WM
Bluetooth
R821 1.5k
R820 4.7k
R822 1.5k
R823 1.5k
R824 1.5k
REP 1
PTY
OFF
LED815 SO-194S-WM
LED813 SO-194S-WM
LED817 SO-194S-WM
LED819 SO-194S-WM
PAUSE 6
D706 MAZ8068GMLS0
KEY_IN2
KEY_IN0
KEY_IN1
LED816-819 PUSH LIST VOL
S701 OFF
R763 680
R757 680
S702 R764 680
R762 680
SOURCE
S709 R771 1k
PAUSE
R775 1.5k
BBE MP
ENC701(2/2)
S703
PUSH LIST
CALL
(JOG) S704
R768 680
MENU
6 S710
S705 R770 680
Bluetooth
5 S711 R779 1.5k
4
S706
PTY DSPL (AEP,UK)
R781 2.2k
S713 R785 3.3k
DSPL
SHUF
S707
R774 680
(US,CND,E)
S712 3
AF/TA
SCRL
(AEP,UK)
(US,CND,E)
R778 1k
S708 R780 1.5k
MODE
2 S714 R788 4.7k
MEX-BT5100
(US,CND,E) LED821 SO-194S-WM
MODE
CALL
DSPL
DSPL (AEP,UK)
D710 MAZ8068GMLS0
R769 680
R825 1.5k
LED820 SO-194S-WM
LED818 SO-194S-WM
LED816 SO-194S-WM
(US,CND,E)
LED811 SO-194S-WM
3
R817 1.5k
SCRL
(AEP,UK) LED809 SO-194S-WM
R816 1.5k
REP 1
41
41
R809 2.2k
LED804 SO-194S-WM
R829 0 Q802 RT1N441C LED DRIVE
Q801 RT1N441C LED DRIVE
BBE MP
R808 2.2k
R826 1.5k
R810 2.2k
MEX-BT5100 5-21. PRINTED WIRING BOARD - KEY Board -
1
• See page 26 for Circuit Boards Location.
2
3
•
: Uses unleaded solder.
4
5
6
7
8
9
10
KEY BOARD (COMPONENT SIDE)
A LED815, S708
LED815 A
K
MODE S708 LED817 K A
E
LED812, S705 Bluetooth
LED805, S702
S702
PUSH LIST VOL
LED818 K
LED801 – 803 (BLUETOOTH INDICATOR)
LED804, S704
LED801 K A
MENU
K
LED804 A K
S704
A
LED805 A K
Q801
K LED812
LED816
LED816 – 819
B
R827 A
S705
SOURCE
A
A K LED802 A
R768
K LED803
S703 LED813, S703 K
CALL
S701 – 714 LED814 A K
1
C711
R757
LED811 A K
LED810 A K
3
LED808 A K
S707
4
LED809 A K
S714
S713
S712
LED810, S707 AF/TA
KEY BOARD (CONDUCTOR SIDE)
LED808, S713
LED809, S712
LED806, S711
LED807, S710
LED821, S709
SHUF 2
3
4
BBE MP 5
PAUSE 6
SCRL
R708
F
R767 1
ENC702 PUSH LIST VOL
26 R705
C714
D701 D702 D703 D704 D705 D706 D707
Location E-9 F-9 F-10 F-9 E-8 E-3 F-2
MEX-BT5100
Ref. No. D709 D710 D713 D715 D718 D719
Location E-3 F-2 E-10 F-5 F-9 F-9
Ref. No. IC701 IC702 IC703 IC704 IC705
Location E-5 F-7 C-5 E-5 E-7
LED801 B-10
Ref. No. LED802 LED803 LED804 LED805 LED806 LED807 LED808
Location B-10 B-10 B-4 B-1 C-8 C-8 C-6
Ref. No. LED809 LED810 LED811 LED812 LED813 LED814 LED815
Location C-7 C-5 C-6 B-4 C-4 C-3 A-3
Ref. No. LED816 LED817 LED818 LED819 LED820 LED821
C718 X701
3
Ref. No. Q701 Q801 Q802 Q803
B-3 B-3 B-2 C-3 C-10 C-9
42
R826
R829 Q802
IC702
4
3
C729
Location E-4 B-10 F-10 E-10
42
C725 C728
R795
C703
R828 21
R720
1 2
1-869-285-
C730
D718 21
Location
CN701
R701
R766 C715 R773
• Semiconductor Location Ref. No.
(Page 38)
FL701 FLUORESCENT INDICATOR TUBE
4
SUB BOARD CN902
R703
25
R727
1
Q803
D705
5
D703
1
R706
8
C722
C724
C731
IC705
R709
D702
R770
R821
9
R822
8
R780
3
D713
R710
R749 R004 100
R003
R817
D710
R801
D701
C702
C709
D707
R745
R804 R806 R802
R714
R742
R818
R746
R771 R775
D
IC704
C713
R764
R721
4
C717
R807 R808
4
5
3
C712
R763
7
1
R779
R812
R711
C710
R722
DSPL
50
IC701
5
R811
R712 R713
C723
D706
ENC702 ROTARY ENCODER
Q701
R715
51
76 C721
R726
D709
75
R781
R803 R805
R717 R716
R724
R707
R719 R704
R723
D715 C732
R809
R810
R769
21 (21)
LED820, S706 PTY DSPL
R825
R813 R814
R778
R815 R816 R819
R820
2
R731
R823
S706
(AEP, UK) (US, CND, E)
R774 R718 C704
R824
A K LED820
S709
REP 1
R785
6
S710
(AEP, UK) (US, CND, E)
D
R762
S711
LED811, S714
OFF
E
LED821 A K
1-869-285-
LED814, S701
1
LED807 A K
A K LED806
D704
S701
IC703
2
R751
D719
C
LED819 A
K
R761
A
A K LED813
R788
LED801 – 821
R793 34
37
39
(21)
MEX-BT5100
• Waveforms – SERVO Board –
– IT Board –
IC2 (FEI)
Approx. 100 mVp-p 50 mV/DIV, 5 ms/DIV
IC3 JB (X1)
RB
1.1 Vp-p
1.5 Vp-p
83.3 ns
68 ns
500 mV/DIV, 20 ns/DIV
IC2 (TEI)
IC506 RE (XTAL1)
1 V/DIV, 50 ns/DIV
RT
IC511 [ (EXTAL)
Approx. 400 mVp-p
1.6 Vp-p 80 ns
200 mV/DIV, 5 ms/DIV
1 V/DIV, 50 ns/DIV
IC2 XE (XI)
600 mVp-p 59.1 ns 200 mV/DIV, 20 ns/DIV
IC2 JB (RFI)
Approx. 1 Vp-p 500 mV/DIV, 0.5 μs/DIV
IC2 PG (FNI2), PH (FNI1)
1.5 Vp-p 500 mV/DIV, 0.5 μs/DIV
IC2 PI (FPI2), PK (FPI1)
1.5 Vp-p 500 mV/DIV, 0.5 μs/DIV
43
MEX-BT5100
– MAIN Board –
XB
– KEY Board –
IC401 R (XTO)
FB
IC704 RE (X2)
1.9 Vp-p 115 ns 500 mV/DIV, 50 ns/DIV
XT
IC501 VL (XOUT)
840 mVp-p 30.4 μs 500 mV/DIV, 20 μs/DIV
XE
IC501 J (OSCOUT)
960 mVp-p 54 ns 500 mV/DIV, 20 ns/DIV
44
2.3 Vp-p 200 ns 1 V/DIV, 100 ns/DIV
MEX-BT5100
• IC Block Diagrams – SERVO Board – IC1 BA5968FP-E2 28 REV
FWD 1 FWD REV
LDCTL 2
27 OPIN4+
OUTR OUTF
NC 3
26 OPIN4–
OPOUT1 4
25 OPOUT4
NC 5
24 OPIN3+
NC 6 23 OPIN3– OPOUT2 7
POWVCC 8 VOL– 9
22 OPOUT3
VCC
21 MUTE 20 VOL+ 19 GND
MUTE
VOL+ 10
18 VOL3–
VOL2– 11 LEVEL SHIFT
LEVEL SHIFT
VOL2+ 12
17 VOL3+
16 VOL4–
VO1– 13 LEVEL SHIFT
VO1+ 14
LEVEL SHIFT
15 VOL4+
IC6 BH15LB1WG VIN 1 VOLTAGE REFERENCE
GND 2
– +
THERMAL PROTECTION
5
VOUT
4
N.C.
OVER CURRENT PROTECTION CONTROL BLOCK
STBY 3
– IT Board – IC503 XC6219B332MR VCC 5 VOUT
VIN 1 + –
CURRENT LIMIT
VOLTAGE REFERENCE
VSS 2 VCC
CE 3
ON/OFF CONTROL
EACH CIRCUIT
4 NC
45
MEX-BT5100
D4 D3 D2 D1 D0 TXRDYA#
VCC RIA# CDA# DSRA# CTSA# NC
IC506 XR16L2550IM-F
48 47 46 45 44 43
42 41 40 39 38 37 36 RESET
D5 D6 D7 RXB RXA TXRDYB# TXA TXB OP2B# CSA# CSB# NC
TRANSMIT SHIFT RESISTER (THR/FIFO)
1 2 3 4 5 6 7 8 9 10 11 12
RECEIVER SHIFT RESISTER (RHR/FIFO) 8-bit DATA BUS INTERFACE
35 DTRB# 34 DTRA#
MODEM GENERAL PURPOSE CONTROL LOGIC
33 RTSA#
32 OP2A#
CRYSTAL OSC/BUFFER
17
18 19
20 21 22
23 24
GND
DSRB# RIB# RTSB#
CTSB# NC
XTAL1 XTAL2 IOW# CDB#
13 14 15 16
RXRDYB# IOR#
31 30 29 28 27 26 25
IC513 S-1170B19UC-OTETFG ON/OFF 1
IC517 S-80930CLNB-G60T2G – +
ON/OFF CIRCUIT
5
VOUT
VSS 1 VREF + –
REFERENCE VOLTAGE CIRCUIT VDD 2 THERMAL SHUTDOWN CIRCUIT OVERCURRENT PROTECTOR VSS 2 NC 3
46
RXRDYA# INTA INTB A0 A1 A2 NC
4
VIN
DELAY CIRCUIT 4
OUT
3
CD
MEX-BT5100
– MAIN Board – IC101 BD9300FV-FE2
IC102 BA8271F-E2
RT 2
OSC
VREF
BUS ON
LINK OFF
CLK OUT
DATA OUT
DATA IN
RESET
DTC 1
13 1/2VREF
VCC
14 NON + –
12 INV 11 VREF
14
13
12
11
10
9
8
10 CTL RESET SWITCH
1
2
3
4
5
6
7
BUS CLK
VREF
BUS DATA
BUS RESET
9 SCP 8 VCC
GND
TIMER LATCH
BUS ON IN
OUT 5 N.C. 6 GND 7
BUS ON OUT
+ – –
CT 3 FB 4
IC301 TDA7419TR
AUOUTR/ 1 AC2OUTR ACINR/ 2 FILOR ACINL/ 3 FILOL
MIX/ 28 OUTSW/ OUTRR2
ACOUTL/ 4 AC2OUTL HPF AC2INL/ 5 SE3L
HPF
SUPPLY
27
VREF OUTF
AC2INR/ 6 SE3R 26 SAOUT 25 SACLK 24 VDD
SPECTRUM ANALYZER
BASS
MIDDLE
TREBLE
SOFTSTEP VOLUME
SOFT MUTE
LOUDNESS
SOFTSTEP MONO FADER
CREF 14
21 MUTE 20 OUTLF
SOFTSTEP MONO FADER
19 OUTLR
SOFTSTEP MONO FADER
18 OUTRR
SOFTSTEP MONO FADER
SUBWOOFER LPF
23 SDA 22 SCL
DIGITAL CONTROL
MIX
IN GAIN
7 8 9 10 11 12 13
IN GAIN AUTO ZERO
SE2L SE2R SE1L SE1R DIFFL DIFFG DIFFR
INPUT MULTIPLEXER
I2C BUS
SOFTSTEP MONO FADER SOFTSTEP MONO FADER
MIX
17 OUTRF
16
OUTSW/ OUTLR2
15 GND
47
MEX-BT5100
IC302 NJM2750M-TE2
IC401 TDA7333013TR
IN1A 1
VDDA REF3 REF2 REF1 VSS
16 GND
CNT1 2 IN2A 3
15 OUTA
CNT2 4
1 2 3 4 5
16 15 14 13 12 11
SIGMA DELTA CONVERTER
14 V+ TM 6 VDDD 7 RESETN 8
13 IN3A LOGIC
TEST LOGIC & PIN MIX'S TESTREG SPL SCK SDAIN SDAOUT
12 VREF
BIAS IN1B 6 IN2B 7
11 OUTB
IN4B 8
SINC4 FILTER
10 NC
SINC4 REG
I2C/SPI INTERFACE
9 IN3B
RAM BUFFER & CONTROL LOGIC
BANDPASS FILTER
INTERPOLATOR
RDS DEMODULATOR & SYNCHRONISATION
MPX
IC601 BD9851EFV-E2 SEL1 1
20 GND
RT 2 CT 3
NON2 4 INV2 5 FB2 6
DTC2 PVCC2 OUT2 PGND
BOTH CH ON/OFF
+ – –
OSC
+ + –
+ –
VREF (2.5V)
+ –
13 DTC1 12 PVCC1 11 OUT1
+ – –
IC602 MM1613DNLE
– KEY Board – IC701 SN74CBT1G125DCK 5 VIN
CONT 1
BIAS
REFERENCE
DRIVER
CURRENT LIMITTER
THERMAL SHUTDOWN GND 2 NOISE 3
48
17 VREF
16 INV1 15 FB1 14 SCP
TIMER LATCH
7 8 9 10
19 STB 18 VCC
4 VO
OE 1
5
VCC
A 2 GND 3
4
B
OSCILLATOR
IN4A 5
MPX INTN CSN SA_DATAOUT SDA_DATAIN SCL_CLK
10 XTO 9 XTI
MEX-BT5100
• IC Pin Function Description SERVO BOARD IC2 TC94A70FG-002 (RF AMP, DIGITAL SERVO, DIGITAL SIGNAL PROCESSOR) Pin No.
