Microelectronic Power Ic Series Pvt312pbf Features General Description

Transcript

Series PVT312PbF Microelectronic Power IC HEXFET® Power MOSFET Photovoltaic Relay Single-Pole, Normally-Open, 0-250V, 190mA AC/DC Features General Description The PVT312 Photovoltaic Relay is a single-pole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes International Rectifier’s proprietary HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. This SSR is specifically designed for telecom applications. PVT312L employs an active currentlimiting circuitry enabling it to withstand current surge transients. PVT312 Relays are packaged in a 6-pin, molded DIP package with either thru-hole or surface mount ( “gull-wing”) terminals. It is available in standard plastic shipping tubes or on tape-and-reel. Please refer to the Part Identification information opposite. Applications „ On/Off Hook switch „ Dial-Out relay „ Ring injection relay „ Ground start „ General switching ƒ ƒ ƒ ƒ ƒ ƒ ƒ ƒ HEXFET Power MOSFET output Bounce-free operation 4,000 VRMS I/O isolation Load current limiting Linear AC/DC operation Solid-State Reliability UL recognized and BABT certified; ESD Tolerance: 4000V Human Body Model 500V Machine Model Part Identification PVT312LPbF PVT312LSPbF PVT312LS-TPbF PVT312PbF PVT312SPbF PVT312S-TPbF current limit, thru-hole current limit, surface-mount current limit, surface-mount, tape and reel no current limit, thru-hole no current limit, surface-mount no current limit, surface-mount tape and reel (HEXFET is the registered trademark for International Rectifier Power MOSFETs) 1 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 18, 2015 Series PVT312PbF Electrical Specifications (-40°C ≤ TA ≤ +85°C unless otherwise specified) INPUT CHARACTERISTICS Part Numbers PVT312L Minimum Control Current (see figures 1 and 2) Maximum Control Current for Off-State Resistance @ TA=+25°C Control Current Range (Caution: current limit input LED, see figure 6) Maximum Reverse Voltage OUTPUT CHARACTERISTICS Operating Voltage Range Maximum Load Current @ TA=+40°C, 5mA Control (see figures 1 and 2) A Connection B Connection C Connection Maximum On-State Resistance @TA=+25°C for 50mA pulsed load 5mA Control (see figure4) A Connection B Connection C Connection Maximum Off-State Leakage @TA=+25°C, ±250V (see figure 5) Current Limit @TA=+25°C, 5mA Control Connection: Minimum Maximum Maximum Turn-On Time @TA=+25°C (see figure 7) for 50mA, 100 VDC load, 5mA Control Maximum Turn-Off Time @TA=+25°C (See Fig. 6) For 50mA, 100 VDC load, 5mA Control Maximum Output Capacitance @ 50VDC 2.0 0.4 2.0 to 25 mA mA mA 6.0 V PVT312L PVT312 0 to ±250 V(DC or AC peak) 170 190 300 190 210 320 mA (AC or DC) mA (DC) mA (DC) 15 8 4.25 10 5.5 3 Ω Ω Ω µA 1.0 A 190 300 GENERAL CHARACTERISTICS Minimum Dielectric Strength, Input-Output Minimum Insulation Resistance, Input-Output @TA=+25°C, 50%RH, 100VDC Maximum Capacitance, Input-Output Maximum Pin Soldering Temperature (10 seconds maximum) Ambient Temperature Range: Operating Storage Units PVT312 C 330 560 n/a n/a 3.0 mA mA ms 0.5 ms 50 pF ALL MODELS 4000 1012 1.0 +260 -40 to +85 -40 to +100 VRMS Ω pF °C °C International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. 2 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 18, 2015 Series PVT312PbF Connection Diagrams 200 250 "A" Connection "A" Connection PVT312L 175 PVT312 200 150 I LED= 5 mA I LED =5 mA 125 150 100 2 mA 100 2 mA 75 50 50 25 0 0 0 0 20 40 60 80 100 Ambient Temperature (deg. C) Figure 1. Typical Current Derating Curves 250 "A" Connection 20 40 60 80 100 Ambient Temperature (deg. C) Figure 2. Typical Current Derating Curves PVT312 200 PVT312L 2.5 150 5 mA Control I D = 10 mA 100 "A" Connection 2.0 50 -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.5 1.0 1.5 2.0 2.5 3.0 1.5 -50 -100 5 mA Control @25C, pulsed -150 1.0 0.5 -200 -250 Voltage Drop (Vdd) Figure 3. Linearity Characteristics 3 www.irf.com © 2015 International Rectifier 0 -50 -25 0 25 50 75 100 125 Ambient Temperature (deg. C) Figure 4. Typical Normalized On-Resistance Submit Datasheet Feedback May 18, 2015 Series PVT312PbF 100 20 30 CAUTION: provide current limiting so that 25 mA maximum steadystate control current rating is not exceeded 16 10 12 3.0 8 1.0 4 0.3 0 0.1 -35 -15 5 25 45 65 85 105 0 0.5 1.0 1.5 2.0 LED Forward Voltage Drop (Volts DC) Ambient Temperature (deg. C) Figure 6. Input Characteristics (Current Controlled) Figure 5. Typical Normalized Off-State Leakage 20 10 ILED 90% 5 toff 3 0.05 t dly 0.1 0.2 0.5 1.0 ID 10% ton 2.0 t dly t off ton 5.0 Delay Time (milliseconds) Figure 8. Delay Time Definitions Figure 7. Typical Delay Times 160 "A" Connection 120 80 40 0 0 10 20 30 40 50 Vdd, Drain to Drain Voltage (V) Figure 9. Typical Output Capacitance 4 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 18, 2015 Series PVT312PbF Case Outlines 01-2008 01 01-2009 01 Note: For the most current drawing please refer to IR website at: http://www.irf.com/package/ 5 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 18, 2015 Series PVT312PbF Qualification information† Industrial †† (per JEDEC JESD47I guidelines) Qualification level Moisture Sensitivity Level PVT312LPbF PVT312PbF PVT312LSPbF PVT312LS-TPbF PVT312SPbF PVT312S-TPbF RoHS compliant N/A MSL4 (per JEDEC J-STD-020E & JEDEC J-STD-033C †† ) Yes † Qualification standards can be found at International Rectifier’s web site: http://www.irf.com/product-info/reliability †† Applicable version of JEDEC standard at the time of product release Revision History Date 5/18/2015 Comments • Added Qualification Information Table on page 6 • Updated data sheet with new IR corporate template IR WORLD HEADQUARTERS: 101 N. Sepulveda Blvd., El Segundo, California 90245, USA Data and specifications subject to change without notice To contact International Rectifier, please visit http://www.irf.com/whoto-call/ 6 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback May 18, 2015