Transcript
All the selected batteries are developed for cyclical applications ( = charging & discharging) Open lead-acid batteries
Maintenance free batteries
Semi-traction batteries Open lead-acid batteries, flat plates, ca. 600 cycles (DIN).
AGM batteries Valve regulated lead acid batteries, Absorbed Glass Mat Technology (=AGM). Can be used in any position. For lighter cyclical applications, ca. 300 cycles.
Deep cycle batteries Open lead-acid batteries, flat plates, USA Traction Monobloc, ca. 1200 cycles (DIN) - 750 (SAE).
GEL batteries For durable cyclical use. Only in straight position. Longest battery life, highest cycles and the best for cyclical use. Ca. 550 cycles.
Traction batteries Open lead-acid batteries, pos. tubular plates, ca. 1250 cycles (DIN).
Attention ! The battery life depends on the use / discharge of the battery (DOD = Depth of Discharge), the way of charging etc. It’s recommended to recharge the battery as fast as possible after use, the life span indicated is the average with an 80%-discharge. Open lead-acid: max. 2,65V/cell, charging current = Ah/5h : 6 AGM: 2,35V/cell - 2,40V/cell max., charging current = Ah/5h : 6 GEL: 2,35V/cell - 2,40V/cell max., charging current = Ah/5h : 6
MFAC - AGM BATTERIES This range features advanced AGM technology with absorbed electrolyte. Designed for reliable storage solutions for renewable energy solutions. Ref.
V
C100
C10
Length
Width
Height
Layout
Weight
MFAC65
12V
MFAC80
12V
65Ah
54Ah
242
175
190
C
18,2
80Ah
65 Ah
278
175
190
C
21,3
MFAC90
12V
90Ah
83Ah
353
175
190
C
27,1
MFAC100
12V
100Ah
85Ah
345
175
230
C
28,4
MFAC160
12V
140Ah
125Ah
513
189
223
D
40,1
MFAC190
12V
170Ah
145Ah
513
223
223
D
47,3
MFAC220
12V
195Ah
165Ah
518
274
242
D
56,7
MFAC230
12V
220Ah
190Ah
518
274
242
D
60,3
Made in
Europe
KEY FEATURES: • extremely long service life • more than 500 cycles at 75% D.O.D. • more than 1000 cycles according to IEC 61427 (PVES Application) • absolutely maintenance free • high reliability and safe handling • 100% non spillable, perfect for indoor usage • Reliable for renewable energy and back up solutions
CHARGING PARAMETERS: • Charge with constant current » Current limit : 10-20% from C10 capacity rate • Charge with constant voltage » Voltage limit : 14.1 - 15.0V per block • Float Charge Voltage (cycling) » Float voltage : 13.62V per block @ 20° • Temperature Correction Factor » 0.018V per block / °C
-20
-10
0
10
20
30
40
50
OPERATING TEMPERATURE DEG. C
BATTERY SUPPLIES.BE
25
