Transcript
MIL-STD HYPER-CONVERGED SERVER GERMANE HyperG MODEL GRS-3500G 4 NODE RUGGED SERVER
Key features of the GRS-3500G Rugged Server • 4 Nodes with each node containing dual CPUs • Dual Intel Xeon® E5-2600 V4 CPUs • 24 2.5” hot-swappable SSDs • 12G SAS/SATA RAID 0/1/5/10
The HyperG, model GRS-3500G is the first hyper-converged server that • 1TB DDR4 (max) per node is fully military-grade rugged in a 3U chassis that is only 24.5 inches deep. • 3U chassis 24.5 inches deep This high-performance server contains 4 nodes with each node containing • 3 year warranty 2 Intel E5-2600 V4 CPUs, up to 1TB DDR4 of memory. The server supports up to • 2 - 10 Gb Ethernet ports 24 hot-swappable disk drives which are divided into 6 drives per node. • Rear I/O access
This powerful turnkey system enables rapid field deployment of a data center in a box. The HyperG design is fully operational at +50˚ C and is proven to continue working even during repeated 30Gs shock events.
GERMANE SYSTEMS A leading manufacturer of ruggedized COTS based open architecture computer solutions that designs custom solutions for your requirements with rapid in house prototyping. Germane provides configuration and End of Life (EOL) product management with complete environmental and structural testing capabilities.
DESIGN
TEST
BUILD
SUPPORT
HyperG GRS-3500G RUGGED 3U HCI SERVER Computer Module and CPUs • 4 Intel® HNS2600TP24 Compute Modules • Dual Intel Xeon E5-2600 V4 CPUs per node • Two 1Gb/s or 10Gb/s with +SFP Ethernet ports per node • 12Gb SAS or 6Gb SAS available • 1 PCIe X16 slot per node • Optional QSFP FDR InfiniBand ConnectX-3 I/O module Memory System • DDR4 SDRAM memory (2400, 2133, 1866, MT/s) • Maximum 1TB per node with ECC registered DIMMs • 8GB,16GB, 32GB and 64GB DIMMS supported Chassis • Dimensions: 5.25” (h) x 17.25“ (w) x 24.5” (d) • Weight: 70 pounds (varies by configuration) • Cooling: Fan forced air (rear vent) • Rack mount with optional rail system Disk Drive Storage (front) • 24 SSDs 2.5“ SSD (9.5mm) • Hot-swappable • 6 drives assigned per node • LED status indicator for each drive Power Supply • 1600W or 2130W 120 /240 VAC power • Hot Swap power • 80%+ Silver efficiency
Front Panel • Dual drive trays with status LEDs • Power on switch and indicator • Node status indicators • Mounting ears and handles Rear Panel • 4 Compute Nodes - each node hot-swappable • Power Supply modules - hot-swappable • Power input connectors • 2 Ethernet ports per node (SFP+ for 10GE or RJ45 for 1GE) • 1 IPMI connectors RJ45 per node • Optional - InfiniBand connector per node Environmental Specifications • Operating Temperature: -20°C to +50°C** • Non-Operating Temperature: -40°C to +80°C • Operating Altitude: 10,000 ASL/Non-Operating 40,000 ASL • Humidity: RH 95% non-condensing @+35C ** Temperature specifications are configuration dependent. Please contact Germane for specific configurations. Lower and higher temperatures may be supported upon request.
MIL-STD Specifications • MIL-STD 810F/G • Shock: MIL-STD 901D Grade A • Vibration: MIL-STD 167-1 • Noise Levels: MIL-STD 1474D and 740-2
Germane Systems, LC designs all products to meet or exceed the specifications listed. Due to the multiple combinations of CPUs, main boards, memory peripheral cards, HHD and SSDs available in our modular COTS configurations it is not practical to test every combination. Please contact your Germane Systems representative for qualification testing specific to the desired configuration for your application.
BUILT IN THE USA
ISO 9001:2008 CERTIFIED COMPANY
3680 Centerview Dr., Chantilly, VA 20151 Phone 703.502.8890
[email protected] www.germane.com KB-021 Rev.1 6-02-2011
WOMAN OWNED SMALL BUSINESS
