Transcript
TC16
MINI EXCAVATOR
Specifications
Features
Operating weight
3,800 lbs (1,725 kg)
Short-tail machine
Engine power
18 HP (13.1 kW)
Extra-wide blade for dozer applications
Bucket capacity
0.74-3.2 ft3 (21-91 l)
Top-mounted boom cylinders for perfect protection of cylin-
Dig depth
7' 3" (2.2 m)
ders and larger range of application
Reach
12' 10" (3.9 m)
Comfort cab with perfect all-round visibility Knickmatik® allows for working closely alongside walls Wide range of proven working tools
SPECIFICATIONS OPERATING DATA, STANDARD EQUIPMENT 3,635 lbs (1,650 kg) 3,800 lbs (1,725 kg) 8' 2" (2,500 mm). 12' 6" / 12' 2"* 3,800 (3,720* mm) 7' 10" (2,390 mm). 3' 3" (990 mm) 3' 8" (1,130 mm) 4' 1" (1,240 mm) 7' 9"/ 8' 2" (2,370 / 2,500 mm) 6.7" (170 mm) 3,237 lbf (14,400 N) 2,091 (1,866* lbf) / 9,300 (8,300* N) 3.6 psi (0.25 daN/cm2) 3.7 psi (0.26 daN/cm2)
ENGINE Manufacturer, model Type Combustion Displacement Net power rating at 2,200 rpm (SAE J 1349) Max. torque Cooling system
Mitsubishi, L3E 3-cylinder diesel engine, EPA/Tier 4 Final (2008) 4-stroke, swirl chamber injection 58 in3 (952 cm3) 18 hp (13.1 kW) 40.6 lbf ft (55 Nm) @ 2,100 rpm Water
ELECTRICAL SYSTEM Nominal voltage Battery Generator Starter
12 V 12 V / 74 Ah 12 V / 40 A 12 V / (2.3 hp) 1.7 kW
TRANSMISSION Single-stage hydrostatic travel drive with axial piston variable displacement motor and reduction gear, fully enclosed. “Straight-Travel” function. Brake valve for downhill drive. Travel speed, forward and reverse 1.5 mph (0-2.4 kph) Gradeability max. 60 % Drawbar pull 2,610 lbf (1,160 daN)
UNDERCARRIAGE Maintenance-free crawler-type undercarriage. Idler suspension with hydraulic crawler track tensioning. Mechanically retractable/extendable undercarriage provided as standard. Range of adjustment, outside edge of crawler chains 3' 3-4' 5" (990-1,340 mm) Width rubber crawlers / steel crawlers 9" (230 mm) Total length (sprocket - idler) 44.5" (1,130 mm) Total length (undercarriage) 58.7" (1,490 mm)
DOZER BLADE Independent of drive train, sensitive control via separate hand lever. Width x height Dozer cut below ground Dozer lift above ground Slope angle
4' 5" x 9" (1,340 x 235) mm 6.3" (160 mm) 8" (200 mm) 25°
STEERING Independent, individual control of crawler chains, also counterwise. Sensitive control via hand levers combined with foot pedals. Pedal console serving as foot rest.
