Mimioclassroom User Guide

Transcript

MimioClassroom User Guide For Mac mimio.com © 2013 Mimio. All rights reserved. Revised 20.11.2014. No part of this document or the software may be reproduced or transmitted in any form or by any means or translated into another language without the prior written consent of Mimio. Mimio, MimioClassroom, MimioTeach, MimioCapture, MimioVote, MimioView, MimioHub, MimioPad, MimioMobile, MimioProjector, and MimioStudio are registered marks in the United States and other countries. All other trademarks are the property of their respective holders. Apple, iPad, iPhone, iPod touch and App Store are trademarks of Apple Inc., registered in the U.S. and other countries. Android and Google Play are trademarks of Google Inc. Contents About MimioClassroom 1 MimioStudio 1 MimioTeach 1 Mimio Interactive 2 MimioCapture 2 Mimio Capture Kit 2 MimioVote 2 MimioView 2 MimioPad (Model Number: ICD07) 2 MimioPad (Model Number: RCK-M01) 2 MimioMobile 3 MimioProjector 3 Minimum System Requirements 3 Using this Guide 3 MimioStudio 7 About MimioStudio 7 About MimioStudio Notebook 7 About MimioStudio Tools 7 About MimioStudio Gallery 9 Getting Started with MimioStudio 9 Accessing MimioStudio Notebook 9 Accessing MimioStudio Tools 10 Accessing MimioStudio Gallery 10 Using MimioStudio Notebook 10 Working with Pages 11 Creating an Activity 14 Creating an Activity - Step 1: Define 14 Creating an Activity - Step 2: Select 14 Creating an Activity - Step 3: Refine 15 Creating an Activity - Step 4: Review 16 Working with an Activity 17 Writing an Objective 17 Attaching Files Using MimioStudio Tools Creating Objects 18 18 18 iii Manipulating Objects 21 Adding Actions to Objects 25 Adding Animations to Objects 26 Using MimioStudio Gallery Importing Gallery Items into a Notebook 28 Customizing the Content of the Gallery 28 Exporting a Gallery Folder to a Gallery File 29 Working with Saved Annotation Snapshots 30 Viewing Screen Annotation Snapshots 30 Renaming an Annotation Snapshot 30 Adding Keywords to an Annotation Snapshot 30 Searching for an Annotation Snapshot 31 Importing an Annotation Snapshot 31 Pasting an Annotation Snapshot Into Another Application 31 Printing Annotation Snapshots 31 Deleting Annotation Snapshots 31 Delivering Interactive Notebook Lessons and Presentations 32 Using Fullscreen View 32 Navigating Through a Presentation 32 Working with Multimedia Objects 32 MimioTeach 35 What's Included 35 About MimioTeach 35 Status Lights About MimioStudio Tools Getting Started 36 37 39 Setting Up the MimioTeach Stylus 39 Setting Up the MimioTeach Bar 39 Setting Up Interactive Mode 41 Projecting Your Desktop 41 Calibrating Interactive Mode 42 Using MimioTeach 42 Using the MimioTeach Stylus 43 Focusing Attention Using the Reveal and Spotlight Tools 43 Using the Reveal Tool 43 Using the Spotlight Tool 44 Marking Up the Display Using Screen Annotations Enabling Screen Annotation Mode iv 27 45 45 Annotating the Screen Using MimioStudio Tools 46 Clearing All Annotations from the Display 48 Inserting Text Into an Application Using MimioStudio Text Tools 49 Using the On-Screen Keyboard 49 Using Writing Pad 49 Using Gesture Recognition 50 Using the Web Browser and Calculator Tools 51 Recording Desktop Actions and Audio in Interactive Mode 51 Caring for MimioTeach 51 Cleaning MimioTeach 51 Inserting the Batteries 51 Attaching MimioTeach to a Non-Magnetic Whiteboard 52 Mimio Interactive 55 What's Included 55 About Mimio Interactive 55 Status Lights 56 About Mimio Wireless 57 Status Lights 58 About MimioStudio Tools Getting Started 59 61 Setting Up the Mimio InteractiveMouse 61 Setting Up the Mimio Interactive Bar 61 Setting Up Mimio Wireless 62 Setting Up Interactive Mode 64 Projecting Your Desktop 64 Calibrating Interactive Mode 65 Using Mimio Interactive 66 Using the Mimio Interactive Mouse 66 Focusing Attention Using the Reveal and Spotlight Tools 66 Using the Reveal Tool 66 Using the Spotlight Tool 67 Marking Up the Display Using Screen Annotations 68 Enabling Screen Annotation Mode 68 Annotating the Screen Using MimioStudio Tools 69 Clearing All Annotations from the Display 71 Inserting Text Into an Application Using MimioStudio Text Tools 72 Using the On-Screen Keyboard 72 Using Writing Pad 72 v Using Gesture Recognition Using the Web Browser and Calculator Tools 74 Recording Desktop Actions and Audio in Interactive Mode 74 Caring for Mimio Interactive 74 Cleaning Mimio Interactive 74 Inserting the Batteries 74 Attaching Mimio Interactive Permanently 75 MimioCapture (Model Number: ICD10) 77 What's Included 77 About MimioCapture 78 Status Lights 78 About MimioStudio Notebook Getting Started 78 79 Setting Up the MimioCapture Charging Tray 79 Setting Up the Pen Holder 79 Setting Up the MimioCapture Pens 80 Setting Up the MimioCapture Eraser 81 Charging the Pens and Eraser 82 Setting Up MimioStudio Notebook for Capture 82 Setting the Whiteboard Size 82 Starting Ink Capture Mode 83 Using MimioCapture 83 Capturing Digital Ink 83 Writing and Drawing Digital Ink 83 Adding and Copying Notebook Pages 84 Caring for MimioCapture 85 Cleaning MimioCapture 85 Attaching the Pen Holder to a Non-Magnetic Whiteboard 85 MimioCapture (Model Number: ICD04) 89 What's Included 89 About MimioCapture 90 Status Lights 90 About MimioStudio Notebook Getting Started vi 73 90 91 Setting Up the MimioCapture Tray 91 Setting Up the MimioCapture Pens 92 Setting Up the MimioCapture Eraser 93 Charging the Pens and Eraser 94 Setting Up MimioStudio Notebook for Capture 94 Setting the Whiteboard Size 94 Starting Ink Capture Mode 95 Using MimioCapture 95 Capturing Digital Ink 95 Writing and Drawing Digital Ink 95 Adding, Copying, and Printing Notebook Pages 96 Using the MimioCapture Bar to Add, Copy, and Print Notebook Pages 96 Using the MimioTeach Bar to Add and Copy Notebook Pages 97 Caring for MimioCapture 97 Cleaning MimioCapture 97 Attaching MimioCapture to a Non-Magnetic Whiteboard 98 Mimio Capture Kit 99 What's Included 99 About Mimio Capture Kit 99 About MimioStudio Notebook Getting Started 100 100 Setting Up the Mimio Capture Kit Pens 100 Setting Up the Mimio Capture Kit Eraser 102 Setting Up MimioStudio Notebook for Capture 103 Setting the Whiteboard Size 103 Starting Ink Capture Mode 103 Using Mimio Capture Kit 104 Capturing Digital Ink 104 Writing and Drawing Digital Ink 104 Adding, Copying, and Printing Notebook Pages 105 Downloading Digital Ink 106 Caring for Mimio Capture Kit 106 Cleaning the Mimio Capture Kit 106 Attaching the Mimio Capture Kit 107 MimioVote 109 What's Included 109 About MimioVote 109 About the MimioVote Station 109 About the MimioVote Units 110 About the Software 111 About MimioStudio Notebook 111 About the Vote Toolbar 112 vii About MimioStudio Quick Vote 112 About MimioStudio Gradebook 112 Getting Started Setting Up MimioVote 114 Adding a Second MimioVote System 115 Using MimioStudio Gradebook 116 Setting Up the Gradebook 116 Creating a Class 116 Adding Students 116 Importing a List of Students 117 Adding Activities 117 Modifying the Gradebook 118 Editing Student Information 118 Removing a Student 118 Editing Activities 118 Editing Questions 119 Editing Student Responses 119 Grading Essay Questions 119 Generating Reports 120 Exporting a List of Students 120 Archiving Classes 120 Exporting Results 121 Opening Archived Classes 121 Creating MimioVote Activities 121 Creating Activities in Notebook 122 Modifying Question Objects 123 Importing Standard Assessments 123 Printing Activities 123 Using the MimioVote Unit 124 Answering Questions 124 Answering Questions for Teacher-Led Activities 124 Answering Questions for Self-Paced Activities 124 Requesting Help viii 114 125 Using the Vote Toolbar 125 Taking Attendance 125 Using the Timer 125 Conducting Activities 125 Conducting a Teacher-Led Activity 126 Asking Questions Using Quick Vote 126 Conducting a Self-Paced Activity 127 Viewing Question Results 127 Viewing Activity Results 127 Viewing a List of Students that Have Not Responded 128 Viewing Requests for Help Caring For MimioVote 128 128 Cleaning MimioVote 128 Storing MimioVote 129 MimioView 340H 131 What's Included 131 About MimioView 132 Status lights About MimioStudio View Getting Started 132 133 133 Installing MimioView 133 Opening the View Window 134 Closing the View Window 134 Using MimioView Displaying an Image 134 134 Displaying a Document 134 Displaying an Object 135 Displaying a Microscope Slide 135 Freezing the Image 136 Adjusting the Image 136 Rotating the Image 136 Zooming the Image 136 Adjusting the Settings 137 Annotating an Image Clearing All Annotations from the Image 137 138 Transferring an Image 138 Recording Video 139 Turning Off the Lamps 139 Caring For MimioView 139 Cleaning MimioView 139 Attaching MimioView Permanently 139 MimioView Safety Notices 140 MimioPad (Model Number: ICD07) 141 What's Included 141 ix About MimioPad 142 Status Light 142 About the Feature Indicators Getting Started 143 Charging the MimioPad 143 Configuring MimioPad 143 Replacing the MimioPad Battery 144 Using MimioPad 144 Using the Shortcut Keys 144 Using MimioStudio Collaborate 144 Maximising a Workspace 145 Sharing Control 145 Pairing an Additional MimioPad with the MimioHub 145 Replacing the Lanyard with the Pen Tip 146 MimioPad (Model Number: RCK-M01) 147 What's Included 147 About MimioPad 148 About the Feature Indicators 149 Getting Started 149 Setting Up the MimioPad 149 Charging the Battery 150 Setting Up the Pen 150 Configuring MimioPad 150 Using MimioPad 151 Using the Shortcut Keys 151 Changing the Pen Tip 151 Pairing an Additional MimioPad with the Wireless Receiver 152 MimioMobile 153 Getting Started 153 Installing the Software 153 Connecting Mobile Devices 154 Connecting a Teacher Mobile Device 154 Connecting Student Mobile Devices 154 Using History Connect 155 Using Manual Connect 156 Using MimioMobile x 142 156 Using the Shortcut Keys 156 Using Class Manager 157 Using MimioStudio Collaborate 157 Maximising a Workspace 158 Using the Collaborate Toolbar 158 Sharing Control 158 Using MimioStudio Vote 158 MimioProjector 159 What's Included 159 About MimioProjector 160 About the Control Panel 162 About the Remote Control 163 About the Connection Ports 165 Getting Started Connecting the Projector 165 166 Connecting to a Computer 167 Connecting to a Video Source 168 Setting Up the Remote Control 169 Turning on the power 170 Turning Off the Power 171 Status Lights 172 Adjusting the Projected Image 173 Resizing the Projected Image 173 Focusing the Projected Image 173 Changing the Projector Settings 173 Navigating the Projector Menu 174 Adjusting the 3D Settings 177 3D 177 3D Invert 177 3D Format 177 1080p @24 177 Adjusting the Interactive Settings 178 Adjusting the Options 178 Logo 178 Logo Capture 179 Auto Source 179 Input 179 Auto Power Off 179 Lamp Setting 179 Dynamic Black 180 xi High Altitude 180 Filters Remind 180 Information 181 Adjusting the Picture 181 Colour Mode 181 Wall Colour 181 Brightness 181 Contrast 181 Sharpness 181 Saturation 182 Hue 182 Gamma 182 Colour Temperature 182 Colour Space 182 Adjusting the Screen Aspect Ratio 182 Phase 183 Clock 183 Horizontal Position 183 Vertical Position 183 Digital Zoom 183 Vertical Keystone 183 Ceiling Mount 183 Adjusting the General Settings 184 Language 184 Menu Location 184 Closed Caption 184 VGA OUT (Standby) 184 Auto Screen (12V Out) 184 Test Pattern 185 Security 185 Reset 185 Adjusting the Volume 186 Mute 186 Volume 186 Microphone Volume 186 Caring for MimioProjector xii 182 186 Replacing the Remote Control Battery 186 Replacing the Lamp 187 Cleaning the Dust Filters Getting Help General Troubleshooting 188 189 189 Projector stops responding to all controls 189 Lamp burns out or makes a popping sound 190 Image Troubleshooting 190 No image is displayed 190 A partial, scrolling, or incorrect image is displayed 190 The notebook computer display is not displaying an image 190 Image is unstable or flickering 191 Image has vertical flickering bar 191 Image is out of focus 191 Image is stretched when displaying 16:9 DVD image 191 Image is too small or too large 191 Image is displayed with slanted sides 191 Image is reversed 191 3D Troubleshooting 191 A blurry double image is displayed 191 Two images are displayed side-by-side 192 Image not displayed in 3D 192 Sound Troubleshooting 192 Remote Control Troubleshooting 192 Compatibility Modes 193 VGA Analogue 193 PC Signal 193 Extended Wide Timing 194 Component Signal 195 HDMI Digital 196 PC Signal 196 Extended Wide Timing 197 Video Signal 198 HDMI 1.4a Mandatory 3D Timing - Video Signal 198 Technical and Environmental Information Usage Notice 199 199 Warnings 199 Precautions 199 Regulation & Safety Notices 200 FCC Notice 200 Operating Conditions 201 xiii Projector Mount Safety Notices MimioStudio Recorder 203 Using MimioStudio Recorder 203 Recording a Presentation 203 Customizing MimioStudio 205 Adjusting the Classroom Devices Preferences 205 Adjusting the Ink Capture Preferences 205 Adjusting the Interactive Preferences 208 General Preferences 208 Actions and Commands Preferences 208 Adjusting the Language Preferences 208 Adjusting MimioStudio Notebook Preferences 209 General Preferences 209 Ink Capture Preferences 210 Adjusting the Proxy Server Preferences Proxy Server Preferences xiv 201 210 210 MimioStudioAdjusting MimioStudio Recorder Preferences 211 Adjusting the Tablet Devices Preferences 211 Adjusting the Mobile Settings 211 Adjusting the Vote Preferences 211 Getting Help 213 Updating the Software 213 Troubleshooting 213 Contacting Mimio 213 Technical and Environmental Information 215 Environmental Information 215 Safety Precautions for Lithium-Ion Rechargeable Batteries 215 Documentation Feedback 216 Chapter 1 About MimioClassroom MimioClassroom is a suite of tools for capturing, creating and presenting information. The following MimioClassroom components are described in this User Guide: n MimioStudio n MimioTeach n Mimio Interactive n MimioCapture n Mimio Capture Kit n MimioVote n MimioView n MimioPad (Model Number: ICD07) n MimioPad (Model Number: RCK-M01) n MimioMobile n MimioProjector MimioStudio MimioStudio software includes all of the tools you need to get the most from your MimioClassroom devices. You can also use the MimioStudio software without a MimioClassroom device to prepare presentations and manipulate previously created content. MimioStudio Notebook provides a multi-page workspace for creating lessons and presentations. MimioStudio Notebook is very similar in use to other word processing or presentation software applications. MimioStudio Notebook provides multiple authoring and editing tools for creating almost any type of content. You can use Notebook with MimioStudio Tools to create a variety of objects including text boxes, freehand writing and drawing, lines, arrows and many basic shapes. Images can be imported into a Notebook, both as objects and as background images. MimioTeach Using MimioTeach with a projector, you can deliver lessons and presentations directly from your whiteboard. In MimioStudio Interactive mode you control the movement of the cursor on your screen with the MimioTeach stylus, much like you would with a mouse at your computer. 1 About MimioClassroom Mimio Interactive Using Mimio Interactive with a projector, you can deliver lessons and presentations directly from your whiteboard. Using MimioStudio Interactive mode, you control the movement of the cursor on your screen with the Mimio Interactive mouse, much like you would with a mouse at your computer. MimioCapture MimioCapture is used with a MimioTeach-enabled whiteboard to record notes and drawings from your whiteboard. Using MimioStudio Ink Capture mode, you make notes and drawings on your whiteboard using the MimioCapture pens. Your notes are automatically captured in a MimioStudio Notebook. Mimio Capture Kit Mimio Capture Kit is used with a Mimio Interactive-enabled whiteboard to record notes and drawings from your whiteboard. Using MimioStudio Ink Capture mode, you make notes and drawings on your whiteboard using the Mimio Capture Kit pens. Your notes are automatically captured in a MimioStudio Notebook. MimioVote MimioVote is a wireless, interactive, student response system. Using MimioVote, you can easily and quickly gather student responses. This quick feedback from students allows you to make sure each student is keeping up and adjust your lesson accordingly. MimioView MimioView works seamlessly with MimioStudio software to display documents, threedimensional objects and microscope slides for your entire class to view. You can use MimioView to display still images or live video. MimioPad (Model Number: ICD07) MimioPad is a 2.4 GHz wireless pad. To configure MimioPad for use, install the MimioStudio software and plug the MimioPad into your computer using the included USB cable or connect the MimioPad to your computer wirelessly using the MimioHub. Once connected, you can use the MimioPad from anywhere in the room to interact with your computer. No additional configuration is required. MimioPad (Model Number: RCK-M01) MimioPad is a 2.4 GHz wireless pad. To configure MimioPad for use, install the MimioStudio software and plug the wireless receiver into your computer. Once connected, you can use the MimioPad from anywhere in the room to interact with your computer. No additional configuration is required. 2 MimioMobile MimioMobile Using the MimioMobile app on a mobile device, teachers and students can collaborate using interactive whiteboard lessons. The MimioMobile app can be used alone with MimioStudio software or in conjunction with MimioTeach interactive system and other MimioClassroom products. The MimioMobile app is available for the following devices: n iPad® 2 or later, running iOS 5 or later n iPhone® 4 or later, running iOS 5 or later n iPod touch® 4th generation or later, running iOS 5 or later n Mobile device running Android™ 3.0 (Honeycomb) or later MimioMobile can be used by both students and teachers. Teachers can pass desktop control to any student mobile device and initiate group activities so that all students with a mobile device can simultaneously participate in an activity. Students can also use a mobile device with MimioMobile instead of a MimioVote unit. Mobile devices with the MimioMobile app can be used in conjunction with the new MimioPad tablet. MimioProjector Using MimioProjector and a conventional whiteboard, you can bring interactive teaching into your classroom. MimioProjector easily connects to your computer and can be used as an interactive projector along with the interactive pens or alone as a non-interactive, conventional projector. Minimum System Requirements The minimum system requirements for MimioStudio are: n Intel® 1 GHz processor n Mac OS X 10.6 or later n 512 MB RAM minimum (1 GB RAM recommended) n 250 MB free disk space (English), 350 MB free disk space (International) n Internet connection to download and activate the software n Available USB port (required to use a MimioClassroom device) Using this Guide This User Guide includes information for using the different MimioClassroom components. Depending on the types of MimioClassroom devices you have, some sections of this User Guide may not apply to you. The following table provides a summary of the contents. 3 About MimioClassroom 4 User Guide Chapter Description About MimioClassroom This chapter gives an overview of the MimioClassroom products, including MimioStudio software, MimioTeach, MimioCapture, MimioVote and MimioView. MimioStudio This chapter describes how to work with MimioStudio Notebook, Tools and Gallery to create and deliver lessons and other presentations. MimioTeach This chapter describes how to set up and use MimioTeach with your whiteboard and a projector. This chapter also describes how to use MimioStudio in Interactive mode. Mimio Interactive This chapter describes how to set up and use Mimio Interactive with your whiteboard and a projector. This chapter also describes how to use MimioStudio in Interactive mode. MimioCapture (Model Number: ICD10) This chapter describes how to set up and use MimioCapture model number ICD10. Included in this chapter are instructions for capturing notes and drawings from a MimioTeach-enabled whiteboard as digital ink using MimioCapture. MimioCapture (Model Number: ICD04) This chapter describes how to set up and use MimioCapture model number ICD04. Included in this chapter are instructions for capturing notes and drawings from a MimioTeach-enabled whiteboard as digital ink using MimioCapture. Mimio Capture Kit This chapter describes how to set up and use Mimio Capture Kit. Included in this chapter are instructions for capturing notes and drawings from a Mimio Interactive-enabled whiteboard as digital ink using Mimio Capture Kit. MimioVote This chapter describes how to set up and use MimioVote. Included in this chapter are instructions for creating and conducting MimioVote activities, as well as information about setting up and using MimioStudio Gradebook to save student grades and information. MimioView This chapter describes how to set up and use MimioView. Included in this chapter are instructions for displaying and annotating images in the MimioStudio View window. MimioPad Model Number: ICD07 This chapter describes how to set up and use MimioPad model number ICD07. MimioPad Model Number: RCK-M01 This chapter describes how to set up and use MimioPad model number RCK-M01. MimioMobile This chapter describes how to set up and use MimioMobile. Using this Guide User Guide Chapter Description MimioProjector This chapter describes how to set up and use MimioProjector. Using MimioStudio Recorder This chapter describes how to use MimioStudio Recorder to create movies (with audio) of your presentations. Customizing MimioStudio This chapter describes how to customize the features of the MimioStudio software and the MimioClassroom devices. Getting Help This chapter gives troubleshooting information for some common problems, describes how to check for and install MimioStudio software updates and how to contact Technical Support. Technical and Environmental Information This chapter contains technical, certification and safety information for the MimioClassroom products. 5 This page intentionally left blank for double-sided printing. 6 Chapter 2 MimioStudio MimioStudio software includes all of the tools you need to get the most from your MimioClassroom devices. You can also use the MimioStudio software without a MimioClassroom device to prepare presentations and manipulate previously created content. About MimioStudio The following are the three main MimioStudio software applications that are used to create and present information. n MimioStudio Notebook n MimioStudio Tools n MimioStudio Gallery For information about other MimioStudio applications, see the chapters of this User Guide that describe the MimioClassroom devices that you have. MimioStudio Notebook provides a multi-page workspace for creating lessons and presentations. MimioStudio Notebook is very similar in use to other word processing or presentation software applications. MimioStudio Notebook provides multiple authoring and editing tools for creating almost any type of content. You can use Notebook with MimioStudio Tools to create a variety of objects including text boxes, freehand writing and drawing, lines, arrows and many basic shapes. Images can be imported into a Notebook, both as objects and as background images. About MimioStudio Notebook You can create and present information with MimioStudio Notebook. Using Notebook is very similar to using other word processing or presentation software. Content created in Notebook can be saved as Mimio INK files or a variety of other file formats including HTML, JPEG, PNG, GIF, BMP, TIF, JP2, PICT, PSD, SGI, IWB and PDF. You can use Tab View to view a list of files that are attached to a Notebook or to view a thumbnail of each page in a Notebook. About MimioStudio Tools MimioStudio Tools provides a comprehensive set of interactive tools and resources to create and present information. MimioStudio Tools is used to modify MimioStudio Notebook pages and to make screen annotations on the whiteboard. The following table describes the major components of MimioStudio Tools. 7 MimioStudio Selection tool Zoom Pen Brush Text Highlighter Line Arrow End Arrow Start Arrow Both Rectangle Ellipse Triangle Right-Angled Triangle Five-Pointed Star Hexagon Pentagon Shape Recognition Eraser Insert file Screen clipping Colour picker More colours Object Fill Outline and Fill colour Thickness slider Colour palette Solid Line Dash Line Square Dot Line Transparency Gallery Applications (see below) Right-click Interactive Mouse Screen Annotation From the Applications tool, you can access the following: Reveal Spotlight Text Tools Class Manager Control  Quick Collaborate Quick Vote Recorder View Calculator Web Browser MimioStudio Tools has two views: a fully expanded view, for easy access to all features, and a compressed view, which takes up less space on the screen. To compress and expand MimioStudio Tools 8 Getting Started with MimioStudio Double-click  at the top of the MimioStudio Tools toolbar. About MimioStudio Gallery MimioStudio Gallery contains elements that can be used to create your lessons and presentations, such as images, templates, movies and previously created lessons. MimioStudio Gallery also contains Screen Annotation snapshots and Collaborate pages. You can customize the Gallery by adding your own elements. MimioStudio Gallery consists of the following four main folders: n Screen Annotations - contains all saved Screen Annotation snapshots. n Imported Content Packs - contains any imported content that you have not yet added to the Gallery folder. n Questions and Results - contains a variety of objects for use with MimioVote. n Gallery - contains a number of different folders used to categorise items such as Geography, Mathematics and so on. n Collaborative Sessions - contains all saved Collaborate pages. The Gallery folder and each of the Gallery subfolders can contain five different types of objects: n Images - Images include pictures and graphics. n Templates - Templates include backgrounds and predefined page layouts. n Multimedia - Multimedia objects include movies, animation and sound. n Questions and Results - Questions and Results include objects for creating and displaying the results of MimioVote activities. This section of the Gallery does not appear until you move objects from the Questions and Results folder to the Gallery folder or a Gallery subfolder. n Lessons - Lessons include lessons created using MimioStudio Notebook and imported documents. You can create your own lessons or import lessons created by someone else. Getting Started with MimioStudio After installing MimioStudio, MimioStudio Notebook and MimioStudio Tools open on your desktop. You can activate MimioStudio software on your computer by connecting a Mimio hardware device or by entering an activation code. You can access many of the features in MimioStudio in several ways; from the menu bar, the MimioStudio Tools buttons and the right-click menus. The available features change depending on what you are doing in the software. Be sure to explore the right-click menu options as you work with MimioStudio. Accessing MimioStudio Notebook Several ways to access MimioStudio Notebook are shown in the following table. 9 MimioStudio To start from the Do this Dock Click  in the Dock. Menu bar Click , and then choose Notebook. Accessing MimioStudio Tools Several ways to access MimioStudio Tools are shown in the following table. To start from the Do this Dock Click  in the Dock. Menu bar Click , and then choose Tools. Do one of the following: MimioStudio Notebook n n Click  on the status bar. Choose MimioStudio Tools from the Tools menu. MimioTeach Press the Launch button, , on the MimioTeach bar and then click Tools in the Launch window. Mimio Interactive Press the New page button, , on the Mimio Interactive bar. Accessing MimioStudio Gallery Several ways to access MimioStudio Gallery are shown in the following table. To start from Do this MimioStudio Tools Click MimioStudio Notebook Do one of the following: n n  on the MimioStudio Tools toolbar. Click  on the status bar. Choose Gallery from the Insert menu. Using MimioStudio Notebook You can create and present information with MimioStudio Notebook. Using Notebook is very similar to using other word processing or presentation software. Content created in Notebook can be saved as Mimio INK files or a variety of other file formats including HTML, JPEG, PNG, GIF, BMP, TIF, JP2, PICT, PSD, SGI, IWB and PDF. You can use Tab View to view a list of files that are attached to a Notebook or to view a thumbnail of each page in a Notebook. To open an existing Notebook 10 Using MimioStudio Notebook 1. Start MimioStudio Notebook and click . 2. From the Open dialog box, navigate to and select the file to open and click Open. To save a Notebook 1. Click the Save button, . 2. From the Save As dialog box, enter a name for your file in the Save As box. 3. Choose the desired format from the File Format list. 4. Click Save. When saving in a format other than INK, the Page Selection dialog box appears. 5. From the Page Selection dialog box, do the following: l Select the pages to save under Page Selection. l Choose a size for the images from the Size list. 6. Click OK. Working with Pages Each lesson or presentation created in MimioStudio Notebook consists of a series of pages. Pages can be viewed, presented, and edited in the main Notebook window or in Full Screen view. You can view a thumbnail of each page in a Notebook using the Thumbnails pane in the Tab View. You can insert new pages, import pages from another Notebook, delete pages and reorder pages. You can also change the size of a page, change the background of a page and add transition effects between pages in your Notebook. To insert a new page Do one of the following: l Click the New Page button, . l (Capture mode only) Press the New Page button,  , on your MimioCapture tray. To select a page 1. In the Tab View, click to display the Thumbnails pane. 2. Do one of the following: l To select multiple pages, press Command and select each page. l To select multiple pages that are close to each other, drag a selection rectangle over the pages to select. l To select a range of pages, select the first page and then press SHIFT and select the last page. l To select all pages, choose Select All from the Edit menu. To insert a duplicate of an existing page 1. In the Tab View, click and then select the page to duplicate. 2. Do one of the following: l Choose Duplicate Page from the Insert menu. l (Capture mode only) Press the Copy Page button, , on your MimioCapture tray. To delete a page 11 MimioStudio 1. In the Tab View, click , and then select the page to delete. 2. Click the Delete button, . To import a page from another Notebook 1. In the Tab View of the source Notebook, click  and then select the page to import. 2. Click the Copy button, . 3. Select the location in the target Notebook to insert the page. 4. Click the Paste button, . You can also import pages by dragging the pages from the source Notebook to the target Notebook. To insert the desktop as a new page 1. From MimioStudio Tools, click the Screen Clipping button, The desktop is displayed with a transparent mask. . 2. Click . The desktop is inserted as a new page in the Notebook. To change the page size 1. Choose Page Setup from the File menu. The Page Setup dialog box appears. 2. Do one of the following: l From the Page Size list, choose any of the available display or device sizes. l From the Page Size list, choose Custom and then enter the desired valued into the Width and Height boxes. 3. From the Apply To list, choose one of the following: l Current Page to apply the page size to the current page only. This option is not available if more than one page is selected in the Tab View. l Selected Pages to apply the page size to the selected pages. This option is only available if more than one page is selected in the Tab View. l Whole Document to apply the page size to all of the pages in the Notebook. 4. (Optional) Do one of the following: l To apply the page size to all new pages, select the All new pages check box. This option is only available if no MimioTeach device is connected. l To apply the page size to all new pages and the currently connected device, select the The connected device check box. This option is only available if a MimioTeach device is connected. 5. Click OK to apply your changes. To change the background colour of a page 1. Choose Background from the Insert menu. 2. From the Background dialog box, click Colour. 3. From the Colour dialog box, select a colour and then click OK. 4. From the Apply To list, select the pages to apply the background colour to. 12 Using MimioStudio Notebook 5. To apply the background colour to all new pages, select the All new pages check box. 6. Click OK to apply your changes. To change the background image of a page 1. Choose Background from the Insert menu. 2. From the Background dialog box, click Image. 3. From the Open dialog box, navigate to and select the image file that you want to use as your background. 4. Click Open. The image is displayed in the Preview area. You can also import an image from another application or from the MimioStudio Gallery to use as a background. To do this, select the image and drag to the Preview area. 5. Select the display mode for the new background from the Mode list. Mode Result Place The image is placed in the top left corner of the page and is not resized. Stretch The image is resized to fill the entire page. Tile The image is tiled repeatedly to fill the entire page and is not resized. Centre The image is placed in the centre of the page and is not resized. 6. From the Apply To list, select the pages to apply the background to. 7. To apply the background to all new pages, select the All new pages check box. 8. Click OK to apply your changes. To add a transition effect between pages 1. Choose Page Transition from the Insert menu. The Page Transition dialog box appears. 2. From the Transitions list, select the transition to apply. 3. From the Apply To list, select the pages to apply the transition to. 4. To apply the transition to all new pages, select the All new pages check box. 5. Click OK. To sort pages 1. In the Tab View, click 2. Select the pages to sort. to display the Thumbnails pane. 3. Drag the selected pages to the desired location. To print a page 1. In the Tab View, click to display the Thumbnails pane. 2. Select the pages to print. 