Transcript
Multiplexers & Gage Interfaces Featuring MicroRidge Technology
The following units are compatible with Zontec’s Synergy 100, Synergy 1000, Synergy 2000 and Synergy 3000 Software:
GageWay SM for RS-232 (Part # GW-SM-R-xx) Connects a single Mitutoyo gage to an RS-232 serial port; powered by the serial port; 9pin serial cable built-in. Standard cable length: 72”. Custom cable lengths also available. Price: $109.00
GageWay SM for USB (Part # GW-SM-U-xx) Connects a single Mitutoyo gage to a USB port; powered by the USB port; USB cable builtin. To the Zontec SPC applications, the GageWay SM for USB appears as a device connected to a serial port. Standard cable length: 72”. Custom cable lengths also available. Price: $109.00
GageWay3 Plus (Part # GW3-PLUS) Connects two digital/RS-232 inputs to an RS-232 serial port..
Price: $450.00
GageWay5 Plus (Part # GW5-PLUS) Connects four digital/RS-232 inputs to an RS-232 serial port. Includes RS-232 expansion port for fifth RS-232 input or for chaining additional interfaces. Price: $690.00
GageWayMx8 Interface (Part # GW-MX8-MIT) Connects eight Mitutoyo gages to an RS-232 serial port or USB port..
Price: $895.00
Serial to USB Cable (Part # USB-1SP-6) Six-foot serial to USB interface cable.
Price: $35.00
Wireless Interface System Components MobileCollect Transmitters Supports equipment from manufacturers such as Mitutoyo, Ono Sokki, Federal Maxum, CDI, Starrett, Fowler, Brown & Sharpe, Mahr Federal, LMI, etc. Note: You must also order the appropriate gage cable. Please specify the gage manufacturer, gage model (or series) and cable length up to 72”.
Digital Mobile Module (Part # MC-MM-D) Captures measurements from most digital and RS-232 handheld gages such as calipers, micrometers, digital indicators, etc. Battery-powered (battery included). Price: $229.00 (Shown with Opto cable)
Command Mobile Module (Part # MC-MM-DC)
(Shown with Opto cable)
Functions similar to the Digital Mobile Module with additional ability to send a command from base unit to initiate a gage reading. Battery-powered (battery included). Price: $319.00
RS-232 Mobile Module (Part # MC-MM-R) Supports RS-232 gages not supported by the Digital Mobile Module or the Command Mobile Module. Battery-powered (battery included). Price: $349.00 (Shown with Opto cable)
RS-232 Remote 300 (Part # MC-RS232-REMOTE300) For RS-232 serial devices such as gage interfaces or scales in a non-mobile setup that you want to connect to the wireless system. Powered by external AC adapter (included). Price: $495.00
MobileCollect Base Units MobileCollect USB Base (Part # MC-BASE-USB-72) Receives measurements from mobile modules and remotes; powered by USB port on your PC or laptop. Includes setup program on CD and 72” USB cable. Price: $375.00
MobileCollect RS-232 Base 300 (Part # MC-RS232-BASE300) Receives measurements from mobile modules and remotes. Connects to RS-232 port on a PC. Powered by external AC adapter (included). Price: $495.00
1389 Kemper Meadow Drive Cincinnati, Ohio 45240 513/648-9695 Fax 513/648-0805
866/955-0088
[email protected] www.zontec-spc.com © 2010 Zontec Inc.
