Mini Hi-fi System With Turntable

Transcript

Mini Hi-Fi System with Turntable Model Number: AMHST-014 INSTRUCTION MANUAL www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 Welcome Congratulations on choosing to buy a BAUHN® product. All products brought to you by BAUHN® are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty. We hope you will enjoy using your purchase for many years to come. www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 i Remote Control 28 29 1 14 2 15 3 4 16 17 5 18 6 19 8 21 22 7 20 23 24 9 25 10 11 26 12 13 ii 27 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 POWER NUMERIC Buttons FAST FORWARD REVERSE STEREO/MONO RECORD REPEAT PREVIOUS PROGRAM PHONO TAPE TUNER ID3 MUTE TIMER TU.-DOWN TU.-UP RECORD / PLAY/PAUSE EQUALIZER NEXT EJECT STOP CLOCK CD VOL UP/DOWN USB/SD 0/10 10+ www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 Remote Control (Cont.) Using the remote control • Place two AAA size batteries (supplied) in the remote control’s battery compartment, making sure to match the polarity markings inside the compartment. • When using the remote control, aim it at the remote control sensor at the front of the unit. Make sure there are no large obstacles between the remote control and the main unit. • Do not drop the remote control unit; do not subject it to physical shocks. • Bright sunlight or lightning may cause erratic operation. • Use of the unit near fluorescent lighting may cause interference when using the remote control. If the unit is displaying erratic behaviour, move it away from any fluorescent lighting. • Keep the remote control dry. Wetting it may cause malfunction. • Replace the batteries when remote control operation deteriorates. Battery precautions Always follow the precautions below when using batteries: CAUTION: Danger of explosion! Ensure to insert batteries according to the polarity markings. • Clean the battery contacts and those of the device prior to installation. • Replace all batteries at the same time with fresh batteries of the same size and type. • Do not mix old and new batteries, different types of battery (alkaline, carbon-zinc or rechargeable), or rechargeable batteries of different capacities. Mixing different types of battery could cause leakage or rupture. • Remove the batteries when the unit is not in use for a long time to avoid leakage. Batteries can leak chemicals that can damage electronic parts. • Dispose of batteries promptly and properly, observing any local hazardous waste regulations. Do not burn or bury them. • Note that there are chargeable and nonchargeable batteries. Do not attempt to charge nonchargeable batteries. • Keep batteries away from children. If you suspect a battery may have been swallowed, seek immediate medical assistance. iii www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 Mini Hi-Fi System with Turntable Warranty Details The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion, solely at our option with no charge for parts and labour. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 1 Contents 2 Welcome i Remote Control ii Warranty Details 1 General Safety Instructions 3 Product Overview 6 Getting Started 8 Instructions 11 Other Useful Information 18 Repair and Refurbished Goods or Parts Notice 19 www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 General Safety Instructions Read this manual thoroughly before first use and keep it in a safe place for future reference, along with the warranty card, purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Follow all instructions and take notice of all warnings to reduce the risk of fire or electric shock. Danger! Caution! This symbol alerts you that there is dangerous voltage inside. To prevent electric shock, do not open the enclosure. Important! This symbol alerts you to read and observe important warnings and instructions on the unit or in this manual. CLASS 1 LASER PRODUCT This label on the rear of the unit indicates that this product uses only weak laser and that there is no hazardous radiation outside the unit. Electrical safety and cord handling • Protect from moisture: Do not expose this equipment, the power supply cord and plug to rain or moisture; do not use it anywhere near water or where water splashes or drips; do not touch the power plug with wet hands. • Do not open: To prevent contact with high voltage components inside, do not attempt to open the equipment. Do not repair the unit yourself; there are no user-serviceable parts inside. Only have it serviced by qualified personnel. • Plug replacement: When replacing the unit’s power plug or cord, the replacement must be exactly the same or one recommended by the manufacturer. Do not replace the plug or cord yourself. • Voltage: Before installing this equipment, make sure your outlet voltage