3. Click the Print button, . The Print dialog box appears. 4. Click Print. 13 MimioStudio To print the current page in Ink Capture mode, press the Print Page button, MimioCapture tray. , on your Creating an Activity MimioStudio Notebook includes a wizard that you can use to quickly create and insert an activity into your Notebook. The wizard guides you through the following steps to create and insert an activity: n Step 1: Define - Define the subject, grade level and template for the activity. n Step 2: Select - Select the topic and categories for the activity and when to show students the correct answers. n Step 3: Refine - Refine the items available in the activity. You can also choose to display items as images or text. n Step 4: Review - Review the activity and enter a student-focused objective. To start the wizard 1. Open a new or existing Notebook. 2. Choose New Activity from the Insert menu. The wizard starts. 3. Follow the instructions in the wizard. 4. When finished, click Finish to insert the activity as a new page in the MimioStudio Notebook. Creating an Activity - Step 1: Define When you create an activity using the wizard, you define the subject, grade level and template for the activity. To define the activity 1. Under Subject, select a subject for the activity. 2. Under Grade Level, select the grade level of the students who will participate in the activity. 3. Under Template, select a template for the activity. 4. Click Next. Next, you select the topic and categories for the activity. Creating an Activity - Step 2: Select Once you have completed Step 1, you must select the topic and categories for the activity. The topic and categories available depend on the subject and grade level you selected. The number of categories that you need to choose depends on the template you selected. You also select when to reveal the correct answers to your students. To select the topic, categories and when to show answers 1. Select a topic for the activity from the Topic list. 2. Select a category from each of the categories lists. The categories available depend on the topic you selected. 14 Using MimioStudio Notebook 3. Select one of the following from the Reveal answers list: l Immediately following a student response to show if the student response is correct or incorrect immediately following each response. Select this option when students are acquiring new skills. Providing feedback after each response allows you to explain to the students why a response is incorrect immediately after an error is made. l When I choose the check answers item to show the correct and incorrect answers only when you click the check answers item in the activity. Select this option when students have already acquired skills. Providing feedback after all responses are given allows you to test the students to see if they can complete the entire activity on their own. 4. Click Next to go to the next page of the wizard. Creating an Activity - Step 3: Refine Once you have completed Step 1 and Step 2, the wizard automatically generates the choice pool for the activity. The choice pool contains the set of available items students will use to complete the activity. Optionally, you can further refine your activity in the following ways: n Change the state of items in the library to always include or exclude from the choice pool. n Display items as images or text. (Not available for all items). n Increase or decrease the number of items available in the choice pool. n Change the number of items belonging to each category in the choice pool. n Update the choice pool with new items from the library. Refining the activity is optional. To skip this page of the wizard and move on to the next page, click Next. Selecting Items to Include or Exclude You can choose to always include or always exclude items from the activity. The following table describes the available states for each item. Always include item in choice pool. Never include item in choice pool. No mark Randomly include item in choice pool. To select items always to be included or excluded from the activity 1. Under Library, select the item that you want to always include or exclude. 2. Click one of the following: l l  Could you check this document to know if you keep the same issues. Include to always include the item in the choice pool. Exclude to never include the item in the choice pool. 15 MimioStudio The state of the item is updated in the library. To clear the include or exclude state for an item 1. Select the included or excluded item. 2. Click Clear. The state of the item is updated in the library. Displaying Items as Images or Text You can choose to display the items in the activity as images or as text. To display items as images or text Select one of the following from the Display Type list: l Text to display all items in the library and the choice pool as text. l Image to display all items in the library and the choice pool as images. (Not available for all items). Changing Choice Categories The number of items in the choice pool that belong to each category is determined automatically. You can replace some of the items in the choice pool with items from a different category so that the choice pool contains more choices from one category and fewer from another. The maximum number of items available in the choice pool is 20. You can increase or decrease the number of items in the choice pool by adding or removing items. To change an item in the choice pool 1. Under Choice Pool, select the item or empty position to change. 2. Do one of the following: l To replace or add an item, click the desired category for the new item. l To remove the item and leave the position empty, click Empty. Updating the Choice Pool You can update the choice pool at any time. To update the choice pool Click Update. Creating an Activity - Step 4: Review You can review the activity before inserting the activity into your Notebook. You can also enter a student-focused objective for your activity. To review the activity and enter an objective 1. Review the activity. If necessary, click Back to return to the previous pages of the wizard and make any desired changes. 2. Enter an objective in the Objective box. For information about writing a student-focused objective, see Writing an Objective. 16 Using MimioStudio Notebook 3. Click Finish. The activity is inserted as a new page in the MimioStudio Notebook. Working with an Activity Once the activity is inserted as a new page in the MimioStudio Notebook, you have several options for working with the activity. The following table describes the options available for working with your activity. Reset Answers Resets the activity and moves all answers back to the answer pool. Check Answers Indicates the correct and incorrect answers. Solve Moves all answers to the correct location in the activity. Edit Opens the wizard. From the wizard, you can edit the activity. Update Choices Updates the choices in the answer pool. To select an option for working with your activity, click To display the objective for the activity, click Writing an Objective . . Writing an Objective The purpose of the objective is to communicate expectations clearly so that the teacher and the students have a shared understanding of the performance standards by which the student will be evaluated. Remember that a good student-focused objective includes the following four parts: n Actor - The person who will complete the task (for example, the student) n Intent - The targeted category of performance (for example, identify birds and reptiles) n Indicator - The observable and measurable behaviour that reflects the intent (for example, dragging and dropping) n Outcome - The product to be evaluated (for example, images sorted into columns) Example: The student will identify birds and reptiles by dragging the images from the choice pool into the corresponding columns. Optionally, you can include the following fifth part in an objective: n Criterion - The level of performance that is targeted for mastery. This may be stated as accuracy and/or rate. Examples: l The student will identify birds and reptiles by dragging the images from the choice pool into the corresponding columns with 90% accuracy. l The student will identify birds and reptiles by dragging the images from the choice pool into the corresponding columns, with at least 9 out of 10 correct in less than one minute. 17 MimioStudio Attaching Files You can attach any type of file to a MimioStudio Notebook. Once a file is attached to the Notebook, you can quickly open the file directly from within MimioStudio Notebook. To attach a file to a Notebook 1. In the Tab View, click  to display the File Attachment pane. 2. On your computer, navigate to and select the file to attach to the Notebook. 3. Drag the file to the File Attachment pane. The file is attached to the Notebook. To open an attached file 1. In the Tab View, click  to display the File Attachment pane. 2. Double-click the file to open. Using MimioStudio Tools Using MimioStudio Tools, you can create a wide variety of objects on any MimioStudio Notebook page, including lines, shapes, and freehand drawing and writing. See Accessing MimioStudio Tools for information on accessing MimioStudio Tools. Creating Objects MimioStudio Tools provides tools for inserting freehand writing or drawing into your MimioStudio Notebook, as well as lines, arrows, basic shapes and formatted text. You can also import images and multimedia objects, or insert a clipping of your screen into your Notebook using Tools. Once you select a given drawing tool it remains selected until you select another drawing tool or the selection tool. To use the freehand pen 1. Click the Pen button, . 2. (Optional) To adjust the line width, drag the Thickness slider. 3. (Optional) To adjust the line colour, do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. Click and then select a colour from the desktop. 4. (Optional) To adjust the transparency of the line, click the Transparency button, and then choose a transparency percentage. l 5. Place the cursor where you want the ink stroke to start on the page. 6. Drag the cursor to draw ink strokes. To use the freehand brush 1. Click the Brush button, . 2. (Optional) To adjust the line width, drag the Thickness slider. 18 , Using MimioStudio Tools 3. (Optional) To adjust the line colour, do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. Click and then select a colour from the desktop. 4. (Optional) To adjust the transparency of the line, click the Transparency button, and then choose a transparency percentage. l , 5. Place the cursor where you want the brush stroke to start on the page. 6. Drag the cursor to draw brush strokes. To highlight a portion of the display 1. Click the Highlighter button, . 2. (Optional) To adjust the highlighter width, drag the Thickness slider. 3. (Optional) To change the colour, do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. Click and then select a colour from the desktop. 4. Place the cursor where you want the highlight stroke to start on the page. l 5. Drag the cursor over the area you want to highlight. To erase ink and highlighting 1. Click the Eraser button, . 2. (Optional) To adjust the eraser width, drag the Thickness slider. 3. Drag the cursor over the ink or highlighter strokes you want to erase. To add a line or shape 1. Click the line type or shape you want to add. 2. (Optional) To adjust the line or outline width, drag the Thickness slider. 3. (Optional) To change the line or outline colour, select the Outline Colour box and then do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. Click and then select a colour from the desktop. 4. (Optional) To adjust the fill colour, select the Fill Colour box and then do one of the following: l l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. l Click and then select a colour from the desktop. 5. To change the line or outline style, click l Solid Dash l Square Dot l and choose one of the following: 19 MimioStudio 6. (Optional) To adjust the transparency of the line or shape, click the Transparency button, and then choose a transparency percentage. 7. Place the cursor where you want the line or shape to start on the page. 8. Drag the cursor to draw the line or shape. To add formatted text 1. Click the Text button, . 2. Place the cursor where you want the text to start on the page. For a fixed width text box, place the cursor where you want the text box to start on the page and then drag to the desired width. 3. Select a font style, size, colour and an alignment option for the text. 4. Enter text in the text box. To draw a shape 1. Click the Shape Recognition button, . 2. (Optional) To adjust the outline width, drag the Thickness slider. 3. (Optional) To change the outline colour, select the Outline Colour box and then do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. Click and then select a colour from the desktop. 4. (Optional) To adjust the fill colour, select the Fill Colour box and then do one of the following: l l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. l Click and then select a colour from the desktop. 5. To change the line or outline style, click l l and choose one of the following: Solid Dash l Square Dot 6. (Optional) To adjust the transparency of the shape, click the Transparency button, and then choose a transparency percentage. 7. Place the cursor where you want the shape to start on the page. 8. Drag the cursor to draw the shape. The Shape Recognition tool can be used to draw circles, ellipses, triangles, rectangles, squares and lines. To import a picture, multimedia object, or document 1. Do one of the following: l From MimioStudio Tools, click , and then choose Insert File. From MimioStudio Notebook, choose File from the Insert menu. 2. From the Open dialog box, select the file to import. l 20 Using MimioStudio Tools 3. Click Open. The image or object is displayed on the Notebook page. You can also copy and paste images from another application or drag images from another application into Notebook. To insert a screen clipping 1. From MimioStudio Tools, click the Screen Clipping button, . The desktop is displayed with a transparent mask. 2. Do one of the following: l Click to insert a rectangular screen clipping. l Click to insert an elliptical screen clipping. l Click to insert a free-form screen clipping. To insert the entire desktop as a new page in the Notebook, click 3. Drag the cursor to select the area to capture. . The selected area is inserted in the Notebook page. Manipulating Objects Objects on a page can be moved, rotated, copied, deleted, locked and have their properties adjusted. To select an object 1. From MimioStudio Tools, click the Selection button, 2. Do one of the following: . l Click the object to select. l To select multiple objects, press Command and select each object. l To select multiple objects that are close to each other, drag a selection rectangle over the objects to select. l To select all objects on a page, choose Select All from the Edit menu. To move an object 1. Select the object to move. 2. Position the cursor over the object. The cursor changes to the move cursor, . 21 MimioStudio 3. Drag the object to the desired location. To resize an object 1. Select the object to resize. A frame is displayed around the object. 2. Position the cursor over one of the white sizing handles. The cursor changes to the resize cursor, 3. Drag the cursor to resize the object. . To constrain object proportions during resizing, right-click the object and choose Fixed Aspect Ratio. To rotate an object 1. Select the object to rotate. A frame is displayed around the object. 2. Position the cursor over the green rotation handle. The cursor changes to the rotation cursor, 3. Drag the cursor to rotate the object. . To snap to one of the predefined 45° increments, move the rotate cursor and release 22 Using MimioStudio Tools over the predefined rotation anchor point. To lock the position and properties of an object 1. Select the object to lock. 2. From the Format menu, point to Locking and then choose Lock. A locked object cannot be selected. To unlock an object From the Format menu, point to Locking and then choose Unlock All. Objects can only be unlocked collectively; you cannot unlock individual objects. To delete an object 1. Select the object to delete. 2. Drag the object to the trash can, . To reorder objects 1. Select the object to reorder. 2. Choose Order from the Format menu. 3. Choose how to order the object. Option Action Front Brings the selected object to the front of the order. Back Sends the selected object to the back of the order. Forward Steps the object forward in the order, by one. Backward Steps the object backward in the order, by one. To group objects 1. Select the objects to group. 2. From the Format menu, point to Grouping and then choose Group. To ungroup objects 1. Select the objects to ungroup. 2. From the Format menu, point to Grouping and then choose Ungroup. To edit object properties 23 MimioStudio 1. Select the object to edit. 2. To adjust the line or outline width, drag the Thickness slider. 3. To adjust the colour, select the Outline Colour box or the Fill Colour box and then do one of the following: l Select a colour from the Colour Palette. l Click , and then select a colour from the Colour dialog box. l Click , and then select a colour from the desktop. 4. To change the line or outline style, click l Solid Dash l Square Dot l and choose one of the following: 5. To adjust the transparency, click the Transparency button, transparency percentage. , and then choose a To change the fill colour of an object 1. From MimioStudio Tools, click the Object Fill button, 2. Do one of the following: l Select a colour from the Colour Palette. l Click . , and then select a colour from the Colour dialog box. Click , and then select a colour from the desktop. 3. Click the object to change the fill colour for it. l To change the fill colour for an object that currently has no fill colour, click the object border. To edit text 1. Double-click the text box. 2. Select the text to adjust or enter new text. 3. Adjust the font style, size, colour or alignment. To import an object from another Notebook page 1. Select the object to import from the source Notebook page. 2. Click the Copy button, . 3. Navigate to the target Notebook page. 4. Click the Paste button, . You can also import an object by dragging the object from the source page to the target page. To convert ink to text 1. Select the objects to convert. All selected objects are combined into one text object. 2. Do one of the following: l Right-click and then choose l Choose To convert ink to shapes 24 Recognise Text. Recognise Text from the Tools menu. Using MimioStudio Tools 1. Select the objects to convert. 2. Do one of the following: l Right-click and then choose l Choose Recognise Shapes. Recognise Shapes.from the Tools menu. To snap objects to grid 1. Choose Grid from the View menu. The Grid dialog box appears. 2. To force objects to snap to grid, select the Snap objects to grid check box. 3. To allow objects to snap to angles, select the Snap objects to angles check box. 4. To adjust the spacing between grid snap locations, enter the desired value into the Spacing box. 5. To display a grid on the screen, select the Display grid on screen check box. 6. To make the grid settings permanent for each new MimioStudio Notebook, select the Set as default for all new documents check box. 7. Click OK. Adding Actions to Objects Objects can have actions associated with them. You can associate an action with any object that you create or import into a MimioStudio Notebook; you cannot add an action to a template or background. You can choose to perform the associated action each time you click the object or each time you drag the object. You can associate two different actions with a single object. For example, you can choose to launch a hyperlink when you click an object and clone the object when you drag the object. However, you cannot associate two different hyperlinks or two different sounds with the same object. There are three types of actions that you can associate with objects: n Launch Hyperlink - opens a file, a web page or a different page within a Notebook. n Clone - creates a copy of the object on the Notebook page. n Play Sound - plays a sound file. To add a hyperlink to an object 1. Select the object to add the hyperlink to. 2. Choose Hyperlink from the Insert menu. The Action Settings dialog box appears. 3. Select one of the following from the Action list: l On Click - to launch the hyperlink each time the object is clicked. l On Drag - to launch the hyperlink each time the object is dragged. 4. Select Launch Hyperlink from the Feature list. 5. Select Existing file or Web Page from the Link To list. Alternatively, select a page from within the current Notebook from the Link To list. 6. Enter a file name or web address to link to in the Address box. 25 MimioStudio Alternatively, click Browse to search for a file to link to. 7. Click OK to add the hyperlink to the object. To add cloning to an object 1. Select the object to add the clone action to. 2. Choose Action Settings from the Insert menu. The Action Settings dialog box appears. 3. Select one of the following from the Action list: l On Click - to create a copy of the object each time the object is clicked l On Drag - to create a copy of the object each time the object is dragged 4. Select Clone from the Feature list and then click OK. You can also add the clone action to an object by choosing Clone from the Insert menu. By default, a copy of the object is created whenever you drag the object. To add a sound to an object 1. Select the object to link the sound file to. 2. Choose Action Settings from the Insert menu. The Action Settings dialog box appears. 3. Select one of the following from the Action list: l On Click - to play the sound file each time the object is clicked l On Drag - to play the sound file each time the object is dragged 4. Select Play Sound from the Feature list. 5. Click Load. The Open dialog box appears. 6. Navigate to and select the sound file to link to the object and then click Open. 7. Click OK in the Action Settings dialog box. To remove an action from an object 1. Select the object with the action to remove. 2. Choose Action Settings from the Insert menu. The Action Settings dialog box appears. 3. Choose None from the Feature list and then click OK. Adding Animations to Objects Objects can have animations associated with them. You can associate an animation with any object that you create or import into a MimioStudio Notebook; you cannot add an animation to a template or background. You can choose to perform the associated animation each time you click the object or each time the page containing the object is displayed. To add an animation to an object 1. Select the object to add the animation to. 2. Choose Animate from the Insert menu. The Animation Settings dialog box appears. 3. Select the desired animation from the Animations list. 26 Using MimioStudio Gallery 4. Select one of the following from the Start list: l When the object is clicked - to start the animation when the object is clicked. l When the page is entered - to start the animation each time the page containing the object is displayed. 5. If available, select one of the following from the Triggers list: l Default l Results l Notes 6. Click OK to close the dialog box and save your settings. To remove an animation from an object 1. Select the object with the animation to remove. 2. Choose Animate from the Insert menu. The Animation Settings dialog box appears. 3. Select None from the Animations list, and then click OK. Using MimioStudio Gallery MimioStudio Gallery consists of the following four main folders: n Screen Annotations - contains all saved Screen Annotation snapshots. n Imported Content Packs - contains any imported content that you have not yet added to the Gallery folder. n Questions and Results - contains a variety of objects for use with MimioVote. n Gallery - contains a number of different folders used to categorise items such as Geography, Mathematics and so on. n Collaborative Sessions - contains all saved Collaborate pages. The Gallery folder and each of the Gallery subfolders can contain five different types of objects: n Images - Images include pictures and graphics. n Templates - Templates include backgrounds and predefined page layouts. n Multimedia - Multimedia objects include movies, animation and sound. n Questions and Results - Questions and Results include objects for creating and displaying the results of MimioVote activities. This section of the Gallery does not appear until you move objects from the Questions and Results folder to the Gallery folder or a Gallery subfolder. n Lessons - Lessons include lessons created using MimioStudio Notebook and imported documents. You can create your own lessons or import lessons created by someone else. See Accessing MimioStudio Gallery for information on accessing MimioStudio Gallery. To navigate MimioStudio Gallery Click any folder to view the available items in that folder. Click the arrow next to a Gallery folder to see any subfolders that are contained in that Gallery folder. To select a Gallery item 27 MimioStudio 1. Navigate to the Gallery folder that contains the item you want to select. 2. Do one of the following: l Click the Gallery item to select. l To select multiple items, press Command and select each item. l To select multiple items that are close to each other, drag a selection rectangle over the items to select. l To select a range of items, select the first item and then press SHIFT and select the last item. l To select all items, right-click and then choose Select All. Importing Gallery Items into a Notebook You can import any Gallery item into a MimioStudio Notebook to add to your presentation. To import a Gallery item into a Notebook 1. Select the image, template, multimedia item, questions and results object, or lesson to import. 2. Drag the item into the Notebook. You can also import items by double-clicking or by copying and pasting the items into a Notebook. Customizing the Content of the Gallery The MimioStudio Gallery is fully expandable and modifiable, so you can add your own folders, pictures, templates, multimedia items and lessons. You can also add Microsoft Word, PowerPoint, and PDF documents to the Gallery. All imported documents are placed in the Lessons section of the MimioStudio Gallery MimioStudio does not support network or shared galleries. To import a Gallery folder from a Gallery file 1. Click the Import Content Pack button, . 2. From the Open dialog box, navigate to and select the Gallery file to import. 3. Click Open. The contents of the Gallery file are added to the Imported Content Packs folder in MimioStudio Gallery. 4. Review the imported content and make any desired changes. 5. To move the content to the Gallery folder, right-click the folder to move and then choose Install. The content is moved to the Gallery folder. To add a new Gallery folder 1. Select the main Gallery folder or a Gallery subfolder to add the new folder to. 2. Click the New Folder button, . The Item Information dialog box appears. 3. Enter a name for the new folder in the Name box. 4. (Optional) Enter a keyword in the Keywords box to make the new folder searchable 28 Using MimioStudio Gallery from the Gallery search bar. 5. Click OK. To add a new item to a folder 1. Select the folder to add the item to. 2. Click the Insert File button, . 3. From the Open dialog box, navigate to and select the file to import. 4. Click Open. The item is inserted in the appropriate area of the Gallery folder. You can also add new items by selecting one or more items and then dragging and dropping or copying and pasting them into a Gallery folder. To create a template from a Notebook image 1. Right-click and drag the image into the Gallery. The right-click menu appears. 2. Choose Insert as template. To copy an existing Gallery item 1. Select the Gallery item to copy. 2. Click the Copy button, . 3. Select a Gallery folder to insert the new item into. 4. Click the Paste button, . The item is inserted in the appropriate area of the Gallery folder. To delete a Gallery item 1. Select the Gallery item to delete. 2. Click the Delete button, . A delete confirmation dialog box appears. 3. Click Yes. To find similar Gallery items 1. Right-click the Gallery item, and then choose Open Folder. 2. If the item is contained in more than one folder, choose the folder to open. The folder containing the selected item opens in MimioStudio Gallery. Exporting a Gallery Folder to a Gallery File Entire Gallery folders can be exported and imported into the MimioStudio Gallery as Gallery (MCF) files. You can then share Galleries that you have created with other MimioStudio users. MimioStudio does not support network or shared galleries. To export a Gallery folder to a Gallery file 1. Select the Gallery folder to export. 2. Click the Export Content Pack button, . 3. From the Save As dialog box, enter a name for the file in the Save As box. 4. Select a location to save the file to. 5. Click Save. 29 MimioStudio Working with Saved Annotation Snapshots MimioStudio automatically saves a snapshot of the annotated screen each time you exit Screen Annotation mode. These snapshots are saved in the Screen Annotations folder in MimioStudio Gallery. For information about creating Screen Annotation snapshots, see Marking Up the Display Using Screen Annotations. Viewing Screen Annotation Snapshots You can view your saved screen annotations from the Screen Annotations folder in MimioStudio Gallery. To view Screen Annotation snapshots 1. Start MimioStudio Gallery. 2. Select the Screen Annotations folder. To select a snapshot Do one of the following: l Click on the snapshot to select. l To select multiple snapshots, press Command and select each snapshot. l To select multiple snapshots that are close to each other, drag a selection rectangle over the snapshots. l To select a range of snapshots, select the first snapshot and then press SHIFT and select the last snapshot. l To select all snapshots, right-click and then choose Select All. Renaming an Annotation Snapshot Screen Annotation snapshots are saved in chronological order, using the date and time that the snapshot was created as the name of the snapshot. You can rename a snapshot any time after it has been saved. To rename a snapshot 1. Select the snapshot to rename. 2. Right-click and choose Properties. 3. Enter a name for the snapshot in the Name box and click OK. Adding Keywords to an Annotation Snapshot You can add keywords to any snapshot so that you can use the search bar in MimioStudio Gallery to find that snapshot later. To add keywords to a snapshot 1. Select the snapshot to add keywords to. 2. Right-click and choose Properties. 3. Enter each keyword on a separate line in the Keywords box and click OK. 30 Working with Saved Annotation Snapshots Searching for an Annotation Snapshot You can search for a specific snapshot using the search bar in MimioStudio Gallery. You can search for a snapshot using a keyword or part of the snapshot name. To search for a specific snapshot 1. Select the Screen Annotations folder in the Gallery. 2. Enter text to search for in the Search box. All snapshots associated with the text appear in the preview area of the Gallery. Importing an Annotation Snapshot You can import a snapshot into an open Notebook. To import a snapshot 1. Open a MimioStudio Notebook. 2. Select the snapshot to import. 3. Drag the selected snapshot into the target Notebook. Pasting an Annotation Snapshot Into Another Application Annotation snapshots can be used in other applications such as Microsoft Word or PowerPoint. To paste a snapshot into another application 1. Select the snapshot to copy. 2. Click the Copy button, . 3. Navigate to the target application. 4. Right-click and then choose Paste. Alternatively, you can drag the selected snapshot into the target application. Printing Annotation Snapshots You can print a snapshot directly from the Screen Annotations folder in MimioStudio Gallery. To print a snapshot 1. Select the snapshot to print. 2. Right-click and choose Print. Deleting Annotation Snapshots You can delete snapshots from the Screen Annotations folder. To delete a snapshot 1. Select the snapshot to delete. 2. Click the Delete button, . A delete confirmation dialog box appears. 3. Click Yes. 31 MimioStudio Delivering Interactive Notebook Lessons and Presentations MimioStudio Notebook can be used to deliver lessons and presentations that were created in or imported into a MimioStudio Notebook. Using Fullscreen View For presenting information, the Fullscreen view can be used to fill the entire screen with the current page. The MimioStudio Notebook standard toolbar and all MimioStudio Tools are available in Fullscreen view. To access the Fullscreen view Click the Fullscreen button, . The current page fills the entire screen and the MimioStudio Notebook standard toolbar remains visible. Navigating Through a Presentation To navigate through a Notebook presentation Use the MimioStudio Notebook standard toolbar to navigate through the Notebook presentation. Button Action Use this button to enter or exit the Fullscreen view. Use this button to insert a new page Use this button to return to the previous page in the Notebook. Use this button to advance to the next page in the Notebook. Working with Multimedia Objects You can play, pause, fast forward and rewind the movie, animation and sound objects you added to your presentation. To play video or audio Click anywhere on the movie, animation or sound object to play. To show and hide the video and audio controls 1. While the video or audio is playing, click once anywhere on the object to view the object controls. 2. Click the object again to hide the controls. To pause, fast forward or rewind video or audio 32 Delivering Interactive Notebook Lessons and Presentations Do one of the following: l To pause the video or audio, click . To fast forward the video or audio, drag the slider to the right. l To rewind the video or audio, drag the slider to the left. l 33 This page intentionally left blank for double-sided printing. 