Pin Name
I/O
1
AVSS3
-
Ground terminal
Description
2
RFZI
I
RF ripple zero crossing signal input terminal
3
RFRP
O
RF ripple signal output terminal
4
SBAD/RFDC/ETE
O
5
FEI
I
Subbeam addition signal output/RF peak detecting phase signal output for hologram selection terminal Not used Focus error signal input terminal Not used
6
TEI
I
Tracking error signal input terminal
7
TEZI
I
Tracking error signal zero crossing input terminal
8
AVDD3
-
Power supply terminal (+3.3 V)
9
FOO
O
Focus servo equalizer signal output terminal
10
TRO
O
Tracking servo equalizer signal output terminal
11
VREF
I
Reference voltage (+1.65V) input terminal
12
FMO
O
Feeding servo equalizer signal output terminal
13
DMO
O
Disc servo equalizer signal output terminal
14
VSSP3
-
Ground terminal
15
VCOI
I
DSP VCO control voltage input terminal
16
VDDP3
-
Power supply terminal (+3.3 V)
17
VDD1-1
-
Power supply terminal (+1.5 V)
18
VSS1-1
-
Ground terminal
19
FGIN
I
FG signal input terminal for CAV
-
Not used
-
Ground terminal
20, 21 22
IOO (/HSO), IOI (/UHSO) XVSS3
Not used
23
XI
I
System clock input terminal (16.9344 MHz)
24
XO
O
System clock output terminal (16.9344 MHz)
25
XVDD3
-
Power supply terminal (+3.3 V)
26
DVSS3-1
-
Ground terminal
27
RO
O
R channel data (positive) output terminal
28
DVDD3
-
Power supply terminal (+3.3 V)
29
DVR
I
Reference voltage (+1.65V) input terminal
30
LO
O
L channel data (positive) output terminal
31
DVSS3-2
-
Ground terminal
32
VDDT3-1
-
Power supply terminal (+3.3 V)
33
VSS1-2
-
Ground terminal
34
VDD1-2
-
Power supply terminal (+1.5 V)
35
VDDM1
-
Power supply terminal (+1.5 V)
36
MSTBY
I
S-RAM standby mode control signal input from the CD system control
37
/RST
I
Reset signal input from the CD system control
38 to 41
BUS0 to BUS3
I/O
42
BUCK (CLK)
I
Bus clock signal input from the CD system control
43
/CCE
I
Chip enable signal input from the CD system control
44
TEST
I
Setting terminal for test mode
45
IRQ
I
Interrupt request signal input terminal
-
Not used
Bus data input/output with the CD system control
Normally fixed at "L" Not used
48
AOUT3 (PO4), AOUT2 (PO5) PIO0
O
Request signal output to the CD system control
49, 50
PIO1, PIO2
-
Not used
46, 47
51
PIO3
I
Muting on/off control signal input from the CD system control
52
VSS1-3
-
Ground terminal
53
VDDT3-2
-
Power supply terminal (+3.3 V)
54
SBSY
-
Not used
55
SBOK/FOK
-
Not used
56
IPF
-
Not used
57
SFSY/LOCK
-
Not used
58
ZDET
O
Zero detection signal output to the CD system control
"L": mute
49
MEX-BT5100
Pin No.
Pin Name
I/O
59
GPIN
-
60
MS
I
61
DOUT (PO6)
O
Microcomputer I/F mode selection signal input terminal "L": serial 3-line type, "H": parallel 6-line type Digital output terminal Not used
62
AOUT (PO7)
O
Audio data output terminal
63
BCK (PO8)
O
Bit clock signal (2.8224 MHz) output terminal for audio data output
64
LRCK (PO9)
O
L/R sampling clock signal (44.1 kHz) output terminal for audio data output
65
AIN (PI4)
I
Data input terminal for internal D/A converter
66
BCKI (PI5)
I
Bit clock signal (2.8224 MHz) input terminal for internal D/A converter
67
LRCKI (PI6)
I
L/R sampling clock signal (44.1 kHz) input terminal for internal D/A converter
68
VDD1-3
-
Power supply terminal (+1.5 V) Ground terminal
50
Description Not used
Not used Not used Not used
Not used Not used Not used
69
VSS1-4
-
70
AWRC
-
Not used
71
PVDD3
-
Power supply terminal (+3.3 V)
72
PDO
O
Phase error margin signal between EFM signal and PLCK signal output terminal
73
TMAXS
O
TMAX detection result output terminal
74
TMAX
O
TMAX detection result output terminal Inverted signal input from the operation amplifier for PLL loop filter
Not used
75
LPFN
I
76
LPFO
O
Signal output from the operation amplifier for PLL loop filter
77
PVREF
I
Reference voltage (+1.65V) input terminal
78
VCOF
O
Terminal for VCO filter
79
PVSS3
-
Ground terminal
80
SLCO
O
EFM slice level output terminal
81
RFI
I
RF signal input terminal
82
RFRPI
I
RF ripple signal input terminal
83
RFEQO
O
EFM slice level output terminal
84
VRO
O
Reference voltage (+1.65V) output terminal
85
RESIN
O
Resistance connection terminal for standard voltage generation
86
VMDIR
O
Reference voltage (+1.65V) output terminal for APC circuit
87
TESTR
O
Low-pass filter terminal for RFEQO offset correction
88
AGCI
I
RF signal amplitude adjustment amplification input terminal
89
RFO
O
RF signal generation amplification output terminal
90
RVDD3
-
Power supply terminal (+3.3 V)
91
LDO
O
Laser diode amplification output terminal
92
MDI
I
Monitor photo diode amplification input terminal
93
RVSS3
-
Ground terminal
94
FNI2
I
Main beam input terminal (Connect with pin diode C)
95
FNI1
I
Main beam input terminal (Connect with pin diode A)
96
FPI2
I
Main beam input terminal (Connect with pin diode D)
97
FPI1
I
Main beam input terminal (Connect with pin diode B)
98
TPI
I
Sub beam amplification input terminal (Connect with pin diode F)
99
TNPC
-
Not used
100
TNI
I
Sub beam amplification input terminal (Connect with pin diode E)
MEX-BT5100
SERVO BOARD IC3 MB90486BPMC-G-177E1 (CD SYSTEM CONTROL) Pin No.
Pin Name
I/O
Description
1
CDON_1500MV
O
Servo 1.5 V power supply control signal output terminal
2 to 5
NC
-
Not used
6
DRVON
O
Motor drive muting on/off control signal output terminal
7, 8
CD_BUS0, CD_BUS1
I/O
Bus data input/output with the RF amplifier
9
VSS
-
10, 11
CD_BUS2, CD_BUS3
I/O
Ground terminal Bus data input/output with the RF amplifier
12
CD_BUCK
O
Bus clock signal output to the RF amplifier
13
CD_XCCE
O
Chip enable signal output to the RF amplifier
14
CD_XRST
O
Reset signal output to the RF amplifier
15
CD_ZDET
I
Zero detection signal input from the RF amplifier
16 to 20
NC
-
Not used Power supply terminal (+3.3 V)
21
VCC
-
22
DAC_ZDETL
I
Zero data detection signal input terminal (L-ch)
Not used
23
DAC_ZDETR
I
Zero data detection signal input terminal (R-ch)
Not used
24
NC
-
Not used
25
RXD
I
Serial data input from the SONY bus interface IC
26
TXD
O
Serial data output to the SONY bus interface IC
27
DEC_SSTBY
O
S-RAM standby mode control signal output to the RF amplifier
28, 29
NC
-
Not used
30
DEC_INT
I
Request signal input from the RF amplifier
31, 32
NC
-
Not used
33
AVCC
-
Power supply terminal (+3.3 V) for A/D converter
34
AVRH
-
External reference voltage for A/D converter
35
AVSS
-
Ground terminal
36
NC
-
Not used
37
DEC_XMUTE
O
Muting on/off control signal output to the RF amplifier
38, 39
NC
-
Not used
40
VSS
-
Ground terminal
41
NC
-
Not used
42
MEC_LIMIT
I
Sled limit in detection switch signal input terminal
43
MEC_LOAD
O
Loading motor signal output to the coil/motor drive (Load direction)
44
MEC_EJECT
O
Loading motor signal output to the coil/motor drive (Eject direction)
45
MEC_INSW
I
Pack-in detection signal input terminal
46
MEC_DSW
I
Chucking end detection switch signal input terminal
47 to 49
MD0 to MD2
I
CPU operation mode setting terminal
50
BUS_ON
I
SONY bus on/off control signal input terminal
51
BU_IN
I
Back up power supply detection signal input terminal
52
NC
I
Not used
53
MEC_SELFSW
I
Disc insert detection switch signal input terminal
54, 55
NC
-
Not used
"L": mute
"L": bus on "L" is input at low voltage
"L": disc in interruption
56
UNISI
I
Serial data input from the SONY bus interface IC
57
UNISO
O
Serial data output to the SONY bus interface IC
58
UNICKI
I
Serial data transfer clock signal input from the system controller
59
LINKOFF
O
Line off signal output terminal
60
A_ATT
O
Muting on/off control signal output terminal
61
XFLASH & EJECT_OK
I
CD eject OK signal input from the system controller
62
OPEN_REQ
O
Front panel open/close request signal output terminal
63
MECON
O
Mechanism deck power supply on/off control signal output terminal
64
CDON
O
CD servo power supply detection output terminal
65
XUART
I
Sony-bus/MC-bus change signal input terminal
66
ZMUTE
O
Muting on/off control signal output to the system controller
67
MECON_CHK
I
CD mecha +6V power rising detection signal input
68
CDON_CHK
I
CD servo +3.3V power rising detection signal input terminal
69 to 74
NC
-
Not used
75
RSTX
I
System reset signal input terminal
Not used
Not used
51
MEX-BT5100
Pin No.
Pin Name
I/O
76
NC
-
Not used
Description
77
X1A
O
Sub system clock output terminal
78
X0A
I
Sub system clock input terminal
Not used
79
VSS
-
Ground terminal Main system clock input terminal (12 MHz)
Not used
80
X0
I
81
X1
O
Main system clock output terminal (12 MHz)
82
VCC
-
Power supply terminal (+3.3 V)
83
XWD
I
Not used
84
XINIT3
I
Not used
85
NC
-
Not used
86
XSJIG
I
Not used
87 to 89
XINIT0 to 2
I
Not used
90 to 96
NC
-
Not used
97
XDES
I
Destination setting terminal
98
XLINE
I
Not used
99, 100
NC
-
Not used
52
MEX-BT5100
IT BOARD IC511 HD6417727F100CV (BLUETOOTH CONTROLLER) Pin No.
Pin Name
I/O
1
VCC-RTC
-
Power supply terminal (+1.9V)
2
XTAL2
I
System clock input terminal for internal real time clock
3
EXTAL2
O
System clock output terminal for internal real time clock
4
VSS-RTC
-
Ground terminal
5, 6
MD1, MD2
I
Setting terminal for the clock mode
7
NMI
I
Non-maskable interrupt input terminal
Fixed at "H" in this set
IRQ0
I
Interrupt request signal input terminal
Not used
I
Interrupt request signal input from the data bus interface
8
Description
11, 12
UART_INTA, UART_ INTB IRQ3, IRQ4
I
Interrupt request signal input terminal
13
VEPWC
O
Not used
9, 10
Not used Not used
Not used
14
VCPWC
O
Not used
15
MD5
I
Setting terminal for the endian
16
BREQ
I
Bus request signal input terminal
17
BACK
O
Bus acknowledge signal output terminal
18
VSSQ
-
Ground terminal
19
SD_CLK
O
Serial data transfer clock signal output to the data bus interface
20
VCCQ
-
Power supply terminal (+3.3V)
21 to 28
D31 to D24
I/O
29
VSSQ
-
30
D23
I/O
31
VCCQ
-
32 to 34
D22to D20
I/O
35
VSS
-
36
D19
I/O
37
VCC
-
38 to 40
D18 to D16
I/O
41
D15
I/O
42
VSSQ
-
43
D14
I/O
44
VCCQ
-
45 to 50
D13 to D8
I/O
51, 52
D7, D6
I/O
53
VSSQ
-
54
D5
I/O
55
VCCQ
-
56 to 60
D4 to D0
I/O
Two-way data bus with the SD-RAM, flash ROM and data bus interface
61
A0
O
Address signal output to the data bus interface
Not used Not used
Two-way data bus with the SD-RAM Ground terminal Two-way data bus with the SD-RAM Power supply terminal (+3.3V) Two-way data bus with the SD-RAM Ground terminal Two-way data bus with the SD-RAM Power supply terminal (+1.9V) Two-way data bus with the SD-RAM Two-way data bus with the SD-RAM and flash ROM Ground terminal Two-way data bus with the SD-RAM and flash ROM Power supply terminal (+3.3V) Two-way data bus with the SD-RAM and flash ROM Two-way data bus with the SD-RAM, flash ROM and data bus interface Ground terminal Two-way data bus with the SD-RAM, flash ROM and data bus interface Power supply terminal (+3.3V)
62
A1
O
Address signal output to the flash ROM and data bus interface
63
A2
O
Address signal output to the SD-RAM, flash ROM and data bus interface
64
VSSQ
-
Ground terminal
65
A3
O
Address signal output to the SD-RAM and flash ROM
66
VCCQ
-
Power supply terminal (+3.3V)
67 to 74
A4 to A11
O
Address signal output to the SD-RAM and flash ROM
75
VSSQ
-
Ground terminal
76
A12
O
Address signal output to the SD-RAM and flash ROM
77
VCCQ
-
Power supply terminal (+3.3V)
78, 79
A13, A14
O
Address signal output to the SD-RAM and flash ROM
80 to 85
A15 to A20
O
Address signal output to the flash ROM
86
VSSQ
-
Ground terminal
87
A21
O
Address signal output to the flash ROM
88
VCCQ
-
Power supply terminal (+3.3V)
89, 90
A22, A23
O
Address signal output terminal
91
VSS
-
Ground terminal
92
A24
O
Address signal output terminal
Not used Not used
53
MEX-BT5100
Pin No.
Pin Name
I/O
93
VCC
-
Power supply terminal (+1.9V)
Description
94
A25
O
Address signal output terminal
95
PTK4
-
Not used
96
RD
O
Read strobe signal output to the flash ROM and data bus interface
Not used
97
DQMLL
O
Write mask signal output to the SD-RAM and data bus interface
98
DQMLU
O
Write mask signal output to the SD-RAM and flash ROM
99
DQMUL
O
Write mask signal output to the SD-RAM
100
VSSQ
-
Ground terminal
101
DQMUU
O
Write mask signal output to the SD-RAM
102
VCCQ
-
Power supply terminal (+3.3V)
103
RD/WR
O
Read/write signal output to the SD-RAM
104
PTE7
-
Not used
105
NOR_CS
O
Chip select signal output to the flash ROM
106
CS2
O
Chip select signal output terminal
107
SD_CS
O
Chip select signal output to the SD-RAM
108
CSA
O
Chip select signal output to the data bus interface
109
PTK3
-
Not used
110
CSB
O
Chip select signal output to the data bus interface
111
EVOL_CLK
O
Serial data transfer clock signal output to the audio select
112
MAS_RST
O
System reset signal output terminal
113
SELF_PRCT
O
Power on/off control signal output terminal for the bluetooth section
114
DISP_RST
O
System reset signal output to the front panel controller
115
VSSQ
-
Ground terminal
116
TXDPLS
-
Not used
117
VCCQ
-
Power supply terminal (+3.3V)
118
MAS_PW
I
119
DOOR_SW
I
Not used
Not used "L": reset
120
ATT
I
State notification signal input from the system controller "H": state that can be communicated Shutter of front panel open/close detection input terminal "L": Shutter is open Muting on/off control signal input terminal
121
TXDMNS
-
Not used
122
USB1D_SUSPEND
-
Not used
123
USB1_OVR_CRNT
I
Over current detection signal input terminal
Not used
124
USB2_OVR_CRNT
I
Over current detection signal input terminal
Not used
125
USB1DTXEL
-
Not used
126
USB1PWREN
O
Power on/off control signal output terminal
Not used
127
USB2PWREN
O
Power on/off control signal output terminal
Not used
128
SD_CKE
O
Clock enable signal output to the SD-RAM
129
SD_RAS
O
Row address strobe signal output to the SD-RAM
130
PTJ1
-
Not used
131
SD_CAS
O
Column address strobe signal output to the SD-RAM
132
VSSQ
-
Ground terminal
133
PTJ3
-
Not used
134
VCCQ
-
Power supply terminal (+3.3V)
135, 136
PTJ4, PTJ5
-
Not used
137
VSS
-
Ground terminal
138
SH_PW
O
54
Can not disc eject when input "H"
139
VCC
-
State notification signal output to the system controller "H": state that can be communicated Power supply terminal (+1.9V)
140
DISP_PW
O
Communication interface signal output to the front panel controller
141
MAS_FLSW
O
Flash writing mode detection signal output terminal
Not used
142
DISP_FLSW
O
Flash writing mode detection signal output terminal
Not used
143
TDO
O
Data output terminal
144
DRAK0
-
Not used
Not used
145
DACK
-
Not used
146
WAIT
I
Hardware wait request signal input terminal
147
RESETM
I
Manual reset request signal input terminal
Not used Not used
MEX-BT5100
Pin No.