SWING SYSTEM Hydrostatic drive, also acts as wear-restistant brake. Additional spring-loaded multi-disc brake. Internally toothed ring gear. Swing speed 0-10 rpm
KNICKMATIK® Lateral parallel adjustment of boom arrangement at full digging depth. Angle of articulation / lateral adjustment left Angle of articulation / lateral adjustment right
60° / 15" (370 mm) 60° / 20" (510 mm)
FLUID CAPACITIES Fuel tank Hydraulic system (incl. tank 6.6 gal (25 l))
8 gal (30 l) 9 gal (35 l)
HYDRAULIC SYSTEM Pump capacity 8.3 + 4.7 gpm (31.5 + 18 l/min) Working pressure 2,395 psi (165 bar) Working hydraulics: Dual fixed displacement pump with power switch. Load-independent flow division (LUDV) for all work functions and travel drive. Simultaneous independent control of all movements. Tank-immersed return filter with electric contamination indicator, full flow filtration. Hydraulic oil radiator provided as standard. Boom, dipperstick and articulated cylinders with end-positioning damping on both sides, bucket retract function with one-side end-position damping. Open return provided as standard. All functions can be activated proportionally. Two servo-assisted joystick controls for excavator operations. Shut-off of all functions when operator dismounts from machine. Control circuit for work attachments (standard): Diagram shows P/Q provided on couplers 40 30
Quantity (Q) l/min
Transport weight (incl. bucket) Operating weight acc. to ISO 6016 (incl. operator) Total length (travel position) Total length (trailer transport position) Total height (travel position) Width (crawlers retracted) Uppercarriage tailswing Uppercarriage frontswing Working envelope 180° / 360° Ground Clearance Bucket digging force (ISO 6015) Stick digging force (ISO 6015) Ground pressure (rubber crawlers) Ground pressure (steel crawlers)
20 10 0
0
20
40
60
80
100
120
140
160
180
Pressure (P) bar
CAB Spacious, sound-insulated full-vision steel cab, FOPS** (acc. to ISO 3449) and TOPS (acc. to ISO 12117) certified. Two equally large doors. Safety glass windows, thermo windows tinted in green. Skylight thermo window, bronze tinted. Panoramic rear window. Front window supported by pneumatic springs, lockable for ventilation and slidable under cab roof. Windshield washer system. Storage compartment. Preparation for radio installation. Left-hand outside rear-view mirror. Cab heating with windshield defroster through coolant heat exchanger and 2-speed fan, ventilating mode in summer. Fabric-covered operator's seat FSP010 with lap belt. Instrument panel on the right hand side of the operator's seat with visual & acoustic warning device, hour-meter, instrument cluster with large fuel gauge. Working flood lights Halogen H-3. 93 dB (A) Noise emission ambience LWA 78 dB (A) Noise emission cab LpA Measured in dynamic measuring cycle acc. to EC-directive 2000/14/EC. *with dipperstick 1300 mm (optional) **FOPS-approved only with skylight guard (optional)
7' 10" (2,390)
7' 7" (2,300) 3' 6" (1,060)
7' 6" (2,290)
8' 0" (2,430)
5' 6" (1,670)
4' 0" (1,220)
9' 9" (2,960)
9' 3" (2,830)
6' 2" (1,870)
11' 4" (3,460)
11' 0" (3,350)
8' 11" (2,710)
7' 3" (2,200)
5' 7" (1,700)
9' 7" (2,910)
7' 10" (2,400)
6' 4" (1,920)
5' 11" (1,820)
9' 7" (2,930)
6' 8" (2,040)
TC16
25°
10' 3" (3,130)
WORKING RANGES & DIMENSIONS: MONOBLOC BOOM
12' 8" (3,860)
12' 9" (3,900)
13' 3" (4,050)
13' 5" (4,085)
Dipperstick 3' 7" (1,100 mm) Dipperstick 4' 3" (1,300 mm)