34 Chapter 3 MimioTeach Using MimioTeach with a projector, you can deliver lessons and presentations directly from your whiteboard. In MimioStudio Interactive mode you control the movement of the cursor on your screen with the MimioTeach stylus, much like you would with a mouse at your computer. What's Included The MimioTeach package contains the following items: 1 MimioTeach bar 4 USB cable 2 USB power adaptor 5 Mounting plates 3 MimioHub 6 MimioTeach stylus If you are missing any of the items above, contact Customer Support. About MimioTeach You can use the MimioTeach bar and stylus in MimioStudio Interactive mode to deliver lessons and presentations. You can also use the MimioTeach bar with MimioCapture to capture notes from your whiteboard into MimioStudio Notebook. For more information about using MimioTeach with MimioCapture, see MimioCapture. 35 MimioTeach The following figure shows the major components of the MimioTeach. 1 Start Tools (button B) 5 USB/Power connector 2 Hover/Right-click (button A) 6 Launch 3 MimioHub dock 7 Calibrate 4 Power/Status light Status Lights The status light visually shows the status of the MimioTeach bar. 36 Off Not receiving power; USB/power cable is not connected or MimioTeach is turned off. Solid Green MimioTeach is connected and receiving power; MimioStudio software is running. Flashing Green MimioTeach is connected or connecting, and receiving power; MimioStudio software is not running. Solid Amber MimioTeach cannot find an available MimioHub. Flashing Amber MimioTeach is searching for an available MimioHub. About MimioStudio Tools Using the various presentation tools found in MimioStudio Tools you can get your audience to focus on a specific area of the screen by displaying only certain parts of it. You can also annotate the screen with the drawing tools available in MimioStudio Tools using the Screen Annotation feature. For more information about MimioStudio Tools, see Marking Up the Display Using Screen Annotations. 37 MimioTeach The following table describes the major components of MimioStudio Tools. Selection tool Zoom Pen Brush Text Highlighter Line Arrow End Arrow Start Arrow Both Rectangle Ellipse Triangle Right-Angled Triangle Five-Pointed Star Hexagon Pentagon Shape Recognition Eraser Insert file Screen clipping Colour picker More colours Object Fill Outline and Fill colour Thickness slider Colour palette Solid Line Dash Line Square Dot Line Transparency Gallery Applications (see below) Right-click Interactive Mouse Screen Annotation From the Applications tool, you can access the following: Reveal Spotlight Text Tools 38 Class Manager Control  Quick Collaborate Quick Vote Recorder View Calculator Web Browser Getting Started Getting Started Review the following topics to install and start using your MimioTeach. n Setting Up the MimioTeach Stylus n Setting Up the MimioTeach Bar n Setting Up Interactive Mode Setting Up the MimioTeach Stylus The MimioTeach stylus is powered by a rechargeable lithium-ion battery. The battery recharges whenever the stylus is docked on the MimioTeach bar. To set up the MimioTeach stylus 1. Turn the top of the stylus counter-clockwise to separate the top from the body of the stylus. 2. Remove the plastic strip from the stylus. 3. Replace the top onto the body of the stylus and turn clockwise to attach. Setting Up the MimioTeach Bar The MimioTeach bar comes pre-linked to the included MimioHub. You can also use this MimioHub to connect other MimioClassroom devices to your computer, such as MimioVote. 39 MimioTeach When not in use, the MimioHub can be stored in the MimioHub dock on the back of the MimioTeach bar. MimioTeach is powered using the included USB cable and power adapter. Optionally, MimioTeach can be powered using three AAA batteries. For information about using batteries to power the MimioTeach bar, see Inserting the Batteries. To set up the MimioTeach bar 1. Plug the USB cable into the USB port on the power adaptor. 2. Plug the other end of the USB cable into the USB port on the MimioTeach bar. 3. Plug the power adaptor into a power outlet. 4. Place the MimioTeach bar along the left edge of the whiteboard as shown. 40 Getting Started The MimioTeach bar attaches securely to any magnetic whiteboard. See Mounting MimioTeach to a Non-Magnetic Whiteboard for information about mounting the bar to a non-magnetic whiteboard. 5. Plug the MimioHub into an available USB port on your computer. If you do not want to connect the MimioTeach bar to your computer wirelessly, you can link the bar to your computer using the included USB cable without the power adapter. The bar will be powered by USB through your computer. Setting Up Interactive Mode Using MimioStudio Interactive mode, you can deliver lessons and presentations directly from your whiteboard. To use Interactive mode you need a projector, a MimioTeach-enabled whiteboard and a MimioTeach stylus. Combined, these devices make for a powerful tool for delivering lessons and presentations. Projecting Your Desktop If you are presenting from a MimioStudio Notebook or another application, such as a PowerPoint presentation, you can open the application before or after Interactive mode is enabled and calibrated. To start Interactive mode 1. Project your desktop image onto your whiteboard. Refer to your projector’s documentation for instructions on how to project your desktop image. 2. Adjust the projected image so that there is a 2- to 3-inch buffer between the edge of your projection and your MimioTeach. 41 MimioTeach 3. Click the MimioTeach stylus anywhere on the whiteboard. Interactive mode starts and the calibration screen appears. To exit Interactive mode Do one of the following: l Press the Interactive button, l Start MimioStudio Tools, click Interactive and then click Exit. Start MimioStudio Preferences, select Interactive and then click Disable. l , twice on the MimioTeach bar. See Customizing MimioStudio for information on how to access MimioStudio Preferences. Calibrating Interactive Mode Each time Interactive mode is enabled, you are prompted to calibrate using the MimioTeach stylus. When using a permanently installed whiteboard and projector, you do not need to recalibrate Interactive mode after the first session. See Adjusting the Interactive Preferences. To calibrate Interactive mode 1. If the calibration screen does not appear when you start Interactive mode, do one of the following: l Press the Interactive button, l Start MimioStudio Tools, click the Interactive button, Recalibrate. , on your MimioTeach bar. l Start MimioStudio Preferences, select Interactive and then click Calibrate. and then click 2. Press the MimioTeach stylus down on the whiteboard at the centre of each of the nine calibration targets. Make sure to hold the stylus perpendicular to the writing surface as you click. The calibration target disappears and the next calibration target appears. When the calibration screen disappears, Interactive mode is enabled. Using MimioTeach You can use the MimioTeach bar and stylus in MimioStudio Interactive mode to deliver lessons and presentations. In MimioStudio Interactive mode, you control the movement of 42 Using MimioTeach the cursor on your screen with the MimioTeach stylus, much like you would with a mouse at your computer. You can also use the various presentation tools found in MimioStudio Tools to focus your audience on a specific area of the screen by displaying only certain parts of the screen. And you can annotate the screen with the drawing tools available in MimioStudio Tools using the Screen Annotation feature. Using the MimioTeach Stylus In Interactive mode, the MimioTeach stylus can be used to control your desktop and interact with applications on your computer from your whiteboard. The following table describes how to use the MimioTeach stylus to control your desktop from the whiteboard. To execute Do this Left mouse click Click in the projected area at the desired location with the tip of the stylus. Double left mouse click Quickly click twice in the projected area at the desired location with the tip of the stylus. Right mouse click Press the B button on the stylus and then click in the projected area at the desired location with the tip of the stylus. Hover 1. Hold the stylus at the desired location, staying as close to the whiteboard as possible without touching it. 2. Press the B button on the stylus. 3. Move the stylus to the desired location. 4. Release the B button on the stylus. To change the functions of the MimioTeach stylus buttons, see Adjusting the Interactive Preferences. Focusing Attention Using the Reveal and Spotlight Tools The Reveal tool and the Spotlight tool help you to focus your audience on a specific area of the screen by keeping parts of the screen hidden. Using the Reveal Tool The Reveal tool creates a shade that you can raise, lower, move left and move right over the screen image, as if you are moving a shade up, down or across the screen. You can then expose bullet points or other information progressively. 43 MimioTeach To use the Reveal tool Do one of the following: l From MimioStudio Tools, click the Applications button Reveal. l (Interactive mode only) Press the Launch button, then click Reveal in the Launch window. and then choose , on the MimioTeach bar and To adjust the revealed area Click inside the shaded area and drag down, up, left, or right to reveal more or less of the displayed area. To adjust the transparency of the Reveal tool 1. Click and then point to Transparent. 2. From the Transparent list, choose a percentage. A transparency of 0% means that the shaded area will be completely opaque. Using the Spotlight Tool The Spotlight tool masks the entire screen except for a small area, the spotlight. You can then focus audience attention on a specific area of the screen. The spotlight area can be reshaped, resized and moved around the screen. 44 Using MimioTeach To use the Spotlight tool 1. Do one of the following: l From MimioStudio Tools, click the Applications button, Spotlight. , and then choose (Interactive mode only) Press the Launch button, , on the MimioTeach bar and then click Spotlight in the Launch window. 2. Click the shaded area outside of the spotlight border and drag the spotlight to the desired location. l To adjust the shape of the spotlight 1. Click and then point to Shape. 2. From the Shape list, choose a shape for the spotlight. To resize the spotlight 1. Click and then point to Size. 2. From the Size list, choose a spotlight size. You can also resize the spotlight by dragging the coloured border of the spotlight until the spotlight is the desired size. To adjust the spotlight transparency 1. Click and then point to Transparent. 2. From the Transparent list, choose a transparency percentage. A transparency of 0% means that the shaded area will be completely opaque. Marking Up the Display Using Screen Annotations Screen Annotation mode allows you to annotate applications, web pages and images. When in Annotation mode, a green border with a faded edge appears around your desktop. When you exit from Screen Annotation mode, all annotations are cleared from the whiteboard and automatically archived in the Screen Annotations folder in MimioStudio Gallery. Enabling Screen Annotation Mode To enable Screen Annotation mode 45 MimioTeach 1. Do one of the following l From MimioStudio Tools, click the Screen Annotation button, current desktop image. , to freeze your (Interactive mode Only) Press the Launch button, , on the MimioTeach bar and then click Screen Annotation in the Launch window. A green border with a faded edge appears around your desktop. l 2. Annotate the screen using MimioStudio Tools. All object, drawing and manipulation features in MimioStudio Tools are available in Screen Annotation mode. To exit Screen Annotation mode Do one of the following: l From MimioStudio Tools, click the Mouse button, , to “unfreeze” the screen. l (Interactive mode only) Press the Launch button, , on the MimioTeach bar and then click Screen Annotation in the Launch window. To disable the Annotation mode border 1. Click  on the menu bar and choose Preferences. 2. Select Notebook from the MimioStudio Preferences dialog box. 3. Under General, clear the Enable fullscreen border (Screen Annotation only) check box. 4. Click OK to save the preferences. Annotating the Screen Using MimioStudio Tools MimioStudio Tools are used to annotate the screen. All object, drawing, and manipulation features in MimioStudio Tools are available in Screen Annotation mode. Once you select a given drawing tool it remains selected until you select another drawing tool or the selection tool. See Manipulating Objects for a complete description of manipulating objects. All of the functions and features of the MimioStudio drawing tools that are available in MimioStudio Notebook are available in Screen Annotation mode. To use the freehand pen 1. Click the Pen button, . 2. (Optional) To adjust the line width, drag the Thickness slider. 3. (Optional) To adjust the line colour, do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. Click and then select a colour from the desktop. 4. (Optional) To adjust the transparency of the line, click the Transparency button, and then choose a transparency percentage. l 5. Place the cursor where you want the ink stroke to start on the page. 6. Drag the cursor to draw ink strokes. To use the freehand brush 46 , Using MimioTeach 1. Click the Brush button, . 2. (Optional) To adjust the line width, drag the Thickness slider. 3. (Optional) To adjust the line colour, do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. Click and then select a colour from the desktop. 4. (Optional) To adjust the transparency of the line, click the Transparency button, and then choose a transparency percentage. l , 5. Place the cursor where you want the brush stroke to start on the page. 6. Drag the cursor to draw brush strokes. To highlight a portion of the display 1. Click the Highlighter button, . 2. (Optional) To adjust the highlighter width, drag the Thickness slider. 3. (Optional) To change the colour, do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. l Click and then select a colour from the desktop. 4. Place the cursor where you want the highlight stroke to start on the page. 5. Drag the cursor over the area you want to highlight. To erase ink and highlighting 1. Click the Eraser button, . 2. (Optional) To adjust the eraser width, drag the Thickness slider. 3. Drag the cursor over the ink or highlighter strokes you want to erase. To add a line or shape 1. Click the line type or shape you want to add. 2. (Optional) To adjust the line or outline width, drag the Thickness slider. 3. (Optional) To change the line or outline colour, select the Outline Colour box and then do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. l Click and then select a colour from the desktop. 4. (Optional) To adjust the fill colour, select the Fill Colour box and then do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. l Click and then select a colour from the desktop. 5. To change the line or outline style, click l l and choose one of the following: Solid Dash 47 MimioTeach Square Dot 6. (Optional) To adjust the transparency of the line or shape, click the Transparency button, and then choose a transparency percentage. 7. Place the cursor where you want the line or shape to start on the page. l 8. Drag the cursor to draw the line or shape. To add formatted text 1. Click the Text button, . 2. Place the cursor where you want the text to start on the page. For a fixed width text box, place the cursor where you want the text box to start on the page and then drag to the desired width. 3. Select a font style, size, colour and an alignment option for the text. 4. Enter text in the text box. To draw a shape 1. Click the Shape Recognition button, . 2. (Optional) To adjust the outline width, drag the Thickness slider. 3. (Optional) To change the outline colour, select the Outline Colour box and then do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. l Click and then select a colour from the desktop. 4. (Optional) To adjust the fill colour, select the Fill Colour box and then do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. l Click and then select a colour from the desktop. 5. To change the line or outline style, click l Solid Dash l Square Dot l and choose one of the following: 6. (Optional) To adjust the transparency of the shape, click the Transparency button, and then choose a transparency percentage. 7. Place the cursor where you want the shape to start on the page. 8. Drag the cursor to draw the shape. The Shape Recognition tool can be used to draw circles, ellipses, triangles, rectangles, squares and lines. Clearing All Annotations from the Display When you exit Screen Annotation mode, all annotations are cleared from the display and all annotations are automatically preserved as a snapshot of the display. See Working with Saved Annotation Snapshots for information about reviewing and using the snapshots. 48 Using MimioTeach Inserting Text Into an Application Using MimioStudio Text Tools You can enter text into any text-entry box or page using the MimioStudio Text Tools. The Text Tool has three modes for entering text: n On-Screen Keyboard allows you to enter text through an on-screen keyboard application. n Writing Pad allows you to enter text through a small on-screen writing pad. Your handwriting is automatically converted into text and input into the current application. In addition, Writing Pad also supportsgesture recognition, which allows handwritten shortcuts to be automatically recognised as commonly used keys. Gesture recognition is only supported on Intel-based systems. To access MimioStudio Text Tools 1. From MimioStudio Tools, click the Applications button, Tools. , followed by Text 2. Click the Text Tools icon  or  on the menu bar. 3. Choose the Text Tool that you want to use. l Keyboard to enable the On-Screen Keyboard. l Writing Pad to enable Writing Pad. To disable MimioStudio Text Tools Do one of the following: l Click the Text Tools icon selected Text Tool.  or  on the menu bar and then choose the currently l From MimioStudio Tools, click the Applications button, Tools. , followed by Text Using the On-Screen Keyboard You can enter text into any application using the On-Screen Keyboard. To use the On-Screen Keyboard 1. Start the On-Screen Keyboard. 2. Click in the text-entry box or on the page where you want to enter the text. 3. Using your mouse or MimioTeach stylus, press the virtual keys on the on-screen keyboard. The text is entered into the text-entry box or on the page that you selected. Using Writing Pad With Writing Pad you can enter text by means of a small, on-screen writing pad using the MimioTeach stylus while in Interactive mode. You can also use Writing Pad with your mouse or other input device from your computer. To use Writing Pad 1. Start Writing Pad. The on-screen writing pad appears. 2. Click in the text-entry box or on the page where you want to enter the text. 49 MimioTeach 3. Using your mouse or MimioTeach stylus, write within the yellow space of the onscreen writing pad. Your handwriting is automatically converted to text and entered into the textentry box or on the page that you selected. 4. Use the on-screen buttons for commonly used keys. Button Description Backspace Enter Tab Space Writing Pad also supports gesture recognition for commonly used keys. See Using Gesture Recognition. Using Gesture Recognition With gesture recognition, handwritten shortcuts are automatically recognised as commonly used keys. Writing Pad supports gesture recognition. Gesture recognition is only supported on Intel-based systems. The following table describes how to use gestures to perform common functions. To press Do this Backspace Draw a line from right to left. Enter Draw a connected line from top to bottom and then from right to left. Tab Space bar 50 Draw a connected line from bottom to top and then from left to right. Draw a connected line from top to bottom and then from left to right. Caring for MimioTeach Using the Web Browser and Calculator Tools MimioStudio Tools includes shortcuts for accessing a Web browser and a calculator. To use the tools 1. Start MimioStudio Tools. 2. Click the Applications button, following tools: l  Calculator l  Web Browser , choose More Tools and then choose one of the Recording Desktop Actions and Audio in Interactive Mode Using MimioStudio Recorder, you can record your interactions into an MP4 movie file, with or without audio. See Using MimioStudio Recorder for more information on how to use MimioStudio Recorder. Caring for MimioTeach Refer to the following topics for information about cleaning, inserting the batteries and permanently attaching your MimioTeach. n Cleaning MimioTeach n Inserting the Batteries n Attaching MimioTeach to a Non-Magnetic Whiteboard Cleaning MimioTeach MimioTeach is designed to give you long and trouble-free service while requiring very little maintenance. You can easily clean your MimioTeach using the following items: n Lint-free cloth. n Isopropyl alcohol, diluted dishwashing detergent or diluted glass cleaner. If you use glass cleaner make sure it does not contain ammonia. To clean the MimioTeach bar and stylus 1. Disconnect the USB cable from the MimioTeach bar. 2. Use the lint-free cloth to wipe the exterior of the MimioTeach bar and stylus. 3. Remove dirt and smudges with one of the cleaning solutions mentioned above. Avoid using liquids on any exposed charging contacts. Do not allow liquid into any openings on the equipment. 4. Reconnect the USB cable. Inserting the Batteries MimioTeach is powered using the included USB cable and power adapter. Optionally, MimioTeach can be powered using three AAA batteries. To insert the batteries 51 MimioTeach 1. Press down and slide off the battery compartment cover. 2. Insert three AAA batteries into the battery compartment. 3. Replace the battery compartment cover. Remove the batteries if the MimioTeach bar will not be used for a long period of time. Attaching MimioTeach to a Non-Magnetic Whiteboard The MimioTeach bar attaches securely to any magnetic whiteboard. If you do not have a magnetic whiteboard, you can attach the MimioTeach bar to your whiteboard using the metal plates provided. If you are installing both MimioTeach and MimioCapture, you must attach MimioCapture before attaching MimioTeach. This will ensure correct placement of the MimioTeach bar. See Attaching MimioCapture to a Non-Magnetic Whiteboard for information on attaching MimioCapture. To attach MimioTeach to a non-magnetic whiteboard 1. Place the metal plates against the back of the MimioTeach bar as shown. Make sure that the recess on each plate is inserted into the recess on the back of the MimioTeach bar. 2. Remove the paper backing from the adhesive strips to expose the adhesive. 52 Caring for MimioTeach 3. Press the MimioTeach bar firmly along the left edge of the whiteboard as shown. 53 This page intentionally left blank for double-sided printing. 54 Chapter 4 Mimio Interactive Using Mimio Interactive with a projector, you can deliver lessons and presentations directly from your whiteboard. Using MimioStudio Interactive mode, you control the movement of the cursor on your screen with the Mimio Interactive mouse, much like you would with a mouse at your computer. What's Included The Mimio Interactive package contains the following items: 1 Mimio Interactive bar 4 Mimio mouse 2 Mounting brackets 5 AA battery 3 USB cable If you are missing any of the items above, contact Customer Support. About Mimio Interactive You can use the Mimio Interactive bar and mouse in MimioStudio Interactive mode to deliver lessons and presentations. You can also use the Mimio Interactive bar with Mimio Capture Kit to capture notes from your whiteboard into MimioStudio Notebook. For more information about using Mimio 55 Mimio Interactive Interactive with Mimio Capture Kit, see Mimio Capture Kit. The following figure shows the major components of Mimio Interactive. 1 A button (right-click) 7 Print page (Spotlight tool) 2 B button (hover) 8 Resize window (Reveal tool) 3 Power button/status light 9 Interactive 4 Learning button 10 Data transmission status light 5 New page (MimioStudio Tools) 11 Memory status light 6 Copy page (Annotation mode) Status Lights The status lights visually show the status of the Mimio Interactive bar. Power Status Lights Off 56 Not receiving power; USB/power cable is not connected, batteries need to be replaced or Mimio Interactive is turned off. Solid Green Mimio Interactive is receiving power. Solid Amber Mimio Interactive is receiving power; one to five hours of battery life remaining. Flashing Amber Mimio Interactive is receiving power; less than one hour of battery life remaining. Data Transmission Status Lights Off Mimio Capture Kit pen or Mimio Interactive mouse is not in use. Solid Green Mimio Capture Kit pen or Mimio Interactive mouse is in use. Solid Amber Mimio Capture Kit pen or Mimio Interactive mouse battery is low. Memory Status Lights Off Mimio Interactive bar memory is empty. Flashing Green Data is being downloaded from the Mimio Interactive bar to your computer. Solid Green Mimio Interactive bar memory is less than 80% full. Solid Amber Mimio Interactive bar memory is between 80% and 90% full. Flashing Amber Mimio Interactive bar memory is over 90% full. About Mimio Wireless You can use the Mimio Wireless module and wireless receiver to connect the Mimio Interactive bar wirelessly to your computer. The following figure shows the major components of Mimio Wireless. 57 Mimio Interactive 1 Power button/status light 6 Resize window (Reveal tool) 2 Learning button 7 Interactive 3 New page (MimioStudio Tools) 8 Link status light 4 Copy page (Annotation mode) 9 Data transmission status light 5 Print page (Spotlight tool) Status Lights The status lights visually show the status of the Mimio Interactive bar. Power Status Lights Off Not receiving power; USB/power cable is not connected, batteries need to be replaced or Mimio Interactive is turned off. Solid Green Mimio Interactive is receiving power. Solid Amber Mimio Interactive is receiving power; one to five hours of battery life remaining. Flashing Amber Mimio Interactive is receiving power; less than one hour of battery life remaining. Link Status Lights 58 Solid Green Mimio Interactive is connected to the wireless receiver. Flashing Green Mimio Interactive is establishing a connection to the wireless receiver. Solid Amber Mimio Interactive cannot find an available wireless receiver. Data Transmission Status Lights Flashing Green (slowly) Mimio Capture Kit pen or Mimio Interactive mouse is not in use. Flashing Green (quickly) Mimio Capture Kit pen or Mimio Interactive mouse is in use. Solid Amber Mimio Capture Kit pen or Mimio Interactive mouse battery is low. About MimioStudio Tools Using the various presentation tools found in MimioStudio Tools you can get your audience to focus on a specific area of the screen by displaying only certain parts of it. You can also annotate the screen with the drawing tools available in MimioStudio Tools using the Screen Annotation feature. For more information about MimioStudio Tools, see Marking Up the Display Using Screen Annotations. 59 Mimio Interactive The following table describes the major components of MimioStudio Tools. Selection tool Zoom Pen Brush Text Highlighter Line Arrow End Arrow Start Arrow Both Rectangle Ellipse Triangle Right-Angled Triangle Five-Pointed Star Hexagon Pentagon Shape Recognition Eraser Insert file Screen clipping Colour picker More colours Object Fill Outline and Fill colour Thickness slider Colour palette Solid Line Dash Line Square Dot Line Transparency Gallery Applications (see below) Right-click Interactive Mouse Screen Annotation From the Applications tool, you can access the following: Reveal Spotlight Text Tools 60 Class Manager Control  Quick Collaborate Quick Vote Recorder View Calculator Web Browser Getting Started Getting Started Review the following topics to install and start using your Mimio Interactive. n Setting Up the Mimio InteractiveMouse n Setting Up the Mimio Interactive Bar n Setting Up Mimio Wireless n Setting Up Interactive Mode Setting Up the Mimio InteractiveMouse The Mimio Interactive Mouse is powered by a single AA battery. To set up the Mimio Interactive Mouse 1. Press down and slide off the battery compartment cover. 2. Insert one AA battery into the battery compartment. 3. Replace the battery compartment cover. Setting Up the Mimio Interactive Bar Mimio Interactive is powered through your computer using the included USB cable. Optionally, Mimio Interactive can be powered by four AA batteries. For information about using batteries to power the Mimio Interactive bar, see Inserting the Batteries. To set up the Mimio Interactive bar 1. Unfold the Mimio Interactive bar. 2. Plug the USB cable into the USB port on the Mimio Interactive bar. 61 Mimio Interactive 3. Plug the other end of the USB cable into an available USB port on your computer. 4. Place the Mimio Interactive bar along the left edge of the whiteboard as shown. The Mimio Interactive bar attaches to any whiteboard using the suction cups on the back of the bar. If the Mimio Interactive bar is to be used for extended periods of time or repeatedly in any one location, it should be attached using the brackets supplied. See Attaching the Mimio Capture Kit for information about mounting the bar using the brackets. Setting Up Mimio Wireless The Mimio Wireless module comes pre-linked to the wireless receiver provided. Mimio Interactive bar is powered by the power adaptor provided. Optionally, Mimio Interactive can be powered by four AA batteries. For information about using batteries to power the Mimio Interactive bar, see Inserting the Batteries. To set up Mimio Wireless 1. Press the release button on the back of the Mimio Interactive bar and then slide the link USB module down to remove. 62 Getting Started 2. Slide the Mimio Wireless module onto the Mimio Interactive bar. 3. Plug the power adaptor into the power connector on the bottom of the Mimio Interactive bar. 4. Plug the other end of the power adaptor into a power outlet. 5. Place the Mimio Interactive bar along the left edge of the whiteboard as shown. 63 Mimio Interactive The Mimio Interactive bar attaches to any whiteboard using the suction cups on the back of the bar. 6. Plug the wireless receiver into an available USB port on your computer. If the Mimio Interactive bar is to be used for extended periods of time or repeatedly in any one location, it should be attached using the brackets supplied. See Attaching the Mimio Capture Kit for information about mounting the bar using the brackets. Setting Up Interactive Mode Using MimioStudio Interactive mode, you can deliver lessons and presentations directly from your whiteboard. To use Interactive mode you need a projector, a Mimio Interactive-enabled whiteboard and a Mimio Interactive Mouse. Combined, these devices make for a powerful tool for delivering lessons and presentations. Projecting Your Desktop If you are presenting from a MimioStudio Notebook or another application, such as a PowerPoint presentation, you can open the application before or after Interactive mode is enabled and calibrated. To start Interactive mode 64 Getting Started 1. Project your desktop image onto your whiteboard. Refer to your projector’s documentation for instructions on how to project your desktop image. 2. Adjust the projected image so that there is a 2- to 3-inch buffer between the edge of your projection and your Mimio Interactive. 3. Click the Mimio Interactive Mouse anywhere on the whiteboard. Interactive mode starts and the calibration screen appears. To exit Interactive mode Do one of the following: l Press the Interactive button, l Start MimioStudio Tools, click Interactive and then click Exit. Start MimioStudio Preferences, select Interactive and then click Disable. l , twice on the Mimio Interactive bar. See Customizing MimioStudio for information on how to access MimioStudio Preferences. Calibrating Interactive Mode Each time Interactive mode is enabled, you are prompted to calibrate using the Mimio Interactive Mouse. When using a permanently installed whiteboard and projector, you do not need to recalibrate Interactive mode after the first session. See Adjusting the Interactive Preferences. To calibrate Interactive mode 1. If the calibration screen does not appear when you start Interactive mode, do one of the following: l Press the Interactive button, , on your Mimio Interactive bar. l Start MimioStudio Tools, click the Interactive button, Recalibrate. l Start MimioStudio Preferences, select Interactive and then click Calibrate. and then click 2. Press the Mimio Interactive Mouse down on the whiteboard at the centre of each of the nine calibration targets. Make sure to hold the stylus perpendicular to the writing surface as you click. The calibration target disappears and the next calibration target appears. When the calibration screen disappears, Interactive mode is enabled. 65 Mimio Interactive Using Mimio Interactive You can use the Mimio Interactive bar and stylus in MimioStudio Interactive mode to deliver lessons and presentations. In MimioStudio Interactive mode, you control the movement of the cursor on your screen with the Mimio Interactive mouse, much like you would with a mouse at your computer. You can also use the various presentation tools found in MimioStudio Tools to focus your audience on a specific area of the screen by displaying only certain parts of the screen. And you can annotate the screen with the drawing tools available in MimioStudio Tools using the Screen Annotation feature. Using the Mimio Interactive Mouse In Interactive mode, the Mimio Interactive Mouse can be used to control your desktop and interact with applications on your computer from your whiteboard. The following table describes how to use the Mimio Interactive Mouse to control your desktop from the whiteboard. To execute Do this Left mouse click Click in the projected area at the desired location with the tip of the Mimio Interactive mouse. Double left mouse click Quickly click twice in the projected area at the desired location with the tip of the Mimio Interactive mouse. 1. Hold the Mimio Interactive mouse at the desired location, staying as close to Right mouse click the whiteboard as possible without touching it. 2. Press the A (concave) button on the Mimio Interactive mouse. Hover 1. Hold the Mimio Interactive mouse at the desired location, staying as close to the whiteboard as possible without touching it. 2. Press the B (convex) button on the Mimio Interactive mouse. 