Pin Name
I/O
148
ADTRG
-
Not used
Description
149
PTG0
-
Not used
150
ASEMD0
I
ASE mode setting terminal
151
ASEBRKAK
O
ASE break acknowledge signal output terminal
152
PTG4
-
Not used
153
AUDATA3
-
Not used
154
AUDATA2
-
Not used
155
VSS
-
Ground terminal
156
AUDATA1
-
Not used
157
VCC
-
Power supply terminal (+1.9V)
158
AUDATA0
-
Not used
159
VSSQ
-
Ground terminal
Not used
160
TRST
I
Reset signal input terminal
161
VCCQ
-
Power supply terminal (+3.3V)
162
TMS
I
Test mode control input terminal
163
TDI
I
Data input terminal
164
TCK
I
Clock input terminal
165
RESERVED
-
Not used
Not used
Not used Not used
Not used Not used
166
TXRDYB
I
Ready signal input from the data bus interface
167
RXRDYB
I
Ready signal input from the data bus interface
168
MODEL_SW
I
The bluetooth module enable/diable detection input terminal fixed at "H" in this set
169
MD0
I
Setting terminal for the clock mode
170
VCC-PLL1
-
Power supply terminal (+1.9V)
171
CAP1
-
Not used
172, 173
VSS
-
Ground terminal
174
CAP2
-
Not used
175
VCC-PLL2
-
Power supply terminal (+1.9V)
176
SH_FLSW
I
Flash writing mode detection signal input terminal
177
VSS
-
Ground terminal
178
VCC
-
Power supply terminal (+1.9V)
179
XTAL
I
System clock input terminal (12.5 MHz)
180
EXTAL
O
System clock output terminal 12.5 MHz)
181
TXRDYA
I
Ready signal input from the data bus interface
182
PINT9
-
Not used
183
PINT
-
Not used
184
PTM0
-
Not used
185
BT_RST
O
System reset signal output to the bluetooth module
186
MISO
O
Serial data output to the bluetooth module
187
PTH7
-
Not used
188
VSSQ
-
Ground terminal
189
CKIO
-
Not used Power supply terminal (+3.3V)
190
VCCQ
-
191
SH_UART_TX
O
Serial data output terminal
192
SCK0
-
Not used
193
TXD_SIO
-
Not used
194
SIOMCLK
-
Not used
195
MAS_TX
O
Serial data output to the system controller
196
SCK_SIO
-
Not used
197
SIOFSYNC
-
Not used
198
SH_UART_RX
I
Serial data input terminal
199
RXD_SIO
-
Not used
200
VSS
-
Ground terminal
201
MAS_RX
I
Serial data input from the system controller
202
VCC
-
Power supply terminal (+1.9V)
Not used
Not used
Not used
203
SCPT7
-
Not used
204
SPICLK
O
Serial data transfer clock signal output to the bluetooth module
55
MEX-BT5100
Pin No.
Pin Name
I/O
205
SPICS
O
Description Chip select signal output to the bluetooth module
206
MOSI
I
Serial data input from the bluetooth module
207
VSSQ
-
Ground terminal
208
LCD8
-
Not used
209
VCCQ
-
Power supply terminal (+3.3V)
210 to 217
LCD7 to LCD0
-
Not used
218
RXRDYA
I
Ready signal input from the data bus interface
219
LCLK
I
System clock input terminal
220
RESETP
I
System reset signal input from the system controller Not used
Not used
221
CA
-
222, 223
MD3, MD4
I
Setting terminal for width of bus for area 0 (16 bit)
224
SCAN_TESTEN
-
Not used
225
AVCC-USB
-
Power supply terminal (+3.3V)
226
USB_D+
I/O
Two-way data bus of USB data (+)
Not used
227
USB_D-
I/O
Two-way data bus of USB data (-)
Not used
228
AVSS-USB
-
Ground terminal
229
USB2_P
-
Not used
230
USB2_M
-
Not used
231
AVCC-USB
-
Power supply terminal (+3.3V)
232
AVSS
-
Ground terminal
233
EVOL_DATA
I
Serial data input terminal from the audio select
234 to 236
AN3 to AN5
-
Not used
237
AVCC
-
Power supply terminal (+3.3V)
238, 239
AN5, AN7
-
Not used
240
AVSS
-
Ground terminal
56
"L": reset
MEX-BT5100
MAIN BOARD IC501 MB90F045PMC-G-9068-SPE1 (SYSTEM CONTROLLER) Pin No.
Pin Name
I/O
Description
1
NC
-
2
VOL_ATT
O
Not used Muting on/off control signal output to the audio select
3
NOSE_SW
I
Front panel remove/attach detection signal input terminal "L": front panel is attached Not used
4
NC
-
5
BEEP
O
Beep sound drive signal output terminal
6
DIAG
I
Diagnostic signal input from the power amplifier IC
7
IT_FSW_IN
I
"L": muting on
DC/DC converter oscillation frequency count input terminal for bluetooth section
9
VSS
-
DC/DC converter oscillation frequency count input terminal for fluorescent indicator tube section Ground terminal
10
TUNATT
O
Tuner muting on/off control signal output terminal
NC
-
Not used
O
Audio signal output select signal output terminal
-
Not used
8
11, 12
FSW_IN
I
15
SIGNAL_SW0, SIGNAL_SW1 NC
16
AUX_BUS
O
17
NSMASK
O
18
GUI_RST
O
Ground switching signal output of SONY bus/AUX audio input "L": AUX input, "H": SONY bus input Discharge control signal output for the noise detection circuit "H": discharge (AEP, UK models only) Reset signal output to the bluetooth controller, data bus interface and flash rom
19
ATT
O
Muting on/off control signal output terminal
20
SYSRST
O
Reset signal output to the SONY bus interface IC and CD system control
21
VCC5
-
Power supply terminal (+3.3V)
22
EESIO
I/O
Two-way data bus with the tuner unit
23
EECKO
O
Serial data transfer clock signal output to the tuner unit
24
AMPSTB
O
Standby control signal output to the power amplifier IC
25
GUI_RX
I
Serial data input from the bluetooth controller
26
GUI_TX
O
Serial data output to the bluetooth controller
27
MAS_PW
O
28
GUI_PW
I
29, 30
RE_IN0, RE_IN1
I
31
I2CCKO
O
IIC data transfer clock signal output terminal
32
I2CSIO
I/O
IIC two-way data bus
33
AVCC
-
Power supply terminal (+3.3V)
34
AVRH
I
Reference voltage (+3.3V) input terminal (for A/D conversion)
35
AVSS
-
Ground terminal
36
QUALITY
I
Noise level detection signal input at SEEK mode
37
VSM
I
FM and AM signal-meter voltage detection signal input from the tuner unit (A/D input)
38
NC
-
Not used
39
KEYIN0
I
Front panel key input terminal (A/D input)
40
VSS
-
Ground terminal
41
RC_IN0
I
Rotary remote commander key input terminal (A/D input)
42 to 46
NC
-
Not used
47 to 49
MD0 to MD2
I
Setting terminal for the CPU operational mode
50
KEY ACK
I
51
TUNATTIN
I
52
BUIN
I
Back up power supply detection signal input terminal
53
NC
-
Not used
54
DAVN
I
Synchronize detection signal input of RDS data block (AEP, UK models only)
55
NC
-
Not used
13, 14
State notification signal output to the bluetooth controller "H": state that can be communicated State notification signal input from the bluetooth controller "H": state that can be communicated Joystick pulse input from the rotary encoder
Acknowledge signal (wake up signal) input terminal for the key entry Acknowledge signal is input to accept any function key in the standby status On at input of "H" Attenuate request signal input from the tuner unit "L" is input at low voltage
56
UNISI
I
Serial data input from the SONY bus interface IC
57
UNISO
O
Serial data output to the SONY bus interface IC
58
UNISCK
O
Serial data transfer clock signal output to the SONY bus interface IC and CD system control
59, 60
NC
-
Not used
57
MEX-BT5100
Pin No.
Pin Name
I/O
61
DOOR_IND
O
LED drive signal output terminal for sub panel LED
Description
62
IT_POW
O
Power on/off control signal output terminal for the bluetooth section
63
IT_FSW_SFT
O
64
FSW_SFT
O
65
NC
-
DC/DC converter oscillation frequency shift control signal output terminal for bluetooth section DC/DC converter oscillation frequency shift control signal output terminal for fluorescent indicator tube section Not used
66
FLASH_W
I
Flash writing mode detection signal input terminal
"H": LED on
Not used
67
RAMBU
68
DOOR_SW
I
Internal RAM reset detection signal input from the reset signal generator Input terminal to check that RAM data are not destroyed due to low voltage "L": Writing mode Shutter of front panel open/close detection input terminal "H": Open, "L": Close
69
NC
-
Not used
70
ACC_IN
I
Accessory power detection signal input terminal
71 to 73
NC
-
Not used
74
AD_ON
O
I
"L": accessory power on
75
RESET
I
A/D converter power control signal output When the KEY ACK (pin 50) that controls reference voltage power for key A/D conversion input is active, "L" is output from this terminal to enable the input System reset signal input from the reset signal generator and reset switch "L": reset
76
RST_PROTECT
O
Reset protect control signal output terminal Sub system clock input terminal (32.768 kHz)
Not used
77
XIN
I
78
XOUT
O
Sub system clock output terminal (32.768 kHz)
79
VSS1
-
Ground terminal
80
OSCOUT
O
Main system clock output terminal (18.432 MHz)
81
OSCIN
I
Main system clock input terminal (18.432 MHz)
82
VCC3
-
Power supply terminal (+3.3V)
83
TELLATT
I
84
ILLIN
I
85
BUSON
O
Telephone muting detection signal input terminal At input of "H", the audio signal is attenuated by 20 dB Illuminate line detect signal input terminal for the automatic dimmer control "L": detected the illumination line (lighting is made dark) SONY bus on/off control signal output terminal "L": bus on
86
NC
-
Not used
87
FL_ON
O
Power on/off control signal output terminal for the fluorescent indicator tube section
88
FLD_ON
O
Power on/off control signal output terminal for the fluorescent indicator tube driver section
89
RC_IN1
I
Rotary remote commander shift key input terminal
90
PARKING
I
Side brake (parking brake) detection input terminal
91
EJECT_OK
O
CD eject OK signal output to the CD system control
92
NC
-
Not used
93
CDMUTE_IN
I
Muting on/off control signal input from the CD system control
94
CDON_IN
I
CD servo power supply detection input terminal
95
CDMON_IN
I
CD mecha power supply detection input terminal
96
TEST_IN
I
Test mode setting terminal
97
DEBUG
I
Debug mode setting terminal
98 to 100
AREASEL0 to AREASEL2
I
Model destination signal input terminal
58
"L": test mode "H": debug mode
Not used
MEX-BT5100
KEY BOARD IC704 uPD703263GC-111-8EA-A (FRONT PANEL CONTROLLER) Pin No.
Pin Name
I/O
Description
1
AVREF0
I
Reference voltage (+3.3V) input terminal (for A/D conversion)
2
AVSS
-
Ground terminal
3, 4
NC
-
Not used
5
AVREF1
I
Reference voltage (+3.3V) input terminal (for D/A conversion)
6, 7
NC
-
Not used
8
FLMD0
I
Flash programming mode input terminal Power supply terminal (+3.3V)
9
VDD
-
10
REGC
I
Regulator output stability capacity connection terminal
11
VSS
-
Ground terminal
12
X1
I
System clock input terminal (5 MHz)
13
X2
O
System clock output terminal (5 MHz)
14
RESET#
I
System reset signal input terminal
15
GND
-
Ground terminal
16, 17
NC
-
Not used
18
SH_IF
I/O
I: Communication interface signal input from the bluetooth controller O: Output terminal in Flash programming mode Not used
19 to 24
NC
-
25
BUS_TX
O
UART serial data output to the data bus interface
26
BUS_RX
I
UART serial data input from the data bus interface
27
EDGE_TGR1
I
Blanking signal input terminal
28
GCP_EDGE1
O
GCP trigger signal output terminal
29
GCP_TGR1
I
GCP trigger signal input terminal
30
GCP1
O
GCP trigger signal output terminal
31, 32
NC
-
Not used
33
EVSS
-
Ground terminal
34
EVDD
-
Power supply terminal (+3.3V)
35, 36
NC
-
Not used
37
LATCH
O
FL serial data latch control signal output terminal
38
NC
-
Not used
39
BK
O
Blanking signal output terminal
40
NC
-
Not used
41
FL_SO2
O
FL serial data output terminal
42
FL_CKI2
I
FL serial data transfer clock input terminal
43, 44
NC
-
Not used
45
GCP3
O
GCP trigger signal output terminal
46
GCP_TGR3
I
Blanking signal input terminal
47
GCP2
O
GCP trigger signal output terminal
48
GCP_TGR2
I
GCP trigger signal input terminal
49
GCP_EDGE2
O
GCP trigger signal output terminal
50
EDGE_TGR2
I
Blanking signal input terminal
51
FL_SO1
O
FL serial data output terminal
52
FL_CKO1
I
FL serial data transfer clock output terminal
53
NC
-
Not used
54
FL_SO3
O
FL serial data output terminal
55
FL_CKI3
I
FL serial data transfer clock input terminal
56
NC
-
Not used
57
SIRCS
I
Remote control signal input from the remote control receiver
58 to 67
NC
-
Not used
68
ENC_SEL
I
Terminal for encoder identification
69
BVSS
-
Ground terminal
"L": Made in the hoshiden, "H": Made in the alps
70
BVDD
-
Power supply terminal (+3.3V)
71
BT_LED1
O
LED drive signal output terminal for bluetooth indicator
72
KEY0_SW
O
Bus switch control signal output terminal
73
BT_LED2
O
LED drive signal output terminal for bluetooth indicator
74
BT_LED3
O
LED drive signal output terminal for bluetooth indicator
"H": bus switch active (KEY0 is reading enable)
59
MEX-BT5100
Pin No.
Pin Name
I/O
75
FLS_WRT
I
Flash writing mode detection signal input terminal
Description
76
FLMD1
-
Not used
77
ENTER
I
Enter key input terminal (A/D input)
78 to 88
NC
-
Not used
89
KEY1
I
Front panel key input terminal (A/D input)
90
KEY0
I
Front panel key input terminal (A/D input)
91
KEY2
I
Front panel key input terminal (A/D input)
92 to 99
NC
-
Not used
100
CTR FLMD
O
Flash programming mode output terminal
60
Not used
"H": Flash writing mode
MEX-BT5100 SECTION 6 EXPLODED VIEWS Note: • -XX and -X mean standardized parts, so they may have some difference from the original one. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • The mechanical parts with no reference number in the exploded views are not supplied.
6-1.
