Transcript
M
MATERIAL TESTING Melt Flow MFI-400 Series, Melt Flow Indexers
This type of Melt Flow Indexer is a new & affordable tabletop instrument that tests the melt mass-flow rate (MFR) & melt volume-flow rate (MVR) of a wide range of thermoplastic raw materials, in the form of granules, strips of film etc. This test method is particularly useful for quality control tests on thermoplastics. MVR will be found particularly useful when comparing materials of different filler content & when comparing filled with unfilled thermoplastics. The MFR can be determined from MVR measurements provided the melt density at the test temperature & pressure is known. The tester is far superior to all national and international standard of Melt Flow Rates requirements, including IS01133, ASTM D1238 & GBIT 3682 method A & B. High Accuracy The built-in microprocessor maintains temperature control to within ± 0.5°C, with rapid ram-up to the set point. Extruded material is automatically cut off by the built-in scraper mechanism at preset intervals, controllable to ± 0.1 second. Ease to operate! Testing Melt Flow Rate has never been so economical or easy to do! The tester is supplied completely with the accessories & weights necessary for maintenance & operation. Nothing else to buy-just plug it in & start a test. Technical Parameters: Operating temperature: 120°C-450°C ● Temperature control accuracy: ≤0.5°C ● Temperature display resolution: 0.1°C ● Temperature rising time: <30 min ● Power supply: 220V/50Hz or 110V/60Hz.
MFI-400
It allows for testing melt mass-flow rate (MFR) according to the standards IS01133, ASTM 01238 method A. The clear multi-line LCD display & tactile-feedback membrane keypad allows fast, accurate inputting of test parameters and providing continuous display of settings during testing.
MFI-400B
It allows for testing the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) according to the standards ASTM 01238, IS01133, with the additional function of printing the test result by a built-in micro-printer.
MFI-400C Series
MFI-400C Software: Two languages are provided: English and Chinese. MFI-400C Software has the functions of setting parameters, constant temperature control, cutting sample, calibration, setting test time, displaying test datum & result, calculating melt density, as well as checking & printing test datum. Password verify is necessary for some main operations in case of mishandle.
MFI-400C
MFR and MVR, Loading the Weight Automatically It allows for testing the melt mass-flow rate (MFR) and melt volume-flow rate (MVR), Melt density test according to the standards ASTM 01238, IS01133. The clear multi-line Touch screen allows fast, accurate input of test parameters and providing continuous display of setting during testing, printing the test result by a micro-printer. With the additional function of loading the Weight automatically.
398
MFI-400C1/2
MFR and MVR, Loading the Weight Manually It allows for testing the melt mass-flow rate (MFR) & melt volume-flow rate (MVR), Melt density test according to the standards ASTM 01238, IS01133. The clear multi-line Touch screen allow fast , accurate input of test parameters and providing continuous display of setting during testing, with the additional function of printing the test result by a micro-printer. MFR and MVR, Loading the Weight Manually It allows for testing the melt mass-flow rate (MFR) according to the standards ASTM 01238, IS01133. The clear multi-line Touch screen allows fast , accurate input of test parameters and providing continuous display of setting during testing. MRC.5.11.13