corresponds to the voltage stated on the appliance rating label. • Cord and plug: Only use this equipment with the cord and plug supplied. Align the plug properly and insert it fully. Do not overload the power outlet. • Damaged cord: When the power cord is damaged, it must be replaced by the manufacturer or similarly qualified personnel in order to avoid a hazard. • Protect the power cord: Do not let the cord hang over the edge of a table or counter, or touch any hot surface. Do not allow anything to rest on or roll over the power cord. Run any cords so no one steps on or trips over them. Do not run the cord near heat-producing appliances such as radiators or stoves. www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 3 General Safety Instructions (Cont.) • Power socket: This equipment can only be disconnected from the power supply by unplugging it from the mains socket. Make sure the mains socket is readily accessible at all times. • Disconnect: Unplug the unit when it is not going to be used for a while. This will prevent damage to the product due to lightning and powerline surges. Grasp the plug, not the cord, when disconnecting. Usage conditions and restrictions • Installation: When installing the unit, make sure to place it: • In a well ventilated area. Do not build it into a frame. • Away from heat sources, radiators or other products that produce heat. • Away from areas with high temperatures, high humidity or direct sunlight. • Away from excess dirt and dust. • Away from open windows and any place where water or metal objects may get into the unit and damage it. • Instructions: Follow the instructions in this manual when installing and adjusting this equipment. Improper use or installation may result in the risk of fire, electric shock and/or injury. • Adjustments: Only adjust those controls that are covered in this manual, as improper adjustment of other controls may result in damage. If this happens, unplug the equipment and have it professionally serviced. • Attachments: Do not use any attachments that are not recommended by the product manufacturer. • Usage restriction: The equipment is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the equipment by a person responsible for their safety. • Children: Young children should be supervised to ensure they do not play with the equipment. Close supervision is always necessary when electric or electronic equipment is used by or near children. • Location: Place the product on a straight, rigid and stable surface. • Ventilation: Openings on the cabinet are provided for ventilation and to protect the unit from overheating. To ensure proper operation: • Do not cover openings with things such as newspapers, tablecloths, curtains etc. • Do not place the unit on a bed, sofa, carpet, rug or similar surface that may block the ventilation openings. 4 www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 General Safety Instructions (Cont.) • Clearance: Allow at least 10cm spacing at the back and top of the product, and 5cm on both sides, to prevent overheating. • Protect the equipment: Prevent metal objects falling into the equipment. Do not place heavy objects on top of the equipment or step on it. Do not place objects filled with water, or naked flame sources, on top of the unit. • Cleaning: Unplug the unit from the power outlet before cleaning. Clean the unit only with a dry, clean cloth. Do not use liquid or aerosol cleaners or volatile solvents. Do not use insecticides near the equipment. • Service/Repair: If the unit has been damaged, have it serviced or repaired by qualified personnel only. Contact our after sales support line for advice. • Liability: We accept no liability for any damage or lost data caused by noncompliance with these instructions or mishandling of the equipment. • Interference: Since movement of the CD mechanism and the sensitive circuitry may cause interference to nearby radio equipment we recommend you switch this unit off while operating other radio devices. • Failure to operate: If the unit fails to operate properly, it may not be a malfunction but due to the complexity of the internal software. In such a case, unplug the unit from the mains power supply and wait a few minutes before reconnecting it. www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 5 Product Overview 29 Front panel 1 30 2 4 3 5 6 8 27 25 7 23 9 10 11 12 13 14 21 19 17 28 26 33 32 24 22 20 18 15 16 1 2 3 4 5 6 7 8 9 6 Dust Cover Disc Tray LCD Display Power Switch Play/Pause Button Stop Button Next Button Random Button Previous Button 10 11 12 13 14 15 16 17 18 Repeat Button Headphone Jack Microphone Jack Tape Normal/High Mode Button TU. Cassette Doors Cassette Function Buttons Volume +/- Adjustment Knob FM ST/Mono Button www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 31 Product Overview(Cont.) Rear panel 34 35 36 19 20 21 22 23 24 25 26 27 USB Port TU. EQ Button SD Card Slot Open/Close Button USB/SD Mode Button Function Button Clock Button Sleep Button 28 29 30 31 32 33 34 35 36 Program Button Spindle Adaptor Lift Lever Auto Stop Switch 33/45 RPM Speed Selector Arm Holder/Lock FM Antenna Speaker Terminal AC Cord Input www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 7 Getting Started Installation • Unpack the product and remove protective material. Keep all packaging materials until you have made sure your new Hi-Fi System is undamaged and in good working order. Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all packaging materials are out of their reach. • Inspect the cord and plug for damage. Do not use the product if the cord or plug have been damaged or are not working properly. • Do not cover any vents and make sure to keep a space of several centimetres around the unit for ventilation. • Connect the speaker wire connector to the speaker terminal at the back of the unit. Make sure to connect the red wire to the [ + ] terminal and the red/black wire to the [ - ] terminal. • Do not connect the unit to the mains power supply until you have made sure that your outlet voltage and circuit frequency correspond to the voltage stated on the product rating label and before all connections have been made. Switching On • Connect the power cord to a properly earthed AC outlet. • Press the POWER switch to turn on the unit: the LCD display and power indicator will illuminate, indicating that power is supplied to the unit. • In power on state, press the POWER switch to turn the unit off. Clock Setting • Switch on the unit as described above, then use the remote control to set the clock. It can be set to a 12 or 24-hour cycle. • Press and hold the CLOCK button: the display will show 12 or 24 hr. • Use the / buttons to select the desired clock cycle, then press the CLOCK button again to confirm. • Press and hold the CLOCK button until the hour digits start flashing. Then use the / buttons to set the correct hour. • Press and hold the CLOCK button again until the minute digits start flashing. Then use the / buttons to set the correct minute. • After a few seconds, the clock will display the current time. 8 www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 Getting Started (Cont.) Timer Setting Use this timer setting to turn on and off at your set time with the sounds of your favourite CD or radio program. • Press the TIMER button to enter Timer Program mode: the LCD will show "TR-ON" and the hour value of the clock will start flashing. • Use the / buttons to set the desired hour you want the unit to turn on. • Press the TIMER button again: the minute value of the clock will start flashing. • Use the / buttons to set the desired minute for the timer to come on. • Press the TIMER button again until "TR-OFF" is displayed on the LCD and the hour value of the clock is flashing. • Use the / buttons to set the desired hour you want the unit to turn off. • Press the TIMER button again: the minute value of the clock will start flashing. • Use the / buttons to set desired minute for the unit to turn off. • Press the TIMER button again to set the timer-on input source. • Use the / buttons to select the input source. • Press the TIMER button again to set the timer-on volume level. • Use the / buttons to select the desired volume level. • Press the TIMER button again to confirm all the settings. Sleep Setting Use this sleep setting to preset a time (from 10 to 90 minutes) after which the system goes into standby mode. • Press the SLEEP button: the LCD will show the minutes remaining. • Press the SLEEP button again to set the desired time period after which you want the unit to to turn off. You can set the sleep time in 10-minute steps up to 90 minutes. • When the countdown has started, "SLEEP" will show on the LCD. • Press the SLEEP button again to cancel the sleep setting. www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 9 Getting Started (Cont.) Volume Control You can adjust the sound level with the remote control or directly on the unit. • On the remote control, press the VOL+ button to increase the volume, press the VOL- button to decrease the volume. • On the main unit, rotate the VOLUME knob to adjust the sound level. CAUTION: E  xposure to music at loud volume can permanently damage your hearing. Make sure to adjust the volume level appropriately to prevent potential hearing damage. Muting the sound • Press the MUTE button to mute the sound temporarily. • Press the MUTE button again, or rotate the VOLUME knob, to restore the sound to the previously set level. Preset Equaliser This unit provides four different sound modes to enhance your listening experience. Press the EQ button to select from the following options: • ROCK: Bass sounds are emphasised with some stress on the treble range. • JAZZ: Bass and middle range (voice) sounds are emphasised. • CLASSIC: Voice and middle range sounds are emphasised, with some emphasis on bass sounds. • FLAT: The bass, middle and treble levels have equal emphasis. Headphone Jack • For private listening, insert a stereo headphone with a plug diameter of 3.5mm into the headphone jack at the front of the main unit. Upon connection, sound output to the speakers will be disconnected automatically. • Use the above methods to adjust the volume level of the headphone. 