• Color Indication of Appearance Parts Example: KNOB, BALANCE (WHITE) . . . (RED) R R Parts Color Cabinet’s Color • Accessories are given in the last of the electrical parts list. • Abbreviation CND : Canadian model
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
OVERALL SECTION #1
CD mechanism deck section-1 (MG-611WA-186//Q)
not supplied
#2 #2
not supplied
8 9
16
not supplied (ANTENNA board)
9 15
17
12
11 #3
F901 #3
10 14
"
not not supplied supplied
#3
18 20
not supplied
not supplied
19 not supplied
TUX401
#1
#
not supplied "
MIC500
not supplied
7
# #1
6 13
3
2
not supplied
5
1 #1
front panel section Ref. No.
5
4 Remark
not supplied (SUB board)
Part No.
Description
Part No.
Description
1 2 3 4 5
X-2176-202-1 1-831-502-11 3-246-441-01 3-260-247-01 3-042-244-01
LOCK ASSY CABLE, FLEXIBLE FLAT (22 CORE) BUTTON (EJECT) (Z) CUSHION (SUB PANEL) SCREW (T)
Ref. No. 13 14 15 16 17
3-250-543-02 1-833-121-11 A-1364-127-A 1-834-678-11 2-134-636-01
SCREW (+B P-TITE M2) CABLE, FLEXIBLE FLAT (40 CORE) IT BOARD, COMPLETE LEAD WIRE WITH CONNECTOR SCREW (M1.7X3.5)
Remark
6 7 8 9 10
X-2109-671-2 X-2109-416-1 4-237-065-01 3-376-464-11 A-1364-132-A
PANEL ASSY, SUB GEAR ASSY CLAMP (L35) SCREW (+PTT 2.6X6), GROUND POINT MAIN BOARD, COMPLETE (AEP, UK)
18
1-790-355-54
19 20 F901 MIC500
2-668-792-01 2-021-848-01 1-532-877-11 1-542-689-11
CORD (WITH CONNECTOR) (RCA) (SUB OUT (MONO)) BRACKET (MIC) SHEET (TU), GROUND FUSE (BLADE TYPE) (AUTO FUSE) (10A/32V) MICROPHONE
10 10 11
A-1364-390-A A-1364-428-A 1-831-837-11
11
1-833-972-11
TUX401 #1 #2 #3
A-3220-961-B 7-685-792-09 7-685-790-01 7-685-793-09
TUNER UNIT (TUX-032//Q3) SCREW +PTT 2.6X6 (S) SCREW +PTT 2.6X4 (S) SCREW +PTT 2.6X8 (S)
12
3-264-798-01
MAIN BOARD, COMPLETE (E) MAIN BOARD, COMPLETE (US, CND) CORD (WITH CONNECTOR) (ISO) (POWER) (AEP, UK) CONNECTION CODE FOR AUTOMOBILE (POWER) (US, CND, E) CAP
61
MEX-BT5100
6-2.
FRONT PANEL SECTION
61
57
60
58
not supplied
ENC701
57
not supplied FL701 not supplied not supplied
not supplied (KEY board) not supplied not supplied not supplied not supplied
not supplied
not supplied not supplied
52
not supplied
51 55
not supplied
54
56 53
Ref. No.
Part No.
Description
51 52 53 53 53
2-668-789-01 2-668-785-01 X-2187-256-1 X-2187-257-1 X-2187-258-2
FILTER (IR) PLATE (KNOB), LIGHT GUIDE PANEL (SV) ASSY, FRONT (AEP, UK) PANEL (SV) ASSY, FRONT (US, CND) PANEL (SV) ASSY, FRONT (E)
54 55 56 56
X-2148-047-1 2-699-819-01 X-2187-259-1 X-2187-260-1
KNOB ASSY (S) SCREW, HEXAGON SOCKET SET BUTTON ASSY (S) (AEP, UK) BUTTON ASSY (S) (US, CND, E)
62
Remark
Ref. No.
Part No.
Description
57
3-250-543-02
SCREW (+B P-TITE M2)
58 60 61 61 61
X-2148-044-1 X-2109-722-1 A-1364-152-A A-1366-186-A A-1366-189-A
PANEL ASSY, FRONT BACK CASE ASSY, PANEL (for FRONT PANEL) PANEL OVERALL ASSY, FRONT (AEP, UK) PANEL OVERALL ASSY, FRONT (US, CND) PANEL OVERALL ASSY, FRONT (E)
ENC701 1-479-832-21 FL701 1-519-842-21
ENCODER, ROTARY (SWITCH) VACUUM FLUORESCENT DISPLAYS
Remark
MEX-BT5100
6-3.
CD MECHANISM DECK SECTION-1 (MG-611WA-186//Q)
not supplied
not supplied (SENSOR board)
not supplied
#4
not supplied
not supplied
CD mechanism deck section-2 (MG-611WA-186//Q)
not supplied
103
105
101
104
CD mechanism deck section-3 (MG-611WA-186//Q)
109
106
107
Ref. No. 101 103 104 105 106
Part No.
Description
A-3372-444-D 3-257-892-12 3-257-892-01 2-345-767-11 3-259-033-01
CHASSIS (T) SUB ASSY SPRING (DAMPER), COIL SPRING (DAMPER), COIL SPRING (KF60), TENSION DAMPER (S)
Remark
108
Ref. No. 107 108 109 #4
Part No.
Description
2-587-505-01 A-1132-412-A A-1079-935-A 7-627-552-87
SCREW SERVO BOARD, COMPLETE MECHANICAL BLOCK ASSY SCREW, PRECISION +P 1.7X2.2
Remark
63
MEX-BT5100
6-4.
CD MECHANISM DECK SECTION-2 (MG-611WA-186//Q)
155 156 154 (including spindle motor (M901))
157
#5
not supplied M902
not supplied (spindle motor (M901))
not supplied
SW4
not supplied
not supplied
158
153
not supplied
151
Ref. No.
152
Part No.
Description
151 152 0 153 154
A-1075-644-B 3-316-938-91 8-820-207-12 A-1075-645-A
155
A-1225-964-A
CHASSIS (OP) COMPLETE ASSY SCREW (B1.4X5), TAPPING OPTICAL PICK-UP (KSS1000E/C-RP1) CHASSIS (OP) SUB ASSY (including spindle motor (M901)) ARM SUB ASSY, CHUCKING
64
Remark
Ref. No. 156 157 158 M902 SW4 #5
Part No.
Description
A-3372-446-A X-2176-220-1 3-253-736-11 A-3372-447-A 1-786-339-11 7-627-850-77
LEVER (SL) SUB ASSY LEVER (SL) ASSY SPRING (CHKG), TENSION COIL MOTOR ASSY, SL (SLED) SWITCH (M) (LIMIT) SCREW, PRECISION +P 1.4X1.8
Remark
MEX-BT5100
6-5.
CD MECHANISM DECK SECTION-3 (MG-611WA-186//Q)
201
203
202
207 211 209
204
210
208
205
207 207
M903
206 #4
CD mechanism deck section-4 (MG-611WA-186//Q)
Ref. No.
Part No.
Description
201 202 203 204 205
3-348-993-01 2-186-699-31 A-1075-641-D 2-635-295-11 2-635-296-11
WASHER GEAR (RA1) ARM ASSY, ROLLER SPRING (RAL-B) SPRING (RAR-B)
206 207
3-259-469-12 2-134-636-21
SPRING (LE), LEAF SCREW (M1.7X2.5)
Remark
Ref. No.
Part No.
Description
208 209 210
2-186-696-31 3-345-648-91 A-1166-303-A
BRACKET (LEM-N) SCREW (M1.4), TOOTHED LOCK GEAR (LE-B) ASSY
211 M903 #4
2-186-697-31 A-1206-596-B 7-627-552-87
BEARING (LEB-N) LE MOTOR ASSY (A) (LOADING) SCREW, PRECISION +P 1.7X2.2
Remark
65
MEX-BT5100
6-6.
CD MECHANISM DECK SECTION-4 (MG-611WA-186//Q)
254
256 258
253
251
257
Ref. No. 251 253 254 256
66
Part No.
Description
2-186-700-31 3-259-470-33 3-253-755-43 2-590-545-34
GEAR (CHK1) GEAR (LE1) LEVER (D) GEAR (LE2-M)
Remark
Ref. No.
Part No.
Description
257
A-1075-640-C
CHASSIS (M) BLOCK ASSY
258
3-348-993-01
WASHER
Remark
MEX-BT5100 SECTION 7 ELECTRICAL PARTS LIST Note: • Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. • -XX and -X mean standardized parts, so they may have some difference from the original one. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • CAPACITORS uF: μF • COILS uH: μH Ref. No.
Part No.
• RESISTORS All resistors are in ohms. METAL: Metal-film resistor. METAL OXIDE: Metal oxide-film resistor. F: nonflammable • SEMICONDUCTORS In each case, u: μ, for example: uA. . : μA. . , uPA. . , μPA. . , uPB. . : μPB. . , uPC. . , μPC. . , uPD. . : μPD. . • Abbreviation CND : Canadian model
Description
Remark
CN1
1-821-559-11
When indicating parts by reference number, please include the board name.
Description
1-115-156-11 1-164-847-11 1-107-820-11 1-107-820-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
1uF 7PF 0.1uF 0.1uF
C578 C579 C580 C581 C583
1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-164-847-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 0.1uF 0.1uF 7PF
C584 C585 C586 C587 C588
1-107-820-11 1-107-820-11 1-107-820-11 1-164-935-11 1-164-935-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 0.1uF 470PF 470PF
10V 16V 10V 6.3V 10V
C589 C590 C591 C592 C593
1-107-820-11 1-115-156-11 1-115-156-11 1-107-820-11 1-107-820-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 1uF 1uF 0.1uF 0.1uF
10V 25V 25V 16V 10V
C594 C595 C596 C597 C598
1-107-820-11 1-164-931-11 1-107-820-11 1-164-931-11 1-107-820-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 100PF 0.1uF 100PF 0.1uF
CONNECTOR, COAXIAL (SMT TYPE) < JUMPER RESISTOR >
R1 1-218-990-81 SHORT CHIP 0 ************************************************************* A-1364-127-A
Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
Part No.
< CONNECTOR >
IT BOARD, COMPLETE ****************** < CAPACITOR >
Remark 0.5PF
10V 50V 16V 16V
0.5PF
16V 16V 16V 16V 50V
10% 10%
16V 16V 16V 50V 50V
C507 C512 C513 C514 C519
1-115-156-11 1-107-820-11 1-115-156-11 1-127-760-11 1-125-777-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
1uF 0.1uF 1uF 4.7uF 0.1uF
C520 C521 C522 C523 C524
1-125-777-11 1-100-567-81 1-100-567-81 1-107-820-11 1-117-720-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.01uF 0.01uF 0.1uF 4.7uF
10% 10% 10%
C529 C530 C531 C532 C533
1-127-760-11 1-127-760-11 1-127-760-11 1-127-760-11 1-164-939-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
4.7uF 4.7uF 4.7uF 4.7uF 0.0022uF
10% 10% 10% 10% 10%
6.3V 6.3V 6.3V 6.3V 50V
C599 C600 C601 C602 C603
1-164-931-11 1-107-820-11 1-107-820-11 1-164-931-11 1-107-820-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
100PF 0.1uF 0.1uF 100PF 0.1uF
10%
C534 C536 C538 C539 C540
1-164-939-11 1-164-931-11 1-164-936-11 1-164-936-11 1-164-936-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.0022uF 100PF 680PF 680PF 680PF
10% 10% 10% 10% 10%
50V 50V 50V 50V 50V
C604 C605 C606 C607 C608
1-164-931-11 1-107-820-11 1-107-820-11 1-164-931-11 1-107-820-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
100PF 0.1uF 0.1uF 100PF 0.1uF
10%
C541 C543 C549 C550 C553
1-164-936-11 1-107-820-11 1-164-931-11 1-164-931-11 1-107-820-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
680PF 0.1uF 100PF 100PF 0.1uF
10%
50V 16V 50V 50V 16V
C609 C610 C611 C612 C613
1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-164-931-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 0.1uF 0.1uF 100PF
C558 C562 C565 C570 C571
1-100-159-91 1-164-847-11 1-164-847-11 1-107-820-11 1-107-820-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
22uF 7PF 7PF 0.1uF 0.1uF
10% 0.5PF 0.5PF
6.3V 50V 50V 16V 16V
C614 C615 C616 C617 C618
1-164-931-11 1-107-820-11 1-107-820-11 1-107-820-11 1-164-931-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
100PF 0.1uF 0.1uF 0.1uF 100PF
10%
10%
50V 16V 16V 16V 50V
C572
1-107-820-11
CERAMIC CHIP 0.1uF
16V
C619
1-164-931-11
CERAMIC CHIP 100PF
10%
50V
10% 10%
10% 10%
IT
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
C573 C574 C576 C577
ANTENNA BOARD **************
Ref. No.
ANTENNA
16V 10V 10V 16V 16V 10% 10%
10%
10%
10%
16V 50V 16V 50V 16V 50V 16V 16V 50V 16V 50V 16V 16V 50V 16V 16V 16V 16V 16V 50V
67
MEX-BT5100 IT Ref. No.
Part No.
Description
C620 C621 C622 C623
1-107-820-11 1-107-820-11 1-164-931-11 1-107-820-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 100PF 0.1uF
Remark
C624 C625 C626 C627 C628
1-164-931-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
100PF 0.1uF 0.1uF 0.1uF 0.1uF
C629 C630 C631 C632 C634
1-107-820-11 1-107-820-11 1-164-931-11 1-137-710-91 1-100-611-91
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 100PF 10uF 22uF
C636 C640 C641 C647 C652
1-100-611-91 1-137-710-91 1-100-581-81 1-107-820-11 1-164-931-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
22uF 10uF 0.0047uF 0.1uF 100PF
20% 20% 10%
C653 C659 C660 C662 C663
1-164-931-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
100PF 0.1uF 0.1uF 0.1uF 0.1uF
10%
C665 C666 C667 C668 C669
1-164-931-11 1-164-931-11 1-164-931-11 1-164-931-11 1-164-931-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
100PF 100PF 100PF 100PF 100PF
C670 C671 C672 C673 C674
1-164-931-11 1-164-931-11 1-164-931-11 1-164-931-11 1-164-931-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
100PF 100PF 100PF 100PF 100PF
10% 10%
10% 20% 20%
10%
1-784-650-21 1-815-231-61
Ref. No. FB520
Part No.
