Transcript
Mini Remote INSTEON® Remote Control Keypad, 4 Scene (formerly RemoteLinc 2)
Owners Manual 2342-232, 2444A2WH4 (US) 2342-432 (EU) 2342-532 (AUS/NZ)
Page 1 of 16
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
About Mini Remote ..................................................................................................................................... 3 Features & Benefits .................................................................................................................................... 4 What’s in the Box? ..................................................................................................................................... 4 Required Accessories ................................................................................................................................ 4 Optional Accessories ................................................................................................................................. 5 Getting Started ............................................................................................................................................ 6 Scenes .......................................................................................................................................................... 6 Make Mini Remote (Button) a Controller ................................................................................................... 6 Remove Mini Remote (Button) as a Controller.......................................................................................... 6 Using Mini Remote ...................................................................................................................................... 7 LED Behavior ............................................................................................................................................ 8 Turn Unit On/Off (Pocket Mode) ................................................................................................................ 8 Stuck Button .............................................................................................................................................. 8 Advanced Features ..................................................................................................................................... 8 Add Multiple Responders to a Scene (Multi-Link) ..................................................................................... 8 Remove Multiple Responders from a Scene (Multi-Unlink) ...................................................................... 8 Change Button / Scene Configuration (e.g., Change to 8 Button Mode) .................................................. 9 Turn LED Off (or Back On) ...................................................................................................................... 10 Turn Beeper On During Usage (or Back Off) .......................................................................................... 10 Beeper Behavior ...................................................................................................................................... 11 LED Behavior During Setup .................................................................................................................... 11 Factory Reset .......................................................................................................................................... 11 Specifications ............................................................................................................................................ 12 Troubleshooting ........................................................................................................................................ 13 Certification and Warranty ....................................................................................................................... 14 FCC & Industry Canada Compliance Statement ..................................................................................... 14 Limited Warranty ..................................................................................................................................... 15 Limitations ............................................................................................................................................ 16
Page 2 of 16
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
About Mini Remote Mini Remote is the smallest and most versatile INSTEON remote control in the world. The 4 scene controller can easily be reconfigured to give you toggle control of up to 8 scenes and/or devices. Mini Remote can be:
-
Handheld (wireless remote) Mounted on wall with no trim plate (wireless keypad) Mounted on wall in a single-gang Decorator trim plate (wireless keypad, built-in look) Mounted on wall in a multi-gang Decorator trim plate (add to the number of controllers in your room without hiring an electrician and/or tearing out drywall) Placed on a Tabletop Stand (sold separately) Clipped to your car’s visor with Visor Clip (sold separately)
Status LED
On/Off button pairs (Left Off, Right On)
On/Off switch
Set button
Page 3 of 16
Power/Recharging Jack (Micro-USB, 5VDC)
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
Features & Benefits •
Small, elegant design
•
Super-easy setup
•
Rechargeable battery included
•
Discreet On and Off buttons for 4 scenes
•
Can be reconfigured for 8 scene triggers or 8 scene On/Off toggle control
•
Can be installed into a single Decorator style opening (requires Wall-Mount Bracket, sold separately)
•
Can be used as a table-top controller (requires Tabletop Stand, sold separately)
•
Can be used as a visor-mounted remote control for lights, garage door opener etc. (requires Visor Clip, sold separately)
•
LED blinks green when turning a scene On and red when turning a scene Off
•
Power switch for disabling buttons (“vacation” or “pocket” mode)
•
Stuck Button Mode – saves battery life by going to sleep if button stuck down
•
Beeper for setup ease
•
Recharges with standard USB charger with via Micro-USB Plug (5VDC)
•
9-12 month battery life based on average usage
•
Battery charge LED indicator built-in
•
All settings stored in stable memory which is maintained even without power
•
2 year warranty
What’s in the Box? •
Mini Remote
•
Rechargeable battery (pre-installed)
•
Quick-Start Guide
Required Accessories • •
A micro USB cable for connecting and recharging Mini Remote via USB port on a computer or USB power adapter. If the INSTEON device you intend to control does not receive RF signals (i.e., power line only), you will need at least one dual-band INSTEON device to convert the RF signals to power line signals.