3. Move the Mimio Interactive mouse to the desired location. 4. Release the B button on the Mimio Interactive mouse. To change the functions of the Mimio Interactive mouse buttons, see Adjusting the Interactive Preferences. Focusing Attention Using the Reveal and Spotlight Tools The Reveal tool and the Spotlight tool help you to focus your audience on a specific area of the screen by keeping parts of the screen hidden. Using the Reveal Tool The Reveal tool creates a shade that you can raise, lower, move left and move right over the screen image, as if you are moving a shade up, down or across the screen. You can then expose bullet points or other information progressively. 66 Using Mimio Interactive To use the Reveal tool Do one of the following: l From MimioStudio Tools, click the Applications button Reveal. l (Interactive mode only) Press the Resize window button, Interactive bar. and then choose , on the Mimio To adjust the revealed area Click inside the shaded area and drag down, up, left, or right to reveal more or less of the displayed area. To adjust the transparency of the Reveal tool 1. Click and then point to Transparent. 2. From the Transparent list, choose a percentage. A transparency of 0% means that the shaded area will be completely opaque. Using the Spotlight Tool The Spotlight tool masks the entire screen except for a small area, the spotlight. You can then focus audience attention on a specific area of the screen. The spotlight area can be reshaped, resized and moved around the screen. 67 Mimio Interactive To use the Spotlight tool 1. Do one of the following: l From MimioStudio Tools, click the Applications button, Spotlight. l (Interactive mode only) Press the Print page button, bar. , and then choose , on the Mimio Interactive 2. Click the shaded area outside of the spotlight border and drag the spotlight to the desired location. To adjust the shape of the spotlight 1. Click and then point to Shape. 2. From the Shape list, choose a shape for the spotlight. To resize the spotlight 1. Click and then point to Size. 2. From the Size list, choose a spotlight size. You can also resize the spotlight by dragging the coloured border of the spotlight until the spotlight is the desired size. To adjust the spotlight transparency 1. Click and then point to Transparent. 2. From the Transparent list, choose a transparency percentage. A transparency of 0% means that the shaded area will be completely opaque. Marking Up the Display Using Screen Annotations Screen Annotation mode allows you to annotate applications, web pages and images. When in Annotation mode, a green border with a faded edge appears around your desktop. When you exit from Screen Annotation mode, all annotations are cleared from the whiteboard and automatically archived in the Screen Annotations folder in MimioStudio Gallery. Enabling Screen Annotation Mode To enable Screen Annotation mode 68 Using Mimio Interactive 1. Do one of the following l From MimioStudio Tools, click the Screen Annotation button, current desktop image. l (Interactive mode Only) Press the Copy page button, Interactive bar. , to freeze your , on the Mimio A green border with a faded edge appears around your desktop. 2. Annotate the screen using MimioStudio Tools. All object, drawing and manipulation features in MimioStudio Tools are available in Screen Annotation mode. To exit Screen Annotation mode Do one of the following: l From MimioStudio Tools, click the Mouse button, l (Interactive mode Only) Press the Copy page button, Interactive bar. , to “unfreeze” the screen. , on the Mimio To disable the Annotation mode border 1. Click  on the menu bar and choose Preferences. 2. Select Notebook from the MimioStudio Preferences dialog box. 3. Under General, clear the Enable fullscreen border (Screen Annotation only) check box. 4. Click OK to save the preferences. Annotating the Screen Using MimioStudio Tools MimioStudio Tools are used to annotate the screen. All object, drawing, and manipulation features in MimioStudio Tools are available in Screen Annotation mode. Once you select a given drawing tool it remains selected until you select another drawing tool or the selection tool. See Manipulating Objects for a complete description of manipulating objects. All of the functions and features of the MimioStudio drawing tools that are available in MimioStudio Notebook are available in Screen Annotation mode. To use the freehand pen 1. Click the Pen button, . 2. (Optional) To adjust the line width, drag the Thickness slider. 3. (Optional) To adjust the line colour, do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. Click and then select a colour from the desktop. 4. (Optional) To adjust the transparency of the line, click the Transparency button, and then choose a transparency percentage. l , 5. Place the cursor where you want the ink stroke to start on the page. 6. Drag the cursor to draw ink strokes. To use the freehand brush 69 Mimio Interactive 1. Click the Brush button, . 2. (Optional) To adjust the line width, drag the Thickness slider. 3. (Optional) To adjust the line colour, do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. Click and then select a colour from the desktop. 4. (Optional) To adjust the transparency of the line, click the Transparency button, and then choose a transparency percentage. l , 5. Place the cursor where you want the brush stroke to start on the page. 6. Drag the cursor to draw brush strokes. To highlight a portion of the display 1. Click the Highlighter button, . 2. (Optional) To adjust the highlighter width, drag the Thickness slider. 3. (Optional) To change the colour, do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. l Click and then select a colour from the desktop. 4. Place the cursor where you want the highlight stroke to start on the page. 5. Drag the cursor over the area you want to highlight. To erase ink and highlighting 1. Click the Eraser button, . 2. (Optional) To adjust the eraser width, drag the Thickness slider. 3. Drag the cursor over the ink or highlighter strokes you want to erase. To add a line or shape 1. Click the line type or shape you want to add. 2. (Optional) To adjust the line or outline width, drag the Thickness slider. 3. (Optional) To change the line or outline colour, select the Outline Colour box and then do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. l Click and then select a colour from the desktop. 4. (Optional) To adjust the fill colour, select the Fill Colour box and then do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. l Click and then select a colour from the desktop. 5. To change the line or outline style, click l l 70 Solid Dash and choose one of the following: Using Mimio Interactive Square Dot 6. (Optional) To adjust the transparency of the line or shape, click the Transparency button, and then choose a transparency percentage. 7. Place the cursor where you want the line or shape to start on the page. l 8. Drag the cursor to draw the line or shape. To add formatted text 1. Click the Text button, . 2. Place the cursor where you want the text to start on the page. For a fixed width text box, place the cursor where you want the text box to start on the page and then drag to the desired width. 3. Select a font style, size, colour and an alignment option for the text. 4. Enter text in the text box. To draw a shape 1. Click the Shape Recognition button, . 2. (Optional) To adjust the outline width, drag the Thickness slider. 3. (Optional) To change the outline colour, select the Outline Colour box and then do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. l Click and then select a colour from the desktop. 4. (Optional) To adjust the fill colour, select the Fill Colour box and then do one of the following: l Select a colour from the Colour Palette. l Click and then select a colour from the Colour dialog box. l Click and then select a colour from the desktop. 5. To change the line or outline style, click l Solid Dash l Square Dot l and choose one of the following: 6. (Optional) To adjust the transparency of the shape, click the Transparency button, and then choose a transparency percentage. 7. Place the cursor where you want the shape to start on the page. 8. Drag the cursor to draw the shape. The Shape Recognition tool can be used to draw circles, ellipses, triangles, rectangles, squares and lines. Clearing All Annotations from the Display When you exit Screen Annotation mode, all annotations are cleared from the display and all annotations are automatically preserved as a snapshot of the display. See Working with Saved Annotation Snapshots for information about reviewing and using the snapshots. 71 Mimio Interactive Inserting Text Into an Application Using MimioStudio Text Tools You can enter text into any text-entry box or page using the MimioStudio Text Tools. The Text Tool has three modes for entering text: n On-Screen Keyboard allows you to enter text through an on-screen keyboard application. n Writing Pad allows you to enter text through a small on-screen writing pad. Your handwriting is automatically converted into text and input into the current application. In addition, Writing Pad also supportsgesture recognition, which allows handwritten shortcuts to be automatically recognised as commonly used keys. Gesture recognition is only supported on Intel-based systems. To access MimioStudio Text Tools 1. From MimioStudio Tools, click the Applications button, Tools. , followed by Text 2. Click the Text Tools icon  or  on the menu bar. 3. Choose the Text Tool that you want to use. l Keyboard to enable the On-Screen Keyboard. l Writing Pad to enable Writing Pad. To disable MimioStudio Text Tools Do one of the following: l Click the Text Tools icon selected Text Tool.  or  on the menu bar and then choose the currently l From MimioStudio Tools, click the Applications button, Tools. , followed by Text Using the On-Screen Keyboard You can enter text into any application using the On-Screen Keyboard. To use the On-Screen Keyboard 1. Start the On-Screen Keyboard. 2. Click in the text-entry box or on the page where you want to enter the text. 3. Using your mouse or Mimio Interactive Mouse, press the virtual keys on the on-screen keyboard. The text is entered into the text-entry box or on the page that you selected. Using Writing Pad With Writing Pad you can enter text by means of a small, on-screen writing pad using the Mimio Interactive mouse while in Interactive mode. You can also use Writing Pad with your mouse or other input device from your computer. To use Writing Pad 1. Start Writing Pad. The on-screen writing pad appears. 2. Click in the text-entry box or on the page where you want to enter the text. 72 Using Mimio Interactive 3. Using your mouse or Mimio Interactive Mouse, write within the yellow space of the on-screen writing pad. Your handwriting is automatically converted to text and entered into the textentry box or on the page that you selected. 4. Use the on-screen buttons for commonly used keys. Button Description Backspace Enter Tab Space Writing Pad also supports gesture recognition for commonly used keys. See Using Gesture Recognition. Using Gesture Recognition With gesture recognition, handwritten shortcuts are automatically recognised as commonly used keys. Writing Pad supports gesture recognition. Gesture recognition is only supported on Intel-based systems. The following table describes how to use gestures to perform common functions. To press Do this Backspace Draw a line from right to left. Enter Draw a connected line from top to bottom and then from right to left. Tab Space bar Draw a connected line from bottom to top and then from left to right. Draw a connected line from top to bottom and then from left to right. 73 Mimio Interactive Using the Web Browser and Calculator Tools MimioStudio Tools includes shortcuts for accessing a Web browser and a calculator. To use the tools 1. Start MimioStudio Tools. 2. Click the Applications button, following tools: l  Calculator l  Web Browser , choose More Tools and then choose one of the Recording Desktop Actions and Audio in Interactive Mode Using MimioStudio Recorder, you can record your interactions into an MP4 movie file, with or without audio. See Using MimioStudio Recorder for more information on how to use MimioStudio Recorder. Caring for Mimio Interactive Refer to the following topics for information about cleaning, inserting the batteries and permanently attaching your Mimio Interactive. n Cleaning Mimio Interactive n Inserting the Batteries n Attaching Mimio Interactive Permanently Cleaning Mimio Interactive Mimio Interactive is designed to give you long and trouble-free service while requiring very little maintenance. You can easily clean your Mimio Interactive using the following items: n Lint-free cloth. n Isopropyl alcohol, diluted dishwashing detergent or diluted glass cleaner. If you use glass cleaner make sure it does not contain ammonia. To clean the Mimio Interactive bar and Mouse 1. If necessary, disconnect the USB cable from the Mimio Interactive bar. 2. Use the lint-free cloth to wipe the exterior of the Mimio Interactive bar and Mouse. 3. Remove dirt and smudges with one of the cleaning solutions mentioned above. Avoid using liquids on any exposed charging contacts. Do not allow liquid into any openings on the equipment. 4. Reconnect the USB cable. Inserting the Batteries Mimio Interactive is powered using the included USB cable and power adapter. Optionally, Mimio Interactive can be powered by four AA batteries. To insert the batteries 74 Caring for Mimio Interactive 1. Press down and slide off the battery compartment cover. 2. Insert four AA batteries into the battery compartment. 3. Replace the battery compartment cover. Remove the batteries if the Mimio Interactive bar will not be used for a long period of time. Attaching Mimio Interactive Permanently The Mimio Interactive bar attaches to any whiteboard using the suction cups on the back of the bar. If the Mimio Interactive bar is to be used for extended periods of time or repeatedly in any one location, it should be attached using the brackets supplied. To attach Mimio Interactive permanently 1. Snap the mounting brackets over the suction cups on the back of the Mimio Interactive bar. Make sure that the brackets clip into the recesses on the sides of the Mimio Interactive bar. 2. Remove the paper backing from the adhesive strips to expose the adhesive. 3. Press the Mimio Interactive bar firmly along the top left edge of the whiteboard as 75 Mimio Interactive shown. 76 Chapter 5 MimioCapture (Model Number: ICD10) MimioCapture is used with a MimioTeach-enabled whiteboard to record notes and drawings from your whiteboard. Using MimioStudio Ink Capture mode, you make notes and drawings on your whiteboard using the MimioCapture pens. Your notes are automatically captured in a MimioStudio Notebook. What's Included The MimioCapture package contains the following items: 1 MimioCapture charging tray 4 MimioCapture eraser 2 MimioCapture pens (4) 5 Expo dry erase markers (4) 3 Mounting plates 6 Magnetic pen holder If you are missing any of the items above, contact Customer Support. 77 MimioCapture (Model Number: ICD10) About MimioCapture MimioCapture includes four pens and one eraser for making notes on your MimioTeachenabled whiteboard. The MimioCapture charging tray is used to charge the pens and eraser. The MimioCapture pen holder attaches to your whiteboard and is used to store the pens and eraser. The following figure shows the major components of MimioCapture. 1 Power cord 4 MimioCapture pens 2 MimioCapture charging tray 5 Status lights 3 MimioCapture eraser 6 Magnetic pen holder Status Lights The status lights visually show the status of each MimioCapture pen and the MimioCapture eraser. Off The MimioCapture pen or eraser is not receiving power. The status light is off when the pen or eraser is in use. Amber The MimioCapture pen or eraser has a low battery. The battery should be recharged. Solid Green The MimioCapture pen or eraser is charging. About MimioStudio Notebook As you make notes on your whiteboard using MimioCapture you can automatically save those notes to MimioStudio Notebook. Once the information is in Notebook you can save the Notebook as a MimioStudio INK file or a variety of other formats. For more information about using MimioStudio Notebook, see Working with MimioStudio . 78 Getting Started Getting Started MimioCapture seamlessly integrates with your MimioTeach and MimioStudio software. Before you can begin capturing digital ink, you must first set up your MimioCapture pens, MimioCapture eraser and MimioStudio Notebook. Setting Up the MimioCapture Charging Tray The MimioCapture charging tray is powered through your computer. Optionally, the MimioCapture charging tray can be powered using a USB power adapter. To connect the power 1. Place the charging tray on a flat surface. 2. Plug the power cable into an available USB port on your computer. Setting Up the Pen Holder The MimioCapture pen holder holds the MimioCapture pens and eraser for easy access. The bar attaches securely to any magnetic whiteboard. To attach to a non-magnetic whiteboard 1. Place the pen holder in the desired location on the whiteboard as shown. The MimioCapture pen holder attaches securely to any magnetic whiteboard. See Attaching the Pen Holder to a Non-Magnetic Whiteboard for information about attaching the pen holder to a non-magnetic whiteboard. 79 MimioCapture (Model Number: ICD10) 2. Place the MimioCapture pens and eraser in the pen holder as shown. Setting Up the MimioCapture Pens MimioCapture comes with four coloured MimioCapture pens and four Expo® dry erase markers. Before you can start using MimioCapture you must first set up your MimioCapture pens. The MimioCapture pens are each powered by a rechargeable lithium-ion battery. The pens charge whenever they are docked on the MimioCapture charging tray. To set up the MimioCapture pens 1. Pull the plastic strip from the top part of the pen to activate the rechargeable battery. 2. Press the button on the side of the pen and pull the top part of the pen from the pen body. 3. Insert a coloured Expo® dry erase marker into the matching coloured pen body. 80 Getting Started 4. Replace the top part of the pen onto the pen body. 5. Place the pen cap onto the pen. Setting Up the MimioCapture Eraser The MimioCapture eraser is powered by a rechargeable lithium-ion battery. The eraser charges whenever the eraser is docked on the MimioCapture charging tray. To set up the MimioCapture eraser Pull the plastic strip from the top part of the eraser to activate the rechargeable battery. 81 MimioCapture (Model Number: ICD10) Charging the Pens and Eraser The MimioCapture pens and MimioCapture eraser recharge quickly whenever they are docked on the MimioCapture charging tray. Charge the pens and eraser for a full 24 hours before using for the first time. To charge the pens and eraser Place each pen and the eraser into the appropriate part of the MimioCapture charging tray. The status lights are continuously green when the pen or eraser is charging. Setting Up MimioStudio Notebook for Capture To begin capturing digital ink, you must first do the following: n Set the size of your whiteboard in MimioStudio Preferences. n Start MimioStudio Ink Capture mode. Setting the Whiteboard Size Before you begin capturing digital ink you must first set the size of your whiteboard in MimioStudio Preferences. The default size is 96 inches by 48 inches. To set the whiteboard size for a MimioCapture device 1. Click and then choose Preferences. The MimioStudio Preferences dialog box appears. 2. Click Ink Capture. 3. If you have more than one MimioTeach bar connected to your computer, from the Device list choose the device for which you wish to change the size. 4. Do one of the following: 82 l Choose a size from the Surface Size list. l Choose Custom from the Surface Size list and enter the desired values into the Width and Height boxes. Using MimioCapture l Click Auto Size and touch a MimioCapture pen to the whiteboard at the location shown in the Auto Size dialog box. Starting Ink Capture Mode Using MimioStudio Ink Capture mode, you can make notes on your whiteboard and instantaneously capture them into a MimioStudio Notebook. To start Ink Capture mode Touch the tip of any MimioCapture pen to the whiteboard. A new Notebook opens automatically for capturing your notes. Using MimioCapture MimioCapture can be used along with MimioTeach, without a projector, to record notes and drawings from your whiteboard. This is called capturing digital ink. Capturing Digital Ink When using Ink Capture mode, your notes are automatically captured in a MimioStudio Notebook. You can use the buttons on the MimioTeach bar to insert a new Notebook page or insert a copy of the current page into Notebook. To capture digital ink 1. If your MimioTeach bar is not on, turn on your MimioTeach bar. 2. Write or draw on your whiteboard using the MimioCapture pens. A new Notebook automatically opens on the connected computer and begins capturing digital ink. 3. Add and copy pages as desired using the buttons on the MimioTeach bar. Writing and Drawing Digital Ink In Ink Capture mode, the MimioCapture pens and the MimioCapture eraser are used to draw and erase ink on your whiteboard. By default, the colour recorded matches the colour of the MimioCapture pen, regardless of the colour of the marker that is inserted. The MimioTeach stylus is for use with Interactive mode only. The stylus does not work with Ink Capture mode. To draw digital ink 1. Choose one of the coloured MimioCapture pens. 2. Draw on the whiteboard with the pen. Keep the pen within 15 degrees of its perpendicular position to the whiteboard to 83 MimioCapture (Model Number: ICD10) ensure that the data is accurately captured. To erase digital ink Erase the ink from the whiteboard using the MimioCapture eraser. Keep the eraser surface flat against the whiteboard to ensure that the data is accurately erased. Adding and Copying Notebook Pages Using the Launch button on the MimioTeach bar, you can insert a new Notebook page or insert a copy of the current page into Notebook. The following figure shows the Launch button on the MimioTeach bar. To add a page 84 Caring for MimioCapture 1. Press the Launch button, , on the MimioTeach bar. The MimioTeach bar beeps and a new page is added to the Notebook. To copy a page 1. Press and hold the Launch button, , on the MimioTeach bar. 2. When you hear two beeps, release the button. A copy of the current page is added to the Notebook. Caring for MimioCapture Review the following topics for information about cleaning MimioCapture and attaching the MimioCapture pen holder to a non-magnetic whiteboard. n Cleaning MimioCapture n Attaching the Pen Holder to a Non-Magnetic Whiteboard Cleaning MimioCapture MimioCaptureis designed to give you long and trouble-free service while requiring very little maintenance. You can easily clean your MimioCapture using the following items: n Lint-free cloth. n Isopropyl alcohol, diluted dishwashing detergent or diluted glass cleaner. If you use glass cleaner make sure it does not contain ammonia. To clean the MimioCapture 1. Disconnect the charging tray power cable. 2. Use the lint-free cloth to wipe the exterior of the MimioCapture charging tray, pen holder, pens, and eraser. 3. Remove dirt and smudges with one of the cleaning solutions mentioned above. Avoid using liquids on any exposed charging contacts. Do not allow liquid into any openings on the equipment. 4. Reconnect the power cable. Attaching the Pen Holder to a Non-Magnetic Whiteboard The MimioCapture pen holder attaches securely to any magnetic whiteboard. If you do not have a magnetic whiteboard, you can attach the MimioCapture pen holder to your whiteboard using the included metal plates. To attach the pen holder to a non-magnetic whiteboard 85 MimioCapture (Model Number: ICD10) 1. Place the metal plates against the back of the pen holder as shown. Make sure that the recess on each plate is inserted into the recess on the back of the pen holder. 2. Remove the paper backing from the adhesive strips to expose the adhesive. 3. Press the pen holder firmly against the whiteboard as shown and hold for 20 seconds. 4. Remove the pen holder from the whiteboard. The metal plates remain attached to the whiteboard. 5. Press each plate firmly against the whiteboard for 30 seconds. 86 Caring for MimioCapture 6. Let stand for at least one hour, and then place the pen holder on the magnetic plates as shown. 7. Place the MimioCapture pens and eraser in the pen holder as shown. 87 This page intentionally left blank for double-sided printing. 88 Chapter 6 MimioCapture (Model Number: ICD04) MimioCapture is used with a MimioTeach-enabled whiteboard to record notes and drawings from your whiteboard. Using MimioStudio Ink Capture mode, you make notes and drawings on your whiteboard using the MimioCapture pens. Your notes are automatically captured in a MimioStudio Notebook. What's Included The MimioCapture package contains the following items: 1 MimioCapture tray 4 Mounting plates 2 Expo dry erase markers (4) 5 Connector bar 3 MimioCapture pens (4) 6 MimioCapture eraser If you are missing any of the items above, contact Customer Support. 89 MimioCapture (Model Number: ICD04) About MimioCapture MimioCapture includes four pens and one eraser for making notes on your MimioTeachenabled whiteboard. The MimioCapture tray is used to store and charge the pens and eraser. You can also perform some common actions using the buttons on the MimioCapture tray. The following figure shows the major components of MimioCapture. 1 Connector bar port 4 Capture buttons 2 MimioCapture eraser 5 Status lights 3 MimioCapture pens 6 Charging tray Status Lights The status lights visually show the status of each MimioCapture pen and the MimioCapture eraser. Off The MimioCapture pen or eraser is not receiving power. The status light is off when the pen or eraser is in use. Amber The MimioCapture pen or eraser has a low battery. The battery should be recharged. Solid Green The MimioCapture pen or eraser is charging. About MimioStudio Notebook As you make notes on your whiteboard using MimioCapture you can automatically save those notes to MimioStudio Notebook. Once the information is in Notebook you can save the Notebook as a MimioStudio INK file or a variety of other formats. For more information about using MimioStudio Notebook, see Working with MimioStudio Notebook. 90 Getting Started Getting Started MimioCapture links directly to your MimioTeach for seamless integration with MimioStudio software. Before you can begin capturing digital ink, you must first set up your MimioCapture tray, MimioCapture pens, MimioCapture eraser and MimioStudio Notebook. Setting Up the MimioCapture Tray The MimioCapture tray is powered using the USB cable and power adaptor that were included with your MimioTeach. The MimioTeach bar connects to the MimioCapture tray using the connector bar that was included with your MimioCapture. To connect 1. Remove the MimioTeach bar from the whiteboard. 2. Unplug the USB cable from the MimioTeach bar. 3. Plug the USB cable into the USB port on the MimioCapture tray. 4. Place the MimioCapture tray along the bottom-left edge of the whiteboard as shown. The MimioCapture tray attaches securely to any magnetic whiteboard. See Attaching MimioCapture to a Non-Magnetic Whiteboard for information about attaching the tray to a non-magnetic whiteboard. 5. Connect the connector bar to the MimioCapture tray as shown. 91 MimioCapture (Model Number: ICD04) 6. Connect the other end of the connector bar to the MimioTeach bar as shown. 7. Reattach the MimioTeach bar along the left side of the whiteboard. Setting Up the MimioCapture Pens MimioCapture comes with four coloured MimioCapture pens and four Expo® dry erase markers. Before you can start using MimioCapture you must first set up your MimioCapture pens. The MimioCapture pens are each powered by a rechargeable lithium-ion battery. The pens charge whenever they are docked on the MimioCapture tray. To set up the MimioCapture pens 1. Pull the plastic strip from the top part of the pen to activate the rechargeable battery. 2. Press the button on the side of the pen and pull the top part of the pen from the pen body. 92 Getting Started 3. Insert a coloured Expo® dry erase marker into the matching coloured pen body. 4. Replace the top part of the pen onto the pen body. 5. Place the pen cap onto the pen. Setting Up the MimioCapture Eraser The MimioCapture eraser is powered by a rechargeable lithium-ion battery. The eraser charges whenever the eraser is docked on the MimioCapture tray. To set up the MimioCapture eraser 93 MimioCapture (Model Number: ICD04) Pull the plastic strip from the top part of the eraser to activate the rechargeable battery. Charging the Pens and Eraser The MimioCapture pens and MimioCapture eraser recharge quickly whenever they are docked on the MimioCapture tray. To charge the pens and eraser Place each pen and the eraser into the appropriate part of the MimioCapture tray. The status lights are continuously green when the pen or eraser is charging. Setting Up MimioStudio Notebook for Capture To begin capturing digital ink, you must first do the following: n Set the size of your whiteboard in MimioStudio Preferences. n Start MimioStudio Ink Capture mode. Setting the Whiteboard Size Before you begin capturing digital ink you must first set the size of your whiteboard in MimioStudio Preferences. The default size is 96 inches by 48 inches. To set the whiteboard size for a MimioCapture device 1. Click and then choose Preferences. The MimioStudio Preferences dialog box appears. 2. Click Ink Capture. 3. If you have more than one MimioTeach bar connected to your computer, from the Device list choose the device for which you wish to change the size. 4. Do one of the following: 94 l Choose a size from the Surface Size list. l Choose Custom from the Surface Size list and enter the desired values into the Width and Height boxes. Using MimioCapture l Click Auto Size and touch a MimioCapture pen to the whiteboard at the location shown in the Auto Size dialog box. Starting Ink Capture Mode Using MimioStudio Ink Capture mode, you can make notes on your whiteboard and instantaneously capture them into a MimioStudio Notebook. To start Ink Capture mode Touch the tip of any MimioCapture pen to the whiteboard. A new Notebook opens automatically for capturing your notes. Using MimioCapture MimioCapture can be used along with MimioTeach, without a projector, to record notes and drawings from your whiteboard. This is called capturing digital ink. Capturing Digital Ink When using Ink Capture mode, your notes are automatically captured in a MimioStudio Notebook. You can use the buttons on the MimioCapture tray to insert a new Notebook page, insert a copy of the current page into Notebook or print the current Notebook page. To capture digital ink 1. If your MimioTeach bar is not on, turn on your MimioTeach bar. 2. Write or draw on your whiteboard using the MimioCapture pens. A new Notebook automatically opens on the connected computer and begins capturing digital ink. 3. Add, copy and print pages as desired using the buttons on the MimioCapture tray. Writing and Drawing Digital Ink In Ink Capture mode, the MimioCapture pens and the MimioCapture eraser are used to draw and erase ink on your whiteboard. By default, the colour recorded matches the colour of the MimioCapture pen, regardless of the colour of the marker that is inserted. The MimioTeach stylus is for use with Interactive mode only. The stylus does not work with Ink Capture mode. To draw digital ink 1. Choose one of the coloured MimioCapture pens. 2. Draw on the whiteboard with the pen. Keep the pen within 15 degrees of its perpendicular position to the whiteboard to 95 MimioCapture (Model Number: ICD04) ensure that the data is accurately captured. To erase digital ink Erase the ink from the whiteboard using the MimioCapture eraser. Keep the eraser surface flat against the whiteboard to ensure that the data is accurately erased. Adding, Copying, and Printing Notebook Pages When using MimioStudio in Capture mode, you can insert a new Notebook page, insert a copy of the current page into Notebook, or print the current Notebook page. Using the MimioCapture Bar to Add, Copy, and Print Notebook Pages The buttons on the MimioCapture tray can be used to easily access features directly from your whiteboard. Using the buttons on the MimioCapture tray you can insert a new Notebook page, insert a copy of the current page into Notebook or print the current Notebook page. The following figure shows the MimioCapture tray buttons. The following table describes the functions of the MimioCapture tray buttons. 96 New page Inserts a new page into MimioStudio Notebook. Copy page Inserts a duplicate of the current page into MimioStudio Notebook. Print page Prints the current page. Caring for MimioCapture Using the MimioTeach Bar to Add and Copy Notebook Pages Using the Launch button on the MimioTeach bar, you can insert a new Notebook page or insert a copy of the current page into Notebook. The following figure shows the Launch button on the MimioTeach bar. To add a page 1. Press the Launch button, , on the MimioTeach bar. The MimioTeach bar beeps and a new page is added to the Notebook. To copy a page 1. Press and hold the Launch button, , on the MimioTeach bar. 2. When you hear two beeps, release the button. A copy of the current page is added to the Notebook. Caring for MimioCapture Review the following topics for information about cleaning, storing and attaching your MimioCapture to a non-magnetic whiteboard. n Cleaning MimioCapture n Attaching MimioCapture to a Non-Magnetic Whiteboard Cleaning MimioCapture MimioCaptureis designed to give you long and trouble-free service while requiring very little maintenance. 97 MimioCapture (Model Number: ICD04) You can easily clean your MimioCapture using the following items: n Lint-free cloth. n Isopropyl alcohol, diluted dishwashing detergent or diluted glass cleaner. If you use glass cleaner make sure it does not contain ammonia. To clean the MimioCapture 1. Disconnect the power cable and the connector bar. 2. Use the lint-free cloth to wipe the exterior of the MimioCapture tray, pens and eraser. 