Description
Remark
1-469-084-21
INDUCTOR, FERRITE BEAD (1005) < BLUETOOTH MODULE/IC >
50V 16V 16V 16V 16V
IC500 IC503 IC504 IC506 IC508
(Not supplied) 6-707-585-01 8-759-422-21 6-709-854-01 6-706-489-01
CXN1401-5AAL (BLUETOOTH MODULE) IC XC6219B332MR IC NJM4580V (TE2) IC XR16L2550IM-F IC TC7SH32FU (T5RSOYJF)
16V 16V 50V 6.3V 6.3V
IC510 IC511 IC512 IC513 IC514
(Not supplied) 6-709-853-01 6-711-942-01 6-709-857-01 6-705-468-01
IC IC IC IC IC
6.3V 6.3V 50V 16V 50V
IC517
6-704-324-01
IC S-80930CLNB-G60T2G
S29GL032A90BFIR40E-B510 HD6417727F100CV EM638325TS-6G S-1170B19UC-OTETFG BA33BC0FP-E2
< COIL > L500
1-469-757-21
INDUCTOR
10uH
< TRANSISTOR >
50V 16V 16V 16V 16V
Q501
10% 10% 10% 10% 10%
50V 50V 50V 50V 50V
R529 R530 R538 R539 R542
1-218-955-11 1-218-955-11 1-218-953-11 1-218-953-11 1-218-953-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
1.5K 1.5K 1K 1K 1K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
10% 10% 10% 10% 10%
50V 50V 50V 50V 50V
R543 R545 R546 R547 R548
1-218-953-11 1-218-956-11 1-218-956-11 1-218-941-81 1-218-951-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
1K 1.8K 1.8K 100 680
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R550 R551 R552 R553 R554
1-218-951-11 1-218-951-11 1-218-951-11 1-218-957-11 1-218-961-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
680 680 680 2.2K 4.7K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R555 R556 R558 R560 R562
1-218-956-11 1-218-956-11 1-218-990-81 1-218-945-11 1-218-990-81
RES-CHIP RES-CHIP SHORT CHIP RES-CHIP SHORT CHIP
1.8K 1.8K 0 220 0
5% 5%
1/16W 1/16W
5%
1/16W
R564 R572 R573 R579 R580
1-218-990-81 1-218-941-81 1-218-941-81 1-218-969-11 1-218-969-11
SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
0 100 100 22K 22K
5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W
R582 R583 R584 R591 R601
1-218-941-81 1-218-989-11 1-218-961-11 1-218-990-81 1-218-977-11
RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP
100 1M 4.7K 0 100K
5% 5% 5%
1/16W 1/16W 1/16W
5%
1/16W
R603 R606 R608 R609 R610
1-218-977-11 1-218-945-11 1-218-965-11 1-218-965-11 1-218-965-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
100K 220 10K 10K 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
1-218-965-11
RES-CHIP
10K
5%
1/16W
< CONNECTOR > CN500 CN505
16V 16V 50V 16V
CONNECTOR 2P CONNECTOR, FFC/FPC (ZIF) 40P
8-729-028-76
TRANSISTOR
DTA114YUA-T106
< RESISTOR >
< DIODE > D500 D501 D502 D503
8-719-941-09 6-501-743-01 6-500-460-01 6-500-460-01
DIODE DIODE DIODE DIODE
DAP202U MAZ8068GMLS0 RSX101M-30TR RSX101M-30TR
< FERRITE BEAD > FB500 FB501 FB502 FB503 FB504
1-469-084-21 1-469-084-21 1-469-084-21 1-469-084-21 1-469-084-21
INDUCTOR, FERRITE BEAD (1005) INDUCTOR, FERRITE BEAD (1005) INDUCTOR, FERRITE BEAD (1005) INDUCTOR, FERRITE BEAD (1005) INDUCTOR, FERRITE BEAD (1005)
FB505 FB506 FB507 FB508 FB509
1-469-084-21 1-469-084-21 1-469-084-21 1-469-084-21 1-469-084-21
INDUCTOR, FERRITE BEAD (1005) INDUCTOR, FERRITE BEAD (1005) INDUCTOR, FERRITE BEAD (1005) INDUCTOR, FERRITE BEAD (1005) INDUCTOR, FERRITE BEAD (1005)
FB510 FB511 FB514 FB517 FB518
1-469-084-21 1-469-084-21 1-469-084-21 1-469-084-21 1-469-084-21
INDUCTOR, FERRITE BEAD (1005) INDUCTOR, FERRITE BEAD (1005) INDUCTOR, FERRITE BEAD (1005) INDUCTOR, FERRITE BEAD (1005) INDUCTOR, FERRITE BEAD (1005)
R611
Note: When IC500 and 510 on the IT board are damaged, exchange the new IT board for the IT board which IC damaged.
68
MEX-BT5100 IT Ref. No.
Remark
Ref. No.
Part No.
Description
KEY
Part No.
Description
R612 R613 R619 R620
1-218-965-11 1-218-965-11 1-218-961-11 1-218-945-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP
10K 10K 4.7K 220
5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W
Remark
R621 R623 R626 R627 R628
1-218-945-11 1-218-937-11 1-218-977-11 1-218-965-11 1-218-941-81
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
220 47 100K 10K 100
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R629 R630 R632 R633 R634
1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
10K 10K 10K 10K 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R635 R637 R638 R639 R642
1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
10K 10K 10K 10K 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R647 R648 R649 R650 R651
1-218-937-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-937-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
47 10K 10K 10K 47
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R653 R654 R655 R656 R657
1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
10K 10K 10K 10K 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R658 R659 R685 R686 R688
1-218-965-11 1-218-965-11 1-218-965-11 1-218-937-11 1-218-965-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
10K 10K 10K 47 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R689 R690 R693 R695 R696
1-218-965-11 1-218-953-11 1-218-965-11 1-218-941-81 1-218-941-81
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
10K 1K 10K 100 100
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R697 R698 R699 R700 R701
1-218-941-81 1-218-941-81 1-218-937-11 1-218-937-11 1-218-937-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
100 100 47 47 47
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R702 R703 R704 R705 R706
1-218-937-11 1-218-937-11 1-218-937-11 1-218-937-11 1-218-937-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
47 47 47 47 47
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
C702 C703 C704 C709 C710
1-107-826-11 1-107-826-11 1-107-826-11 1-107-826-11 1-107-826-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 0.1uF 0.1uF 0.1uF
10% 10% 10% 10% 10%
16V 16V 16V 16V 16V
R707 R708 R709 R710 R711
1-218-937-11 1-218-937-11 1-218-937-11 1-218-937-11 1-218-937-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
47 47 47 47 47
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
C711 C712 C713 C714 C715
1-107-826-11 1-107-826-11 1-107-826-11 1-162-915-11 1-162-915-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 0.1uF 10PF 10PF
10% 10% 10% 0.5PF 0.5PF
16V 16V 16V 50V 50V
R712 R713 R714 R717 R718
1-218-937-11 1-218-941-81 1-218-941-81 1-218-941-81 1-218-965-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
47 100 100 100 10K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
C717 C718 C721 C722 C723
1-107-826-11 1-107-826-11 1-162-964-11 1-162-970-11 1-107-826-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 0.001uF 0.01uF 0.1uF
10% 10% 10% 10% 10%
16V 16V 50V 25V 16V
R719
1-218-941-81
RES-CHIP
100
5%
1/16W
C724
1-162-964-11
CERAMIC CHIP 0.001uF
10%
50V
< COMPOSITION CIRCUIT BLOCK > RB500 RB502 RB503 RB504 RB505
1-234-377-21 1-234-944-21 1-234-944-21 1-234-944-21 1-234-944-21
RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK
4.7K (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4)
RB506 RB508 RB509 RB510 RB511
1-234-944-21 1-234-944-21 1-234-944-21 1-234-944-21 1-234-944-21
RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK
47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4)
RB512 RB513 RB514 RB515 RB516
1-234-944-21 1-234-944-21 1-234-944-21 1-234-944-21 1-234-944-21
RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK
47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4)
RB517 RB518 RB519 RB520 RB521
1-234-944-21 1-234-944-21 1-234-944-21 1-234-944-21 1-234-944-21
RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK
47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4)
RB522 RB523 RB524 RB525 RB526
1-234-944-21 1-234-944-21 1-234-944-21 1-234-944-21 1-234-944-21
RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK
47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4)
RB527 RB528 RB529 RB530
1-234-944-21 1-234-944-21 1-234-944-21 1-234-944-21
RES, NETWORK RES, NETWORK RES, NETWORK RES, NETWORK
47 (1005X4) 47 (1005X4) 47 (1005X4) 47 (1005X4)
< SWITCH > S500
1-786-458-11
SWITCH, PUSH (1 KEY) (NOSE DETECT) < VIBRATOR >
X501 1-813-827-21 VIBRATOR, CRYSTAL (14.7456MHz) X503 1-813-828-21 VIBRATOR, CRYSTAL (12.5MHz) ************************************************************* KEY BOARD ********** < CAPACITOR >
69
MEX-BT5100 KEY Ref. No.
Part No.
Description
C725 C728 C729 C730
1-115-339-11 1-115-339-11 1-107-826-11 1-165-908-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 0.1uF 1uF
10% 10% 10% 10%
50V 50V 16V 10V
Remark
LED820 LED821
C731 C732
1-107-826-11 1-107-826-11
CERAMIC CHIP 0.1uF CERAMIC CHIP 0.1uF
10% 10%
16V 16V
Q701 Q801 Q802 Q803
< CONNECTOR > CN701
1-818-141-11
D701 D702 D703 D704 D705
6-501-743-01 6-501-743-01 6-501-743-01 6-501-743-01 8-719-060-48
DIODE DIODE DIODE DIODE DIODE
MAZ8068GMLS0 MAZ8068GMLS0 MAZ8068GMLS0 MAZ8068GMLS0 RB751V-40TE-17
D706 D707 D709 D710 D713
6-501-743-01 6-501-743-01 6-501-743-01 6-501-743-01 6-501-743-01
DIODE DIODE DIODE DIODE DIODE
MAZ8068GMLS0 MAZ8068GMLS0 MAZ8068GMLS0 MAZ8068GMLS0 MAZ8068GMLS0
D715 D718 D719
6-501-743-01 6-501-782-01 6-501-743-01
DIODE MAZ8068GMLS0 DIODE MAZ8180GMLS0 DIODE MAZ8068GMLS0 < IC >
6-709-864-01 6-709-458-01 6-600-629-01 6-807-812-01 6-600-060-01
IC IC IC IC IC
SN74CB3T1G125DCKR XC61CN2802NR RS-470 uPD703263GC-111-8EA-A TC7WZ32FK (TE85R)
< LED > LED801
6-501-376-01
LED802
6-501-376-01
LED803
6-501-376-01
LED804 LED805
6-501-376-01 6-501-376-01
LED SO-194S-WM-SD-T (BLUETOOTH INDICATOR) LED SO-194S-WM-SD-T (BLUETOOTH INDICATOR) LED SO-194S-WM-SD-T (BLUETOOTH INDICATOR) LED SO-194S-WM-SD-T (MENU) LED SO-194S-WM-SD-T (SOURCE)
LED806 LED807 LED808 LED809 LED810
6-501-376-01 6-501-376-01 6-501-376-01 6-501-376-01 6-501-376-01
LED LED LED LED LED
SO-194S-WM-SD-T (4) SO-194S-WM-SD-T (BBE MP, 5) SO-194S-WM-SD-T (SHUF, 2) SO-194S-WM-SD-T (3) SO-194S-WM-SD-T (AF/TA) (AEP, UK)
LED810 LED811 LED812 LED813 LED814
6-501-376-01 6-501-376-01 6-501-376-01 6-501-376-01 6-501-376-01
LED LED LED LED LED
SO-194S-WM-SD-T (SCRL) (US, CND, E) SO-194S-WM-SD-T (REP, 1) SO-194S-WM-SD-T (Bluetooth) SO-194S-WM-SD-T (CALL) SO-194S-WM-SD-T (OFF)
LED815 LED816
6-501-376-01 6-501-376-01
LED817
6-501-376-01
LED818
6-501-376-01
LED819
6-501-376-01
LED SO-194S-WM-SD-T (MODE) LED SO-194S-WM-SD-T (PUSH LIST, . >, VOL) LED SO-194S-WM-SD-T (PUSH LIST, . >, VOL) LED SO-194S-WM-SD-T (PUSH LIST, . >, VOL) LED SO-194S-WM-SD-T (PUSH LIST, . >, VOL)
LED820
6-501-376-01
70
Part No.
Description
6-501-376-01 6-501-376-01
LED SO-194S-WM-SD-T (DSPL) (US, CND, E) LED SO-194S-WM-SD-T (PAUSE, 6)
LED SO-194S-WM-SD-T (PTY, DSPL) (AEP, UK)
Remark
< TRANSISTOR > 8-729-038-28 8-729-038-28 8-729-038-28 8-729-038-28
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
RT1N441C-TP-1 RT1N441C-TP-1 RT1N441C-TP-1 RT1N441C-TP-1
< RESISTOR >
PLUG, CONNECTOR 20P < DIODE >
IC701 IC702 IC703 IC704 IC705
Ref. No.
R003 R004 R701 R703 R704
1-218-871-11 1-216-809-11 1-216-837-11 1-216-801-11 1-216-845-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 100 22K 22 100K
0.5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R705 R706 R707 R708 R709
1-216-801-11 1-216-801-11 1-216-864-11 1-216-801-11 1-216-801-11
METAL CHIP METAL CHIP SHORT CHIP METAL CHIP METAL CHIP
22 22 0 22 22
5% 5%
1/10W 1/10W
5% 5%
1/10W 1/10W
R710 R711 R712 R713 R714
1-216-801-11 1-216-801-11 1-216-801-11 1-216-801-11 1-216-801-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
22 22 22 22 22
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R715 R716 R717 R718 R719
1-216-801-11 1-216-801-11 1-216-801-11 1-216-864-11 1-216-845-11
METAL CHIP METAL CHIP METAL CHIP SHORT CHIP METAL CHIP
22 22 22 0 100K
5% 5% 5%
1/10W 1/10W 1/10W
5%
1/10W
R720 R721 R722 R723 R724
1-216-845-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-845-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
100K 100 100 100 100K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R726 R727 R731 R742 R745
1-216-845-11 1-216-864-11 1-216-809-11 1-216-845-11 1-218-871-11
METAL CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP
100K 0 100 100K 10K
5%
1/10W
5% 5% 0.5%
1/10W 1/10W 1/10W
R746 R749 R751 R757 R761
1-216-809-11 1-216-809-11 1-216-819-11 1-216-819-11 1-216-821-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
100 100 680 680 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R762 R763 R764 R766 R767
1-216-819-11 1-216-819-11 1-216-819-11 1-216-821-11 1-216-833-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
680 680 680 1K 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R768 R769 R770 R771 R773
1-216-819-11 1-216-819-11 1-216-819-11 1-216-821-11 1-216-809-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
680 680 680 1K 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R774 R775 R778 R779 R780
1-216-819-11 1-216-823-11 1-216-821-11 1-216-823-11 1-216-823-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
680 1.5K 1K 1.5K 1.5K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
MEX-BT5100 KEY Ref. No.
Remark
Ref. No.
Part No.
Description
A-1364-132-A A-1364-390-A A-1364-428-A
MAIN BOARD, COMPLETE (AEP, UK) MAIN BOARD, COMPLETE (E) MAIN BOARD, COMPLETE (US, CND) *****************************
7-621-284-40 7-685-134-19 7-685-793-09 7-685-795-09
SCREW +P 2.6X10 SCREW +P 2.6X8 TYPE2 NON-SLIT SCREW +PTT 2.6X8 (S) SCREW +PTT 2.6X12 (S)
MAIN
Part No.