LIFTING CAPACITIES Bucket hinge height Dipperstick 3' 7" (1,100 mm)
6' 7" (2.0 m) 3' 3" (1.0 m) 0m -2' 6" (-0.75 m)
S T S T S T S T
Bucket hinge height Dipperstick 4' 3" (1,300 mm)
6' 7" (2.0 m)
S
3' 3" (1.0 m)
S
0m
S
-2' 6" (-0.75 m)
S
T
T
T
T
4' 11" (1.5 m) UE UR End Side End Side 1.96 (0.89) 1.74 (0.79) 1.96 (0.89) 1.52 (0.69) 1.2 (0.54) 1.7 (0.77) 1.2 (0.54) 1.32 (0.60) 2.03 (0.92) 1.56 (0.71) 2.03 (0.92) 1.08 (0.49) 1.3 (0.59) 1.52 (0.69) 1.3 (0.59) .90 (0.41) 1.41 (0.64) 1.34 (0.61) 1.41 (0.64) .93 (0.42) 1.1 (0.50) 1.34 (0.61) 1.1 (0.50) .82 (0.37)
Load radius from center of ring gear 6' 7" (2.0 m) 8" 2" (2.5 m) UE UR UE UR End Side End Side End Side End Side 1.23 (0.56) 1.04 (0.47) 1.23 (0.56) .82 (0.37) 1.19 (0.54) .84 (0.38) 1.19 (0.54) .64 (0.29) .84 (0.38) 1.01 (0.46) .84 (0.38) .70 (0.32) .75 (0.34) .82 (0.37) .75 (0.34) .53 (0.24) 1.54 (0.70) 1.1 (0.50) 1.54 (0.70) .86 (0.39) 1.23 (0.56) .82 (0.37) 1.23 (0.56) .60 (0.27) .84 (0.38) 1.08 (0.49) .84 (0.38) .70 (0.32) .62 (0.28) .79 (0.36) .62 (0.28) .51 (0.23) 1.41 (0.64) 1.04 (0.47) 1.41 (0.64) .73 (0.33) .97 (0.44) .77 (0.35) .97 (0.44) .55 (0.25) .75 (0.34) 1.01 (0.46) .75 (0.34) .62 (0.28) .51 (0.23) .75 (0.34) .51 (0.23) .46 (0.21) 1.01 (0.46) 1.01 (0.46) 1.01 (0.46) .68 (0.31) .73 (0.33) .73 (0.33) .73 (0.33) .53 (0.24) .64 (0.29) 1.01 (0.46) .64 (0.29) ) .60 (0.27) .51 (0.23) .73 (0.33) .51 (0.23) .44 (0.20)
9' 10" (3.0 m) UE UR End Side End Side .77 (0.35) .71 (0.32) .77 (0.35) .46 (0.21) .42 (0.19) .66 (0.30) .42 (0.19) .42 (0.19) .68 (0.31) .68 (0.31) .68 (0.31) .44 (0.20) .40 (0.18) .64 (0.29) .40 (0.18) .40 (0.18) .49 (0.22) .66 (0.30) .49 (0.22) .42 (0.19) .42 (0.17) .62 (0.28) .42 (0.17) .42 (0.17)
4' 11" (1.5 m) UE UR End Side End Side 2.18 (0.99) 1.72 (0.78) 2.18 (0.99) 1.17 (0.53) 1.28 (0.58) 1.65 (0.75) 1.28 (0.58) .99 (0.45) 1.5 (0.68) 1.7 (0.77) 1.5 (0.68) 1.1 (0.50) 1.1 (0.50) 1.63 (0.74) 1.1 (0.50) 1.03 (0.47)
Load radius from center of ring gear 6' 7" (2.0 m) 8" 2" (2.5 m) UE UR UE UR End Side End Side End Side End Side .99 (0.45) 1.01 (0.46) .99 (0.45) .64 (0.29) .66(0.30) .99 (0.45) .66(0.30) .60 (0.27) 1.41 (0.64) 1.34 (0.61) 1.41 (0.64) .97 (0.44) .88 (0.40) .86 (0.39) .88 (0.40) .62 (0.28) .88 (0.40) 1.34 (0.61) .88 (0.40) .79 (0.36) .62 (0.28) .86 (0.39) .62 (0.28) .57 (0.26) 1.34 (0.61) 1.17 (0.53) 1.34 (0.61) .79 (0.36) .97 (0.44) .82(0.37) .97 (0.44) .60 (0.27) .79 (0.36) 1.1 (0.50) .79 (0.36) .71 (0.32) .57 (0.26) .82(0.37) .57 (0.26) .53 (0.24) 1.08 (0.49) 1.12 (0.51) 1.08 (0.49) .75 (0.34) .77 (0.35 .82(0.37) .77 (0.35 .55 (0.25) .77 (0.35) 1.12 (0.51) .77 (0.35) .66 (0.30) .64 (0.29) .82(0.37) .64 (0.29) .51 (0.23)
9' 10" (3.0 m) UE UR End Side End Side .77 (0.35) .71 (0.32) .77 (0.35) .49 (0.22) .46 (0.21) .66 (0.30) .46 (0.21) .46 (0.21) .77 (0.35) .71 (0.32) .77 (0.35) .46 (0.21) .51 (0.23) .66 (0.30) .51 (0.23) .42 (0.19) .71 (0.32) .69 (0.31) .71 (0.32) .44 (0.20) .46 (0.21) .64 (0.29) .46 (0.21) .40 (0.18) .55 (0.25) .66 (0.30) .55 (0.25) .42 (0.19) .44 (0.20) .62 (0.28) .44 (0.20) .37 (0.17)
The above loads (all values in lbs x 1,000 resp. metric tons) are in compliance with SAE J 1097. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. All values were determined with quick-attach system but without bucket. In case of mounted-on work attachments, the deadweights of the work attachments must be deducted from the permissible payloads. Working equipment: Rubber crawlers. Abbreviations: UE = Undercarriage extended, UR = Undercarriage retracted, S = Supported by blade, T = Traveling