10 www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 Instructions Radio Operation • Press the FUNCTION button on the front panel repeatedly, or the TUNER button on the remote control, to select TUNER mode. • Use the TU. / TU. buttons to tune into the desired station. • Adjust the volume and preset equaliser (refer to page 10) to suit your personal listening preference. Presetting radio stations You can store up to a total of 30 FM radio stations in the memory. • Press the FUNCTION button on the front panel repeatedly, or the TUNER button on the remote control, to select TUNER mode. • Press and hold the TU. / TU. button until you have found the desired station. • Press the PROG button, then use the / buttons to select the desired memory preset number, then press the PROG button again to save the radio station to the memory preset. • Repeat the above two steps until you have saved all desired radio stations to a memory preset. You can overwrite a preset station by storing another frequency in its place. Listening to a preset station • Press the FUNCTION button on the front panel repeatedly, or the TUNER button on the remote control, to select TUNER mode. • Use the numeric or / buttons to navigate through stored presets. Antenna adjustment • Unravel the FM antenna wire at the back of the main unit and extend it to its full length for best reception. www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 11 Instructions (Cont.) Cassette Tape Operation • Press the FUNCTION button on the front panel repeatedly, or the TAPE button on the remote control, to select TAPE mode. • Adjust the volume and preset equaliser (refer to page 10) to suit your personal listening preference. • Use the cassette function buttons for playback control in TAPE mode. For basic tape playback, proceed as follows: • Open the cover below the tape decks. • Depress the button to open the tape compartment. • Gently tighten the tape, as loose tapes can cause trouble. • Insert the cassette with the tape facing downwards. • Shut the tape compartment until it locks audibly. • Depress the button, until it locks, to play the tape. • Press the button to interrupt playback. • Press the button to stop playback. • Press the key again to open the tape compartment. Auto-stop function When the tape has reached the end, the tape deck will switch off automatically. Extended play To play two tapes in succession, load a cassette tape in each tape deck. • Press the button for each tape deck, then press the button for Deck A. • The tape in Deck B will be played first. At the end, the tape will stop and the tape in Deck A will start playing automatically. Recording to tape When recording observe copyright law. If in doubt consult a lawyer. Use the following cassette function buttons for recording. Recording Play Rewind Fast Forward Stop, Open NOTE: Y  ou cannot record on Chromium (IEC II) or Metal (IEC IV) tapes. Only use NORMAL Ferro Tapes (IECI) for recording. 12 www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 Instructions (Cont.) Recording controls As source for recording you can use the radio, a CD, MP3 file, a recording stored on a USB flash drive, the microphone or another cassette tape. • Insert the tape you want to record on into Deck A. • Press the button. • Press the button, the button will automatically go down. • Press the FUNCTION button and choose the required source. • To start recording press the button again. • To interrupt or stop recording press either the or the button. NOTE: Y  ou cannot influence the recording with the volume control or equaliser setting. High-speed dubbing from Deck B to Deck A This unit is equipped with a high speed dubbing system which can save you time when dubbing from one cassette tape to another. Dubbing is performed only one way from Deck B (playback) to Deck A (recording). • Press the TAPE NORMAL/HIGH button on the main unit. • Put the source tape into Deck B and the target tape into Deck A. • Press the button for both decks. • Press the button for Deck A, then the button for Deck B. • To start dubbing press the buttons on both decks again. • To stop dubbing press the STOP button for both decks. Tape protection • To