Description
R781 R785 R788 R793 R795
1-216-825-11 1-216-827-11 1-216-829-11 1-216-009-91 1-216-295-91
METAL CHIP METAL CHIP METAL CHIP RES-CHIP SHORT CHIP
2.2K 3.3K 4.7K 22 0
5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W
Remark
R801 R802 R803 R804 R805
1-216-823-11 1-216-823-11 1-216-823-11 1-216-823-11 1-216-823-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
1.5K 1.5K 1.5K 1.5K 1.5K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R806 R807 R808 R809 R810
1-216-823-11 1-216-825-11 1-216-825-11 1-216-825-11 1-216-825-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
1.5K 2.2K 2.2K 2.2K 2.2K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
C101 C102 C103 C104 C105
1-162-970-11 1-162-970-11 1-112-302-11 1-115-340-11 1-126-963-11
CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP ELECT
0.01uF 0.01uF 3300uF 0.22uF 4.7uF
10% 10% 20% 10% 20%
25V 25V 16V 25V 50V
R811 R812 R813 R814 R815
1-216-823-11 1-216-823-11 1-216-823-11 1-216-823-11 1-216-823-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
1.5K 1.5K 1.5K 1.5K 1.5K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
C106 C108 C109 C111 C112
1-126-960-11 1-107-826-11 1-107-826-11 1-165-908-11 1-107-826-11
ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
1uF 0.1uF 0.1uF 1uF 0.1uF
20% 10% 10% 10% 10%
50V 16V 16V 10V 16V
R816 R817 R818 R819 R820
1-216-823-11 1-216-823-11 1-216-823-11 1-216-829-11 1-216-829-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
1.5K 1.5K 1.5K 4.7K 4.7K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
C113 C115 C117 C118 C119
1-126-935-11 1-115-416-11 1-162-927-11 1-107-826-11 1-107-826-11
ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
470uF 0.001uF 100PF 0.1uF 0.1uF
20% 5% 5% 10% 10%
16V 25V 50V 16V 16V
R821 R822 R823 R824 R825
1-216-823-11 1-216-823-11 1-216-823-11 1-216-823-11 1-216-823-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
1.5K 1.5K 1.5K 1.5K 1.5K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
C121 C122 C123 C124 C125
1-162-965-11 1-117-288-61 1-162-966-11 1-162-964-11 1-113-340-11
CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP ELECT
0.0015uF 100uF 0.0022uF 0.001uF 47uF
10% 20% 10% 10% 20%
50V 16V 50V 50V 25V
R826 R827 R828 R829
1-216-823-11 1-216-864-11 1-216-864-11 1-216-864-11
METAL CHIP SHORT CHIP SHORT CHIP SHORT CHIP
1.5K 0 0 0
5%
1/10W
C126 C127 C154 C201 C202
1-164-315-11 1-162-923-11 1-115-340-11 1-115-340-11 1-107-906-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT
470PF 47PF 0.22uF 0.22uF 10uF
5% 5% 10% 10% 20%
50V 50V 25V 25V 50V
C203 C204 C205 C206 C207
1-162-970-11 1-162-970-11 1-107-906-11 1-162-970-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 10uF 0.01uF 0.01uF
10% 10% 20% 10% 10%
25V 25V 50V 25V 25V
C208 C209 C210 C211 C212
1-107-906-11 1-107-882-11 1-115-340-11 1-115-340-11 1-165-908-11
ELECT ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
10uF 100uF 0.22uF 0.22uF 1uF
20% 20% 10% 10% 10%
50V 16V 25V 25V 10V
C213 C217 C219 C220 C221
1-165-908-11 1-165-908-11 1-165-908-11 1-115-340-11 1-115-340-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
1uF 1uF 1uF 0.22uF 0.22uF
10% 10% 10% 10% 10%
10V 10V 10V 25V 25V
C222 C223 C224 C225 C226
1-124-695-85 1-115-467-11 1-126-961-11 1-162-923-11 1-165-908-11
ELECT CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP
22uF 0.22uF 2.2uF 47PF 1uF
20% 10% 20% 5% 10%
25V 10V 50V 50V 10V
C227 C228 C229 C230 C231
1-165-908-11 1-165-908-11 1-165-908-11 1-107-906-11 1-126-964-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT ELECT
1uF 1uF 1uF 10uF 10uF
10% 10% 10% 20% 20%
10V 10V 10V 50V 50V
< CAPACITOR >
< SWITCH > S701 S702 S703 S704 S705
1-786-653-21 1-786-653-21 1-786-653-21 1-786-653-21 1-786-653-21
SWITCH, TACTILE (OFF) SWITCH, TACTILE (SOURCE) SWITCH, TACTILE (CALL) SWITCH, TACTILE (MENU) SWITCH, TACTILE (Bluetooth)
S706 S706 S707 S707 S708
1-786-653-21 1-786-653-21 1-786-653-21 1-786-653-21 1-786-653-21
SWITCH, TACTILE (DSPL) (US, CND, E) SWITCH, TACTILE (PTY, DSPL) (AEP, UK) SWITCH, TACTILE (AF/TA) (AEP, UK) SWITCH, TACTILE (SCRL) (US, CND, E) SWITCH, TACTILE (MODE)
S709 S710 S711 S712 S713
1-786-653-21 1-786-653-21 1-786-653-21 1-786-653-21 1-786-653-21
SWITCH, TACTILE (PAUSE, 6) SWITCH, TACTILE (BBE MP, 5) SWITCH, TACTILE (4) SWITCH, TACTILE (3) SWITCH, TACTILE (SHUF, 2)
S714
1-786-653-21
SWITCH, TACTILE (REP, 1) < VIBRATOR >
X701 1-813-487-21 VIBRATOR, CRYSTAL (5MHz) *************************************************************
71
MEX-BT5100 MAIN Ref. No.
Part No.
Description
Part No.
Description
C301 C302 C303 C304 C305
1-162-965-11 1-162-965-11 1-136-153-00 1-136-153-00 1-115-467-11
CERAMIC CHIP CERAMIC CHIP FILM FILM CERAMIC CHIP
0.0015uF 0.0015uF 0.012uF 0.012uF 0.22uF
10% 10% 5% 5% 10%
50V 50V 50V 50V 10V
C416
1-107-826-11
CERAMIC CHIP 0.1uF
10%
C417
1-107-826-11
CERAMIC CHIP 0.1uF
10%
C418
1-107-826-11
CERAMIC CHIP 0.1uF
10%
C306 C307 C308 C309 C310
1-115-467-11 1-162-927-11 1-124-717-85 1-162-927-11 1-124-717-85
CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP ELECT
0.22uF 100PF 1uF 100PF 1uF
10% 5% 20% 5% 20%
10V 50V 50V 50V 50V
C419
1-107-826-11
CERAMIC CHIP 0.1uF
10%
C420
1-107-826-11
CERAMIC CHIP 0.1uF
10%
C421
1-162-918-11
CERAMIC CHIP 18PF
5%
C311 C312 C313 C314 C315
1-162-927-11 1-126-960-11 1-162-927-11 1-126-960-11 1-162-927-11
CERAMIC CHIP ELECT CERAMIC CHIP ELECT CERAMIC CHIP
100PF 1uF 100PF 1uF 100PF
5% 20% 5% 20% 5%
50V 50V 50V 50V 50V
C422
1-126-947-11
ELECT
20%
C423
1-162-970-11
CERAMIC CHIP 0.01uF
10%
C424
1-162-918-11
CERAMIC CHIP 18PF
5%
C316 C317 C318 C319 C320
1-126-960-11 1-124-721-85 1-124-673-85 1-162-970-11 1-124-721-85
ELECT ELECT ELECT CERAMIC CHIP ELECT
1uF 10uF 100uF 0.01uF 10uF
20% 20% 20% 10% 20%
50V 50V 10V 25V 50V
C425
1-107-826-11
CERAMIC CHIP 0.1uF
10%
C321 C322 C323 C324 C325
1-124-721-85 1-124-721-85 1-124-721-85 1-124-721-85 1-162-964-11
ELECT ELECT ELECT ELECT CERAMIC CHIP
10uF 10uF 10uF 10uF 0.001uF
20% 20% 20% 20% 10%
50V 50V 50V 50V 50V
C501 C502 C504 C506
1-162-970-11 1-162-970-11 1-162-970-11 1-162-917-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 15PF
10% 10% 10% 5%
16V (AEP, UK) 25V 25V 25V 50V
C326 C327 C328 C329 C330
1-162-927-11 1-162-927-11 1-162-927-11 1-162-927-11 1-162-927-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
100PF 100PF 100PF 100PF 100PF
5% 5% 5% 5% 5%
50V 50V 50V 50V 50V
C507 C508 C509 C511 C512
1-162-917-11 1-107-826-11 1-107-826-11 1-107-826-11 1-126-961-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT
15PF 0.1uF 0.1uF 0.1uF 2.2uF
5% 10% 10% 10% 20%
50V 16V 16V 16V 50V
C331 C332 C334 C335 C337
1-162-927-11 1-162-927-11 1-126-947-11 1-124-721-85 1-162-923-11
CERAMIC CHIP CERAMIC CHIP ELECT ELECT CERAMIC CHIP
100PF 100PF 47uF 10uF 47PF
5% 5% 20% 20% 5%
50V 50V 35V 50V 50V
C513 C514 C515 C516 C517
1-162-970-11 1-126-933-11 1-162-970-11 1-126-933-11 1-126-924-11
CERAMIC CHIP ELECT CERAMIC CHIP ELECT ELECT
0.01uF 100uF 0.01uF 100uF 330uF
10% 20% 10% 20% 20%
25V 16V 25V 16V 10V
C338 C339 C341 C342 C343
1-126-947-11 1-162-923-11 1-124-721-85 1-126-964-11 1-124-721-85
ELECT CERAMIC CHIP ELECT ELECT ELECT
47uF 47PF 10uF 10uF 10uF
20% 5% 20% 20% 20%
35V 50V 50V 50V 50V
C518 C519 C520 C521 C522
1-126-916-11 1-162-970-11 1-126-933-11 1-126-933-11 1-162-970-11
ELECT CERAMIC CHIP ELECT ELECT CERAMIC CHIP
1000uF 0.01uF 100uF 100uF 0.01uF
20% 10% 20% 20% 10%
6.3V 25V 16V 16V 25V
C345 C348 C349 C351 C352
1-124-721-85 1-107-826-11 1-107-826-11 1-162-964-11 1-162-964-11
ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
10uF 0.1uF 0.1uF 0.001uF 0.001uF
20% 10% 10% 10% 10%
50V 16V 16V 50V 50V
C525 C526 C527 C528 C530
1-126-933-11 1-162-970-11 1-162-970-11 1-126-933-11 1-162-970-11
ELECT CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP
100uF 0.01uF 0.01uF 100uF 0.01uF
20% 10% 10% 20% 10%
16V 25V 25V 16V 25V
C401 C403 C405 C406 C407
1-162-970-11 1-126-933-11 1-162-970-11 1-162-970-11 1-107-826-11
CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 100uF 0.01uF 0.01uF 0.1uF
10% 20% 10% 10% 10%
25V 16V 25V 25V 16V (US, CND, E)
C531 C603 C604 C605 C606
1-107-826-11 1-126-933-11 1-115-416-11 1-164-230-11 1-165-908-11
CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 100uF 0.001uF 220PF 1uF
10% 20% 5% 5% 10%
16V 16V 25V 50V 10V
C408
1-126-963-11
ELECT
4.7uF
20%
1-117-288-61 1-165-176-11 1-165-875-11 1-162-965-11 1-127-715-91
ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
100uF 0.047uF 10uF 0.0015uF 0.22uF
20% 10% 10% 10% 10%
16V 16V 10V 50V 16V
C409 C412 C413 C414
1-162-970-11 1-162-970-11 1-126-933-11 1-162-970-11
CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP
0.01uF 0.01uF 100uF 0.01uF
10% 10% 20% 10%
50V (AEP, UK) 25V 25V 16V 25V
C607 C608 C609 C610 C611 C612 C613 C614 C615 C616
1-125-889-11 1-107-823-11 1-100-672-11 1-137-980-91 1-114-207-51
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT
2.2uF 0.47uF 10uF 0.47uF 56uF
10% 10% 20% 10% 20%
10V 16V 16V 50V 63V
C415
1-162-959-11
CERAMIC CHIP 330PF
C617 C618 C619
1-137-980-91 1-100-623-91 1-126-934-11
CERAMIC CHIP 0.47uF CERAMIC CHIP 0.1uF ELECT 220uF
10% 10% 20%
50V 100V 16V
72
Remark
5%
50V (AEP, UK)
Ref. No.
Remark
47uF
16V (AEP, UK) 16V (AEP, UK) 16V (AEP, UK) 16V (AEP, UK) 16V (AEP, UK) 50V (AEP, UK) 35V (AEP, UK) 25V (AEP, UK) 50V (AEP, UK)
MEX-BT5100 MAIN Ref. No.
Part No.
Description
C620 C621
1-107-826-11 1-107-826-11
CERAMIC CHIP 0.1uF CERAMIC CHIP 0.1uF
10% 10%
16V 16V
Remark
C622 C623 C624 C625 C627
1-162-970-11 1-107-826-11 1-107-826-11 1-127-715-91 1-127-715-91
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.1uF 0.1uF 0.22uF 0.22uF
10% 10% 10% 10% 10%
25V 16V 16V 16V 16V
C629 C630 C631 C632 C633
1-162-964-11 1-162-965-11 1-164-217-11 1-164-315-11 1-162-964-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.001uF 0.0015uF 150PF 470PF 0.001uF
10% 10% 5% 5% 10%
50V 50V 50V 50V 50V
Ref. No.
Part No.