Type A to Micro-B cable (2444B5)
Page 4 of 16
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
Optional Accessories
• • • • • •
Wall Mount Bracket (2444B4) Wall mount your Mini Remote anywhere Gang two or more together for more control Can be installed adjacent to existing wired-in switches Mini Remote can easily be removed for portability or recharging Use with any decorator wall plate
Pair the Wall Mount Bracket with any decorator style wall plate (sold separately) for the perfect wireless wall switch solution.
•
Tabletop Stand (Available in the 2444Bxx kit) Perfect for a nightstand, kitchen counter or coffee table
• •
•
Page 5 of 16
Visor Clip (Available in the 2444Bxx kit) Control your home from your vehicle Turn lights on when you arrive and off as you leave
USB Power Adapter (2444B6) For use with Mini Remote USB Charging Cable and any other device that charges via USB cable
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
Getting Started Fully charge your Mini Remote prior to programming or anytime the unit is not responding. Mini Remote charges via a USB cable (Type A to Micro-B, sold separately). The red charging LED will turn off once the battery has been fully charged (approximately 1 hour). To turn on Mini Remote, simply slide the power switch to the on position. Note: Mini Remote uses a subtle beeper sound to assist setup. It is recommended that you program the unit in a quiet area.
Scenes Scene: One or more INSTEON devices which respond to an INSTEON controller. When the scene is activated (turned “on”), all devices return to the states they were at when the scene was programmed. INSTEON scenes let you activate dramatic lighting moods at the touch of a button. For example, you can set all the lights in a scene to dim to 50% or turn certain lights on while turning others off, all with the tap of a button on any INSTEON Controller. INSTEON scenes are easy to set up, just follow the directions below. Maximum number of scenes in Mini Remote Keypad: 8 (Default is 4) Scene Control Functions supported; On, Off, Press & hold Bright, Press & hold Dim, Double-tap Fast On and Double-tap Fast Off.
Make Mini Remote (Button) a Controller Follow the steps below to control a scene (one or more INSTEON devices). 1) Tap the Mini Remote scene button of choice (on or off buttons will both work) 2) Adjust the scene responder to the “state” you want when the scene is activated from Mini Remote 1 (e.g., 50%, 25% or even OFF) 3) Press & hold Mini Remote’s Set button until Mini Remote beeps Mini Remote’s LED will blink green 4) Press & hold the responder’s Set button until it beeps (or until its LED/load flashes) Mini Remote will double-beep and its LED will stop blinking Responder’s LED will stop blinking (it may also double-beep) 5) Confirm that scene addition was successful by tapping on/off on your chosen Mini Remote button The Responder will toggle between the scene on level and off 6) If you wish to add more responders to Mini Remote, repeat steps 1-5 for each additional scene responder (or see Add Multiple Responders to a scene) 1
If the Responder is a multi-scene device such as a KeypadLinc, tap the scene button you wish to control until its LED is in the desired state (on or off)
Remove Mini Remote (Button) as a Controller If you are no longer going to use an INSTEON responder that is a scene responder of Mini Remote, it is very important that you remove its scene membership. Otherwise, Mini Remote will retry every scene command repetitively, thus creating delays and shortening battery life.