3. Remove dirt and smudges with one of the cleaning solutions mentioned above. Avoid using liquids on any exposed charging contacts. Do not allow liquid into any openings on the equipment. 4. Reconnect the power cable and the connector bar. Attaching MimioCapture to a Non-Magnetic Whiteboard The MimioCapture tray attaches securely to any magnetic whiteboard. If you do not have a magnetic whiteboard, you can attach the MimioCapture tray to your whiteboard using the metal plates provided. To attach MimioCapture to a non-magnetic whiteboard 1. Place the metal plates against the back of the MimioCapture tray as shown. Make sure that the recess on each plate is inserted into the recess on the back of the MimioCapture tray. 2. Remove the paper backing from the adhesive strips to expose the adhesive. 3. Press the MimioCapture tray firmly along the bottom-left edge of the whiteboard as shown. 98 Chapter 7 Mimio Capture Kit Mimio Capture Kit is used with a Mimio Interactive-enabled whiteboard to record notes and drawings from your whiteboard. Using MimioStudio Ink Capture mode, you make notes and drawings on your whiteboard using the Mimio Capture Kit pens. Your notes are automatically captured in a MimioStudio Notebook. What's Included The Mimio Capture Kit package contains the following items: 1 Mimio Capture Kit pens (4) 6 Mimio Capture Kit pen holder 2 Mimio Capture Kit eraser 7 Mimio Capture Kit eraser holder 3 Expo markers (4) 8 N-Cell batteries (4) 4 Colour caps (8) 9 AAA battery 5 Mimio Capture Kit pen caps (4) If you are missing any of the items above, contact Customer Support. About Mimio Capture Kit Mimio Capture Kit includes four pens and one eraser for making notes on your Mimio Interactive-enabled whiteboard. The pen holder and eraser holder are used to store the pens 99 Mimio Capture Kit and eraser. The following figure shows the major components of Mimio Capture Kit. 1 Mimio Capture Kit eraser 3 Mimio Capture Kit pens 2 Mimio Capture Kit eraser holder 4 Mimio Capture Kit pen holder About MimioStudio Notebook As you make notes on your whiteboard using Mimio Capture Kit you can automatically save those notes to MimioStudio Notebook. Once the information is in Notebook you can save the Notebook as a MimioStudio INK file or a variety of other formats. Your Mimio Interactive bar can capture and store ink while disconnected from your computer. See Downloading Digital Ink for more information about capturing and downloading digital ink for an offline session. For more information about using MimioStudio Notebook, see Working with MimioStudio Notebook. Getting Started Mimio Capture Kit links directly to your Mimio Interactive for seamless integration with MimioStudio software. Before you can begin capturing digital ink, you must first set up your Mimio Capture Kit pens, Mimio Capture Kit eraser and MimioStudio Notebook. Setting Up the Mimio Capture Kit Pens Mimio Capture Kit comes with four Mimio Capture Kit pens, four Expo® dry erase markers and eight colour caps. Before you can start using Mimio Capture Kit you must first set up your Mimio Capture Kit pens. The Mimio Capture Kit pens are each powered by one N-cell battery. To set up the Mimio Capture Kit pens 1. Gently turn and pull the top part of the Mimio Capture Kit pen to separate the top part of the pen from the pen body. 100 Getting Started 2. Press the coloured nodes on each side of the pen and pull to remove the colour cap. 3. Insert one N-cell battery into the Mimio Capture Kit pen. 4. Replace the colour cap making sure to align the spring on the colour cap with the battery. 5. Insert an Expo® dry erase marker that matches the colour of the colour cap into the pen body. 6. Align the arrow on the pen body with the arrow on the top part of the pen. 101 Mimio Capture Kit 7. Push the two parts of the pen together and then twist to lock in place. 8. Place the pen cap onto the pen. Setting Up the Mimio Capture Kit Eraser The Mimio Capture Kit eraser is powered by a single AAA battery. To set up the Mimio Capture Kit eraser 1. Gently press both sides of the eraser and lift to remove the battery compartment cover. 2. Insert the battery into the battery compartment. 102 Getting Started 3. Replace the battery compartment cover. Setting Up MimioStudio Notebook for Capture To begin capturing digital ink, you must first do the following: n Set the size of your whiteboard in MimioStudio Preferences. n Start MimioStudio Ink Capture mode. Setting the Whiteboard Size Before you begin capturing digital ink you must first set the size of your whiteboard in MimioStudio Preferences. The default size is 96 inches by 48 inches. To set the whiteboard size for a Mimio Interactive device 1. Click and then choose Preferences. The MimioStudio Preferences dialog box appears. 2. Click Ink Capture. 3. If you have more than one Mimio Interactive bar connected to your computer, from the Device list choose the device for which you wish to change the size. 4. Do one of the following: l Choose a size from the Surface Size list. l Choose Custom from the Surface Size list and enter the desired values into the Width and Height boxes. l Click Auto Size and touch a Mimio Capture Kit pen to the whiteboard at the location shown in the Auto Size dialog box. Starting Ink Capture Mode Using MimioStudio Ink Capture mode, you can make notes on your whiteboard and instantaneously capture them into a MimioStudio Notebook. Your Mimio Interactive bar can capture and store ink while disconnected from your computer. However you need to supply power to your Mimio Interactive bar using batteries or a wall adaptor. See Downloading Digital Ink for more information about capturing and downloading digital ink for an offline session. 103 Mimio Capture Kit To start Ink Capture mode Touch the tip of any Mimio Capture Kit pen to the whiteboard. A new Notebook opens automatically for capturing your notes. Using Mimio Capture Kit Mimio Capture Kit can be used along with Mimio Interactive, without a projector, to record notes and drawings from your whiteboard. This is called capturing digital ink. Capturing Digital Ink When using Ink Capture mode, your notes are automatically captured in a MimioStudio Notebook. You can use the buttons on the Mimio Interactive bar to insert a new Notebook page, insert a copy of the current page into Notebook or print the current Notebook page. Your Mimio Interactive bar can capture and store ink while disconnected from your computer. See Downloading Digital Ink for more information about capturing and downloading digital ink for an offline session. To capture digital ink 1. If your Mimio Interactive bar is not on, turn on your Mimio Interactive bar. 2. Write or draw on your whiteboard using the Mimio Capture Kit pens. A new Notebook automatically opens on the connected computer and begins capturing digital ink. 3. Add, copy and print pages as desired using the buttons on the Mimio Interactive bar. Writing and Drawing Digital Ink In Ink Capture mode, the Mimio Capture Kit pens and the Mimio Capture Kit eraser are used to draw and erase ink on your whiteboard. By default, the colour recorded matches the colour of the colour cap on the Mimio Capture Kit pen, regardless of the colour of the marker that is inserted. The Mimio Interactive Mouse is for use with Interactive mode only. The Mouse does not work with Ink Capture mode. To draw digital ink 1. Choose one of the Mimio Capture Kit pens. 2. Draw on the whiteboard with the pen. Keep the pen within 15 degrees of its perpendicular position to the whiteboard to 104 Using Mimio Capture Kit ensure that the data is accurately captured. To erase digital ink Erase the ink from the whiteboard using the Mimio Capture Kit eraser. Keep the eraser surface flat against the whiteboard to ensure that the data is accurately erased. Adding, Copying, and Printing Notebook Pages When using Ink Capture mode, the buttons on the Mimio Interactive bar can be used to easily access features directly from your whiteboard. Using the buttons on the Mimio Interactive bar you can insert a new Notebook page, insert a copy of the current page into Notebook or print the current Notebook page. The following figure shows the Mimio Interactive bar buttons. The following table describes the functions of the Mimio Interactive bar buttons. 105 Mimio Capture Kit New page Inserts a new page into MimioStudio Notebook. Copy page Inserts a duplicate of the current page into MimioStudio Notebook. Print page Prints the current page. Resize window Minimises or Maximises the MimioStudio Notebook window. Interactive Exits Ink Capture mode and starts Interactive mode. Downloading Digital Ink You can use your Mimio Interactive bar to record and save Digital Ink even when not connected to your computer. You can then download the Digital Ink to MimioStudio Notebook for printing, distributing or editing. When your Mimio Interactive bar is not connected to your computer through the USB cable, the Mimio Interactive bar must be powered by batteries or a power adaptor. To download digital ink 1. Connect the Mimio Interactive bar to your computer. 2. Do one of the following: l If configured to automatically download digital ink (default), open a new MimioStudio Notebook. The ink download process begins automatically. l If configured to manually download digital ink, open a new MimioStudio Notebook and double-click Download Ink on the status bar. Caring for Mimio Capture Kit Review the following topics for information about cleaning, storing and mounting your Mimio Capture Kit. n Cleaning the Mimio Capture Kit n Attaching the Mimio Capture Kit Cleaning the Mimio Capture Kit Mimio Capture Kit is designed to give you long and trouble-free service while requiring very little maintenance. You can easily clean your Mimio Capture Kit using the following items: n Lint-free cloth. n Isopropyl alcohol, diluted dishwashing detergent or diluted glass cleaner. If you use glass cleaner make sure it does not contain ammonia. To clean the Mimio Capture Kit 106 Caring for Mimio Capture Kit 1. Use the lint-free cloth to wipe the exterior of the Mimio Capture Kit pens and eraser. 2. Remove dirt and smudges with one of the cleaning solutions mentioned above. Do not allow liquid into any openings on the equipment. Attaching the Mimio Capture Kit The Mimio Capture Kit pen and eraser holders attach securely to any whiteboard. To mount the Mimio Capture Kit pen holder 1. Remove the paper backing from the adhesive strips on the back of the pen holder to expose the adhesive. 2. Hold the Mimio Capture Kit pen holder vertically and press firmly against the whiteboard as shown. 3. Insert the Mimio Capture Kit pens into the pen holder when not in use. To mount the Mimio Capture Kit eraser holder 107 Mimio Capture Kit 1. Remove the paper backing from the adhesive strips on the back of the eraser holder to expose the adhesive. 2. Press the Mimio Capture Kit eraser holder firmly against the whiteboard as shown. 3. Insert the Mimio Capture Kit eraser into the eraser holder when not in use. 108 Chapter 8 MimioVote MimioVote is a wireless, interactive, student response system. Using MimioVote, you can easily and quickly gather student responses. This quick feedback from students allows you to make sure each student is keeping up and adjust your lesson accordingly. What's Included The MimioVote package contains the following items: 1 Carrying case 4 MimioVote unit (24 or 32) 2 Power cable 5 Charging station 3 MimioHub If you are missing any of the items above, contact Customer Support. About MimioVote Your MimioVote system comes with a charging station and either 24 or 32 MimioVote units. You can combine two MimioVote systems for a total of up to 64 units. About the MimioVote Station The MimioVote station is used to recharge and store all of your MimioVote units. 109 MimioVote You can place any MimioVote unit into any slot on the MimioVote station. The number assigned to each unit is automatically determined by the number of the slot that the unit is inserted into. There is no need to match a particular unit to a particular slot on the MimioVote station. Once a unit is inserted into the MimioVote station, the unit number appears in the unit display. The following figure shows the major components of the MimioVote station. 1 MimioVote unit slot 2 Status light 3 Power connector Status Lights The status light visually shows the status of the MimioVote station. Off Not receiving power; Power cable is not connected. Solid Green MimioVote is connected and receiving power; MimioStudio software is running. Flashing Green MimioVote is connected or connecting, and receiving power; MimioStudio software is not running. Solid Amber MimioVote cannot find an available MimioHub. Flashing Amber MimioVote is searching for an available MimioHub. About the MimioVote Units The MimioVote system includes either 24 or 32 MimioVote units. The MimioVote units slide into the MimioVote station to recharge or to store. 110 When conducting activities, the buttons on the MimioVote unit light up depending on what answers are available to the student. The available answers are determined by the teacher when the question is created. For example, if the question is a True/False question, only the  and  buttons are illuminated on the MimioVote unit. The A, B, C, D and E buttons will not light up and will not register a response if pressed. By default, each button on the MimioVote unit is illuminated with a different colour light. You can choose to turn off the colours and have all the buttons illuminated with a white light. For information about changing the button colours, see Adjusting the Vote Settings. The following figure shows the major components of the MimioVote unit. 1 Previous 5 Multiple choice buttons 2 Display 6 True/False buttons 3 Next 7 Submit 4 Help About the Software MimioStudio software includes several features especially for use with your MimioVote system. MimioStudio Notebook and Gallery include everything you need to create activities to conduct with your students. The MimioStudio Vote Toolbar and MimioStudio Quick Vote include all the tools you need for conducting activities and gathering student responses. And, the MimioStudio Gradebook stores the information and results for all of your class activities. About MimioStudio Notebook You can use MimioStudio Notebook to create any type of MimioVote activity. Activities are created by adding question objects to Notebook pages. The Questions and Results folder in MimioStudio Gallery includes a wide variety of pre-designed question objects to make 111 MimioVote creating activities in Notebook quick and easy. For more information about using MimioStudio Notebook and Gallery, see About MimioStudio. About the Vote Toolbar The Vote Toolbar includes all the tools you need for taking attendance, conducting class activities, gathering student responses and viewing results. The Vote Toolbar is available in MimioStudio Notebook. The following table describes the major features of the Vote Toolbar in MimioStudio Notebook. Choose Class Select class Number responded Take attendance View help requests Start/stop polling Start self-paced activity View results Print self-paced activity Timer display About MimioStudio Quick Vote You can use MimioStudio Quick Vote to ask questions that are not a part of a NotebookMimioVote activity. You can use Quick Vote to add a question at any time during a teacher-led activity. The following table describes the major features of MimioStudio Quick Vote. Choose Class Select class Timer display Take attendance Number responded Select question type and start/stop polling View help requests View results Settings About MimioStudio Gradebook MimioStudio Gradebook stores the results for all of your class activities. Student responses gathered using the MimioVote system are automatically saved to the Gradebook along with complete information for each question. You can also manually add activities that were not conducted using the MimioVote system, making it easy to keep all your grades in one location. The following views are available in Gradebook, giving you easy access to the information you want to view: 112 All Classes View The All Classes view displays a list of all of your saved classes, the number of students in each class, and the average grade for all students in the class. The All Classes view is displayed when no class is selected. Date View The Date view displays a list of all students in the selected class and all dates on which any activities were conducted. Each date column shows the average grade for each student, for all activities that were conducted on that date. From the Date view, you can also view the Class pane. The Class pane displays the name of the class, number of students in the class and the number of activities that have been conducted with the selected class. The Date view is displayed when a class is selected. Activity View The Activity view displays a list of all students in the selected class. The Attendance column shows the attendance status for each student on the selected date. The activity columns show the grade that each student received for each activity conducted on the selected date. From the Activity view, you can also view the Activity pane. The Activity pane displays the name of the activity, activity type, total number of questions and the weight of the activity. The Activity view is displayed when a class and date are selected. Activity Detail View The Activity Detail view displays a list of all students in the selected class. The Average column shows the grade for each student for the selected activity. Each question column shows the response that each student provided. The response icon indicates the student response or the question type. Multiple choice True/Yes False/No Numeric Short Answer Essay The colour of the response icon indicates the status of the student response. 113 MimioVote Correct Incorrect Partially Correct Opinion Ungraded The Activity pane displays the name, type and weight of the selected activity. From the Activity Detail view, you can also view the Question pane and the Student Response pane. The Question pane displays the question text, the available and correct answers, the question snapshot and the question weight. The Student Response Pane displays the student name and the student response for the selected question. The Activity Detail view is displayed when a class, date and activity are selected. In addition, you can view the Student pane from Date view, Activity view or Activity Detail view. The Student pane displays the name, student ID number, MimioVote unit number and address for the selected student. Getting Started Setting up the MimioVote system is quick and easy. You can link your MimioVote system to your computer using the included MimioHub. Or, if you have MimioTeach, you can link the MimioVote system to your computer using the MimioHub that you already have installed. Setting Up MimioVote Once you have installed the MimioStudio software on your computer, you can quickly install MimioVote. Each MimioVote unit is powered by a rechargeable lithium-ion battery. The battery recharges whenever the unit is docked in the MimioVote station. Charging the battery for the first time will take approximately six hours; when fully discharged, recharging the battery will take approximately twelve hours. To set up MimioVote 1. Pull the plastic strip from each MimioVote unit to activate the rechargeable battery. 2. Insert each MimioVote unit into a slot on the MimioVote station. 114 Getting Started 3. Plug the power cord into the power connector on the back of the MimioVote station. 4. Plug the other end of the power cord into a power outlet. 5. Plug the MimioHub into an available USB port on your computer. If you already have a MimioHub installed on your computer, a dialog box appears asking if you want to connect the MimioHub to the MimioVote system. Click Yes to link the MimioVote system to your existing MimioHub. Adding a Second MimioVote System Each MimioVote system includes either 24 or 32 MimioVote units. For larger classes, you can combine two MimioVote systems for a total of up to 64 units. You can use the same MimioHub to connect all of your MimioClassroom devices to your computer. To add a second MimioVote system 115 MimioVote 1. Set up the MimioVote station and units as described in Setting Up MimioVote. Once the power is connected to the MimioVote system, the previously installed MimioHub will detect the new system. 2. When prompted by the software, click Yes to connect the new system to the MimioHub. The second system is connected to your computer and the appropriate numbers are assigned to each MimioVote unit automatically. If you do not see the prompt or you want to connect the system at a later time, see Adjusting the Classroom Devices Preferences for information about connecting available devices to your computer. Using MimioStudio Gradebook You can use MimioStudio Gradebook to store information for all of your classes, students and class activities. Student responses gathered using the MimioVote system are automatically saved to the Gradebook along with complete information for each question. You can also manually add activities that were not conducted using the MimioVote system, making it easy to keep all your grades in one location. Several ways to access MimioStudio Gradebook are shown in the following table. To start from the Do this Dock Click  in the Dock. Menu bar Click , and then choose Gradebook. Setting Up the Gradebook Before you begin using your MimioVote system to conduct activities you must first set up MimioStudio Gradebook. You can add as many classes as you want to Gradebook and then add students to each of your classes. Creating a Class You can create as many classes as you want in Gradebook. Once you have created a class, you can add students to the class by manually entering all student names and information, or you can import a list of students. To create a class 1. Click  on the Gradebook toolbar. The Add Class dialog box appears. 2. Enter a name for the class in the Name box and then click Add. The class is added to your class list. Adding Students The number of students you can have in each class depends on the number of MimioVote units you have. You can combine two MimioVote systems for up to 64 units. 116 Using MimioStudio Gradebook Each student that you add to a class is automatically assigned a MimioVote unit number. To add a student to a class 1. Select the class to add a student to. 2. Click  on the Gradebook toolbar. The Add Student dialog box appears. 3. Enter the name, student ID number, and address for the student. The MimioVote handset ID is assigned automatically. 4. Click Add. The student is added to the class. Importing a List of Students You can add students to a class manually by entering all student names and information or you can import an existing list of students into a class. You can import students from a Unicode text file (TXT) or a Comma separated value file (CSV). Each student must have at least a first or last name assigned to them in order to be imported. The following fields are supported for importing into Gradebook. n n n n n n StudentID FirstName MiddleName LastName Gender Birthdate n n n n n Address City State Postcode Country Each student that you add to a class is automatically assigned a MimioVote unit number. To import a class list 1. In Gradebook, select the class you want to import the student list into. 2. From the File menu, choose Import followed by Students. The Open dialog box appears. 3. Navigate to and select the file you want to import and then click Open. The students are added to the selected class. Adding Activities You can keep track of all of your student scores using Gradebook. Scores for all MimioVote activities are automatically saved to the Gradebook. You can also manually enter activities that were not performed using MimioVote. To add an activity 1. Select the class to add the activity to. 2. Click  on the Gradebook toolbar. 3. In the Add Activity dialog box, do the following: a. Enter a name for the activity in the Name box. b. Choose the type of activity to add from the Type list. 117 MimioVote c. Choose the month, date and year that the activity was performed. d. Enter the number of points the activity is worth in the Points box. e. Click Add. The activity is added and displayed in the Gradebook. 4. Enter a grade for each student in the Average column. Modifying the Gradebook You can modify the information in the MimioStudio Gradebook in the following ways: n Editing Student Information n Removing a Student n Editing Activities n Editing Questions n Pupil Responses n Grading Essay Questions Editing Student Information You can edit any information for an existing student, including the student name, student ID number, MimioVote unit ID number, and address. To edit student information 1. Select the student to edit. 2. Click Edit Student on the Student pane. The Edit Student dialog box appears. 3. Make any desired changes to the student information. 4. Click OK to save your changes. Removing a Student You can delete a student from a class at any time. Deleting a student permanently removes the student from the class and removes all of their activity results from the Gradebook. To remove a student from a class 1. Select the class that contains the student you want to remove. 2. Select the student to remove. 3. Choose Delete from the Edit menu. 4. Follow the instructions in the Confirm Delete dialog box and then click OK. The selected student and all information for the selected student is permanently deleted from the Gradebook. Editing Activities You can edit the name, type and weight for an activity at any time. To edit an activity 1. Select the activity to edit. 2. Click 118 Edit Activity on the Activity pane. Using MimioStudio Gradebook The Edit Activity dialog box appears. 3. In the Edit Activity dialog box, you can do any of the following: l Enter a new name for the activity in the Name box. l Choose a different activity type from the Type list. l Enter a new weight for the activity in the Weight box. 4. Click OK to save your changes. Editing Questions Each time you stop polling for a question, a copy of the question, along with the correct answer, is saved to the Gradebook. You can edit the question text, correct answer, question type and question weight at any time in Gradebook. For example, if the answer that was selected as the correct answer in the question object is incorrect you can change the answer in the Gradebook to automatically update the student scores. Changing the answer for a question in the Gradebook does not automatically change the answer in the question object in Notebook. To change the answer for subsequent activities, you must make the correction to the question object in Notebook. To edit a question 1. Select the question to edit. 2. Click Edit Question on the Question pane. 3. In the Edit Question dialog box, you can do any of the following: l Edit the question or answer text under Question Information. l Click the button to the left of the correct answer to change the correct answer for the question. l Choose a different question type from the Type list. l Enter a new weight for the question in the Weight box. 4. Click OK to save your changes. Editing Student Responses You can edit a student response to any Question in a completed Activity. To edit a student response 1. Select the response to edit. 2. Click Edit Student Response on the Student Response pane. The Edit Student Response dialog box appears. 3. In the Response box, edit the student response as needed. 4. Click OK to save your changes. Grading Essay Questions You can enter a grade for an essay question in a completed activity. To grade an essay question 1. Select the essay question to grade. 2. Click 119 MimioVote Edit Student Response on the Student Response pane. The Edit Student Response dialog box appears. 3. Under Score Student Response, do one of the following: l Drag the Score slider to adjust the score for the essay question. l Enter a score for the essay question in the Score box. 4. Click OK to save your changes. Generating Reports You can generate a variety of reports from MimioStudio Gradebook. Reports are generated as HTML files and are displayed in your default Web browser. You can generate the following types of reports: n Class Grade Report- a grade report for all students in the selected class n Class Activity Report - a detailed report for the selected activity n Student Summary Report - a summary report of all activities for the selected student n Student Activity Report - a detailed report for all selected activities for the selected student You can generate reports from the Class, Activity, and Student panes in Gradebook or from the Report menu. Exporting a List of Students You can export a list of students from any class you have saved in Gradebook to a Unicode tab-delimited text file (TXT). To export a list of students 1. Display the class that contains the students you want to export. 2. From the File menu, choose Export followed by Students. The Export Students dialog box appears. 3. Select Export student information and then click OK. The Save As dialog box appears. 4. Enter a name for the file in the File name box and then click Save. 5. Enter a name for the file in the Save as box and then click Save. Archiving Classes You can archive your classes by exporting a class to a MimioStudio Gradebook Archive (MVA) file. The archive file contains all student, activity and results information. You can use this file to backup your classes or to move classes from one Gradebook to another. To archive a class 1. From the File menu, choose Export, and then choose Class. The Export Class dialog box appears. 2. Select Export class information and then click OK. The Save As dialog box appears. 120 Creating MimioVote Activities 3. Enter a name for the archive file in the File name box and then click Save. 4. Enter a name for the archive file in the Save as box and then click Save Exporting Results You can export class and activity results from the Gradebook to a Unicode tab-delimited text file (TXT) or Comma separated values file (CSV) for use in another application. You can export the following information: n Class results - includes the class average for each student in the selected class. n Class and activity results - includes the class average for each student as well as the grade each student received for each activity n Activity results - includes the grade for each student for the selected activity. To export class results 1. From the File menu, choose Export, and then choose Class. The Export Class dialog box appears. 2. Select Export class results and then click OK. The Save As dialog box appears. 3. Enter a name for the file in the Save as box and then click Save. To export class and activity results 1. From the File menu, choose Export, and then choose Class. The Export Class dialog box appears. 2. Select Export class and activity results and then click OK. The Save As dialog box appears. 3. Enter a name for the file in the Save as box and then click Save. To export activity results 1. From the File menu choose Export followed by Activity. The Export Activity dialog box appears. 2. Select Export activity and question results, and then click OK. The Save As dialog box appears. 3. Enter a name for the file in the Save as box and then click Save. Opening Archived Classes You can open your archived class files at any time by importing the archive (MVD) file into the Gradebook. Once imported, all classes in the archive file will appear along with your current classes in the Gradebook. To open archived classes 1. Choose Import Classes from the File menu. The Open dialog box appears. 2. Navigate to and select the archive file to import and then click Open. Creating MimioVote Activities You can create MimioVote activities in MimioStudio Notebook. 121 MimioVote You can also use MimioStudio Quick Vote to ask questions that you did not previously create in Notebook. You can add the following types of questions to your activity: n TF - True/False, Yes/No, or Agree/Disagree n AB - Multiple choice, two possible answers n ABC - Multiple choice, three possible answers n ABCD - Multiple choice, four possible answers n ABCDE - Multiple choice, five possible answers n Numeric - One or more numeric answers (compatible with MimioMobile only) n Short Answer - One or more alpha-numeric short answers (compatible with MimioMobile only) n Essay - A single alpha-numeric answer (compatible with MimioMobile only) Creating Activities in Notebook You can use MimioStudio Notebook to create any type of MimioVote activity. Activities are created by adding question objects to Notebook pages. The Questions and Results folder in MimioStudio Gallery includes a wide variety of pre-designed question objects to make creating activities in Notebook quick and easy. Each question object contains a single question and each question must be on a separate Notebook page. Once you've added a question object to an activity, you can customize the object properties to change the appearance or behaviour of the question object. To create an activity in Notebook 1. Open a new or existing Notebook. 2. In MimioStudio Gallery, click the arrow next to the Questions and Results folder and then select the Questions folder. 3. Drag the desired question object from the Gallery into the Notebook. Only one question object can be placed on each Notebook page. 4. Enter the question text in the Question box. 5. Do one of the following: l For a multiple choice question, enter an answer choice for the question in each of the Answer boxes. l For a numeric question, enter a numeric answer for the question in the Answer box. If there is more than one possible answer, separate each answer with a carriage return. l For a numeric question, enter a numeric answer for the question in the Answer box. If there is more than one possible answer, separate each answer with a carriage return. l For an essay question, you can choose to enter an example answer, a note, or no answer in the Answer box. 6. If applicable, select the correct answer. 