Description
D401 D501 D503
6-501-734-01 6-500-334-01 8-719-060-48
DIODE MAZ8056GMLS0 DIODE MC2836-T112-1 DIODE RB751V-40TE-17
Remark
D505 D506 D507 D510 D511
6-501-193-01 8-719-060-48 8-719-060-48 8-719-060-48 8-719-992-02
DIODE DIODE DIODE DIODE DIODE
1SS355WTE-17 RB751V-40TE-17 RB751V-40TE-17 RB751V-40TE-17 RB705D
D512 D601 D602 D603 D604
8-719-060-48 8-719-053-18 8-719-053-18 6-501-782-01 6-501-743-01
DIODE DIODE DIODE DIODE DIODE
RB751V-40TE-17 1SR154-400TE-25 1SR154-400TE-25 MAZ8180GMLS0 MAZ8068GMLS0
D605 D606 D607 D608 D610
8-719-060-48 6-501-422-01 6-501-123-01 6-501-123-01 6-501-123-01
DIODE DIODE DIODE DIODE DIODE
RB751V-40TE-17 RSX501LA-20TR RB160M-60TR RB160M-60TR RB160M-60TR
D611 D614 D615 D616 D617
6-501-743-01 6-501-782-01 6-501-730-01 8-719-060-48 8-719-053-18
DIODE DIODE DIODE DIODE DIODE
MAZ8068GMLS0 MAZ8180GMLS0 MAZ8051GMLS0 RB751V-40TE-17 1SR154-400TE-25
D620 D621 D622 D623 D624
6-501-743-01 6-501-738-01 6-501-738-01 6-501-738-01 6-501-738-01
DIODE DIODE DIODE DIODE DIODE
MAZ8068GMLS0 MAZ8062GMLS0 MAZ8062GMLS0 MAZ8062GMLS0 MAZ8062GMLS0
D625 D626 D627 D628 D629
6-501-738-01 6-501-734-01 6-501-734-01 6-501-738-01 6-501-743-01
DIODE DIODE DIODE DIODE DIODE
MAZ8062GMLS0 MAZ8056GMLS0 MAZ8056GMLS0 MAZ8062GMLS0 MAZ8068GMLS0
< CONNECTOR > * CN301 CN503 * CN601
1-564-506-11 1-820-480-51 1-770-529-31
PLUG, CONNECTOR 3P CONNECTOR, FFC/FPC (ZIF) 40P CONNECTOR, FFC/FPC 22P < JACK >
CNJ351
1-566-822-41
JACK (REMOTE IN) < CONNECTOR >
CNP101 1-774-701-21 CNP102 1-580-907-41 CNP501 1-817-536-11
PIN, CONNECTOR 16P PLUG, CONNECTOR (BUS CONTROL IN) CONNECTOR, BOARD TO BOARD 28P < DIODE >
D101 D102 D103 D104 D105
8-719-053-18 8-719-053-18 8-719-053-18 8-719-053-18 8-719-053-18
DIODE DIODE DIODE DIODE DIODE
1SR154-400TE-25 1SR154-400TE-25 1SR154-400TE-25 1SR154-400TE-25 1SR154-400TE-25
D106 D107 D108 D109 D110
8-719-053-18 8-719-053-18 8-719-053-18 8-719-053-18 8-719-053-18
DIODE DIODE DIODE DIODE DIODE
1SR154-400TE-25 1SR154-400TE-25 1SR154-400TE-25 1SR154-400TE-25 1SR154-400TE-25
D111 D112 D113 D114 D115
8-719-053-18 8-719-053-18 6-501-743-01 6-501-571-01 6-501-782-01
DIODE DIODE DIODE DIODE DIODE
1SR154-400TE-25 1SR154-400TE-25 MAZ8068GMLS0 1N5404-C311-3 MAZ8180GMLS0
D116 D118 D121 D122 D123
6-501-193-01 6-501-730-01 8-719-988-82 6-501-782-01 6-501-782-01
DIODE DIODE DIODE DIODE DIODE
1SS355WTE-17 MAZ8051GMLS0 RB715F MAZ8180GMLS0 MAZ8180GMLS0
D124 D125 D126 D127 D128
8-719-060-48 6-501-738-01 6-501-782-01 6-500-335-01 6-501-422-01
DIODE DIODE DIODE DIODE DIODE
RB751V-40TE-17 MAZ8062GMLS0 MAZ8180GMLS0 MC2838-T112-1 RSX501LA-20TR
D129 D130 D301 D302 D304
6-501-782-01 6-501-743-01 6-501-743-01 6-501-193-01 6-501-193-01
DIODE DIODE DIODE DIODE DIODE
MAZ8180GMLS0 MAZ8068GMLS0 MAZ8068GMLS0 1SS355WTE-17 1SS355WTE-17
D305 D306
6-501-193-01 8-719-073-35
DIODE 1SS355WTE-17 DIODE RB551V-30TE-17
< IC > IC101 IC102 IC201 IC301 IC302
6-709-863-01 6-703-884-01 6-705-359-02 6-707-303-01 6-701-105-01
IC IC IC IC IC
BD9300FV-FE2 BA8271F-E2 TDA8588AJ/N2/R1 TDA7419TR NJM2750M-TE2
IC401 IC501 IC502 IC504 IC601
6-803-747-01 6-807-813-01 6-709-458-01 6-711-653-01 6-706-884-01
IC IC IC IC IC
TDA7333013TR (AEP, UK) MB90F045PMC-G-9068-SPE1 XC61CN2802NR S-1206B33-U3T1G BD9851EFV-E2
IC602
6-707-281-01
IC MM1613DNLE < JACK >
J401
1-815-185-13
JACK (ANT) (ANTENNA IN) < COIL >
L101 L103 L104 L501 L502
1-456-617-11 1-481-081-11 1-481-081-11 1-414-394-41 1-414-398-11
COIL, CHOKE INDUCTOR INDUCTOR INDUCTOR INDUCTOR
47uH 47uH 2.2uH 10uH
L503 L601 L602 L603
1-414-394-41 1-481-104-11 1-457-073-11 1-457-220-21
INDUCTOR INDUCTOR INDUCTOR INDUCTOR
2.2uH 100uH 47uH 150uH
73
MEX-BT5100 MAIN Ref. No. L604
Part No.
Description
1-414-394-41
INDUCTOR
Remark 2.2uH
< JACK > PJ301
1-774-700-11
JACK, PIN 6P (AUDIO OUT FRONT/REAR, BUS AUDIO IN/AUX IN) < TRANSISTOR >
Q101 Q102 Q103 Q104 Q105
8-729-120-28 8-729-120-28 8-729-120-28 8-729-048-87 8-729-120-28
TRANSISTOR TRANSISTOR TRANSISTOR FET TRANSISTOR
2SC1623-L5L6 2SC1623-L5L6 2SC1623-L5L6 2SJ518AZTR 2SC1623-L5L6
Q106 Q108 Q109 Q110 Q111
8-729-026-49 8-729-027-23 8-729-027-23 8-729-027-43 8-729-027-43
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
2SA1037AK-T146-R DTA114EKA-T146 DTA114EKA-T146 DTC114EKA-T146 DTC114EKA-T146
Q112 Q113 Q114 Q115 Q116
8-729-038-28 8-729-027-23 8-729-027-43 8-729-050-41 8-729-038-28
TRANSISTOR TRANSISTOR TRANSISTOR FET TRANSISTOR
RT1N441C-TP-1 DTA114EKA-T146 DTC114EKA-T146 2SJ360-TE12L RT1N441C-TP-1
Q117 Q301 Q302 Q303 Q304
8-729-027-43 6-551-856-01 6-551-856-01 6-551-856-01 6-551-856-01
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
DTC114EKA-T146 LTC614TKFP8T146 LTC614TKFP8T146 LTC614TKFP8T146 LTC614TKFP8T146
Q305 Q306 Q307 Q308 Q401
6-551-856-01 6-550-683-01 8-729-027-23 8-729-038-28 8-729-038-28
TRANSISTOR FET TRANSISTOR TRANSISTOR TRANSISTOR
LTC614TKFP8T146 RJK005N03-T146 DTA114EKA-T146 RT1N441C-TP-1 RT1N441C-TP-1 (AEP, UK)
Q402 Q403 Q404 Q501 Q601
8-729-106-68 8-729-026-49 8-729-038-28 8-729-027-23 8-729-050-41
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR FET
2SD1615A-GP 2SA1037AK-T146-R (AEP, UK) RT1N441C-TP-1 (AEP, UK) DTA114EKA-T146 2SJ360-TE12L
Q602 Q603 Q604 Q605 Q606
8-729-038-28 8-729-050-41 6-551-477-01 6-551-268-01 6-551-696-01
TRANSISTOR FET FET TRANSISTOR TRANSISTOR
RT1N441C-TP-1 2SJ360-TE12L 2SK2963 2SC5625 ISA1235AC1TP-1EF
Q607 Q608 Q609 Q610 Q611
6-551-268-01 6-551-478-01 8-729-620-07 6-551-696-01 8-729-027-43
TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR
2SC5625 2SA2114TL 2SC3052EF-T1-LEF ISA1235AC1TP-1EF DTC114EKA-T146
< RESISTOR >
Ref. No.
Part No.
Description
R112 R113 R114 R115
1-216-841-11 1-216-829-11 1-216-841-11 1-216-073-91
METAL CHIP METAL CHIP METAL CHIP RES-CHIP
47K 4.7K 47K 10K
5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W
Remark
R116 R117 R118 R119 R120
1-216-821-11 1-216-821-11 1-216-823-11 1-216-801-11 1-216-797-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
1K 1K 1.5K 22 10
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R121 R122 R123 R124 R125
1-218-289-11 1-216-833-11 1-216-835-11 1-216-821-11 1-216-821-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
510 10K 15K 1K 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R127 R128 R129 R130 R131
1-216-851-11 1-216-851-11 1-216-841-11 1-216-809-11 1-216-077-91
METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES-CHIP
330K 330K 47K 100 15K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R132 R133 R134 R135 R136
1-216-809-11 1-216-829-11 1-216-049-11 1-216-029-00 1-216-029-00
METAL CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP
100 4.7K 1K 150 150
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R137 R138 R139 R141 R142
1-216-029-00 1-216-838-11 1-216-845-11 1-218-882-11 1-218-871-11
RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
150 27K 100K 30K 10K
5% 5% 5% 0.5% 0.5%
1/10W 1/10W 1/10W 1/10W 1/10W
R143 R144 R145 R205 R206
1-216-841-11 1-216-833-11 1-216-049-11 1-216-841-11 1-216-811-11
METAL CHIP METAL CHIP RES-CHIP METAL CHIP METAL CHIP
47K 10K 1K 47K 150
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R301 R302 R304 R305 R308
1-216-833-11 1-216-833-11 1-216-833-11 1-216-833-11 1-216-809-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 10K 10K 10K 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R309 R310 R311 R312 R313
1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
100 100 100 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R314 R315 R316 R317 R318
1-216-833-11 1-216-833-11 1-216-809-11 1-216-809-11 1-216-833-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 10K 100 100 10K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R101 R102 R103 R104 R105
1-216-821-11 1-216-821-11 1-216-841-11 1-216-833-11 1-216-821-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
1K 1K 47K 10K 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R319 R320 R321 R322 R323
1-216-833-11 1-216-809-11 1-216-809-11 1-216-833-11 1-216-809-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 100 100 10K 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R106 R107 R108 R109 R110
1-216-833-11 1-216-073-91 1-216-845-11 1-216-073-91 1-216-837-11
METAL CHIP RES-CHIP METAL CHIP RES-CHIP METAL CHIP
10K 10K 100K 10K 22K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R324 R325 R327 R328 R329
1-216-295-91 1-216-295-91 1-216-825-11 1-216-825-11 1-216-833-11
SHORT CHIP SHORT CHIP METAL CHIP METAL CHIP METAL CHIP
0 0 2.2K 2.2K 10K
5% 5% 5%
1/10W 1/10W 1/10W
R111
1-216-073-91
RES-CHIP
10K
5%
1/10W
R330
1-216-833-11
METAL CHIP
10K
5%
1/10W
74
MEX-BT5100 MAIN Ref. No.
Part No.
Description
R331 R332 R334 R335
1-216-825-11 1-216-805-11 1-216-845-11 1-216-864-11
METAL CHIP METAL CHIP METAL CHIP SHORT CHIP
2.2K 47 100K 0
Remark
R336 R337 R338 R339 R401
1-216-864-11 1-216-845-11 1-216-845-11 1-216-845-11 1-216-839-11
SHORT CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
R405 R406
1-216-843-11 1-216-809-11
R407 R409 R410
5% 5% 5%
1/10W 1/10W 1/10W
0 100K 100K 100K 33K
5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W
METAL CHIP METAL CHIP
68K 100
5% 5%
1-218-883-11 1-218-891-11 1-216-821-11
METAL CHIP METAL CHIP METAL CHIP
33K 68K 1K
0.5% 0.5% 5%
1/10W 1/10W (AEP, UK) 1/10W 1/10W 1/10W
R411
1-216-833-11
METAL CHIP
10K
5%
R412 R413
1-216-864-11 1-216-821-11
SHORT CHIP METAL CHIP
0 (AEP, UK) 1K 5%
R414 R415
1-216-864-11 1-216-801-11
SHORT CHIP METAL CHIP
0 (AEP, UK) 22 5%
R416 R417
1-216-864-11 1-216-845-11
SHORT CHIP METAL CHIP
0 (AEP, UK) 100K 5%
R418
1-216-797-11
METAL CHIP
10
5%
R419
1-216-797-11
METAL CHIP
10
5%
R501
1-216-833-11
METAL CHIP
10K
5%
R503
1-216-845-11
METAL CHIP
100K
5%
R504
1-216-845-11
METAL CHIP
100K
R507
1-216-845-11
METAL CHIP
100K
R508
1-216-845-11
METAL CHIP
100K
R509
1-216-845-11
METAL CHIP
100K
1/10W (AEP, UK) 1/10W (AEP, UK) 1/10W (AEP, UK) 1/10W (AEP, UK) 1/10W (AEP, UK) 1/10W (AEP, UK) 1/10W
Ref. No.
Part No.
Description
Remark
R534 R535 R536 R540 R541
1-216-845-11 1-216-821-11 1-216-853-11 1-216-809-11 1-216-809-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
100K 1K 470K 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R542 R544 R545 R546 R547
1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
100 100 100 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R548 R549 R550 R551 R552
1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
100 100 100 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R553 R554 R555 R556 R557
1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
100 100 100 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R558 R559 R560 R563 R569
1-216-809-11 1-216-809-11 1-216-809-11 1-216-864-11 1-216-864-11
METAL CHIP METAL CHIP METAL CHIP SHORT CHIP SHORT CHIP
100 100 100 0 0
5% 5% 5%
1/10W 1/10W 1/10W
R572 R573 R575 R590
1-216-809-11 1-216-845-11 1-216-845-11 1-216-845-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP
100 100K 100K 100K
5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W
R591
1-216-845-11
METAL CHIP
100K
5%
1/10W
(E) 1/10W (AEP, UK) 5% 1/10W (US, CND) 5% 1/10W (US, CND, E) 5% 1/10W (AEP, UK, E) 5% 1/10W (US, CND, AEP, UK)
R510 R511 R512 R513 R514
1-216-845-11 1-216-833-11 1-216-833-11 1-216-825-11 1-216-825-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
100K 10K 10K 2.2K 2.2K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R515 R516 R517 R518 R519
1-216-809-11 1-216-809-11 1-218-871-11 1-218-871-11 1-216-845-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
100 100 10K 10K 100K
5% 5% 0.5% 0.5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R520 R521 R523
1-216-864-11 1-216-841-11 1-216-843-11
SHORT CHIP METAL CHIP METAL CHIP
0 47K 68K
5% 5%
R525 R526
1-216-845-11 1-216-845-11
METAL CHIP METAL CHIP
100K 100K
5% 5%
1/10W 1/10W (AEP, UK) 1/10W 1/10W
R527 R528 R529 R530
1-216-845-11 1-216-845-11 1-216-845-11 1-216-839-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP
100K 100K 100K 33K
5% 5% 5% 5%
R533
1-216-841-11
METAL CHIP
47K
5%
1/10W 1/10W 1/10W 1/10W (AEP, UK) 1/10W
(E) R601 R602 R603 R604 R605
1-216-833-11 1-216-837-11 1-218-875-11 1-218-871-11 1-218-879-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 22K 15K 10K 22K
5% 5% 0.5% 0.5% 0.5%
1/10W 1/10W 1/10W 1/10W 1/10W
R606 R607 R608 R609 R610
1-218-883-11 1-218-880-11 1-218-879-11 1-218-847-11 1-218-873-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
33K 24K 22K 1K 12K
0.5% 0.5% 0.5% 0.5% 0.5%
1/10W 1/10W 1/10W 1/10W 1/10W
R611 R612 R613 R615 R616
1-218-867-11 1-216-819-11 1-216-853-11 1-216-847-11 1-216-851-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
6.8K 680 470K 150K 330K
0.5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R621 R622 R627 R628 R629
1-216-841-11 1-216-843-11 1-216-829-11 1-216-829-11 1-216-821-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
47K 68K 4.7K 4.7K 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R630 R631 R632 R633 R634
1-216-833-11 1-216-845-11 1-216-833-11 1-216-845-11 1-216-841-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 100K 10K 100K 47K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R635 R636 R637
1-216-845-11 1-216-841-11 1-216-821-11
METAL CHIP METAL CHIP METAL CHIP
100K 47K 1K
5% 5% 5%
1/10W 1/10W 1/10W
75
MEX-BT5100 MAIN Ref. No.
SERVO Part No.