Page 6 of 16
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
1) Tap the Mini Remote scene button of choice (on or off buttons will both work) The Responder will respond 2) Press & hold the Mini Remote’s Set button until it beeps Mini Remote’s LED will blink green 3) Press & hold the Mini Remote’s Set button until it beeps again Mini Remote’s LED will blink red 4) Press & hold the Responder’s Set button until it double-beeps (or LED blinks) Mini Remote will double-beep and its LED will stop blinking 5) Confirm that Unlinking was successful by tapping the scene button on and off The Responder will not respond 6) If you wish to remove multiple responders from Mini Remote, repeat steps 1-5 for each additional responder (or see Remove Multiple Responders from a Scene)
Using Mini Remote 4 Scene Mode (Default) The On/Off button pairs each control all their scene members as follows: Button
Side
Icon
Tap
Press & hold
Double-tap
On
Right
^
Turn scene on
Brighten scene members until released
Turn scene members fullbright instantly
Off
Left
v
Turn scene off
Dim scene members until released
Turn scene members off instantly
8 Scene Toggle Mode Each button will control all its scene members as follows: Last Command Sent
Tap
Press & hold
Double-tap
Off or Dim
Turn scene on
Brighten scene members until released
Turn scene members full-bright instantly
On or Bright
Turn scene off
Dim scene members until released
Turn scene members off instantly
8 Scene Non-Toggle Mode (Always On) Each button will control all its scene members as follows: Tap
Press & hold
Double-tap
Turn scene on
Brighten scene members until released
Turn scene members fullbright instantly
Note: Devices in scenes that respond to the scene trigger by turning off do not respond to scene dim and brighten. Devices in scenes that only support On/Off (such as switches and relays) do not respond to scene dim and brighten.
Page 7 of 16
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
LED Behavior Mini Remote has a two-color LED (Green & Red) which momentarily indicates whether an on or an off is being sent. LED State
Meaning
Blink Green (Once)
On Sent
Blink Red (Once)
Off Sent
Blink Red (for a few seconds)
One or more scene members did not acknowledge (note: scene members may still have heard the scene command and adjusted their settings)
Turn Unit On/Off (Pocket Mode) The Mini Remote features a power switch located next to the Set button. If you plan on carrying the Mini Remote in your pocket it is recommended that you turn it off to prevent buttons from accidentally being pressed. This is also recommended if your Mini Remote will not be in use for long periods of time. Power Switch (right On, left Off)
Stuck Button If a button on Mini Remote is held for more than 4 minutes, the Mini Remote will automatically stop transmitting to preserve battery life. The Mini Remote will automatically turn back on when the button that was depressed is no longer being pressed.
Advanced Features Add Multiple Responders to a Scene (Multi-Link) 1) Tap the Mini Remote scene button of choice (on or off buttons will both work) 2) Press & Hold Set Button for 3 seconds - until you hear a beep Mini Remote’s LED will blink green 3) Tap Set Button Mini Remote’s LED will double-blink green 4) Adjust Each Responder you wish to add to scene, then Press & Hold its Set Button until Mini Remote double-beeps Mini Remote’s LED will continue to double-blink green 5) When all your devices have been added, tap Mini Remote’s Set Button Mini Remote will double-beep and its LED will turn off
Remove Multiple Responders from a Scene (Multi-Unlink) 1) Tap the Mini Remote scene button from which you wish to remove the responder (on or off buttons will both work)
Page 8 of 16
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
2) Press & Hold Set Button for 3 seconds - until you hear a beep Mini Remote’s LED will blink green nd
3) Press & Hold Set Button a 2 time for 3 seconds - until you hear a beep Mini Remote’s LED will blink red 4) Tap Set Button Mini Remote’s LED will double-blink red 5) For each Responder you wish to remove from scene, Press & Hold its Set Button until Mini Remote double-beeps Mini Remote’s LED will continue to double-blink red 6) When all your devices have been removed, tap Mini Remote’s Set Button Mini Remote will double-beep and its LED will turn off
Change Button / Scene Configuration (e.g., Change to 8 Button Mode) 1. Press & Hold Set Button for 3 seconds - until you hear a beep LED will blink green 2. Press & Hold Set Button a 2
nd
time for 3 seconds - until you hear a beep
LED will blink red rd
3. Press & Hold Set Button a 3 time for 3 seconds - until you hear a beep LED will blink green th