Max. height loading position
60° 4' 5" (1,340) 7' 9" (2,370) 8' 2" (2,500) Bucket heaped
15" 370 20" 510
Work equipment: Monobloc boom with dipperstick 1100 mm
60°
DIMENSIONS
WORK ATTACHMENTS BUCKETS
GRABS 10" (250 mm wide, capacity .85 ft3 (24 l) 9" (220 mm wide, capacity .74 ft3 (21 l) 12" (300 mm wide, capacity 1.06 ft3 (30 l) 12” (300 mm wide, capacity 1.03 ft3 (29 l) 16" (400 mm wide, capacity 1.55 ft3 (44 l) 16" (400 mm wide, capacity 1.41 ft3 (40 l) 20" (500 mm wide, capacity 1.94 ft3 (55 l) 24" (600 mm wide, capacity 2.5 ft3 (71 l) 24” (600 mm wide, capacity 2.15 ft3 (61 l) 39" (1,000 mm wide, capacity 3.21 ft3 (91 l) 47" (1,000 mm wide, capacity 3.0 ft3 (85 l) 39" (850 mm wide, capacity 2.15 ft3 (61 l) 39" (1,000 mm wide, capacity 1.98 ft3 (56 l)
Bucket, QAS Bucket, directly mounted Bucket, QAS Bucket, directly mounted Bucket, QAS Bucket, directly mounted Bucket, QAS Bucket, QAS Bucket, directly mounted Ditch-cleaning bucket, QAS Ditch-cleaning bucket, directly mounted Swing bucket, QAS Swing bucket, directly mounted
Clamshell grab GL 1250, grab swing brake Ejector
set of shells 10" (250 mm) wide, capacity 1.77 ft3 (45 l)
OTHER WORK ATTACHMENTS Hydraulic hammer Auger Bolt-on load hook for bucket rod
Cutting unit Quick-change adapter for hydraulic hammer Further work attachments available on request
OPTIONAL EQUIPMENT BOOM OPTIONS
CAB
Monobloc boom, with extended dipperstick 51" (1,300 mm)
CRAWLER CHAIN OPTIONS Steel crawler chain, 9" (230 mm) wide
HYDRAULIC SYSTEM Terex 'Fingertip' control (electro proportional) for additional control circuit for work attachments on right joystick, actuation via rollers Hose-rupture / load-retaining valve for boom with load warning device Hose-rupture / load-retaining valve for dipperstick
Terex 'Fingertip' control (electro proportional) incl. second additional control circuit on left joystick, actuation via rollers Second additional control circuit (e.g. for sorting grab), foot pedal Biodegradable hydraulic oil / ester-based HLP 68 (Panolin)
Float position - front dozer blade
DRIVER’S STAND Fabric-covered operator's seat MSG 20 (standard version), lap belt, adjustable driver's weight
Rain guard Cab-mounted working floodlight, front right Boom-mounted working floodlight Anti-theft device, coded key (immobilizer) Yellow beacon
FOPS - skylight guard Cab-mounted working floodlight, rear right Radio set installation kit (speakers) Electronic immobilizer, keypad operation Motion alarm incl. horn (to be deactivated on demand)
OTHER OPTIONAL EQUIPMENT Mechanical quick-attach system (QAS) Quick-attach system, mechanical (genuine Lehnhoff system), type MS01 Crane lifting beam Track shoes with “Felasto” tiles Additional boom-mounted working floodlight Rear vandal guard
High-speed 0-4.5 kph Canopy with working floodlight (weight reduction: 176 lbs (80 kg)) Electrical refueling pump Special coating / adhesive films Front dozer blade - extra-long version Further optional equipment available on request
www.terex.com Effective Date: February 2011. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2012 Terex Corporation. (R1_111012) TC16 2.5K 0211C Part No. 109282 Terex Construction 8800 Rostin Road, Southaven, MS 38671 USA Tel +1 (888) 90-TEREX www.terex.com