Description
R638 R639
1-216-797-11 1-216-797-11
METAL CHIP METAL CHIP
10 10
5% 5%
1/10W 1/10W
Remark
R640 R641 R642 R643 R644
1-216-797-11 1-216-835-11 1-216-801-11 1-216-845-11 1-216-845-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10 15K 22 100K 100K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R645 R646 R648 R649 R650
1-216-845-11 1-216-845-11 1-216-809-11 1-216-809-11 1-216-845-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
100K 100K 100 100 100K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R651 R652 R653 R654 R655
1-216-833-11 1-216-797-11 1-216-821-11 1-216-789-11 1-216-789-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
10K 10 1K 2.2 2.2
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R656 R657 R658 R659 R660
1-216-789-11 1-216-789-11 1-216-845-11 1-216-817-11 1-216-821-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
2.2 2.2 100K 470 1K
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R661 R662 R663 R664 R665
1-216-821-11 1-216-823-11 1-216-817-11 1-216-809-11 1-216-809-11
METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP
1K 1.5K 470 100 100
5% 5% 5% 5% 5%
1/10W 1/10W 1/10W 1/10W 1/10W
R666
1-216-809-11
METAL CHIP
100
5%
1/10W
< SWITCH > S503 S601
1-571-478-11 1-692-431-21
SWITCH, SLIDE (FREQUENCY SELECT) (E) SWITCH, TACTILE (RESET) < THERMISTOR >
TH101 TH351 TH601
1-803-615-21 1-801-792-21 1-803-615-21
THERMISTOR, POSITIVE THERMISTOR, POSITIVE THERMISTOR, POSITIVE < TUNER UNIT >
TUX401
A-3220-961-B
TUX-032//Q (TUNER UNIT) < VIBRATOR >
X401 1-813-173-11 VIBRATOR, CRYSTAL (8.664MHz) (AEP, UK) X501 1-813-524-21 VIBRATOR, CERAMIC (18.432MHz) X502 1-813-202-11 VIBRATOR, CRYSTAL (32.768kHz) ************************************************************* A-1132-412-A
SERVO BOARD, COMPLETE **********************
Ref. No.
Part No.
Description
C18
1-125-777-11
CERAMIC CHIP 0.1uF
10%
10V
C19 C20 C22 C23 C24
1-125-777-11 1-164-677-11 1-164-677-11 1-125-777-11 1-125-777-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.033uF 0.033uF 0.1uF 0.1uF
10% 10% 10% 10% 10%
10V 16V 16V 10V 10V
C25 C26 C29 C30 C31
1-125-777-11 1-162-966-11 1-162-968-11 1-162-968-11 1-125-777-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.0022uF 0.0047uF 0.0047uF 0.1uF
10% 10% 10% 10% 10%
10V 50V 50V 50V 10V
C32 C33 C36 C39 C40
1-125-777-11 1-125-777-11 1-125-777-11 1-126-208-21 1-126-395-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP
0.1uF 0.1uF 0.1uF 47uF 22uF
10% 10% 10% 20% 20%
10V 10V 10V 4V 16V
C41 C42 C43 C44 C45
1-125-777-11 1-125-777-11 1-100-567-81 1-125-777-11 1-125-777-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 0.01uF 0.1uF 0.1uF
10% 10% 10% 10% 10%
10V 10V 25V 10V 10V
C46 C47 C48 C49 C50
1-162-923-11 1-164-245-11 1-100-567-81 1-125-777-11 1-100-567-81
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
47PF 0.015uF 0.01uF 0.1uF 0.01uF
5% 10% 10% 10% 10%
50V 25V 25V 10V 25V
C51 C52 C53 C54 C55
1-125-777-11 1-125-777-11 1-125-777-11 1-100-567-81 1-125-777-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 0.1uF 0.1uF 0.01uF 0.1uF
10% 10% 10% 10% 10%
10V 10V 10V 25V 10V
C56 C58 C60 C62 C66
1-164-245-11 1-125-777-11 1-162-964-11 1-125-777-11 1-100-567-81
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.015uF 0.1uF 0.001uF 0.1uF 0.01uF
10% 10% 10% 10% 10%
25V 10V 50V 10V 25V
C67 C68 C69 C70 C71
1-100-567-81 1-100-567-81 1-100-567-81 1-125-777-11 1-125-777-11
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.01uF 0.01uF 0.01uF 0.1uF 0.1uF
10% 10% 10% 10% 10%
25V 25V 25V 10V 10V
C72 C80 C132 C133
1-125-777-11 1-125-837-91 1-125-837-91 1-125-837-91
CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 1uF 1uF 1uF
10% 10% 10% 10%
10V 6.3V 6.3V 6.3V
< CONNECTOR > CN1 CN2
1-691-380-61 1-817-275-21
< CAPACITOR >
CONNECTOR, FFC/FPC (ZIF) 16P CONNECTOR, BOARD TO BOARD 28P < JUMPER RESISTOR >
C7 C10 C11 C12 C13
1-125-777-11 1-126-208-21 1-125-777-11 1-125-777-11 1-100-567-81
CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
0.1uF 47uF 0.1uF 0.1uF 0.01uF
10% 20% 10% 10% 10%
10V 4V 10V 10V 25V
FB2 FB3 FB4
C14 C15 C16 C17
1-104-609-11 1-125-777-11 1-162-964-11 1-125-777-11
ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP
100uF 0.1uF 0.001uF 0.1uF
20% 10% 10% 10%
4V 10V 50V 10V
IC1 IC2 IC3 IC6
76
Remark
1-216-864-11 1-216-864-11 1-216-864-11
SHORT CHIP SHORT CHIP SHORT CHIP
0 0 0
< IC > 6-707-327-01 6-708-729-01 6-807-233-01 6-708-728-01
IC IC IC IC
BA5968FP-E2 TC94A70FG-002 MB90486BPMC-G-177E1 BH15LB1WG
MEX-BT5100 SERVO Ref. No.
Part No.
Description
Remark
< TRANSISTOR > Q2 Q3 Q21
6-551-120-01 8-729-928-90 8-729-904-87
TRANSISTOR TRANSISTOR TRANSISTOR
2SA2119K DTC114EE 2SB1197K-R
< RESISTOR/CAPACITOR >
Ref. No.
SUB
Part No.
Description
R65 R67
1-218-977-11 1-218-941-81
RES-CHIP RES-CHIP
100K 100
5% 5%
1/16W 1/16W
Remark
R68 R69 R70 R71 R72
1-218-941-81 1-218-941-81 1-218-965-11 1-218-973-11 1-218-973-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
100 100 10K 47K 47K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R1 R2 R5 R6 R7
1-218-965-11 1-218-977-11 1-218-969-11 1-218-969-11 1-218-990-81
RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP
10K 100K 22K 22K 0
5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W
R73 R74 R75 R77 R78
1-218-973-11 1-218-941-81 1-218-941-81 1-218-973-11 1-218-941-81
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
47K 100 100 47K 100
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R8 R9 R10 R11 R12
1-218-965-11 1-218-965-11 1-218-990-81 1-218-941-81 1-218-969-11
RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP
10K 10K 0 100 22K
5% 5%
1/16W 1/16W
5% 5%
1/16W 1/16W
R79 R80 R81 R82 R83
1-218-941-81 1-218-941-81 1-218-941-81 1-218-941-81 1-218-977-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
100 100 100 100 100K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R13 R14 R15 R16 R17
1-218-969-11 1-218-929-11 1-218-929-11 1-218-953-11 1-218-990-81
RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP
22K 10 10 1K 0
5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W
R84 R85 R86 R87 R96
1-218-941-81 1-218-977-11 1-218-941-81 1-218-977-11 1-218-941-81
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
100 100K 100 100K 100
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R18 R19 R20 R21 R22
1-218-941-81 1-218-935-11 1-162-961-11 1-218-941-81 1-218-977-11
RES-CHIP RES-CHIP CERAMIC CHIP RES-CHIP RES-CHIP
100 33 330PF 100 100K
5% 5% 10% 5% 5%
1/16W 1/16W 50V 1/16W 1/16W
R97 R98 R132 R133 R141
1-220-200-81 1-218-971-11 1-218-969-11 1-218-953-11 1-216-864-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP
30K 33K 22K 1K 0
5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W
R23 R24 R25 R26 R27
1-218-977-11 1-218-977-11 1-218-977-11 1-218-977-11 1-218-977-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
100K 100K 100K 100K 100K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R144 R147
1-216-864-11 1-216-864-11
SHORT CHIP SHORT CHIP
0 0
R28 R29 R30 R31 R32
1-218-945-11 1-218-989-11 1-218-989-11 1-218-989-11 1-218-947-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
220 1M 1M 1M 330
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R33 R34 R35 R36 R37
1-218-990-81 1-216-864-11 1-162-961-11 1-218-947-11 1-218-947-11
SHORT CHIP SHORT CHIP CERAMIC CHIP RES-CHIP RES-CHIP
0 0 330PF 330 330
10% 5% 5%
50V 1/16W 1/16W
R38 R39 R40 R41 R42
1-218-941-81 1-218-941-81 1-218-941-81 1-218-941-81 1-218-977-11
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
100 100 100 100 100K
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R43 R44 R52 R53 R54
1-218-961-11 1-218-977-11 1-218-962-11 1-218-979-11 1-218-990-81
RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP
4.7K 100K 5.6K 150K 0
5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W
R55 R57 R58 R60 R61
1-218-973-11 1-218-967-11 1-218-969-11 1-218-941-81 1-218-941-81
RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP
47K 15K 22K 100 100
5% 5% 5% 5% 5%
1/16W 1/16W 1/16W 1/16W 1/16W
R62 R63 R64
1-218-941-81 1-218-977-11 1-218-977-11
RES-CHIP RES-CHIP RES-CHIP
100 100K 100K
5% 5% 5%
1/16W 1/16W 1/16W
< SWITCH > SW1
1-529-565-61
SWITCH, PUSH (1 KEY) (DOWN) < VIBRATOR >
X1 1-813-678-11 OSCILLATOR, CERAMIC (CHIP TYPE) (12MHz) X2 1-795-561-21 VIBRATOR, CERAMIC (16.9344MHz) ************************************************************* SUB BOARD ********** < CONNECTOR > CN902
1-818-142-11
SOCKET, CONNECTOR 20P < DIODE >
D902 D903
6-501-743-01 6-501-743-01
DIODE MAZ8068GMLS0 DIODE MAZ8068GMLS0 < LED >
LED902 LED903
6-500-204-01 6-500-895-01
LED CL-190UB2-X-T (KEY ILLUMINATION) LED CL-270UB2-X-TS (DISC SLOT ILLUMINATON) < RESISTOR >
R903
1-216-809-11
METAL CHIP
100
5%
1/10W
< SWITCH > S901 1-786-653-21 SWITCH, TACTILE (Z) *************************************************************
77
MEX-BT5100 SUB
SENSOR
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
SENSOR BOARD ************** < SWITCH > SW2 1-529-566-61 SWITCH, PUSH (1 KEY) (SELF) SW3 1-529-566-61 SWITCH, PUSH (1 KEY) (DISC IN) ************************************************************ MISCELLANEOUS ************** 2 11
1-831-502-11 1-831-837-11
11
1-833-972-11
14 16
1-833-121-11 1-834-678-11
18
1-790-355-54
0 153 ENC702 F901 FL701
8-820-207-12 1-479-832-21 1-532-877-11 1-519-842-21
CABLE, FLEXIBLE FLAT (22 CORE) CORD (WITH CONNECTOR) (ISO) (POWER) (AEP, UK) CONNECTION CODE FOR AUTOMOBILE (POWER) (US, CND, E) CABLE, FLEXIBLE FLAT (40 CORE) LEAD WIRE WITH CONNECTOR CORD (WITH CONNECTOR) (RCA) (SUB OUT (MONO)) OPTICAL PICK-UP (KSS1000E/C-RP1) ENCODER, ROTARY (SWITCH) FUSE (BLADE TYPE) (AUTO FUSE) (10A/32V) VACUUM FLUORESCENT DISPLAYS
501 502 503
X-2179-431-1 1-465-459-31 1-831-837-11
503
1-833-972-11
505
3-246-471-01
FRAME ASSY, FITTING ADAPTER, ANTENNA (AEP, UK) CORD (WITH CONNECTOR) (ISO) (POWER) (AEP, UK) CONNECTION CODE FOR AUTOMOBILE (POWER) (US, CND, E) KEY (FRAME)
506 507 508 509 510
2-668-798-01 X-3381-154-1 X-3382-926-1 3-349-410-11 3-934-325-01
COLLAR SCREW ASSY (BS4), FITTING (E) SCREW ASSY (BS), FITTING (AEP, UK) BUSHING (AEP, UK, E) SCREW, +K (5X8) TAPPING (US, CND, E)
501
FITTING FRAME ASSY ×1
3-276-519-21 3-276-519-31 3-276-520-11 3-276-520-21 3-276-520-31
MANUAL, INSTALL INSTRUCTION (ENGLISH, FRENCH, SPANISH) (US, CND) MANUAL, INSTALL INSTRUCTION (ENGLISH, SPANISH, PERSIAN) (E) MANUAL, INSTRUCTION (ENGLISH, GERMAN, FRENCH, ITALIAN, DUTCH) (AEP, UK) MANUAL, INSTRUCTION (ENGLISH, FRENCH, SPANISH) (US, CND) MANUAL, INSTRUCTION (ENGLISH, SPANISH, PERSIAN) (E)
QUICK GUIDE (BLUETOOTH) (Enjoy using Bluetooth™ wireless technology) (ENGLISH, GERMAN, FRENCH) (AEP, UK) 3-276-521-21 QUICK GUIDE (BLUETOOTH) (Enjoy using Bluetooth™ wireless technology) (ITALIAN, DUTCH) (AEP, UK) 3-276-521-31 QUICK GUIDE (BLUETOOTH) (Enjoy using Bluetooth™ wireless technology) (ENGLISH, FRENCH, SPANISH) (US, CND) 3-276-521-41 QUICK GUIDE (BLUETOOTH) (Enjoy using Bluetooth™ wireless technology) (ENGLISH, SPANISH, PERSIAN) (E) ************************************************************
ANTENNA ADAPTOR ×1
(AEP, UK)
(US, CND, E)
503
503
POWER CORD (ISO) ×1
ACCESSORIES ************ REMOTE COMMANDER (RM-X301) (US, CND) REMOTE COMMANDER (RM-X302) (AEP, UK) REMOTE COMMANDER (RM-X303) (E) LID, BATTERY (for Remote commander) MANUAL, INSTALL INSTRUCTION (ENGLISH, GERMAN, FRENCH, ITALIAN, DUTCH) (AEP, UK)
(AEP, UK)
502
M902 A-3372-447-A MOTOR ASSY, SL (SLED) M903 A-1206-596-B LE MOTOR ASSY (A) (LOADING) MIC500 1-542-689-11 MICROPHONE SW4 1-786-339-11 SWITCH (M) (LIMIT) *************************************************************
1-474-006-11 1-474-006-21 1-474-006-31 2-548-730-01 3-276-519-11
Remark
PARTS FOR INSTALLATION AND CONNECTIONS *************************************
POWER CORD ×1
505
506
COLLAR ×1
KEY (FRAME) ×2
507
(E)
509
FITTING SCREW ×1
508
510
+K5 × 8 ×4
BUSHING ×1
FITTING SCREW ASSY (BS4) ×1
(AEP, UK)
(US, CND)
509
510
3-276-521-11
78
FITTING SCREW ×1
BUSHING ×1
FITTING SCREW ASSY (BS) ×1
+K5 × 8 ×4
MEX-BT5100
MEMO
79
MEX-BT5100
REVISION HISTORY Checking the version allows you to jump to the revised page. Also, clicking the version at the top of the revised page allows you to jump to the next revised page. Ver.
Date
1.0
2007.10
Description of Revision New