protect your tapes against unwanted erasure or overwriting, remove the tab in the top of the cassette. You can cover the hole later with tape, if you decide to overwrite it anyway. • Keep tapes away from magnets and electromagnetic fields, such as transformers, loudspeakers, TV sets. • Keep tapes in a box to protect from dust and humidity. • Do not keep tapes where they are exposed to extreme cold and hot temperatures, as plastic parts can break or melt in such conditions. • Note that tapes with long play time (90min, 120min) are thinner. They might stick to the rubber pressure roller or break easily. www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 13 Instructions (Cont.) Recording from CD/USB/SD • Press the FUNCTION button on the front panel repeatedly and choose the appropriate mode you want to record from (DISC or USB/SD). • Insert a blank cassette tape suitable for recording in Deck A. • Press the PAUSE button first and then the RECORD and PLAY button at the cassette deck. The recording function is now on standby. • Start playback of your CD or USB/SD source, then press the PAUSE button at the cassette deck to start recording. • To stop recording, press the STOP button for the source mode first, then press the PAUSE and the STOP/EJECT button at the deck. Recording from turntable • Press the FUNCTION button on the front panel repeatedly, or the PHONO button on the remote control, to select PHONO mode. • Insert a blank cassette tape suitable for recording in Deck A. • Press the RECORD and PLAY button to start recording. • Select the desired record and start playback. • Press the PAUSE and then the STOP/EJECT button at the cassette deck when finished. CD Player Operation • Press the FUNCTION button on the front panel repeatedly, or the CD button on the remote control, to select DISC mode. • Press the OPEN/CLOSE button to open the CD tray, place a CD on the tray and close the CD door. • Adjust the volume and preset equaliser (refer to page 10) to suit your personal listening preference. • Use the CD/MP3 function buttons for playback control in DISC mode. For basic CD playback, proceed as follows: • PLAY/PAUSE - Press this button to start playing a CD. Pressing this button during playback will stop playback temporarily; to restart, press this button once again. • STOP - Press this button to stop CD playback. • SKIP/SEARCH - Press this button to skip to the next track. • - Press this button to quickly advance through the track. 14 www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 Instructions (Cont.) • - Press this button to skip to the start of the track currently played. Press it again to go to the previous track. • - Press this button to quickly rewind. • REPEAT - Press this button to select or cancel repeat play mode. • PROGRAM - Use this button when storing track numbers to be played into the memory. Maximum capacity is 20. Programming tracks for playback • Select DISC mode (as previously described). • Place a disc in the CD tray, then close the CD tray. • Press the STOP button to stop automatic playback. • Press the PROG button on the remote control to start the program memory. The "PROG" indicator will illuminate. • To input the desired track number, use the / or numeric buttons and then press the PROG button again to save and program the next track. • Once you have finished programming, press the PLAY/PAUSE button to start the programmed playback. • To erase your program, press the STOP button while playing the program. (The "PROG" indicator should be off when the program is cancelled, if it is still illuminated, press the PROG button to cancel the program.) Repeat modes • Press the REPEAT button on the remote control to select a repeat mode. The “REP” indicator will start flashing and the current track will be played over and over until cancelled. • To repeat all tracks on the disc, press the REPEAT button again; the “REP” indicator will be steady and all tracks on the disc will be played repeatedly until cancelled. • To stop repeat mode, press the REPEAT button again; the “REP” indicator will go off and the unit will resume normal playback mode. CD protection • To keep discs clean, always handle a disc by its edge. Do not touch the disc surface. • Do not stick paper or write anything on the surface. • After playing, store the disc in its case. www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 15 Instructions (Cont.) Turntable (Phono) Operation Important! Before using the turntable: • Make sure to remove the stylus protector, as illustrated on the right. It should easily slide off the stylus assembly. • Make sure to detach the tone arm from the tone arm rest before use and secure it again afterwards. • Press the FUNCTION button on the front panel repeatedly, or the PHONO button on the remote control, to