4. Press & Hold Set Button a 4 time for 3 seconds - until you hear a beep LED will blink red 5. Tap Set Button LED will double-blink red 6. Press the appropriate button for the desired button/scene configuration
Desired Configuration
Button to Press
8 Button Toggle
Bottom Row, Left Side
8 Button Non-Toggle (Always On)
Top Row, Left Side
4 scene (Default)
Top Row, Right Side
Mini Remote will double-beep and its LED will turn off 7. To confirm the configuration, tap the top left button on Mini Remote several times LED will flash as follows
Page 9 of 16
Flash Pattern
Configuration
Red every tap
4 scene
Green every tap
8 scene Non-Toggle (Always On)
Alternating Green / Red
8 scene Toggle
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
Turn LED Off (or Back On) 1) Press & Hold Set Button for 3 seconds - until you hear a beep LED will blink green nd
2) Press & Hold Set Button a 2 time for 3 seconds - until you hear a beep LED will blink red rd
3) Press & Hold Set Button a 3 time for 3 seconds - until you hear a beep LED will blink green 4) Press the appropriate button for the desired button/scene configuration
Desired LED Mode
Button to Press
LED Off
Top Row, Left Side
LED On (default)
Top Row, Right Side
Mini Remote will double-beep and its LED will turn off
Turn Beeper On During Usage (or Back Off) 1) Press & Hold Set Button for 3 seconds - until you hear a beep LED will blink green nd
2) Press & Hold Set Button a 2 time for 3 seconds - until you hear a beep LED will blink red rd
3) Press & Hold Set Button a 3 time for 3 seconds - until you hear a beep LED will blink green 4) Tap Set Button LED will double-blink green 5) Press the appropriate button for the desired button/scene configuration
Desired Beeper Mode
Button to Press
Off (Default)
Top Row, Left Side
On
Top Row, Right Side
Mini Remote will double-beep and its LED will turn off
Page 10 of 16
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
Beeper Behavior Command
Method
Beeper Disabled (Default)
Beeper Enabled
On
Tap
-
Single Beep
Off
Tap
-
Single Beep
Fast-On
Double-Tap
-
Single Beep
Fast-Off
Double-Tap
-
Single Beep
Begin Bright
Press & hold
-
Single Beep
Begin Dim
Press & hold
-
Single Beep
Setup Action
Beeper
Enter Setup Mode, Transition to next setup mode or Exit Setup Mode
Single Beep
Setup successful, return to Ready Mode
Double-Beep
Return to Ready Mode after a longer than 3 minute timeout
Long Beep (3 seconds)
Failure to add a scene responder
Long Beep (3 seconds)
Exiting Stuck Button
Long Beep (3 seconds)
LED Behavior During Setup Mini Remote has a two-color LED (Green & Red) which displays helpful information. LED State
Meaning
Blinking Green slowly
Add Responder Setup Mode, or LED on/off Setup Mode
Blinking Red slowly
Remove Responder Setup Mode
Double-Blinking Green slowly
Multi-Add Responder Setup Mode, or Beeper on/off Setup Mode
Double-Blinking Red slowly
Multi-Remove Responder Setup Mode, or Keypad Configuration Setup Mode
Factory Reset The factory reset procedure clears all settings from Mini Remote including INSTEON scenes. 1) If possible, unlink (remove) all scene responders prior to performing factory reset 2) Turn Mini Remote off (slide power switch to left) 3) Press & Hold Set Button 4) While continuing to hold the Set Button, turn Mini Remote back on (slide power switch to the right) Mini Remote will beep and LED stays solid green
Page 11 of 16
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
Mini Remote will emit a long beep 5) Continue to Hold Set Button until the long beep stops LED turns solid red 6) Release Set Button Mini Remote will double-beep and its LED will turn off
Specifications General Product Name
Mini Remote 4-Scene (formerly RemoteLinc 2)
Brand
INSTEON
Manufacturer Product Number
2342-232, 2444A2WH4 (US) 2342-432 (EU) 2342-532 (AUS/NZ)
UPC
813922010701 (US) 813922012583 (EU) 813922012590 (AUS/NZ)
FCC ID
SBP2444A
Patent Number
Protected under U.S. and foreign patents (see www.insteon.com/patents)
Warranty
2 Years, Limited
INSTEON Scenes
4 (default), configurable to 8
Scene Configurations
4 On/Off (default), 8 Toggle or 8 Always On
Maximum scene Links
400
Scene Commands Supported
On
Off
Begin Brightening
Begin Dimming
End Brightening
End Dimming
Fast On
Fast Off
Software Configurable
Yes
X10 Support
None
Operation LED Type
Two-color: Green and Red
LED during Use
Green Flash Once
On (sent) Bright Fast-On
Red Flash Once
Off Dim
Page 12 of 16
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
Fast-Off Red Blink for ~3 Seconds
Scene Acknowledge Missing
LED
Always used for setup, default On during use
Setup Button
Yes
On/Off Switch
Yes
Beeper
Yes, configurable
Battery Charging LED
Yes, Embedded (shines red through case during charge)
RF Range
50’ Line-of-Sight
RF Frequency
915MHz (US) 869MHz (EU) 921MHz (AUS/NZ)
