Mfr-1300 Desoldering System

Transcript

NEW MFR-1300 Desoldering System Key Features The MFR-1300 Series Desoldering and Rework Systems are the next generation of standalone desoldering equipment from OK International. The new power supply features an internal pump providing 21" Hg of vacuum suction force combined with Smartheat® technology that makes through-hole desoldering easy and keeps your products safe from board damage. The new hand-piece has been designed to be used in two configurations. The MFR-H5-DS can be used as a pencil or as a a pistol style by simply adding a clip on grip supplied with the hand-piece. Self-contained powerful pump 2 in 1 ergonomic and flexible hand-piece: pencil or pistol Collection chamber with 40% increased capacity* Innovative collection chamber for quick and easy change Dual switchable output Powered by Smartheat® Technology Compatible with previous MFR Desolder range * compared to the previous MFR-HDS Desolder Hand-piece Solder collection capabilities have been increased by 40% from previous MFR desolder systems and the innovative replaceable collection chamber enables reduced downtime and quicker changeover. Pencil www.okinternational.com/oki Pistol MFR-1300 Series Desoldering Systems SYSTEM CONFIGURATIONS Part No Description MFR-1350 MFR-1351 Dual Switchable Output Desolder System with Internal Pump Dual Switchable Output Solder / Desolder System with Internal Pump MFR-PS1300 Power Supply MFR-H5-DS Desoldering Hand-piece MFR-H1-SC Soldering Hand-piece MFR-WSDSU Universal Desolder Workstand WS1 Universal Solder Workstand MFR-1350 MFR-1350 Desolder System MFR-1351 Desolder & Solder System MFR-H5-DS - Pencil configuration Grip supplied with MFR-H5-DS Grip easily clip-on to pencil MFR-H5-DS - Pistol configuration MFR-DC10 - Collection Chamber Fast collection chamber replacement MFR-1351 SYSTEM COMPONENTS Part No. MFR-PS1300 MFR-H5-DS MFR-H1-SC MFR-WSDSU WS1 Description Switched Dual Output Power Supply with Internal Pump Desolder Hand-piece, with selectable grip, and cord Solder Cartridge Hand-piece, with cord Universal Workstand for Desolder Hand-piece Universal Workstand for Solder Hand-piece ACCESSORIES Part No. Description MFR-DC10 MFR-DC100 MFR-PG MFR-HDCA MFR-WSDSCB MFR-H5-DS-C AC-SK1 AC-VP AC-VL AC-TC-P AC-Y10 AC-BP AC-VPF Disposable Collection Chamber for MFR-H5-DS (pack of 10) Disposable Collection Chamber for MFR-H5-DS (pack of 100) Replacement Pistol grip for MFR-H5-DS Hand-piece Coil assembly for MFR Desolder Hand-piece - Replaceable consumable part Desolder workstand cradle Desolder hand-piece and universal cradle assembly Seal Kit Collection Chamber (pack of 2) Vacuum Port ESD Air Hose Desoldering Tip Cleaner (pack of 12) Yellow sponge for Workstands (pack of 10) Brass pad for Workstands (pack of 10) Vacuum Port Filter (pack of 5) CARTRIDGES Hand-piece MFR-H5-DS MFR-H1-SC Cartridges DxP Series Desoldering Cartridges SxP and RxP Series Soldering and Rework Cartridges TECHNICAL SPECIFICATIONS Input Line Voltage Input Line Frequency Power Consumption Output Power Output Frequency Idle Tip temperature stability Ambient Operating Temperature Maximum Enclosure Temperature Noise level Vacuum suction force Power Cord (3-wire) Desolder Hand-piece cable length Solder Hand-piece cable length Hand piece connector Tip to ground Potential Tip to ground resistance Surface Resistivity Approvals Dimensions (approx.) W x D x H Workstand dimensions MFR-1350/51 100-240 VAC 50/60Hz 110 Watts max. (Power Supply MFR-PS1300) 60 Watts Max (RF SmartHeat® Power) 450 KHz +/- 34°F (1.1°C) in still air 50 - 104°F (10 - 40°C) 131°F (55°C) < 55 dB 21" Hg at Vacuum pump at sea level (0.7 bar) 72" (183cm) 60" (152 cm), burn proof, ESD safe 48" (122 cm), burn proof, ESD safe 8 pin power connector <2mV <2 Ohms 105 – 109 Ohms cTUVus, CE 7" x 8" x 6" (170mm x 200mm x 152.5mm) 4" x 8" x 4" (100mm x 200mm x 100mm) For further information on the MFR-1300 go to: www.okinternational.com MFR-HDCA Replacement coil assembly Dual Switchable Output