select PHONO mode. • Set the RPM SPEED selector to the appropriate position (33 or 45), depending on the type of record to be played. • Place the record on the platter (use the spindle adaptor, if required). • Lift the tone arm off the rest and slowly move it to the record side, as illustrated on the right. The platter will start rotating. • Carefully place the tone arm to the desired position on the record. • Press the VOLUME UP/DOWN button to adjust to   your desired volume level. • At the end of the record, the platter will automatically stop rotating. Lift the tone arm from the record and return it to the rest position. • To stop playback before the end of the record, lift the tone arm from the record and return it to the rest. NOTE: S  ome records may stop playback before the end of the last track. If this happens, set the AUTO STOP switch to the “Off” position so the record will play to the end. However, with the switch in this position the record will not stop automatically. To stop the turntable rotating, press the POWER ON/STANDBY button to switch off the unit or switch the AUTO STOP button back to “On”. Then return the tone arm to the rest position. 16 www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 Instructions (Cont.) Digital Media Operation The system is able to play back MP3 or WMA files stored in the memory media connected to the USB port or SD card slot at the front of the main unit. • Press the FUNCTION button on the front panel repeatedly, or the USB/SD button on the remote control, to select USB or SD mode. • Following the illustration on the right, insert your storage media. • Make sure the USB flash drive is fully inserted into the USB port. • Make sure the SD card is inserted straight, without bending. (Connecting the card upside down or backwards could damage the system or the card. Check to ensure the direction is correct before connection.) • The system will start reading the storage media automatically after connection and will start playback. • Playback functions for MP3 or WMA files are the same as for playing a CD, as described on pages 14-15. • To remove the USB flash drive/SD card, turn off the power or set the FUNCTION mode to a different mode, then disconnect the USB device/SD card by pulling it safely out of the USB port/SD card slot. IMPORTANT! Before inserting a USB drive or SD card into the main unit, make sure to back up important files stored on the storage medium. The same applies to playback of a CDR/RW disc with important tracks. We accept no liability for loss of data due to inappropriate handling or lack of backup. Recording from PHONO/CD/TAPE to USB/SD • Insert a USB flash drive or SD card – do not insert both. • Press the FUNCTION button and select the mode you want to record from (PHONO, DISC or TAPE). • Press the RECORD button on the remote control and start playing the record, CD or tape. • Press the RECORD/ button to stop recording. www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 17 Other Useful Information Specifications Power AC 230V ~ 50/60Hz Remote Control Batteries 2 x DC 3V UM-4 (AAA) Power Consumption 35W Weight (excl. speakers) Approx. 6.3kg Dimensions (excl. speakers) Approx. 305 (L) x 355 (W) x 450 (H) mm Operation Temperature +5ºC + 40ºC Receiver Section Receiving Bands FM Tuning range 87.5-108 MHz CD/MP3 Section Playback System Compact Disc Digital Audio DAC 1 bit D/A Converter Frequency Response 20-20,000Hz Audio Section 18 Power Output (RMS) Maximum 5W per Channel Speaker Impedance 4 ohms Preset Equaliser Rock - Jazz - Classic - Flat www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 Mini Hi-Fi System with Turntable Repair and Refurbished Goods or Parts Notice Unfortunately, from time to time, faulty products are manufactured which need to be returned to the supplier for repair. Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost. We recommend you save this data elsewhere prior to sending the product for repair. You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process. Please be assured though, refurbished parts or replacements are only used where they meet Tempo’s stringent quality specifications. If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on 1300 886 649 or write to us at: Tempo (Aust) Pty Ltd ABN 70 106 100 252 PO BOX 6056 Frenchs Forest, Sydney, Australia NSW 2086 Tempo Help Desk: 1300 886 649 (Aust) (Operating Hours: Mon-Fri 08:30AM to 06:00PM EST) Email: [email protected] www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015 19 Warranty returns Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product. Product does not work? If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on 1300 886 649 before returning it to the store for a refund. www.tempo.org AUS 1300 886 649 Model: AMHST-014 Product Code: 48293 01/2015