Retains all settings without power
Yes, all saved in Non-volatile EEPROM
Mechanical Color
White
Plastic
UV Stabilized ABS
Dimensions
2.6" H x 1.3" W x 0.39" D
Weight
1 Oz.
Button Style
Plastic Paddles over Contact Switches
Optional Hardware
Wall Mount Tabletop Stand Visor Clip
Operating Environment
Indoors, 32°F to 104°F, up to 85% relative humidity
Electrical Battery type
3.7 VDC Lithium Polymer, Rechargeable, non-replaceable
Battery life (between charges)
9-12 months under standard usage
Battery Re-charging cycles
> 500 recharging cycles
Recharging jack
Standard, Micro-USB, 5VDC
Recharging time
1 hour
Troubleshooting Problem
Mini Remote won’t add a scene responder
Page 13 of 16
Possible Cause
Solution
Mini Remote may be out of range of nearest dual-band INSTEON device (hopper)
Try moving an access point or other dual-band plug-in module closer to Mini Remote
The INSTEON signal may not be getting to the “vicinity” of Responder
Make sure phases are bridged, add additional INSTEON devices and/or move around existing INSTEON devices
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
Problem
Possible Cause Large appliances, such as refrigerators or air conditioners, may be producing electrical noise on the power line Other electrical devices, such as computers, televisions, or power strips, may be absorbing the INSTEON signal
Solution
Install a power line noise filter (e.g., #1626-10) to filter electrical noise and minimize signal attenuation
Ramp Rate may be Extremely Slow Mini Remote will not turn a Or Responder On (it may turn Responder may be Linked at OFF it off)
Re-link to Responder with fast Ramp Rate
Responder’s Load doesn’t appear to turn on right away
The Ramp Rate may be set too slow
Re-link to Responder with fast Ramp Rate
Responder(s) is taking a long time to respond to a Mini Remote
Remove all unused Responders from the Mini Remote. HINT: If you are using home automation Mini Remote may be sending software, you can easily check scene membership commands to a Responder(s) that is no and eliminate unnecessary Links longer in use If the above doesn’t work, try the solutions for “Mini Remote will not turn a Responder On”
Mini Remote blinks red after I turn a scene On or Off
One or more scene members not responding Monitor for recurrence and if recurs: Or a) Remove all scene responders that are no One or more scene members not longer in use, or responding AND HouseLinc (or other b) Add INSTEON devices for better signaling software) is attempting to communicate to Mini Remote Power cycle: Turn unit Off (slide switch to left), wait 10 seconds and turn back on
Mini Remote will not respond
Something may have caused the Mini Remote to unexpectedly stop responding
Perform a factory reset on Mini Remote
If you have tried these solutions, reviewed this Owner’s Manual, and still cannot resolve an issue you are having, please call: 866-243-8022
Certification and Warranty FCC & Industry Canada Compliance Statement This device complies with FCC Rules Part 15 and Industry Canada RSS-210 (Rev. 7). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The digital circuitry of this device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio and television reception. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause such interference, which can be verified by turning the device off and on, the user is encouraged to eliminate the interference by one or more of the following measures: - Re-orient or relocate the receiving antenna of the device experiencing the interference
Page 14 of 16
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
- Increase the distance between this device and the receiver - Connect the device to an AC outlet on a circuit different from the one that supplies power to the receiver - Consult the dealer or an experienced radio/TV technician WARNING: Changes or modifications to this device not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. DECLARATION OF CONFORMITY Hereby, INSTEON declares that this device is in compliance with the essential requirements and other relevant provisions of the following Directives: 1) Electromagnetic Compatibility Directive 2004/108/EC 2) Hazardous Substance Directive 2005/95/EC Technical data and copies of the original Declaration of Conformity are available and can be obtained from INSTEON; 16542 Millikan Ave, Irvine, CA, USA.