122 Creating MimioVote Activities 7. To add another question to the activity, do the following: a. Click  to add a new page to the Notebook. b. Repeat steps 3-6 to add a question to the new page. Modifying Question Objects MimioStudio Gallery includes a variety of pre-designed question objects for creating MimioVote activities. Once you add a question object to a Notebook page you can use the question objects as is or you can choose to change the properties of the question object. You can change the question type, animation for correct answers and question weight. To modify a question object 1. Click  at the bottom-right of the question object you want to modify. The question object properties appear. 2. In the question object properties you can do any of the following: l To change the question type, select an available question type. l To change the correct answer animation, select an available animation. To change the weight of the question, enter the weight for the question in the weight, , box. l To change the number of correct answers required for a numeric or short answer question, enter the number of correct answers required in the number of correct answers required  box. 3. Click  to save your changes and display the question object. l Importing Standard Assessments You can import standard assessments into MimioStudio Notebook for use with MimioVote. Only files that have been exported from ExamView® as Blackboard® (6.0-7.0) format can be imported into Notebook. For information about installing ExamView® and downloading and exporting ExamView® files, see the ExamView® documentation. To import a standard assessment 1. Start MimioStudio Notebook, and then click The Open dialog box appears. . 2. Navigate to and select the file to import and then click Open. The file is imported and displayed in Notebook. Printing Activities You can print an activity from Notebook to use as a self-paced activity. Normally when you print a Notebook presentation, each page of the Notebook prints on a separate page. However, you can choose to print the activity so that multiple questions appear on a single page. When you choose to print an activity, an HTML file is created from the Notebook activity. The HTML file contains all question and answer text, but no images. You can choose to print or save the HTML file. 123 MimioVote To print an activity 1. Open the activity to print. 2. Do one of the following: l l Click  on the Vote Toolbar. Choose Print Test from the File menu. The Select Class dialog box appears. 3. From the Class list select the class to print the activity for and then click OK. The activity is displayed as an HTML file in your default Web browser. 4. Choose Print from the File menu. The Print dialog box appears. 5. Click Print. Using the MimioVote Unit Each MimioVote unit is assigned to one student per class. Students should use their assigned MimioVote unit each time an activity is conducted. Students can also use a mobile device with MimioMobile to participate in an activity. For more information about MimioMobile, see MimioMobile. By default, each button on the MimioVote unit is illuminated with a different colour light. You can choose to turn off the colours and have all the buttons illuminated with a white light. For information about changing the button colours, see Adjusting the Vote Settings. Answering Questions Depending on the type of question being asked, the appropriate buttons are illuminated on the MimioVote unit. For example, when polling is started for a True/False question only the and buttons are illuminated on each MimioVote unit. The A, B, C, D and E buttons are not illuminated and will not register a response if pressed. Answering Questions for Teacher-Led Activities For teacher-led activities, questions are answered one at a time as they are displayed. To answer a question Press the button on the MimioVote unit that corresponds to the correct answer for the displayed question. Answering Questions for Self-Paced Activities For self-paced activities, questions can be answered in any order. The current question number is displayed on the MimioVote unit. For each question, the available answer buttons are illuminated, as well as the next and previous buttons. To answer questions in a Self-Paced activity 1. Press the button on the MimioVote unit that corresponds to the correct answer for the first question. 124 Using the Vote Toolbar The unit automatically advances to the next question. The current question number appears in the unit display. 2. Repeat step 1 for each remaining question in the activity. You can change your answer to any question at any time before submitting your answers. Use and  to move through the questions and review or change any answers as desired. The currently selected answer button flashes. 3. When all questions in the activity have been answered, press . You must answer every question before submitting the activity. The become available until all questions have been answered.  button will not Requesting Help A student can request help or request to ask a question at any time using the MimioVote unit. To request help Press  on the MimioVote unit. For information about viewing help requests, see Viewing Requests for Help. Using the Vote Toolbar The Vote Toolbar includes all the tools you need for taking attendance, conducting class activities, gathering student responses and viewing results. Taking Attendance You can quickly take attendance and record the results using MimioVote. To take attendance 1. Select the class to take attendance for from the Class list. 2. Click  on the Vote Toolbar. A list of all students in the selected class is displayed in the Attendance window. As each student indicates that they are present, the icon for that student is illuminated. A student indicates they are present by pressing on their MimioVote unit. 3. Close the Attendance window to stop taking attendance and save the results to the Gradebook. Using the Timer The timer on the Vote Toolbar displays the amount of time that has passed since you started polling. The timer automatically starts each time you start polling and automatically stops each time you stop polling. Conducting Activities Using MimioVote, you can perform teacher-led or self-paced activities. Review the following topics for information about conducting activities. 125 MimioVote n Conducting a Teacher-Led Activity n Asking Questions Using Quick Vote n Conducting a Self-Paced Activity n Viewing Question Results n Viewing Session Results n Viewing a List of Students that Have Not Responded Conducting a Teacher-Led Activity Once you have created an activity in Notebook, you can perform the activity with your class. When performing a teacher-led activity, the questions are displayed one at a time for the students. You can ask questions that you did not previously create in Notebook at any time during a teacher-led activity using MimioStudio Quick Vote To conduct a teacher-led activity 1. Open the Notebook presentation that contains the activity you want to conduct. 2. Select the class that will participate in the activity from the Class list. 3. Display the first question for the class. 4. Click  on the Vote Toolbar to start polling for the question. In Notebook, you can also start and stop polling directly from the question object by clicking . When all students have responded, polling for the question stops and the results are saved to the Gradebook. 5. To stop polling for a question before all students have responded, click . Polling stops and the results are saved to the Gradebook. 6. Repeat steps 4-6 for each remaining question in the activity. 7. When all questions in the activity have been answered, close the presentation and the Vote Toolbar to stop the activity. Asking Questions Using Quick Vote Using the MimioStudio Quick Vote, you can ask questions that you did not previously create in Notebook at any time during a teacher-led activity. To ask a question using Quick Vote 1. Do one of the following to start Quick Vote: l Click and then choose Quick Vote. (Interactive mode only) Press the Launch button on the MimioTeach bar and then click Quick Vote. 2. Select the class that will participate in the activity from the Class list. l 3. Click and then choose the question type to start polling for the question. When all students have responded, polling for the question stops. 4. To stop polling for a question before all students have responded, click 5. Click the letter that corresponds to the correct answer for the question. 126 . Using the Vote Toolbar The results for the current question are saved to the Gradebook along with a screen shot. Conducting a Self-Paced Activity Once you have created an activity in Notebook, you can perform the activity with your class. When performing a self-paced activity, each student must have a printed copy of all questions in the activity. For information about printing activities, see Printing Activities. To conduct a self-paced activity 1. Open the Notebook presentation that contains the activity you want to conduct. 2. Select the class that will participate in the activity from the Class list. 3. Click . The Self-Paced Test window appears. 4. (Optional) Use the and buttons to set the timer. The timer displays the amount of time left for the activity. If you do not set the timer, the timer displays the amount of time that has passed since polling started. 5. Click  to start polling for all questions. Each student can move through the questions at their own pace using the buttons on their MimioVote unit. and Once all students have submitted their responses or when the timer runs out, polling for the activity stops and the results are saved to the Gradebook. 6. To stop polling for an activity before all students have submitted their response or before the timer runs out, click . All results for the activity are saved to the Gradebook. Viewing Question Results You can instantly view the results for a question as soon as you stop polling. There are a variety of ways to view the results for a question. To view the result for a question 1. Click , and then choose Question Results. The Question Results window appears. 2. To modify the appearance of the results, click . You can change the type and colours of the graph shown. You can also choose to show the number or percentage of correct answers. 3. Click  to save your changes and view the results. Viewing Activity Results You can instantly view the results for an activity as soon as you stop polling. There are a variety of ways to view the results for an activity. To view the result for an activity 1. Click and then choose Activity Results. The Activity Results window appears. 127 MimioVote 2. To modify the appearance of the results, click . 3. Click  to save your changes and view the results. Viewing a List of Students that Have Not Responded While you are polling a class, the number of students that have responded to the current question is displayed on the Vote Toolbar. You can quickly view a list of all students that have not yet responded. To view a list of students that have not responded Click  on the Vote Toolbar. A list of students that have not yet responded is displayed in a separate window. Viewing Requests for Help Using their MimioVote unit, a student can request help or request permission to ask a question at any time. For information on using the MimioVote unit to request help, see Requesting Help. You can quickly view a list of all students that have requested help. To view students requesting help 1. Click  on the Vote Toolbar . A list of students that have requested help is displayed in a separate window. 2. Click the icon for a student to remove that student from the list. Caring For MimioVote Review the following topics for information about cleaning and storing your MimioVote system. n Cleaning MimioVote n Storing MimioVote Cleaning MimioVote The MimioVote is designed to give you long and trouble-free service while requiring very little maintenance. You can easily clean your MimioVote using the following items: n Lint-free cloth. n Isopropyl alcohol, diluted dishwashing detergent or diluted glass cleaner. If you use glass cleaner make sure it does not contain ammonia. To clean the MimioVote station and units 1. Disconnect the power cable. 2. Use the lint-free cloth to wipe the exterior of the MimioVote station and each MimioVote unit. 3. Remove dirt and smudges with one of the cleaning solutions mentioned above. Avoid using liquids on any exposed charging contacts. Do not allow liquid into any openings on the equipment. 128 Caring For MimioVote 4. Reconnect the power cable. Storing MimioVote The MimioVote system comes with a carrying case for your MimioVote station and MimioVote units. You can use this case to transport the system and to safely store your MimioVote system when not in use. 129 This page intentionally left blank for double-sided printing. 130 Chapter 9 MimioView 340H MimioView works seamlessly with MimioStudio software to display documents, threedimensional objects and microscope slides for your entire class to view. You can use MimioView to display still images or live video. What's Included The MimioView package contains the following items: 1 Microscope adaptor 2 MimioView visual presenter 3 USB cable If you are missing any of the items above, contact Customer Support. 131 MimioView 340H About MimioView You can use the MimioView visual presenter to display documents, three-dimensional objects, and microscope slides. The MimioView visual presenter and lamps are each attached to the MimioView base by a flexible gooseneck. This allows you to precisely position the camera and each lamp for the best possible view of the object you are displaying. The following figure shows the major components of the MimioView visual presenter. 1 Camera head 5 View button 2 Auto focus 6 Status light 3 LED lamps 7 Kensington lock slot 4 Auto tune, Rotate and Freeze buttons 8 Type B USB port Status lights The status light visually shows the status of the MimioView visual presenter. Off Not receiving power; USB cable is not connected or computer is turned off. Solid Green MimioView is connected and receiving power; MimioStudio software is running. Flashing Green 132 MimioView is connected and receiving power; MimioStudio software is not running. Getting Started About MimioStudio View The View window displays the image captured by the MimioView visual presenter. From the View window, you can rotate or zoom the image, mark up the image using MimioStudio Tools, adjust the contrast and brightness settings, freeze the image, and so on. The following table describes the major features of the MimioStudio View window. Lamps on/off Copy selected portion of image Auto tune Zoom in Adjust brightness and contrast Zoom out Rotate counter-clockwise 90 degrees Zoom to fit window Rotate clockwise 90 degrees Open MimioStudio Tools Freeze/Unfreeze image Record live image Clear all markups View full screen Getting Started Review the following topics to install and start using MimioView. n Installing MimioView n Opening the View Window n Closing the View Window Installing MimioView Once you have installed the MimioStudio software on your computer, you can quickly install MimioView. To install MimioView 1. Remove the protective covering from the MimioView camera lens. 2. Plug the USB cable into the Type-B female USB port on the back of the visual 133 MimioView 340H presenter base. 3. Connect the other end of the USB cable into an available USB port on your computer. Opening the View Window When you press the View button on the MimioView, the camera and lamps turn on and the MimioStudio View window opens automatically. To close the View window Press  on the MimioView base. The MimioStudio View window opens and the camera and lamps turn on. Closing the View Window You can close the MimioStudio View window from the View window or directly from the MimioView visual presenter. To close the View window Do one of the following: l Close the MimioStudio View window. The camera and lamps turn off automatically. l Press  on the visual presenter base. The camera and lamps turn off and the MimioStudio View window closes. Using MimioView You can use MimioView to display a still image or live video of documents, threedimensional objects or microscope slides. You can also use MimioStudio Tools to mark up the still image or live video displayed in the View window; you can then save the image to a Notebook or the Gallery for later use. Displaying an Image You can use MimioView to display a still image or live video of documents, threedimensional objects or microscope slides. Displaying a Document You can use MimioView to display a document, book or other two-dimensional object. 134 Using MimioView To display a document 1. Place the document under the MimioView visual presenter. 2. Adjust the camera head so that the desired image is displayed in the View window. 3. Adjust the lamps to light the document as desired. 4. Press  on the MimioView base. Displaying an Object Using MimioView, you can display a three-dimensional object. The camera and lamps are each attached to the MimioView base by a flexible gooseneck. This allows you to precisely position the camera and lamps for the best possible view of the object you are displaying. To display a three-dimensional object 1. Place the object under the MimioView visual presenter. 2. Adjust the camera head so that the desired image is displayed in the View window. 3. (Optional) Press  to rotate the image to the desired orientation. 4. Adjust the lamps to light the object as desired. 5. Press  on the MimioView base. Displaying a Microscope Slide Using the included microscope adapter, you can display an image from a microscope with the MimioView visual presenter. The microscope adaptor can be used with a 28 mm microscope eyepiece. To display a microscope slide 1. Set up the microscope so that you have the desired view through the microscope eyepiece. 2. Twist and lock the microscope adapter onto the MimioView visual presenter head. 3. Slowly and carefully slide the other end of the microscope adaptor onto the microscope eyepiece. Use caution to make sure that the image stays in focus while attaching the microscope adaptor. The image from the microscope is displayed in the View window. 4. Make any adjustments necessary to the microscope to adjust the image. 5. Press  on the MimioView base. 135 MimioView 340H Freezing the Image The image captured by the MimioView visual presenter is displayed in the View window. By default, a live image is displayed. However, you can choose to display a still image of the object. To freeze the image Do one of the following: l Press  on the MimioView base.  on the View toolbar. l Click The image is paused in the View window. To return to displaying live video, press or click  a second time. Adjusting the Image MimioView includes features that make it easy to adjust the image displayed in the MimioStudio View window without having to adjust the camera or the displayed object. You can do the following to adjust the displayed image: n Rotate the Image n Zoom the Image n Adjust the Settings Rotating the Image You can quickly rotate the image that is displayed in the View window directly from the MimioView visual presenter or from the View window. To rotate an image from the MimioView visual presenter Press  on the MimioView. The image displayed in the View window rotates clockwise 90 degrees. To rotate an image from the View window Do one of the following: l To rotate the image clockwise, click . To rotate the image anti-clockwise, click . The image displayed in the View window rotates 90 degrees in the selected direction. l Zooming the Image You can quickly zoom the image displayed in the View window. You can also zoom the image displayed in the View window using the Zoom tool in MimioStudio Tools. To zoom the image Do one of the following: 136 l To zoom in on the image, click  on the toolbar. l To zoom out from the image, click  on the toolbar. Using MimioView To fit the image to the MimioStudio View window, click  on the toolbar. If the area of the image that you want to display is not visible in the View window, use the scroll bars to display the desired area of the image. l Adjusting the Settings You can adjust the brightness and contrast settings automatically or manually. To adjust the settings automatically n Do one of the following: l Press  on the MimioView base. l Click  on the View toolbar. To adjust the settings manually 1. Click  on the View toolbar. The Advanced Settings toolbar appears. 2. Move the Brightness and Contrast sliders to the right or left to adjust the settings as desired. 3. Click  to hide the Advanced Settings toolbar. Annotating an Image You can use MimioStudio Tools to annotate the image displayed in the View window. You can also add objects to the View window from MimioStudio Gallery. See Adding Objects with MimioStudio Tools for information about using MimioStudio Tools. The following object, drawing and manipulation features in MimioStudio Tools are available to use in the View window. 137 MimioView 340H Selection tool Zoom Pen Brush Text Highlighter Line Arrow End Arrow Start Arrow Both Rectangle Ellipse Triangle Right-Angled Triangle Five-Pointed Star Hexagon Pentagon Shape Recognition Eraser Insert file Colour picker More colours Object Fill Thickness slider Outline and Fill colour Colour palette Solid Line Dash Line Square Dot Line Transparency Clearing All Annotations from the Image You can quickly clear all annotations from the View window. To clear all annotations Click  on the View toolbar. All annotations, including any added objects, are cleared from the View window. Transferring an Image You can transfer all or part of an image from the View window to a Notebook page, the Gallery or another application. To transfer an image 1. Click  on the View toolbar. The Image area is displayed with a transparent mask. 2. Drag the cursor to draw a selection box around the area to copy. 138 Caring For MimioView The selected area is saved as an image to the clipboard. 3. Paste the image into the desired application. Recording Video Using MimioStudio Recorder, you can record your interactions into an MP4 movie file, with or without audio. See Using MimioStudio Recorder for more information on how to use MimioStudio Recorder. Turning Off the Lamps When you turn on MimioView, the camera and both lamps turn on. However, you can choose to turn off the lamps and use the camera without the lamps. To turn off the lamps n Click  on the View toolbar. To turn the lamps on again, click  a second time. Caring For MimioView Review the following topics for information about cleaning, storing and mounting your MimioView. n Cleaning MimioView n Mounting MimioView Permanently Cleaning MimioView The MimioView is designed to give you long and trouble-free service while requiring very little maintenance. You can easily clean your MimioView using the following items: n Lint-free cloth. n Isopropyl alcohol, diluted dishwashing detergent or diluted glass cleaner. If you use glass cleaner make sure it does not contain ammonia. To clean the exterior of the MimioView 1. Disconnect the USB cable. 2. Use the lint-free cloth to wipe the exterior of the MimioView. 3. Remove dirt and smudges with one of the cleaning solutions mentioned above. Do not allow liquid into any openings on the equipment. 4. Reconnect the USB cable. To clean the camera lens Use a clean, dry, lint-free cloth to gently wipe the surface of the lens. Attaching MimioView Permanently You can permanently attach your MimioView to a table or desk top using a standard VESA mount and four screws (size M4). To attach MimioView permanently 139 MimioView 340H 1. Attach the VESA mount to the table or desktop. For information about attaching the VESA mount to your table or desktop, see the VESA documentation. 2. Attach the VESA base to the bottom of the MimioView as shown. MimioView Safety Notices Carefully read all recommendations and precautions for use before using this product. 140 n This product should not be used near water such as sinks, etc. n Do not place this product near any heat sources such as radiators, warm air intakes, etc. n Use only accessories specified by the manufacturer. Chapter 10 MimioPad (Model Number: ICD07) With the new MimioPad, teachers and students can collaborate using interactive whiteboard lessons from up to 30 feet away from the computer. The MimioPad can be used alone with MimioStudio classroom software or in conjunction with MimioTeach interactive system and other MimioClassroom products. Anything you write and draw on the MimioPad appears instantly on the whiteboard. MimioPad can be used in teacher mode or student mode. When more than one MimioPad is used in the same classroom, the first MimioPad to be turned on starts up in teacher mode, providing complete desktop control. Each additional MimioPad automatically starts up in student mode. Teachers can pass desktop control to any MimioPad in student mode and initiate group activities so that all students with a MimioPad can simultaneously participate in an activity. For information about the original MimioPad tablet, refer to MimioPad Model Number: RCK-M01. What's Included The MimioPad package contains the following items: 1 MimioPad 4 Replacement pen tip 2 Pen 5 Shortcut key reference card 3 USB cable If you are missing any of the items above, contact Customer Support. 141 MimioPad (Model Number: ICD07) About MimioPad Familiarise yourself with the features of your MimioPad as shown in the following illustrations. 1 Active area 4 LCD display 2 Shortcut keys 5 Page up 3 Power button/Status light 6 Page down Status Light The status light visually shows the status of the MimioPad tablet. Off Not receiving power; MimioPad is turned off. Solid Green MimioPad is connected and MimioStudio software is running. Flashing Green MimioPad is connected or connecting and MimioStudio software is not running. Solid Amber MimioPad cannot find an available MimioHub. Flashing Amber MimioPad is searching for an available MimioHub. About the Feature Indicators The feature indicators on the LCD display are described below. 142 Getting Started Connected The MimioPad is connected to your computer. Pen connected The pen is within sensing distance of the MimioPad. Teacher mode The MimioPad is in Teacher mode. ID number Shows the ID number of the MimioPad. Each connected MimioPad is assigned a different ID number. Battery indicator Shows how much charge is left in the MimioPad battery. Getting Started Your MimioPad is installed at the same time you install the MimioStudio software. Follow these instructions to begin using your MimioPad. Charging the MimioPad The MimioPad battery is charged using the included USB cable. The Li-ion MimioPad battery may contain some charge right out of the box. However for best results completely charge the battery before using the MimioPad. The first time you charge the battery may take up to 5 hours. The following table describes the possible states of the battery indicator. Battery Indicator Status Description Battery indicator is solid Battery is fully charged Battery segments rotate Battery is charging Battery outline blinks Less than 30 minutes of battery life left Battery segments and outline blink Charging error No battery indicator displayed Battery not inserted To charge the battery 1. Plug the USB cable into the pad and into your computer. 2. If the MimioPad is turned off, press the power button to turn the MimioPad on. 3. When the battery is fully charged, unplug the USB cable from the pad and your computer. Configuring MimioPad The MimioPad connects to your computer using the standard MimioHub. To configure MimioPad 143 MimioPad (Model Number: ICD07) 1. Plug the MimioHub into a USB port on your computer 2. Turn on the MimioPad. Once the power is on, the MimioHub will detect the MimioPad. 3. When prompted by the software, click Yes to connect the MimioPad to the MimioHub. The MimioPad is connected to your computer. If this is the first or only MimioPad connected to this computer, the MimioPadis started in teacher mode and displays the teacher mode icon. If you do not see the prompt, see Adjusting the Classroom Devices Settings for information about connecting available devices to your computer. Replacing the MimioPad Battery The MimioPad battery can be easily replaced if necessary. To replace the battery, you will need a screwdriver. To replace the battery 1. Using a screwdriver, remove the screw from the battery compartment cover. 2. Remove the battery compartment cover. 3. Remove the battery from the battery compartment. 4. Insert the new battery. 5. Replace the battery compartment cover and the screw. Using MimioPad Using the Shortcut Keys Shortcut keys are available across the top of the active area of the pad. These keys allow you to quickly access features in the MimioStudio software. Selection tool Redo Pen Tools Highlighter Screen Annotation Eraser Text Tool Cut MimioVote Copy MimioView Paste Control Undo Launch For more information about these features, see MimioStudio, MimioVote, and MimioView. Using MimioStudio Collaborate Using the MimioPad, you can conduct a group activity. The display automatically divides into individual workspaces, depending on the number of MimioPad tablets connected to your computer. 144 Using MimioPad You can use Collaborate in one of two ways. n Quick Collaborate - displays a blank page for each student n Collaborate - displays the current Notebook page for each student When you exit from Collaborate, each student workspace is automatically archived as a separate MimioStudio Notebook page in the Collaborative Sessions folder in MimioStudio Gallery. The following table shows several ways to access Collaborate. To start from Do this Right-click , and then choose Menu bar Click MimioStudio Tools Click the Applications button, Collaborate. , and then choose Quick Collaborate. Quick Collaborate. , and then choose Quick Do one of the following: MimioStudio Notebook n n Click the Collaborate button, . Choose Collaborate from the Tools menu. Maximising a Workspace You can maximise a student workspace to highlight individual work for the class. You can maximise a student workspace from the MimioPad or from MimioStudio. To maximise a workspace Double-click the student name at the bottom of the workspace to maximise the workspace. The selected workspace is displayed in full-screen mode. Sharing Control You can pass desktop control to any active MimioPad. To share control 1. Click the Applications button, , and then choose 2. Click the student tablet to pass control to. Control. Pairing an Additional MimioPad with the MimioHub Each MimioPad connects to your computer using the standard MimioHub. You can use the same MimioHub to connect all of your MimioClassroom devices to your computer. To pair an additional MimioPad with the MimioHub 1. Turn on the MimioPad. Once the power is on, the previously installed MimioHub will detect the MimioPad. 2. When prompted by the software, click Yes to connect the MimioPad to the MimioHub. 145 MimioPad (Model Number: ICD07) The second MimioPad is connected to your computer and the appropriate number is assigned to the MimioPad automatically. If you do not see the prompt, see Adjusting the Classroom Devices Settings for information about connecting available devices to your computer. Replacing the Lanyard with the Pen Tip The MimioPad comes with a lanyard attached to the pen. You can remove the lanyard and attach the included additional pen tip. To replace the lanyard with the pen tip 1. Turn the lanyard attachment anti-clockwise to remove the lanyard from the pen. 2. Place the additional pen tip on the pen and turn clockwise to attach the lanyard. 146 Chapter 11 MimioPad (Model Number: RCK-M01) MimioPad is a 2.4 GHz wireless pad. To configure MimioPad for use, install the MimioStudio software and plug the wireless receiver into your computer. Once connected, you can use the MimioPad from anywhere in the room to interact with your computer. No additional configuration is required. For information about the new MimioPad tablet, refer to MimioPad Model Number ICD07. What's Included The MimioPad package contains the following items: 147 MimioPad (Model Number: RCK-M01) 1 MimioPad 6 Wireless receiver 2 Extra pen tips (inside MimioPad battery compartment) 7 Pen battery 3 Pen tip extractor (inside MimioPad battery compartment) 8 Pad battery 4 Pen 9 Quick Start Guide 5 USB cable If you are missing any of the items above, contact Customer Support. About MimioPad Familiarise yourself with the features of your MimioPad as shown in the following illustrations. 148 Getting Started 1 Active area 7 Page up/Page down Volume up/Volume down 2 Shortcut keys 8 Wireless receiver storage 3 LCD display 9 Learning button 4 Power button 10 Battery compartment (extra pen tips and pen tip extractor) 5 USB connection 11 Learning button/LED 6 Pen slot About the Feature Indicators The feature indicators on the LCD display are described below. Power The power is on. Battery Indicator Shows how much charge is left in the MimioPad battery. Power Saving Mode Power saving mode is on. The MimioPad enters power saving mode when the pen is away from the active area for three seconds. Connected The MimioPad is connected to your computer. Wireless Activity The wireless receiver is active. Pen Sensor Blinking: Pen tip is in range of active area; indicates hover mode. Solid: Pen tip is touching active area; indicates left-click. Pad Number When more than one MimioPad is connected to a receiver, shows the number of the connected MimioPad. Getting Started Setting Up the MimioPad Your MimioPad is installed at the same time you install the MimioStudio software. Follow these instructions to begin using your MimioPad. To insert the battery 1. Press down and slide off battery compartment cover. 2. Insert the battery. 149 MimioPad (Model Number: RCK-M01) 3. Replace the battery compartment cover. Charging the Battery The MimioPad battery is charged using the included USB cable. The Li-ion MimioPad battery may contain some charge right out of the box. However for best results completely charge the battery before using the MimioPad. Charging the battery for the first time may take up to 10 hours. After the initial charge, recharging of the battery will take approximately two hours. To charge the battery 1. Plug the USB cable into the pad and into your computer. 2. When the battery is fully charged, unplug the USB cable from the pad and your computer. Setting Up the Pen The pen uses one AAA battery. To insert the pen battery 1. Twist the top of the pen anti-clockwise. 2. Lift the battery cover and insert battery as shown. 3. Replace battery cover and pen top. Configuring MimioPad Delete this text and replace it with your own content. To configure MimioPad 1. Plug the wireless receiver into a USB port on your computer. 2. Press and hold the power button on the pad for at least three seconds to turn on the power. 150 Using MimioPad 3. Place the pen tip anywhere on the active area of the pad to wake up the pad. 4. Verify that the LCD display shows at least the following indicators. Your MimioPad is now ready to use. Using MimioPad Using the Shortcut Keys Shortcut keys are available across the top of the active area of the pad. These keys allow you to quickly access features in the MimioStudio software. Selection tool Screen Clipping Pen Screen Annotation Highlighter Text Tool Eraser Spotlight Tool Cut Reveal Tool Copy Notebook Paste Tools New Page Recorder For more information about these features, see MimioStudio and MimioStudio Recorder. Changing the Pen Tip After a period of use you may need to replace the pen tip. Extra pen tips and a pen tip extractor are located inside the pad battery compartment. To change the pen tip 1. Squeeze the pen tip with the tip extractor and then pull out to remove the tip. 2. Push the new tip into the pen and then press the pen tip down on a hard surface to 151 MimioPad (Model Number: RCK-M01) secure. Pairing an Additional MimioPad with the Wireless Receiver To pair an additional MimioPad with the wireless receiver 1. Plug the wireless receiver into a USB port on your computer. 2. Turn on the power to the MimioPad. 3. Simultaneously, press the learning button on the back of the MimioPad and the learning button on the wireless receiver. The LCD screen on the MimioPad and the LED light on the wireless receiver will blink during the process. When the learning process is complete, the number on the LCD will show the number assigned to the additional pad (001 or greater). 152 Chapter 12 MimioMobile Using the MimioMobile app on a mobile device, teachers and students can collaborate using interactive whiteboard lessons. The MimioMobile app can be used alone with MimioStudio software or in conjunction with MimioTeach interactive system and other MimioClassroom products. The MimioMobile app is available for the following devices: n iPad® 2 or later, running iOS 5 or later n iPhone® 4 or later, running iOS 5 or later n iPod touch® 4th generation or later, running iOS 5 or later n Mobile device running Android™ 3.0 (Honeycomb) or later MimioMobile can be used by both students and teachers. Teachers can pass desktop control to any student mobile device and initiate group activities so that all students with a mobile device can simultaneously participate in an activity. Students can also use a mobile device with MimioMobile instead of a MimioVote unit. Mobile devices with the MimioMobile app can be used in conjunction with the new MimioPad tablet. For information about the MimioPad tablet, see MimioPad. Getting Started Review the following sections for more information about getting started with MimioMobile. n Installing the Software n Connecting Mobile Devices Installing the Software To start using MimioMobile, you must first do the following: n Download and install MimioStudio software from the Mimio website at www.mimio.com. n Install the MimioMobile app on the teacher mobile device and on each student mobile device. The MimioMobile app is available from the Apple App Store℠ and the Google Play™ Store. To activate the software 153 MimioMobile 1. Choose About MimioStudio from the Notebook menu. 2. Under Installed Software, select one of the following: l MimioMobile - to activate MimioMobile l MimioStudio - to activate MimioStudio 3. Enter the software license number in the License Number box. 4. Click OK to activate the software. Connecting Mobile Devices Once you have installed MimioStudio software and the MimioMobile app, you can connect the teacher and student mobile devices to your computer. Connecting a Teacher Mobile Device You can quickly connect a teacher mobile device to your computer using the MimioStudio Mobile Settings or Preferences. To connect the teacher mobile device 1. Start MimioStudio Preferences. 2. Select Mobile. 3. Tap on your mobile device to start MimioMobile. 4. Under Connection Methods, tap QR scan. 5. Tap the QR code image on the mobile device to launch the camera. 6. Align the guides on the device screen with the QR code in MimioStudio to scan the QR code. The device connects to your computer and the desktop is displayed on your mobile device. Connecting Student Mobile Devices You can connect student mobile devices using MimioStudio Class Manager. To connect a student mobile device 1. Do one of the following to start Class Manager: l From MimioStudio Tools, click the Applications button, Class Manager. , and then choose From the menu bar, click and then choose Class Manager. 2. Select the class to connect the device for, and then click Start Class. l 3. Tap on the student device to start MimioMobile. 4. Under Connection Methods, tap QR scan. 5. Tap the QR code image on the mobile device to launch the camera. 6. Align the guides on the device screen with the QR code in MimioStudio to scan the QR code. 7. On the mobile device, tap the name of the student using the device. 8. Tap Yes to confirm the selection. 154 Getting Started Using History Connect When you connect a mobile device to a computer, your connections are saved in the MimioMobile connection history. You can use this history to quickly reconnect your mobile device. Connections to Anonymous classes are not saved to the connection history. To connect your mobile device using connection history 1. Tap on your mobile device to start MimioMobile. 2. Under Connection Methods, tap History. 3. Select the class or teacher computer to connect to. 155 MimioMobile Using Manual Connect You can connect your mobile device to your computer manually, without scanning the QR code, by entering your network information. To manually connect your mobile device 1. Tap on your mobile device to start MimioMobile. 2. Under Connection Methods, tap Manual. 3. Tap one of the following: l Teacher - to connect the device as a Teacher device l Student - to connect the device as a Student device 4. Enter the required information, and then tap Connect. The required information to connect as a Teacher device can be found under the QR code in MimioStudio Mobile Settings/Preferences. The required information to connect as a Student device can be found under the QR code in Class Manager. Using MimioMobile Review the following sections to learn more about using MimioMobile. n Using the Shortcut Keys n Using Class Manager n Using MimioStudio Collaborate n Sharing Control n Using MimioStudio Vote Using the Shortcut Keys Shortcut keys are available across the top of the active area of the mobile device. These keys are always available on a teacher device, but are only available on a student device when the teacher has given the student desktop control. See Sharing Control for more information about sharing desktop control. The shortcut keys allow you to quickly access features in MimioStudio software. 156 Selection tool Redo Pen Tools Highlighter Screen Annotation Eraser Text Tool Cut MimioVote Copy MimioView Paste Control Undo Launch Using MimioMobile For more information about these features, see MimioStudio, MimioVote, and MimioView. Using Class Manager Using MimioStudio Class Manager, you can view the mobile device connection information, connect student mobile devices, and take class attendance. For information about connecting student devices, see Connecting Student Mobile Devices. The following table shows several ways to access Class Manager. To start from Do this Right-click , and then choose Menu bar Click MimioStudio Tools Click the Applications button, Class Manager. , and then choose Class Manager. Class Manager. , and then choose To view connection information 1. Select the class to view, and then click Start Class. 2. If connection information is necessary for troubleshooting, click Show Details under the QR code. Using MimioStudio Collaborate Using a mobile device with MimioMobile, you can conduct a group activity. The display automatically divides into individual workspaces, depending on the number of student mobile devices connected to your computer. You can use Collaborate in one of two ways. n Quick Collaborate - displays a blank page for each student n Collaborate - displays the current Notebook page for each student The following table shows several ways to access Collaborate. To start from Do this Right-click , and then choose Menu bar Click MimioStudio Tools Click the Applications button, Collaborate. , and then choose Quick Collaborate. Quick Collaborate. , and then choose Quick Do one of the following: MimioStudio Notebook n n Click the Collaborate button, . Choose Collaborate from the Tools menu. 157 MimioMobile Maximising a Workspace You can maximise a student workspace to highlight an individual workspace for the class. To maximise a workspace Double-click the student name at the bottom of the workspace to maximise the workspace. The selected workspace is displayed in full-screen mode. Using the Collaborate Toolbar When the teacher starts Collaborate, each student mobile device displays the Collaborate toolbar. Students use the tools available in the toolbar to draw and write in their workspace. Selection tool You can select and move items using the selection tool. Pen You can select the line colour and width. Highlighter You can select the line colour and width. Eraser You can select the line width. When the teacher exits from Collaborate, each student workspace is automatically archived as a separate MimioStudio Notebook page in the Collaborative Sessions folder in MimioStudio Gallery. Sharing Control You can pass desktop control to any active student mobile device. To share control 1. Do one of the following: l Click the Applications button, , and then choose Control. l Tap on the teacher mobile device. 2. Select the student device to pass control to. Using MimioStudio Vote A student mobile device with MimioMobile can be used along with MimioStudio Vote. The student mobile device can be used in place of a MimioVote voting unit. When the teacher starts a Vote activity, the answer choices are displayed on the student mobile device. For more information about MimioStudio Vote, see Using the Vote Toolbar. 158 Chapter 13 MimioProjector What's Included The MimioProjector package contains the following items: 1 3 2 CR2025 3V 4 5 1 Remote control 4 Power cord 2 Remote control battery 5 Projector with lens cap 3 VGA cable If you are missing any of the items above, contact Customer Support. 159 MimioProjector About MimioProjector The following figure shows the major components of the MimioProjector. Front View 3 4 1 5 Back View 2 6 7 Bottom View 8 9 8 160 1 Focus ring 6 Input/Output connection ports 2 Lens 7 Power connector 3 Control panel 8 Elevator feet 4 Lamp cover 9 Elevator feet spacers 5 IR Receiver 161 MimioProjector About the Control Panel The following figure shows the components of the MimioProjector control panel. POWER TEMP LAMP 3 4 2 5 6 RESYNC SOURCE 7 1 MENU 8 9 162 1 Navigation keys Navigate through menus and make selections. 2 Power button Turn the projector on and off. 3 Power status light Indicates the power status of the projector. 4 Lamp status light Indicates the projector lamp status. 5 Temperature status light Indicates the projector temperature status. 6 Source button Select an input signal. 7 Resync button Automatically synchronise the PC analogue timing to the optimised condition. 8 Menu/Exit button Open the menu screen or exit a menu. 9 IR receiver About the Remote Control The following figure shows the components of the MimioProjector remote control. 1 2 9 3 4 10 11 5 12 6 13 7 14 8 15 16 163 MimioProjector 164 1 Source Select an input signal. 2 Resync Automatically synchronise the PC analogue timing to the optimised condition. 3 HDMI Switch to HDMI input. 4 Video Switch to Composite Video or SVideo input. 5 3D Turn on and off the 3D menu. 6 Menu Open the menu screen or exit a menu. 7 Freeze Freeze or unfreeze the image on the screen. 8 Blank Hide or show the screen image. 9 Power Turn the projector on or off. 10 PC Switch to VGA-A/VGA-B input. 11 Keystone 12 Aspect ratio Select the desired aspect ratio. 13 Navigation keys Navigate through menus and make selections. 14 Volume up Increase the audio volume. 15 Volume down Decrease the audio volume. 16 Mute Mute the audio. / Adjust image until the sides are vertical. Getting Started About the Connection Ports The following figure shows the connection ports available on the MimioProjector . 1 10 3 2 11 4 12 5 6 13 14 7 8 9 15 16 1 Mini-USB 9 Audio output 2 HDMI 10 12V trigger relay (12V, 250mA) 3 VGA output 11 RS232 4 VGA in 1 12 VGA in 2 5 Audio in 1 (for VGA in 1) 13 Audio in 2 (for VGA in 2) 6 S-Video 14 Composite video input 7 Left/Right RCA audio input (for composite video input) 15 3.5 mm microphone input 8 Left/Right RCA audio input (for S-Video) 16 Power Getting Started Review the following topics to install and start using your MimioProjector. n Connecting the Projector n Setting Up the Remote Control n Turning On the Power 165 MimioProjector Connecting the Projector You can connect MimioProjector to a computer or other video source. 166 Getting Started Connecting to a Computer The following figure shows the connection methods available for connecting the MimioProjector to a computer. Monitor Notebook 4 2 4 LAN 1 2 Power outlet 2 3 4 5 6 7 8 Audio output Computer 1 Power cable (included) 5 RS232 cable 2 Audio cable 6 HDMI cable 3 VGA to DVI-A cable 7 USB cable 4 VGA cable (included) 8 12V DC jack +12V output 167 MimioProjector Connecting to a Video Source The following figure shows the connection methods available for connecting the MimioProjector to a video source. DVD player, set-top box, HDTV receiver Video output 3 1 2 9 5 6 5 6 5 3 Audio output Power outlet 8 7 4 S-Video output DVD player, set-top box, HDTV receiver +12V output 168 1 Power cable (included) 6 VGA to HDTV (RCA) cable 2 Microphone cable 7 HDMI cable 3 Audio cable jack/RCA 8 12V DC jack 4 S-Video cable 9 Composite video cable 5 Audio cable Getting Started Setting Up the Remote Control Before using the remote control for the first time, remove the transparent insulation tape. To set up the remote control 1. Press firmly and slide the battery holder out of the battery compartment. 2. Remove the battery from the battery holder. 25 20 LT R O C S 3. Remove the transparent insulation tape. 3V 25 20 LT O C R S 4. Replace the battery holder with the + polarity marking facing up as shown. 3V 25 LT R 20 O C M S 5. Slide the battery holder back into the battery compartment and press firmly. 3V 169 MimioProjector Turning on the power The projector has an auto-off feature which automatically turns the projector off when no input signal is received by the projector for a set amount of time. For information about setting the amount of time the projector will stay on before automatically turning off, see Auto Power Off on page 179. To turn the projector on 1. Securely connect the power cord and signal cable. When connected, the Power status light turns red. 2. Press on the control panel or on the remote control. The Power status light turns blue. 3. Turn on the source that you want to display on the screen (computer, notebook, video player, and so on). The projector detects the source automatically and displays the source image. 4. If multiple sources are connected to the projector, press Source on the control panel or on the remote control to switch between inputs. 170 Getting Started Turning Off the Power To turn the projector off 1. Press on the control panel or on the remote control. A confirmation message is displayed on the projector screen. 2. Press again to turn the projector off. The Power status light turns red and blinks rapidly. The projector fans continue to run for approximately one minute to ensure that the projector cools properly. When the system is finished cooling, the fans turn off and the Power status light turns solid red, indicating that the projector is in standby mode. 3. Unplug the power cord. 171 MimioProjector Status Lights Message Lamp status light Red Temperature status light Red Power status light Red Power status light Blue Power plug Flash ON to OFF 100ms Flash ON to OFF 100ms Flash ON to OFF 100ms -- Standby -- -- ON -- Power button ON -- -- -- ON -- Cooling state -- -- 0.5 second H (ON) 0.5 second L (OFF) flashing Power button OFF Cooling completed; Standby mode -- -- ON -- ON ON ON -- -- ON -- ON -- 0.5 second H (ON) 0.5 second L (OFF) flashing -- ON ON -- -- ON Firmware download Thermal sensor error The following message is displayed: 1. Make sure air inlets and outlets are not blocked. 2. Make sure the environment temperature is under 40° C Fan lock error The following message is displayed: The projector will switch off automatically. Lamp error (lamp, lamp driver, colour wheel) 172 Changing the Projector Settings Adjusting the Projected Image You can adjust the size and focus of the projected image. Resizing the Projected Image The size of the projected image depends on the distance of the projector from the screen. The following table describes the general guidelines for projector distance from the screen. Screen Size (16:10) Projection Distance (A) Projection Distance (B) Diagonal (inch) mm Inch mm Inch mm 70 1778 20.4 517 7.2 182 80 2032 23.5 596 10.3 262 87.2 2215 25.8 655 12.6 320 90 2286 26.7 677 13.5 343 100 2540 29.9 759 16.7 424 Projection Distance A (mm) = Screen size (mm) x 0.296. Tolerance is around 3.1%. For example, Projection Distance (655 mm) = Screen Size (2215 mm) x 0.296. Focusing the Projected Image Use the focus ring to adjust the focus of the projected image. Turn the ring until the image is clear. Changing the Projector Settings You can adjust the projector image and change the projector settings using the projector menus. The projector automatically detects the input source. To change the projector settings 1. Press Menu on the control panel or on the remote control to display the projector main menu. 173 MimioProjector 2. Use the navigation keys to select the desired menu item. 3. If the menu item has an arrow icon , press ► to display the submenu for that setting, and then use the navigation keys to select the desired menu item. 4. Press ◄ or ► to adjust the selected setting. 5. Press Menu to return to the previous menu or to exit the menu screen. Navigating the Projector Menu The following table describes the structure of the projector menu and submenus. 174 Main Menu Submenu Settings PICTURE Colour Mode Brightest / PC / Movie / Game / User Wall Colour White / Light Yellow / Light Blue / Pink / Dark Green Brightness 0~100 Contrast 0~100 Sharpness 0~31 Saturation 0~100 Hue 0~100 Gamma 0~3 Colour Temp. Low / Mid / High Colour Space AUTO / RGB / YUV Changing the Projector Settings Main Menu Submenu Settings SCREEN Aspect Ratio AUTO / 4:3 / 16:9 / 16:10 Phase 0~31 Clock -50~50 H. Position -10~10 V. Position -10~10 Digital Zoom 1~10 V Keystone -20~20 Ceiling Mount Front / Front Ceiling / Rear / Rear Ceiling Language English / Deutsch / Français / Italiano / Español / Português / Polski / Русский / Svenska / Norsk / 简 体中文 / 日本語 / 한국어 / Türkçe / 繁體中 文/Nederlands / ‫ﻲﺑﺮﻋ‬ SETTING Menu Location Closed Caption Off / CC1 / CC2 / CC3 / CC4 VGA Out (Standby) Off / On Auto Screen(12V out) Off / On Test Pattern Off / On Security AUDIO Security Off / On Change Password 000000 Reset No / Yes Mute Off / On Volume 0~32 Microphone Volume 0~32 175 MimioProjector Main Menu Submenu Settings OPTIONS Logo Default / User Logo Capture Auto source Off / On Input HDMI / VGA-A / VGA-B / S-Video / COMPOSITE Auto Power Off (min) 0~120 Lamp Setting Lamp Hours Used (Normal) Lamp Hours Used (ECO) Lamp Life Reminder Lamp Power Mode ECO / Normal / Extreme Dimming Clear Lamp Hours No / Yes Dynamic Black Off / On High Altitude Off / On Dust Filter Reminder Filters Remind (Hour) Cleaning Up Reminder Information 176 Off / On No / Yes Model Name / SNID / Source / Resolution / Software Version / Colour Space / Aspect Ratio Changing the Projector Settings Main Menu 3D Submenu Settings 3D AUTO / Off / On 3D Invert Off / On 3D Format Frame Packing / Side-by-Side (Half) / Top and Bottom / Frame Sequential / Field Sequential 1080p @ 24 INTERACTIVE 96Hz / 144Hz Interactive Settings Off / IR Camera Adjusting the 3D Settings You can adjust the 3D settings for your projector. 3D You can choose how the projector handles 3D images. n Auto - select the 3D image automatically whenever an HDMI 1.4a 3D timing identification signal is detected n Off - turn off 3D functionality n On - turn on 3D functionality 3D Invert If you see a discrete or overlapping image while using DLP 3D glasses, you may need to turn on this feature to get the best picture. This feature adjusts the left/right image sequence. 3D Format When using 3D mode, select the 3D format that matches the format used by the input source. n Frame Packing - supports HDMI 1.4a 3D input signals n Side-by-Side (Half) - supports HDMI 1.4a 3D input signals n Top and Bottom - supports HDMI 1.4a 3D input signals n Frame Sequential - supports DLP Link 3D input signals from VGA / HDMI connector and HQFS 3D input signals from Composite/S-video connector n Field Sequential - supports HQFS 3D input signals from Composite/S-video connector 1080p @24 Use this feature to select 96 or 144 Hz refresh rate as using 3D glasses in the 1080p @ 24 frame packing. 177 MimioProjector Adjusting the Interactive Settings Use this setting to turn the Interactive Pen function on and off. n IR Camera - the Interactive Pen function is on n Off - the Interactive Pen function is off Before turning on Interactive, unplug the mini-USB cable that connects your computer to the projector. After turning on Interactive, plug the mini-USB cable back in. Notes l This feature is only available when displaying images from HDMI/VGA input. l This feature is not available when using 3D or Dynamic Black. An external IR camera is required to use the Interactive feature. The IR camera must be connected to the projector before the projector is mounted. To connect the IR camera 1. Remove the camera connector cover from the projector. 2. Plug the camera into the camera connector. Adjusting the Options From the Options menu, you can change many of the projector settings as well as view the projector information. Logo You can select the image to display on projector startup. n Default- displays the default screen on projector startup n User - displays an image of your choice on projector startup See Logo Capture on page 179 for information on selecting an image. 178 Changing the Projector Settings Logo Capture You can capture an image to display on projector startup. Press ► to capture the image currently displayed on the screen. Notes l Ensure that the displayed image does not exceed the native resolution of the projector (WXGA:1280x800). l Logo Capture is not available when 3D is enabled. l The aspect ratio should be set to Auto before using image capture. Auto Source Select how to handle searching for an input source when the projector loses signal from the current input source. n On - the projector searches for signals from other input sources when the current input signal is lost n Off - the projector only searches for a signal from the current input connection when the current input signal is lost Input Use this option to select the input types that the projector will search for. 1. From the Options menu, select Input, and then press ►. 2. Select the input that you do not want the projector to search for, and then press ► to clear the tick box for the selected input type. Auto Power Off The projector has an auto-off feature which automatically turns the projector off when no input signal is received by the projector for a set amount of time. You can set the amount of time the projector will stay on before automatically turning off . Lamp Setting Lamp Hours Used (Normal) View the amount of time the projector has been used in normal lamp power mode. Lamp Hours Used (ECO) View the amount of time the projector has been used in ECO lamp power mode. Lamp Life Reminder You can choose whether or not the projector displays a warning message when the lamp is nearing end of life. 179 MimioProjector Lamp Power Mode The following lamp power modes are available: n Normal - the projector lamp is at full brightness n ECO - the projector lamp is dimmed to reduce power consumption, extending the life of the lamp n Extreme Dimming - the projector lamp is dimmed 30 percent to reduce power consumption, extending the life of the lamp Clear Lamp Hours Reset the lamp hours counter after replacing the projector lamp. Dynamic Black Use Dynamic Black to display the image with the optimum contrast by automatically providing signal compensation to suit the currently displayed image. Notes l This feature is only available when the colour mode is set to Movie. l This feature is not available when using 3D or Interactive. l Lamp Power Mode cannot be used with this feature. High Altitude The fan power required varies depending on the altitude you are at. Set this option appropriately to ensure that the projector cools properly. n On - the built-in fans automatically run at a variable speed according to the internal temperature of the projector n Off - the built-in fans run at high speed Select this option when using the projector at altitudes above 5000 feet/1524 metres. Filters Remind You can set a time to be reminded to perform filter maintenance. 180 n Filters Remind (Hour) - Set the number of hours that pass before you are reminded to clean the dust filters. The dust filters should be cleaned after every 500 hours of use. Clean the filters more frequently if the projector is used in a dusty environment. n Cleaning Up Reminder - Once you have cleaned or replaced the dust filters, reset the timer to be reminded the next time the filters require maintenance. Changing the Projector Settings Information Display the following projector information: n Model name n Software version n SNID n Colour space n Source n Aspect ratio n Resolution Adjusting the Picture Many settings are available for adjusting the picture displayed by the projector. Colour Mode The following optimized colour modes are available for viewing various types of images. n Brightest - for brightness optimisation n PC - for viewing meeting presentations n Movie - for viewing video content n Game - for viewing game content n User - for storing your manually configured settings Wall Colour Select the wall colour that the image is projected onto. The projector settings automatically adjust to show the correct image tone, compensating for colour deviation due to wall colour. Brightness Adjust the brightness of the image. Press ◄ to darken image. Press ► to lighten the image. Contrast The Contrast controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press ◄ to decrease the contrast. Press ► to increase the contrast. Sharpness Adjust the sharpness of the image. This setting is only supported when Movie is selected as the colour mode. Press ◄ to decrease the sharpness. Press ► to increase the sharpness. 181 MimioProjector Saturation Adjust the colour saturation of the image. The saturation ranges from black and white to fully saturated colour. This setting is only supported when Movie is selected as the colour mode. Press ◄ to decrease the amount of saturation in the image. Press ► to increase the amount of saturation in the image. Hue Adjust the red/green colour balance. This setting is only supported when Movie is selected as the colour mode. Press ◄ to increase the amount of green in the image. Press ► to increase the amount of red in the image. Gamma Adjusts the representation of dark scenery. The greater the gamma value, the bright dark scenery will appear. Press ◄ to decrease the gamma value. Press ► to increase the gamma value. Colour Temperature At a higher colour temperature, the image appears colder; at a lower colour temperature, the image appears warmer. Colour Space Select the appropriate colour matrix type; Auto, RGB, or YUV. Adjusting the Screen You can adjust the screen and display settings for the projector. Aspect Ratio The following aspect ratios are available for scaling the projected image. 182 n Auto - keeps the image the original width-to-height ratio and maximises the image to fit native horizontal or vertical pixels n 4:3 - scales the image to fit the screen and displays using a 4:3 ratio n 16:9- scales the image to fit the width of the screen and adjusts the height to display the image using a 16:9 ratio n 16:10 - scales the image to fit the width of the screen and adjusts the height to display the image using a 16:10 ratio Changing the Projector Settings Phase Change the signal timing of the display to match the timing of the graphics card for your computer. If the image appears unstable or flickers, use this setting to correct it. Press ◄ to decrease the signal timing. Press ► to increase the signal timing. Clock Change the display data frequency to match the frequency of the graphics card for your computer. Adjust this setting only if the image appears to flicker vertically. Press ◄ to decrease the data frequency. Press ► to increase the data frequency. Horizontal Position Adjust the horizontal position of the projected image. The range for this setting depends on the input source. Press ◄ to move the image left. Press ► to move the image right. Vertical Position Adjust the vertical position of the projected image. The range for this setting depends on the input source. Press ◄ to move the image down. Press ► to move the image up. Digital Zoom Use this setting to zoom into the projected image. Press ◄ to reduce the size of the image. Press ► to magnify the image on the projection screen. Vertical Keystone Use this setting to adjust the vertical distortion of the image. If the image appears trapezoidal, adjust this setting to make the image appear rectangular. Press ◄ or ► to adjust the vertical distortion of the image. Ceiling Mount Select the location of the ceiling mounted projector. n Front - the image is projected straight onto the screen. n Front Ceiling - the image turns upside down (default). n Rear - the image appears reversed. n Rear Ceiling - the image appears reversed and upside down. 183 MimioProjector Adjusting the General Settings You can adjust many of the general settings for your projector. Language Select the language to use when displaying the projector menus. Menu Location Select the location for the projector menu to display. Top left Top right Centre Bottom left Bottom right Closed Caption The following closed caption options are available: n Off n CC1 n CC2 n CC3 n CC4. VGA OUT (Standby) You can enable the VGA OUT connection to display the projector image on an additional display. Select On to enable the VGA OUT connection. Auto Screen (12V Out) If you are using the projector with a screen that is switched on, you can choose to automatically lower and raise the screen when the projector is switched on and off. 184 n On - the screen lowers automatically when you turn the projector on and raises automatically when you turn the projector off n Off - the screen does not lower and raise automatically when you switch the projector on and off Changing the Projector Settings Test Pattern You can display a test pattern to test the image settings. n On - show the test pattern n Off - hide the test pattern Security You can choose to require a password to be entered each time the projector is turned on. The following security settings are available: n On - the user must enter a password in order to switch the projector on n Off - the user is not required to enter a password in order to switch the projector off Setting the Password If the password is entered incorrectly 3 times, the projector automatically shuts down. If you forget your password, contact Mimio Customer Support for assistance. To set the password for the first time 1. From the Security menu, select Change Password, and then press ►. 2. Use the navigation keys to enter 000000 as the current password, and then press ►. If the password is entered incorrectly 3 times, the projector automatically shuts down. 3. Use the navigation keys to enter a new password, and then select ENTER to confirm. The password must be six digits. 4. Use the navigation keys to enter the new password again, and then select ENTER to confirm. To change the password 1. From the Security menu, select Change Password, and then press ►. 2. Use the navigation keys to enter the current password, and then press ►. If the password is entered incorrectly 3 times, the projector automatically shuts down. 3. Use the navigation keys to enter a new password, and then select ENTER to confirm. The password must be six digits. 4. Use the navigation keys to enter the new password again, and then select ENTER to confirm. Reset Resetting the projector resets all projector settings to the factory defaults. Select Yes to reset the projector. 185 MimioProjector Adjusting the Volume You can adjust the projector volume settings. Mute You can choose to mute the projector audio. You can also press Mute on the remote control to turn mute on and off. Volume Use this setting to increase or decrease the speaker volume. Press ◄ to decrease the volume. Press ► to increase the volume. You can also use the volume buttons on the remote control to adjust the volume. Microphone Volume Use this setting to increase or decrease the microphone volume. Press ◄ to decrease the volume. Press ► to increase the volume. Caring for MimioProjector Replacing the Remote Control Battery To ensure safe operation, please observe the following precautions: n Use only CR2025 type batteries. Using the incorrect battery type may cause explosion. n Avoid contact with water or liquid. n Do not expose the remote control to moisture or heat. n Do not drop the remote control. n If the battery leaks while inserted in the remote control, carefully wipe the case clean and install new battery. n Dispose of used battery according to battery instructions. To replace the battery 1. Press firmly and slide the battery holder out of the battery compartment. 2. Remove the old battery from the battery holder. 