User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of INSTEON products. Consumers are required to comply with this notice for all electronic products bearing the following symbol:
Environmental Information for Customers in the European Union European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.
DECLARATION OF CONFORMITY TO R&TTE DIRECTIVE 1999/5/EC for the European Community, Switzerland, Norway, Iceland and Liechtenstein Product category: general consumer (category 3). English: This equipment is in compliance with the essential requirements and other relevant provisions of the European R&TTE Directive 1999/5/EC Deutsch [German]: Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU. Nederlands [Dutch]: Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC. Svenska [Swedish]: Denna utrustning står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Français [French]: Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC Español [Spanish]: Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/CE. Português [Portuguese]: Este equipamento está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC. Italiano [Italian]: Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE. Norsk [Norwegian]: Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF. Suomi [Finnish]:Tämä laite tÿttää direktiivin 1999/5/EY olennaiset vaatimukset ja on siinä asetettujen muiden laitetta koskevien määräysten mukainen. Dansk [Danish]: Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF. Polski [Polish]: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami okreslonymi Dyrektywą UE: 1999/5/EC Limited Warranty Seller warrants to the original consumer purchaser of this product that, for a period of one year from the date of purchase, this product will be free from defects in material and workmanship and will perform in substantial conformity to the description of the product in this Owner’s Manual. This warranty shall not apply to defects or errors caused by misuse or neglect. If the product is found to be defective in material or workmanship, or if the product does not perform as warranted above during the warranty period, Seller will either repair it, replace it, or refund the purchase price, at its option, upon receipt of the product at the address below, postage prepaid, with proof of the date of purchase and an explanation of the defect or error. The repair, replacement, or refund that is provided for above shall be the full extent of Seller’s liability with respect to this product. For repair or replacement during the warranty period, call the INSTEON Gold Support Line at 866-243-8022 with the Model # and Revision # of the device to receive an RMA# and send the product, along with all other required materials to:
Page 15 of 16
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
INSTEON ATTN: Receiving 16542 Millikan Ave. Irvine, CA 92606-5027 Limitations The above warranty is in lieu of and Seller disclaims all other warranties, whether oral or written, express or implied, including any warranty or merchantability or fitness for a particular purpose. Any implied warranty, including any warranty of merchantability or fitness for a particular purpose, which may not be disclaimed or supplanted as provided above shall be limited to the one-year of the express warranty above. No other representation or claim of any nature by any person shall be binding upon Seller or modify the terms of the above warranty and disclaimer. Home automation devices have the risk of failure to operate, incorrect operation, or electrical or mechanical tampering. For optimal use, manually verify the device state. Any home automation device should be viewed as a convenience, but not as a sole method for controlling your home. In no event shall Seller be liable for special, incidental, consequential, or other damages resulting from possession or use of this device, including without limitation damage to property and, to the extent permitted by law, personal injury, even if Seller knew or should have known of the possibility of such damages. Some states do not allow limitations on how long an implied warranty lasts and/or the exclusion or limitation of damages, in which case the above limitations and/or exclusions may not apply to you. You may also have other legal rights that may vary from state to state. Protected under U.S. and foreign patents (see www.insteon.com/patents) © Copyright 2013 INSTEON, 16542 Millikan Ave., Irvine, CA 92606, 866-243-8022, www.insteon.com
Page 16 of 16
2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 2/20/2013 10:55 AM