3. Insert a new battery into the battery holder with the + polarity marking facing up, as 186 Caring for MimioProjector S LT R C O 20 2 5 shown. 3V 25 20 LT R O C M S 4. Slide the battery holder back into the battery compartment and press firmly. 3V Replacing the Lamp The projector automatically detects the lamp life. When the lamp is nearing end of life, a warning is displayed on the screen. When the warning appears, contact Mimio Customer Support to order a replacement lamp as soon as possible. Make sure the projector is off and has cooled down for at least 60 minutes before changing the lamp. Notes l MimioProjector uses an OSRAM P-VIP 240/0.8 E20.8 bulb. l The screws on the lamp cover and the lamp cannot be removed. l The projector cannot be turned on while the lamp cover is removed. l Do not touch the glass area of the lamp. Oils from your skin can cause the lamp to shatter. Use a dry cloth to clean the lamp module if the lamp is accidentally touched. To remove the lamp module 1. Press the power button to turn off the projector. 2. Allow the projector to cool down for at least 60 minutes. 3. Unplug the power cable. 4. Using a screwdriver, loosen the two screws on the lamp cover. 5. Lift and remove the lamp cover. 6. Using a screwdriver, loosen the two screws on the lamp module. 7. Pull the lamp handle up and slowly and carefully remove the lamp module. 187 MimioProjector 1 2 3 4 To insert the new lamp module 1. Slowly and carefully insert the lamp module into the lamp compartment and push the lamp handle down. 2. Using a screwdriver, tighten the two screws on the lamp module. 3. Replace the lamp cover. 4. Using a screwdriver, tighten the two screws on the lamp cover. 5. Plug the power cable into a wall socket. 6. Press the power button to turn on the projector. 7. Clear the lamp hours. See Clear Lamp Hours on page 180 for information about clearing the lamp hours. Cleaning the Dust Filters The dust filters should be cleaned after every 500 hours of use. Clean the filters more frequently if the projector is used in a dusty environment. When the dust filters need to be cleaned, a warning is displayed on the screen. When the warning appears, clean the dust filters as soon as possible. Make sure the projector is off before cleaning the dust filters. Notes l The dust filters should be used in dusty environments. l Properly maintaining the dust filters prevents overheating of the projector and related damage. To clean the dust filters 1. Press the power button to turn off the projector. 2. Unplug the power cable. 3. Pull the latch and slowly and carefully remove the dust filters from the projector. 188 Getting Help 4. Use a vacuum to clean the dust filters. 5. Slide the dust filters back into the projector. 6. Plug the power cable into a wall socket. 7. Press the power button to turn on the projector. 8. Reset the filter maintenance reminder. See Filters Remind on page 180 for information about resetting the filters reminder. Getting Help Review this chapter if you encounter a problem with your projector. If you are unable to solve a problem, this chapter also describes how to contact Mimio Technical Support. n General Troubleshooting n Image Troubleshooting n 3D Troubleshooting n Sound Troubleshooting n Remote Control Troubleshooting n Contacting Mimio General Troubleshooting Review this section if you encounter a general problem with your projector. Projector stops responding to all controls 1. Press the power button to turn the projector off. 2. Unplug the power cord. 3. After 20 seconds or more, plug the power cord back in. 4. Press the power button to turn the projector on. 189 MimioProjector Lamp burns out or makes a popping sound When the lamp reaches end of life, it burns out and may make a loud popping sound. The projector will not turn on again until the lamp module is replaced. For information about replacing the lamp, see Replacing the Lamp on page 187. Image Troubleshooting Review this section if you encounter a problem with the projector image. No image is displayed n Ensure all cables and power connections are correctly and securely connected as described in Connecting the Projector on page 166. n Ensure the pins of connectors are straight and not broken. n Ensure that the projection lamp is securely installed. n Ensure that the Blank feature is turned off. A partial, scrolling, or incorrect image is displayed n Press ReSync on the remote control. If you are using a computer as the input source, do the following: 1. Verify that the display resolution setting for your computer is set to 1080p or lower. Refer to the documentation for your computer for information about changing the display resolution for your computer. If you experience difficulty changing resolution or your monitor freezes, restart all equipment including the projector. 2. If you are using a notebook computer, press the keyboard buttons needed to toggle the output setting. Notebook Brand Function Keys Acer [Fn]+[F5] Asus [Fn]+[F8] Dell [Fn]+[F8] Gateway [Fn]+[F4] IBM/Lenovo [Fn]+[F7] HP/Compaq [Fn]+[F4] NEC [Fn]+[F3] Toshiba [Fn]+[F5] Mac Apple System Preference -> Display -> Arrangement -> Mirror display The notebook computer display is not displaying an image Some notebook computers may deactivate the screens when a second display device is in use. Each has a different way to be reactivated. Refer to the documentation for your computer for detailed information. 190 Getting Help Image is unstable or flickering n Adjust the Phase setting on the projector. See Phase on page 183 for information about changing the Phase setting. n Change the monitor colour setting on your computer. Image has vertical flickering bar n Adjust the Clock setting on the projector. to make an adjustment. See Clock on page 183 for information about changing the Clock setting. n Check and reconfigure the display mode of your graphic card to make it compatible with the projector. Image is out of focus n Adjust the focus ring on the projector lens. n Make sure the projection screen is within the required distance. Image is stretched when displaying 16:9 DVD image n When you play anamorphic DVD or 16:9 DVD, the best image is displayed when the projector is set to use 16: 9 format. n If displaying a 4:3 format DVD title, set the projector to use 4:3 format. If the image is still stretched, verify that the format setting on your DVD player is set correctly. Image is too small or too large n Move the projector closer to or further from the screen. n Adjust the aspect ratio setting on the projector. See Aspect Ratio on page 182for information about adjusting the aspect ratio. Image is displayed with slanted sides n If possible, reposition the projector so that the image is centred on the screen. n Adjust the vertical keystone setting on the projector. See Vertical Keystone on page 183 for information about adjusting this setting. Image is reversed Verify that the ceiling mount setting on the projector is set correctly. See Ceiling Mount on page 183 for information about adjusting this setting. 3D Troubleshooting Review this section if you encounter a problem with 3D mode. A blurry double image is displayed Make sure the 3D feature is off. For information about turning off 3D, see 3D on page 177. 191 MimioProjector Two images are displayed side-by-side Set the 3D format to Side-by-Side (Half). For information about changing the 3D format, see 3D Format on page 177. Image not displayed in 3D n Make sure your 3D glasses are switched on. n Make sure the batteries in the 3D glasses have sufficient charge. n Set the 3D format to Side-by-Side (Half). For information about changing the 3D format, see 3D Format on page 177. Sound Troubleshooting Review this section if you encounter a problem with the projector sound. n If you are playing sound from an external source, make sure you have the audio cable securely connected to the source device and the audio input on the projector. n Make sure no external speakers are connected. n Make sure the volume is not set to the minimum. n Make sure the Mute feature is off. Remote Control Troubleshooting Review this section if you encounter a problem with the projector remote control. 192 n Make sure the operating angle of the remote control is within ±30° both horizontally and vertically of one of the IR receivers on the projector. n Make sure there are no obstructions between the remote control and the projector. n Move to within 7 m (±0°) of the projector. n Make sure the battery is inserted correctly. n Replace the battery. Compatibility Modes Compatibility Modes VGA Analogue PC Signal Modes Resolution V. Frequency [Hz] H. Frequency [Hz] VGA 640x480 60 31.5 640x480 67 35.0 640x480 72 37.9 640x480 75 37.5 640x480 85 43.3 640x480 120 61.9 IBM 720x400 70 31.5 SVGA 800x600 56 35.1 800x600 60 37.9 800x600 72 48.1 800x600 75 46.9 800x600 85 53.7 800x600 120 77.4 Apple, MAC II 832x624 75 49.1 XGA 1024x768 60 48.4 1024x768 70 56.5 1024x768 75 60.0 1024x768 85 68.7 1024x768 120 99.0 193 MimioProjector Modes Resolution V. Frequency [Hz] H. Frequency [Hz] Apple, MAC II 1152x870 75 68.7 SXGA 1280x1024 60 64.0 1280x1024 72 77.0 1280x1024 75 80.0 1280x960 60 60.0 1280x960 75 75.2 SXGA+ 1400x1050 60 65.3 UXGA 1600x1200 60 75.0 Modes Resolution V. Frequency [Hz] H. Frequency [Hz] WXGA 1280x720 60 44.8 1280x800 60 49.6 1366x768 60 47.7 1440x900 60 59.9 1680x1050 60 65.3 QuadVGA Extended Wide Timing WSXGA+ 194 Compatibility Modes Component Signal Modes Resolution V. Frequency [Hz] H. Frequency [Hz] 480i 720x480(1440x480) 59.94(29.97) 15.7 576i 720x576(1440x576) 50(25) 15.6 480p 720x480 59.94 31.5 576p 720x576 50 31.3 720p 1280x720 60 45.0 1280x720 50 37.5 1920x1080 60(30) 33.8 1920x1080 50(25) 28.1 1920x1080 23.98/24 27.0 1920x1080 60 67.5 1920x1080 50 56.3 1080i 1080p 195 MimioProjector HDMI Digital PC Signal 196 Modes Resolution V. Frequency [Hz] H. Frequency [Hz] VGA 640x480 60 31.5 640x480 67 35.0 640x480 72 37.9 640x480 75 37.5 640x480 85 43.3 640x480 120 61.9 IBM 720x400 70 31.5 SVGA 800x600 56 35.1 800x600 60 37.9 800x600 72 48.1 800x600 75 46.9 800x600 85 53.7 800x600 120 77.4 Apple, MAC II 832x624 75 49.1 XGA 1024x768 60 48.4 1024x768 70 56.5 1024x768 75 60.0 1024x768 85 68.7 1024x768 120 99.0 Compatibility Modes Modes Resolution V. Frequency [Hz] H. Frequency [Hz] Apple, MAC II 1152x870 75 68.7 SXGA 1280x1024 60 64.0 1280x1024 72 77.0 1280x1024 75 80.0 1280x960 60 60.0 1280x960 75 75.2 SXGA+ 1400x1050 60 65.3 UXGA 1600x1200 60 75.0 Modes Resolution V. Frequency [Hz] H. Frequency [Hz] WXGA 1280x720 60 44.8 1280x800 60 49.6 1366x768 60 47.7 1440x900 60 59.9 1680x1050 60 65.3 QuadVGA Extended Wide Timing WSXGA+ 197 MimioProjector Video Signal Modes Resolution V. Frequency [Hz] H. Frequency [Hz] 480p 640x480 59.94/60 31.5 480i 720x480(1440x480) 59.94(29.97) 15.7 576i 720x576(1440x576) 50(25) 15.6 480p 720x480 59.94 31.5 576p 720x576 50 31.3 720p 1280x720 60 45.0 1280x720 50 37.5 1920x1080 60(30) 33.8 1920x1080 50(25) 28.1 1920x1080 23.98/24 27.0 1920x1080 60 67.5 1920x1080 50 56.3 Resolution V. Frequency [Hz] H. Frequency [Hz] 720p 50 31.5 720p 59.94/60 15.7 1080p 23.98/24 15.6 1080i 50 31.5 1080i 59.94/60 31.3 720p 50 45.0 720p 59.94/60 37.5 1080p 23.98/24 33.8 1080i 1080p HDMI 1.4a Mandatory 3D Timing - Video Signal Modes Frame Packing Side-by-Side (Half) Top and Bottom 198 Technical and Environmental Information Technical and Environmental Information This chapter contains technical information for the MimioProjector. For product specifications and compliance information, visit the Documentation section of the Support area of our website at www.mimio.com. Usage Notice Follow all warnings, precautions, and maintenance as recommended in this user guide. Warnings n Do not look into the projector lens when the lamp is on. The bright light may hurt and damage your eyes. n To avoid the risk of fire or electric shock, do not expose the projector to rain or moisture. n Do not open or disassemble the projector as this may cause electric shock. n When replacing the lamp, allow the unit to cool down first. Follow the instructions as described under Replacing the Lamp on page 187. n The projector automatically detects the life of the lamp. Be sure to replace the lamp when the projector displays the lamp warning message. n After replacing the projector lamp, reset the lamp hours setting. See Clear Lamp Hours on page 180 for information about resetting the lamp hours. n When turning the projector power off, ensure that the cooling cycle completes before disconnecting the power. Allow 10 seconds for the projector to cool down. n Do not block the light path between the light source and the lens with any object. Doing so could cause the object to catch fire. n Do not look into or point the laser pointer on your remote control into any person's eyes. Laser pointers can cause permanent damage to eyesight. Precautions n Turn off and unplug the power plug from the AC outlet before cleaning the product. n Use a soft dry cloth with mild detergent to clean the display housing. n Disconnect the power plug from the AC outlet if the product is not being used for a long period of time. 199 MimioProjector Do not do the following n Clean the lens. n Block the ventilation slots and openings on the unit. n Use abrasive cleaners, waxes, or solvents to clean the unit. n Use under the following conditions: l In extremely hot, cold, or humid environments. l Ensure that the ambient room temperature is between 5°C and 40°C. l Ensure relative humidity is a maximum of 80%, non-condensing. l In areas susceptible to excessive dust and dirt. l Near any appliance generating a strong magnetic field. l In direct sunlight. Regulation & Safety Notices This section lists the general notices for your projector. FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: n Reorient or relocate the receiving antenna. n Increase the separation between the device and receiver. n Connect the device to an outlet on a circuit different from that to which the receiver is connected. n Consult the dealer or an experienced radio/television technician for help. Notice Shielded cables: All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Caution Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to operate this projector. 200 Technical and Environmental Information Operating Conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian Users This Class B digital apparatus complies with Canadian ICES-003. Remarque à l’intention des utilisateurs canadiens Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries n EMC Directive 2004/108/EC (including amendments) n Low Voltage Directive 2006/95/EC n R & TTE Directive 1999/5/EC (if product has RF function) Projector Mount Safety Notices Read these warnings carefully and use the product as intended. n The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation. n The wall mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising from human factors or natural disasters, such as an earthquake or typhoon. n The wall mount must be installed by professional personnel only. n To avoid any hazard caused by falling objects, a minimum of two persons are needed to install or remove the wall mount. n Maintain ample space around the projector to ensure good ventilation. n To ensure safety and avoid any accident, investigate the structure of the wall and select an appropriate and durable location for the product before installing. n The wall must have load-carrying capability to sustain more than four times the total weight of the projector and the wall mount. Also make sure the wall has enough strength to withstand earthquakes and other shocks. n Check the areas around the installation location carefully. l Do not install the product in an area subject to high temperature, humidity, or contact with water. l Do not install the product near air conditioner vents. l Do not install the product in a location subject to dust or fumes. l Do not install the product on slanted surfaces; install only on vertical walls. l Do not install the product in an area subject to vibrations or shocks. 201 MimioProjector l 202 Do not install the product in an area subject to direct exposure to bright light; doing so may cause eye fatigue when viewing the display panel. n Do not modify any accessory or use broken parts. Contact Mimio Customer Support with any questions. n Tighten all screws, but do not apply excessive torque to any screw. Excessive torque may break or damage the screw or screw threads. n The wall mount is rated for a maximum load of 15 kg (33 lbs.). n Do not hang or place any objects on the wall mount other than the projector. n Drill holes and screws remain in the wall once the projector and wall mount are removed. Stains may occur after extended use. Chapter 14 MimioStudio Recorder MimioStudio Recorder can capture a live desktop, synchronized with audio, as a video file. You can save the file as an MP4 file. The file can be played back in most media players. To import a video file you have already created elsewhere into MimioStudio Notebook, see Customizing the Content of the Gallery and Importing Gallery Items into a MimioStudio Notebook. Using MimioStudio Recorder MimioStudio Recorder allows you to record your Mimio interactions as an MP4 movie file with the option to record audio as well. The following table shows several ways to access MimioStudio Recorder. To start from Do this Menu bar Click MimioStudio Tools Click the Applications button and then choose Recorder. and then choose Recorder. Recording a Presentation MimioStudio Recorder can be used to easily record presentations using the standard record, pause, stop and play features. To start recording 1. Start MimioStudio Recorder. 2. Click the arrow to the right of the Record button, option from the list. Option and then choose a recording Description Record Desktop Records the entire desktop. (Default) Record Area Records a selected area of the screen. 3. Just before you start your presentation, click the Record button, . 4. If you chose Record Area, drag a selection box around the area to record. While recording, MimioStudio Recorder automatically minimises and is displayed in the menu bar as the MimioStudio Recorder icon, . To pause recording 203 MimioStudio Recorder Click  on the menu bar. This pauses the recording and opens the MimioStudio Recorder window. To resume recording Click the Record button, . To stop recording 1. Click  on the menu bar. This pauses the recording and opens the MimioStudio Recorder window. 2. Click the Stop button, . To preview a recording Click the Play button, . Your default media player is started and your recording plays automatically. Close your media player before starting a new recording. To save a recording 1. Choose Save from the File menu. 2. From the Save As dialog box, enter a name for the file in the Save As box. 3. Click Save. 204 Chapter 15 Customizing MimioStudio This chapter describes the general features of MimioStudio Preferences. The following table shows several ways to access MimioStudio Preferences. To start from Do this Menu bar Click MimioStudio Notebook Do one of the following: n n and then choose Preferences. Click  on the status bar. Choose Preferences from the Notebook menu. Do one of the following: MimioStudio Gradebook n n Click  on the status bar. Choose Preferences from the Notebook menu. MimioStudio Preferences contains options for setting and customising the properties and characteristics of your MimioClassroom system, including Classroom Devices, Gradebook, Ink Capture, Interactive, Language, Notebook, Recorder, and Vote. To change the preferences 1. From the MimioStudio Preferences dialog box select the setting you want to change from the list on the left. 2. Make the changes you desire to the preferences. See later sections in this chapter for a complete description of all preferences. 3. Click Apply. Adjusting the Classroom Devices Preferences The Classroom Devices preferences displays a list of all MimioClassroom devices that are connected or are available to connect to your computer. You can connect to any available devices using the Classroom Devices preferences. To connect to an available MimioClassroom device 1. Select the device to connect to from the Devices list. 2. Click Connect. Adjusting the Tablet Devices Preferences Adjusting the Ink Capture Preferences The Ink Capture preferences allow you to do the following: 205 Customizing MimioStudio n Change the surface size for a connected MimioTeach or Mimio Interactive device n Change the mounting location for a Mimio Interactive device n Change the width and colour assignment for each MimioCapture or Mimio Capture Kit pen These preferences are only used when your MimioTeach or Mimio Interactive device is used to capture digital ink. To adjust the preferences for a MimioTeach or Mimio Interactive device 1. Choose the device to adjust from the Device list. 2. Make the changes you desire to the preferences. 3. Click Apply. To adjust surface size for a MimioTeach or Mimio Interactive device Do one of the following: l Choose a size from the Surface Size list. l Choose Custom from the Surface Size list and enter the desired values into the Width and Height boxes. l Click Auto Size and touch a MimioCapture or Mimio Capture Kit pen at the location shown in the Auto Size dialog box. To adjust the mounting location for a Mimio Interactive bar Choose a mounting location from the Device Mounting list. The sensors on the Mimio Interactive bar must point in toward the writing surface. 206 Adjusting the Ink Capture Preferences Location Description Vertical – Top Left Default The Mimio Interactive bar is mounted vertically and aligned with the top left corner of the whiteboard (maximum size is 4’ high x 8’ wide). Vertical – Top Right The Mimio Interactive bar is mounted vertically and aligned with the top right corner of the whiteboard (maximum size is 4’ high x 8’ wide). Vertical – Bottom Left The Mimio Interactive bar is mounted vertically and aligned with the bottom left corner of the whiteboard (maximum size is 4’ high x 8’ wide). Vertical – Bottom Right The Mimio Interactive bar is mounted vertically and aligned with the bottom right corner of the whiteboard (maximum size is 4’ high x 8’ wide). Horizontal – Top Left The Mimio Interactive bar is mounted horizontally and aligned with the top left corner of the whiteboard (maximum size is 8’ high x 4’ wide). Horizontal – Top Right The Mimio Interactive bar is mounted horizontally and aligned with the top right corner of the whiteboard (maximum size is 8’ high x 4’ wide). Horizontal – Bottom Left The Mimio Interactive bar is mounted horizontally and aligned with the bottom left corner of the whiteboard (maximum size is 8’ high x 4’ wide). Horizontal – Bottom Right The Mimio Interactive bar is mounted horizontally and aligned with the bottom right corner of the whiteboard (maximum size is 8’ high x 4’ wide). This feature is not necessary for MimioTeach. When using MimioTeach with MimioCapture, the MimioTeach bar is always attached to the MimioCapture tray. When using MimioTeach without MimioCapture, the MimioTeach bar can be mounted anywhere on the whiteboard. To adjust the pen preferences 1. Click Pens. The Pens dialog box appears. 2. Choose the MimioCapture or Mimio Capture Kit pen to adjust from the Pen list. 3. To adjust the line thickness of the pen, drag the Pen Width slider. Alternately, enter a value into the Pen Width box. 4. To adjust the pen colour, select a colour from the Pen Colour palette. For additional colour choices, click More Colours. 5. Click OK. To view device information 207 Customizing MimioStudio Click Preferences. The dialog box appears showing the device information, environmental analysis and device memory. To reset to the default device preferences Click Defaults. Adjusting the Interactive Preferences The Interactive preferences allow you to calibrate or enable (if calibration has already been done) Interactive mode. The Interactive preferences also contain settings for changing the functions of the MimioTeach stylus, Mimio Interactive mouse, MimioTeach bar, MimioCapture tray buttons and Mimio Interactive bar buttons. General Preferences Setting Description Use previous calibration Prevents you from having to calibrate each time you start Interactive mode. Select this setting if you have a permanently installed whiteboard and projector. Automatically enable when a device is detected Automatically starts Interactive mode when a MimioTeach or Mimio Interactive bar is connected to your computer. Actions and Commands Preferences Setting Description Action List of the MimioTeach stylus, Mimio Interactive mouse, MimioTeach bar, Mimio Interactive bar and MimioCapture tray buttons. Function List of the functions that you can associate with a MimioTeach stylus, Mimio Interactive mouse, MimioTeach bar, Mimio Interactive bar or MimioCapture tray button. Adjusting the Language Preferences You can change the display language for MimioStudio software so that you can work in a language that is most familiar to you. To adjust the language 1. Choose a language from the Language list. 2. Click Apply. The MimioStudio dialog box appears. 3. Click Yes to restart MimioStudio in the selected language. 208 Adjusting MimioStudio Notebook Preferences Adjusting MimioStudio Notebook Preferences MimioStudio Notebook preferences provides options for setting the general parameters of MimioStudio and the default interaction mode with MimioClassroom devices. The following tables describe the MimioStudio Notebook preferences. General Preferences Setting Description Enable audio feedback Enables sound from a mimio device when buttons are pressed or the device is connected to or disconnected from the computer. Enable smooth ink, objects and text Enables smooth or anti-aliased ink, objects and text. Disabling this setting can increase the performance of the application. Enable auto recovery Enables the automatic recovery of data if MimioStudio quits unexpectedly. When this setting is enabled, MimioStudio Notebook saves ink data to a backup file every 10 minutes. Enable trashcan Places the trashcan on the MimioStudio Notebook as an easy method for deleting content. Enable fullscreen border (Screen Annotation only) Enables the border during Screen Annotation mode. See Marking Up the Display Using Screen Annotations. 209 Customizing MimioStudio Ink Capture Preferences Setting Description Connect to available device on file new Automatically connect devices to newly opened Notebook. Connect to device when any pen is used Automatically open a Notebook in Ink Capture mode when a MimioCapture or Mimio Capture Kit pen touches the whiteboard. Download data when local storage is detected (Mimio Interactive only) Automatically download digital ink to a new MimioStudio Notebook when a Mimio Interactive device is detected by your computer. Empty local storage after successful download (Mimio Interactive only) Create a new page when the 'Launch' button is Automatically empty digital ink from a Mimio Interactive device after the information is downloaded to a MimioStudio Notebook. Automatically add a new page to the MimioStudio Notebook each time the Launch button, , is pressed. pressed Adjusting the Proxy Server Preferences If you activated MimioStudio software using an activation code, the software must be able to validate the activation code with the licensing server at least once every 15 days. You can enable MimioStudio software to use a proxy server to validate the activation code. If you activated MimioStudio software by connecting a Mimio hardware device, no validation of an activation code is required. Proxy Server Preferences 210 Setting Description Enable Proxy Server Select this check box to enable MimioStudio to use a proxy server. IP Address Enter the IP address of the proxy server. Port Enter the port to use to access the proxy server. Username Enter the user name to use to access the proxy server. Password Enter the password for the proxy server. MimioStudioAdjusting MimioStudio Recorder Preferences MimioStudioAdjusting MimioStudio Recorder Preferences The MimioStudio Recorder preferences allow you to adjust the video and audio quality used for recording sessions. The following table describes the MimioStudio Recorder preferences. Setting Description Video Quality Choose the quality to use to record video. Audio Quality Choose the quality to use to record audio. Video Format Choose the format for recording a movie. Adjusting the Tablet Devices Preferences The Tablet Devices preferences display a list of all tablet devices that are connected to your computer. Adjusting the Mobile Settings The Mobile preferences displays the connection information for MimioMobile and the QR code used to connect the teacher mobile device to your computer. To connect the teacher mobile device 1. Start MimioStudio Preferences. 2. Select Mobile. 3. Tap on your mobile device to start MimioMobile. 4. Under Connection Methods, tap QR scan. 5. Tap the QR code image on the mobile device to launch the camera. 6. Align the guides on the device screen with the QR code in MimioStudio to scan the QR code. The device connects to your computer and the desktop is displayed on your mobile device. Adjusting the Vote Preferences The following table describes the MimioStudio Vote preferences. 211 Customizing MimioStudio 212 Setting Description Buttons Select to have each MimioVote unit button illuminated with a different colour or to have all the buttons illuminated with a single colour. Display student scores on handheld units Select this check box to have the student score displayed on each student's MimioVote unit once the student has completed a self-paced activity. Store screen snapshot with question Select this check box to save a screen shot with each question polled using MimioStudio Quick Vote. Chapter 16 Getting Help This chapter describes how to check for and install software updates and how to troubleshoot some common problems. If you are unable to solve a problem, this chapter also describes how to contact Mimio Technical Support. Updating the Software The Software Update preferences allow you to check for and install MimioStudio software updates. You must be connected to the Internet to check for updates. To check for software updates 1. Start MimioStudio Preferences. 2. Select Software Update. 3. Click Check for Updates. A list of available updates is displayed. To turn on automatic update notification Select the Notify me when updates are available check box and then click OK. To install software updates 1. Select the updates you want to install. 2. Click Install. Troubleshooting To test for environmental interference (Mimio Interactive only) 1. Start MimioStudio Preferences. 2. Select Ink Capture and then click Preferences. 3. Under Environmental Analysis, click Test. Contacting Mimio Mimio maintains an Internet website that offers support for MimioClassroom products. In addition, Mimio’s Technical Support department is available by phone. Website: www.mimio.com Phone: (877) 846-3721 Visit the Support section of our website at www.mimio.com to contact us by email. 213 This page intentionally left blank for double-sided printing. 214 Chapter 17 Technical and Environmental Information This chapter contains technical information for the MimioClassroom products. For product specifications and compliance information, visit the Documentation section of the Support area of our website at www.mimio.com. Environmental Information The equipment that you bought has required the extraction and use of natural resources for its production. It may contain substances hazardous to health or the environment. In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems. These systems will reuse or recycle most of the materials of your end life equipment in a sound way. The crossed-bin symbol marked in your device invites you to use those systems. If you need more information on the collection, reuse and recycling systems, please contact your local or regional waste administration. You can also contact Mimio for more information on the environmental performances of our products. Safety Precautions for Lithium-Ion Rechargeable Batteries Improper handling of a Lithium-ion rechargeable battery may cause leakage, heat, smoke, explosion or fire. This could result in deterioration of performance or failure. It may also damage the protection device installed in the battery pack, which could damage equipment or injure users. Adhere strictly to the instructions below. 215 Technical and Environmental Information While Charging Danger l When charging the battery, use dedicated chargers and follow the specified conditions. l Do not connect directly to an electric outlet or cigarette lighter charger. l Do not use or store battery close to fire or inside a car where temperatures may exceed 60°C. Warning l Stop charging the battery if charging is not completed within the specified time. Caution l Read this user guide thoroughly before charging the battery. l Do not charge in a place that generates static electricity. l Battery can only be charged within 0°C~45°C temperature range. When Discharging the Battery Danger l Use the battery only in the specified equipment. l Do not use or store battery close to fire or inside a car where temperatures may exceed 60°C. Caution l Do not charge in a place that generates static electricity. l Battery can only be used within -20°C~60°C temperature range. Documentation Feedback We continuously strive to produce the highest quality documentation for our products. We welcome your feedback. Send us your comments or suggestions about our online Help, printed or PDF manuals. Please include the following information with your feedback: n Product name and version number n Type of document: printed manual, PDF, or online Help n Topic title (for online Help) or page number (for printed or PDF manuals) n Brief description of content (for example, step-by-step instructions that are inaccurate, information that requires clarification, areas where more detail is needed and so on) n Suggestions for how to correct or improve the documentation We also welcome your suggestions for additional topics you would like to see covered in the documentation. Send email feedback to: [email protected] 216 Documentation Feedback Please keep in mind that this email address is only for documentation feedback. If you have a technical question, please contact Customer Service. 217 This page intentionally left blank for double-sided printing. 218